CNC Gantry-Type Machining Center Power - Performance - Precision Travel X-axis up to 244 in Y-axis up to 126 in Z-axis up to 39 in
Strong Machine bed, dual columns and fixed bridge ensure a rigid frame structure that provides maximum rigidity and powerful cutting capacity for very heavy parts Triple linear guides support the table across its entire travel distance in the X axis and allow table loads up to 70,548 lbs total weight (PBZ 6232) All axes feature preloaded ball screws, preloaded spindle nuts and powerful drive motors Quadruple linear guides of headstock on Z axis ensure maximum rigidity even with extra-long lay-outs The included hydraulic spindle gears allow a wide speed range and high torque description
The included hydraulic spindle gears allow a wide speed range and high torque Including weight balancing system for easy movement and precise Z axis positioning The main spindle features an oil cooler to ensure constantly balanced temperatures Quick tool changes via a tool-changer with dual-arm gripper Fanuc 0i MD control with Manual Guide for easy programming and maximum reliability Chip conveyors on both sides of the table with a capacity of 121 lb/min ensure quick chip removal from workspace; including chain-type chip conveyor Productivity and flexibility can be increased even further by using any of the optional accessories: NC Rotary Table, 90 Angle Cutter (more accessessories upon request) Automatic central lubrication is included The PBZ 6232 with W axis allows optimum positioning of the traverse during machining of different types of workpieces Every machine in this series is fully enclosed and features wide sliding doors and hinged covers to ensure easy access for set-up, tooling and unloading description
Specifications 2217 3217 3220 3225 Standard Equipment Travel X-axis 86.6 in 126 in 126 in 126 in - Fanuc 0i TD with Manual Guide 0i specifications Travel Y-axis 67 in 67 in 78.7 in 98 in Travel Z-axis 31.5 in 31.5 in 31.5 in 31.5 in Travel W-axis - - - - Table dimensions 78.7 x 59 in 118 x 59 in 118 x 67 in 118 x 83 in Table load capacity (max.) 13,228 lbs 17,637 in 22,406 in 33,069 in T-slots, spacing x width 6.3 x 0.9 in 6.3 x 0.9 in 6.3 x 0.9 in 6.3 x 0.9 in Spindle axis-to-table surface dist. 8-39 in 8-39 in 12-43 in 12-43 in Headstock Speed range 50-6000 rpm 50-6000 rpm 50-6000 rpm 50-6000 rpm Spindle mount BT 50 BT 50 BT 50 BT 50 Feed Rapid feed X- / Y-axis 394 in/min 394 in/min 394 in/min 394 in/min Rapid feed Z-axis 315 in/min 315 in/min 315 in/min 315 in/min Work feed 236 in/min 236 in/min 236 in/min 236 in/min Tool-changer Number of tool stations 32 32 32 32 - Electronic hand-wheel - Automatic central lubrication - Coolant system - Spindle oil cooler - RS-232 interface - Work lamp - Safety guard - Chip conveyor - Warning beacon - Foundation bolts - Test certificate - Operating tools - Operator manual Tool size Ø x L (max.) 7.9 x 11.8 in 7.9 x 11.8 in 7.9 x 11.8 in 7.9 x 11.8 in Tool weight max. 44 lbs 44 lbs 44 lbs 44 lbs Accuracies Positioning accuracy - X-axis 0.0014 in 0.0017 in 0.0017 in 0.0017 in - Y-axis 0.0011 in 0.0011 in 0.0014 in 0.0014 in - Z-axis 0.0011 in 0.0011 in 0.0011 in 0.0011 in Repeatability X- / Y- / Z-axis 0.0008 in 0.0008 in 0.0008 in 0.0008 in Drive capacity Motor rating main drive (cont./30 min) 20 / 25 Hp 20 / 25 Hp 20 / 25 Hp 30 / 35 Hp Measures and weights Overall dimensions 236 x 138,6 x 177 in 307 x 138,6 322,8 x 157,5 322,8 x 178 x 189 in Weight 55,116 lbs 60,186 lbs 66,139 lbs 81,571 lbs Part No. 170 050 170 051 170 052 170 053 Optional - NC Rotary Table, 1000 mm diameter - Side cutter head, manual swivel (360 ) - Internet cable connection - Workpiece control system Training - free 1-day training in Wasbek - including accommodations for 1 night in our guest house Part No. 250 655 250 656 250 657 250 658
specifications Specifications 4225 5225 6225 6232 6232 W Travel X-axis 165 in 205 in 244 in 244 in 244 in Travel Y-axis 98 in 98 in 98 in 126 in 126 in Travel Z-axis 39 in 39 in 39 in 39 in 39 in Travel W-axis - - - - 47 Table dimensions 157.5 x 83.7 in 197 x 47 in 236 x 83 in 236 x 110 in 236 x 110 in Table load capacity (max.) 35,274 in 44,093 in 48,502 in 70,548 in 70,548 in T-slots, spacing x width 6.3 x 1.1 in 6.3 x 1.1 in 6.3 x 1.1 in 7.9 x 1.1 in 7.9 x 1.1 in Spindle axis-to-table surface dist. 7.9-47 7.9-47 in 7.9-47 in 7.9-47 in 0-47 in Headstock Speed range 50-6000 rpm 50-6000 rpm 50-6000 rpm 50-6000 rpm 50-6000 rpm Spindle mount BT 50 BT 50 BT 50 BT 50 BT 50 Feed Rapid feed X- / Y-axis 394 in/min 394 in/min 394 in/min 394 in/min 394 in/min Rapid feed Z-axis 315 in/min 315 in/min 315 in/min 315 in/min 315 in/min Work feed 236 in/min 236 in/min 236 in/min 236 in/min 236 in/min Tool-changer Number of tool stations 32 32 32 32 32 Tool size Ø x L (max.) 7.9 x 11.8 in 7.9 x 11.8 in 7.9 x 11.8 in 7.9 x 11.8 in 7.9 x 11.8 in Tool weight max. 44 lbs 44 lbs 44 lbs 44 lbs 44 lbs Accuracies Positioning accuracy - X-axis 0.002 in 0.003 in 0.003 in 0.003 in 0.003 in - Y-axis 0.0014 in 0.001 in 0.001 in 0.002 in 0.002 in - Z-axis 0.0011 in 0.001 in 0.001 in 0.001 in 0.001 in Repeatability X- / Y- / Z-axis 0.0008 in 0.0008 in 0.0008 in 0.0008 in 0.0008 in Drive capacity Motor rating main drive (cont./30 min) 30 / 35 Hp 30 / 35 Hp 30 / 35 Hp 30 / 35 Hp 30 / 35 Hp Measures and weights Overall dimensions 390 x 178 472 x 178 551 x 178 610 x 219 x 217 in 610 x 252 x 268 in Weight 97,003 lbs 105,820 lbs 114,640 lbs 154,325 lbs 187,393 lbs Part No. 170 054 170 055 170 056 170 057 170 058
CNC control CNC Control Fanuc 0i-Mate TD with Manual Guide 0i High Performance for Excellent Productivity CNC Steuerung Easy creation of complex contours Fanuc 0i-Mate mit Manual Advanced fixed cycles, Guide graphical support 0i G & M Code help ISO CODE Programming Assistant DIN / ISO Programming Graphic simulation for reliable control of NC programs High compatibility with existing Fanuc CNC programs We provide prompt and proficient A wealth of world-class functions in the Basis CNC ensures maximum productivity Port for storage cards, programming storage expansions Tool life-cycle management: The tools can be subdivided in groups. High-Performance digital Servo System on all axes The life times and tool numbers for each group that are stored in the Optional free M Codes NC control can be shown in an easy to read table format. Optional relay outputs Consistent cutting speed Multiple languages Process time and parts counter User-friendly graphic display for visual review of parts program Advanced help function and alarm/operating archive 64 tool compensation pairs KNUTH Machine Tools USA, Inc., 590 Bond St., Lincolnshire, IL 60069 Tel +1-847-415-3333 Fax +1-847-415-2402 E-Mail: info@knuth-usa.com