Fineline & Broadline PUBLICATION Strip GRILLES JUNE 0 Features - Fineline or Broadline Appearances. - 6 Different Frame Options. - 0, or 0 Angles. - Single Units or Continuous Runs. - Multiple Fixing Options. - All Extruded aluminium Construction.
Fineline & Broadline Strip Introduction Gilberts L Series of provides a range of multi function units designed for both supply and extract purposes and suitable for ceiling, sidewall and cill mounting applications. Attractively designed and styled the L Series is suprisingly flexible offering a choice of fineline mm bars or Broadline bars in a selection of 6 different border styles. Additional options can then be selected in terms of differing blade angles and blade on the core. Available heights range from 0mm rising in mm increments up to 600mm Features - Fineline or Broadline Appearances. - 6 Different Frame Options. - 0, or 0 Angles. - Single Units or Continuous Runs. - Multiple Fixing Options. - All Extruded aluminium Construction. with lengths available up to metres in a single unit. Over metres, for continuous runs, units are supplied in sections and can be designed to incorporate additional features such as active/dummy sections and mitred corners. THE LINEAR STRIP GRILLE range comprises of 6 unit types: TYPE LG: Strip Grille comprising Fineline mm or Broadline wide bars set on in a mm flange border frame. s angled at 0, or on Fineline only 0. TYPE LGN: As LG Series except in a flange border frame with concealed bracket fixing. TYPE LC: Strip Grille core only comprising Fineline mm or Broadline wide bars set on. s angled 0, or on Fineline only, 0. TYPE LH: Strip Grille comprising Fineline mm or Broadline wide bars set on spring clip fixed in a housing frame. s angled at 0, or on Fineline only 0. Sidewall or sill mounting applications only. TYPE L: Strip Grille as Type LG but with bars flush level with flange face. Ideally suited for horizontal cill type applications. TYPE LN: Strip Grille as Type LGN but with bars flush level with flange face. Ideally suited for horizontal cill type applications. References Used Selection Procedure Manufactured throughout from extruded aluminium the L Series is available with a wide variety of ancillary items and fixing options. Opposed blade volume control is available with either screwdriver or permanant knob operation and hinged doors or removable sections can even be incorporated into the grille to allow access to any equipment behind ie: radiator valves. Pressure: All pressures are in Pa (N/m ) Sound: Measured in average dba level Having determined the most suitable position of the linear grille to give the best effective distribution.. Determine the volume in m /sec per metre length.. Establish the throw required to prevent overblow this should be approx. % of the distance to the wall opposite or if outlets are opposed to one another this should be approx. one third of the distance between them.. Check the acceptable sound level from the chart opposite.. From the selection Nomogram determine a suitable grille width to suit the above criteria. Example: Select a suitable supply linear outlet for an office measuring m x 6m x.m high. The supply outlet is to be positioned at high level along the 6m wall. Duty 0.m /s, throw required is approx 6m. Max noise recommended dba. From Sizing Nomogram Select an LG/0/ Series m x 0mm in length. This equates to approx 0.66m /s/m with a throw of ( x. =.), sound level ( + = 0). Free Area Standard fixing, as illustrated is typically screw through flange or lay in according to type, although alternative fixings such as concealed bracket, quick release or spring clip (for cill applications) can also be specified. Standard finish is a Polyester Powder White with other colours and finishes available on request. Area to be served Recommended Maximum NC Levels Sound Broadcasting - 0 Recording Studios, TV (Audience Studios) 0 - Lecture Theatres, Cinemas, Concert Halls, Boardroom/Ex Offices Lounge, Conference Room, Court Room, Churches, Private Bedrooms - 0 Operating Theatres, Hospital Wards, Staff Room, Class Rooms, Ballroom, Banquet Room, Library, Bank, Museum, Offices 0-0 Restaurants, Department Stores, Computer Suite, Washroom Toilet - 0 Laundries, Kitchens, Swimming Pools, Sports Arena 0 - Garage, Light Engineering Workshop - 0 Heavy Engineering Workshop 0-6 Model K Factor LG/0/, L/0/, LH/0/, LN/0/ % LG//, L//, LH//, LN// % LG/0/, L/0/, LH/0/, LN/0/ % Model K Factor LG/0/., L/0/., LH/0/., LN/0/. LG//., L//., LH//., LN//. 6% LG/0/., L/0/., LH/0/., LN/0/. 0% Model K Factor LG/0/6, L/0/6, LH/0/6, LN/0/6 % LG//6, L//6, LH//6, LN//6 6% LG/0/6., L/0/6., LH/0/6., LN/0/6. 6% LG//6., L//6., LH//6., LN//6. 6%
Fineline mm Bars s 0 s TYPE LG - STANDARD BORDER (STD SCREW FIXING ILLUSTRATED) Overall size = List Length or Height + mm List Length or Height - mm or mm mm 0 mm mm mm mm (max*) TYPE LG/0/ TYPE LG// TYPE LG/0/ TYPE LG/0/. TYPE LG//. TYPE LG/0/. TYPE LGN - NARROW BORDER (STD CONCEALED BRACKET FIXING ILLUSTRATED) s Overall size = List Length or Height + List Length or Height - mm or mm mm 0mm TYPE LGN/0/ TYPE LGN/0/. mm mm TYPE LGN// TYPE LGN//. mm (max* inc. CBF) * Max depth - Depth may be lower depending on damper fitment. Please check where necessary
Fineline & Broadline Strip Fineline mm Bars s 0 s TYPE L - FLUSH BORDER (STD SCREW FIXING ILLUSTRATED) Overall size = List Length or Height + mm List Length or Height - mm or mm mm 0 mm TYPE L/0/ mm mm TYPE L// TYPE L/0/ mm (max*) TYPE L/0/. TYPE L//. s TYPE L/0/. TYPE LN - NARROW FLUSH BORDER (STD CONCEALED BRACKET FIXING ILLUSTRATED) Overall size = List Length or Height + List Length or Height - mm or mm mm 0mm TYPE LN/0/ TYPE LN/0/. mm mm TYPE LN// TYPE LN//. mm (Max* inc. CBF) * Max depth - Depth may be lower depending on damper fitment. Please check where necessary
Fineline mm Bars TYPE LH - REMOVABLE SPRING CLIP CORE IN HOUSING FRAME s 0 s Aperture Size = List length x Height (mm) Overall Size = List Length or Height - or mm mm 0 Max height 00mm with 0 blade mm mm mm mm (max*) TYPE LH/0/ TYPE LH/0/. TYPE LH// TYPE LH//. TYPE LC - CORE ONLY TYPE LH/0/ TYPE LH/0/. SIZE LIMIT : Spring clip core means sidewall or cill mounting only with a Max height limit of 00mm. Larger heights only available with a screw fix core. s 0 s Overall size = List Length or Height -mm or mm mm 0 mm TYPE LC/0/ TYPE LC/0/. TYPE LC// TYPE LC//. TYPE LC/0/ TYPE LC/0/.
Fineline & Broadline Strip Broadline Bars TYPE LG - STANDARD BORDER (STD SCREW FIXING ILLUSTRATED) s Overall size = List Length or Height + mm List Length or Height - mm or mm mm mm 0mm (max*) TYPE LG/0/6 TYPE LG/0/6. TYPE LG//6 TYPE LG//6. TYPE LGN - NARROW BORDER (STD CONCEALED BRACKET FIXING ILLUSTRATED) s Overall size = List Length or Height + List Length or Height - mm or mm 0mm (To CB Rail) mm mm mm (max* inc. CBF) TYPE LGN/0/6 TYPE LGN/0/6. TYPE LGN//6 TYPE LGN//6. * Max depth - Depth may be lower depending on damper fitment. Please check where necessary 6
Broadline Bars TYPE L - FLUSH BORDER (STD SCREW FIXING ILLUSTRATED) s Overall size = List Length or Height + mm List Length or Height - mm or mm mm mm 0mm (max*) TYPE L/0/6 TYPE L/0/6. TYPE L//6 TYPE L//6. TYPE LN - NARROW FLUSH BORDER (STD CONCEALED BRACKET FIXING ILLUSTRATED) s Overall size = List Length or Height + List Length or Height - mm or mm 0mm (To CB Rail) mm mm mm (max* inc. CBF) TYPE LN/0/6 TYPE LN/0/6. TYPE LN//6 TYPE LN//6. * Max depth - Depth may be lower depending on damper fitment. Please check where necessary
Fineline & Broadline Strip Broadline Bars TYPE LH - REMOVABLE SPRING CLIP CORE IN HOUSING FRAME s Aperture Size = List length x Height (mm) List Length or Height - Overall Size TYPE LH/0/6 or mm SIZE LIMIT : Spring clip core means sidewall or cill mounting only with a Max height limit of 00mm. Larger heights only available with a screw fix core TYPE LH//6 TYPE LH/0/6. mm TYPE LH//6. mm mm TYPE LC - CORE ONLY s mm (max*) * Max depth - Depth may be lower depending on damper fitment. Please check where necessary Overall size = List Length or Height -mm TYPE LC/0/6 or mm TYPE LC//6 TYPE LC/0/6. TYPE LC//6. mm VERTICAL AIR DEFLECTION Available on Type L & LN only DEPTH Varies with unit type and accessories. Please check with office HINGED ACCESS DOOR (Type L & LN Only) (Standard 0mm long) Individually adjustable air deflection blades behind grille face... REF: AD TYPE HA TYPE HB
Fineline SERIES L Pitch AIR FLOW RATE m /sec/metre.0 0. 0. 0. 0.6 0. 0. 0. 0. 0. 0. 0.0 0.0 0.0 0.06 0.0 SIDEWALL THROW IN METRES 0 6 TERMINAL VELOCITY 0.m/s 0 0 60 0 6 0 0 0 CILL SOUND LEVEL dba JET VELOCITY. GRILLE TOTAL PRESSURE N/m 0 0 0 0 0 0 GRILLE WITH DAMPER + 0% ALL DATA BASED ON. LONG UNIT ISOTHERMAL CONDITIONS DAMPERS FULLY OPEN 0 6 0 0 00 0 00 GRILLE WIDTH - mm TYPE LG/0/ LG// LG/0/ LGN/0/ LGN// L/0/ L// L/0/ LN/0/ LN// LC/0/ LC// LC/0/ LH/0/ LH// LH/0/ 0.0 0.0 0.0 PRESSURE CORRECTION FACTORS GRILLE TYPE TOTAL PRESSURE LG/0/ LN/0/ LGN/0/ LH/0/ AS SCALE L/0/ LC/0/ LG// LN// LGN// LH// x. L// LC// LG/0/ LH/0/ L/0/ LC/0/ x. SOUND CORRECTION FACTORS THROW CORRECTION FACTORS DIFFUSER LENGTH DECIBEL IN METRES CORRECTION 0. -.0 -.66 -.0 +. -.0 + OVER METRES + DIFFUSER LENGTH THROW IN METRES CORRECTION 0. x. 0.66 -.0 x..66 -.0 x..0 OVER METRES x. NB: Units with a º blade deflection are not suitable for medium to high velocities on extract. Please check with the office.
Fineline & Broadline Strip Fineline & Broadline AIR FLOW RATE m /sec/metre SERIES L L6 L with mm Pitch L6 with mm Pitch.0 0. 0. 0. 0.6 0. 0. 0. 0. 0. 0. 0.0 0.0 0.0 0.06 0.0 SIDEWALL THROW IN METRES 0 6 TERMINAL VELOCITY 0.m/s 0 0 60 0 6 0 0 0 CILL SOUND LEVEL dba JET VELOCITY. GRILLE TOTAL PRESSURE N/m 0 0 0 0 0 0 GRILLE WITH DAMPER + 0% ALL DATA BASED ON. LONG UNIT ISOTHERMAL CONDITIONS DAMPERS FULLY OPEN 0 6 0 0 00 0 00 GRILLE WIDTH - mm TYPE LG/0/. LG//. LG/0/. LGN/0/. LGN//. L/0/. L//. L/0/. LN/0/. LN//. LC/0/. LC//. LC/0/. LH/0/. LH//. LH/0/. LG/0/6. LG//6. LGN/0/6. LGN//6. L/0/6. L//6. LN/0/6. LN//6. LC/0/6. LC//6. LH/0/6. LH//6. 0.0 0.0 0.0 PRESSURE CORRECTION FACTORS GRILLE TYPE TOTAL PRESSURE LG/0/. LG/0/6. LGN/0/. LGN/0/6. L/0/. L/0/6. LN/0/. LN/0/6. AS SCALE LC/0/. LC/0/6. LH/0/. LH/0/6. LG//. LG//6. LGN//. LGN//6. L//. L//6. LN//. LN//6. x. LC//. LC//6. LH//. LH//6. LG/0/. L/0/. LC/0/. x. LH/0/. SOUND CORRECTION FACTORS DIFFUSER LENGTH DECIBEL IN METRES CORRECTION 0. -.0 -.66 -.0 +. -.0 + OVER METRES + THROW CORRECTION FACTORS DIFFUSER LENGTH THROW IN METRES CORRECTION 0. x. 0.66 -.0 x..66 -.0 x..0 OVER METRES x.
Broadline SERIES L6 Pitch AIR FLOW RATE m /sec/metre.0 0. 0. 0. 0.6 0. 0. 0. 0. 0. 0. 0.0 0.0 0.0 0.06 0.0 SIDEWALL THROW IN METRES 0 6 TERMINAL VELOCITY 0.m/s 0 0 60 0 6 0 0 0 CILL SOUND LEVEL dba JET VELOCITY. GRILLE TOTAL PRESSURE N/m 0 0 0 0 0 0 GRILLE WITH DAMPER + 0% ALL DATA BASED ON. LONG UNIT ISOTHERMAL CONDITIONS DAMPERS FULLY OPEN 0 6 0 0 00 0 00 GRILLE WIDTH - mm TYPE LG/0/6 LG//6 LGN/0/6 LGN//6 L/0/6 L//6 LN/0/6 LN//6 LC/0/6 LC//6 LH/0/6 LH//6 0.0 0.0 0.0 PRESSURE CORRECTION FACTORS GRILLE TYPE TOTAL PRESSURE LG/0/6 LN/0/6 LGN/0/6 LC/0/6 AS SCALE L/0/6 LH/0/6 LG//6 LN//6 LGN//6 LC//6 x. L//6 LH//6 SOUND CORRECTION FACTORS DIFFUSER LENGTH DECIBEL IN METRES CORRECTION 0. -.0 -.66 -.0 +. -.0 + OVER METRES + THROW CORRECTION FACTORS DIFFUSER LENGTH THROW IN METRES CORRECTION 0. x. 0.66 -.0 x..66 -.0 x..0 OVER METRES x.
Fineline & Broadline Strip Ordering Specification SERIES: LG, LGN, LC, LH, L, LN BLADE ANGLE: 0, or 0 L AD HA 00 x 0 DO CB PPC RAL 0 0% GLOSS (STANDARD FINISH) BLADE WIDTH: Fineline... Broadline...6 BLADE PITCH: (Standard...) Optional Fineline... Optional Broadline... Vertical Air Deflection...AD HINGED ACCESS DOOR- 0mm Long (plus side facing towards on & 0 degree grilles): Type A...HA Type B...HB Type A (left hand)...hal Type A (right hand)...har Type B (left hand)...hbl Type B (right hand)...hbr Size (mm - Length x Height) Accessories Opposed Damper...DO Knob Operated Damper...DK For Matt Black finish on damper add ref. BB i.e: DO/BB SPECIAL FIXING OPTIONS: Concealed Bracket...CB Spring Clip...SC Quick Release...QR Leg Bracket...LB FINISH (Please Specify) NUMBER REQUIRED Fixing LG & L Series: Flange screw fixing using self tapping screws. LGN & LN Series: Concealed bracket fixing. LC Series: Typically for lay in application no fixing provided as standard. LH Series: Screw fix through frame Standard Finish: Special finishes: Polyester powder coat white RAL 0 0% gloss. Polyester powder finish to stock BS/RAL colour. Shadowline finish - inners matt black and face mill brush finished. Other optional fixings include concealed bracket and quick release fixings. Spring Clip push fit fixings are available but are only suitable for Cill applications. Size Range GILBERTS Head Office and Works GILBERTS (BLACKPOOL) LTD Gilair Works, Clifton Road, Blackpool. Lancashire FY QT. Telephone: (0) 66 Fax: (0) 6 e-mail: sales@gilbertsblackpool.com Web: www.gilbertsblackpool.com Available heights range from 0mm rising in mm increments upto 600mm with lengths available up to metres in a single unit. Finish Gilberts (Blackpool) Ltd reserve the right to alter the specification without notice. For our latest product data please visit www.gilbertsblackpool.com. The information contained in this leaflet is correct at time of going to press 0.