PROGETTI DI NORMA ISO IN INCHIESTA Allegato al n. 4 di UNInotizie del 28 febbraio 2013 PROGETTI ISO AL VOTO PRELIMINARE I progetti ISO in inchiesta pubblica possono essere acquistati contattando l Ufficio Diffusione: fax 02 5515256 - email: diffusione@uni.com Period from 1 January to 31 January 2013 * Available in English only Materials for the production of primary aluminium ISO/DIS 10143* Carbonaceous materials for the production of aluminium Calcined coke for electrodes Determination of the electrical resistivity of granules (Revision of ISO 10143:1995) Data di scadenza: 2013-04-29 Mechanical testing of metals ISO/DIS 16808* Metallic materials Sheet and strip Determination of biaxial stress-strain curve ny means of bulge test with optical measuring systems ISO/DIS 16842* Metallic materials Sheet and strip Biaxial tensile testing method using cruciform specimen Data di scadenza: 2013-04-11 ISO/DIS 17340* Metallic materials Ductility testing High speed compression test for porous and cellular metals Data di scadenza: 2013-04-06 Non-destructive testing ISO/DIS 12715* Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams (Revision of ISO 12715:1999) Data di scadenza: 2013-04-11 Nuclear energy, nuclear technologies and radiological protection ISO/ASTM DIS 51275* Practice for use of a radiochromic film dosimetry system (Revision of ISO/ASTM 51275:2004) ISO/ASTM DIS 51607* Practice for use of the alanine-epr dosimetry system (Revision of ISO/ASTM 51607:2004) 1
ISO/ASTM DIS 51650* Practice for use of a cellulose triacetate dosimetry system (Revision of ISO/ASTM 51650:2005) ISO/ASTM DIS 51818* Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 kev (Revision of ISO/ASTM 51818:2009) Paper, board and pulps ISO/DIS 14453* Pulps Determination of acetone-soluble matter (Revision of ISO 14453:1997) ISO/DIS 12625-3* Tissue paper and tissue products Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (Revision of ISO 12625-3:2005) Plastics ISO/DIS 16365-1* Plastics Thermoplastic polyurethanes for moulding and extrusion Part 1: Designation system and basis for specifications ISO/DIS 16365-2* Plastics Thermoplastic polyurethanes for moulding and extrusion Part 2: Preparation of test specimens and determination of properties ISO/DIS 16365-3* Plastics Thermoplastic polyurethanes for moulding and extrusion Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content Road vehicles ISO/DIS 8820-5* Road vehicles Fuse-links Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures (Revision of ISO 8820-5:2007) Data di scadenza: 2013-04-10 ISO/DIS 15031-7* Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 7: Data link security (Revision of ISO 15031-7:2001) Data di scadenza: 2013-04-08 ISO/DIS 16552* Heavy commercial vehicles and buses Stopping distance in straight-line braking with ABS Open loop and closed loop test methods ISO/DIS 15007-1* Road vehicles Measurement of driver visual behaviour with respect to transport information and control systems Part 1: Definitions and parameters (Revision of ISO 15007-1:2002) ISO/DIS 12614-1* Road vehicles Liquefied natural gas (LNG) fuel system components Part 1: General requirements and definitions ISO/DIS 12614-2* Road vehicles Liquefied natural gas (LNG) fuel system components Part 2: Performance and general test methods 2
ISO/DIS 12614-3* Road vehicles Liquefied natural gas (LNG) fuel system components Part 3: Check valve ISO/DIS 12614-4* Road vehicles Liquefied natural gas (LNG) fuel system components Part 4: Manual valve ISO/DIS 12614-5* Road vehicles Liquefied natural gas (LNG) fuel system components Part 5: Tank pressure gauge ISO/DIS 12614-6* Road vehicles Liquefied natural gas (LNG) fuel system components Part 6: Overpressure regulator ISO/DIS 12614-7* Road vehicles Liquefied natural gas (LNG) fuel system components Part 7: Pressure relief valve ISO/DIS 12614-8* Road vehicles Liquefied natural gas (LNG) fuel system components Part 8: Excess flow valve ISO/DIS 12614-9* Road vehicles Liquefied natural gas (LNG) fuel system components Part 9: Gas-tight housing and ventilation hose ISO/DIS 12614-10* Road vehicles Liquefied natural gas (LNG) fuel system components Part 10: Rigid fuel line in stainless steel ISO/DIS 12614-11* Road vehicles Liquefied natural gas (LNG) fuel system components Part 11: Fittings ISO/DIS 12614-12* Road vehicles Liquefied natural gas (LNG) fuel system components Part 12: Rigid fuel line in material other than stainless steel ISO/DIS 12614-13* Road vehicles Liquefied natural gas (LNG) fuel system components Part 13: Pressure control regulator ISO/DIS 12614-14* Road vehicles Liquefied natural gas (LNG) fuel system components Part 14: Differential pressure fuel content gauge ISO/DIS 12614-15* Road vehicles Liquefied natural gas (LNG) fuel system components Part 15: Capacitance fuel content gauge ISO/DIS 12614-16* Road vehicles Liquefied natural gas (LNG) fuel system components Part 16: Heat exchanger - vaporizer ISO/DIS 12614-17* Road vehicles Liquefied natural gas (LNG) fuel system components Part 17: Natural gas detector 3
ISO/DIS 12614-18* Road vehicles Liquefied natural gas (LNG) fuel system components Part 18: Gas temperature sensor ISO/DIS 16380* Road Vehicles Blended Fuels Refuelling Connector Data di scadenza: 2013-04-13 Rolling bearings ISO 10317:2008/DAmd 1* Rolling bearings Tapered roller bearings Designation system Amendment 1 Data di scadenza: 2013-04-30 Ships and marine technology ISO/DIS 17357-1* Ships and marine technology - Floating pneumatic rubber fenders Part 1: High pressure (Revision of ISO 17357:2002, ISO/NP 17357) Data di scadenza: 2013-04-14 ISO/DIS 17357-2* Ships and marine technology - Floating pneumatic rubber fenders Part 2: Low pressure (Revision of ISO 17357:2002, ISO/NP 17357) Data di scadenza: 2013-04-14 ISO/DIS 14886* Ships and marine technology - Large Yachts - Structural fire protection for FRP yachts Societal security ISO/DIS 22322* Societal security Emergency management Public warning Data di scadenza: 2013-04-10 Solid biofuels ISO/DIS 16559* Solid biofuels Terminology, definitions and descriptions ISO/DIS 16948* Solid biofuels Determination of total content of carbon, hydrogen and nitrogen ISO/DIS 16967* Solid biofuels Determination of major elements ISO/DIS 16968* Solid biofuels Determination of minor elements Sports and recreational equipment ISO/DIS 9523* Touring ski-boots for adults Interface with touring ski-bindings Requirements and test methods (Revision of ISO 9523:2008) Steel ISO/DIS 5002* Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities (Revision of ISO 5002:2008) Data di scadenza: 2013-05-01 4
Textile machinery and accessories ISO/DIS 21485* Textile machinery Draw frame for cotton spinning Vocabulary and principles of construction (Revision of ISO 21485:2006) Data di scadenza: 2013-04-25 ISO 9902-1:2001/DAmd 2* Textile machinery Noise test code Part 1: Common requirements Amendment 2 ISO 9902-2:2001/DAmd 2* Textile machinery Noise test code Part 2: Spinning preparatory and spinning machinery Amendment 2 ISO 9902-3:2001/DAmd 2* Textile machinery Noise test code Part 3: Nonwoven machinery Amendment 2 ISO 9902-4:2001/DAmd 2* Textile machinery Noise test code Part 4: Yarn processing, cordage and rope manufacturing machinery Amendment 2 ISO 9902-5:2001/DAmd 2* Textile machinery Noise test code Part 5: Weaving and knitting preparatory machinery Amendment 2 ISO 9902-6:2001/DAmd 2* Textile machinery Noise test code Part 6: Fabric manufacturing machinery Amendment 2 ISO 9902-7:2001/DAmd 2* Textile machinery Noise test code Part 7: Dyeing and finishing machinery Amendment 2 Timber structures ISO/DIS 10983* Timber Finger joints Minimum production requirements and testing methods (Revision of ISO 10983:1999) Data di scadenza: 2013-04-29 ISO/DIS 17754* Torsional resistance of driving in screws Data di scadenza: 2013-04-25 Tobacco and tobacco products ISO/DIS 3550-3* Cigarettes Determination of loss of tobacco from the ends Part 3: Method using a vibrobench Tractors and machinery for agriculture and forestry ISO/DIS 16122-1.2* Agricultural and forestry machinery Inspection of sprayers in use Part 1: General ISO/DIS 16122-2.2* Agricultural and forestry machinery Inspection of sprayers in use Part 2: Horizontal boom sprayers 5
ISO/DIS 16122-3.2* Agricultural and forestry machinery Inspection of sprayers in use Part 3: Vertical boom sprayers, mistblowers and similar Tyres, rims and valves ISO/DIS 5775-2* Bicycle tyres and rims Part 2: Rims (Revision of ISO 5775-2:1996, ISO 5775-2:1996/Amd 1:2001) Data di scadenza: 2013-04-09 Water quality ISO/DIS 5667-6* Water quality Sampling Part 6: Guidance on sampling of rivers and streams (Revision of ISO 5667-6:2005) Data di scadenza: 2013-04-14 Welding and allied processes ISO/DIS 23277* Non-destructive testing of welds Penetrant testing of welds Acceptance levels (Revision of ISO 23277:2006) Data di scadenza: 2013-06-25 ISO/DIS 23278* Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels (Revision of ISO 23278:2006) Data di scadenza: 2013-06-25 ISO/DIS 669* Resistance welding Resistance welding equipment Mechanical and electrical requirements (Revision of ISO 669:2000) Wood-based panels ISO/DIS 1954* Plywood Tolerances on dimensions (Revision of ISO 1954:1999) 6