Програм вентилације Ventilation Product Range ТЕХНИЧКИ КАТАЛОГ / CATALOGUE J.1.В ai R evolution јун 2016 / june 2015
Centrifugalni ventilatori sa jednim usisom i kutaloidnim lopaticama / Single Inlet Centrifugal Fans With Sparse Wide Scooped Blades J 1450 [o/min] / rpm model Pogodni su za industrijske hale, restorane, profesionalne kuhinje HASAP (HACCP) standard, ali se ne mogu koristiti za agresivne sredine. Ventilaciono kolo,sa kutaloidnim lopaticama, pogodno je za čišćenje (ili održavanje) i sprečavanje nagomilavanja masnoće. Ventilatori mogu biti izrađeni od visokokvalitetnog pocinkovanog čeličnog lima (osim kod modela J 7,5 koje je standardno ofarban u RAL) ili od INOX 304. Visoko kvalitetan elektromotor projektovan specijalno za ventilatore, montiran je na antivibracione gumene nosače; zaštita motora IP55-Klase F. Napajanje: 220V-50Hz ili 380V-50Hz. Svi ventilatori opciono dostupni ofarbani u RAL boji. Postoji mogućnost montaže u aeroboksu. Regulisanje monofaznih modela se vrši reostatom (J 0,5 reostatom REM 5: modeli J 1,0 i 1,5 reostatom REM 10, a modeli J 2,0 i 3,0 reostatom REM 16), kod trofaznih modela regulacija se vrši inverterom. Za trofazne ventilatore obavezna je ugradnja termičke zaštite. Visoko kvalitetan elektromotor specijalno projektovan za ventilatore, montiran na antivibracione gumene nosače; zaštita motora IP55-Klase F. High quality electric motor specially manufactured for fans, mounted on anti-vibration rubber feet; protection IP55-Class F. Suitable for industrial applications, restaurants, coercial kitchens HACCP standard, but cann't be used in chemically aggressive environment. Impeller with sparse wide scooped blades for easy cleaning and prevention of oily residue build-up. Fans mode of high quality galvanised steel sheet (apart from model 7,5 which is painted in RAL as standard) or made in INOX 304. High quality electric motor specially manufactured for fans, mounted on antivibration rubber feet; protection IP55-Clas F. Input volt-age: 220V-50Hz. Painted in RAL color as standard. Can be delivered within fan section. Single phase models regulation with speed controller (model J 0,5 with REM 5, models J 1,0 i 1,5 with REM 10, models J 2,0 and 3,0 with REM 16) and three phase models with inverter. Thermal protection must be instaled for three phase models. * * * * MODEL: J kw Tehničke karakteristike / Technical Characteristics 1450 [o/min] / rpm Inlet () Flange Outlet Flange Internal () Εxternal () Air flow m 3 /h Voltage VOLT 0,5 0,37 200 205 x 245 255 x 295 2.500 230/400 1,0 0,75 250 225 x 345 275 x 395 5.000 230/400 1,5 1,10 250 255 x 345 305 x 395 6.000 230/400 2,0 1,50 300 275 x 405 325 x 455 8.000 230 2,0 1,50 300 275 x 405 325 x 455 8.000 400 3,0 2,20 300 275 x 405 325 x 455 9.000 400 3,0 2,20 300 275 x 405 325 x 455 9.000 230 3,0 2,20 350 325 x 405 375 x 455 10.000 400 4,0 3,00 350 325 x 455 375 x 505 11.000 400 5,5 4,00 350 325 x 455 375 x 505 13.000 400 7,5 5,00 450 570 x 440 630 x 500 16.000 400 * Modeli uvek dostupni na lageru Pažnja: Za trofazne ventilatore obavezna je ugradnja termičke zaštite. Caution: Thermal protection must be instaled for three phase models DIMENZIJE / DIMESNIONS Inlet Flange Height Length Width Hο Lο Wο 20 0,5 46 55 47 17 41 28 25 1,0 57 70 52 23 47 32 25 1,5 57 70 55 23 49 32 30 2,0 68 82 62 26 57 40 30 3,0 68 82 62 26 57 40 35 3,0 68 82 70 24 61 40 35 4,0 76 90 70 29 61 44 35 5,5 76 90 70 29 61 44 45 7,5 100 90 99 30 79 51 H Ho Lo W Wo L R 0 ο R 90 ο R 270 ο L 0 ο L 90 ο L 270 ο Cene možete pronaći u cenovniku / Prices are in pricelist J.1. JAKKA - Ventilacija 1
Centrifugalni ventilatori sa jednim usisom i kutaloidnim lopaticama / Single Inlet Centrifugal Fans With Sparse Wide Scooped Blades RADNE KRIVE / PERFORMANCE CURVES MODEL: J (1450 rpm) Ø200 0,5 1450 o/min Ø250 1,0 1450 o/min Ø250 1,5 1450 o/min Ø300 2,0 1450 o/min Ø300 3,0 1450 o/min Ø350 4,0 1450 o/min Ø350 5,5 1450 o/min Ø450 7,5 1450 o/min 2
J 900 o/min / rpm model Visoko kvalitetan elektromotor specijalno projektovan za ventilatore, montiran na antivibracione gumene nosače; zaštita motora IP55-Klase F. / High quality electric motor specially manufactured for fans, mounted on anti-vibration rubber feet; protection IP55-Class F. Pogodni su za industrijske hale, restorane, profesionalne kuhinje HASAP (HACCP) standard, ali se ne mogu koristiti za agresivne sredine. Ventilaciono kolo,sa kutaloidnim lopaticama, pogodno je za čišćenje (ili održavanje) i sprečavanje nagomilavanja masnoće. Ventilatori mogu da budu izrađeni od visoko kvalitetnog pocinkovanog čeličnog lima (osim modela J 7,5 koji je standardno ofarban u RAL) ili od INOX 304. Viso kvalitetan elektromotor projektovan specijalno za ventilatore, montiran je na antivibraciotivibracione gumene nosače; zaštita motora je IP55, klase F. Napajanje: 220V-50Hy ili 380V-50Hy. 350.350. Svi ventilatori opciono su dostupni ofarbani u RAL boju. Postoji mogućnost montaže u aeroboksu. Regulisanje monofaznij modela se vrši reostatom (J 0,5 reostatom REM 5; modeli J 1,0 i 1,5 reostatom REM 10, a modeli J2,0 i 3,0 reostatom REM16), kod trofaznih modela regulacija se vrši inverterom. Za trofazne ventilatore obavezna je ugradnja termičke zaštite. / Suitable for industrial applications, restaurants, coercial kitchens HACCP standard, but cann't be used in chemically aggressive environment. Impeller with sparse wide scooped blades for easy cleaning and prevention of oily residue build-up. Fans made of high quality galvanised steel sheet (apart form model J 7,5 which is painted in RAL as standard) or made in INOX 304 (standard). High quality electric motor specially manufactured for fans, mounted on anti-vibration rubber feet; protection IP55-Class F. Input voltage: 220V or 380V-50Hz. All models available in RAL color. Can be delivered within fan section. Single phase models regulation with speed controller (model J 0,5 with REM 5, models J 1,0 i 1,5 with REM 10, models J 2,0 and 3,0 with REM 16) and three phase models with inverter. Thermal protection must be instaled for three phase models. Cene možete pronaći u cenovniku / Prices are in pricelist J.1. JAKKA - Ventilacija
Centrifugalni ventilatori sa jednim usisom i kutaloidnim lopaticama / Single Inlet Centrifugal Fans With Sparse Wide Scooped Blades RADNE KRIVE / PERFORMANCE CURVES Ø250 0,5 900 o/min MODEL: J (900 rpm) Ø300 1,0 900 o/min Ø300 1,5 900 o/min Ø350 2,0 900 o/min Ø350 3,0 900 o/min Ø450 4,0 900 o/min Ø450 5,5 900 o/min Dijagram za 3phase trofazno povezivanje connection / 3phase diagrams connection diagram R S T R S T Delta veza / connection Y veza / connection Dijagram za monofazno 1phase connection povezivanje / 1phase diagrams connection diagram L N L N Desna rotacija / Right rotation Leva rotacija / Left rotation 4
Centrifugalni ventilatori sa jednim usisom i Sirocco radnim kolom / Single Inlet Centrifugal Fans With Forward Curved Blades (Sirocco Type) Visoko kvalitetan elektromotor specijalno projektovan za ventilatore; zaštita motora IP55-Klase F. / High quality electric motor sp.ecially manufactured for fans; protection IP55-Class F MODEL: JS 1450, 2800 o/min / rpm model Pogodni su za laboratorije, restorane, radionice, kao i za odsis sa mašina iy drvne industrije. Kućište je od visokokvalitetnog presovanog lima, zaštićeno elektrostatičkim epoksilnim bojama. Visoko kvalitetan elektromotor specijalno projektovan za ventilatore; zaštita motora IP55, klase F. Napajanje: 220V-380V-50Hz. Standardno ofarbani u RAL boju. Može da se ugradi u aero kutiju. Regulisanje monofaznih modela se vrši reostatom (do JS 0, 5 reostatom REM 5, do JS 1,5 reostatom REM 10, a modeli JS 2,0 reostatom REM 16), kod trofaznih modela relacija se vrši inverterom. Suitable for laboratories, restaurants, workshops. Housing made of high quality pressed steel sheet protected by electrostatic, epoxy paint. High quality electric motor specially manufactured for fans, mounted on anti-vibration rubber feet; protection IP55-Class F. Input voltage: 220V or 380V-50Hz. All models available in RAL color. Can be delivered within fan section. Single phase models regulation with speed controller (model J 0,5 with REM 5, models J 1,0 i 1,5 with REM 10, models J 2,0 and 3,0 with REM 16) and three phase models with inverter. * * * * MODEL: JS kw kw Inlet () Flange Inlet () Flange Outlet Flange Internal () Εxternal () Tehničke karakteristike Technical Characteristics / Technical Characteristics 2800 RPM - 2800 o/min / rpm Outlet Flange Internal () Εxternal () Impeller () Impeller () Air Flow m 3 /h Air Flow m 3 /h Total pressure Pa Total pressure Pa Voltage VOLT 0,25 0,18 120 95 x 110 145 x 160 133 x 52 380 130 230/400 0,33 0,25 120 120 x 150 170 x 200 160 x 62 900 160 230/400 0,33 0,25 140 120 x 150 170 x 200 180 x 75 1.250 200 230/400 0,50 0,37 160 135 x 165 185 x 215 200 x 82 1.750 260 230/400 0,50 0,37 180 140 x 175 190 x 225 225 x 92 2.550 350 230/400 MODEL: JS Voltage VOLT 0,25 0,18 100 95 x 110 145 x 160 133 x 52 450 340 230 0,25 0,18 120 95 x 110 145 x 160 133 x 52 780 570 230/400 0,50 0,37 120 120 x 150 170 x 200 160 x 62 1.600 620 230/400 0,75 0,55 140 120 x 150 170 x 200 180 x 74 2.500 820 230/400 1,50 1,10 160 135 x 165 185 x 215 200 x 82 3.200 950 230/400 2,00 1,50 180 140 x 175 190 x 225 225 x 92 3.500 1.600 230/400 Inlet Flange DIMENZIJE Dimensions / DIMESNIONS visina Height / height dužina Length / lenght širina Width / width 100 300 320 230 120 300 320 230 140 390 380 300 160 420 400 330 180 460 420 360 Tehničke karakteristike Technical Characteristics / Technical Characteristics 1450 RPM - 1450 o/min / rpm H W L DODATNA Αccessories OPREMA / ACCESORIES Cene možete pronaćiu cenovniku / Prices are in pricelist J.1. JAKKA - Ventilacija 26 * Modeli uvek dostupni na lageru 5
Centrifugalni transportni ventilatori sa jednim usisom / Single Inlet High Pressure Centrifugal Fans MODEL: JT 2800 o/min /rpm model Pogodni su za izvlačenje i filtraciju vazduha koji sadrži prašinu, trinju, plastiku i ostale fine čestice. Ova serija ventilatora sa filterima je pogodna za odsis sa mašina iz drvne industrije. Visoko kvalitetan elektromotor specijalno projektovan za ventilatore, ugrađen na antivibracione gumene nosače; zaštita motora IP55-Klase F. Napajanje 380V-50Hz. Standardno ofarbani u RAL boju. Postoji mogućnost ugradnje u aero kutije. Regulacija brzine inverterom. Suitable for extracting and filtering air containing dust, sawdust, plastic and other fine particle materials. This series of fans is suitable for wood factory machinery. High quality electric motor specially manufactured for fans, mounted on anti-vibration rubber feet; protection IP55-Class F. Input voltage: 380V-50Hz Painted in RAL color as standard. Can be delivered within fan section. Speed regulation by frequency control. MODEL: JT Inlet Flange Outlet Flange Internal () Εxternal () 2800 RPM Impeller () Air flow 3 m /h Total Pressure Pa 2,0 180 145 x 190 195 x 240 310 1.370 1.520 3,0 200 145 x 190 195 x 240 310 1.800 1.820 5,5 230 195 x 230 245 x 280 400 3.600 2.050 7,5 250 195 x 230 245 x 280 400 4.500 2.050 10,0 280 235 x 275 295 x 335 485 5.200 2.540 15,0 300 235 x 275 295 x 335 485 6.500 3.560 20,0 330 330 x 280 390 x 340 585 6.800 5.590 25,0 330 330 x 280 390 x 340 585 7.800 5.590 Cene možete pronaći u cenovniku / Prices are in pricelist J.1. JAKKA - Ventilacija DIMENZIJE Dimensions / DIMESNIONS Inlet Flange Α Β C D 2,0 18 57 55,0 51 22,5 3,0 20 57 55,0 51 21,5 5,5 23 72 64,0 65 29,0 7,5 25 72 64,0 70 28,0 10,0 28 86 80,5 78 33,5 15,0 30 86 80,5 82 32,5 20,0 33 103 98,0 87 41,5 25,0 33 103 98,0 87 40,0 C C B D Α DODATNA OPREMA / ACCESORIES 6
Centrifugalni transportni ventilatori sa jednim usisom / Single Inlet High Pressure Centrifugal Fans 5,5 7,5 3000 2500 2000 1500 1000 500 2000 3000 4000 5000 6000 10 15 20 25 7
Plastični krovni ventilatori / Plastic roof fans MODEL: JPLAST Pogodni su za odsis agresivnih gasova (hemijska industrija, laboratorije, biološka proučavanja, podzemne tunele, itd. U potpunosti su izrađeni od PVC-a. Ventilaciono kolo sa unapred zakrivljenim lopaticama (tipa sirocco). Materijal i dizajn obezbeđuju otpornost na koroziju i varničenje. Visoko kvalitetan elektromotor specijalno projektovan za ventilatore, ugrađen na antivibracione gumene nosače; zaštita motora IP55-Klase F. Napajanje 380V-50Hz. Regulisanje monofaznij modela se vrši reostatom (do 0,5 reostatom REM 5; modeli do 1,5 reostatom REM 10, a modeli do 3 reostatom REM16), kod trofaznih modela regulacija se vrši inverterom. Suitable for oxidant gas suction (chemical industries, laboratories, biological studies, undergrounds, etc. Whollz made of PVC, impeller with forward curved blades (sirocco type) The material and design make the fan corrosion and spark proof. High quality electric motor specially manufactured for fans, mounted on antivibration rubber feet; protection IP55-Class F. Input voltage: 380V-50Hz. Single phase models can be regulated with speed controllers (up to 0,5 with REM 5; up to 1,5 with REM 10, up to 3 with REM 16); three speed models can be frequency controlled. Visoko kvalitetan elektromotor specijalno projektovan za ventilatore. Zaštita motora IP55-Klase F. / High quality electric motor specially manufactured for fans. Protection IP55-Class F Type JPLAST - 25/6 - LP JPLAST - 30/6 - LP JPLAST - 35/6 - LP JPLAST - 40/6 - LP JPLAST - 50/6 - LP JPLAST - 60/6 - LP JPLAST - 70/6 - LP 950 o/min /rpm Inlet flange Air flow m 3 /h Noise level dβ (Α) 0,50 250 1.500 59 1,00 315 2.500 60 2,00 350 4.000 65 4,00 400 7.000 72 4,00 500 9.000 59 7,50-20,00 600 11.000-19.000 61-64 15,00-40,00 700 16.000-32.000 62-72 Type JPLAST - 12/4 - LP JPLAST - 16/4 - LP JPLAST - 20/4 - LP JPLAST - 25/4 - LP JPLAST - 30/4 - LP JPLAST - 35/4 - LP JPLAST - 40/4 - LP JPLAST - 50/4 - LP 1450 o/min /rpm Inlet flange Air flow Noise Level m 3 /h dβ (Α) 3 m /h dβ (Α) 0,25 120 250 56 0,50 160 400 60 0,50 200 1.000 57 1,00 250 2.200 61 1,50 315 4.000 65 4,00 355 6.000 70 7,50 400 10.000 78 15,00 500 13.500 64 2800 o/min /rpm Type JPLAST - 12/2 - LP JPLAST - 16/2 - LP JPLAST - 20/2 - LP JPLAST - 25/2 - LP Inlet flange Air flow Noise Level m 3 /h dβ (Α) 3 m /h dβ (Α) 0,25 120 450 67 1,00 160 800 67 1,50 200 1.600 70 3,00 250 2.500 72 Cene možete pronaći u cenovniku / Prices are in pricelist J.1. JAKKA - Ventilacija 8
Plastični krovni ventilatori / Plastic Roof fans JPLAST 125-200-250 D Α B C K L M D E G F J O H I P Q S R Type A B C D E F G H I J K L M N O P Q R S JPLAST PLAST-12-12 125 284 103 118 125 324.5 189 135.5 175 200 10 293 221 72 90 130 35 130 80 200 JPLAST PLAST-20-20 200 418 148 170 200 501 300 201 215 240 10 420 300 120 160 200 35 170 95 240 JPLAST PLAST-25-25 250 520 185 210 250 570 320 250 255 280 10 486.5 357.5 129 150 250 52.5 175 130 280 D Β Α C K J L M T S D Α Β C K J M L T S Ia N U G E E F Α F Α F N Dimenzije / Dimensions JPLAST 16 JPLAST 315-355-400 N U G H I O P R Q V H I Ia R P Q V Dimenzije / Dimensions Type A B C D E F G H I Ia J K L M N O P Q R S T U V JPLAST - 16 160 349 139.5 157 105 325 148 177 215 240 10 367 282 85 90 200 35 170 80 240 160 120 140 150 JPLAST - 30 315 593 222 251 240 515 215 300 234 260 12 565 380 185 195 310 50 175 155 275 315 170 265 306 JPLAST - 35 335 696 259 297 280 628 275 353 285 380 12 660 450 210 225 320 50 200 170 300 355 210 305 356 JPLAST - 40 400 834.5 310 357 335 724 300 424 315 350 12 810 565 245 270 410 50 250 197 350 400 230 362 421 JPLAST 500-600-700 C Α B N M W D X E O Y F G H I J K L P Q R S T V U Z Dimenzije / Dimensions Type A B C D E F G H I J K L M N O P Q R S T U V W X Y Z JPLAST - 50 500 993 370 400 358 503 20 380 20 60 275 275 60 280 320 470 14 60 360 231 208 20 14 500 230 496 426 JPLAST - 60 600 1191 444 480 426 603 25 450 25 60 335 335 60 325 385 540 14 60 360 270 250 25 14 600 400 586 505 JPLAST - 70 700 1387 518 560 492 701 25 520 25 70 385 385 70 365 450 700 14 70 350 310 285 25 14 700 460 666 570 9
Plastični krovni ventilatori / Plastic Roof fans JPLAST 12 JPLAST 16 JPLAST 20 JPLAST 25 JPLAST 30 10
Centrifugalni plastični ventilatori sa jednim usisom / Single Inlet Plastic Centifugal Fans JPLAST 35 35 JPLAST 40 40 JPLAST 50 50 JPLAST 60 60 JPLAST 70 11
Plastični krovni ventilatori / Plastic Roof fans Pogodni su za izvlačenje agresivnih gasova (hemijska industrija, laboratorije, biološka ispitivanja, podzemni tuneli, itd.). U potpunosti su izrađeni od PVC-a. Ventilaciono kolo sa unapred zakrivljenim lopaticama (tipa sirocco). Visoko kvalitetan elektromotor specijalno projektovan za ventilatore; zaštita motora IP55-Klase F. Napajanje 220V ili 380V-50Hz. Regulisanje monofaznij modela se vrši reostatom, kod trofaznih modela regulacija se vrši inverterom. Suitable for oxidant gas suction (chemical industries, laboratories, biological studies, undergrounds, etc. Wholly made of PVC, impeller with forward curved blades (sirocco type). High quality electric motor specially manufactured for fans; protection IP55-Class F. Input voltage: 380V-50Hz. Single phase models can be regulated with speed controllers; three speed models can be frequency controlled. Type 900 o/min /rpm Noise Level dβ (Α) m 3 /h JPLAST - 25/6 - OP- LP 0,25 250 1.500 15 59 JPLAST - 30/6 - OP- LP 0,50 315 2.500 22 60 1400 o/min /rpm Static Pressure H2O Type Inlet Flange Air flow Static Pressure Noise Level m 3 /h H2O dβ (Α) JPLAST - 12/4 - OP - LP 0,25 125 250 18 56 JPLAST - 20/4 - OP - LP 0,50 200 950 21 57 JPLAST - 25/4 - OP - LP 1,00 250 2.200 33 65 JPLAST - 30/4 - OP - LP 1,50 315 4.000 50 65 Type Inlet Flange Inlet Flange Air flow 2800 o/min /rpm Air flow Static Pressure H2O Noise Level dβ (Α) m 3 /h JPLAST - 12/2 - OP - LP 0,25 125 450 36 67 JPLAST - 20/2 - OP - LP 1,50 200 1.600 100 70 JPLAST - 25/2 - OP - LP 3,00 250 2.200 162 71 Cene možete pronaći u cenovniku / Prices are in pricelist J.1. JAKKA - Ventilacija 12
Centrifugalni plastični Ex ventilatori sa jednim usisom / Single Inlet Plastic Ex Proof Centrifugal Fans Pogodan za ugradnju u transformatorska postrojenja, prostorije sa motorima, sobe sa bojlerima i gasnim postrojenjima, hemijske laboratorije, i na mestima gde postoji mogućnost prisustva zapaljivih i eksplozivnih gasova. Potpuno izrađen od polipropilena, kako bi se izbegla mogućnost varničenja. Neopohodan u svakom postrojenju sa tečnim ili priprodnim gasom. Tip A: EExe II električni motor sa pojačanom bezbednošću, temp.klase T1-T3, odgovara 94/9/CE (ATEX). / Suitable for installation in transformers areas, engine rooms, boiler rooms, natural gas boiler rooms, chemichal laboratories and areas where flamable and explosive gases are present. Completly made of Polypropylene for avoidance of spark creation. Necessary in every natural and liquid gasinstallation. Type A: Increased safety EExe II electric motor, temperature classt1-t3 conforms to 94/9/CE (ATEX). Visoko kvalitetan elektromotor specijalno projektovan za ventilatore u EExe II/T1-T3 izvedbi, tip A, montiran na antivibracione gumene nosače. / High quality electric motor specially manufactured for fans, EExe II/T1-T3 approved, type A, mounted on antivibration rubber feet Type Α Type Α EExe II/T1-T3 Inlet Flange () 1450 RPM Air flow m 3 /h Noise Level dβ (Α) JPLAST - 12/4 - EEx 0,25 125 250 56 JPLAST - 16/4 - EEx 0,50 160 400 60 JPLAST - 20/4 - EEx 0,50 200 1.000 57 JPLAST - 25/4 - EEx 1,00 250 2.200 61 JPLAST - 30/4 - EEx 2,00 315 4.000 65 Type A EExe II/T1-T3 Inlet Flange () 2850 RPM Air flow m 3 /h Noise Level dβ (Α) JPLAST - 12/2 - EEx 0,25 125 450 67 JPLAST - 16/2 - EEx 1,00 160 800 67 Cene možete pronaći u cenovniku / Prices are in pricelist J.1. JAKKA - Ventilacija 13
Gde su ugradjeni naši ventilatori: Nel mondo i nostri prodotti sono installati in: Dans le monde nos produits sont installés en : Our products are installed in: Weltweit sind unsere Produkte in folgenden Ländern installiert: Algeria Australia Austria Belgium Bulgary Czech Republic China Croatia Cyprus Denmark Egypt Estonia France Hungary Korea Jordan Germany Great Britain Greece Indonesia India Iran Ireland Israel Italy Lebanon Lithuania Maroc the Netherlands Nigeria Pakistan Poland Portugal Romania Russian Federation Serbia Slovenia Slovakia Spain Sweden Switzerland Thailand Tunisia Turkey United Arab Emirates the Ukraine