Roloc TM. Discs. Easy to mount easy to change

Transcription

1 Roloc TM Discs Provide a fast, efficient method for deburring, blending, finishing, removing tool marks and die polishing on all types of metals. Resist loading and shelling under severe operating conditions. They lock securely in place with just a half twist a half twist and it s off. Each disc is color coded by grade. Ideal for use on air tools (right angle and straight) and on flexible shaft grinders. Additionally, Roloc discs and pads feature three different types of fastening systems to accommodate most any stock that you may currently have on hand. Easy to mount easy to change 3M coated abrasive and Scotch-Brite Roloc surface conditioning discs feature a threaded male button attached to the back of each disc for quick and easy mounting to a Roloc disc pad. With a quick half-turn, the disc is locked securely in place for the life of the disc. Each button or disc is color coded to designate grade. Proper Speed Tool 3M Roloc Disc Button Color/Grade Chart Roloc System Threaded Shaft Roloc Disc Pad Roloc Disc or Wheel Accessories: Hook and Loop - See pg. 32. Roloc - See pg. 23. Roloc TM Discs Roloc TM TS Discs Roloc TM TP Discs 6

2 4 3M TM 777F Regalite TM Polycut TM Resin Bond Cloth YF Wt. 3M TM 78C Regalite TM Polycut TM Fibre 3M s Regalite Polycut incorporates 3M Cubitron and premium aluminum oxide minerals on a heavy YF cloth or fibre backing. Size Prod. I.D. Pkg./Case P00 P20 " dia. 777F 0/ /2" dia. 777F 0/ " dia. 777F 0/ " dia. 777F 0/ " dia. 78C 2/ Roloc TS Discs " dia. 777F 0/ /2" dia. 777F 0/ " dia. 777F 0/ " dia. 777F 0/ Roloc TP Discs " dia. 777F 0/ /2" dia. 777F 0/ " dia. 777F 0/ " dia. 777F 0/ * Add Prefix 044- to UPC No. when ordering. Kut stock items 7

3 3M TM 977F Regalloy Resin Bond Cloth 3M TM 963G Regal TM Resin Bond Cloth YN Wt. Grades XF Wt. Grades P00 and P20 3M TM 984C Regal TM Resin Bond Fibre All 4" Products 3M s Cubitron ceramic aluminum oxide on a polyester backing for grinding and deburring carbon steel and aluminum. 46 Size Prod. I.D. Pkg./Case P00 P20 " dia. 963G 0/ /2" dia. 963G 0/ " dia. 963G 0/ " dia. 977F 0/ " dia. 963G 0/ " dia. 977F 0/ " dia. 984C 2/ Roloc TS Discs " dia. 963G 0/00 /2" dia. 963G 0/ " dia. 963G 0/ " dia. 963G 0/ Roloc TP Discs " dia. 963G 0/ /2" dia. 963G 0/ " dia. 963G 0/ " dia. 963G 0/ * Add Prefix 044- to UPC No. when ordering. Kut stock items 3M TM 983C Regal TM Resin Bond Fibre Grades 36, 60 and 80 Cubitron mineral coated on a 30 mil fibre backing for aggressive applications where reduced edgewear and firm support is desired. 47 Size Prod. I.D. Pkg./Case P00 2" dia. 983C 0/ " dia. 983C 0/ Roloc TS Discs 2" dia. 983C 0/ " dia. 983C 0/ Roloc TP Discs 2" dia. 983C 0/200 3" dia. 983C 0/ * Add Prefix 044- to UPC No. when ordering. 8

4 3M TM 36F Three-M-ite TM Resin Bond Cloth YF Wt. Grades 24 0, XF Wt. P80 P320 General purpose grinding, blending and deburring on all metals: aluminum oxide on tough, polyester backing. Size Prod. I.D. Pkg./Case P00 P20 P0 P80 P240 P320 " dia. 36F 0/ /2" dia. 36F 0/ " dia. 36F 0/ " dia. 36F 0/ " dia. 36F 2/ Roloc TS Discs " dia. 36F 0/ /2" dia. 36F 0/ " dia. 36F 0/ " dia. 36F 0/ Roloc TP Discs " dia. 36F 0/ /2" dia. 36F 0/ " dia. 36F 0/ " dia. 36F 0/ * Add Prefix 044- to UPC No. when ordering. 48 3M TM 46F Tri-M-ite TM Resin Bond Cloth YF Wt. Tri-M-ite Resin Bond Cloth are silicon carbide on a polyester backing for grinding glass, titanium and nonferrous materials. 49 Size Prod. I.D. Pkg./Case P00 P20 P0 P80 P240 P320 2" dia. 46F 0/ " dia. 46F 0/ * Add Prefix 044- to UPC No. when ordering. Kut stock items 9

5 Roloc TM Surface Conditioning Discs Scotch-Brite Roloc discs provide a burr-free surface suitable for painting or coating. These discs can also be used for removal of light rust, oxides, and coatings. Color: A VFN - Blue A CRS - Brown A MED - Maroon S SFN - Gray Compatability of Roloc TM Disc Attaching System 3M ( / 2 Turn off and on) Screw on Press on Roloc N/A Type III Roloc+ N/A N/A Roloc TP N/A Power Lock Roloc TS Quick Change Type II Roloc TM Roloc TM TS Roloc TM TP 0 Mineral Type/Grade UPC No. Size RPMs Discs/Case A CRS A MED A VFN S SFN Roloc " x NH 30, /2" x NH 30, " x NH 2, " x NH 8, " x NH 2, Roloc TS /2" x NH 30, " x NH 2, " x NH 8, Roloc TP 2" x NH 2, " x NH 8, Roloc TM SE Surface Conditioning Discs Scotch-Brite SE surface conditioning products feature a coarser, tougher, more aggressive, abrasive impregnated web construction than regular Scotch-Brite surface conditioning products. Use for heavier deburring, cleaning and finishing applications. Grade Front Color Back Color A CRS Brown Blue A MED Maroon Blue 28 Mineral Type/Grade UPC No. Size RPMs Discs/Case A CRS A MED Roloc SE 2" x NH 2, " x NH 8, " x NH 2, Roloc TS SE 2" x NH 2, " x NH 8, Roloc TP SE 2" x NH 2, " x NH 8, Maximum Operating RPMs: Do not exceed the MOS ratings of the holders used with these Roloc products. 20 Accessories: See Roloc Disc Pads, pg. 23.

6 EXL Roloc TM Unitized Wheels Roloc unitized wheels are strong, efficient products for edge deburring and finishing. They perform well in a variety of metal working applications and on intricate machined parts where close tolerances are important. The Roloc, Roloc TS, or Roloc+ holding systems make changing unitized wheels quick and easy. Wheel Color Lettering 8A CRS Tan Orange 8A MED Tan Orange 6A MED Tan Red 6S FIN Gray Green 2A MED Gray Black 2S FIN Gray Purple 2 Mineral Type/Grade UPC No.* Size Wheels/Case RPMs 8 A CRS 8 A MED 6 A MED 6 S FIN 2 A MED 2 S FIN EXL RolocUnitized Wheels 2" dia , " dia. 40, EXL RolocTS Unitized Wheels 2" dia , " dia. 40, * Add Prefix to UPC No. when ordering. 2

7 Roloc TM Bristle Discs 3M Roloc Bristle Discs are ideal for safely cleaning and stripping a wide variety of substances off of metal. The 3M Bristle Disc will easily cut through hardened enamel paint, thick dried adhesive and layers of corrosion without destroying the underlying metal or compromising your safety. In addition, the 3M Bristle Disc does not clog-up with the substances you are trying to remove, giving you a consistent finish throughout the life of the disc. 3M Bristle Discs come in sizes from inch Roloc to 7 inch x /8- thread. For hard to reach areas, try the 3 inch Radial 3M Bristle Disc. Most 3M Bristle Discs come in grades 0, 80 and 20. Color: 0X - Green 80X - Yellow 20X - White Mineral: Regalite Mineral 3 Trim Grade and UPC No. Size (T=Tapered) Pkg./Case RPM s " dia. /8" 20/80 30, " dia. /2" 0/40 2, /8"T 0/40 2, " dia. /2" 0/40 8, /8"T 0/40 8, " dia. /8"- Thread /0 2, " dia. /8"- Thread / 6, Maximum Operating RPMs: The lower of the disc or the disc pad MOS rating must always be used. Roloc TM Bristle Discs Introductory Pack Product 982BS 983BS 982RS 983RS Contents 2 ea. Roloc Bristle Disc, 2" x /2" trim, 0x, 80x, 20x ea. Roloc Disc Pad Holder, 2", Hard 2 ea. Roloc Bristle Disc, 3" x /2" trim, 0x, 80x, 20x ea. Roloc Disc Pad Holder, 3", Hard 3 ea. 3M 777F, 2", 60YF, 80YF, 20YF 2 ea. Roloc Surface Conditioning Discs, 2", ACRS, AMED, AVFN, SSFN 2 ea. Roloc SE Surface Conditioning Discs, 2", ACRS ea. Roloc EXL Unitized Wheels, 2", 2SFIN, 6AMED, 8ACRS 2 ea. Roloc Bristle Disc, 2" x /8" tapered, 0x, 80x, 20x ea. Roloc Disc Pad Holder, 2", Hard 3 ea. 3M 777F, 3", 60YF, 80YF, 20YF 2 ea. Roloc Surface Conditioning Discs, 3", ACRS, AMED, AVFN, SSFN 2 ea. Roloc SE Surface Conditioning Discs, 3", ACRS ea. Roloc EXL Unitized Wheels, 3", 2SFIN, 6AMED, 8ACRS 2 ea. Roloc Bristle Disc, 3" x /8" tapered, 0x, 80x, 20x ea. Roloc Disc Pad Holder, 3", Hard Product Packs/Case UPC No. 982BS BS RS

8 Roloc TM Radial Bristle Discs 3M Radial Bristle Discs are abrasive-filled products with unique features designed to increase productivity in the following applications: Remove adhesive, paint and other coatings, discoloration, heavy oxides, and surface contaminants. Deburr and blend. Clean and prepare surfaces before and after welding. Flexible bristles conform to the part and clean without removing base material reducing damage and rework. The unique bristle pattern reaches tight or awkward areas such as grooves and along 90 angles. Trim Grade and UPC No. Size (T=Tapered) Pkg./Case RPM s " dia. 0/40 2, Accessories Roloc TM Discs 3M TM Roloc TM Disc Pads Rubber back-up pads are available in different diameters and degrees of hardness for varying grinding applications. Pads are female threaded to receive any standard /4"- 20 thread shaft. Threaded Disc Roloc Shaft Back-up Pad Disc Proper Speed Tool Diameter Hardness RPM s UPC No. " Medium 30, / 2" Hard 30, / 2" Medium 30, / 2" Soft 30, " Extra Hard 2, " Hard 2, " Medium 2, " Soft 20, " Extra Hard 20, " Hard 20, " Medium 8, " Soft, " / 8" - Hard 2, " Medium 2, / 4" Threaded Shaft M TM Roloc TM TS Disc Pads For use with 3M TS grinding discs and screw on abrasive discs. Diameter Hardness RPM s UPC No. " Medium 30, / 2" Hard 30, / 2" Medium 30, " Extra Hard 2, " Hard 2, " Medium 2, " Extra Hard 20, " Hard 20, " Medium 8, " Soft, " Medium 2, / 4" Threaded Shaft M TM Roloc TM TP Disc Pads For use with 3M TP grinding discs and with press on type abrasive discs. Diameter Hardness RPM s UPC No. " Medium 30, / 2" Hard 30, / 2" Medium 30, / 2" Soft 30, " Hard 2, " Medium 2, " Soft 20, " Extra Hard 20, " Hard 20, " Medium 8, " Soft, " Medium 2, / 4" Threaded Shaft

9 Roloc TM + Buttons These buttons thread into the No. Roloc + Holder for use with unitized wheels. They offer this front-loading feature to allow for quick and easy wheel change. Maximum Product Diameter Use With Oper. RPM 6 3 /8" Unitized Wheels 2,000 w/ /2" dia. /2" - 3" dia. x /8" 20,000 w/2" dia. wide x 3 /8" CH,000 w/3" dia. 7 3 /8" Unitized Wheels 2,000 w/ /2" dia. /2" - 3" dia. x /4" 20,000 w/2" dia. wide x 3 /8" CH,000 w/3" dia Product Buttons/Case UPC No #6 Button is blue, #7 Button is red Additional Helpful Information Coated Abrasive Roloc TM Discs Optimum Tool Speeds (RPM s) To Maximize Roloc TM Coated Abrasive Disc Cut Rates and Life. Disc Size /2" 2" 3" Stainless 20,000 RPM,000 RPM 0,000 RPM Aluminum 20,000 RPM,000 RPM 0,000 RPM 6 Steel 30,000 RPM 20,000 RPM,000 RPM Roloc TM + Holders & Button Combination Packs These combination packs contain one Roloc + Holder No. and one Roloc + Button No. 6 or 7. Product Specifications Product Use With No. and No. 6 Unitized Wheels 3" Diameter and smaller x /8" wide x 3 /8" CH No. and No. 7 Unitized Wheels 3" Diameter and smaller x /4" wide x 3 /8" CH Product Sets/Case UPC No. No. and No No. and No Material Type Titanium 9,000 RPM 7,000 RPM 4,00 RPM Glass 9,000 RPM 7,000 RPM 4,00 RPM Composites,000 RPM 0,000 RPM 8,000 RPM Compatibility of Roloc TM Disc Attaching Systems 3M ( /2 Turn off and on) Press on Screw on Roloc TP TS Type III Power Lock Type II N/A N/A Quick Change 3M Back-up Pad 7 8 Non 3M Back-up Pad WARNING: Use with 3M Roloc Back-up pads for safe, secure performance. Non-3M back-up pads may have a deeper threaded cavity which causes the button to continue to tighten down during use. This can cause the button to separate from the disc resulting in disc fly off and potential operator harm. 24