CORDS & CABLE ASSEMBLIES Standard Simplex/Duplex Patch Cords Overview: FOCONEC supplies full series of standard simplex, duplex patch cords or pigtails, designed for interconnection or cross connection in local fiber transmission networks, data centers, CATV networks, Various kinds of testing and self-control system. With meeting or exceeding industry standards requirements for transmission loss, visual end-face specifications and end-face geometry, FOCONEC offers an economic & competitive advantage for our customers in the market. Standard patch cords are available in OS1(SM),OM1(MM62.5), OM2(MM50), OM3(10Gig) & OM4 fiber types & PVC, OFNR, OFNP or LSZH cable sheath, cover a range of SC, FC, LC, ST,MTRJ,MU,D4 connectors. FOCONEC offer pigtails with diameter of 0.9mm regularly. For special requirement, we could produce pigtails with 0.2mm or 0.3mm diameter. Except normal transmission loss test, FOCONEC also offers optional 100% interferometer testing as customer required. Customized solutions on connector types, cable lengths, cable colors, labeling & packaging are also available. SC/PC-SC/PC SM Duplex with Clipper FC/APC-FC/APC SM Duplex Full range of SC/ST/FC/LC/MTRJ/DIN/MU/D4/SMA/LX.5 connectors available UL certificated cable with Corning fiber available More cable diameters for option: 0.9mm, 1.6mm, 1.8mm, 2.0mm, 3.0mm Custom cable colors available 100% factory tested for insertion loss and return loss(singlemode) 3D test available as customer request WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286 1
Technical Parameters: Color Codes: Connectors SC/ST/FC/LC/MTRJ/DIN/MU/LX.5/D4/SMA Optical Fiber SM 9/125(OS1) MM 62.5/125(OM1), 50/125(OM2), MM 10Gig(OM3), OM4 Cable Jackets PVC, OFNR(Riser), OFNP(Plenum), LSZH(Low Smoking Zero Halogen) Simplex/Duplex Cable Diameter 0.9mm, 1.6mm, 1.8mm, 2.0mm, 3.0mm IL(Max.) 0.3dB Optical Spec PC 45dB, UPC 50 db, RL 31dB APC 60dB Ferrule Ceramic Repeatability 0.2dB 1,000 times mating cycles Working Temperature -25 C - +75 C Storage Temperature -45 C - +85 C Cable Jackets Single-mode Yellow Multimode (62.5/125μm or 50/125μm) Orange Laser optimized OM3/OM4(50/125μm) Aqua Connectors Single-mode Blue Single-mode, APC (angle polishing) Green Multimode (62.5/125μm or 50/125μm) Beige Laser optimized OM3/OM4(50/125μm) Beige Boots (Polarity defined by the following color scheme) Single-Mode SC/FC/ST Blue & White Multimode SC/FC/ST Black & Red Attention: All LC duplex Connectors are with White & White boots, the polarity will be defined by the shrink tubes (Yellow & White) on the Connectors Cable Structure: Out Jacket Corning Fiber Tight Buffer Multimode Tigh Buffer 0.9mm Cable Singlemode Duplex Zip Cable Tight Buffer Layer Aramid Yarns Cable Jacket Out Jacket Tight Buffer Layer Aramid Yarns Cable Jacket MM 10Gig(OM3) Duplex Zip Cable 2 WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286
Order Guide: Cable Type SX Simplex DX Duplex Jacket Material P PVC PR PVC Riser Rated (OFNR) PL Plenum Rated (OFNP) LS Low Smoke Zero Halogen (LSZH) FOCPC- Cable Length 1M~999M 1F~999F Meter Feet 1st End Termination LC LC SC SC FC FC ST ST MTRJ MTRJ Female MTRJM MTRJ Male DIN DIN D4 D4 MU MU LX LX.5 2nd End Termination X No Termination (Pigtail) LC SC FC ST MTRJ MTRJM DIN D4 MU LX LC SC FC ST MTRJ Female MTRJ Male DIN D4 MU LX.5 Fiber Type SM Singlemode 9/125 SBI SM Bend Insensitive M1 MM 62.5/125 M2 MM 50/125 M3 MM OM3 (10Gig) M4 MM OM4 Attentions: Cable Diameter available: 0.9mm, 1.6mm, 2.0mm, 3.0mm Patch cords with LC, MTRJ or MU Connectors terminated at one or both ends will be built on cables with 2.0mm diameter. For patch cords with LC, SC connectors terminated, CLIPPER will be available according to customer requirement. Order Example: FOCPC-LCU-SCU-M3-DX-LSZH-35F Fiber Optic Patch Cord, LC/UPC to SC/UPC, MM OM3(10Gig), Duplex, Low Smoke Zero Halogen 2.0mm Cable, 35 Foot Length WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286 3
CORDS & CABLE ASSEMBLIES Multistrand factory pre-terminated patch cables Overview: FOCONEC offers factory pre-terminated Multistrand cable assemblies, terminate a wide range of trunk/distribution, ribbon and indoor/outdoor cables with same or dicrete connectors at both ends or only one end(leave one end open for on-site splicing). All patch cables could be used for backbone cabling and Plug-and- Play cabling system, features high-density, factory terminated, factory tested simple installation and cost effective. For trunk cables build on 900um inner fibers, we not only directly terminate connectors with 0.9mm fan out, also terminate connectors with 2.0mm fan out by using Breakout Kits and 2.0mm protection tubing to each fibers. Pre-mounted Pulling Eye enable extremely easy handling during drawing or laying. All multisrtrand patch cables can be supplied on spools directly for easy drawing & installation. MM 50/125um(OM2) 24 Fiber Trunk Patch Cable with 2.0mm Breakout Factory pre-terminated, eliminates the need for field terminations or splices, optimize optical performance Reduce installation time & save on-site labor cost Multi-fiber solutions from 4 fiber up to 144 fibers Single-mode 9/125, Multimode 50/125 or 62.5/125, Multimode 10Gig fiber cable for option Full Range of SC, LC, ST, FC, MTRJ, MU, DIN, D4 connectors available PC (Physical Contact), UPC (Ultra Physical Contact) or APC (Angled Physical Contact) connector end-face polish available 100% factory tested with complete test results Customized length, staggering, connector type, fanout style, and labeling Pulling eye available for connecter protection, on-site easy and quick installation SM 144 Fiber Trunk Patch Cable With 2.0mm Breakout MM 10Gig Laser Optimized Trunk Patch Cable 4 WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286
Structure of Trunk Cable: Individual 900 μm fibers make up the construction of TRUNK cable. The fibers are bundled into subunits of 6-(24F), 8-(48F) or 12-fibers each. Each subunit is identified and the individual fibers within the subunits are color-coded. center strength member tape outer sheath fiber tight layer aramid yarns sheath Technical Parameters: Connectors Ferrule SC/ST/FC/LC/MTRJ/DIN/MU/LX.5/D4/SMA Ceramic Optical Fiber SM 9/125 MM 62.5/125(OM1), MM 50/125(OM2), MM 10Gig(OM3), OM4 Cable Jackets PVC, OFNR(Riser), OFNP(Plenum), LSZH(Low Smoking Zero Halogen) Cable Strand 2, 4, 6, 8, 12, 24, 48, 72, 96, 144 Fiber IL(Max.) 0.3dB Optical PC 45dB UPC 50 Spec RL 30dB db APC 60dB Repeatability 0.2dB 1,000 times mating cycles Working Temperature -25 C- +75 C Storage Temperature -45 C - +85 C Structure of Flat Ribbon Cable: optical fiber ribbon aramid yarns sheath Ribbon 12 Fiber Cable Singlemode Individual 250 μm bare fibers are constructed as a ribbon, each fiber color coded. Then the ribbon fibers are packed in one outer flat ribbon Jacket. SM 12 Fiber Ribbbon Patch Cable with 2.omm Breakout WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286 5
Order Guide: 2nd End Termination X No Termination (Pigtail) LC SC FC ST MTRJ MTRJM DIN D4 MU LX LC SC FC ST MTRJ Female MTRJ Male DIN D4 MU LX.5 P PC Cable Type TR Trunk Riser Rated (OFNR) TP Trunk Plenum Rated (OFNP) TL Trunk Low Smoke Zero Halogen (LSZH) RR Ribbon Riser Rated RL Ribbon LSZH IO Indoor/Outdoor Cable Length 001M~999M Meter 003F~999F Feet FOCMPC- 1st End Termination LC LC SC SC FC FC ST ST MTRJ MTRJ Female MTRJM MTRJ Male DIN DIN D4 D4 MU MU LX LX.5 P PC Fiber Type SM Singlemode 9/125 SBI SM Bend Insensitive M1 MM 62.5/125 M2 MM 50/125 M3 MM OM3 (10Gig) Fiber Counts 02F 2 fibers Round 04F 06F 08F 12F 24F 48F 72F 144F 4 Fibers 6 Fibers 8 Fibers 12 Fibers 24 Fibers 48 Fibers 72 Fiber 144 Fibers Attention: Before order placed, the following points should be confirmed by our sales: Cable type and stock? Fan out length? Fan out diameter? Staggered or not? For LC or SC termination, need clipper or not? Pulling Eyes? Order Example: FOCMPC-LCU-MTRJM-SM-TR-24F-09M Multistrand Patch Cable, LC/UPC to MTRJ Male, SM 9/125(OS1), Trunk Riser Rated(OFNR) Cable, 24 Fibers, 9 Meters Length Cable type and stock: Available Breakout length: 12 Foot Breakout diameter: 0.9mm LC end, 2.0mm MTRJ end Staggered or not: same breakou length Pulling Eyes: only at LC end 6 WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286
Drawing: LC to ST 24 Fiber Patch Cable with LC End Staggered Fan out, ST End Same Length Fan Out, LC end with Clipper, Both Ends with 2.0mm Breakout CORDS & CABLE ASSEMBLIES MTP/MPO Factory Pre-terminated Cable Assemblies MTP/MPO Interconnect Patch Cables MTP/MPO Interconnect Patch Cables was terminated 12 fiber ribbon and 12 fiber mini round cable, using precision molded compatible ferrule which connects 8 or 12 fibers. Alignment between mating MTP/MPO ferrules is accomplished using two precision guide pins that are pre-installed into the designated male connector. Factory pre-terminated, eliminates the need for field terminations or splices Corning fiber available for optimized optical performance Riser rated, plenum rated and LSZH cable for option 8 or 12 channels terminated Single-mode, Multimode 50/125 or 62.5/125, Multimode 10Gig optimized fiber cable available 100% factory tested with complete test results WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286 7
Technical Parameters: Items Single-mode (APC) Multimode(50/125,62.5/125 or 10Gig) IL of Standard Type Typical 0.35dB 0.35dB Max 0.7dB 0.7dB IL of Low-loss Type Typical 0.25dB Max 0.5dB Return Loss Min 45dB Durability 500 mating cycles, 0.3dB Change Vibration 10 to 55 Hz, 0.3dB Change Thermal Aging 14 days @ +85 C, 0.3dB Change Humidity 95% Rh @ +60 C, 0.3dB Change Temperature Cycling -40 C to +80 C, 0.3dB Change Temperature of Storage -40 C to +80 C MTP/MPO Trunk Pre-terminated MTP/MPO Trunk pre-terminated patch cables are designed for high density Data Center Applications, builed on plenum, riser, and LSZH cables with 12, 24, 36, 72, 96 and 144 fiber counts in sub-units of 12 fibers each. All MTP/MPO patch cords could be available in customized total lengths with same or staggered fan out length. Total trunk length will be specified from connector end face to connector end face. All our trunk patch cords will be factory pre-terminated and tested with complete test document available upon request. Pulling Eyes are optional on the pulling end of all trunks to protect fibers during drawing and installation. Structure of Mini Trunk Cable: Individual 250 μm bare fibers make up the construction of mini TRUNK cable. The fibers are bundled into subunits of 12-fibers each. Each subunit is identified and the individual fibers within the subunits are color-coded. Bare Fiber Central Strength Member Aramid Yarns Gird Single-mode 72 Fiber cable with each 12 bare fibers in one Sub Unit Outer Sheath Factory pre-terminated, optimized optical performance Reduce installation time & save on-site labor cost 12, 24, 36, 72, 96 and 144 strands in sub-units of 12 fibers, high density structure Single-mode 9/125, Multimode 50/125 or 62.5/125, Multimode 10Gig optimized fiber cable available 8 WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286
Customized length, staggering or breakout stylye, and serial number labeling, easy to install and manage 100% factory tested with full test results included Pulling eye available for connecter protection, easy for tunnel pulling and backbone cabling Order Guide: Input/Ouput 1st End Connector 2ed End Connector Fiber Type Fiber Counts Cable Type Length MTP MTP Female X Pigtail SM Single-mode 9/125 12 12Fiber TR Trunk OFNR 001M~999M Meters MTPM MTP Male MTP MTP Female M1 Multimode 62.5/125 24 24 Fiber TP Trunk OFNP 001~999F Feet MPO MPO Female MTPM MTP Male M2 Multimode 50/125 48 48 Fiber TL Trunk LSZH MPOM MPO Male MPO MPO Female M3 Multimode OM3 72 72 Fiber MPOM MPO Male 144 144 Fiber Order Example: FOCFC- MPOM - MPO - M3-48 - TL - 3M MTP/MPO Harness Patch Cables MTP/MPO harnesses patch cables are terminated with MTP/MPO connector on one end and standard LC, FC, SC, ST, MTRJ connectors on other end to meet a variety of fiber cabling requirements. All patch cable are factory pre-terminated, tested, and are widely used to connect with the current installed base of transmitters, receivers, patch panels and MTP/MPO cassettes. These MTP/MPO patch cables are available in single-mode, multimode and multimode laser optimized. Harnesses cables can be customized with any connector style and in any length to meet specific installation environment. Factory pre-terminated, eliminates the need for field terminations or splices, reduce installation time & save onsite labor cost MTP/MPO to dicrete connectors(sc,lc,fc,st,mtrj) Customized length, staggering 0.9mm or 2.0mm breakout style Standard length and serial number labeling, easy to install and manage 100% factory tested and complete test results available for each patch cable WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286 9
Key Up Blue Orange Green Brown Gray White Red Black Yellow Voilet Pink Aqua Fiber Orientation of MTP/MPO Connectors Order Guide: 2nd End Termination LC LC SC SC FC FC ST ST MTRJ MTRJ Female MTRJM MTRJ Male P PC Cable Type TR Trunk Riser Rated (OFNR) TP Trunk Plenum Rated (OFNP) TL Trunk Low Smoke Zero Halogen (LSZH) RR Ribbon Riser Rated RL Ribbon LSZH FOCMTH- Cable Length 001M~999M Meter 003F~999F Feet 1st End Termination MTP MTP Female MTPM MTRJ Male MPO MPO Female MPOM MPO Male Fiber Type SM Singlemode 9/125 SBI SM Bend Insensitive M1 MM 62.5/125 M2 MM 50/125 M3 MM OM3 (10Gig) Fiber Counts 08F 8 Fibers 12F 12 Fibers Order Example: FOCMTH-MPOM-LCU-M3-RL-12F-003F MTP to LC/UPC Harness Patch Cable, MM 10Gig(OM3) optimized, LSZH Ribbon Cable, 12 Fibers, 3 Foot Length 10 WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286
CORDS & CABLE ASSEMBLIES Drop Cable Assemblies Cable Structure: Order Guide: 0.5mm FRP strength member optical fiber sheath 2nd End Termination X No Termination (Pigtail) LC LC SC SC FC FC ST ST With increasing popularity and promotion of FTTH construction, drop cables built on Singlemode G.657.A1 fiber core began widely used in corridor, households environment. As one entering fiber optic cable, drop cable is suitable for application of outdoor to indoor connection and terminal installation requiring smaller cable bending. According to the way of cable installation, we could factory preterminate connectors in one end or both ends on drop cabs. Compared to fast connector, drop cable patch cords have higher optical stability and service life. P PC Flame retardant LSZH sheath and self Supporting structure Increase metal suspension on usual drop cable structure, ensure stable performance G.657. A1 fiber adopted, small bending radius guaranteed, fine flexural performance Full Series of connectors and different length according to installation needs. Fiber Counts 01F 1 Fiber 02F 2 Fibers 04F 4 Fibers 06F 6 Fibers 08F 8 Fibers Cable Length 001M~999M Meter 003F~999F Feet FOCDPC- 1st End Termination LC LC SC SC FC FC ST ST P PC Fiber Type SM SM Bend Insensitive G657.A1 Cable Color B Black W White Order Example: FOCDPC-SCU-SCU-SM-01F-B-003M Drop Patch Cord, Singlemode, Simplex, LSZH Cable, Black, 3 Meters Length WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286 11
CORDS & CABLE ASSEMBLIES Mode conditioning patch cords Mode conditioning patch cords are required where Gigabit 1000 Base-LX routers and switches are installed into existing multimode cable plants. These specialized cords help avoid Differential Mode Delay (DMD) effects that can occur when long wave transceiver modules operate at both single-mode and multimode wavelengths. The mode conditioning patch cord causes the single-mode transceiver to create a launch similar to a typical multimode launch Compliant with IEEE802.3z Well control of DMD phenomenon Low Insertion Loss (<0.5dB) Available in MM 62.5/125, 50/125 and OM3 fiber Technical Paremeters: Parameters 62.5mm MMF 50mm MMF Max. of Insertion Loss(dB) 0.5 Optic Center Offset Between SMF & MMF(mm) 17~23 10~16 Axes Angular Offset( ) 1 Radius of Curvature(mm) 10~25(SC, FC, ST); 7~25(LC, MU) Planar Fiber Height(nm) -10~200 Apex Offset(μm) 50 Fiber Ferrule Roughness(nm) 50 Length Tolerence(cm) L+10/-0 Connectors Available SC/FC/LC/ST/MTRJ/MU Order Guide: Single-mode End Multimode End Fiber Type Input/Ouput Length SC SC M1 Multimode 62.5/125 1M LC LC M2 Multimode 50/125 2M FC FC M3 Multimode OM3 3M ST ST Specified MTRJ MTRJ MU MU Order Example: FOCFC- LC - SC - M1-2M 12 WWW.FOCONEC.COM / INT'L SALES: +86.137.0895.9286