Industrial Plugs and Sockets. RCD Protected Combination Units BS EN.60309-2/BS4343:1992. including

Industrial Plugs and Sockets BS EN.030-2/BS33:12 including RCD Protected Combination Units

Industrial Plugs & Sockets for harsh conditions & environments Chemical & Heavy Industry Building & Construction Industry Military Applications R1 R2 S3 S R1 R2 F11 F12 S3 S R1 R2 F2 F3 F17 S1 R3 R3 F13 R3 F7 S2 R R F1 R F10 S3 R5 F2 F15 R5 F13 S S1 F3 S1 R F15 S2 F S2 F1 F1 Harbour Installation, Containers, Ship Yards & Shipping Lines Food Processing & Packaging Industrial & Commercial Properties R R5 R F1 F2 F3 F F5 S1 S2 S3 S R2 R3 R F F1 F17 S1 S2 S3 R2 R3 R F2 F F8 F10 S1 S2 S3 S Mining & Tunnelling Agriculture & Farming Power Generation & Distribution R F F2 R1 F2 F12 R5 F10 F3 R2 F3 F13 R S1 F R3 F F1 F2 S2 F13 R F7 F17 F3 S3 F1 R5 F8 S1 F S S1 R F S2 F8 S3 F1 F10 S3 Camping & Caravanning Oil & Gas (Non Hazardous Areas) Film, TV & Outdoor Events R2 R R F2 F F7 F13 F1 F17 S1 S3 R1 R2 R3 R R5 R F1 F2 F3 F7 F F10 F12 F13 F1 S1 S2 S3 S R1 R2 R3 R R5 R F1 F2 F F7 F F13 F1 F17 S1 S2 S3 S

Contents With Resistance to Introduction & features R1 R2 R3 R R5 R Light acids Oil Grease Solvents Aggressive gases & vapours Resistant against seawater Screw Terminal Connections & product features Quick-Connect - The new generation Multi-Grip - Positive cable clamping 8 Production, quality assurance and approvals 10 Method of connection & selection etc 1 Product information Standard Features F1 F2 F3 F F5 F F7 F8 F F10 F11 F12 F13 F1 F15 F1 F17 High mechanical strength Nickel-plated contacts High temperature resistant contact carrier Modular set-up Components can be changed seperately Box terminals Special design ensures a good grip Cable entry big enough for rubber insulated cable Protected against corrosion Flame retardant Kontex-Plus & box terminals (for 3 & 125A) Breaking capacity test (3A at 0V) All outside metal parts are made of stainless steel Reinforced fixing of hinged cover, movable above 180º Special thread of cable gland ensures high torque Socket-outlets & connectors (couplers) in IP, IP55 & IP7 available Transparent operating window with Klick-Fast facility Special Features S1 S2 S3 S Screw terminal Combination units Metal high current s 1 Switched Interlocked Sockets 31 Plugs & Appliance Inlets 37 Connectors (couplers) 53 Quick-Connect 1 Low Voltage 75 Refrigerated (reefer) Container Plugs & Sockets 83 Special Purpose Products 8 500V black/green high frequency 2 Direct current plugs & sockets 3 7 Pole (P + E) plugs & sockets Phase Inverters Schuko Plugs & Sockets 105 Combination Units 10 Pre-wired units (1, & 3A) 11 Multi-outlet units 117 Switch interlocked units (1, 3A) 118 Pre-wired units (125A) 120 Switch interlocked units (125A) 121 Single & multi outlet socket units 122 Heavy duty rubber in-line units 125 Multi-outlet distribution units 12 Earth monitoring units 127 Made to order units 128 Specialist Applications & Accessories 131 Caravan hook-up units & accessories 1 Garage utility units & shower units 135 Film - TV & events distribution equipment 13 Enclosure windows 138 Military Applications 13 Product Code Index 11

Screw-terminal Connections 3A & 125A The CEE Norm U.K. range of industrial plugs & sockets is one of the most technically advanced & comprehensive range available which conforms to BS EN. 030-2/BS33:12 & IEC 30-1/2. The use of high quality materials in their manufacture gives the CEE Norm U.K. range such advantages as: High impact strength Resistance to sudden changes in temperature Resistance to wear High insulation resistance Generally good resistance to most chemicals Backed by more than 5 years of manufacturing experience, the products have developed into a quality user friendly range. CEE Norm U.K. also manufacture a full range of RCD/MCB combination units & multi-outlet distribution units. The majority of items in this catalogue are available ex-stock or on fast delivery. Please do not hesitate to contact our sales office for further details. 0152 212 700 QUICK-CONNECT range see pages -7 Multi-Grip products see pages 8- All pins, sleeves, screws, contact springs and terminals are either nickel plated or manufactured from rustproof materials to ensure corrosion resistance. Metric Thread M5 for 3A M8 for 125A Ensures a firm contact pressure Open Contact Sleeve Dust and dirt will not remain in the sleeve thus reducing the potential of contact heating Special Design Ensures self-cleaning effect of the contact area for sleeve and pin One Piece Contact Pin Ensuring excellent condictivity Clamp Terminals No cable ferrules necessary, large contact surface for excellent conductivity One Piece Contact Sleeve Ensuring excellent conductivity Nickel-Plated Contacts Excellent nickel plating quality because of the special design of the sleeve (sleeve is open, nickel has the same thickness inside and outside) Clip Ring made of Stainless Steel Ensures a stable contact pressure with optimal insertion and removal forces Special Design In case of arcing no damage on the contact area Designed For Safety & Reliability In Use

Typical quality features Socket outlet with through wiring facilities Large connection area Cable entries at top and bottom Contact carrier can be pushed in base of enclosure rotating by180 One piece body with Multi-Grip cable gland Screw terminals 1A - A plugs and connectors IP Temperature resistant contact carrier cable entry up to 3.5mm for 3A, up to 50mm for 125A Nickel-plated clamp terminals for 3 and 125A Takes large cable diameters No need for cable ferrules Defined contact pressure Excellent conductivity All SCHUKO-type plugs and sockets are available in splashproof as well as watertight versions Ergonomic design ensures a good grip and easy handling New interlocking mechanism Compact design Top and bottom cable entry High quality switch mounted on DIN-rail 3A and 125A with Kontex-Plus and clamp terminals No maintenance of the interlocking mechanism necessary IP and IP7 Hinged cover opens from front and reduces potential for accumulation of dust and moisture inside cover Large connection area enables wiring with up to 70mm² conductors Neutral and earth contacts are already pre-wired Surface Mounting and Panel Mounting Sockets Safe, Solid, Time-Saving 5

50% SAVINGS on assembly times the new generation with cage clamp terminals Cage Clamp Terminals Easy and quick to handle Terminals in the open position on delivery Push down the appropriate contact slide to lock the conductor into the terminal To re-open, use a screwdriver blade to lift the contact slide Screwless Cage Clamp Terminals Special contact technique -point (quarter turn) locking system to close the 2 piece enclosure without screws Moulded cable sleeve or Multi-Grip cable gland Halogen, cadmium, silicon and PVC free plastics Screwless cage clamp terminals Maintenance free after installation Shock and vibration resistant Push-type terminals without the need of cable ferrules for the conductor or the use of crimping tools KONTEX-PLUS-Contact: Approved breaking capacity Self-cleaning Corrosion free spring Low and stable removal and withdrawal forces Positive conductivity Higher percentage of copper guarantees better conductivity and low temperature rise Colour-coded push-type terminal Stainless steel spring Screwless terminal open Screwless terminal closed The push-type terminal is supplied with the cage clamp in the open position. These cage clamps have proved their reliability millions of times and are maintenance-free. The cage clamp is closed through a special contact slide and can be opened easily by lifting the slide with the help of a screwdriver.

the better alternative to screw type terminals 1A & A Simply open Cage clamp terminals The cage clamp terminals are open on delivery so that the stripped conductor with or without cable end ferrules can immediately be inserted. The terminals accept conductors from 1 up to mm for 1A and 2,5 up to 10 mm for A products. They have proven their reliability millions of times since they have been introduced. Simply insert Conductors The cage clamp terminals accept the same conductor size or type of cable as the relevant screw type terminals. Solid or stranded wires with or without cable end ferrules can easily be inserted. Simply click Push slide The inserted conductor is locked damage free and with optimal contact by simple fingertip pressure onto the terminal. The push slide is colour coded for ease of wiring and can be reopened by simply pulling it back with a normal blade screw driver. Simply quick Wiring The unique, time and labour saving quick connect products are patented world wide. They are approved completely fulfilling all the requirements of IEC 30 regulations. With this fine connection technique the wiring of a CEE-product is really easy and guarantees good wiring quality even under difficult conditions. Examples of the most popular conductors: Stranded Solid Stranded with ferule crimped on airtight 7

Multi-Grip features from 1A to 125A Quicker, better, more reliable Simply safe Special screw fitting The special threaded fitting is secured with a saw tooth thread, which prevents self-induced and unintentional loosening, while plugging and unplugging the connector. The working surface of the threaded fitting is amply dimensioned for commercially available spanners. Simply dry Drainage opening Water will no longer remain in the flared opening; instead it is removed through the drainage holes. Water is absolutely prevented from entering the inner connection space, even when the cable is moved. Simply secure Lamella effect 18 flexible fins adapt themselves to the thinnest or thickest cable diameters, when the threaded fitting is tightened. They guarantee optimal strain relief, while at the same time protecting the cable. The tensile strength exceeds by far the values required by the standards IEC 030, EN 030 and VDE 023. Simple to close Rubber seal When firmly fastened, permanent rubber seal enables the connection to be simplified. In the event of a proper installation, class IP7 protection will be achieved. 8

Multi-Grip Multi-Grip adapts effortlessly to cable diameters! Multi-Grip a better answer to old style cable glands The following cable diameters can be inserted, without affecting the cosure or capacity for strain relief. Connector 1A 3 - pins 1A 5 pins A 3 - pins A 5 pins 3A 3-5 pins 125A 3-5 pins Cable diameter (mm) 8-18 10-21 11-23.5 13-27 1-3 2-50 Further valuable time saved in making connections Time saving with: A 5 pin: = 52% 3A 5 pin: = 2% Rubber reducing rings and internal strain relief systems are no longer needed. Increased internal wiring space. Easier and faster wiring becomes possible. Flared opening Fins Firm rubber spray-seal Drainage opening Special threaded fitting Saw tooth thread NO LONGER NEEDED Spacious connection cavity Cage clamp connecting terminals for 1A and A Frame terminals for 3A and 125A

Developmant and Construction The many and varied demands on specification and function of electrical connectors, which are made for the world-wide market, are continuously analysed and transformed into new types of products within the shortest period of time. The design department has the most modern hardware and software at its disposal Form follows function is the maxim of our designers and engineers whose experience and expertise benefits customers. This approach led to the slogan Quality that convinces!, which includes being safe, robust, and installation friendly as primary characteristics. Production and assembly facilities at the factories in Germany and Telford Machine tool islands that are planned down to the smallest detail permit a quick and flexible assembly of both series and special orders Excellently trained tool makers, using CNC controlled machine tools, quickly realize the ideas that are presented by engineers and designers 10

Production The wishes of the customer are the focus of all our activities. Speed is imperative, and various teams in the production departments are specially trained to meet these demands. Continuing and advanced training of the personnel, in combination with our flexible range of automated machines, assures that even production peaks remain manageable. Fully automated manufacturing cells for brass contacts increase both the quality and quantity of the manufactured output All plastic parts are manufactured with the most modern plastic injection moulding machines, which deliver constant quality Well-trained and highly skilled specialists guarantee observance of the required safety guidelines, during the assembly and wiring of outlet modules 11

Testing and Quality Assurance Our products are subjected to endurance tests, which are designed to exceed the harshest reality. All our parts are tested with glowing heat and freezing cold, extreme humidity and water, together with the finest dust and the roughest dirt. The most modern measuring and testing equipment is used to maintain our high standard of quality Only materials of the best quality, such as rust free contact springs, nickelplated brass clamps or glass-fibre reinforced contact carriers are used on our products. Products are not released from our factories until all these tests have been passed. All our connector devices are tested, to make sure that they are watertight and dustproof to meet the relevant IP rating 12

Only plastics that pass the heating wire test are released for use in our products Continuous testing of all the production steps, in accordance with the strictest testing plans, guarantee quality. The result of these measures is a continuous improvement in quality, at all levels of our company. The national and international certificates of leading test institutes are a visible substantiation of the success of this policy Testing Certificates All injection moulded parts are subjected to tensile strength and pressure tests Approvals In order to promote mutual recognition of test certificates for the acquisition of national test marks, and to reduce the workload in the various testing agencies, an approval procedure for obtaining a CCA certificate has been created through the CENELEC certification agreement. Thus after positive completion of testing through the national testing agency, an application can be made for a CCA certificate, which leads to direct approval in the CENELEC member countries. Within the area in which the EC low voltage directives apply, it is not permitted to demand test marks. Above all when the recognised mark of an individual country has been attained, the product in question has a claim to free movement of goods in all EC countries. 13

Sequence of Connection SUPPLY PLUG SURFACE MOUNTING SOCKET OUTLET PLUG CONNECTOR Abbreviations used in this Catalogue CONNECTOR APPLIANCE INLET Current... Voltage... Frequency... Alternating Current... Direct Current... IP... IP7... Poles... Earth... Neutral... Pilot Pins... Greater Than... Up To or Less Than... CEE Norm U.K. offers a proven range from the simplest 1A V 2P+E plug to multi-outlet socket units with a variety of protection. If you cannot find your exact requirements in this catalogue, please do not hesitate to contact our sales department for guidance. Tel: 0152 212 700 Continuous Innovation such as the QUICK-CONNECT system for 1A and A plugs and sockets which has screwless terminal connections saving installation time. The plug and connector bodies are securely closed without the use of screws and opened with one twist of a screwdriver. The design complies with EN030/1+2 and are certified and permitted to carry the VDE test mark. NEW! 3A 15V P and 5P surface sockets, plugs and connectors now available in All diagrams/dimensions are approximate and products and/or details may be amended at any time without notice 1

The Cee Norm Range: Safety, Quality, User Friendly Comprehensive Competitive Available Safety Standards The need for a common international standard for industrial plugs and sockets has long been obvious not only from the point of view of safety but also for compatibility between manufacturers. The U.K. standard BS33 (published 18) for industrial plugs and sockets was based on the European and International standards CEE 17 and IEC 30. The advantages of the BS33 system soon established it as the safest and most reliable for industrial plugs and sockets in all areas of industry. However, harmonisation of standards with the European Community members has led to CENELEC (The European Committee for Electrotechnical Standardisation) developing a unified standard for industrial plugs and sockets EN030-1 and 2. This has led to a revision of the U.K. standard BS EN030-21BS33:12. The CEE Norm U.K. range fully conforms to all the aforementioned standards and is therefore also compatible with other manufacturer s equipment to the same standards. CE Marking All products comply with the CE Marking directive where applicable. IP (Ingress Protection) Ratings The CEE Norm U.K. range offers a choice of IP (splashproof) or IP7 (watertight) for most products. The exceptions are:- All 125A products are IP7. All Extra Low Voltage (50V or less) products are available at IP only. The table below is a general guide only to the meaning of the IP numbers. In all cases correct installation and connection is assumed. First Numeral (a) Protection of persons against contact with live or moving parts inside enclosure. (b) Protection of equipment against ingress of solid bodies. Second Numeral Protection of equipment against ingress of liquid. Number/ Symbol Degree of Protection Number/ Symbol Degree of Protection (a) Protection against contact by tools, wires or the like, more than 1.0mm thick. (b) Protection against ingress of small foreign bodies. Splash Proof:- Liquid splashed from any direction shall have no harmful effect. 5 (a) Complete protection against contact. (b) Dust Proof:- Protection against harmful deposits of dust, dust may enter but not in amounts sufficient to interfere with satisfactory operation. 5 (a) Complete protection against contact. (b) Dust Tight:- Protection against ingress of dust. 7 Jet Proof:- Water projected by a nozzle from any direction (under stated conditions) shall have no harmful effect. Protection Against Immersion in Water:- It shall not be possible for water to enter the enclosure under stated conditions of pressure and time. 15

Colour Coding All CEE Norm products are colour coded in compliance with BS EN. 030-2/BS33:12 and IEC30 (see table below) for ease of identification of the various voltages and frequencies. Voltage or Frequency 20-25V (2V) 0-50V (2V) 100-130V (V) 200-250V (20V) 380-80V (15V) 500-0V (500V) 0-500Hz Colour Code Violet White Yellow Blue Red Black Green Note: We have used the trade standard voltages of 2V, 2V, V, 20V, 15V and 500V on the part number pages in this catalogue. The actual voltage range for each type is as per British standards and international regulations. For convenience, the 15V (red) appliance has been shown throughout this catalogue for most products. Other voltages / frequencies are also available (where indicated) in the appropriate colours indicated alongside. Earth Clock Position To prevent the possibility of connecting items of different voltages or frequencies with one another by mistake, the earth tube (or pin) position is designated in accordance with the voltage or frequencies in such a way to make this impossible. The earth (or H) position is determined by looking into a socket from the front, with the keyway at the bottom o clock (H) position. The various earth clock positions are as per the diagram on the next page. Note: It follows that on products with pins i.e. plugs and appliance inlets, the earth pin is reversed so that it fits into the correct earth tube position socket. For extra low voltage products, the position is that of the minor keyway in relation to that of major keyway at the o clock position of the socket. Again on products with pins, the position of the minor keyway appears reversed to allow it to slot into the socket. >50V Viewed from front of Socket <50V * Pilot is only fitted on 3A and 125A items 1

Earth Clock Position on over 50V Equipment Minor keyway position in relation to the major keyway (at H) on extra low voltage (less than 50V) equipment (looking at socket) Number of Poles Frequency Hz Voltage Minor Keyway Position 2 or 3 50/0 20-25 None 2 or 3 50/0 0-50 12h 2 or 3 100-200 0-50 h 2 or 3 300 20-25 0-50 2h 2 or 3 00 20-25 0-50 3h 2 or 3 > 00-500 20-25 0-50 11h 2 or 3 Direct Current < 50 10h 17

Notes: 18

Chemical and Heavy Industry Harbour installation containers, ship yards and shipping lines s Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Surface Mounting s page 22 Panel Mounting s page 2 Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 1

Surface and Panel Mounting s Heat-resistant contact carrier Screw/clamp terminals for 3A and 125A Problem-free wiring, even in the case of connection from below Lower housing part can be rotated around 180º Easily accessible connecting terminals QUICK-CONNECT cage clamp tension spring technology for 1A and A or normal screw terminals Brass-nickel-plated clamp terminals for 3A and 125A Accommodation of large lead cross-sections Even contact pressure with minimised transition resistance KONTEX-PLUS, new contact sleeve, protected by utility model Outstanding contact rating results (1A, A, 3A/0V) Self-cleaning Defined contact operation Almost unchanging with drawing forces Excellent heat dissipation Good current flow through high copper content Contact spring of non-corroding material Safe, Robust, Easy to Install 20

This Section Refers to Screw Terminal Products Only 1A and A sockets are available with either screw terminals or terminals. 3A and 125A sockets are available with screw / clamp terminals. 3A 15V pin and 5 pin surface sockets are now also available with terminals. Refer to Pages 3-73 for Offering Time Saving Installation and Assembly 21

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS s 1 3 20 15 20 15 20 15 11302 1130 112 11310 11312 1115 7 113 11 1130 111 1117 1131 1125 112 1127 1 1111 11308 1122 1123 1131 112 1130 112 Surface Mounting Top & Bottom Cable Entry 1A = M20 A = M25 3A = M0 Top / M Bottom 1A and A with screw terminals 3A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin 1 3 20 15 20 15 20 15 11303 11305 113 11311 11313 11 115 1157 1158 1135 113 11307 117 118 11315 115 111 111 112 1130 1153 115 11317 113 11 1112 Surface Mounting Top & Bottom Cable Entry 1A = M20 A = M25 3A = M0 Top / M Bottom 1A and A with screw terminals 3A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin 22 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 a 75 75 b 87 100 100 c 117 12 131 d 103 108 11 e 51 5 5 f - 11 11 h.1 5.1 5.1 i.5.5.5 k 0 - - Conductor mm 2 min 1.5 1.5 1.5 Conductor mm 2 max Surface Mounting Cable entry one at top (open), one at bottom and on the back (closed) base of enclosure can rotate by 180 Amperes Poles 3 5 a 83 83 83 b 12 12 12 c 155 155 155 d 130 130 13 e 8 8 8 f 11 11 11 ø h 5.5 5.5 5.5 i.5.5.5 ø k 12 12 12 l 5 5 5 m 80 80 80 ø n 10 10 10 Conductor mm² min 2.5 2.5 2.5 Conductor mm² max 10 10 10 Surface Mounting Cable entry one at top (open), two at bottom and one on the back (closed) base of enclosure can rotate 180 drill holes prestamped in the base of the enclosure Amperes 3 Poles 3 5 a 118 118 118 b 170 170 170 c 223 223 223 d 18 18 18 e 10 10 10 f 13 13 13 ø h.1.1.1 i Conductor mm² min Conductor mm² max 25 25 25 Surface Mounting Temperature resistant contact carrier, cable entry one at top (open) and two at bottom (closed) Amperes 1 Poles 3 5 3 5 a 75 75 83 83 83 b 87 100 100 12 12 12 c 115 130 130 10 10 10 d 103 115 12 12 135 e 51 5 5 8 8 8 f 20 11 11 11 11 11 g 20 - - - - - ø h.1 5.1 5.1 5.5 5.5 5.5 i.5.5.5.5.5.5 ø k 8 10 10 12 12 12 l - - - 5 5 5 m - - - 80 80 80 ø n - - - 10 10 10 o M20 M20 M20 M25 M25 M25 p M20 M20 M20 2xM25 2xM25 2xM25 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Surface Mounting Cable entry one at top (open), one at bottom at 1 Amp and two at Amp (Closed) Amperes 3 Poles 3 5 a 118 118 118 b 170 170 170 c 228 228 228 d 17 17 17 e 10 10 10 f 13 13 13 ø h.1.1.1 i Conductor mm² min Conductor mm² max 25 25 25 Surface Mounting Temperature resistant contact carrier cable entry one at top (open) and two at bottom (closed) 23

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS s 125 113 20 1137 15 1138 113 111 115 11 117 125A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Surface Mounting Top M50 Cable Entry 125 20 15 117 1177 117 125A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Surface Mounting Top M0 Cable Entry Bottom 1x M0/M50 1 20 1183 15 118 15 1 1A and A with screw terminals Surface Mounting 1 20 13105 15 15 1A and A with screw terminals 13108 131 Panel Mounting Suitable for commercial / laboratory type applications 2 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 125 Poles 3 5 a 10 10 10 b 20 20 20 c 330 330 330 d 18 18 18 e 10 10 10 f 20 20 20 ø h 8.3 8.3 8.3 i 10 10 10 Conductor mm² min 25 25 25 Conductor mm² max 70 70 70 Surface Mounting Temperature resistant contact-carrier M50 top cable entry Amperes 125 Poles 3 5 a 180 180 180 b 0 0 0 c 10 10 10 d 0 0 0 e 208 208 208 f 510 510 510 ø g 8.3 8.3 8.3 h.5.5.5 i M0 M0 M0 k M0/50 M0/50 M0/50 Conductor mm² min 25 25 25 Conductor mm² max 70 70 70 Surface Mounting Temperature resistant contact-carrier M0 top and 1x M0/M50 bottom cable entries Amperes 1 Poles 3 5 5 a 1 1 0 b 7.5 7.5 3 c 100 100 112.5 ø d 5.5 5.5 5.5 e 73 73 - f 7 7 g - - 58 ø h - - 73 i - - 1.5 ø k 20max 20max 8/20 Surface Mounting Straight plug-in direction cable entry one at top (open) and one at bottom (closed) Amperes 1 Poles 3 5 5 a 1 1 0 b 53 53 0 c 15.2 15.2 - d 2.7 2.7 - e 33 33 31 f 31 31 3.5 ø h 7.5 7.5 - ø i.8.8.1 k - 3 2.5 l 5 75 r - 10 10 Surface Mounting Straight plug-in direction suitable for cable ducts and energy columns 1 Amp version with intermediate flange for cable duct socket with -point drill holes fastening 25

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS s 1 20 15 20 15 121 1217 1218 1228 122 1230 121 1220 1221 1231 12 1233 1225 122 1227 1237 1238 123 Panel Mounting 20 Angle 3 1213 20 12135 15 1213 12137 1207 1201 12138 1208 1202 Panel Mounting 15 Angle 1 130 20 131 15 1 13015 1301 13017 Panel Mounting Straight 1 20 15 1310 1311 1312 1313 131 1315 Note: 1310 & 1311 are the popular versions 131 10 11 Panel Mounting Straight 1 20 15 20 15 13000 13001 13002 1300 13007 13008 12 13 1 1300 13010 13011 13003 1300 13005 1331 13 1333 Panel Mounting Straight Flange 75 x 75 mm 3 130 20 1307 15 1308 130 130 13 1310 1305 13 1A and A with screw terminals 3A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Panel Mounting Straight 2 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 a 7 100 100 100 100 100 b 2 2 2 2 2 2 c 0 85 85 85 85 85 d 52 77 77 77 77 77 e 5.5 5.5 5.5 5.5 5.5 5.5 f 8 8 8 8 8 8 h 30 30 2 50 50 50 i 8 50 55 2 2 2 k 57 5 70 75 75 78 l 52 5 70 75 75 78 a 20 20 20 20 20 20 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Amperes 3 Poles 3 5 a 11 11 11 b 11 11 11 c 0 0 0 d 0 0 0 e.5.5.5 f 12 12 12 h 5 5 5 i 7.5 7.5 7.5 l 2 2 2 Conductor mm² min Conductor mm² max 25 25 25 Amperes 1 Poles 3 a 5 0 b 5 0 c 50-52 d 50-52 e. 5.5 f 7 7 h 17 2 i 51 53 k 70 80 l 5 5 m 13 Conductor mm² min 1.5 1.5 Conductor mm² max Amperes 1 Poles 3 5 a 2 72 72 b 2 5 5 c 7 52 52 d 7 52 52 e 5.5 5.5 5.5 f 7 7 7 h 17 2 17 i 51 53 53 k 70 80 85 l 5 5 55 m 10 13 Conductor mm² min 1.5 1.5 1.5 Conductor mm² max Amperes 1 Poles 3 5 3 5 a 75 75 75 75 75 75 b 75 75 75 75 75 75 c 0 0 0 0 0 0 d 0 0 0 0 0 0 e 5.5 5.5 5.5 5.5 5.5 5.5 f 7 7 7 8 8 8 h 17 2 17 3 3 1 i 51 53 53 2 2 2 k 70 80 85 0 0 8 l 5 5 55 0 0 0 m 3.5 7 11.5 12 12 17 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Amperes 3 Poles 3 5 a 107 107 107 b 100 100 100 c 85 85 85 d 77 77 77 e.5.5.5 f 12 12 12 h 5 5 5 i 77 77 77 k l 88 88 88 m 7 7 7 Conductor mm² min Conductor mm² max 25 25 25 Panel Mounting 20 Angle Panel Mounting 15 Angle temperature resistant contact-carrier Panel Mounting Panel Mounting Panel Mounting Panel Mounting Temperature resistant contact-carrier 27

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS s 1 20 15 20 15 125 12 127 1277 1278 127 128 12 1270 1280 1281 1282 127 1275 127 128 1287 1288 Panel Mounting 20 Angle 3 20 15 125 20 15 12000 12001 12002 12 12100 12101 12003 1205 1200 12102 12103 1210 1200 120 12 1210 12107 12108 Panel Mounting 15 Angle 1 135 20 1357 15 1358 135 130 131 135 13 137 Panel Mounting Straight 1 20 15 20 15 1371 1372 1373 13023 1302 13025 137 1375 137 1302 13027 13028 1380 1381 1382 138 13 1370 Panel Mounting Straight 3 135 138 13102 20 13 13 13103 15 137 13100 1310 125 135 20 1352 15 137 1351 1A and A with screw terminals 3A and 125A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin 28 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details Panel Mounting Straight

Dimensions Amperes 1 Poles 3 5 3 5 a 7 100 100 100 100 100 b 2 2 2 2 2 2 c 0 85 85 85 85 85 d 52 77 77 77 77 77 e 5.5 5.5 5.5 5.5 5.5 5.5 f 8 8 8 8 8 8 h 30 28.5 2 50 50 3 i 55 57.5 0 7 7 k 57 5 70 75 75 78 l 52 5 70 75 75 78 a 20 20 20 20 20 20 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Panel Mounting 20 Angle Amperes 3 125 Poles 3 5 3 5 a 11 11 11 11 11 11 b 11 1 11 11 11 11 c 0 0 0 0 0 0 d 0 0 0 0 0 0 e.5.5.5.5.5.5 f 12 12 12 12 12 12 h 5 5 82 82 82 j 80 80 80 0 0 0 k 2 2 2 2 2 2 l 2 2 2 10 10 10 Conductor mm² min 25 25 25 Conductor mm² max 25 25 25 70 70 70 Panel Mounting 15 Angle temperature resistant contact-carrier Amperes 1 Poles 3 5 a 2 72 72 b 2 5 5 c 7 52 52 d 7 52 52 e 5.5 5.5 5.5 f 7 7 7 h 17 2 17 i 57 58 57 k 7 83 3 l 5 5 55 m 10 13 Conductor mm² min 1.5 1.5 1.5 Conductor mm² max Panel Mounting Amperes 1 Poles 3 5 3 5 a 75 75 75 75 75 75 b 75 75 75 75 75 75 c 0 0 0 0 0 0 d 0 0 0 0 0 0 e 5.5 5.5 5.5 5.5 5.5 5.5 f 7 7 7 8 8 8 h 17 2 17 3 3 1 i 57 58 57 5 5 5 k 7 83 3 100 100 10 l 5 5 55 0 0 0 m 3.5 7 11.5 12 12 17 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Panel Mounting Amperes 3 125 Poles 3 5 3 5 a 107 107 107 120 120 120 b 100 100 100 120 120 120 c 85 85 85 100 100 100 d 77 77 77 100 100 100 e.5.5.5.5.5.5 f 12 12 12 21 21 21 h 5.5 5.5 5.5 50 50 50 i 7 7 7 117 117 117 k 113 113 113 12 12 12 l 88 88 88 8 8 8 m 7 7 7 Conductor mm² min 25 25 25 Conductor mm² max 25 25 25 70 70 70 Panel Mounting Temperature resistant contact-carrier 2

Notes: 30

Chemical and Heavy Industry Switched Interlocked Sockets Harbour installation containers, ship yards and shipping lines Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 31

Switched Interlocked Sockets Wear-resistant and impact-resistant plastic Can be equipped with RCD/MCB or RCBO Flip-open window of smoked glass Dirt-repellent opening direction Extensive exclusion of malfunctions Can be locked in 0 off position (3-fold) in the case of all switched interlocked sockets Interlocking mechanism in base for 1A in housing 170 x 0 mm Compact Space-saving IP and IP7 Safe, Robust, Easy to Install

Cable entry with metric thread and splashproof design Corrosion-resistant synthetic housing screws Interlocking mechanism in base Compact and space-saving Switching in load-free state through mechanical interlocking, prevents plugging and unplugging under load Cable entry possible from above and below Robust, compact switch, mounted on top-hat profile rail 3A and 125A with KONTEX-PLUS and screw / clamp terminals No maintenance of the locking parts required IP and IP7 3A and 125A products are fitted with pilot contact Note: This pilot contact should NOT be counted as a main pin Good sealing through foamed seal Free of silicon, CFCs and halogen 33

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Switched Interlocked Sockets 1 115 20 117 15 11 1171 1173 1175 1181 1183 1185 Switched with mechanical double-interlocking 111 20 113 15 115 117 11 1201 1207 1 1211 Switched with mechanical double-interlocking 3 1217 20 121 15 1221 1223 1225 1227 1233 1235 1237 Switched with mechanical double-interlocking 1 11 20 118 15 1170 1172 117 117 1182 118 118 Switched with mechanical double-interlocking 112 20 11 15 11 118 1200 1202 1208 1210 1212 Switched with mechanical double-interlocking 3 1218 20 1220 15 1222 122 122 1228 123 123 1238 Switched with mechanical double-interlocking 125 20 15 123 13 13 135 137 1 Switched with mechanical double-interlocking 3

Dimensions Amperes 1 Poles 3 5 a 0 0 0 b 170 170 170 c 77 77 77 d 137.5 137.5 137.5 e 108 11 121 f 188.5 188.5 10 g Ø h 5.5 5.5 5.5 Amperes Poles 3 5 a 118 118 118 b 225 225 225 c 101 101 101 d 208 208 208 e 137 137 1 f 251 251 251 Ø g.5.5.5 h 8 8 8 i 1x M25 1x M25 1x M25 k 2x M25 2x M25 2x M25 Amperes 3 Poles 3 5 a 10 10 10 b 20 20 20 c 10 10 10 d 20 20 20 e 18 18 18 f 302 302 302 Ø g 8.1 8.1 8.1 h 10 10 10 i 1x M 1x M 1x M k 2x M 2x M 2x M Amperes 1 Poles 3 5 a 0 0 0 b 170 170 170 c 77 77 77 d 137.5 137.5 137.5 e 108 11 121 f 11.5 11.5 11.5 g Ø h 5.5 5.5 5.5 Amperes Poles 3 5 a 118 118 118 b 225 225 225 c 101 101 101 d 208 208 208 e 13 13 1 f 255 255 255 Ø g.5.5.5 h 8 8 8 i 1x M25 1x M25 1x M25 k 2x M25 2x M25 2x M25 Amperes 3 Poles 3 5 a 10 10 10 b 20 20 20 c 10 10 10 d 20 20 20 e 15 15 15 f 30 30 30 Ø g 8.1 8.1 8.1 h 10 10 10 i 1x M 1x M 1x M k 2x M 2x M 2x M Amperes 125 Poles 3 5 a 180 180 180 b 0 0 0 c 10 10 10 d 0 0 0 e 208 208 208 f 510 510 510 Ø g 8.3 8.3 8.3 h.5.5.5 i M0 M0 M0 k M50/M0 M50/M0 M50/M0 Switched with mechanical double-interlocking Switched with mechanical double-interlocking Switched with mechanical double-interlocking Switched with mechanical double-interlocking Switched with mechanical double-interlocking Switched with mechanical double-interlocking Switched with mechanical double-interlocking 35

Plugs and Appliance Inlets 1A and A IP plugs on page 0 are fitted with screw terminals, one piece bodies with Multi-Grip cable gland (except angled plugs). 1A and A IP7 plugs on page 2 are fitted with QUICK-CONNECT terminals, screw together bodies and Multi-Grip cable glands. 3A and 125A IP7 plugs on page 2 are fitted with screw / clamp terminals, screw together bodies and Multi-Grip cable glands. The 1A, A, 3A and 125A appliance inlets on pages - 52 are fitted with screw terminals (3A and 125A with screw / clamp terminals). For QUICK-CONNECT plugs IP 1A - 3A see page 70. 3

Chemical and Heavy Industry Plugs and Appliance Inlets Harbour installation containers, ship yards and shipping lines Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Plugs page 0 Surface Mounting Appliance Inlets page Panel Mounting Appliance Inlets page 8 Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 37

Plugs and Appliance Inlets QUICK-CONNECT 1A and A IP plug housings Lock engages automatically, and securely on closing Lock can be opened by turning clockwise with a screwdriver QUICK-CONNECT 1A and A IP7 plugs have two sealing screws to secure the contact carrier to the housing 3A and 125A plugs have screw-together housings Multi-Grip cable gland Rubber seal, firmly moulded on, facilitates connection No additional seals and rings required 18 flexible laminae adapt to the cable diameter The Multi-Grip screw connection achieves a high tensile strength whilst simultaneously protecting the cable Safe, Robust, Easy to Install 38 Screwless QUICK-CONNECT cage clamp terminals Simple housing connection through pressure screw-thread connection Opening and closing by simply turning around 0º The tensile strength of the -point (quarter turn) locking system is over 200N for 1A, and over 700 N for A

Generous connection space No awkward strain relief, due to Multi-Grip cable gland Cage clamp terminals with 1A and A (or screw terminals are available) Screw / clamp terminals for 3A and 125A 1A and A short and long cable sleeve plugs on page 0 (non QUICK-CONNECT) are fitted with internal cable grip Fibre glass-reinforced and particularly temperature-resistant contact carriers Cable up to 3mm diameter for 3A, up to 50mm diameter for 125A Brass-nickel-plated screw / clamp terminals for 3A and 125A Can accommodate large conductor cross-sections Cable ferrules are not necessary Even contact pressure Minimised transition resistance QUICK-CONNECT cage clamp technology for 1A and A (or screw terminals are available) Brass-nickel-plated screw / clamp terminals for 3A and 125A Accommodation of large cable cross-sections Even contact pressure with minimised transition resistance Screwless QUICK-CONNECT terminals Cable ferrules are not required Terminal is closed by simply pressing a finger on the contact slide Reliable and lasting connection through tension spring technology (cage clamp) The damage-free conductor clamping guarantees optimum connection over the whole service life 3

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Plugs 1 20 15 20 15 21000-TLS 21001-TLS 21002-TLS 21012-TLS 21013-TLS 2101-TLS 21003-TLS 2100-TLS 21005-TLS 21015-TLS 2101-TLS 21017-TLS 2100-TLS 21010-TLS 203-TLS 21021-TLS 21022-TLS 20-TLS Plug with Multi-Grip Cable Gland One piece body 1 20 15 230 231 2 1A and A with screw terminals 233 23 235 23 Angled Plug with Short Cable Sleeve 3 2102 20 210 15 21025 21 2150 2151 2153 215 2155 3A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Plug with Multi-Grip Cable Gland Screw / clamp terminals All items on this page have screw terminals. 125A is only available in IP7 see page 2. 0 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 Ø a 5 0 71 71 80 b.5 8 101 115 115 11 c 138 12 15 170 170 17 d 101.5 105.5 108.5 12 12 128 Ø e 18 18 18 23 23 23 f 5. 71 7 7 85 Conductor mm² min 1 1 1 2.5 2.5 2.5 Conductor mm² max 2.5 2.5 2.5 Plug with Multi-Grip Cable Gland One piece body Amperes 1 Poles 3 5 a 80 85 b 5 Ø c.5.5 8 Ø d 18 18 18 e 51 57 f 0 85 7 Conductor mm² min 1.5 1.5 1.5 Conductor mm² max Angled Plug with Short Cable Sleeve Amperes 3 Poles 3 5 Ø a b 1 1 1 c 25 25 25 d 178 178 178 Ø e 3 3 3 Conductor mm² min Conductor mm² max 1 1 1 Plug with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket Max cable diameter 3mm Screw / clamp terminals 1

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Plugs 1 20 15 20 15 21237 21238 2102 2108 2120 210 2103 21250 213 2 21251 21351 210 2107 2123 2113 211 2121 Plug QUICK-CONNECT with Multi-Grip Cable Gland The range of QUICK-CONNECT products are shown on pages 1-73 3 2180 20 2181 15 2182 2183 218 2185 2187 2188 218 Plug with Multi-Grip Cable Gland 125 210 20 211 15 212 213 21 215 217 218 21 3A and 125A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Plug with Multi-Grip Cable Gland All items on this page are IP7 watertight 2 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 Ø a 70 78 8 101 b 5 5 7 118 118 117 c 15 15 152 178 178 181 d 111 111 11 13 13 138.5 Ø e 18 18 21 23 23 27 Conductor mm² min 1 1 1 2.5 2.5 2.5 Conductor mm² max 2.5 2.5 2.5 Plug QUICK-CONNECT with Multi-Grip Cable Gland Screwless terminals Multi-Grip cable gland system with moulded-in gasket Nickel-plated contacts High temperature resistant contact carrier Amperes 3 Poles 3 5 Ø a 113.5 113.5 113.5 b 1 1 1 c 25 25 25 d 177 177 177 Ø e 3 3 3 Conductor mm² min Conductor mm² max 1 1 1 Plug with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket High temperature resistant contact carrier Screw / clamp terminals Nickel-plated contacts Amperes 125 Poles 3 5 Ø a 12 12 12 b 181 181 181 c 282 282 282 d 20 20 20 Ø e 50 50 50 Conductor mm² min 1 1 1 Conductor mm² max 50 50 50 Plug with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket High temperature resistant contact carrier Screw / clamp terminals Nickel-plated contacts 3

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Appliance Inlets 1 2 20 25 15 2 27 28 2 213 21 215 Surface Mounting Appliance Inlet 20 15 217 218 21 1A and A with screw terminals 2170 2171 2172 217 2177 21 Surface Mounting Appliance Inlet 3 20 15 233 2205 213 3A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Surface Mounting Appliance Inlet 1 20 20 Surface Mounting Appliance Inlet 1 20 22 As above with hinged lid As above with hinged lid 1 20 15 20 15 20 21 22 2335 2017 23 2 25 2018 2 270 271 2012 Surface Mounting Appliance Inlet With hinged lid 1A and A with screw terminals Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 a 51 5 5 b - 11 11 c 75 75 d Ø e.1 5.1 5.1 f 3 10 h 122 135 135 i 87 100 100 k 0 - - Conductor mm² min 1 1 1 Conductor mm² max 2.5 2.5 2.5 Surface Mounting Appliance Inlet Amperes 1 Poles 5 3 5 a 83 83 83 83 b 12 12 12 12 c 155.5 15 15 1 d 122 128 128 130 e 8 8 8 8 f 11 11 11 11 Ø h 5.5 5.5 5.5 5.5 i.5.5.5.5 Ø k 12 12 12 12 l 5 5 5 5 m 80 80 80 80 Ø n 10 10 10 10 p Pg 21 M25 M25 M25 r 2xPg 21 2xM25 2xM25 2xM25 Conductor mm² min 1.5 2.5 2.5 2.5 Conductor mm² max Surface Mounting Appliance Inlet Amperes 3 Poles 3 5 a 118 118 118 b 170 170 170 c 25 25 25 d 17 17 17 e 10 10 10 f 13 13 13 Ø h.1.1.1 i Conductor mm² min Conductor mm² max 1 1 1 Surface Mounting Appliance Inlet Amperes 1 Poles 3 a 5.5 b 0 c 3 d 73 e 2.5 f 23.5 Ø h 5.5 i 3 Conductor mm² min 1 Conductor mm² max 2.5 With hinged lid Amperes 1 Poles 3 a 5.5 b 0 c 3 c1 7.5 d 73 d1 8 e 2.5 f 23 Ø h 5.5 i 3 i1 1 Conductor mm² min 1 Conductor mm² max 2.5 Amperes 1 Poles 3 a 75 b 87 100 c 138 150 d 111 120 e 51 5 f - 11 Ø h.1 5.1 i.5.5 k 0 - l M20 M20 m for M20 for M20 Conductor mm² min 1 1 Conductor mm² max 2.5 2.5 With hinged lid Amperes 1 Poles 5 3 5 a 8 0 0 0 b 8 75 75 75 c 12 138 138 13 c1 138 1 1 150 d 101 111 d1 105 11 11 115 e 5.5 5.5 5.5 5.5 f 5 5 5 h 78 78 78 i - 13 13 13 Ø k 23 2 2 2 l M20 M25 M25 M25 5

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Appliance Inlets 1 20 15 20 15 272 273 27 215 2020 275 27 277 2021 281 282 283 202 Surface Mounting Appliance Inlet 1 20 15 20 15 28 285 28 221 2023 287 288 28 202 23 2 25 2013 * As above with Fastening Cap 1A and A with screw terminals 3 20 15 218 2185 2035 202 Surface Mounting Appliance Inlet 125 217 20 218 15 21 2200 2202 Surface Mounting Appliance Inlet Top M50 Cable Entry 125 20 15 2007 2008 2010 3A and 125A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Surface Mounting Appliance Inlet Top M0 Cable Entry Bottom 1x M0/M50 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 a 75 8 b 87 100.0 8 c 137 151 13 d 112 11 - e 51 5 - f - 11 - Ø h.1 5.1 - i.5.5 - k 0 - - l - - 111 m - - n - - Ø o - - 5.5 p M20 M20 - r - - M20 Ø s - - 23 t M20 M20 - Amperes Poles 3 5 a 0 0 0 b 75 75 75 c 78 78 78 d 5 5 5 Ø e 5.5 5.5 5.5 f 28 28 28 g 122 122 123 h 138 138 13 i 13 13 13 Ø k 2 2 2 Amperes 3 Poles 3 5 a 118 118 118 b 170 170 170 c 25 25 25 d 17 17 17 e 10 10 10 f 13 13 13 Ø h.1.1.1 i Conductor mm² min Conductor mm² max 1 1 1 Amperes 125 Poles 3 5 a 10 10 10 b 20 20 20 c 3 3 3 d 15 15 15 e 10 10 10 f 20 20 20 Ø h 8.3 8.3 8.3 i 10 10 10 Conductor mm² min 1 1 1 Conductor mm² max 50 50 50 Amperes 125 Poles 3 5 a 180 180 180 b 0 0 0 c 10 10 10 d 0 0 0 e 220 220 220 f 52 52 52 Ø g 8.3 8.3 8.3 h.5.5.5 i M0 M0 M0 k M0/50 M0/50 M0/50 Conductor mm² min 1 1 1 Conductor mm² max 50 50 50 Surface Mounting Appliance Inlet As above with Fastening Cap Surface Mounting Appliance Inlet Surface Mounting Appliance Inlet Surface Mounting Appliance Inlet 7

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Appliance Inlets 1 20 15 20 15 20 21 22 22 23 2 25 23 210 211 212 200 Panel Mounting Appliance Inlet 1 20 15 20 15 213 21 215 25 21 217 218 2 222 223 22 201 Panel Mounting Appliance Inlet 1 20 15 20 15 225 22 227 25 228 22 230 257 23 235 23 255 Panel Mounting Appliance Inlet With hinged lid 1 20 15 20 15 237 238 23 25 20 21 22 20 2 27 23 20 Panel Mounting Appliance Inlet With fastening cap 1 20 15 20 15 282 2817 2811 2827 2873 2831 2830 281 2815 Panel Mounting Appliance Inlet A retaining nose on panel for the connector is recommended 1A and A with screw terminals 8 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 a 7 75 8 0 0 0 b 8 100 8 75 75 75 c 58 2 78 78 78 d 7 5 5 5 Ø e 5.5.3 5.5 5.5 5.5 5.5 f 12 12 7 7 7 7 g 70 77 78 8 8 88 h 128 15 12 138 138 10 i - - - 13 13 13 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Panel Mounting Appliance Inlet Amperes 1 Poles 3 5 3 5 a 7 75 8 0 0 0 b 8 100 8 75 75 75 c 58 2 78 78 78 d 7 5 5 5 Ø e 5.5.3 5.5 5.5 5.5 5.5 f 12 12 7 7 7 7 g 80 88 0 100 100 101 h 128 15 12 138 138 13 i - - - 13 13 13 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Panel Mounting Appliance Inlet Amperes 1 Poles 3 5 3 5 a 7 75 8 0 0 0 b 8 100 8 75 75 75 c 58 2 78 78 78 d 7 5 5 5 Ø e 5.5.3 5.5 5.5 5.5 5.5 f 12 12 2 2 2 2 g 78 88 105 11 11 115 h 13 151 138 1 1 150 i - - - 13 13 13 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Panel Mounting Appliance Inlet With hinged lid Amperes 1 Poles 3 5 3 5 a 7 75 8 0 0 0 b 8 100 8 75 75 75 c 58 2 78 78 78 d 7 5 5 5 Ø e 5.5.3 5.5 5.5 5.5 5.5 f 12 12 7 7 7 7 g 80 88 0 100 100 101 h 133 152 13 17 17 18 i - - - 13 13 13 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Panel Mounting Appliance Inlet With fastening cap Amperes 1 Poles 3 5 3 5 a 75 75 75 75 75 75 b 75 75 75 75 75 75 c 0 0 0 0 0 0 d 0 0 0 0 0 0 Ø e 5.5 5.5 5.5 5.5 5.5 5.5 f 7 7 7 7 7 7 h 3 3 3 53 53 53 i 2 2 2 30 30 30 k 2 8 1 57 57 0 m 30 30 25 28 28 30 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Panel Mounting Appliance Inlet A retaining nose on panel for the connector is recommended

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Appliance Inlets 1 3 20 15 20 15 20 15 2705 270 2707 2758 275 270 2770 2771 2772 2708 270 2751 271 272 273 2773 277 2775 2755 275 2757 277 278 27 277 2780 2781 Panel Mounting Appliance Inlet 10 Angle 1 3 20 15 20 15 20 15 2782 2783 278 27 275 27 2700 27007 27008 2785 278 2787 277 278 27 2700 27010 27011 271 272 273 27003 2700 27005 27015 2701 27017 Panel Mounting Appliance Inlet 10 Angle 125 20 15 2735 273 2737 2738 273 270 272 273 27 Panel Mounting Appliance Inlet 15 Angle 3 20 15 2880 283 2833 2837 Panel Mounting Appliance Inlet Straight 3 20 15 2881 2835 283 2838 As above but 125 2882 20 280 15 1A and A with screw terminals 281 287 Panel Mounting Appliance Inlet Straight 3A and 125A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin 50 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 3 Poles 3 5 3 5 3 5 a 85 85 85 85 85 85 107 107 107 b 85 85 85 85 85 85 100 100 100 c 70 70 70 70 70 70 85 85 85 d 70 70 70 70 70 70 77 77 77 e.3.3.3.3.3.3.5.5.5 f 11 11 11 11 11 11 12 12 12 g 10 11 121 121 127 155 155 155 i 83 0 2 100 118 118 118 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 1 1 1 Amperes 1 3 Poles 3 5 3 5 3 5 a 85 85 85 85 85 85 107 107 107 b 85 85 85 85 85 85 100 100 100 c 70 70 70 70 70 70 85 85 85 d 70 70 70 70 70 70 77 77 77 e.3.3.3.3.3.3.5.5.5 f 11 11 11 11 11 11 12 12 12 h 10 11 121 121 127 155 155 155 i 83 0 2 100 118 118 118 k 70.5 7.5 8.5 5 5 101.5 113.5 113.5 113.5 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 1 1 1 Amperes 125 Poles 3 5 a 130 130 130 b 120 120 120 c 108 108 108 d 100 100 100 e.3.3.3 f 5 5 5 h 31 31 31 i 1 1 1 k 8 8 8 Conductor mm² min 25 25 25 Conductor mm² max 70 70 70 Amperes 125 Poles 3 5 a b 10 10 10 c 0 0 0 d 0 0 0 Ø e 5.5 5.5 5.5 f 13 13 13 h i 1 1 1 Conductor mm² min Conductor mm² max 25 25 25 Appliance Inlet with Flange A retaining nose on panel for the connector is recommended As above but Amperes 125 Poles 3 5 a 120 120 120 b 120 120 120 c 100 100 100 d 100 100 100 Ø e.5.5.5 f 13 13 13 h 11 11 11 i 20 20 20 k 10 10 10v Conductor mm² min 25 25 25 Conductor mm² max 70 70 70 51

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Appliance Inlets 1 20 15 20 15 28 28105 28101 28107 28103 2810 Panel Mounting Appliance Inlet Straight Cover for Appliance Inlet & Plugs (Suitable for IP7 only) Part No. 830 Cover for 1A 3P W/T A.I./plug 831 Cover for 1A 5P W/T A.I./plug 8 Cover for A 5P W/T A.I./plug 833 Cover for 3A W/T A.I./plug 83 Cover for 125A W/T A.I./plug 835 Cover for 1A P W/T A.I./plug 837 Cover for A 3PP W/T A.I./plug 52 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 a 85 85 85 85 85 85 b 85 85 85 85 85 85 c 70 70 70 70 70 70 d 70 70 70 70 70 70 Ø e.3.3.3.3.3.3 f 11 11 11 11 11 11 h 75.5 75 7.5 85 85 85 i k 70.5 78.5 8.5 101.5 Ø l Conductor mm² min 1 1 1 2.5 2.5 2.5 Conductor mm² max 2.5 2.5 2.5 53

Connectors (Couplers) 1A and A IP connectors on page 58 are fitted with screw terminals, one piece bodies with Multi-Grip cable glands/except angled connectors. 1A and A IP7 connectors on page 0 are fitted with QUICK-CONNECT terminals, screw together bodies and Multi-Grip cable glands. 3A and 125A IP7 connectors on page 0 are fitted with screw/clamp terminals, screw together bodies and Multi-Grip cable glands. For QUICK-CONNECT connectors IP 1A - 3A see page 72. 5

Chemical and Heavy Industry Connectors (Couplers) Harbour installation containers, ship yards and shipping lines Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 55

Connectors (Couplers) Screwless QUICK-CONNECT cage clamp terminals Simple housing connection through pressure screw-thread connection Opening and closing by simply turning around 0º The tensile strength of the -point (quarter turn) locking system is over 200 N for 1A, and over 700 N for A Multi-Grip cable gland Rubber seal, firmly moulded on, facilitates connection No additional seals and rings required 18 flexible laminae adapt to the cable diameter The Multi-Grip screw connection achieves a high tensile strength whilst simultaneously protecting the cable Safe, Robust, Easy to Install 5 QUICK-CONNECT 1A and A IP connector housings Lock engages automatically and securely on closing Lock can be opened by turning clockwise with a screwdriver QUICK-CONNECT 1A and A IP7 connectors have two sealing screws to secure the contact carrier to the housing 3A and 125A connectors have screw-together housings

Generous connection space No awkward strain relief, due to Multi-Grip cable gland Cage clamp terminals with 1A and A (or screw terminals are available) Screw / clamp terminals for 3A and 125A 1A and A short and long cable sleeve connectors on page 5 (non QUICK-CONNECT) are fitted with internal cable grip KONTEX-PLUS - very good contact rating results Self-cleaning Defined contact operation Almost unchanging with drawing forces Excellent heat dissipation High copper content guarantees good current flow Fibre glass-reinforced and particularly temperature resistant contact carriers Brass-nickel-plated screw / clamp terminals for 3A and 125A Cable ferrules are not necessary Even contact pressure Minimised transition resistance QUICK-CONNECT tension spring clamping technology for 1A and A (or screw terminals are available) Brass-nickel-plated screw / clamp terminals for 3A and 125A Accommodation of large cable cross-sections Even contact pressure with minimised transition resistance 57

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Connectors 1 20 15 20 31000-TLS 31001-TLS 31002-TLS 31012-TLS 31013-TLS 31003-TLS 3100-TLS 31005-TLS 31015-TLS 3101-TLS 15 3101-TLS 31017-TLS 30-TLS 3100-TLS 31010-TLS 303-TLS 31021-TLS 31022-TLS Connector with Multi-Grip Cable Gland One Piece Body 1 20 330 1A and A with screw terminals Angled Connector with Short Cable Sleeve 3 3108 20 310 15 310 31 3150 3151 3153 315 3112 3A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Connector with Multi-Grip Cable Gland Screw / clamp terminals All items on this page have screw terminals. 125A is only available in IP7 see page 0. 58 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 Ø a 51 58 5 7 7 73 b 15 18 15 185 185 185 c 7 8 0 102 Connector with Multi-Grip Cable Gland Screw terminals Ø e 18 18 18 23 23 23 Conductor mm² min 1 1 1 2.5 2.5 2.5 Conductor mm² max 2.5 2.5 2.5 Amperes 1 Poles 3 a 5 b 7 c 13 Angled Connector with Short Cable Sleeve Ø d.5 Ø e 13 Conductor mm² min 1.5 Conductor mm² max 2.5 Amperes 3 Poles 3 5 Ø a 5 5 5 b 23 23 23 c 10 10 10 Ø d 3 3 3 Conductor mm² min Conductor mm² max 1 1 1 Connector with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket High temperature resistant contact carrier Screw / clamp terminals Nickel plated contacts 5

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Connectors 1 20 15 20 15 3128 3120 312 31307 312 31308 31301 31302 3121 3130 31310 3125 31305 3130 3123 31313 3131 3127 Connector with Multi-Grip Cable Gland The range of QUICK-CONNECT products are shown on pages 2, 0, 2, 102 3 3180 20 3181 15 3182 3183 318 3185 3187 3188 312 Connector with Multi-Grip Cable Gland Screw / clamp terminals 125 310 20 311 15 312 313 31 315 317 318 31 3A and 125A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Connector with Multi-Grip Cable Gland Screw / clamp terminals All items on this page are IP7 watertight 0 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Connector Amperes 1 Poles 3 5 3 5 Ø a 70.5 78 8.5 101.5 b 11 11 18 1 1 200 c 77 83 3 107 Ø d 18 18 21 23 23 27 Conductor mm² min 1 1 1 2.5 2.5 2.5 Conductor mm² max 2.5 2.5 2.5 with Multi-Grip Cable Gland Screwless terminals Multi-Grip cable gland system with moulded-in gasket Nickel-plated contacts High temperature resistant contact carrier Amperes 3 Poles 3 5 Ø a b 23 23 23 c 113 113 113 Ø d 3 3 3 Conductor mm² min Conductor mm² max 1 1 1 Connector with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket High temperature resistant contact carrier Screw / clamp terminals Nickel-plated contacts Amperes 125 Poles 3 5 Ø a 125 125 125 b 300 300 300 c 128 128 128 Ø d 50 50 50 Conductor mm² min 1 1 1 Conductor mm² max 50 50 50 Connector with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket High temperature resistant contact carrier Screw / clamp terminals Nickel-plated contacts 1

Notes: 2

Chemical and Heavy Industry Harbour installation containers, ship yards and shipping lines For on-site savings up to 50% Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties s page Plugs page 70 Connectors page 72 Power generation and distribution Oil and gas (non hazardous areas) Additional products can be found on pages: 2, 0, 2 and 102 Film, TV and outdoor events 3

The product that sets new industry standards A latest generation of products providing quality and performance with unique time saving fully screwless installation techniques. The unique combination of screw-less terminations and quick release housings guarantees that our latest range of QUICK-CONNECT plugs and connectors require the minimum time for wiring original installations and emergency repair jobs. Plug and socket connectors assembly 1A and A Quick, positive and fully protected Terminal housing with appropriate plug or socket connectors are supplied loosely connected (not locked) for immediate start and time saving. IP7 protection available. IP7 has two sealing screws to secure the contact carrier to the housing. Insert cable through cable sleeve and strip cable and conductors. Insert conductor into appropriate terminal and push down the colour coded contact slides to clamp conductor securely into position (slides coloured in accordance with current wiring regulations). New automatic cable clamping for 1A and A sleeved plugs and connectors The action of twisting the housings together automatically forces an internal cage moulding into a tapered conical area which securely clamps the cable into position. No time wasting saddle clamp screws to be tightened, with a permanent and positive high pull-out load always being maintained. To join housings, line-up arrowhead moulded into rim of plug / socket housings with the open lock symbol on the terminal housing. Push housings together and twist 10 until they click into the locked position. Four catches now securely hold the housings together. Automatic cable clamping guarantees positive pull-out load.

To open housings To open housings simply insert screwdriver blade into slot alongside the closedlock symbol moulded onto rim of terminal housing. Depress catch and twist housings 10 in opposite directions, then pull apart. To release cable terminations, simply lift contact slides. Nothing could be easier, simpler or quicker. Lift contact slide to release cable. Our QUICK-CONNECT range of industrial plugs and sockets has been extended to cover both 1 and amp sizes. In addition, the design has been developed to become even quicker to install, showing even greater savings for on-site tasks. Our unique screwless cable termination system has now been supplemented with an automatic cable clamping feature (no saddle clamp screws to tighten or lose). In addition, our twist to connect/disconnect housings feature a simple press-torelease opening with a secure point locking feature that can give up to IP55 protection. When fitting panel mounted sockets to enclosures, the length of cable tails can now also now be accurately determined, showing appreciable savings on wasted cable. QUICKCONNECT now requires the minimum wiring time for any comparable product. Quick release housings Screwless terminals Automatic cable clamping Maintenance free Shock & vibration resistant Corrosion protected 1A and A: 3//5 pole Up to IP7 protection Contacts Self cleaning corrosion resistant nickel contacts Corrosion-free spring Low insert and withdrawal forces Defined conductivity Increased copper content guarantees better conductivity and lower temperature rise 5

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS s 1 20 15 20 15 1112 1185 1118 111 5 1122 112001 112002 Surface Mounting Top Cable Entry Only 118 20 11 15 115 112 Surface Mounting Top & Bottom Cable Entry 3 20 15 15 383 Surface Mounting Top & Bottom Cable Entry Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 a 5.5 72. 72. 7.1 7.1 7.1 b 0 0 0 2 2 2 c 130 130 131 12 12 12 d 85 8 103 103 10 e 2 77 77 8 8 8 f 33.5 33.5 33.5 30 30 30 h i 5.5 5.5 5.5 5.5 5.5 5.5 k 8 Ø l 21 21 21 21 21 21 m 72 87 87 n M20 M25 M25 M25 M25 M25 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Surface Mounting Screwless terminals maintenance free Cable entry, one at top (open) Amperes Poles 3 5 a 83 83 83 b 12 12 12 c 155 155 155 d 130 130 13 e 8 8 8 f 11 11 11 Ø h 5.5 5.5 5.5 i.5.5.5 Ø k 12 12 12 l 5 5 5 m 80 80 80 Ø n 10 10 10 o M25 M25 M25 p 2xM25 2xM25 2xM25 Conductor mm² min 2.5 2.5 2.5 Conductor mm² max 10 10 10 Surface Mounting Screwless terminals maintenance free Cable entry, one at top (open), two at bottom and one rear entry (closed) Base of enclosure can rotate 180º drill-holes prestamped in the base of enclosure Amperes 3 Poles 5 a 118 118 b 170 170 c 223 223 d 18 18 e 10 10 f 13 13 Ø h.1.1 i k M0 M0 l M/ M/ Conductor mm² min Conductor mm² max 25 25 Surface Mounting Screwless terminals maintenance free Cable entry, one at top (open), two at bottom (closed) 7

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS s 1 20 15 20 15 12771 12772 1270 1271 12753 127 12757 1278 Panel Mounting 20 Angle 1 137 20 138 15 Panel Mounting Straight 1 20 15 20 15 1385 138 13702 13703 133 13710 1001 1002 Panel Mounting Straight Flange 75 x 75mm 8 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 a 7 85 85 85 85 85 b 2 85 85 85 85 85 c 0 70 70 70 70 70 d 52 70 70 70 70 70 ø e 5.5 5.5 5.5 5.5 5.5 5.5 f 8 8 8 8 8 8 h 1 1 1 i 8 58 0 8 8 k 57 - - - - - l 52 5 70 78 78 78 a 20 20 20 20 20 20 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Panel Mounting Screwless terminals maintenance free 20º angle 2Flange 7 x 2mm at 1A 3P, 85 x 85mm for the other versions Amperes 1 Poles 3 a 2 b 2 c 7 d 7 ø e 5.5 f 7 h 35.5 i 51 k 70 ø l 5 m 10 Conductor mm² min 1.5 Conductor mm² max Amperes 1 Poles 3 5 3 5 a 75 75 75 75 75 75 b 75 75 75 75 75 75 c 0 0 0 0 0 0 d 0 0 0 0 0 0 ø e 5.5 5.5 5.5 5.5 5.5 5.5 f 7 7 7 8 8 8 h 35.5 35.5 35.5 50 50 50 i 51 53 53 2 2 2 k 70 80 85 0 0 8 ø l 5 5 55 0 0 0 m 3.5 7 11.5 12 12 17 Conductor mm² min 1.5 1.5 1.5 2.5 2.5 2.5 Conductor mm² max 10 10 10 Panel Mounting Screwless terminals maintenance free Flange 2 x 2mm at 1A 3P Panel Mounting Screwless terminals maintenance free Flange 75 x 75mm

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Plugs 1 20 15 20 15 210100 2100 210330 2100 21005 21007 212001 212002 Plug with Cable Sleeve Screwless terminals 1 20 15 20 15 2125 212 2183 2137 2138 218 21872 212 2130 21873 211 212 21017 2180 213 21013 2182 218 Plug with Multi-Grip Cable Gland Screwless terminals 3 20 15 21071 21075 3A with screwless terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Plug with Multi-Grip Cable Gland Screwless terminals 70 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 Ø a 53 5 70 70 75 b 125.5 133 11 15 15 15 c 8.5.5 10.5 11 11 11 Ø d 5 5 7 8 8 8.5 Ø e 1.5 15.5 17.5 23.5 23.5 2 Conductor mm² min 1 1 1 2.5 2.5 2.5 Conductor mm² max 2.5 2.5 2.5 Plug Moulded cable sleeve -point (quarter turn) locking system Screwless terminals Amperes 1 Poles 3 5 3 5 Ø a 53 0 7.5 7.5 7.5 b 3.5 100.5 103 121 121 121.5 c 13 11 12 17 17 17.5 d 7.5 10.5 105.5 128 128 128.5 Ø e 18 18 18 23 23 23 f 57.5.5 70.5 78 78 80 Conductor mm² min 1 1 1 2.5 2.5 2.5 Conductor mm² max 2.5 2.5 2.5 Plug with Multi-Grip Cable Gland Screwless terminals -point (quarter turn) locking system Multi-Grip cable gland system with moulded-in gasket Amperes 3 Poles 5 Ø a b 153 153 c 233 233 d 17 17 Ø e 3 3 Conductor mm² min Conductor mm² max 1 1 Plug with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket Max cable diameter 3mm Screwless terminals 71

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Connectors 1 20 15 20 15 3188 31880 310085 31882 31881 31883 312001 312002 Connector with Cable Sleeve Screwless terminals 1 20 15 20 15 3125 312 315 3137 3138 31 3181 312 3130 3173 311 312 312 312 313 317 31 318 Connector with Multi-Grip Cable Gland Screwless terminals 3 20 15 3100 310 3A with screwless terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Connector with Multi-Grip Cable Gland Screwless terminals 72 Other voltages and frequencies are available on request. Contact CEE Norm UK for further details

Dimensions Amperes 1 Poles 3 5 3 5 Ø a 53 58 7 b 12 17 15.5 181 181 181 Ø c 5 5 7 8 8 8.5 Ø d 1.5 15.5 17.5 23.5 23.5 2 e 72 78 85 0 0 Conductor mm² min 1 1 1 2.5 2.5 2.5 Conductor mm² max 2.5 2.5 2.5 Connector Moulded cable sleeve -point (quarter turn) locking system Screwless terminals Amperes 1 Poles 3 5 3 5 Ø a 53 0 7.5 7.5 7.5 b 10.5 11.5 117.5 137.5 137.5 138.5 c 15 157 158 10 10 11 d 7.5 10.5 105.5 127.5 127.5 128.5 Ø e 18 18 18 23 23 23 f 7 8 2 2 7 Conductor mm² min 1 1 1 2.5 2.5 2.5 Conductor mm² max 2.5 2.5 2.5 Connector with Multi-Grip Cable Gland Screwless terminals -point (quarter turn) locking system Multi-Grip cable gland system with moulded-in gasket Amperes 3 Poles 5 Ø a 5 5 b 251 251 c 10 10 Ø d 3 3 Conductor mm² min Conductor mm² max 1 1 Connector with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket Max cable diameter 3mm Screwless terminals Nickel plated contacts 73

Notes: 7

Chemical and Heavy Industry Harbour installation containers, ship yards and shipping lines Low Voltage Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Surface Mounting s page 78 Panel Mounting s page 78 Surface Mounting Appliance Inlets page 80 Plugs page 80 Connectors page 80 Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 75

Low Voltage Plugs and Sockets Connection of different cable diameters possible through additional strain relief Strain relief with metric screws Wall socket for through-wiring Generous connection space Removable socket insert facilitates connection Rotatable base (180º) Compact construction Clear voltage identification through colour coding Plugs and couplers available with cable gland connection or long cable sleeve Low voltage products have screw terminals Safe, Robust, Easy to Install 7

Low voltage plug-type devices 3A Manufactured based on CEE regulations in terms of form and safety Based on conventional plug-type devices Highly heat-resistant contact carrier Low voltage devices 3A to 50V and frequencies up to 500Hz Arrangement overview of the contact bushes According to DIN VDE 0100, for certain application areas the protective measure of low voltage or fuse disconnection is prescribed, such as e.g. mobile lamps in an environment of conductive materials (boilers, pipework or portable wet grinding machines etc). See DIN VDE 0100/5.73 sections 33, 3 part 70/11.82, part 10/11.83. The standard DIN/EN 030 part 2 includes only 1 A and A low-voltage plug-type devices. In practice, the demand for devices with higher rated currents is constantly increasing. For this requirement, we have produced the 3 A low-voltage device range for the various voltages and frequencies (see table). In terms of form and safety engineering, these are manufactured according to CEE regulation. The standard types are tested at the electro-technical testing agency in Munich, in accordance with DIN VDE 023/3.77 sections 20, 21 and 22 contact rating - normal operation - temperature increase. 77

A CURRENT V VOLTAGE Hz FREQUENCY KEY 2 PIN POS 3 PIN KEY POS Low Voltage 1 2 2 50 50 50 2 2 50 50 50 100-200 300 100-200 300 10 11 12 12 13 2 15 10 111 112 12 113 11 2 11 10 1 17 18 1 117 118 11 120 12 2 12 2 Surface Mounting M25 Top Entry 1 2 2 50 50 50 2 2 50 50 50 100-200 300 100-200 300 20 21 12 22 23 2 25 10 211 212 12 213 21 2 21 10 2 27 28 2 217 218 21 220 12 2 12 2 Panel Mounting 20ºAngle Flange 8 x 2mm Fixing centres 53 x 7mm 1 2 2 50 50 50 2 2 50 50 50 100-200 300 100-200 300 30 31 12 33 2 35 10 311 312 12 313 31 2 31 10 3 37 38 3 317 318 31 0 12 2 12 2 Panel Mounting Socket Straight Flange 55 x 55mm Fixings 5 x 5mm 1 2 2 50 50 50 2 2 50 50 50 100-200 300 100-200 300 35 355 12 35 357 2 35 10 35 3 12 37 38 2 370 10 30 31 33 371 372 373 37 12 2 12 2 Panel Mounting Socket Straight Flange 75 x 75mm Fixings 0 x 0mm 78

Dimensions Amperes 1 Poles 2 3 2 3 a 70 70 70 70 b 80 80 80 80 c 113 113 113 113 d 80 80 80 80 e 55 55 55 55 f 11 11 11 11 Ø h 5.2 5.2 5.2 5.2 i 5 5 5 5 k M25 M25 M25 M25 Conductor mm² min Conductor mm² max 10 10 10 10 Amperes 1 Poles 2 3 2 3 a 8 8 8 8 b 2 2 2 2 c 53 53 53 53 d 7 7 7 7 Ø e 5.2 5.2 5.2 5.2 f h 3 3 3 3 i 35 35 35 35 x 20 20 20 20 n 5 5 5 5 m 52 52 52 52 Conductor mm² min Conductor mm² max 10 10 10 10 Amperes 1 Poles 2 3 2 3 a 55 55 55 55 b 55 55 55 55 c 5 5 5 5 d 5 5 5 5 Ø e 5.2 5.2 5.2 5.2 f h 22 22 22 22 i 37 37 37 37 k 7 7 7 7 l m 12 12 12 12 Conductor mm² min Conductor mm² max 10 10 10 10 Amperes 1 Poles 2 3 2 3 a 75 75 75 75 b 75 75 75 75 c 0 0 0 0 d 0 0 0 0 Ø e 5.2 5.2 5.2 5.2 f h 22 22 22 22 i 37 37 37 37 k 7 7 7 7 l m 2 2 2 22 Conductor mm² min Conductor mm² max 10 10 10 10 Surface Mounting M25 Top Entry Panel Mounting 20ºAngle Flange 8 x 2mm Fixing centres 53 x 7mm Panel Mounting Socket Straight Flange 55 x 55mm Fixings 5 x 5mm Panel Mounting Socket Straight Flange 75 x 75mm Fixings 0 x 0mm 7

A CURRENT V VOLTAGE Hz FREQUENCY KEY 2 PIN POS 3 PIN KEY POS Low Voltage 1 2 2 50 50 50 2 2 50 50 50 100-200 300 100-200 300 0 1 2 3 5 11 12 13 1 1 12 2 10 12 2 10 7 8 17 18 1 20 12 2 12 2 Surface Mounting Appliance Inlet M25 Top Entry 1 2 2 50 50 50 2 2 50 50 50 100-200 300 100-200 300 0 1 12 2 3 2 5 10 11 12 12 13 1 2 1 10 7 8 17 18 1 20 12 2 12 2 Plug with Cable Sleeve 1 2 2 50 50 50 2 2 50 50 50 100-200 300 100-200 300 50 51 12 52 53 2 55 10 511 512 12 513 51 2 51 10 5 57 58 5 517 518 51 520 12 2 12 2 Connector with Cable Sleeve 1 2 2 50 50 50 2 2 50 50 50 100-200 300 100-200 300 22 23 12 2 25 2 27 10 33 3 12 35 3 2 38 10 28 2 30 31 3 0 1 2 12 2 12 2 Plug with Cable Gland 80 1 2 2 50 50 50 2 2 50 50 50 100-200 300 100-200 300 522 523 12 52 525 2 527 10 533 53 12 535 53 2 538 10 528 52 530 531 53 50 51 52 12 2 12 2 Connector with Cable Gland

Dimensions Amperes 1 Poles 2 3 2 3 a 70 70 70 70 b 80 80 80 80 c 100 100 100 100 d 82 82 82 82 e 55 55 55 55 f 11 11 11 11 Ø h 5.2 5.2 5.2 5.2 i 5 5 5 5 k M25 M25 M25 M25 Conductor mm² min Conductor mm² max 10 10 10 10 Amperes 1 Poles 2 3 2 3 a 2 2 2 2 b 15 15 15 15 c 55 55 55 55 Ø d 7 7 7 7 Ø e 2.5 2.5 2.5 2.5 f 123 123 123 123 i 50 50 50 50 Conductor mm² min Conductor mm² max 10 10 10 10 Surface Mounting Appliance Inlet M25 Top Entry Plug with Cable Sleeve Amperes 1 Poles 2 3 2 3 a 2 2 2 2 b 158 158 158 158 c 7 7 7 7 Ø d 7 7 7 7 Ø e 2.5 2.5 2.5 2.5 Conductor mm² min Conductor mm² max 10 10 10 10 Connector with Cable Sleeve Amperes 1 Poles 2 3 2 3 a 2 2 2 2 b 12 12 12 12 c 55 55 55 55 Ø d 2.5 2.5 2.5 2.5 f 107 107 107 107 i 50 50 50 50 Conductor mm² min Conductor mm² max 10 10 10 10 Plug with Cable Gland Amperes 1 Poles 2 3 2 3 a 2 2 2 2 b 12 12 12 12 c 7 7 7 7 Ø d 2.5 2.5 2.5 2.5 Conductor mm² min Conductor mm² max 10 10 10 10 Connector with Cable Gland 81

Notes: 82

Chemical and Heavy Industry Refrigerated (Reefer) Container Plugs and Sockets Harbour installation containers, ship yards and shipping lines Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 83

Refrigerated (Reefer) Container Plugs and Sockets All seals are resistant to deformation even under high pressure loading (good rebound resilience) No internal strain relief any longer, as this is integrated in the Multi-Grip cable gland Bayonet system in conjunction with sealing cap offers additional protection against saline sea air and the penetration of sea water All the materials used are particularly resistant to sea water Easy to view status of RCD and / or MCB through transparent flip-open windows RCD and / or MCB s are easy to operate, by simply opening and closing the flip-open window Switch can be triplelocked in 0 position with a padlock Special combination in special steel housing for a refrigerated container ship of a leading shipping line Safe, Robust, Easy to Install 8

The certificates from international testing authorities confirm the high quality standard of the plug-type devices Lloyd s Register, Bureau Veritas and others approved. CEE Norm U.K. Reefer Container Equipment is used at seaports and container terminals all over the world and on many ships. Multi-socket outlet units are available on a Made to Order basis. Please enquire for further details. 85

A CURRENT V VOLTAGE Hz FREQUENCY 3P+E EARTH HR. POS Container Plugs & Sockets 0 1155 3 Surface Mounting Nickel plated contacts 0 13021 3 Panel Mounting Nickel plated contacts Flange 75 x 75mm Fixing centres: 0 x 0mm 0 2185 3 0 3123 3 0 27027 3 Plug with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket Nickel plated contacts Connector with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket Nickel plated contacts Panel Mounting Appliance Inlet Nickel plated contacts Flange 85 x 85mm Fixing centres: 70 x 70mm 0 1050 3 Switched with mechanical double interlocking Nickel plated contacts 0 1702 3 Switched with mechanical double interlocking Also available with RCD fitted / pre-wired 88010 or with RCD+MCB 88011. Nickel plated contacts To accept RCD/MCB 8

Dimensions 87

Notes: 88

Chemical and Heavy Industry Special Purpose Products Harbour installation containers, ship yards and shipping lines Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties 500V & High Frequency page 2 DC Current page 3 7 Pole page Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 8

Special Purpose Products TK-Kombi Compact combination of CEE and SCHUKO socket Fuse protection of the shockproof socket possible Provision with shockproof sockets 1 / 230V in Belgian/French, Danish and Swiss norms also possible DC plug-type devices For testing shops, electroplating plants, rail vehicles and maintenance areas ACS mounted socket Auxiliary contact switch with diverse applications: checking, controlling, regulating, monitoring Additional auxiliary contact switch on mounted sockets (shockproof 1/A CEE socket) closes and / or opens through plug Electrical plug locking possible Potential-free switching Switching element, e.g. contactor, can be set separately Phase sequence indicator tri-pole CEE plug with integrated shockproof socket and built-in electronics enables monitoring of the rotary field, as well as recognition in the event of failure of a phase. Via the shockproof socket, further test devices can be connected, and amongst other things a function test of FI switches can be carried out. Safe, Robust, Easy to Install 0

Conventional Locking PSC Locking PSC - Pilot-Switch Contact Potential-free switching of the built-in auxiliary contact in pilot drilled hole of the socket (3 A and 125 A). Suitable for contactor locking or for additional control purposes. As all sockets are subjected to contact rating testing, they are supplied without pilot contact or PSC contact; if a pilot contact is required, a P is added to the order number. 7-pole plug type devices Clear advantages in the areas of pole-changing / star-delta connection, traffic light switching / regulation / electrical locking / monitoring / acknowledgement / notification Pole changing With RC motors Dahlander circuit, 1 rotary direction, 2 speeds 1

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS 500V Black & 100-300 Hz / 301-500 Hz Green Equipment 1 500 >50 >50 >50 >50 100-300 301-500 100-300 301-500 3 11 117 118 111 1120 1121 7 10 2 7 10 2 500 1128 7 1 500 >50 >50 >50 >50 100-300 301-500 100-300 301-500 3 1222 1223 122 123 1235 123 7 10 2 7 10 2 500 120 7 1 500 >50 >50 >50 >50 100-300 301-500 100-300 301-500 3 15 1 17 13012 13013 1301 7 10 2 7 10 2 500 1301 7 1 500 >50 >50 >50 >50 100-300 301-500 100-300 301-500 3 210 211 212 2173 217 2175 7 10 2 7 10 2 500 2183 7 Surface Mounting Panel Mounting Angled Panel Mounting Straight Surface Mounting Appliance Inlet 1 500 >50 >50 >50 >50 100-300 301-500 100-300 301-500 3 2131 21 2133 213 21 215 7 10 2 7 10 2 500 2152 7 1 500 >50 >50 >50 >50 100-300 301-500 100-300 301-500 3 3131 31 3133 313 31 315 7 10 2 7 10 2 500 3152 7 3A with screw / clamp terminals and pilot contact Note: This pilot contact should NOT be counted as a main pin Plug with Multi-Grip Cable Gland Screwless terminals -point (quarter turn) locking system Multi-Grip cable gland system with moulded-in gasket Conector with Multi-Grip Cable Gland Screwless terminals -point (quarter turn) locking system Multi-Grip cable gland system with moulded-in gasket 2 The range of QUICK-CONNECT products are shown on pages 1-73

A CURRENT V VOLTAGE Hz FREQUENCY 2P+E EARTH HR. POS DC Plugs & Sockets 1 > 50-250 07 > 50-250 11275 3 3 Surface Mounting 1 > 50-250 2 > 50-250 11127 3 3 IP Shown As above but 1 > 50-250 121 > 50-250 1217 3 3 Panel Mounting Angled 1* > 50-250 1302 1 > 50-250 13070 > 50-250 1303 * Flange 2 x 2mm Flange 75 x 75mm 3 3 3 Panel Mounting 1 > 50-250 10 > 50-250 1317 3 3 As above but 1 > 50-250 2188 > 50-250 218 3 3 Plug 1 > 50-250 2152 > 50-250 21817 3 3 IP Shown As above but 1 > 50-250 3177 > 50-250 3178 3 3 Connector 1 > 50-250 315 > 50-250 317 3 3 IP Shown As above but Switched Interlock Socket 1 > 50-250 1 > 50-250 150 3 3 Switched with mechanical double interlock 3

A CURRENT V VOLTAGE Hz FREQUENCY P+E EARTH HR. POS 7 Pole Plugs & Sockets 1 1 20 20 15 15 1180 1182 1181 1183 Surface Mounting 1 1 20 20 15 15 13 138 137 13 Panel Mounting 1 1 20 20 15 15 210550 2103 21557 21007 Plug TE-Plus with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket 1 1 20 20 15 15 310311 310381 31752 310123 Connector with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket 1 1 20 20 15 15 213 215 21 21 Surface Mounting Appliance Inlet 1 1 20 20 15 15 15 1 1378 1038 Surface Mounting Switched Interlocked 1 1 20 20 15 15 2181 2183 2180 2182 Special Plugs for Earth Monitoring Pin (with 2 Shortened Pins) + E

Dimensions Amperes 1 Poles 7 7 a 83 83 b 12 12 c 155 155 d 130 13 e 8 8 f 11 11 Ø h 5.5 5.5 i.5.5 Ø k 12 12 l 5 5 m 80 80 Ø n 10 10 o M25 M25 p 2x M25 2x M25 Conductor mm² min 1.5 2.5 Conductor mm² max 10 Amperes 1 Poles 7 7 a 75 75 b 75 75 c 0 0 d 0 0 Ø e 5.5 5.5 f 7 8 h 35.5 50 i 53 2 k 85 8 Ø l 55 0 m 11.5 17 Conductor mm² min 1.5 2.5 Conductor mm² max 10 Amperes 1 Poles 7 7 Ø a 5 72 b 7 117 c 152 181 d 11 135.5 Ø e 21 27 Conductor mm² min 1 2.5 Conductor mm² max 2.5 Amperes 1 Poles 7 7 Ø a 5 72 b 18 18 c 8 Ø d 21 27 Conductor mm² min 1 2.5 Conductor mm² max 2.5 Surface Mounting Panel Mounting Plug TE-Plus with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket Connector with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket Amperes 1 Poles 7 7 a 83 83 b 12 12 c 155.5 1 d 122 130 e 8 8 f 11 11 Ø h 5.5 5.5 i.5.5 Ø k 12 12 l 5 5 m 80 80 Ø n 10 10 p M25 M25 r 2x M25 2x M25 Conductor mm² min 1 2.5 Conductor mm² max 2.5 Amperes 1 Poles 7 7 a 118 10 b 225 20 c 101 10 d 208 20 e 13 18 f 22 302 Ø g.5 8.1 h 8 10 i 2x M25 1x M0 k 2x M25 1x M/M0 Amperes 1 Poles 7 7 Ø a 5 72 b 7 117 c 152 181 d 11 135.5 Ø e 21 27 Conductor mm² min 1 2.5 Conductor mm² max 2.5 Surface Mounting Appliance Inlet Surface Mounting Switched Interlocked Special Plugs for Earth Monitoring Pin (with 2 Shortened Pins) + E 5

A CURRENT V VOLTAGE Hz FREQUENCY P+E EARTH HR. POS 7 Pole Plugs & Sockets 1 1 20 20 15 15 113 1135 1152 11578 Surface Mounting 1 1 20 20 15 15 13330 133 13331 13333 Panel Mounting 1 1 20 20 15 15 21711 21712 217 21 Plug with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket 1 1 20 20 15 15 31512 3151 31513 31515 Connector with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket 1 1 20 20 15 15 230 253 Surface Mounting Appliance Inlet 1 1 20 20 15 15 17 18 1380 10087 Surface Mounting Switched Interlocked 1 1 20 20 15 15 21823 21811 21818 2100 Special Plugs for Earth Monitoring Pin (with 2 Shortened Pins) + E

Dimensions Amperes 1 Poles 7 7 a 0 118 b 170 225 c 77 101 d 137.5 1208 e 122 1 f 15 255 g.5.5 Ø h 5.5 8 i M20 2x M25 k M20 / 25 2x M25 Conductor mm² min 1.5 2.5 Conductor mm² max 10 Amperes 1 Poles 7 7 a 75 75 b 75 75 c 0 0 d 0 0 Ø e 5.5 5.5 f 7 8 h 35.5 50 i 57 5 k 3 10 Ø l 55 0 m 11.5 17 Conductor mm² min 1.5 2.5 Conductor mm² max 10 Amperes 1 Poles 7 7 Ø a 8 101 b 7 117 c 152 181 d 11 138.5 Ø e 21 27 Conductor mm² min 1 2.5 Conductor mm² max 2.5 Surface Mounting Panel Mounting Plug with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket Amperes 1 Poles 7 7 Ø a 8.5 101.5 b 18 200 c 3 107 Ø d 21 27 Conductor mm² min 1 2.5 Conductor mm² max 2.5 Connector with Multi-Grip Cable Gland Multi-Grip cable gland system with moulded-in gasket Amperes 1 Poles 7 7 a 8 0 b 8 75 c 13 13 d 123 ef Ø h i k l 111 m 78 n 5 Ø o 5.5 5.5 p r M20 M25 Ø s 23 2 t Amperes 1 Poles 7 7 a 118 10 b 225 20 c 101 10 d 208 20 e 13 15 f 25 30 Ø g.5 8.1 h 8 10 i 2x M25 1x M0 k 2x M25 1x M/M0 Amperes 1 Poles 7 7 Ø a 8 101 b 7 117 c 152 181 d 11 138.5 Ø e 21 27 Conductor mm² min 1 2.5 Conductor mm² max 2.5 Surface Mounting Appliance Inlet Surface Mounting Switched Interlocked Special Plugs for Earth Monitoring Pin (with 2 Shortened Pins) + E 7

Notes: 8

Chemical and Heavy Industry Harbour installation containers, ship yards and shipping lines Phase Inverters Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events

Phase Inverters Offers an ingenious solution to change the direction of AC electric motor rotation Change of rotary field is possible using a simple screwdriver Available in IP or IP7 Unique cable gland system with moulded-in gasket Adapts easily to all common cable types and diameters Cable is securely fastened and tight Inspection of cable gland system from the outside without the need of opening the plug Safe, Robust, Easy to Install 100

Phase inverter in 1A and A 5-pole design Wide range for the most diverse application conditions IP splashproof design IP7 watertight design All pins brass-nickel-plated Additional water protection through separate sealing cap See page 52 for details 101

A CURRENT V VOLTAGE Hz FREQUENCY 3P+E EARTH HR. POS 3P+N+E EARTH HR. POS Phase Inverters 1 20 22052 15 20 15 22053 2205 22055 Phase Inverter Plug with Multi-Grip Cable Gland The range of QUICK-CONNECT products are shown on pages 1-73 Screwless terminals -point (quarter turn) locking system Multi-Grip cable gland system with moulded-in gasket 1 20 22 15 20 15 225 22 227 Phase Inverter Plug with Multi-Grip Cable Gland The range of QUICK-CONNECT products are shown on pages 1-73 Screwless terminals -point (quarter turn) locking system Multi-Grip cable gland system with moulded-in gasket 1 20 15 20 15 22 2251 227 2252 Phase Inverter Plug with Multi-Grip Cable Gland 1 20 15 20 15 2208 220 2210 2211 Phase Inverter Surface Mounting Appliance inlet The phase-inverter offers an ingenious solution to change the direction of rotation of three phase alternating current motors. Two phase pins are mounted on a turntable plate, which can be unlocked and turned through 180 left or right using a simple screwdriver. Only one movement is necessary to turn the motor direction without changing the cable connections. 102

Dimensions Amperes 1 Poles 5 5 Ø a 0 7.5 7.5 b 100.5 103 121 121.5 c 11 12 17 17.5 d 10.5 105.5 128 128.5 Ø e 18 18 23 23 f.5 70.5 78 80 Conductor mm² min 1 1 2.5 2.5 Conductor mm² max 2.5 2.5 Phase Inverter Plug with Multi-Grip Cable Gland Screwless terminals -point (quarter turn) locking system Multi-Grip cable gland system with moulded-in gasket Amperes 1 Poles 5 5 Ø a 0 7.5 7.5 b 100.5 103 121 121.5 c 11 12 17 17.5 d 10.5 105.5 128 128.5 Ø e 18 18 23 23 f.5 70.5 78 80 Conductor mm² min 1 1 2.5 2.5 Conductor mm² max 2.5 2.5 Phase Inverter Plug with Multi-Grip Cable Gland Screwless terminals -point (quarter turn) locking system Multi-Grip cable gland system with moulded-in gasket Amperes 1 Poles 5 5 Ø a 8 101 b 7 117 c 152 181 d 11 138.5 Ø e 21 27 Conductor mm² min 1 2.5 Conductor mm² max 2.5 Amperes 1 Poles 5 a 5 b 11 c 75 d Ø e 5.1 f h 135 i 100 k - Conductor mm² min 1 Conductor mm² max 2.5 Amperes Poles 5 a 83 b 12 c 1 d 130 e 8 f 11 Ø h 5.5 i.5 Ø k 12 l 5 m 80 Ø n 10 p M25 r 2x M25 Conductor mm² min 2.5 Conductor mm² max Phase Inverter Plug with Multi-Grip Cable Gland Surface Mounting Appliance Inlet Surface Mounting Appliance Inlet 103

Notes: 10

Chemical and Heavy Industry Harbour installation containers, ship yards and shipping lines Schuko Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 105

Schuko Plugs and Sockets Ergonomic shape ensures a good grip and simple handling Schuko equipment conforms to VDE 020 European Standards Optionally available with cap on tab or flip-cap as special order Good connection facility through halfshell design All screws with combination head All screws can be operated from one direction Supplied with contacts open Variable connection options (rear and side) IP (or IP7 to order) SCHUKO connector plug-type devices also available in Belgian / French system Safe, Robust, Easy to Install 10

Schuko Plugs and Sockets The SCHUKO system available at 1A 230-250V is widely used on the European continent both in industrial and domestic areas. There are however two versions available, the more common German system and also the Belgian-French system. The main characteristics are that the German system has 2 pins and scraping earth contacts on the plug and 2 receptacle holes and scraping earth contacts on the socket. Whereas the Belgian-French system has 2 pins and 1 receptacle earth hole on the plug, 2 receptacle holes and 1 pin on the socket. *Within our range we offer a plug with dual facilities which will safely operate with both types of socket. The below items are based on the German system unless specified A CURRENT V VOLTAGE Colour Part No. 1 250 Blue 7130 250 Grey 71 250 Black 713 1 250 Blue 713 1 250 Blue 713 250 Grey 712 250 Black 71 Panel socket with lid Panel socket with lid Panel socket with lid Panel socket with lid Belgian - French System Panel socket without lid Panel socket without lid Panel socket without lid 1 250 250 Blue Grey 7302 7303 Plug (plastic) dual system Plug (plastic) dual system 1 250 Blue 70 250 Grey 710 250 Blue 715 Connector (plastic) Connector (plastic) Connector Belgian - French 1 250 250 Black Black 7312 70 Plug (butyl rubber) dual system Connector (butyl rubber) 107

Combination Units This section covers pre-wired combination units 1A - 125A unswitched or switch-interlocked with RCD and / or MCB protection. Multi-outlet unswitched sockets with RCD and / or MCB protection. Single and multi-outlet sockets without facility for integral protection. Earth monitoring - continuity sensing socket outlets. The applications for these products in industrial environments is endless, with CEE Norm U.K. Ltd already having supplied both standard and Made to Order units to many household name companies. Should you require any help finding the most suitable product for your application, please contact our sales office. 108

Chemical and Heavy Industry Harbour installation containers, ship yards and shipping lines Combination Units Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Pre-Wired (1, & 3A) Page 11 Multi-Outlet Page 11 Switch-Interlocked (1, & 3A) Page 118 Pre-Wired (125A) Page 120 Switch-Interlocked (125A) Page 121 Single Page 122 Multi-Outlet Socket Units Page 123 Heavy Duty Rubber In-Line Page 125 Multi-Outlet Distribution Units Page 12 Earth Monitoring Units Page 127 Made To Order Units Page 128 Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 10

Combination Units Custom built and bespoke electrical distribution boards designed and manufactured by CEE Norm U.K. With over 0 years experience in the design of purpose built distribution boards, which can be manufactured in thermoplastic, rubber and steel fabrication, our equipment is installed in industries as diverse as: Camping and caravan parks as well as marina boat yards for leisure use Motor car manufacturing with major manufacturers throughout the UK and Europe International ship builders and repair yards providing welding repairs for offshore facilities Film, TV and outdoor events Our RCD earth leakage and earth monitoring units are used in food processing, pharmaceutical industries and by all major utility companies and authorities for electricity, gas and water. Established electrical contractors such as N.G. Bailey, B.K.I., Crown House, T. Clarke, Dodds Electrical, Wysepower and Aggreko all value the expertise of CEE Norm U.K. in the design of electrical distribution equipment. CEE Norm U.K. plug and socket distribution systems have been used in the 200 Athens Olympics, the Manchester Commonwealth Games and the Open Golf Championship. Wherever speed of installation is required, our products can be found giving both the distributor and end users confidence in both the supply and safety of the equipment being used. Typical examples of the diverse range of equipment that can be supplied are indicated, together with the industry involved. Please contact CEE Norm U.K. direct if you have specific requirements for purpose-designed distribution equipment. Free standing rubber distribution unit complete with input lead phase inverter (3 phase) and RCD / MCB protection. Heavy duty steel bollard for street market / marina applications complete with RCD s / MCB s and socket outlets. Hanging distribution unit A 3 phase complete with inlet plug and 3 sockets plus air line attachment. Wall mounting rubber combination socket / distribution unit with 15V and 20V sockets plus RCD and MCB. Safe, Robust, Easy to Install

Free standing rubber combination unit with incoming appliance inlets and cable storage. Multiple sockets can be provided in 15V / 20V supplies with RCD / RCBO / MCB protection. Accident, emergency and disaster control Fully weatherproof free standing distribution unit in rubber complete with input lead available in 15V, 20V and V with RCD / MCB protection. For use by fire services and military applications. Building and construction industry Wall mounting socket outlet combination units in fully weatherproof thermoplastic. Rated from 1A to 125A 00V complete with RCD and MCB protection and switched interlocked with padlockable switches. Quarrying and minerals extraction 111

Combined power and TV / satellite hook-up units. Dual voltage hanging distribution units 15V / 20V in thermoplastic IP55. Motor industry Free standing distribution pillar in powder coated sheet steel, dual voltage 15V / 20V / V with airline. Camping, caravanning and leisure industries Full range of distribution units, complete with galvanised metal ground stakes are available from 1 way 1A 20V with RCD/MCB protection. Metering facilities and multi-outlets up to 12 ways can also be manufactured. Free standing distribution feeder pillars supplied in heavy duty powder coated paint or galvanised finishes. Transport, storage, distribution and logistics 112

Food processing and packaging Mining and tunnelling Heavy duty rubber dual voltage 15V / 220V hanging distribution unit with 15V and 220V sockets and air line attachment. Heavy duty rubber wall mounting distribution unit fitted with RCD / MCB s and 15V/220V sockets. IP7 watertight thermoplastic wall mounting combination unit with RCD / MCB s and input terminals. Chemical and heavy industry Harbour installation containers, ship yards and shipping lines Stainless steel IP7 rated lockable enclosure / distribution board with facility to lock door with plugs in situ. For use on 0V 3H A container / refrigerated supplies. 113

Pre-Wired Combination Units Unswitched RCD Protected Sockets Unswitched internally pre-wired units are supplied with RCD (for earth fault protection) with sensitivity of 30MA / 30MS as standard (others available upon request) 1A Socket = 25A RCD A Socket = 0A RCD 3A Socket = 3A RCD Sockets available at IP or IP7 3 Poles One IP Protected by 1x 30MA RCD 3 Poles One IP Protected by 1x 30MA RCD 1A 20 2P+E 88011 1A 2P+E 8801 A 3A 20 20 2P+E 2P+E 880120 88012 A 3A 2P+E 2P+E 88020 8802 One IP7 Protected by 1x 30MA RCD One IP7 Protected by 1x 30MA RCD 1A 20 2P+E 88051 1A 2P+E 88050 20V 2P+E A 3A 20 20 2P+E 2P+E 880520 88052 V 2P+E A 3A 2P+E 2P+E 88052 88055 Poles One IP Protected by 1x 30MA RCD 5 Poles One IP Protected by 1x 30MA RCD 1A 15 3P+E 880128 1A 15 3P+N+E 88010 A 3A 15 15 3P+E 3P+E 8801 88013 A 3A 15 15 3P+N+E 3P+N+E 8801 88018 One IP7 Protected by 1x 30MA RCD One IP7 Protected by 1x 30MA RCD 1A 15 3P+E 880528 1A 15 3P+N+E 88050 15V 3P+E A 3A 15 15 3P+E 3P+E 8805 88053 15V 3P+N+E A 3A 15 15 3P+N+E 3P+N+E 8805 88058 Illustrations show IP Amperes 1 3 Poles 3 5 3 5 3 5 a 13 222 222 222 222 222 222 222 222 b 280 28 28 28 28 28 370 370 370 c 12 20 20 20 20 20 top 18 18 18 c btm 178 178 178 d 23 27 27 27 27 27 303 303 303 e 155 10 10 18 18 18 200 200 200 f 130 123 123 123 123 123 135 135 135 g Units rated at 125A also available 11

Pre-Wired Combination Units Unswitched s Protected by Both RCD & MCB These units are supplied with both RCD (earth fault protection) and MCB (overcurrent protection). Units are supplied with C type MCB s as standard. Socket Rating RCD Rating & Tripping MCB Rating 1 Amps 25 Amps 30MA 1 Amps Amps 0 Amps 30MA Amps 3 Amps 3 Amps 30MA 3 Amps Note: 1A & A units can be supplied with an RCBO (Earth Fault & Overcurrent Protection) in same module. Please ask for details. Sockets available at IP or IP7 3 Poles One IP Protected by 1x RCD & 1x MCB 3 Poles One IP Protected by 1x RCD & 1x MCB 1A 20 2P+E 880117 1A 2P+E 88017 A 3A 20 20 2P+E 2P+E 880121 880125 A 3A 2P+E 2P+E 88021 88025 One IP7 Protected by 1x RCD & 1x MCB One IP7 Protected by 1x RCD & 1x MCB 1A 20 2P+E 880517 1A 2P+E 88051 20V 2P+E A 3A 20 20 2P+E 2P+E 880521 880525 V 2P+E A 3A 2P+E 2P+E 88053 8805 Poles One IP Protected by 1x RCD & 1x MCB 5 Poles One IP Protected by 1x RCD & 1x MCB 1A 15 3P+E 88012 1A 15 3P+N+E 88011 A 3A 15 15 3P+E 3P+E 880133 880137 A 3A 15 15 3P+N+E 3P+N+E 88015 8801 One IP7 Protected by 1x RCD & 1x MCB One IP7 Protected by 1x RCD & 1x MCB 1A 15 3P+E 88052 1A 15 3P+N+E 88051 15V 3P+E A 3A 15 15 3P+E 3P+E 880533 880537 15V 3P+N+E A 3A 15 15 3P+N+E 3P+N+E 88055 8805 Illustrations show IP Amperes 1 3 Poles 3 5 3 5 3 5 a 13 222 222 222 222 222 222 222 222 b 280 28 28 28 28 28 370 370 370 c 12 20 20 20 20 20 top 18 18 18 c btm 178 178 178 d 23 27 27 27 27 27 303 303 303 e 155 10 10 18 18 18 200 200 200 f 130 123 123 123 123 123 135 135 135 g Units rated at 125A also available 115

Pre-Wired Combination Units 2 Gang Unswitched RCD Protected Sockets Unswitched internally pre-wired units are supplied with RCD (for earth fault protection) with sensitivity of 30MA / 30MS as standard (others available upon request) 2x 1A Sockets = 0A RCD 2x A Sockets = 3A RCD Sockets available at IP or IP7 3 Poles Two s IP Protected by 1x RCD 3 Poles Two s IP Protected by 1x RCD 1A 20 2P+E 88221 A 20 2P+E 881 1A 2P+E 88221 A 2P+E 881 Two s IP7 Protected by 1x RCD Two s IP7 Protected by 1x RCD 1A 20 2P+E 88271 A 20 2P+E 8827 1A 2P+E 88271 A 2P+E 882733 20V 2P+E V 2P+E Poles Two s IP Protected by 1x RCD 5 Poles Two s IP Protected by 1x RCD 1A 15 3P+E 88231 A 15 3P+E 8823 1A 15 3P+N+E 8821 A 15 3P+N+E 882 Two s IP7 Protected by 1x RCD Two s IP7 Protected by 1x RCD 1A 15 3P+E 88271 A 15 3P+E 88273 1A 15 3P+N+E 882751 A 15 3P+N+E 882753 15V 3P+E 15V 3P+N+E Illustrations show IP Amperes 1 Poles 3 5 3 5 a 222 222 222 222 222 222 b 28 28 28 28 28 28 c 20 20 20 20 20 20 d 27 27 27 27 27 27 e 155 10 10 18 18 18 f 123 123 123 123 123 123 g Units with 2x RCD or MCB available on request 11

Multi-Outlet Combination Units Unswitched internally pre-wired units are supplied with RCD (for earth fault protection) with sensitivity of 30MA / 30MS as standard (others available upon request) All units are IP splashproof (watertight IP7 or MCB / overcurrent protection available on request) 3 Gang Gang 3x 1A Sockets Protected by 1x 0A RCDs 3x A Sockets Protected by 1x 80A RCDs 3 Gang Units Fitted with RCD 30MA x1 Amperes 1 A CURRENT V VOLTAGE 2P+E 3P+E P+E Poles 3 5 3 5 a 222 222 222 222 222 222 1 20 15 20 88331 88331 88333 88333 88315 15 88335 883515 88355 b 370 370 370 370 370 370 c 200 205 208 210 210 210 d 135 135 135 135 135 135 x 1A Sockets Protected by 2x 0A RCDs x A Sockets Protected by 2x 3A RCDs Gang Units Fitted with RCD 30MA x2 Amperes 1 A CURRENT V VOLTAGE 2P+E 3P+E P+E Poles 3 5 3 5 a 222 222 222 222 222 222 1 20 15 20 8831 8831 8833 8833 8815 15 8835 88515 8855 b 370 370 370 370 370 370 c 200 205 208 210 210 210 d 135 135 135 135 135 135 117

Switch-Interlocked Combination Units Switch-Interlocked RCD Protected Sockets Switched and interlocked units incorporate a mechanical interlock mechanism which prevents the switch from being turned ON until the plug is fully inserted. The plug cannot be withdrawn until the switch is turned to the OFF position. The switch can be padlocked in the OFF position. Units are supplied with RCD (for earth fault protection) with sensitivity of 30MA/30MS as standard (others available upon request). ALL UNITS ARE INTERNALLY PRE-WIRED. 1A Socket = 25A RCD A Socket = 0A RCD 3A Socket = 3A RCD Sockets available at IP or IP7 3 Poles One Switched Interlocked Socket IP Protected by 1x 30MA RCD 3 Poles One Switched Interlocked Socket IP Protected by 1x 30MA RCD 1A 20 2P+E 8808 1A 2P+E 880 A 20 2P+E 88050 A 2P+E 8808 3A 20 2P+E 88052 3A 2P+E 88070 One Switched Interlocked Socket IP7 Protected by 1x 30MA RCD One Switched Interlocked Socket IP7 Protected by 1x 30MA RCD 1A 20 2P+E 880118 1A 2P+E 88018 A 20 2P+E 880122 A 2P+E 88022 20V 2P+E 3A 20 2P+E 88012 V 2P+E 3A 2P+E 8802 Poles One Switched Interlocked Socket IP Protected by 1x 30MA RCD 5 Poles One Switched Interlocked Socket IP Protected by 1x 30MA RCD 1A 15 3P+E 8805 1A 15 3P+N+E 8800 A 15 3P+E 8805 A 15 3P+N+E 8802 3A 15 3P+E 88058 3A 15 3P+N+E 880 One Switched Interlocked Socket IP Protected by 1x 30MA RCD One Switched Interlocked Socket IP7 Protected by 1x 30MA RCD 1A 15 3P+E 880130 1A 15 3P+N+E 88012 A 15 3P+E 88013 A 15 3P+N+E 8801 15V 3P+E 3A 15 3P+E 880138 15V 3P+N+E 3A 15 3P+N+E 880150 Illustrations show IP7 Amperes 1 3 Poles 3 5 3 5 3 5 a 13 13 13 13 13 13 180 180 180 b 35 35 35 35 35 35 0 0 0 c 117 117 117 117 117 117 10 10 10 d 38 38 38 38 38 38 0 0 0 e 13 13 13 152 152 158 11 11 11 f 38 38 38 3 3 3 500 500 500 g.5.5.5.5.5.5 8 8 8 h 8 8 8 8 8 8.5.5.5 Cable Entry M25 M25 M25 M25 M25 M25 M M M One top and two bottom cable entries in size indicated above Units rated at 125A also available 118

Switch-Interlocked Combination Units Switch-Interlocked Sockets Protected by Both RCD & MCB These units are supplied with both RCD (earth fault protection) and MCB (overcurrent protection). Units are supplied with C type MCB s as standard. ALL UNITS ARE INTERNALLY PRE-WIRED. Socket Rating RCD Rating & Tripping MCB Rating 1 Amps 25 Amps 30MA 1 Amps Amps 0 Amps 30MA Amps 3 Amps 3 Amps 30MA 3 Amps Note: 1A & A units can be supplied with an RCBO (Earth Fault & Overcurrent Protection) in same module. Please ask for details. Sockets available at IP or IP7 3 Poles One Switched Interlocked Socket IP Protected by 1x 30MA RCD & 1x MCB 3 Poles One Switched Interlocked Socket IP Protected by 1x 30MA RCD & 1x MCB 1A 20 2P+E 880 1A 2P+E 8807 A 20 2P+E 88051 A 2P+E 880 3A 20 2P+E 88053 3A 2P+E 88071 One Switched Interlocked Socket IP7 Protected by 1x 30MA RCD & 1x MCB One Switched Interlocked Socket IP7 Protected by 1x 30MA RCD & 1x MCB 1A 20 2P+E 88011 1A 2P+E 8801 A 20 2P+E 880123 A 2P+E 88023 20V 2P+E 3A 20 2P+E 880127 V 2P+E 3A 2P+E 88027 Poles One Switched Interlocked Socket IP Protected by 1x 30MA RCD & 1x MCB 5 Poles One Switched Interlocked Socket IP Protected by 1x 30MA RCD & 1x MCB 1A 15 3P+E 88055 1A 15 3P+N+E 8801 A 15 3P+E 88057 A 15 3P+N+E 8803 3A 15 3P+E 8805 3A 15 3P+N+E 8805 One Switched Interlocked Socket IP7 Protected by 1x 30MA RCD & 1x MCB One Switched Interlocked Socket IP7 Protected by 1x 30MA RCD & 1x MCB 1A 15 3P+E 880131 1A 15 3P+N+E 88013 A 15 3P+E 880135 A 15 3P+N+E 88017 15V 3P+E 3A 15 3P+E 88013 15V 3P+N+E 3A 15 3P+N+E 880151 Illustrations show IP7 Amperes 1 3 Poles 3 5 3 5 3 5 a 13 13 13 13 13 13 180 180 180 b 35 35 35 35 35 35 0 0 0 c 117 117 117 117 117 117 10 10 10 d 38 38 38 38 38 38 0 0 0 e 13 13 13 152 152 158 11 11 11 f 38 38 38 3 3 3 500 500 500 g.5.5.5.5.5.5 8 8 8 h 8 8 8 8 8 8.5.5.5 Cable Entry M25 M25 M25 M25 M25 M25 M M M One top and two bottom cable entries in size indicated above Units rated at 125A also available 11

Pre-Wired Combination Units 125A Unswitched RCD Protected Sockets Unswitched internally pre-wired units are supplied with RCD (for earth fault protection) with sensitivity of 30MA / 30MS as standard (others available upon request) All 125A Units are IP7 Unswitched IP7 Protected by 100A DP RCD 125A 20 2P+E Unswitched socket 880 Unswitched IP7 Protected by 125A DP RCD 125A 20 2P+E Unswitched socket 8803 Unswitched IP7 Protected by 100A P RCD 125A 15 3P+E Unswitched socket 8803 Unswitched IP7 Protected by 125A P RCD 125A 15 3P+E Unswitched socket 88038 Unswitched IP7 Protected by 100A P RCD 125A 15 3P+N+E Unswitched socket 8800 Unswitched IP7 Protected by 125A P RCD 125A 15 3P+N+E Unswitched socket 8802 * Depth without socket - add 70-0mm depending on socket 120

Switch-Interlocked Combination Units 125A Switched-Interlocked RCD Protected Sockets Switched and interlocked units incorporate a mechanical interlock mechanism which prevents the switch from being turned ON until the plug is fully inserted. The plug cannot be withdrawn until the switch is turned to the OFF position. The switch can be padlocked in the OFF position. Units are supplied with RCD (for earth fault protection) with sensitivity of 30MA / 30MS as standard (others available upon request). All 125A Units are IP7 Switch Interlocked Socket IP7 Protected by 100A DP RCD 125A 20 2P+E Switch interlocked socket 88002 Switch Interlocked Socket IP7 Protected by 125A DP RCD 125A 20 2P+E Switch interlocked socket 8800 Switch Interlocked Socket IP7 Protected by 100A P RCD 125A 15 3P+E Switch interlocked socket 8800 Switch Interlocked Socket IP7 Protected by 125A P RCD 125A 15 3P+E Switch interlocked socket 88008 Switch Interlocked Socket IP7 Protected by 100A P RCD 125A 15 3P+N+E Switch interlocked socket 88010 Switch Interlocked Socket IP7 Protected by 125A P RCD 125A 15 3P+N+E Switch interlocked socket 88012 Double enclosure switch interlocked units incorporate all the features of the above PLUS the added benefit of 70mm² terminals and more space for incoming cable terminating. Cable entries: Top M0 Bottom M0 / 50 Switch Interlocked Double Enclosure Socket IP7 Protected by 125A P RCD 125A 15 3P+E Switched interlocked double enclosure socket 88125 125A 15 3P+N+E Switched interlocked double enclosure socket 885125 121

Single on Back Box CEE Norm U.K. offer a range of single panel sockets, either angled or straight, splashproof (IP) or watertight (IP7) fitted to a plastic back box, internally pre-wired. A 1 1 1 1 V 20 15 15 3P 3P P 5P Angled socket IP on back box Angled socket IP on back box Angled socket IP on back box Angled socket IP on back box Part No. 5310 5310 531 5315 IP 112mm x 112mm x 120mm A 1 1 1 1 V 20 15 15 3P 3P P 5P Angled socket IP7 on back box Angled socket IP7 on back box Angled socket IP7 on back box Angled socket IP7 on back box Part No. 5310/WT 5310/WT 531/WT 5315/WT IP7 mm x mm x 150mm Part No. Back box 75 x 75 x 50mm to suit Cee Norm panel sockets with 75 x 75mm flange / 0 x 0mm fixings e.g. 1A 3 pin up to A 5 pin straight panel sockets 10010 A V 20 15 15 3P 3P P 5P Angled socket IP on back box Angled socket IP on back box Angled socket IP on back box Angled socket IP on back box Part No. 5313 5313 5318 53158 IP 15mm x 120mm x 15mm A V 20 15 15 3P 3P P 5P Angled socket IP7 on back box Angled socket IP7 on back box Angled socket IP7 on back box Angled socket IP7 on back box Part No. 5313/WT 5313/WT 5318/WT 53158/WT IP7 180mm x mm x 10mm All back boxes are supplied undrilled for cable entry unless otherwise requested. 122

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Multi-Outlet Socket Units 1 20 15 20 15 50 51 572 573 570 57 571 575 2 Gang Surface Mounting Pre-wired Amperes 1 Poles 3 5 3 5 a 180 180 180 180 180 180 b 105 105 105 105 105 105 c 10 10 10 10 10 10 d 80 80 80 80 80 80 Enclosure normally for straight sockets Amperes 1 Poles 3 5 3 5 a 15 25 25 25 25 25 b 120 185 185 185 185 185 c 130 155 155 10 10 10 d 78 8 8 8 8 8 With angled sockets 1 20 15 20 15 5330 5331 53372 53373 53370 5337 53371 53375 3 Gang Surface Mounting Pre-wired Amperes 1 Poles 3 5 3 5 a 25 335 335 335 335 335 b 185 25 25 25 25 25 c 150 15 15 15 15 15 d 8 130 130 130 130 130 1 20 15 20 15 530 531 5372 5373 5370 537 5371 5375 Gang Surface Mounting Pre-wired Note: Angled sockets fitted as standard. Straight sockets can be fitted on special request. Amperes 1 Poles 3 5 3 5 a 185 25 25 25 25 25 b 25 335 335 335 335 335 c 150 15 15 15 15 15 d 8 130 130 130 130 130 We reserve the right to change the enclosure sizes. 123

A CURRENT V VOLTAGE Hz FREQUENCY EARTH HR. POS EARTH HR. POS 2P+E 3P+E 3P+N+E EARTH HR. POS Multi-Outlet Socket Units 1 20 15 20 15 50/WT 51/WT 572/WT 573/WT 570/WT 57/WT 571/WT 575/WT 2 Gang Surface Mounting Pre-wired Amperes 1 Poles 3 5 a 180 180 180 b 105 105 105 c 10 10 10 d 80 80 80 With straight sockets Amperes 1 Poles 3 5 3 5 a 180 25 25 25 25 25 b 180 180 180 180 180 c 150 150 150 10 10 10 d 0 0 0 0 0 0 With angled sockets 1 20 15 20 15 5330/WT 5331/WT 53372/WT 53373/WT 53370/WT 5337/WT 53371/WT 53375/WT 3 Gang Surface Mounting Pre-wired Amperes 1 Poles 3 5 3 5 a 25 30 30 30 30 30 b 180 25 25 25 25 25 c 150 170 170 180 180 180 d 0 111 111 111 111 111 1 20 15 20 15 530/WT 531/WT 5372/WT 5373/WT 5370/WT 537/WT 5371/WT 5375/WT Gang Surface Mounting Pre-wired Note: Angled sockets fitted as standard. Straight sockets can be fitted on special request. Amperes 1 Poles 3 5 3 5 a 180 25 15 25 25 25 b 25 30 30 30 30 30 c 150 170 170 180 180 180 d 0 111 111 111 111 111 12 We reserve the right to change the enclosure sizes.

Heavy Duty Rubber In-line Combination Units Type & No. of Sockets A CURRENT V VOLTAGE Hz FREQUENCY Part No. BS133 13A BS33 EARTH HR. POS RCD Rating 30MA 1 13 13 53 3 20 20 5 58 5 5 3 2 2 1x 0A 1x 0A 20 57 20 52 2 1x 25A 20 55 3 1x 0A 550 2 20 551 2 55 3 20 555 3 552 1 1x 0A 20 553 1 1x 0A Rubber enclosure portable or can be wall mounted Amperes 1 Poles 3 5 3 5 Angled sockets fitted as standard a 118 118 118 118 118 118 b 0 0 0 0 0 0 c 122 133 133 1 13 13 d 70 70 70 70 70 70 e 50 50 50 50 50 50 25mm cable entry gland is fitted Straight socket and watertight versions available. Please ask for details. 125

Multi-Outlet Distribution Units Plastic Cross Distribution Unit Metal Cross distribution unit (plastic) - IP - suspendible Appliance inlet and 3 socket outlets A 1 1 1 1 V 20 15 15 2P+E 2P+E 3P+E 3P+N+E Part No. 55 55 5280 5 A V 20 15 15 2P+E 2P+E 3P+E 3P+N+E Part No. 5027 50755 503 557 Rubber distribution outlet unit (free standing). Fitted with various socket outlet combinations at IP or IP7. Fitted with cable entry gland. (input cable and plug available on request), or with appliance inlet. Contact CEE Norm U.K. for your specific requirements. Extension outlet units E.O.U. (metal) IP free standing with cable entry gland, with or without cable. x 1A V 2P+E (without cable) x 1A V 2P+E with 5M 1.5mm² yellow arctic cable and 1A V 2P+E plug Part No. 55501 555015 See also In Line Combination units & Multi-Outlet Socket units & Made to Order units 12

Earth Monitoring Units Earth Monitoring Protection - Earth Continuity Sensing Earth Monitoring Protection equipment is designed to protect personnel from electric shock from portable electrical equipment. Equipment under such protection cannot be switched on before effective earth connection is proved, hence a shock from faulty equipment cannot occur. The earth conductor is continuously monitored. Hence should it become defective whilst an appliance is in operation, the supply will be automatically disconnected. Earth Monitoring Protection will: Eliminate the shock hazard from contact with faulty portable electrical equipment. Reduce the possibility of death or injury resulting from a fall, possibly from a ladder, following even a non-lethal electric shock. Eliminate disconnections on load by providing quality electrical interlocking of plug and socket. Unit with EMU (Earth Monitoring Unit and RCD fitted) IP Socket with Earth Monitoring + RCD Protection A V 3 Wire RCD 1 3 20 20 20 Using P+E Socket Using P+E Socket 2P+E+Pilot 25A 30MA 0A 30MA 3A 30MA Part No. 88721 88723 8872 IP Socket with Earth Monitoring + RCD Protection A V 3 Wire RCD 1 15 Using P+E Socket 15 3 15 A V Using P+E Socket 3P+E+Pilot 25A 30MA 0A 30MA 3A 30MA 3 Wire RCD 1 15 Using P+E Socket 25A 30MA 15 Using P+E Socket 0A 30MA 3 15 P+E+Pilot 3A 30MA Part No. 8871 8873 887 Part No. 88751 88753 8875 Amperes 1 3 Poles 7 7 3 5 a 222 222 27 27 27 b 370 370 50 50 50 c top 18 18 182 182 182 c bottom 178 178 23 23 23 d 303 303 3 3 3 e 10 18 255 255 255 f 135 135 177 177 177 g Units with additional overcurrent (MCB) protection are also available IP7 watertight units also available 127

Made to Order Units CEE Norm U.K. can offer a wide variety of Made to Order units, utilising plastic or rubber surface mounting or portable enclosures fitted with our plugs and sockets and protective devices as required. If your requirement is not covered by the CEE Norm U.K. standard range, please contact our sales office to discuss your requirements. Below are some examples of Made to Order units: Rubber Enclosures Portable rubber distribution unit with multi socket outlets and RCD / MCB protection Portable rubber block with inlet - multi socket outlets and RCD / MCB protection Portable rubber distribution unit with appliance inlet and multi socket outlets RCD/MCB protection and phase indicator neons Available with various socket outlet and RCD / MCB options Note: Made to Order units have to be ordered in writing with full specification. The order may not be cancelled without incurring penalty charges once manufacturing has commenced. 128

Made to Order Units Plastic Enclosures 1A V 3P or 1A 20V 3p RCD or MCB protection Window and Din Rail or 13 module Enclosures with various socket and RCD / MCB options Surface socket with on-off switch 1A 20V 3P socket RCD protected (small vertical enclosure) Surface appliance inlet with on-off switch way socket outlets Multi socket outlet unit on stand Special splitter distribution unit (military version shown) Available with various socket outlet and RCD / MCB options Note: Made to Order units have to be ordered in writing with full specification. The order may not be cancelled without incurring penalty charges once manufacturing has commenced. 12

Notes: 130

Chemical and Heavy Industry Specialist Applications and Accessories Harbour installation containers, ship yards and shipping lines Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Caravan Hook-Up Units & Accessories page 1 Garage Utility Units & Shower Units page 135 Film - TV & Events Distribution Equipment page 13 Window For Enclosures page 138 Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 131

Caravan Hook-Up Units & Accessories CEE Norm U.K. Ltd manufacture a wide range of equipment for distribution of power on caravan parks, campsites and mobile home parks. Whilst some of the CEE Norm U.K. combination units and/or multi-outlet units to standard specification could be used for the above mentioned sites, CEE Norm U.K. have manufactured a range of hook-up units where local power points are required. CEE Norm U.K. standard specifications cover plastic IP55 enclosure with 1, 2, 3 and gang 1A 20V 3P IP socket outlets protected for earth fault and overcurrent protection. IEE wiring regulations 17th edition require that each individual socket outlet is protected for earth fault and overcurrent. For single socket units we fit an RCD (earth fault protection) and MCB (overcurrent protection) although an RCBO can also be fitted. For 2, 3 or gang units, we fit an RCBO (earth fault and overcurrent protection) for each socket. Digital readout meters (kilowatt hour meters) can be incorporated into CEE Norm U.K. hook-up units. The table below lists CEE Norm U.K. standard hook-up units. For special made to order hook-up units or add ons, please refer to the following pages. Standard hook-up units IP55 enclosures / IP sockets 30MA RCDs Part No. A V Socket 2P+E RCD 30MA MCB Reset Window Kilowatt Hour Meter 1mm Terminals as Standard 8811 1 20 1 25A 10A Yes No No 8817 1 20 1 25A 1A Yes No No 8820 1 20 2 2x 10A RCBO Yes No No 882 1 20 2 2x 1A RCBO Yes No No 8830 1 20 3 3x 10A RCBO Yes No No 883 1 20 3 3x 1A RCBO Yes No No 8833 1 20 x 10A RCBO Yes No No 883 1 20 x 1A RCBO Yes No No 880 1 20 1 25A 1A Yes Yes Yes 88 20 1 0A A Yes Yes Yes Part No. 880.1.2 880.1.5 1.2 metre galvanised stake 1.5 metre galvanised stake 1

Caravan Hook-Up Units & Accessories Standard all insulated IP55 plastic enclosures fitted with socket outlet(s) to BS EN 030-2 / BS 33 with RCD s and MCB s behind re-set window and Kilowatt hour meter (where fitted) behind closed window. 1mm² terminals and/or brass gland plates can be requested as an add on. Please contact CEE Norm U.K. sales office for details and costs. The plastic enclosures and brass gland plates (where fitted) are supplied undrilled unless otherwise requested. Typical standard examples of hook-up units. Part No. 8811 8817 Part No. 8820 882 Part No. 8830 883 Part No. 8833 883 Part No. 880 Part No. 880.1.2 880.1.5 1.2 metre galvanised stake 1.2 metre galvanised stake 133

Caravan Hook-Up Units & Accessories Made to Order hook-up units In addition to the range of standard units for caravan, camping and mobile home sites, CEE Norm U.K. offer a Made to Order service where customers requirements extend to different socket layouts, higher IP ratings, different RCD and/or MCB requirements etc. Contact our sales office with your specification. Typical IP7 2 gang unit Caravan Accessories Part No. 25 1A 20V 2P+E Caravan appliance inlet IP Part No. 11 1A 20V 2P+E Padlockable wall socket IP Part No. 21 1A 20V 2P+E Plug which can be padlocked to (padlockable) socket IP Part No. 1200 1A 20V 2P+E Padlockable panel socket IP Other 1A 20V 2P+E equipment (non padlockable) in this catalogue may also be suitable for caravan / camping applications. 13

Garage Utility Units & Shower Units CEE Norm U.K. garage units comprise a quality plastic IP55 enclosure, a 2 pole 30MA RCD and 2 nos. single pole B type MCB, pre-wired ready to wire into RCD. Part No. RCD MCBs GAR 2510 25A 1A+A GAR 010 0A 1A+A GAR 00 0A A+A GAR 01 0A A+1A GAR 000 0A 0A+A Typical garage unit CEE Norm U.K. shower units comprise a quality plastic IP55 enclosure, a 2 pole 30MA RCD and a single pole B type MCB, pre-wired ready to wire into RCD. Part No. SHO 30 SHO 350 RCD 3A 3A MCBs 0A 50A Typical shower unit 135

Film - TV & Events Distribution Equipment CEE Norm U.K. black bodied plugs (line male) and sockets (line female) connectors and female chassis (panel mounting socket) as preferred in the film and TV industry. The front end of plugs and the lid of sockets are colour coded blue for 20V identification. The terminals are screw connect. Part No. A V 21038 1 20 2P+E Plug IP black body with short cable sleeve 31005 1 20 2P+E Connector IP black body with short cable sleeve 13003 1 20 2P+E Panel Socket IP black body 5 x 5mm flange 21 1 20 2P+E Plug IP black body with cable gland 318 1 20 2P+E Connector IP black body with cable gland 2170 20 2P+E Plug IP black body with cable gland 31833 20 2P+E Connector IP black body with cable gland 13

Film - TV & Events Distribution Equipment CEE Norm U.K. rubber distribution units Distro Units are usually Made to Order to customer specifications. With a range of different sized portable rubber enclosures, we can fit our quality male / female connectors with RCD / MCB or RCBO protection if required. From simple units to the more complex 1A - 125A or SOCOPEX etc., please contact our sales office with your requirements. Some typical examples: 137

Window for Enclosures Window with Blanking Strip Cut-outs Click closure Part No. 5881 Module 2 a 55 b 0.5 580 1 7.5 58 127 112.5 5800 8 12 17.5 58018 12 23 220 58027 13 257.5 28.5 Window without Blanking Strip Cut-outs Click closure Part No. Module 5882 2 581 a 55 1 b 37 73 58001 127 10 58010 8 12 1.5 5801 12 23 217 58028 13 257.5 20 Window with Blanking Cut-outs and Din Rail Click closure Part No. Module 5885 2 58 a 55 1 b 0.5 7.5 5800 127 112.5 58013 8 12 17.5 58022 12 23 220 58031 13 257.5 28.5 Lock & 2 keys set Suitable only for the above windows Optional extra in addition to the click closure Part No. 58037 Din screw Suitable only for the above windows Optional extra in addition to the click closure 1 Din screw for 2 module window 2 Din screws for + module windows Part No. 5803 138

Chemical and Heavy Industry Military Applications Harbour installation containers, ship yards and shipping lines Mining and tunnelling Camping and caravanning Building and construction industry Food processing and packaging Agriculture and farming Military applications Industrial and commercial properties Power generation and distribution Oil and gas (non hazardous areas) Film, TV and outdoor events 13

Military Plugs & Sockets Military style Green (RAL 031-FP) IP7 plugs and sockets are available in 1A - 125A in a variety of voltages, with standard earth pin positions to prevent the possibility of connecting items of different voltages or frequencies by mistake. Explanations concerning the standard In order to obtain CEE plug-type devices that meet the requirements of the military sector, the standards VG 1 and VG 2 were drafted by the Electrotechnics standards office of DIN [German Standards Institute] in cooperation with the industry and with the BWB [Federal Agency for Defence Technology and Procurement]. All plugs and couplings with sealing cap Anyone is free to use these VG standards [defence equipment standards]. They are to be regarded as recognised rules of the technology. The standards constitute a measure for perfect technical behaviour. This measure is also of importance within the framework of the legal system. One may be obliged to use them on account of legal or administrative regulations, as well as on account of contracts or for other legal reasons. Plug-type devices that have been approved by the BWB must bear the VG standard main number and the VDE mark. The basis for VG approval is passing the type test according to the VG standard. The products approved by the BWB are listed with their manufacturers in the standards series VG 5212-LZB (list of approved components). Heat resistant insert In view of the special nature of these products, please contact our sales office with your requirements. Certain products comply with NATO defence specification. Details available on request. Nickel-plated contacts Almost all 1A and A plug-type devices are Quick-Connect plug devices, i.e. maintenance-free connection technology Suitable for all conductor types and conductor cross-sections through cage clamp technology The terminal is open when supplied, and is closed and locked by pressing in the colour-coded contact slide Safe, Robust, Easy to Install 10

Product Code / Page Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page 112 22 113 22 11 22 11 2 117 2 118 2 11 13 12 28 130 2 131 2 1 2 13 2 13 2 1 3 203 0 20 0 21 13 22 102 225 102 22 102 227 102 230 0 231 0 2 0 233 0 23 0 235 0 23 0 20 22 2 25 2 27 28 2 25 13 20 8 21 8 22 8 23 8 2 8 25 8 303 58 30 58 330 58 10 78 11 78 12 78 13 78 15 78 1 78 17 78 18 78 1 78 20 78 21 78 22 78 23 78 25 78 2 78 27 78 28 78 2 78 30 78 31 78 78 33 78 35 78 3 78 37 78 38 78 3 78 0 80 1 80 2 80 3 80 5 80 80 7 80 8 80 80 50 80 51 80 52 80 53 80 55 80 5 80 57 80 58 80 5 80 0 80 1 80 2 80 3 80 5 80 80 7 80 8 80 80 5 12 712 107 713 107 71 107 70 107 830 52 831 52 8 52 833 52 83 52 835 52 837 52 22 22 7 22 1 22 1111 22 1112 22 1115 22 111 22 1117 22 111 2 1120 2 1121 2 1122 22 1123 22 112 22 1125 22 112 22 1127 22 1128 2 112 22 1130 22 113 22 1135 22 113 22 111 22 112 22 11 22 117 22 118 22 1153 22 115 22 115 22 1157 22 1158 22 115 22 22 111 22 113 22 11 22 1183 2 118 2 1200 28 1201 2 1202 2 120 2 1205 28 120 28 1207 2 1208 2 121 2 1217 2 1218 2 121 2 1220 2 1221 2 1222 2 1223 2 122 2 1225 2 122 2 1227 2 1228 2 122 2 1230 2 1231 2 12 2 1233 2 123 2 1235 2 123 2 1237 2 1238 2 123 2 125 28 12 28 127 28 128 28 12 28 1270 28 127 28 1275 28 127 28 1277 28 1278 28 127 28 1280 28 1281 28 1282 28 128 28 1287 28 1288 28 12 28 1301 2 130 2 1305 2 130 2 1307 2 1308 2 130 2 1310 2 1311 2 1312 2 1313 2 131 2 1315 2 131 2 10 2 11 2 12 2 13 2 1 2 15 2 1 2 17 2 1331 2 13 2 1333 2 135 28 1357 28 1358 28 135 28 130 28 131 28 135 28 13 28 137 28 138 28 13 28 1370 28 1371 28 1372 28 1373 28 137 28 1375 28 137 28 1380 28 1381 28 1382 28 135 28 13 28 137 28 138 28 13 28 13 3 135 3 137 3 1 3 13 3 210 0 2125 70 212 70 212 70 2130 70 2131 2 21 2 2133 2 213 70 2137 70 2138 70 211 70 212 70 213 2 21 2 215 2 218 70 21 0 2150 0 2151 0 2152 2 2153 0 215 0 2155 0 2180 2 2181 2 2182 2 2183 2 218 2 2185 2 2187 2 2188 2 218 2 210 2 211 2 212 2 213 2 21 2 215 2 217 2 218 2 21 2 2251 102 2252 102 22 102 227 102 202 210 2 211 2 212 2 213 21 215 20 21 22 23 2 25 2 270 271 272 273 27 275 27 277 281 282 283 28 285 28 287 288 28 23 2 25 200 8 201 8 20 8 210 8 211 8 212 8 213 8 21 8 215 8 21 8 11

Product Code / Page Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page 217 8 218 8 222 8 223 8 22 8 225 8 22 8 227 8 228 8 22 8 230 8 23 8 235 8 23 8 237 8 238 8 23 8 20 8 21 8 22 8 2 8 27 8 255 8 25 8 257 8 25 8 20 8 22 8 23 8 25 8 2 8 2705 50 270 50 2707 50 2708 50 270 50 2735 50 273 50 2737 50 2738 50 273 50 270 50 272 50 273 50 27 50 2751 50 2755 50 275 50 2757 50 2758 50 275 50 270 50 271 50 272 50 273 50 277 50 278 50 27 50 2770 50 2771 50 2772 50 2773 50 277 50 2775 50 277 50 2780 50 2781 50 2782 50 2783 50 278 50 2785 50 278 50 2787 50 271 50 272 50 273 50 27 50 275 50 27 50 277 50 278 50 27 50 2811 8 281 8 2815 8 2817 8 282 8 2827 8 2830 8 2831 8 2833 50 283 50 2835 50 283 50 2837 50 2838 50 280 50 281 50 2873 8 287 50 2880 50 2881 50 2882 50 28 52 310 58 3108 58 310 58 3112 58 312 0 3125 72 312 72 312 72 3130 72 3131 2 31 2 3133 2 3135 72 313 72 3137 72 3138 72 311 72 312 72 313 2 31 2 315 2 318 72 31 58 3150 58 3151 58 3152 2 3153 58 315 58 3180 0 3181 0 3182 0 3183 0 318 0 3185 0 3187 0 3188 0 310 0 311 0 312 0 313 0 31 0 315 0 317 0 318 0 31 0 111 78 112 78 113 78 11 78 11 78 117 78 118 78 11 78 120 78 211 78 212 78 213 78 21 78 21 78 217 78 218 78 21 78 220 78 311 78 312 78 313 78 31 78 31 78 317 78 318 78 31 78 0 78 35 78 355 78 35 78 357 78 35 78 30 78 31 78 78 33 78 35 78 3 78 37 78 38 78 370 78 371 78 372 78 373 78 37 78 11 80 12 80 13 80 1 80 1 80 17 80 18 80 1 80 20 80 22 80 23 80 2 80 25 80 27 80 28 80 2 80 30 80 31 80 33 80 3 80 35 80 3 80 38 80 3 80 0 80 1 80 2 80 511 80 512 80 513 80 51 80 51 80 517 80 518 80 51 80 520 80 522 80 523 80 52 80 525 80 527 80 528 80 52 80 530 80 531 80 533 80 53 80 535 80 53 80 538 80 53 80 50 80 51 80 52 80 11 80 12 80 13 80 1 80 1 80 17 80 18 80 1 80 20 80 5881 138 5882 138 5885 138 580 138 581 138 58 138 58 138 7130 107 71 107 713 107 713 107 7302 107 7303 107 7312 107 70 107 710 107 715 107 2 3 11127 3 1 2 11275 3 11302 22 11303 22 1130 22 11305 22 1130 22 11307 22 11308 22 1130 22 11310 22 11311 22 11312 22 11313 22 1131 22 11315 22 1131 22 11317 22 113 2 1137 2 1138 2 113 2 2 111 2 115 2 11 2 117 2 117 2 1177 2 117 2 1180 1181 1182 1183 1152 1155 8 11578 113 1135 1185 5 1112 1118 111 1122 118 11 115 112 12000 28 12001 28 12002 28 12003 28 1200 28 1200 13 12100 28 12101 28 12102 28 12103 28 1210 28 1210 28 12107 28 12108 28 1213 2 12135 2 1213 2 12137 2 12138 2 121 3 1217 3 12753 8 12757 8 1270 8 1271 8 12

Product Code / Page Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page 127 8 1278 8 12771 8 12772 8 13000 2 13001 2 13002 2 13003 2 1300 2 13005 2 1300 2 13007 2 13008 2 1300 2 13010 2 13011 2 13012 2 13013 2 1301 2 13015 2 1301 2 13017 2 13021 8 13023 28 1302 28 13025 28 1302 28 13027 28 13028 28 1302 3 1303 3 13070 3 13100 28 13102 28 13103 28 1310 28 13105 2 13108 2 1310 2 131 2 1317 3 10 3 13 137 138 13 13330 13331 133 13333 135 28 137 28 1351 28 1352 28 137 8 138 8 1385 8 138 8 133 8 13702 8 13703 8 13710 8 1050 8 115 3 115 3 11 3 117 3 118 3 11 3 1170 3 1171 3 1172 3 1173 3 117 3 1175 3 117 3 1181 3 1182 3 1183 3 118 3 1185 3 118 3 111 3 112 3 113 3 11 3 11 3 117 3 118 3 11 3 1200 3 1201 3 1202 3 1207 3 1208 3 1210 3 1211 3 1212 3 1217 3 1218 3 121 3 1220 3 1221 3 1222 3 1223 3 122 3 1225 3 122 3 1227 3 1228 3 1233 3 123 3 1235 3 123 3 1237 3 1238 3 123 3 1378 1380 15 1 17 18 1 3 150 3 1702 8 21000 0 21001 0 21002 0 21003 0 2100 0 21005 0 2100 0 21010 0 21012 0 21013 0 2101 0 21015 0 2101 0 21017 0 21021 0 21022 0 2102 0 21025 0 21237 2 21238 2 2123 2 2120 2 2121 2 21250 2 21251 2 213 2 21351 2 2102 2 2103 2 210 2 2107 2 2108 2 210 2 2 2 2113 2 211 2 2180 2181 2182 2183 2185 8 21557 2152 3 2100 217 21 21711 21712 21811 21817 3 21818 21823 2180 70 2182 70 2183 70 218 70 2188 3 218 3 21872 70 21873 70 21 13 2170 13 22052 102 22053 102 2205 102 22055 102 2007 2008 2010 2012 2013 2017 2018 2020 2021 2023 202 2035 202 213 21 215 217 218 21 2170 2171 2172 2173 2 217 2 2175 2 217 2177 2183 2 218 2185 213 21 215 21 217 218 21 2200 2202 2205 2208 102 220 102 2210 102 2211 102 221 230 2335 233 253 27003 50 2700 50 27005 50 2700 50 27007 50 27008 50 2700 50 27010 50 27011 50 27015 50 2701 50 27017 50 27027 8 28101 52 28103 52 28105 52 28107 52 2810 52 31000 58 31001 58 31002 58 31003 58 3100 58 31005 58 3100 58 31010 58 31012 58 31013 58 3101 58 31015 58 3101 58 31017 58 31021 58 31022 58 3120 0 3121 0 3123 0 312 0 3125 0 3127 0 3128 0 312 0 31301 0 31302 0 31305 0 3130 0 31307 0 31308 0 3130 0 31310 0 31313 0 3131 0 3123 8 31512 31513 3151 31515 317 3 312 72 31 72 315 72 31 72 3177 3 3178 3 3181 72 315 3 31752 318 13 31833 13 31880 72 31881 72 31882 72 31883 72 3188 72 312 72 3173 72 317 72 5280 12 55 12 557 12 55 12 58001 138 5800 138 5800 138 58010 138 58013 138 58018 138 5801 138 58022 138 58027 138 58028 138 58031 138 5803 138 58037 138 07 3 383 15 112001 112002 13003 13 1001 8 1002 8 1038 10087 21007 2100 70 21005 70 2100 70 21007 70 13

Product Code / Page Index Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page 210100 70 21013 70 210330 70 21038 13 210550 2103 21071 70 21075 70 212001 70 212002 70 310085 72 31005 13 310123 310311 310381 3100 72 310 72 312001 72 312002 72 5027 12 503 12 50755 12 55501 12 555015 12 10010 122 5310 122 5310/WT 122 5310 122 5310/WT 122 5313 122 5313/WT 122 5313 122 5313/WT 122 531 122 531/WT 122 5318 122 5318/WT 122 5315 122 5315/WT 122 53158 122 53158/WT 122 50 123 50/WT 12 51 123 51/WT 12 52 125 53 125 5 125 55 125 5 125 57 125 58 125 5 125 550 125 551 125 552 125 553 125 55 125 555 125 570 123 570/WT 12 571 123 571/WT 12 572 123 572/WT 12 573 123 573/WT 12 57 123 57/WT 12 575 123 575/WT 12 5330 123 5330/WT 12 5331 123 5331/WT 12 53370 123 53370/WT 12 53371 123 53371/WT 12 53372 123 53372/WT 12 53373 123 53373/WT 12 5337 123 5337/WT 12 53375 123 53375/WT 12 530 123 530/WT 12 531 123 531/WT 12 5370 123 5370/WT 12 5371 123 5371/WT 12 5372 123 5372/WT 12 5373 123 5373/WT 12 537 123 537/WT 12 5375 123 5375/WT 12 88011 11 880117 115 880118 118 88011 11 880120 11 880121 115 880122 118 880123 11 88012 11 880125 115 88012 118 880127 11 880128 11 88012 115 880130 118 880131 11 8801 11 880133 115 88013 118 880135 11 88013 11 880137 115 880138 118 88013 11 88010 11 88011 115 88012 118 88013 11 8801 11 88015 115 8801 118 88017 11 88018 11 8801 115 880150 118 880151 11 88010 8 88011 8 8801 11 88017 115 88018 118 8801 11 88020 11 88021 115 88022 118 88023 11 8802 11 88025 115 8802 118 88027 11 8808 118 880 11 88050 118 88051 11 88052 118 88053 11 8805 118 88055 11 8805 118 88057 11 88058 118 8805 11 8800 118 8801 11 8802 118 8803 11 880 118 8805 11 880 118 8807 11 8808 118 880 11 88070 118 88071 11 88051 11 880517 115 880520 11 880521 115 88052 11 880525 115 880528 11 88052 115 8805 11 880533 115 88053 11 880537 115 88050 11 88051 115 8805 11 88055 115 88058 11 8805 115 88050 11 88051 115 88052 11 88053 115 88055 11 8805 115 88002 121 8800 121 8800 121 88008 121 88010 121 88012 121 880 120 8803 120 8803 120 88038 120 8800 120 8802 120 8821 11 88221 11 88221 11 88231 11 8823 11 882 11 88271 11 88271 11 8827 11 882733 11 88271 11 88273 11 882751 11 882753 11 881 11 881 11 88331 117 88331 117 88333 117 88333 117 88315 117 88335 117 883515 117 88355 117 88125 121 8831 117 8831 117 8833 117 8833 117 8815 117 8835 117 88515 117 8855 117 885125 121 8811 1 8817 1 8820 1 882 1 8830 1 88 1 8833 1 883 1 883 1 880 1 88721 127 88723 127 8872 127 8871 127 8873 127 887 127 88751 127 88753 127 8875 127 880.1.2 1 880.1.5 1 GAR2510 135 GAR010 135 GAR00 135 GAR01 135 GAR000 135 SHO30 135 SHO350 135 1

Notes: 15

Notes: 1

Notes:

including UK Ltd Distributors/Manufacturers of: Industrial Plugs, Sockets and Combination Units to BS EN 030-2 BS 33 CEE17 Unit 2 Highbridge Court Stafford Park 1 Telford Shropshire TF3 3BD United Kingdom T 0152 212 700 F 0152 212 711 sales@ceenorm.co.uk www.ceenorm.co.uk