Additional Instruction Note: a. Please connect the camera with 2.4G WIFI router or Ethernet cable, can t support 5G router. b. For first time wifi connection, please put your mobile close to camera within one meter. c. If you meet the problem that the file can t open during download the YYP2P by mobile, Suggest download it by PC first, then move the file to smart phone and install it. d. TF card must be inserted when power off, not in power on working mode Quick Guideline Step 1: Download android or IOS Mobile App from www.yyp2p.cn and install it. Note: CMS for computer monitor Step 2: Register new user and login Step 3: Add camera into mobile app and connect camera with Internet via wired Ethernet cable or WIFI Step 4: Change password and Watch the video from mobile App Step 5: Add wireless alarm sensors and remotes into camera via mobile App. Step 6: Press lock key of mobile app or remote controller to arm the system. Step 7:Trigger sensors to make alarm, such as separate door sensor with its magnetic part, walk around in the detection area of infrared PIR detector etc. And then siren makes alarm sound and mobile app receive alarm message. Step8: Press unlock key of mobile app or remote controller to stop the alarm. Note: If you order IP camera without alarm accessories, you don t need to do step 5.6.7.8. If you would like to add some alarm sensors for burglarproof in future, please order them additionally. Step9: If you would like to watch the video via computer, please download CMS from www.yyp2p.cn, then login it and add your cameras. Step10: Please read the FAQ if you meet problem during operation. Please contact technical support e-mail 15014097067@139.com for technical support if the FAQ can t still resolve your problem. Thanks Operation 1. How to add and connect camera with WIFI via Mobile App? Method 1: Set WIFI via smartlink -----click + ---- smart link, then the app will speak "connect the equipment, wait for the di di di sound, then click next----show your wifi name and input password 123----then device speak"connection" Note: Please make sure your mobile phone and camera are connecting to same wifi router for first use so that the camera can be connected to internet. For details, please check the color printing booklet of IP camera. Method2: Set WIFI via wired Ethernet cable. Connect Ethernet cable--app Discover new device--new device List--input device password---video Online---Set--Network Settings---WIFI List Choose your WIFI---Input correct WIFI password---wifi Connected ---Disconnect Ethernet Cable 1
Note: After finish WIFI setting, please DISCONNECT cable, then check whether video is still there or not. If yes, it means connecting WIFI successfully. If Wired cable & WIFI connecting at same time, the camera will work with cable prior to WIFI. Please disconnect cable if want WIFI. Please Install the camera in some place with good wifi signal 2. Change password and Watch the video via mobile App 1.2.3.4 are four preset positions for future development. There are three video modes for option,ld,sd,hd. Please choose HD mode for getting best video quality 3. How to Add wireless alarm sensors? Click Set ---Defense Area Settings---Defense Area 2
3.1 How to Add Remotes and panic button? Defense Area Remote Control 3.2 How to Add Infrared PIR Motion Detector? Defense Area Hall or Bedroom 3.3 How to Add other wireless alarm sensors? *Please follow same coding method above to add other wireless sensors. *Normally add wireless door/window magnetic sensors to window or door lock defense area, pir motion sensors to hall or bedroom area, add gas leak or smoke detectors to Kitchen defense area, add wireless beam/fence detectors or outdoor PIR sensors to Balcony or courtyard defense area, add other wireless sensors to other area, add remote or panic button to remote control area. * The device can code total 8pcs remotes or panic button. *The device has 8 types of defense areas, each area can hold 8pcs wireless sensors, total 64pcs 4. How to Arm/Disarm the system? User can arm/disarm the system with remote control or via mobile app Press LOCK key on remote to arm the system, press UNLOCK key to disarm it, press SOS key to trigger a emergency help alarm, press SOS key again to stop the emergency alarm. Note: The device with Exist Delay function. It will delay about 10 seconds to Arm the system when lock it with 3
remote so that user has time to exist the house before triggering an alarm. 5. How to trigger an alarm? Arm the IP camera system with remotes or via mobile app when go away. When intruder open the door or window, walk through the detection area of PIR motion sensors, press test button of smoke detector etc., the siren built in camera will sound immediately, at same time camera push alarm message to YYP2P Mobile App. (Note: Please set Receive Alarm Message to be on under the Alarm Setting Menu) The camera will record alarm videos into TF card automatically for 1 minutes, 2 minutes or 3 minutes For android: 6. Other setting of mobile App 4
7. How can I watch the video via computer (PC) Note: CMS is for PC monitor, the default login name is admin, password is 00000000 7.1 Download CMS software from www.yyp2p.cn and install CMSSetup 7.2 After install the CMS software, you can see login page, please choose language English, 5
8.How to do factory reset? Please note after you connect with the power, please press down the reset key and not release it (for more than 3 seconds) until you hear a sound like pulling a knife. For a while, you will hear the device sounding "di di di di di..." to remind you connecting to wifi for 3 to 5 minutes. Please connect the wifi during the device di di di di di--- If you not connect WIFI successfully or forgot password, please do factory reset to re-connect WIFI. Note: If you press down reset key for only one second, then release it immediately, the camera change to be AP Mode that can t connect to internet. AP mode is a new function of the camera that engineer is developing. Please contact us if you would like to use the function in future. FAQ 1. Why is the mobile app & PC software introduced in the manual guide is with some difference from the actual one I download? Answer: Please note my company always keeps updating the product and software. The one you download is latest version. This is why there are some differences. 2. I am unhappy. The alarm sensors and remotes are not working, can t make alarm, No alarm messages. Answer: Please don t worry. The following is possible reasons: a. Please note you must code the alarm sensors with IP camera. For details, please check Point 3: How to add wireless alarm sensors? b. You coded it, but maybe not add the sensor successfully because of poor WIFI signal. Please delete it first, then code it again. c. Each defense zone can code 8pcs wireless sensors Max, maybe the defense zone have 8pcs there, you can't code more in the defense zone. c. Did you turn on the receive alarm message function? Please click Settings---Find Alarm Settings & Click it---turn on Receive alarm message d. Please make sure your mobile link with internet, mobile app logined and is running in background or is open. e. Did you lock the system via mobile app or remotes? Please arm the system according to Point 3.How to Arm/Disarm the system? f. If you find the alarm sensors no power: For door sensor, normally we put a small plastic shim between battery and battery slot to stop power loss, please open the door sensor, then remove the shim and re-install the battery; We put battery inside PIR sensor, but disconnected. Please open the case of PIR, then install the battery and switch on battery. 3. My house is big, the wireless distance between alarm sensors and IP cam is too short, what should I do? a. Please extend the antenna of remotes, door sensors, PIR sensors etc. to be Max b. If still not enough, please contact us to add wireless 433MHZ signal repeater. 4. When alarm triggered, I only receive a text message, but camera siren is mute, no alarm sound? Answer: Did you turn on the Siren Buzzer and adjust volume in media setting? Please turn on the alarm buzzer and adjust the volume. Click Alarm Settings---Turn on Buzzer----Choose Siren Buzzer Time: 1, 2 or 3 minutes Click Settings---Find Media Settings---Adjust Volume of Siren sound For details, please check picture guide as below 6
5.When alarm triggered, I can receive text message and hear siren sound from camera, but no any sound to remind me there is alarm message in my mobile app. It is mute. Answer: a. Please don t worry, please turn on the alarm message sound reminder as follows (Only for android system) b. For IOS system, please click mobile Setting---Find Installed YYP2P from Setting---Click YYP2P---Turn On Microphone and set Notifications as below. Note: a. If you are running the app in background, Iphone will push you an alarm message with sound alert when alarm triggered. Please note the alert sound type is synchronous with the default one of Iphone automatically. Iphone company prohibit other App change it. b. If the YYP2P is open(you can see the APP interface on screen), an alarm message will pop up on the YYP2P screen automatically when there is alarm triggered, but without alert sound, because Iphone company prohibit other app use the message sound push function. Thanks for your kind understanding. 6.The camera make alarm in 24hours, very boring. What should I do? Answer: Did you press unlock key of app or remote to stop the alarming? Please disarm the system. 7. When should I arm(lock) the system and disarm it? Answer: When family member stay at home, please unlock (disarm) the system to avoid the system make alarm. When go away, please arm it so that your house in guarding protection, and can make alarm when somebody broken into your house. 8.The alarm system make false alarm sometimes, how to reduce the false alarm? Answer: Please do as below to reduce the false alarm as possible as you can. a. Suggest to turn off motion detection of IP Cam: Motion detection is not equal to Infrared PIR detector. 7
Working principle of motion detection: Software compares the difference of last frame to the current frame. Based on the working principle, the motion detection of all types of IP cameras in whole market is easy to make false alarm sometimes because of changes in the surrounding environment, such as sunny and windy from window or door, Temperature changed suddenly, some object drop from table to floor, turn on/off light etc, b. The Camera come with extra alarm sensors---infrared PIR motion detectors that mainly detecting human movement. Please use PIR detector instead of motion detection. c. Adjust the installation Direction of PIR Detector: 1)Please avoid to install the PIR sensor facing to window, door, corridor, windy, sunny etc. In other word, please install the PIR sensor in the room or hall, but not face to window, door, windy, sunlight etc. 2)Please not install two PIR sensors in one room or one hall. If your hall is very big, and have to install two PIR sensors, please not install them face to face, not cover the detection area each other. 3)Not install the PIR sensor face to camera lens. 4)Please avoid to install the PIR sensor near to the household electric appliances that will produce strong interference, such as TV set, refrigerator, microwave oven etc. 5)Please avoid pet animals stay at home to trigger the Alarm. If you have pet, please choose pet immune wireless PIR detector. 6)Adjust the direction and distance to the suitable position and then fix the sensor on the wall or the furniture. PIR can only be installed in the room/hall, not face the sunlight and windy. The location of installation would affect the accuracy of detection. 9.Except for YYP2P, is the device compatible with other software App? Answer: Yes, it is also compatible with YOOSEE. 8