MATHEMATICS FOR ENGINEERING DIFFERENTIATION TUTORIAL 1 - BASIC DIFFERENTIATION



Similar documents
Instantaneous Rate of Change:

Tangent Lines and Rates of Change

2 Limits and Derivatives

f(x) f(a) x a Our intuition tells us that the slope of the tangent line to the curve at the point P is m P Q =

Math 113 HW #5 Solutions

Lecture 10: What is a Function, definition, piecewise defined functions, difference quotient, domain of a function

The Derivative as a Function

UNIT 1: ANALYTICAL METHODS FOR ENGINEERS

Sections 3.1/3.2: Introducing the Derivative/Rules of Differentiation

ACT Math Facts & Formulas

The EOQ Inventory Formula

Derivatives Math 120 Calculus I D Joyce, Fall 2013

ANALYTICAL METHODS FOR ENGINEERS

Average and Instantaneous Rates of Change: The Derivative

SAT Subject Math Level 1 Facts & Formulas

Verifying Numerical Convergence Rates

EDEXCEL NATIONAL CERTIFICATE/DIPLOMA UNIT 5 - ELECTRICAL AND ELECTRONIC PRINCIPLES NQF LEVEL 3 OUTCOME 4 - ALTERNATING CURRENT

In other words the graph of the polynomial should pass through the points

Section 3.3. Differentiation of Polynomials and Rational Functions. Difference Equations to Differential Equations

Displacement (x) Velocity (v) Acceleration (a) x = f(t) differentiate v = dx Acceleration Velocity (v) Displacement x

Oscillations. Vern Lindberg. June 10, 2010

Chapter 7 Numerical Differentiation and Integration

ENGINEERING COUNCIL DYNAMICS OF MECHANICAL SYSTEMS D225 TUTORIAL 1 LINEAR AND ANGULAR DISPLACEMENT, VELOCITY AND ACCELERATION

Applications of Second-Order Differential Equations

Mechanics 1: Conservation of Energy and Momentum

Solutions by: KARATUĞ OZAN BiRCAN. PROBLEM 1 (20 points): Let D be a region, i.e., an open connected set in

Determine the perimeter of a triangle using algebra Find the area of a triangle using the formula

Notes: Most of the material in this chapter is taken from Young and Freedman, Chap. 12.

Physics Notes Class 11 CHAPTER 3 MOTION IN A STRAIGHT LINE

Theoretical calculation of the heat capacity

MATHEMATICS FOR ENGINEERING BASIC ALGEBRA

CHAPTER 8: DIFFERENTIAL CALCULUS

SOLID MECHANICS TUTORIAL MECHANISMS KINEMATICS - VELOCITY AND ACCELERATION DIAGRAMS

19.7. Applications of Differential Equations. Introduction. Prerequisites. Learning Outcomes. Learning Style

F = ma. F = G m 1m 2 R 2

Research on the Anti-perspective Correction Algorithm of QR Barcode

Mechanical Principles

1.6. Analyse Optimum Volume and Surface Area. Maximum Volume for a Given Surface Area. Example 1. Solution

MATHEMATICS FOR ENGINEERING INTEGRATION TUTORIAL 3 - NUMERICAL INTEGRATION METHODS

Mechanical Principles

Math Test Sections. The College Board: Expanding College Opportunity

Math 229 Lecture Notes: Product and Quotient Rules Professor Richard Blecksmith

Projective Geometry. Projective Geometry

Writing Mathematics Papers

Pressure. Pressure. Atmospheric pressure. Conceptual example 1: Blood pressure. Pressure is force per unit area:

AP PHYSICS C Mechanics - SUMMER ASSIGNMENT FOR

Some Comments on the Derivative of a Vector with applications to angular momentum and curvature. E. L. Lady (October 18, 2000)

Mechanics lecture 7 Moment of a force, torque, equilibrium of a body

An inquiry into the multiplier process in IS-LM model

1.3.1 Position, Distance and Displacement

Freely Falling Bodies & Uniformly Accelerated Motion

Chapter 10: Refrigeration Cycles

Spring Simple Harmonic Oscillator. Spring constant. Potential Energy stored in a Spring. Understanding oscillations. Understanding oscillations

To define concepts such as distance, displacement, speed, velocity, and acceleration.

Physics 41 HW Set 1 Chapter 15

f(x + h) f(x) h as representing the slope of a secant line. As h goes to 0, the slope of the secant line approaches the slope of the tangent line.

The modelling of business rules for dashboard reporting using mutual information

SAT Math Facts & Formulas

SOLID MECHANICS BALANCING TUTORIAL BALANCING OF ROTATING BODIES

Chapter 4 One Dimensional Kinematics

13 PERIMETER AND AREA OF 2D SHAPES

Comparison between two approaches to overload control in a Real Server: local or hybrid solutions?

Lecture L2 - Degrees of Freedom and Constraints, Rectilinear Motion

SAT Math Must-Know Facts & Formulas

Catalogue no XIE. Survey Methodology. December 2004

Ground Rules. PC1221 Fundamentals of Physics I. Kinematics. Position. Lectures 3 and 4 Motion in One Dimension. Dr Tay Seng Chuan

M(0) = 1 M(1) = 2 M(h) = M(h 1) + M(h 2) + 1 (h > 1)

SAMPLE DESIGN FOR THE TERRORISM RISK INSURANCE PROGRAM SURVEY

Lecture L22-2D Rigid Body Dynamics: Work and Energy

ES250: Electrical Science. HW7: Energy Storage Elements

FINITE DIFFERENCE METHODS

Can a Lump-Sum Transfer Make Everyone Enjoy the Gains. from Free Trade?

2.1: The Derivative and the Tangent Line Problem

Chapter 11. Limits and an Introduction to Calculus. Selected Applications

Review of Fundamental Mathematics

EC201 Intermediate Macroeconomics. EC201 Intermediate Macroeconomics Problem set 8 Solution

Simple Harmonic Motion

For Sale By Owner Program. We can help with our for sale by owner kit that includes:

SOLID MECHANICS DYNAMICS TUTORIAL PULLEY DRIVE SYSTEMS. This work covers elements of the syllabus for the Edexcel module HNC/D Mechanical Principles.

Physics 231 Lecture 15

Section 2.3 Solving Right Triangle Trigonometry

Trigonometry Hard Problems

Math Placement Test Practice Problems

New Vocabulary volume

Grade 12 Assessment Exemplars

Compute the derivative by definition: The four step procedure

THE NEISS SAMPLE (DESIGN AND IMPLEMENTATION) 1997 to Present. Prepared for public release by:

Physics 1120: Simple Harmonic Motion Solutions

CHAPTER 7. Di erentiation

MATHEMATICS FOR ENGINEERING BASIC ALGEBRA

ε: Voltage output of Signal Generator (also called the Source voltage or Applied

Periodic wave in spatial domain - length scale is wavelength Given symbol l y

Second Order Linear Differential Equations

Perimeter, Area and Volume of Regular Shapes

AP Physics C. Oscillations/SHM Review Packet

Pioneer Fund Story. Searching for Value Today and Tomorrow. Pioneer Funds Equities

Geometric Stratification of Accounting Data

MECHANICS OF SOLIDS - BEAMS TUTORIAL 2 SHEAR FORCE AND BENDING MOMENTS IN BEAMS

Transcription:

MATHEMATICS FOR ENGINEERING DIFFERENTIATION TUTORIAL 1 - BASIC DIFFERENTIATION Tis tutorial is essential pre-requisite material for anyone stuing mecanical engineering. Tis tutorial uses te principle of learning by example. Te approac is practical rater tan purely matematical and may be too simple for tose wo prefer pure mats. Calculus is usually divided up into two parts, integration and differentiation. Eac is te reverse process of te oter. Integration is covered in tutorial 1. On completion of tis tutorial you sould be able to do te following. Explain differential coefficients. Apply Newton s rules of differentiation to basic functions. Solve basic engineering problems involving differentiation. Define iger differential coefficients. Evaluate iger order differential coefficient. D.J.Dunn www.freestu.co.uk 1

1. DIFFERENTIAL COEFFICIENTS DIFFERENTIATION Differentiation is te reverse process of integration but we will start tis section by first defining a differential coefficient. Remember tat te symbol means a finite cange in someting. Here are some examples. Temperature cange T = T T 1 Cange in time t = t t 1 Cange in Angle = 1 Cange in distance x = x x 1 Cange in velocity v = v v 1 Te symbol means a small but finite cange in someting suc as T, t,, x, v and so on. Consider te following. Te distance moved by an object is directly proportional to time t as sown on te grap. Figure 1 Velocity = Cange in distance/cange in time. v = x/ t Tis would be te same for a small cange. v = x/ t = x/ t Te ratio x/ t is te same as te ratio x/ t and te ratio is te gradient of te straigt line. INFINITESIMALLY SMALL CHANGES d Te symbol d is used to denote a cange tat is infinitesimally small. On our grap te ratios are all te same and equal to te velocity. Tis value is te same at any point on a straigtline grap. v = / = x/ t = x/ t. Tis ratio olds true even wen te canges approac zero. D.J.Dunn www.freestu.co.uk

Now consider te case wen acceleration occurs and te velocity is canging. Te grap of x against t is an upwards curve. Figure We can no longer say v = x/ t but v = x/ t migt give a reasonable approximation if it is possible to measure te small canges. Te result of evaluating v = x/ t would give te velocity at te time te measurements were made. At some oter time te value would be different. If we were able to take our measurements over smaller and smaller intervals, te velocity would become te instantaneous velocity. Wen te value of t tends to zero we would write t 0. We would say tat in te limit, as t 0, te ratio x/ t becomes te differential coefficient (te true ratio) and we write it as /. It sould be obvious now tat te differential coefficient is te rate of cange of one variable wit anoter and is also te gradient of te grap at a given point. v = / gives te precise velocity at an instant in time but of course we could not find it by measuring and. Newton s calculus metod allows us to find tese differential coefficients if we ave a matematical equation linking te two variables. Wen a bo accelerates at a m/s te formula relating distance and time is x = a t /. Te velocity is te ratio / and it may be found at any moment in time by applying Newton s rules for differentiation. Remember Differentiation gives te gradient of te function. D.J.Dunn www.freestu.co.uk

. NEWTON S METHOD.1 DIFFERENTIATION OF AN ALGEBRAIC EXPRESSION Te equation x = a t / is an example of an algebraic equation. In general we use x and y and a general equation may be written as y = Cx n were C is a constant and n is a power or index. Te rule for differentiating is : / = Cnx (n-1) or = Cnx (n-1) Note tat integrating returns te equation back to its original form. DERIVATION For tose wo want to know were tis comes from ere is te derivation. Consider to points A and B on a curve of y = Cx n Join AB wit a straigt line and te gradient of te line is approximately te gradient at point P. Te closer A and B are te more accurate tis becomes. Gradient at P BC/AC is te difference between te value of x at B and A. Gradient f x B f x A = lim f(x A + ) f(x) A 0 = lim 0 Cx n 1 + x If we expand 1 + x n Cx n f(x) B f(x) A = lim 0 C(x + ) n Cx n = lim 0 Cx n 1 + x = lim 0 n we get a series 1 + n x + a x n 1 + b x + c x 4.. = lim 0 Cx n 1 + n x + a x + b x + c x 4.. 1 = lim 0 Cx n n x + a x + b x + c x 4.. divide out te = lim n 0 Cxn x + a + b x x + Put = 0 and = Cnxn 1 D.J.Dunn www.freestu.co.uk 4

. DIFFERENTIATING A CONSTANT. Consider te equation y = a x n. Wen n = 0 tis becomes y = a x 0 = a (te constant). (Remember tat anyting to te power of zero is unity). Using te rule for differentiation / = anx 0-1 = a (0)x -1 = 0 Te constant disappears wen integrated. Tis explains wy, wen you do integration witout limits, you must add on a constant tat migt or migt not ave been present before you differentiated. It is important to remember tat: A constant disappears wen differentiated. WORKED EXAMPLE No.1 Differentiate te function x = t / wit respect to t and evaluate it wen t = 4. t x ()()t 1 t Putting t we find 6 WORKED EXAMPLE No. Differentiate te function y = 4 + x wit respect to y and evaluate it wen y = 5. y 4 x 1 0 x x Putting y 5 we find 10 D.J.Dunn www.freestu.co.uk 5

WORKED EXAMPLE No. Differentiate te function z = y 4 wit respect to y and evaluate it wen y =. z y dz 4 ()(4)x 4 1 8y Putting y we find dz 64 WORKED EXAMPLE No.4 Differentiate te function p = q + q 5 +5 wit respect to q and evaluate it wen q =. p q q dp ()()q dq 5 1 puttingq we get 5 (5)()q 5 1 0 6q 15q dp 4 40 64 dq 4 WORKED EXAMPLE No.5 Te equation linking distance and time is x = 4t + ½ at were a is te acceleration. Find te velocity at time t = 4 seconds given a = 1.5 m/s. x = 4t + ½ at velocity = v = / = 4 + at = 4 +(1.5)(4) = 10 m/s D.J.Dunn www.freestu.co.uk 6

SELF ASSESSMENT EXERCISE No.1 1. Find te gradient of te function y = x - 5x 7 wen x = (Answer -8). Find te gradient of te function p = q + q + 4q and evaluate wen q = (Answer 58). Find te gradient of te function u = v + 4v 4 and evaluate wen v = 5 (Answer 00) SELF ASSESSMENT EXERCISE No. 1. Te electric carge entering a capacitor is related to time by te equation q = t. Determine te current (i = dq/) after 5 seconds. (0 Amp). Te angle radians turned by a weel after t seconds from te start of measurement is found to be related to time by te equation = 1 t + ½ t 1 is te initial angular velocity ( rad/s) and is te angular acceleration (0.5 rad/s ). Determine te angular velocity ( = d /) 8 seconds from te start. (6 rad/s) D.J.Dunn www.freestu.co.uk 7

. OTHER STANDARD FUNCTIONS For oter common functions te differential coefficients may be found from te look up table below. y sin(ax) y cos(ax) y tan(ax) y ln(ax) y ae kx acos(ax) asin(ax) a atan(ax) 1 1 x x kx ake WORKED EXAMPLE No.6 Te distance moved by a mass oscillating on a spring is given by te equation: x = 5 cos (8 t) mm. Find te distance and velocity after 0.1 seconds. At 0.1 seconds x = 5 cos (0.8) =.48 mm v = / = -40 sin (8t) = -40 sin (0.8) = -8.69 mm/s Note tat your calculator must be in radian mode wen looking up sine and cosine values. WORKED EXAMPLE No.7 Te distance moved by a mass is related to time by te equation : x = 0e 0.5t mm. Find te distance and velocity after 0. seconds. At 0. seconds x = 0e 0.5t = 0e 0.1 =.1 mm v = / = (0)(0.5) e 0.5t = 10 e 0.1 = 11.05 mm/s D.J.Dunn www.freestu.co.uk 8

SELF ASSESSMENT EXERCISE No. 1. If te current flowing in a circuit is related to time by te formula i = 4sin(t), find te rate of cange of current after 0. seconds. (9.9 A/s). Te voltage across a capacitor C wen it is being discarged troug a resistance R is related to time by te equation v = 4e -t/t were T = is a time constant and T = RC. Find te voltage and rate of cange of voltage after 0. seconds given R = 10 k and C = 0 F. (1.47 V and -7.6 V/s ). Te voltage across a capacitor C wen it is being carged troug a resistance R is related to time by te equation v = 4-4e -t/t were T = is a time constant and T = RC. Find te voltage and rate of cange of voltage after 0. seconds given R = 10 k and C = 0 F. (.58 V and 7.6 V/s ) 4. Te distance moved by a mass is related to time by te equation : x = 17e 0.t mm. Find te distance and velocity after 0.4 seconds. (19.17 mm and 5.75 mm/s) 5. Te angle turned by a simple pendulum is given by te equation: = 0.05 sin (6 t) mm. Find te angle and angular velocity (d /) after 0. seconds. (0.0466 radian and 0.1087 rad/s) D.J.Dunn www.freestu.co.uk 9

. HIGHER ORDER DIFFERENTIALS Consider te function y = x. Te grap looks like tis. Figure Te gradient of te grap at any point is / =x. Tis may be evaluated for any value of x. If we plot / against x we get te following grap. Figure 4 Tis grap is also a curve. We may differentiate again to find te gradient at any point. Tis is te gradient of te gradient. We write it as follows. d d y 6x Te grap is a straigt line as sown wit a gradient of 6 at all points. If we differentiate again we get Figure 5 d y d d y 6 D.J.Dunn www.freestu.co.uk 10

WORKED EXAMPLE No.8 Te distance moved by a bo (in metres) wit uniform acceleration is given by s = 5t. Find te distance moved, velocity and acceleration after 1 seconds. distance s 5t 70 m ds velocity v 10t 10 m/s dv d s acceleration 10 m/s WORKED EXAMPLE No.9 Te distance moved by an oscillating bo is related to time by te function: x = 1. sin(t) mm. Find te distance moved, velocity and acceleration after 0. seconds. distance x 1.sin(t) 1.sin (0.6) (1.)(.5646) 0.678 mm velocity v ()(1.)cos(t) (.4)cos(0.6) 1.981 mm/s dv d x acceleration ()()(1.)sin(t) - 4.8sin(0.6) -.71mm/s D.J.Dunn www.freestu.co.uk 11

SELF ASSESSMENT EXERCISE No.4 1. Evaluate te first and second derivative of te function p = 8e -0.t wen t =. (Answers -1.07 and 0.15). Te motion of a mecanism is described by te equation x = 50 Cos(0.5t) mm. Calculate te distance, velocity and acceleration after 0. seconds. (Answers 49.44 mm, -.74 mm/s and -1.6 mm/s ). Evaluate te first and second derivatives of te function z = x 4 + x + x - 5 wen x = 4 (Answers 658 and 456) 4. Te motion of a bo is described te equation x = Asin( t) were x is te distance moved and t is te variable time. Sow by successive differentiation and a substitution tat te acceleration is given by a = - x. D.J.Dunn www.freestu.co.uk 1