ELECTROSURGERY PRODUCTS CATALOGUE

ELECTROSURGERY PRODUCTS CATALOGUE REUSABLE ACCESSORIES FOR ELECTROSURGERY SINGLE-USE ACCESSORIES FOR ELECTROSURGERY ELECTROSURGERY PADS ISO 9001 (2008) COMM/DOCU CHIR/022/15/C This document may be altered without prior warning following improvements to certain products ISO13485 (2003) ISO14001 (2014) Z.A. DES BOUTRIES 12 RUE DES CAYENNES BP 20310 78703 CONFLANS STE HONORINE CEDEX FRANCE TEL: +33 (0)1.39.72.11.76. FAX : +33 (0)1.39.72.61.61 e-mail: sales@integral-process.com www.integral-process.com 1 CHIR/022/15/C

SUMMARY Pages REUSABLE ELECTROSURGERY ACCESSORIES Push-button handswitch pencil with integrated cable 3 Footswitch pencil without cable 4 Monopolar adapter cables 5 Reusable monopolar insulated electrodes for electrosurgical pencil Shaft 2.35 mm 6 to 15 Reusable monopolar insulated electrodes for electrosurgical pencil Shaft 4 mm 16 to 17 Reusable monopolar insulated electrodes for gynaecology-urology 18 to 19 Monopolar forceps 20 to 22 Cable adapters for monopolar HF surgical instruments 23 to 24 Cable adapters for pre-gelled electrosurgical pads 25 Accessories for handswitch pencils and electrodes 26 Bipolar forceps, standard 27 to 35 Bipolar forceps, standard CARBON tip 36 to 38 «NonStick» bipolar forceps 39 to 56 Bipolar forceps with irrigation 57 Bipolar forceps with succion 58 to 59 Bipolar scissors 60 to 61 Bipolar cable adapters for forceps 62 to 65 Bipolar cable adapters for cœlioscopy ETHICON 66 to 67 Bipolar cable adapters for KARL STORZ 68 Bipolar cable adapters for AESCULAP 69 Bipolar cable adapters for ETHICON & scissors 70 SINGLE-USE ELECTROSURGICAL ACCESSORIES Push-button handswitch pencil 71 to 72 Footswitch pencil 73 Single-use insulated monopolar electrodes for electrosurgical pencil 74 to 82 Single-use TUNGSTENE micro dissection electrodes for electrosurgical pencil 83 to 89 Single-use bipolar forceps without cable 90 to 93 Single-use bipolar forceps with integrated cable 94 to 97 Single-use pre-gelled electrosurgical pads 98 to 100 The manufacturers listed are the holders of their respective names and/or trademarks, and are not to be taken as an endorsement or affiliation with Integral Process. 2 CHIR/022/15/C

REUSABLE HANDSWITCH PENCILS FOR ELECTROSURGICAL GENERATORS HANDSWITCH PENCIL WITH INTEGRATED CABLE Reusable. Autoclavable (134 C / 18 min.) Machine wash (operating theater or laboratory). 0123 Number of uses: minimum 100. Over, a frequent check is recommended Packaging : - Unit - Cable length 3 meters : box of 50 pencils - Cable length 5 meters : box of 35 pencils ERBE ACC / ICC 3 POINTS US CONNECTOR 41460 41451 2.35 mm Cable length 3 meters Blade electrode supplied Cable length 3 meters Blade electrode supplied 41461 41452 2.35 mm Cable length 5 meters Blade electrode supplied Cable length 5 meters Blade electrode supplied 41460 D 41451 D 4 mm Cable length 3 meters Blade electrode not supplied Cable length 3 meters Blade electrode not supplied 41461 D 41452 D 4 mm Cable length 5 meters Blade electrode not supplied Cable length 5 meters Blade electrode not supplied 3 CHIR/022/15/C

REUSABLE HANDSWITCH PENCILS FOR ELECTROSURGICAL GENERATORS FOOTSWITCH PENCIL WITHOUT CABLE Reusable. Autoclave (134 C / 18 min.) Machine wash (operating theater or laboratory). 0123 Material : Polyacetale (POM) Number of uses : minimum 100 ALL GENERATOR TYPES LENGTH 14,5 2.35 mm 40455 M 4 mm 40455 MD 4 CHIR/022/15/C

Part number : Manufacturer part number : MONOPOLAR CABLE ADAPTERS MONOPOLAR CABLE ADAPTERS FOR FOOTSWITCH PENCILS AND MONOPOLAR FORCEPS Autoclavable (134 C / 18 min.) GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH GENERATOR TYPE 4 mm 4 mm 40457-4m 4.00 m ALL GENERATOR TYPES 4 mm 4 mm 40457-5m 5.00 m ALL GENERATOR TYPES 5 mm 4 mm 40459-4m 4.00 m ERBE ACC / ICC ERBE VIO MONOPOLAR CABLE ADAPTERS FOR ERBE PUSH-BUTTON HANDSWITCH PENCILS Autoclavable (134 C / 18 min.) GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH GENERATOR TYPE 4 mm 6 mm 40447 3.00 m ERBE SERIE T 5 mm 6 mm 40445 3.00 m ERBE ACC / ICC ERBE VIO 5 mm 6 mm 40445-5m 5.00 m ERBE ACC / ICC ERBE VIO 5 CHIR/022/15/C

Part number : Manufacturer part number : REUSABLE INSULATED MONOPOLAR ELECTRODES FOR ELECTROSURGICAL PENCIL - STANDARD - SHAFT Ø 2.35 mm Reusable DESCRIPTION LENGTH PART NUMBER VIEW Tip blade medium, long insulator Active part 3,5 mm Black color insulator 84 mm 44050 CO84i1 Tip blade long, long insulator Active part 3,5 mm Black color insulator 100 mm 44051 CO100i1 Tip blade extra long, long insulator Active part 3,5 mm Black color insulator 120 mm 44052 CO120i1 6 CHIR/022/15/C

Part number : Manufacturer part number : REUSABLE INSULATED MONOPOLAR ELECTRODES Réutilisable Reusable FOR ELECTROSURGICAL PENCIL WITH HEXAGONAL SHOULDER SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW Tip blade standard Grey color insulator 65 mm 44081 CO65ips 65 20 2.5 0.6 Tip blade medium Grey color insulator 84 mm 44082 84 CO84ips 20 2.5 0.6 Tip blade standard Grey color insulator 100 mm 44160 Tip blade standard Grey color insulator 115 mm 44078 4CO115ips Tip blade long Grey color insulator 120 mm 44083 CO120ips 120 20 2.5 0.6 Tip blade extra long Grey color insulator 150 mm 44084 CO150ips 150 20 2.5 0.6 - Packaging : box of 10 units 7 CHIR/022/15/C

Part number : Manufacturer part number : REUSABLE INSULATED MONOPOLAR ELECTRODES FOR ELECTROSURGICAL PENCIL ANGLED WITH HEXAGONAL SHOULDER SHAFT Ø 2.35 mm Reusable DESCRIPTION LENGTH PART NUMBER VIEW Angled blade standard Grey color insulator 65 mm 44085 65 CC65ips 135 20 Angled blade medium Grey color insulator 84 mm 44086 CC84ips 84 135 20 Angled blade medium Grey color insulator 100 mm 44161 Angled blade long Grey color insulator 120 mm 44087 CC120ips 120 135 20 Angled blade extra long Grey color insulator 150 mm 44088 CC150ips 150 135 20 Packaging : box of 10 units 8 CHIR/022/15/C

Part number : Manufacturer part number : REUSABLE INSULATED MONOPOLAR ELECTRODES FOR ELECTROSURGICAL PENCIL SHAFT Ø 2.35 mm Réutilisable Reusable DESCRIPTION LENGTH PART NUMBER VIEW Arched blade medium, long insulator Active part 3,5 mm Black color insulator 84 mm 44053 CC84i2 Arched blade medium, long insulator Active part 3,5 mm Black color insulator 100 mm 44054 CC100i2 Arched blade extra long, long insulator Active part 3,5 mm Black color insulator 120 mm 44055 CC120i2 - Packaging: box of 10 units 9 CHIR/022/15/C

Part number : Manufacturer part number : REUSABLE INSULATED MONOPOLAR ELECTRODES FOR ELECTROSURGICAL PENCILS - STANDARD - SHAFT Ø 2.35 mm Réutilisable DESCRIPTION LENGTH PART NUMBER VIEW Ball 3 mm Black color insulator 65 mm 44059 BO 65i3 Ball 3 mm Black color insulator 65 mm 44060 BC 65i3 Ball 3 mm Black color insulator 84 mm 44061 BO 84i3 - Packaging: box of 10 units 10 CHIR/022/15/C

Part number : Manufacturer part number : REUSABLE INSULATED MONOPOLAR ELECTRODES FOR ELECTROSURGICAL PENCILS - STANDARD - SHAFT Ø 2.35 mm Reusable DESCRIPTION LENGTH PART NUMBER VIEW Ball 5 mm Black color insulator 65 mm 44062 BO 65i5 Ball 5 mm angled Black color insulator 65 mm 44063 BC 65i5 Ball 5 mm Black color insulator 84 mm 44064 BO 84i5 - Packaging: box of 10 units 11 CHIR/022/15/C

Part number : Manufacturer part number : Reusable REUSABLE INSULATED MONOPOLAR BALL ELECTRODES FOR ELECTROSURGICAL PENCILS - WITH HEXAGONAL SHOULDER SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW Ball 3 mm 50 mm 44171 BO50ips3 Ball 3 mm 120 mm 44172 BO120ips3 Ball 5 mm 50 mm 44173 BO50ips5 Ball 5 mm 120 mm 44174 BO120ips5 - Packaging: box of 10 units 12 CHIR/022/15/C

Part number : Manufacturer part number : Reusable REUSABLE INSULATED MONOPOLAR ELECTRODES FOR ELECTROSURGICAL PENCILS - STANDARD - SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW Needle thin standard/foam tip 1,0 mm Grey color insulator 65 mm 44029 AI 65i10a Needle thin standard/foam tip 1,0 mm Grey color insulator 65 mm 44039 Ai65i10-11 - Packaging: box of 10 units 13 CHIR/022/15/C

Part number : Manufacturer part number : Reusable REUSABLE INSULATED MONOPOLAR ELECTRODES FOR ELECTROSURGICAL PENCILS - WITH HEXAGONAL SHOULDER SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW Needle standard/thin tip 0,6 mm 65 mm 44095 65 AI65ips06 0.6 Grey color insulator 20 Needle standard/thin tip 0,8 mm 65 mm 44096 AI65ips08 65 0.8 Grey color insulator 20 Needle medium/thin tip 0,8 mm Grey color insulator 84 mm 44098 AI84ips08 84 20 0.8 Needle extra long/thin tip 0,8 mm Grey color insulator 150 mm 44099 AI150ips08 150 20 0.8 - Packaging: box of 10 units 14 CHIR/022/15/C

Part number : Manufacturer part number : Reusable REUSABLE INSULATED MONOPOLAR NEEDLE ANGLED ELECTRODES FOR ELECTROSURGICAL PENCILS - WITH HEXAGONAL SHOULDER SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW 44175 Needle angled 0,8 mm tip 65 mm AC65ips08 Needle angled 0,8 mm tip 84 mm 44176 AC84ips08 Needle angled 0,8 mm tip 150 mm 44177 AC150ips08 Needle angled 1 mm tip 65 mm 44178 AC65ips10 - Packaging: box of 10 units 15 CHIR/022/15/C

Part number : Manufacturer part number : REUSABLE INSULATED MONOPOLAR ELECTRODES FOR ELECTROSURGICAL PENCIL WITH HEXAGONAL SHOULDER SHAFT Ø4.00 mm Reusable DESCRIPTION LENGTH PART NUMBER VIEW Blade standard Tip Black color insulator 60 mm 44070 4CO60 ips Blade spatula Tip Black color insulator 60 mm 44080 4L60 ips Needle thin Tip 0.8 mm Black color insulator 60 mm 44076 4AI60ips Needle thin angled 0.8 mm Black color insulator 60 mm 44077 4AC60ips - Packaging: box of 10 units 16 CHIR/022/15/C

Part number : Manufacturer part number : Reusable REUSABLE INSULATED MONOPOLAR ELECTRODES FOR ELECTROSURGICAL PENCIL WITH HEXAGONAL SHOULDER SHAFT Ø4.00 mm DESCRIPTION LENGTH PART NUMBER VIEW Ball standard 2 mm Black color insulator 60 mm 44073 4B060ips2 Ball standard 4 mm Black color insulator 60 mm 44074 4B060ips4 Ball standard 6 mm Black color insulator 60 mm 44075 4B060ips6 - Packaging: box of 10 units 17 CHIR/022/15/C

Part number : Manufacturer part number : Reusable REUSABLE MONOPOLAR INSULATED ELECTRODES FOR GYNAECOLOGY AND UROLOGY SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW T. Bar 10 x 10 mm Yellow color insulator 120 mm 44030 T1010-R-120 T. Bar 20 x 15 mm Green color insulator 120 mm 44031 T2015-R-120 T. Bar 20 x 20 mm White color insulator 120 mm 44032 T2020-R-120 - Packaging: box of 10 units 18 CHIR/022/15/C

Part number : Manufacturer part number : REUSABLE MONOPOLAR INSULATED ELECTRODES FOR GYNAECOLOGY AND UROLOGY SHAFT Ø 2.35 mm Reusable DESCRIPTION LENGTH PART NUMBER VIEW Loop 6 mm Grey color insulator 60 mm 44034 AN60i06 Loop 8 mm Grey color insulator 60 mm 44035 AN60i08 Loop 10 mm Grey color insulator 60 mm 44036 AN60i10 Loop 10 mm Grey color insulator 84 mm 44037 AN 84i10 Loop 10 mm Grey color insulator 110 mm 44038 AN 110i10 - Packaging: box of 10 units 19 CHIR/022/15/C

Part number : MONOPOLAR FORCEPS WITHOUT GUIDE FOR H.F. SURGERY MONOPOLAR COAGULATION FORCEPS WITHOUT GUIDE - MALE PLUG 4 MM Insulated autoclavable (134 C / 18 min.) Application : All types of surgery Vessels coagulation To be used with cables part numbers: 40457-4m, 40459-4m (page 6) or cables described as per page 26 Or to be used without cables : Coagulation occurs when the pencil s electrode enters into contact with the back part of the forceps. This technique avoids having to unplug the pencil when using the forceps. Available in various lengths, shapes and tip diameters. 20 CHIR/022/15/C

Part number : MONOPOLAR FORCEPS WITHOUT GUIDE 4 MM MALE CONNECTOR TOTAL LENGTH : 14,5 ADSON ENDING TIP 1,0 mm PART NUMBER 0910214 TOTAL LENGTH : 18 TIP ENDING TIP 2,0 mm PART NUMBER 0910318 TOTAL LENGTH : 21 TIP ENDING TIP 2,0 mm 4,0 mm PART NUMBER 0910321 0910218 21 CHIR/022/15/C

Part number : MONOPOLAR FORCEPS WITHOUT GUIDE 4 MM MALE CONNECTOR TOTAL LENGTH : 24 TIP ENDING TIP 2,0 mm 4,0 mm PART NUMBER 0910324 0910221 TOTAL LENGTH : 28 TIP ENDING TIP 4,0 mm PART NUMBER 0910224 22 CHIR/022/15/C

Part number : CABLE ADAPTERS FOR MONOPOLAR HF SURGICAL INSTRUMENTS CABLE ADAPTERS FOR MONOPOLAR HF SURGICAL INSTRUMENTS European standards. Autoclavable (134 C / 18 mn). These cables are equipped with a 4mm female socket protected with a retractable sleeve, giving perfect security. No metallic part should be in contact with the user, according to current directives. GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH GENERATOR TYPE 4 mm 4 mm 40440 3.50 m ALL TYPES MALE CONNECTOR FEMALE CONNECTOR 8 mm 4 mm 40441 3.50 m BOVIE VALLEYLAB MALE CONNECTOR FEMALE CONNECTOR 5 mm 3 mm 40444 3.50 m ERBE ACC / ICC MALE CONNECTOR FEMALE CONNECTOR 5 mm 4 mm 40446 3.50 m ERBE ACC / ICC MALE CONNECTOR FEMALE CONNECTOR 4 mm 4 mm 40439 3.50 m VARIOUS MALE CONNECTOR MALE CONNECTOR 4 mm 3 mm 40470 4.00 m ALL TYPES (for coelioscopy) MALE CONNECTOR FEMALE CONNECTOR 2 mm 4 mm 40442 3.50 m MARTIN BERTCHTOLD MALE CONNECTOR FEMALE CONNECTOR 23 CHIR/022/15/C

Part number : CABLE ADAPTERS FOR MONOPOLAR HF SURGICAL RESECTION INSTRUMENTS CABLE ADAPTERS FOR MONOPOLAR HF SURGICAL RESECTION INSTRUMENTS European standards. Autoclavable (134 C / 18 mn). These cables are equipped with a 4mm female socket protected with a retractable sleeve, giving perfect security. No metallic part should be in contact with the user, according to current directives. GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH GENERATOR TYPE 4 mm 11mm 40600 3.00 m ALL GENERATORS MALE CONNECTOR FEMALE CONNECTOR 4 mm 11mm 40601 5.00 m ALL GENERATORS MALE CONNECTOR FEMALE CONNECTOR 5 mm 11mm 40602 3.00 m ERBE ACC / ICC MALE CONNECTOR FEMALE CONNECTOR 5 mm 11mm 40603 5.00 m ERBE ACC / ICC MALE CONNECTOR FEMALE CONNECTOR 24 CHIR/022/15/C

Part number : NEUTRAL ELECTRODES CABLE ADAPTERS White color CABLE ADAPTERS FOR PRE-GELLED ELECTROSURGICAL PADS GENERATOR SIDE NEUTRAL ELECTRODE SIDE PART NUMBER LENGTH GENERATOR TYPE 40421A 6.35 25 mm 3.00 m BERTCHTOLD BOVIE 40421A-L* ERBE T-Serie LAMIDEY MARTIN 6.35 25 mm 40411A 5.00 m 6.35 Wide insulator 25 mm 40431A 40431A-L* 3.00 m ERBE ACC / ICC ERBE VIO 6.35 Wide insulator 25 mm 40433A 5.00 m 40427A 25 mm 40427A-L* 3.00 m VALLEYLAB CONMES BOWA 25 mm 40432A 5.00 m 25 mm 40434A 3.00 m 25 mm 40435A 5.00 m EMC DOLLEY Générateurs Statome 40421A-L, 40431A-L et 40427A-L : Part numbers to be ordered for a Wide Connector (see picture) 25 CHIR/022/15/C

Part Number : Manufacturer part number : ACCESSORIES FOR HANDSWITCH PENCIL AND ELECTRODE DESCRIPTION COMMENTS PART NUMBERS PHOTO Pencil holster - Reusable ALL BRANDS Minimum order : 10 44091 519 Pencil holster Single use-sterile ALL BRANDS Box of 25 units F4545 Abrasive cleaning pad U. U. ALL BRANDS Minimum order : 30 44092 580 Adapter 4 mm / 2.35 mm LENGTH : 30 mm ALL BRANDS 44090 4-A564-R-30 Extension for electrode 120 mm ALL BRANDS 44093 E550-R-120 Extension for electrode 200 mm ALL BRANDS 44094 E550-R-200 Adapter for push-button handswitch pencil 3-pins connector to HF generator ERBE ACC / ICC NOUVELLE GENERATION 40486 F 4832 Adapter for push-button handswitch pencil 3-pins connector to HF generator BERTCHOLD MARTIN 40482 F 4831 Adapter for push-button handswitch pencil 3-pins connector to HF generator LAMIDEY 40487 571 L 26 CHIR/022/15/C

Part Number : Manufacturer part number : BIPOLAR FORCEPS WITHOUT guide, add «A» to the PN WITH guide, add «C» to the PN THREE FORCEPS TYPES: STANDARD NON STICK CARBON TWO CONNECTION TYPES TWO WIDTH : STANDARD LARGE WITH OR WITHOUT GUIDE TWO THICKNESS : STANDARD MICRO THREE LENGTH : 4 mn 6 mn 8 mm European Connection US Connection. 27 CHIR/022/15/C

Part Number : Manufacturer part number : BIPOLAR FORCEPS WITHOUT GUIDE FOR H.F. SURGERY EUROPEAN OR U.S. CONNECTION STANDARD BIPOLAR FORCEPS WITHOUT GUIDE Autoclavable (134 C / 18 min.) 80 to 120 sterilization cycles warrantee Plastic coating insulation, which does not alterate even after many sterilization cycles Polished tips. European standard connection. Application: General surgery Micro-surgery Repair surgery Vascular surgery STANDARD BIPOLAR FORCEPS WITHOUT GUIDE, CARBON TIPS Same specifications as above but the carbon tips ensure a better prehension thus avoiding tissue sticking on the forceps during dissection or coagulation. Application : Orthopedy BIPOLAR FORCEPS WITH GUIDE FOR H.F. SURGERY EUROPEAN OR U.S. CONNECTION BIPOLAR FORCEPS WITH GUIDE-PATENTED Spedial guide ensures a fixed distance between the blades, preventing endings from crossing The quality of the polishing of the endings prevents biological tissues sticking during use Unalterable plastic coating insulation, resists to sterilization in autoclave (134 C / 18 min.). 80 to 120 sterilization cycles warranteed. European standard connection. Available in variuous shapes and endings. Application : Micro-surgery O.R.L. Gynaecoligy Neurosurgery 28 CHIR/022/15/C

«STANDARD» BIPOLAR FORCEPS ADSON Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 12 080012 080012US STRAIGHT Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.3 mm Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm 11 080011 080011US 080111 080111US 080211 080211US 080311 080311US 080411 080411US 29 CHIR/022/15/C

STRAIGHT ANGLED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 11 081011 08011US 081211 081211US 081411 081411US STRAIGHT CURVED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 11 081111 081111US 082111 082111US 083111 083111US 084111 084111US 30 CHIR/022/15/C

STRAIGHT Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 14 080414 080414US 080614 080614US 16 080016 080016US 080216 080216US 080316 080316US 080416 080416US 080616 080616US 18 080018 080018US 080218 080218US 080318 080318US 080418 080418US 080618 080618US 19,5 080019 080019US 080219 080219US 080319 080319US 080419 080419US 080619 080619US 22 080022 080022US 080222 080222US 080322 080322US 080422 080422US 080622 080622US 24 080024 080024US 080224 080224US 080324 080324US 080424 080424US 080624 080624US STRAIGHT ANGLED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16 081016 081016US 081216 081216US 081316 081316US 081416 081416US 081616 081616US 18 081018 081018US 081218 081218US 081318 081318US 081418 081418US 081618 081618US 19,5 081019 081019US 081219 081219US 081319 081319US 081419 081419US 081619 081619US 22 081022 081022US 081222 081222US 081322 081322US 081422 081422US 081622 081622US 24 081024 081024US 081224 081224US 081324 081324US 081424 081424US 081624 081624US 31 CHIR/022/15/C

BAYONET Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16 082016 082016US 082216 082216US 082316 082316US 082416 082416US 082616 082616US 18 082018 082018US 082218 082218US 082318 082318US 082418 082418US 082618 082618US 19,5 082019 082019US 082219 082219US 082319 082319US 082419 082419US 082619 082619US 22 082022 082022US 082222 082222US 082322 082322US 082422 082422US 082622 082622US 24 082024 082024US 082224 082224US 082324 082324US 082424 082424US 082624 082624US BAYONET OUTSIDE ANGLE Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16 083016 083016US 083216 083216US 083316 083316US 083416 083416US 083616 083616US 18 083018 083018US 083218 083218US 083318 083318US 083418 083418US 083618 083618US 19,5 083019 083019US 083219 083219US 083319 083319US 083419 083419US 083619 083619US 22 083022 083022US 083222 083222US 083322 083322US 083422 083422US 083622 083622US 24 083024 083024US 083224 083224US 083324 083324US 083424 083424US 083624 083624US 32 CHIR/022/15/C

BAYONET INSIDE ANGLE Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16 084016 084016US 084216 084216US 084316 084316US 084416 084416US 084616 084616US 18 084018 084018US 084218 084218US 084318 084318US 084418 084418US 084618 084618US 19,5 084019 084019US 084219 084219US 084319 084319US 084419 084419US 084619 084619US 22 084022 084022US 084222 084222US 084322 084322US 084422 084422US 084622 084622US 24 084024 084024US 084224 084224US 084324 084324US 084424 084424US 084624 084624US BAYONET LARGE Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 16 085016 085016US 085116 085116US 085316 085216US 085416 085416US 085616 085616US 17 085017 085017US 085117 085117US 085217 085217US 085417 085417US 085617 085617US 20 085020 085020US 085120 085120US 085220 085220US 085420 085420US 085620 085620US 23 085023 085023US 085123 085123US 085223 085223US 085423 085423US 085623 085623US 25 085025 085025US 085125 085125US 085225 085225US 085425 085425US 085625 085625US 30 085030 085030US 085130 085130US 085230 085230US 085430 085430US 085630 085630US 33 CHIR/022/15/C

BAYONET LARGE OUTSIDE ANGLE Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16 086016 086016US 086116 086116US 086316 086216US 086416 086416US 086616 086616US 17 086017 086017US 086117 086117US 086217 086217US 086417 086417US 086617 086617US 20 086020 086020US 086120 086120US 086220 086220US 086420 086420US 086620 086620US 23 086023 086023US 086123 086123US 086223 086223US 086423 086423US 086623 086623US 25 086025 086025US 086125 086125US 086225 086225US 086425 086425US 086625 086625US 30 086030 086030US 086130 086130US 086230 086230US 086430 086430US 086630 086630US BAYONET LARGE INSIDE ANGLE Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16 087016 087016US 087116 087116US 087316 087216US 087416 087416US 087616 087616US 17 087017 087017US 087117 087117US 087217 087217US 087417 087417US 087617 087617US 20 087020 087020US 087120 087120US 087220 087220US 087420 087420US 087620 087620US 23 087023 087023US 087123 087123US 087223 087223US 087423 087423US 087623 087623US 25 087025 087025US 087125 087125US 087225 087225US 087425 087425US 087625 087625US 30 087030 087030US 087130 087130US 087230 087230US 087430 087430US 087630 087630US 34 CHIR/022/15/C

STRAIGHT CURVED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16,5 088016 088016US 088216 088216US 088516 088416US 22 088022 088022US 088022 088222US 088422 088422US 35 CHIR/022/15/C

«STANDARD CARBON TIP» BIPOLAR FORCEPS STRAIGHT CARBON Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Striped tip1.20 mm Striped tip2.20 mm 19,5 0810419 0810419US 0810619 0810619US 22 0810422 0810422US 0810622 0810622US 25 0810425 0810425US 0810625 0810625US 30 0810430 0810430US 0810630 0810630US 36 CHIR/022/15/C

STRAIGHT Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 11 0810411 0810411US STRAIGHT ANGLED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.50 mm 19 0811619 0811619US 37 CHIR/022/15/C

BAYONET LARGE CARBON Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Striped tip 1.20 mm Striped tip2.20 mm 19 0812419 0812419US 0812619 0812619US 22 0812422 0812422US 0812622 0812622US MEUSER Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Striped tip 1.20 mm Striped tip2.20 mm 19,5 0821619 0821619US 38 CHIR/022/15/C

NON STICK BIPOLAR FORCEPS AN INNOVATION IN TERMS OF ELECTROSURGERY Made of a special alloy for INTEGRALPROCESS No more tissue stick on the tips of the forceps NonStick with a uniform and rapid distribution of temperature eliminates the risk of tissue adhesion Fixed distance Impossible to cross the endings DIMENSIONS : OVERALL LENGTH 39 CHIR/022/15/C

NonStick BIPOLAR FORCEPS FOR H.F. SURGERY EUROPEAN OR U.S.CXONNECTION WITHOUT guide, add «A» to the PN WITH guide add «C» to the PN + «NS» for NON-STICK BIPOLAR FORCEPS SPECIAL ALLOY specific material avoids tissues to stick on forceps tips Special guide ensures a fixed distance between blades thus preventing endings from crossing over Plastic coating insulation, unalterable in autoclave (134 C / 18 min.). 80 to 120 sterilisation cycles warranteed European, standard connection Application: O.R.L. Neurosurgery Plastic surgery All types of fine surgery All bipolar forceps NonStick with guide can be supplied with U.S. connection (2 small male banana plugs). EUROPEAN CONNECTION U.S.CONNECTION 40 CHIR/022/15/C

NON STICK BIPOLAR FORCEPS Effective length, tip outside sheating : 8 mm ADSON Effective length, tip outside sheating : 8 mm Tip 1.00 mm 12 070012 070012US STRAIGHT ANGLED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm 11 071011 071011US 071211 071211US 071311 071311US 071411 071411S 41 CHIR/022/15/C

STRAIGHT Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm 11 070011 070011US 070211 070211US 070311 070311US 070411 070411US STRAIGHT CURVED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm 11 071111 071111US 072111 072111US 073111 073111US 074111 074111US 42 CHIR/022/15/C

STRAIGHT MEUSER Effective length, tip outside sheating : 8 mm Tip 2.00 mm Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm 18 0721618 0721618US STRAIGHT Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 15 070015 070015US 070215 070215US 070315 070315US 070415 070415US 070615 070615US 16 070016 070016US 070216 070216US 070316 070316US 070416 070416US 070616 070616US 18 070018 070018US 070218 070218US 070318 070318US 070418 070418US 070618 070618US 19,5 070019 070019US 070219 070219US 070319 070319US 070419 070419US 070619 070619US 22 070022 070022US 070222 070222US 070322 070322US 070422 070422US 070622 070622US 23 070523 070523US 070623 070623US 24 070024 070024US 070224 070224US 070324 070324US 070424 070424US 070624 070624US 28 070728 070728US 43 CHIR/022/15/C

STRAIGHT ANGLED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 15 071015 071015US 071215 071215US 071315 071315US 071415 071415US 071615 071615US 16 071016 071016US 071216 071216US 071316 071316US 071416 071416US 071616 071616US 18 071018 071018US 071218 071218US 071318 071318US 071418 071418US 071618 071618US 19,5 071019 071019US 071219 071219US 071319 071319US 071419 071419US 071619 071619US 22 071022 071022US 071222 071222US 071322 071322US 071422 071422US 071622 071622US 24 071024 071024US 071224 071224US 071324 071324US 071424 071424US 071624 071624US 26 071426 071426US 071626 071626US 44 CHIR/022/15/C

BAYONET Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16 072016 072016US 072216 072216US 072316 072316US 072416 072416US 072616 072616US 17 072017 072017US 072217 072217US 072317 072317US 072417 07417US 18 072018 072018US 072218 072218US 072318 072318US 072418 072418US 072618 072618US 19,5 072019 072019US 072219 072219US 072319 072319US 072419 072419US 072619 072619US 22 072022 072022US 072222 072222US 072322 072322US 072422 072422US 072622 072622US 23 072023 072023US 072223 072223US 072323 072323US 072423 072423US 072523 072523US 24 072024 072024US 072224 072224US 072324 072324US 072424 072424US 072624 072624US 25 072025 072025US 072225 072225US 072325 072325US 072425 072425US 072525 072525US 45 CHIR/022/15/C

BAYONET OUTSIDE ANGLE Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16 073016 073016US 073216 073216US 073316 073316US 073416 073416US 073616 073616US 18 073018 073018US 073218 073218US 073318 073318US 073418 073418US 073618 073618US 19,5 073019 073019US 073219 073219US 073319 073319US 073419 073419US 073619 073619US 19 073519 073519US 22 073022 073022US 073222 073222US 073322 073322US 073422 073422US 073622 073622US 23 073323 073323US 073523 073523US 24 073024 073024US 073224 073224US 073324 073324US 073424 073424US 073624 073624US 25 073325 073325US 073525 073525US 46 CHIR/022/15/C

BAYONET INSIDE ANGLE Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16 074016 074016US 074216 074216US 074316 074316US 074416 074416US 074616 074616US 18 074018 074018US 074218 074218US 074318 074318US 074418 074418US 074618 074618US 19,5 074019 074019US 074219 074219US 074319 074319US 074419 074419US 074619 074619US 19 074519 074519US 22 074022 074022US 074222 074222US 074322 074322US 074422 074422US 074622 074622US 23 074323 074323US 074523 074523US 24 074024 074024US 074224 074224US 074324 074324US 074424 074424US 074624 074624US 25 074325 074325US 074525 074525US BAYONET Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.4 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 15 075015 075015US 075115 075115US 075215 075215US 075415 075415US 075615 075615US 17 075017 075017US 075117 075117US 075217 075217US 075417 075417US 075617 075617US 20 075020 075020US 075120 075120US 075220 075220US 075420 075420US 075620 075620US 23 075023 075023US 075123 075123US 075223 075223US 075423 075423US 075623 075623US 25 075025 075025US 075125 075125US 075225 075225US 075425 075425US 075625 075625US 30 075030 075030US 075130 075130US 075230 075230US 075430 075430US 075630 075630US 47 CHIR/022/15/C

BAYONET OUTSIDE ANGLE Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 15 076015 076015US 076115 076115US 076215 076215US 076415 076415US 076615 076615US 17 076017 076017US 076117 076117US 076217 076217US 076417 076417US 076617 076617US 20 076020 076020US 076120 076120US 076220 076220US 076420 076420US 076620 076620US 23 076023 076023US 076123 076123US 076223 076223US 076423 076423US 076623 076623US 25 076025 076025US 076125 076125US 076225 076225US 076425 076425US 076625 076625US 30 076030 076030US 076130 076130US 076230 076230US 076430 076430US 076630 076630US BAYONET INSIDE ANGLE Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 15 077015 077015US 077115 077115US 077215 077215US 077415 077415US 077615 077615US 17 077017 077017US 077117 077117US 077217 077217US 077417 077417US 077617 077617US 20 077020 077020US 077120 077120US 077220 077220US 077420 077420US 077620 077620US 23 077023 077023US 077123 077123US 077223 077223US 077423 077423US 077623 077623US 25 077025 077025US 077125 077125US 077225 077225US 077425 077425US 077625 077625US 30 077030 077030US 077130 077130US 077230 077230US 077430 077430US 077630 077630US 48 CHIR/022/15/C

CURVED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 16,5 078016 078016US 078216 078216US 078416 078416US 22 078022 078022US 078222 078222US 078422 078422US STRAIGHT Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 15 079015 079015US 079215 079215US 079315 079315US 079415 079415US 079615 079615US 17 079017 079017US 079217 079217US 079317 079317US 079417 079417US 079617 079617US 20 079020 079020US 079220 079220US 079320 079320US 079420 079420US 079620 079620US 23 079023 079025US 079223 079225US 079323 079325US 079423 079425US 079623 079625US 25 079025 079030US 079225 079230US 079325 079330US 079425 079430US 079625 079630US 30 079030 079030US 079230 079230US 079330 079330US 079430 079430US 079630 079630US 35 079035 079035US 079235 079235US 079335 079335US 079435 079435US 079635 079635US 49 CHIR/022/15/C

STRAIGHT ANGLED Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 15 079115 079115US 079515 079515US 079715 079715US 079815 079815US 079915 079915US 17 079117 079117US 079517 079517US 079717 079717US 079817 079817US 079917 079917US 20 079120 079120US 079520 079520US 079720 079720US 079820 079820US 079920 079920US 23 079123 079125US 079523 079523US 079723 079723US 079823 079823US 079923 079923US 25 079125 079130US 079525 079525US 079725 079725US 079825 079825US 079925 079925US 30 079130 079130US 079530 079530US 079730 079730US 079830 079830US 079930 079930US 35 079135 079135US 079535 079535US 079735 079735US 079835 079835US 079935 079935US MEUSER Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 18 0721618 0721618US 50 CHIR/022/15/C

NON STICK BIPOLAR FORCEPS Effective length, tip outside sheating : 6 mm STRAIGHT Effective length, tip outside sheating : 6 mm Sharp tip Tip 0.4 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 11 670011 670011US 670211 670211US 670311 670311US 670411 670411US 670611 670611US 16 670016 670016US 670216 670216US 670316 670316US 670416 670416US 670616 670616US 18 670018 670018US 670218 670218US 670318 670318US 670418 670418US 670618 670618US 20 670020 670020US 670220 670220US 670320 670320US 670420 670420US 670620 670620US 23 670023 670023US 670223 670223US 670323 670323US 670423 670423US 670623 670623US 25 670025 670025US 670225 670225US 670325 670325US 670425 670425US 670625 670625US STRAIGHT ANGLED Effective length, tip outside sheating : 6 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 11 671011 671011US 671211 671211US 671311 671311US 671411 671411US 671611 671611US 16 671016 671016US 671216 671216US 671316 671316US 671416 671416US 671616 671616US 18 671018 671018US 671218 671218US 671318 671318US 671418 671418US 671618 671618US 20 671020 671020US 671220 671220US 671320 671320US 671420 671420US 671620 671620US 23 671023 671023US 671223 671223US 671323 671323US 671423 671423US 671623 671623US 25 671025 671025US 671225 671225US 671325 671325US 671425 671425US 671625 671625US 51 CHIR/022/15/C

BAYONET Effective length, tip outside sheating : 6 mm Sharp tip Tip 0.4 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 16 675016 675016US 675216 675216US 675316 675316US 675416 675416US 675616 675616US 17 675017 675017US 675217 675217US 675317 675317US 6754187 675417US 675617 675617US 20 675020 675020US 675220 675220US 675320 675320US 675420 675420US 675620 675620US 23 675023 675023US 675223 675223US 675323 675323US 675423 675423US 675623 675623US 25 675025 675025US 675225 675225US 675325 675325US 675425 675425US 675625 675625US 52 CHIR/022/15/C

BAYONET OUTSIDE ANGLE Effective length, tip outside sheating : 6 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 15 676015 676015US 676115 676115US 676215 676215US 676415 676415US 676615 676615US 17 676017 676017US 676117 676117US 676217 676217US 676417 676417US 676617 676617US 20 676020 676020US 676120 676120US 676220 676220US 676420 676420US 676620 676620US 23 676023 676023US 676123 676123US 676223 676223US 676423 676423US 676623 676623US 25 676025 676025US 676125 676125US 676225 676225US 676425 676425US 676625 676625US 30 676030 676030US 676130 676130US 676230 676230US 676430 676430US 676630 676630US BAYONET INSIDE ANGLE Effective length, tip outside sheating : 6 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 15 677015 677015US 677115 677115US 677215 677215US 677415 677415US 677615 677615US 17 677017 677017US 677117 677117US 677217 677217US 677417 677417US 677617 677617US 20 677020 677020US 677120 677120US 677220 677220US 677420 677420US 677620 677620US 23 677023 677023US 677123 677123US 677223 677223US 677423 677423US 677623 677623US 25 677025 677025US 677125 677125US 677225 677225US 677425 677425US 677625 677625US 30 677030 677030US 677130 677130US 677230 677230US 677430 677430US 677630 677630US 53 CHIR/022/15/C

NON STICK BIPOLAR FORCEPS Effective length, tip outside sheating : 4 mm MICRO BAYONET Effective length, tip outside sheating : 4 mm Sharp tip Tip 0.4 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 16 775016 775016US 775116 775116US 775216 775216US 775416 775416US 17 775017 775017US 775117 775117US 775217 775217US 775417 775417US 20 775020 775020US 775120 775120US 775220 775220US 775420 775420US 23 775023 775023US 775123 775123US 775223 775223US 775423 775423US 25 775025 775025US 775125 775125US 775225 775225US 775425 775425US 54 CHIR/022/15/C

MICRO BAYONET OUTSIDE ANGLE Effective length, tip outside sheating : 4 mm Sharp tip Tip 0.4 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 16 776016 776016US 776116 776116US 776216 776216US 776416 776416US 17 776017 776017US 776117 776117US 776217 776217US 776417 776417US 20 776020 776020US 776120 776120US 776220 776220US 776420 776420US 23 776023 776023US 776123 776123US 776223 776223US 776423 776423US 25 776025 776025US 776125 776125US 776225 776225US 776425 776425US MICRO BAYONET INSIDE ANGLE Effective length, tip outside sheating : 4 mm Sharp tip Tip 0.4 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 16 777016 777016US 777116 777116US 777216 777216US 777416 777416US 17 777017 777017US 777117 777117US 777217 777217US 777417 777417US 20 777020 777020US 777120 777120US 777220 777220US 777420 777420US 23 777023 777023US 777123 777123US 777223 777223US 777423 777423US 25 777025 777025US 777125 777125US 777225 777225US 777425 777425US 55 CHIR/022/15/C

MICRO BAYONET OUTSIDE ANGLE 80 Effective length, tip outside sheating : 4 mm Sharp tip Tip 0.4 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 20 7786120 7786120US 23 7786123 7786123US MICRO BAYONET INSIDE ANGLE 80 Effective length, tip outside sheating : 4 mm Sharp tip Tip 0.4 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 20 7787120 7787120US 23 7787123 7787123US 56 CHIR/022/15/C

BIPOLAR FORCEPS with IRRIGATION BAYONET IRRIGATION Effective length, tip outside sheating : 8 mm Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.20 mm Tip 2.00 mm 17 0835017 0835017US 0835117 0835117US 0835217 0835217US 0835417 0835417US 0835617 0835617US 20 0835020 0835020US 0835120 0835120US 0835220 0835220US 0835420 0835420US 0835620 0835620US 22 0835022 0835022US 0835122 0835122US 0835222 0835222US 0835422 0835422US 0835622 0835622US 23 0835023 0835023US 0835123 0835123US 0835223 0835223US 0835423 0835423US 0835623 0835623US 25 0835025 0835025US 0835125 0835125US 0835225 0835225US 0835425 0835425US 0835625 0835625US 57 CHIR/022/15/C

BIPOLAR FORCEPS with SUCCION BAYONET SUCCION Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 20 0840001 0840001US 0840002 0840002US 23 0840003 0840003US 0840004 0840004US MEUSER SUCCION CARBON 60 Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 3.20 mm 21 0840005 0840005US 58 CHIR/022/15/C

MEUSER SUCCION CARBON 45 Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 3.00 mm 21 0840006 0840006US STRAIGHT CURVED LARGE SUCCION Sharp tip Tip 0.5 mm Tip 0.7 mm Tip 1.00 mm Tip 2.00 mm 19 0840007 0840007US 59 CHIR/022/15/C

BIPOLAR SCISSORS STANDARD NARROW MICRO 14 030001 030001US 030021 030021US 030031 030031US 18 030002 030002US 030022 030022US 030032 030032US 23 030003 030003US 030023 030023US 28 030004 030004US 030024 030024US 60 CHIR/022/15/C

BIPOLAR SCISSORS WITH NON STICK SUCCION BIPOLAR SCISSORS WITHOUT NON STICK SUCCION 030100 030101 61 CHIR/022/15/C

CABLE ADAPTERS FOR BIPOLAR FORCEPS EUROPEAN STANDARD CONNECTION Autoclavable 134 C / 18 minutes. Color: white GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH DISTANCE GENERATOR TYPE 40495IP 3.00 m Molded banana plug 2 mm AESCULAP BERTCHTOLD MARTIN 40489IP 4.00 m 38 mm CODMAN CMCII CMCIII 40488IP 3.00 m 18 mm 1 plug 4 mm 1 plug 5 mm EMC DOLLEY Coagulasem 40497IP 3.00 m 22 mm EMC DOLLEY 40500IP 3.00 m 18 mm EMC DOLLEY 62 CHIR/022/15/C

CABLE ADAPTERS FOR BIPOLAR FORCEPS EUROPEAN STANDARD CONNECTION Autoclavable 134 C / 18 minutes. Color: white GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH DISTANCE GENERATOR TYPE 40493IP 4.50 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40490IP 3.00 m Molded plug 4 mm ERBE All types 40491IP 5.00 m Molded plug 4 mm ERBE All types 40498IP 3.00 m 25 mm LAMIDEY 63 CHIR/022/15/C

CABLE ADAPTERS FOR BIPOLAR FORCEPS U.S. STANDARD CONNECTION Autoclavable 134 C / 18 minutes. Color: white GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH DISTANCE GENERATOR TYPE 40495US 3.00 m Molded banana plug 2 mm AESCULAP BERTCHTOLD MARTIN 40438US 3.00 m Molded banana plug 2 mm AESCULAP BERTCHTOLD MARTIN 40489US 4.00 m 38 mm CODMAN CMCII CMCIII 40488US 3.00 m 18 mm 1 plug 4 mm 1 plug 5 mm EMC DOLLEY Coagulasem 40497US 3.00 m 22 mm EMC DOLLEY 40500US 3.00 m 18 mm EMC DOLLEY 64 CHIR/022/15/C

CABLE ADAPTERS FOR BIPOLAR FORCEPS U.S. STANDARD CONNECTION Autoclavable 134 C / 18 minutes. Color: white GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH DISTANCE GENERATOR TYPE 40493US 4.50 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40436US 5.00 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40490US 3.00 m Molded plug 4 mm ERBE All types 40491US 5.00 m Molded plug 4 mm ERBE All types 40437US 5.00 m Molded plug 4 mm ERBE All types 40498US 3.00 m 25 mm LAMIDEY 65 CHIR/022/15/C

BIPOLAR CABLE ADAPTERS FOR COELIOSCOPY ETHICON CONNECTION Autoclavable 134 C / 18 minutes. Color: white GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH DISTANCE GENERATOR TYPE 40495ET 3.00 m Molded banana plug 2 mm AESCULAP BERTCHTOLD MARTIN 40489ET 4.00 m 38 mm CODMAN CMCII CMCIII 40488ET 3.00 m 18 mm 1 plug 4 mm 1 plug 5 mm EMC DOLLEY Coagulasem 40497ET 3.00 m 22 mm EMC DOLLEY 66 CHIR/022/15/C

BIPOLAR CABLE ADAPTERS FOR COELIOSCOPY ETHICON CONNECTION Autoclavable 134 C / 18 minutes. Color: white GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH DISTANCE GENERATOR TYPE 40500ET 3.00 m 18 mm EMC DOLLEY 40493ET 4.50 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40490ET 3.00 m Molded plug 4 mm ERBE All types 40491ET 5.00 m Molded plug 4 mm ERBE All types 40498ET 3.00 m 25 mm LAMIDEY 67 CHIR/022/15/C

ADAPTER CABLES FOR KARL STORZ INSTRUMENTS Autoclavable 134 C / 18 minutes. Color: grey GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH DISTANCE GENERATOR TYPE 40471 5.00 m Molded banana plug 2 mm AESCULAP BERTCHTOLD MARTIN 40472 3.00 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40473 5.00 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40474 3.00 m Molded plug 4 mm ERBE All types 40475 5.00 m Molded plug 4 mm ERBE All types 68 CHIR/022/15/C

BIPOLAR CABLE ADAPTERS FOR AESCULAP BIPOLAR FORCEPS Autoclavable 134 C / 18 minutes. Color: grey GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH DISTANCE GENERATOR TYPE 40476 5.00 m Molded banana plug 2 mm AESCULAP BERTCHTOLD MARTIN 40477 3.00 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40478 5.00 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40479 3.00 m Molded plug 4 mm ERBE All types 40480 5.00 m Molded plug 4 mm ERBE All types 69 CHIR/022/15/C

ADAPTER CABLES FOR ETHICON & SCISSORS Autoclavable à 134 C / 18 minutes. Color:grey GENERATOR SIDE INSTRUMENT SIDE PART NUMBER LENGTH DISTANCE GENERATOR TYPE 40412 5.00 m Molded banana plug 2 mm AESCULAP BERTCHTOLD MARTIN 40413 3.00 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40414 5.00 m 29 mm EMC DOLLEY LAMIDEY VALLEYLAB BOWA 40415 3.00 m Molded plug 4 mm ERBE All types 40416 5.00 m Molded plug 4 mm ERBE All types 70 CHIR/022/15/C

SINGLE-PATIENT HANDSWITCH PENCIL FOR ELECTROSURGICAL GENERATORS Sterile GAMMA 0123 SINGLE USE PUSH-BUTTON HANDSWITCH PENCIL BLADE HEXAGONAL SHAFT (anti-rotation system) 230-014-3 Cable length 3 meters BLADE HEXAGONAL SHAFT (anti-rotation system) 230-014-5 Cable length 5 meters BLADE HEXAGONAL SHAFT (anti-rotation system) F 4798 Cable length 3 meters BLADE HEXAGONAL SHAFT (anti-rotation system) F 4798/5 Cable length 5 meters BLADE HEXAGONAL SHAFT (anti-rotation system) F 4798/75H Cable length 5 meters DELIVERED WITH SOFT CASE AND ABRASIVE CLEANING PAD Packaging : Packaging mini : 50 - individual pouch - display box of 10 - pack of 50 (5 display boxes) SINGLE-USE STERILE 71 CHIR/022/15/C

SINGLE-PATIENT HANDSWITCH PENCIL FOR ELECTROSURGICAL GENERATORS Sterile GAMMA 0123 SINGLE USE PUSH-BUTTON HANDSWITCH PENCIL BLADE HEXAGONAL SHAFT (anti-rotation system) 231-094-3 Cable length 3 meters For generators ERBE BLADE HEXAGONAL SHAFT (anti-rotation system) 231-094-5 Cable length 5 meters For generators ERBE BLADE HEXAGONAL SHAFT (anti-rotation system) F 4798 / ERB Cable length 3 meters For generators ERBE Packaging : Packaging mini : 50 - individual pouch - display box of 10 - pack of 50 (5 display boxes) SINGLE-USE STERILE 72 CHIR/022/15/C

SINGLE-PATIENT FOOTSWITCH PENCIL FOR ELECTROSURGICAL GENERATORS SINGLE-USE FOOT-CONTROL PENCIL WITH CABLE ADAPTER ALL GENERATOR TYPES 240-004-3 BLADE Cable length 3 meters Packaging : Packaging mini : 50 - individual pouch - display box of 10 - pack of 50 (5 display boxes) SINGLE-USE STERILE 73 CHIR/022/15/C

Part number : Manufacturer part number : SINGLE-USE INSULATED MONOPOLAR ELECTRODE FOR ELECTROSURGERY WITH HEXAGONAL SHOULDER - SHAFT Ø 2.35 mm Sterile GAMMA Sterile (ETO). Individual pouch. Available in various lengths and endings, suitable for all types or surgery. Can be connected to all types of pencil with 2.35mm diameter DESCRIPTION LENGTH PART NUMBERS VIEW Blade standard Blue color insulator 70 mm 44100 250-024-07024 Blade medium Blue color insulator 100 mm 44102 250-004-10024 Blade long Blue color insulator 125 mm 44104 250-004-12524 Blade extra long Blue color insulator 150 mm 44101 250-004-15024 - Packaging : Box of 25 units SINGLE-USE STERILE 74 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE INSULATED ELECTRODE FOR ELECTROSURGERY ANGLED & HEXAGONAL SHOULDER - SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBERS VIEW Angled blade standard Blue color insulator 70 mm 44106 250-014-07024 Angled blade medium Blue color insulator 100 mm 44107 250-014-10024 Angled blade long Blue color insulator 125 mm 44108 250-014-12524 Angled blade extra long Blue color insulator 150 mm 44109 250-014-15024 - Packaging : Box of 25 units SINGLE-USE STERILE 75 CHIR/022/15/C

Part number : Manufacturer part number : SINGLE-USE MONOPOLAR INSULATED ELECTRODE FOR ELECTROSURGERY STANDARD SHAFT Ø 2.35 mm Sterile GAMMA DESCRIPTION LENGTH PART NUMBERS VIEW Needle thin 0,8 mm Blue color insulator 70 mm 44116 250-044-07024 Needle thin 0,8 mm Blue color insulator 100 mm 44118 250-044-10024 Needle thin 0,8 mm Blue color insulator 125 mm 44119 250-044-12524 Needle thin 0,8 mm Blue color insulator 150 mm 44117 250-044-15024 - Packaging : Box of 25 units SINGLE-USE STERILE 76 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE MONOPOLAR INSULATED ELECTRODE FOR ELECTROSURGERY STANDARD - SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBERS VIEW Ball standard 3 mm Blue color insulator 55 mm 44110 250-104-06024 Ball long 3 mm Blue color insulator 130 mm 44135 250-104-13024 Ball angled 3 mm Blue color insulator 55 mm 44136 250-114-06024 Ball standard 4 mm Blue color insulator 55 mm 44134 250-124-06024 Ball medium 4 mm Blue color insulator 70 mm 44111 F4044 - Packaging : Box of 25 units except PN 44111 : Box of 24 units SINGLE-USE STERILE 77 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE MONOPOLAR INSULATED ELECTRODE FOR ELECTROSURGERY STANDARD - SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBERS VIEW Ball standard 5 mm Blue color insulator 55 mm 44112 250-144-06024 Ball long 5 mm Blue color insulator 130 mm 44113 250-144-13024 Ball angled 5 mm Blue color insulator 55 mm 44138 250-154-06024 Ball long 8 mm Blue color insulator 120 mm 44115 250-184-12024 - Packaging : Box of 25 units SINGLE-USE STERILE 78 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE MONOPOLAR INSULATED ELECTRODE FOR ELECTROSURGERY STANDARD - SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW T. Bar 10 x 10 mm Yellow color insulator 120 mm 44120 T1010-S-120 T. Bar 20 x 15 mm Yellow color insulator 120 mm 44121 T2015-S-120 T. Bar 20 x 20 mm White color insulator 120 mm 44122 T2020-S-120 - Packaging: box of 10 units SINGLE-USE STERILE 79 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE ELECTRODES FOR GYNAECOLOGY AND UROLOGY - SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBERS VIEW Loop 4 mm Blue color insulator 55 mm 44124 260-044-06040 Loop 6 mm Blue color insulator 55 mm 44125 260-044-06060 Loop 10 mm Blue color insulator 55 mm 44126 260-044-06100 U Type 20 x 20 mm White color insulator 120 mm 44129 U2020-S-120 - Packaging : box of 25 units - Except 44129 :Box of 10 SINGLE-USE STERILE 80 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE CONIZATION ELECTRODE - SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW Loop 16 x 8 mm Grey color insulator 120 mm 44150 C1608-S-120 Loop 13 x 15 mm Grey color insulator 120 mm 44151 C1315-S-120 Loop 16 x 18 mm Grey color insulator 120 mm 44152 C1618-S-120 Loop 13 x 20 mm Grey color insulator 120 mm 44153 C1320-S-120 Loop 20 x 20 mm Grey color insulator 120 mm 44154 C2020-S-120 - Packaging : box of 10 unit SINGLE-USE STERILE 81 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE ARTHROSCOPY ELECTRODE - SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW Hook medium Blue color insulator 120 mm 45160 270-004-1224 Hook long Blue color insulator 180 mm 45161 270-004-1824 Dagger medium Blue color insulator 120 mm 45162 270-014-1224 Dagger long Blue color insulator 180 mm 45163 270-014-1824 Saw medium Blue color insulator 120 mm 45164 270-044-1224 Saw medium Blue color insulator 180 mm 45165 270-044-1824 - Packaging : Box of 10 units SINGLE-USE STERILE 82 CHIR/022/15/C

Part number : Manufacturer part number : TUNGSTEN MICRO DISSECTION SINGLE-USE ELECTRODES For electrosurgery pencils Shaft 2.35 Ø mm Standard instrument for precision electrosurgery MATERIAL : Tungsten is a metal.it has the highest melting point (3422 C) of all metals, therefore it is well suited for applications at very high temperatures. It is also characterized by a thermal expansion coefficient particularly low and a high level of dimensional stability Tungsten is practicaly indestructible. USE : The ultra sharp needle electrode of tungsten causes less tissue necrosis, allows a cut and cauterization precision, and reduces smoke. SINGLE-USE STERILE 83 CHIR/022/15/C

Part number : Manufacturer part number : TUNGSTEN MICRO DISSECTION MONOPOLAR SINGLE-USE STRAIGHT ELECTRODES FOR ELECTROSURGERY SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,3 mm 50 mm ES871-MN231-050 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,3 mm 60 mm ES871-MN231-060 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,3 mm 70 mm ES871-MN231-070 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,3 mm 102 mm ES871-MN231-102 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,3 mm 152 mm ES871-MN231-152 - Packaging: box of 10 units SINGLE-USE STERILE 84 CHIR/022/15/C

Part number : Manufacturer part number : TUNGSTEN MICRO DISSECTION MONOPOLAR SINGLE-USE STRAIGHT ELECTRODES FOR ELECTROSURGERY SHAFT Ø 2.35 mm TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,5 mm 50 mm ES871-MN251-050 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,5 mm 60 mm ES871-MN251-060 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,5 mm 70 mm ES871-MN251-070 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,5 mm 102 mm ES871-MN251-102 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,5 mm 152 mm ES871-MN251-152 - Packaging: box of 10 units SINGLE-USE STERILE 85 CHIR/022/15/C

Part number : Manufacturer part number : TUNGSTEN MICRO DISSECTION MONOPOLAR SINGLE-USE STRAIGHT ELECTRODES FOR ELECTROSURGERY SHAFT Ø 2.35 mm TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,7 mm 50 mm ES871-MN271-050 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,7 mm 60 mm ES871-MN271-060 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,7 mm 70 mm ES871-MN271-070 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,7 mm 102 mm ES871-MN271-102 TUNGSTEN STRAIGHT SHEATH ELECTRODE Tip 0,7 mm 152 mm ES871-MN271-152 - Packaging: box of 10 units SINGLE-USE STERILE 86 CHIR/022/15/C

Part number : Manufacturer part number : TUNGSTEN MICRO DISSECTION MONOPOLAR SINGLE-USE 45 ANGLED ELECTRODES FOR ELECTROSURGERY SHAFT Ø 2.35 mm DESCRIPTION LENGTH PART NUMBER VIEW TUNGSTEN 45 ANGLED SHEATH ELECTRODE Tip 0,3 mm 50 mm ES871-MN232-050 TUNGSTEN 45 ANGLED SHEATH ELECTRODE Tip 0,3 mm 60 mm ES871-MN233-060 TUNGSTEN 45 ANGLED SHEATH ELECTRODE Tip 0,3 mm 70 mm ES871-MN233-070 TUNGSTEN 45 ANGLED SHEATH ELECTRODE Tip 0,3 mm 102 mm ES871-MN232-102 TUNGSTEN 45 ANGLED SHEATH ELECTRODE Tip 0,3 mm 152 mm ES871-MN232-152 - Packaging: box of 10 units SINGLE-USE STERILE 87 CHIR/022/15/C

Part number : Manufacturer part number : SINGLE-USE BIPOLAR FORCEPS FOR SURGERY H.F. EUROPEAN CONNECTION (without cable) Sterile GAMMA SINGLE-USE BIPOLAR FORCEPS STERILE APPLICATION: General surgery Orthopedic surgery ALL FORCEPS ABOVE 16,5 length are with guide CABLES FOR SINGLE-USE BIPOLAR FORCEPS GENERATOR SIDE INSTRUMENT SIDE Length : 3 of 5 meters available Fixed distance : 29 mm. Part numbers Length 200-004-3 3 mètres 200-004-5 5 mètres SINGLE-USE STERILE 90 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE BIPOLAR FORCEPS WITH & WITHOUT GUIDE Packaging: box of 10 units ENDING LENGTH TIP PART NUMBERS STRAIGHT 15,2 0,5 mm 110-064-15050 STRAIGHT 15,2 1,0 mm 110-064-15100 STRAIGHT 15,2 1,5 mm 110-064-15150 STRAIGHT 15,2 2,0 mm 110-064-15200 STRAIGHT 16,5 0,5 mm 110-064-17050 STRAIGHT 16,5 1,0 mm 110-064-17100 STRAIGHT 16,5 1,5 mm 110-064-17150 STRAIGHT 16,5 2,0 mm 110-064-17200 STRAIGHT 17,8 0,5 mm 110-064-18050 STRAIGHT 17,8 1,0 mm 110-064-18100 STRAIGHT 17,8 1,5 mm 110-064-18150 STRAIGHT 17,8 2,0 mm 110-064-18200 STRAIGHT 19,7 0,5 mm 110-064-20050 STRAIGHT 19,7 1,0 mm 110-064-20100 STRAIGHT 19,7 1,5 mm 110-064-20150 STRAIGHT 19,7 2,0 mm 110-064-20200 STRAIGHT 21,0 0,5 mm 110-064-21050 STRAIGHT 21,0 1,0 mm 110-064-21100 STRAIGHT 21,0 1,5 mm 110-064-21150 STRAIGHT 21,0 2,0 mm 110-064-21200 STRAIGHT, Angled tip 15,2 0,5 mm 110-074-15050 STRAIGHT, Angled tip 15,2 1,0 mm 110-074-15100 STRAIGHT, Angled tip 15,2 1,5 mm 110-074-15150 STRAIGHT, Angled tip 15,2 2,0 mm 110-074-15200 STRAIGHT, Angled tip 16,5 0,5 mm 110-074-17050 STRAIGHT, Angled tip 16,5 1,0 mm 110-074-17100 STRAIGHT, Angled tip 16,5 1,5 mm 110-074-17150 STRAIGHT, Angled tip 16,5 2,0 mm 110-074-17200 STRAIGHT, Angled tip 17,8 0,5 mm 110-074-18050 SINGLE-USE STERILE 91 CHIR/022/15/C

Part number : Manufacturer part number : Stérile Sterile GAMMA SINGLE-USE BIPOLAR FORCEPS WITH & WITHOUT GUIDE Packaging: box of 10 units ENDING LENGTH TIP PART NUMBERS STRAIGHT, Angled tip 17,8 1,0 mm 110-074-18100 STRAIGHT, Angled tip 17,8 1,5 mm 110-074-18150 STRAIGHT, Angled tip 17,8 2,0 mm 110-074-18200 STRAIGHT, Angled tip 19,7 0,5 mm 110-074-20050 STRAIGHT, Angled tip 19,7 1,0 mm 110-074-20100 STRAIGHT, Angled tip 19,7 1,5 mm 110-074-20150 STRAIGHT, Angled tip 19,7 2,0 mm 110-074-20200 STRAIGHT, Angled tip 21,0 0,5 mm 110-074-21050 STRAIGHT, Angled tip 21,0 1,0 mm 110-074-21100 STRAIGHT, Angled tip 21,0 1,5 mm 110-074-21150 STRAIGHT, Angled tip 21,0 2,0 mm 110-074-21200 Bayonet 15,2 0,5 mm 110-084-15050 Bayonet 15,2 1,0 mm 110-084-15100 Bayonet 15,2 1,5 mm 110-084-15150 Bayonet 15,2 2,0 mm 110-084-15200 Bayonet 16,5 0,5 mm 110-084-17050 Bayonet 16,5 1,0 mm 110-084-17100 Bayonet 16,5 1,5 mm 100-084-17150 Bayonet 16,5 2,0 mm 110-084-17200 Bayonet 17,8 0,5 mm 110-084-18050 Bayonet 17,8 1,0 mm 110-084-18100 Bayonet 17,8 1,5 mm 110-084-18150 Bayonet 17,8 2,0 mm 110-084-18200 Bayonet 20,3 0,5 mm 110-084-20050 Bayonet 20,3 1,0 mm 110-084-20100 Bayonet 20,3 1,5 mm 110-084-20150 Bayonet 20,3 2,0 mm 110-084-20200 Bayonet,tip angled right 15,2 0,5 mm 110-094-15050 SINGLE-USE STERILE 92 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE BIPOLAR FORCEPS WITH & WITHOUT GUIDE Packaging: box of 10 units ENDING LENGTH TIP PART NUMBERS Bayonet,tip angled right 15,2 1,0 mm 110-094-15100 Bayonet,tip angled right 15,2 1,5 mm 110-094-15150 Bayonet,tip angled right 15,2 2,0 mm 110-094-15200 Bayonet,tip angled right 16,5 0,5 mm 110-094-17050 Bayonet,tip angled right 16,5 1,0 mm 110-094-17100 Bayonet,tip angled right 16,5 1,5 mm 110-094-17150 Bayonet,tip angled right 16,5 2,0 mm 110-094-17200 Bayonet,tip angled right 17,8 0,5 mm 110-094-18050 Bayonet,tip angled right 17,8 1,0 mm 110-094-18100 Bayonet,tip angled right 17,8 1,5 mm 110-094-18150 Bayonet,tip angled right 17,8 2,0 mm 110-094-18200 Bayonet,tip angled right 20,3 0,5 mm 110-094-20050 Bayonet,tip angled right 20,3 1,0 mm 110-094-20100 Bayonet,tip angled right 20,3 1,5 mm 110-094-20150 Bayonet,tip angled right 20,3 2,0 mm 110-094-20200 Bayonet,tip angled left 15,2 0,5 mm 110-104-15050 Bayonet,tip angled left 15,2 1,0 mm 110-104-15100 Bayonet,tip angled left 15,2 1,5 mm 110-104-15150 Bayonet,tip angled left 15,2 2,0 mm 110-104-15200 Bayonet,tip angled left 16,5 0,5 mm 110-104-17050 Bayonet,tip angled left 16,5 1,0 mm 110-104-17100 Bayonet,tip angled left 16,5 1,5 mm 110-104-17150 Bayonet,tip angled left 16,5 2,0 mm 110-104-17200 Bayonet,tip angled left 17,8 0,5 mm 110-104-18050 Bayonet,tip angled left 17,8 1,0 mm 110-104-18100 Bayonet,tip angled left 17,8 1,5 mm 110-104-18150 Bayonet,tip angled left 17,8 2,0 mm 110-104-18200 Bayonet,tip angled left 20,3 0,5 mm 110-104-20050 Bayonet,tip angled left 20,3 1,0 mm 110-104-20100 Bayonet,tip angled left 20,3 1,5 mm 110-104-20150 Bayonet,tip angled left 20,3 2,0 mm 110-104-20200 SINGLE-USE STERILE 93 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE BIPOLAR FORCEPS WITH INTEGRATED CABLE FOR SURGERY H.F. EUROPEAN CONNECTION SINGLE-USE BIPOLAIRE FORCEPS WITH INTEGRATED CABLE STERILE APPLICATION General surgery Orthopedic surgery ALL FORCEPS ABOVE 16,5 LENGTH ARE WITH GUIDE CABLE LENGTH 3 METERS SINGLE-USE STERILE 94 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE BIPOLAR FORCEPS WITH & WITHOUT GUIDE WITH INTEGRATED CABLE Packaging: box of 10 units ENDING LENGTH TIP PART NUMBERS STRAIGHT Adson 12,1 0,5 mm 110-055-12050 STRAIGHT Adson 12,1 1,0 mm 110-055-12100 STRAIGHT Adson 12,7 0,5 mm 110-055-13050 STRAIGHT Adson 12,7 1,0 mm 110-055-13100 STRAIGHT 15,2 0,5 mm 110-065-15050 STRAIGHT 15,2 1,0 mm 110-065-15100 STRAIGHT 15,2 1,5 mm 110-065-15150 STRAIGHT 15,2 2,0 mm 110-065-15200 STRAIGHT 16,5 0,5 mm 110-065-17050 STRAIGHT 16,5 1,0 mm 110-065-17100 STRAIGHT 16,5 1,5 mm 110-065-17150 STRAIGHT 16,5 2,0 mm 110-065-17200 STRAIGHT 17,8 0,5 mm 110.065-18050 STRAIGHT 17,8 1,0 mm 110-065-18100 STRAIGHT 17,8 1,5 mm 110-065-18150 STRAIGHT 17,8 2,0 mm 110-065-18200 STRAIGHT 19,7 0,5 mm 110-065-20050 STRAIGHT 19,7 1,0 mm 110-065-20100 STRAIGHT 19,7 1,5 mm 110-065-20150 STRAIGHT 19,7 2,0 mm 110-065-20200 STRAIGHT 21,0 0,5 mm 110-065-21050 STRAIGHT 21,0 1,0 mm 110-065-21100 STRAIGHT 21,0 1,5 mm 110-065-21150 STRAIGHT 21,0 2,0 mm 110-065-21200 STRAIGHT, Angled tip 15,2 0,5 mm 110-075-15050 STRAIGHT, Angled tip 15,2 1,0 mm 110-075-15100 STRAIGHT, Angled tip 15,2 1,5 mm 110-075-15150 STRAIGHT, Angled tip 15,2 2,0 mm 110-075-15200 STRAIGHT, Angled tip 16,5 0,5 mm 110-075-17050 STRAIGHT, Angled tip 16,5 1,0 mm 110.075-17100 STRAIGHT, Angled tip 16,5 1,5 mm 110-075-17150 STRAIGHT, Angled tip 16,5 2,0 mm 110-075-17200 STRAIGHT, Angled tip 17,8 0,5 mm 110-075-18050 STRAIGHT, Angled tip 17,8 1,0 mm 110-075-18100 SINGLE-USE STERILE 95 CHIR/022/15/C

Part number : Manufacturer part number : Stérile Sterile GAMMA GAMMA SINGLE-USE BIPOLAR FORCEPS WITH & WITHOUT GUIDE WITH INTEGRATED CABLE Packaging: box of 10 units ENDING LENGTH TIP PART NUMBERS STRAIGHT, Angled tip 17,8 1,5 mm 110-075-18150 STRAIGHT, Angled tip 17,8 2,0 mm 110-075-18200 STRAIGHT, Angled tip 19,7 0,5 mm 110-075-20050 STRAIGHT, Angled tip 19,7 1,0 mm 110-075-20100 STRAIGHT, Angled tip 19,7 1,5 mm 110-075-20150 STRAIGHT, Angled tip 19,7 2,0 mm 110-075-20200 STRAIGHT, Angled tip 21,0 0,5 mm 110-075-21050 STRAIGHT, Angled tip 21,0 1,0 mm 110-075-21100 STRAIGHT, Angled tip 21,0 1,5 mm 110-075-21150 STRAIGHT, Angled tip 21,0 2,0 mm 110-075-21200 Bayonet 15,2 0,5 mm 110-085-15050 Bayonet 15,2 1,0 mm 110-085-15100 Bayonet 15,2 1,5 mm 110-085-15150 Bayonet 15,2 2,0 mm 110-085-15200 Bayonet 16,5 0,5 mm 110-085-17050 Bayonet 16,5 1,0 mm 110-085-17100 Bayonet 16,5 1,5 mm 110-085-17150 Bayonet 16,5 2,0 mm 110-085-17200 Bayonet 17,8 0,5 mm 110-085-18050 Bayonet 17,8 1,0 mm 110-085-18100 Bayonet 17,8 1,5 mm 10-085-18150 Bayonet 17,8 2,0 mm 110-085-18200 Bayonet 20,3 0,5 mm 110-085-20050 Bayonet 20,3 1,0 mm 110-085-20100 Bayonet 20,3 1,5 mm 110-085-20150 Bayonet 20,3 2,0 mm 110-085-20200 Bayonet,tip angled right 15,2 0,5 mm 110-095-15050 SINGLE-USE STERILE 96 CHIR/022/15/C

Part number : Manufacturer part number : Sterile GAMMA SINGLE-USE BIPOLAR FORCEPS WITH & WITHOUT GUIDE WITH INTEGRATED CABLE Packaging: box of 10 units ENDING LENGTH TIP PART NUMBERS Bayonet,tip angled right 15,2 1,0 mm 110-095-15100 Bayonet,tip angled right 15,2 1,5 mm 110-095-15150 Bayonet,tip angled right 15,2 2,0 mm 110-095-15200 Bayonet,tip angled right 16,5 0,5 mm 110-095-17050 Bayonet,tip angled right 16,5 1,0 mm 110-095-17100 Bayonet,tip angled right 16,5 1,5 mm 110-095-17150 Bayonet,tip angled right 16,5 2,0 mm 110-095-17200 Bayonet,tip angled right 17,8 0,5 mm 110-095-18050 Bayonet,tip angled right 17,8 1,0 mm 110-095-18100 Bayonet,tip angled right 17,8 1,5 mm 110-095-18150 Bayonet,tip angled right 17,8 2,0 mm 110-095-18200 Bayonet,tip angled right 20,3 0,5 mm 110-095-20050 Bayonet,tip angled right 20,3 1,0 mm 110-095-20100 Bayonet,tip angled right 20,3 1,5 mm 110-095-20150 Bayonet,tip angled right 20,3 2,0 mm 110-095-20200 Bayonet,tip angled left 15,2 0,5 mm 110-105-15050 Bayonet,tip angled left 15,2 1,0 mm 110-105-15100 Bayonet,tip angled left 15,2 1,5 mm 110-105-15150 Bayonet,tip angled left 15,2 2,0 mm 110-105-15200 Bayonet,tip angled left 16,5 0,5 mm 110-105-17050 Bayonet,tip angled left 16,5 1,0 mm 110-105-17100 Bayonet,tip angled left 16,5 1,5 mm 110-105-17150 Bayonet,tip angled left 16,5 2,0 mm 110-105-17200 Bayonet,tip angled left 17,8 0,5 mm 110-105-18050 Bayonet,tip angled left 17,8 1,0 mm 110-105-18100 Bayonet,tip angled left 17,8 1,5 mm 110-105-18150 Bayonet,tip angled left 17,8 2,0 mm 110-105-18200 Bayonet,tip angled left 20,3 0,5 mm 110-105-20050 Bayonet,tip angled left 20,3 1,0 mm 110-105-20100 Bayonet,tip angled left 20,3 1,5 mm 110-105-20150 Bayonet,tip angled left 20,3 2,0 mm 110-105-20200 SINGLE-USE STERILE 97 CHIR/022/15/C

Part number : Non Sterile SINGLE USE ELECTROSURGICAL PADS 2 ZONES UNIVERSAL ELECTROSURGICAL PAD TWIN SAFE Patented concept allowing perfect electrical conductivity Useable in any position without heat increase Total patient safety No burn risk Effective surface : 110 ² Total surface : 170 ² Impedance @ 600 KHz 1.5 Traceability : adhesive labelling detachable, to be used on patient file Refer to page 25 to connect our pads to different generators type Packaging: 2 pads per pouch 50 pads per box 600 pads per parcel 1280-2 98 CHIR/022/15/C

Part number : Non Sterile SINGLE USE ELECTROSURGICAL PADS 2 PARTS - NEONATE ELECTROSURGICAL PAD 2 PARTS Hypoallergenic conductive adhesive gel Adhesif is cellular foam without latex, 1,3 mm height Ring connection, standard 21 mm Conductive surface : 32 ² Total surface : 66 ² Traceability : adhesive labeling detachable, to be used on patient file Refer to page 25 to connect our pads to different generators type Packaging : 1 pad per pouch 25 pads per box 600 pads per parcel 1283-N Packaging : 2 pads per pouch 25 pads per box 600 pads per parcel 1283-2N 99 CHIR/022/15/C

Non Sterile SINGLE USE ELECTROSURGICAL PADS 2 ZONES ADULT/INFANT ELECTROSURURGICAL PAD ADULT / INFANT 2 zones Hydrogel. Cell foam adhesive latex free Conductive surface: 107 ² Total surface : 165 ² Dimensions : 164 x 117 mm Packaging : 1 pad double zone in individual pouch 100 pad per box F7320 100 CHIR/022/15/C

OTHER CATALOGUES AVAILABLE : LARYNGOSCOPE BLADES NIBP CUFFS AND HOSES E.C.G. ACCESSORIES E.C.G. CABLES SENSORS SpO2 SENSORS & CABLES ELECTROSURGERY «IPSet» prewired ELECTRODES