GUJARAT TECHNOLOGICAL UNIVERSITY
|
|
|
- Trevor McKenzie
- 9 years ago
- Views:
Transcription
1 Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering Aerodynamics-II :30 To 01: Fundamentals of Jet Propulsion :30 To 01: Vibration and Noise Control :30 To 01: Computational Fluid Dynamics -II :30 To 01: Basic Control Theory :30 To 01: Avionics :30 To 01:00 Branch 02: Automobile Engineering Automobile Component Design :30 To 01: Automobile Heat Transfer :30 To 01: Transport Management and Laws :30 To 01: Automobile Chassis and Body Engineering :30 To 01: Vehicle Maintenance and Garage Practice :30 To 01: Quality Management :30 To 01:00 Branch 03: Bio-Medical Engineering Diagnostic Instrumentation :30 To 01: Analytical & Optical Instrumentation :30 To 01: Therapeutic Instrumentation :30 To 01: Bio-Medical Signal Processing :30 To 01: Bio-Medical Control Theory :30 To 01:00 Branch 04: Bio-Technology Advanced Molecular Biology-II :30 To 01: Fundamentals of Industrial Biotechnology :30 To 01: Environmental Biotechnology :30 To 01: Principles of Process Engineering-III :30 to 01: Instrumentation and Process Control :30 To 01: Bioethics, Patents and IPR :30 to 01:00
2 Branch 05 :Chemical Engineering Mass Transfer Operation II :30 to 01: Chemical Process Industries-II :30 to 01: Process Equipment Design-I :30 to 01: Computer Aided Process Synthesis :30 to 01: Pollution Control & Safety Management :30 to 01:00 Branch 06: Civil Engineering Advanced Construction Technology :30 to 01: Applied Fluid Mechanics :30 to 01: Railway, Bridge & Tunnel Engineering :30 to 01: Earthquake Engineering :30 to 01: Water & Waste Water Engineering :30 to 01: Geotechnical Engineering - II :30 to 01:00 Branch 07: Computer Engineering Software Engineering :30 to 01: Information Security :30 to 01: Computer Graphics :30 to 01: Web Application Development :30 to 01: Theory Of Computation :30 to 01: System Programming :30 to 01:00 Branch 08 : Electrical & Electronics Engineering Integrated Circuits & Application :30 to 01: Electronic Communication :30 to 01: Switch Gear & Protection :30 to 01: Advanced Microprocessors :30 to 01: Electrical Machine Design :30 to 01:00 Branch 09: Electrical Engineering Electrical Machine - III :30 to 01: Power Electronics - II :30 to 01: Microcontroller :30 to 01: Electrical & Electronic Measurement :30 to 01: High Voltage Engineering :30 to 01: Theory of Electromagnetics :30 to 01:00
3 Branch 10 : Electronics Engineering Audio - Video Systems :30 to 01: Antenna & Wave Propogation :30 to 01: VLSI Technology and Design :30 to 01:00 Branch 11 : Electronics & Communication Engineering Audio - Video Systems :30 to 01: Antenna & Wave Propogation :30 to 01: VLSI Technology and Design :30 to 01:00 Branch 12 : Electronics & Telecommunication Engineering Audio - Video Systems :30 to 01: Antenna & Wave Propogation :30 to 01: VLSI Technology and Design :30 to 01:00 Branch 13 : Environment Engineering Municipal Engineering :30 to 01: Fundamentals of Air Pollution :30 to 01: Estimation, Specification & Project Management :30 to 01: Occupational Health & Safety :30 to 01: Biological Process for Wastewater Treatment :30 to 01:00 Branch 14 : Food Processing & Technology Food Process Equipment Design :30 to 01: Food Rheology & Sensory Evaluation :30 to 01: Food Engineering Operations - II :30 to 01: Milk & Milk Products Technology :30 to 01: Food Drying & Dehydration :30 to 01:00
4 Branch 15 :Industrial Engineering Materials Management :30 to 01: Product Development & Value Engineering :30 to 01: Finance Management & Cost Control :30 to 01: Metal Cutting & Advanced manufacturing processes :30 to 01: Maintenance & Safety Engg :30 to 01:00 Branch 16 : Information Technology Software Engineering :30 to 01: Information Security :30 to 01: Computer Graphics :30 to 01: Modelling, Simulation and Operations Research :30 to 01: Web Technology and Programming :30 to 01:00 Branch 17 : Instrumentation & Control Engineering Instrumentation System :30 to 01: Process Control :30 to 01: Control System Components :30 to 01: Instrumentation Measurement - II :30 to 01: Analog and Digital Communication :30 to 01:00 Branch 19: Mechanical Engineering Dynamics of Machinery :30 to 01: Internal Combustion Engines :30 to 01: Computer Aided Design :30 to 01: Control Engineering :30 to 01: Industrial Engineering :30 to 01: Alternate Energy Sources :30 to 01: Heat and Mass Transfer :30 to 01:00 Branch 20 : Mechatronics Engineering Design of Mechanisms - I :30 to 01: Micro Processors & Micro Controllers :30 to 01: Control of Electric Drives :30 to 01: Electromechanical Measurements & Instruments :30 to 01: Hydraulic and Pneumatic Systems :30 to 01:00
5 Branch 21: Metallurgy Engineering Physical Metallurgy - I :30 to 01: Steel Making :30 to 01: Powder Metallurgy :30 to 01: Electrometallurgy & Corrosion :30 to 01: Advanced Materials and Applications :30 to 01:00 Branch 22 : Mining Engineering Economic Geology I :30 to 01: Underground Metal Mining :30 to 01: Sub-Surface Environment :30 to 01: Mine Surface Environment :30 to 01: Mine Hazards :30 to 01: Computer Application in Mining :30 to 01:00 Branch 23: Plastic Technology Plastic Extrusion Technologies :30 to 01: Plastic Structure, Property & Relationship :30 to 01: Plastic Process Instrumentation and Process Control :30 to 01: Additives & Compounding :30 to 01: Reaction Engineering & Rheology :30 to 01:00 Branch 24: Power Electronics Industrial Instrumentation :30 to 01: Microcontrollers for Power Electronics :30 to 01: Switch Gear & Fault Analysis :30 to 01: Power Processing Circuits - I :30 to 01: Industrial Drives & Control - I :30 to 01:00 Branch 25 :Production Engineering Statistical Methods and Quality Control :30 to 01: Welding Technology :30 to 01: Computer Aided Design :30 to 01: Allied Manufacturing Processes :30 to 01: Metal Forming Processes :30 to 01: Estimating, Costing & Engineering Economics :30 to 01:00
6 Branch 26 :Rubber Technology Rubber Compound & Product Testing :30 to 01: Synthetic Rubbers :30 to 01: Rubber Equipment Design - I :30 to 01: Thermoplastics Elastomers & Polymer Blends :30 to 01: Characterisation of Rubber :30 to 01:00 Branch 28 : Textile Processing Technology of Dyeing - II :30 to 01: Analytical Textile Chemistry - II :30 to 01: Chemistry and Applications of Textile Auxiliaries :30 to 01: Technology of Finishing - I :30 to 01: Technology of Printing - I :30 to 01:00 Branch 29: Textile Technology Statistical Quality Control & Textile Costing :30 to 01: Advance Fabric Structure & CAD :30 to 01: Physical Testing :30 to 01: Energy Conservation & Pollution Control In Textile Industry :30 to 01: Technical Textiles -I :30 to 01:00 Branch 31 : Computer Science & Engineering Software Engineering :30 to 01: Information Security :30 to 01: Computer Graphics :30 to 01: Web Application Development :30 to 01: Theory Of Computation :30 to 01: Operating System Design :30 to 01:00 Branch 32: Information & Communication Technology Antenna and Wave Propagation :30 to 01: Modelling Simulation and Operation Research :30 to 01: Web Technology & Programming :30 to 01:00
7 Branch 34: Manufacturing Engineering Finite Element Analysis in Manufacturing Engineering :30 To 01: Metal Forming Processes :30 To 01: Advance Manufacturing Processes :30 To 01: Mechatronics :30 To 01: Tool Design :30 To 01: Composite Technology (Institute Elective-III) :30 To 01:00 IMPORTANT INSTRUCTION FOR STUDENTS APPEARING IN ABOVE MENTION EXAMINATIONS: 1. All the students required to carry hall ticket with them issued by the university during exam time. 2. They must be in their respective examination hall 30 minutes before exam time failing which entry will not be permitted. 3. Any type of printed/handwritten/typed material, Mobile phone, Pager, or programmable calculator, PDA or any other objectionable material which breaches the code of conduct of university and falls under unfair means as per GTU circular dated 3 rd November, 2010 is not allowed to carry in examination hall 4. They must bring their own instruments such as scientific calculator etc. to be used in examination as its exchanges will not be permitted under any circumstances during exam time. I/C Controller of Examination Gujarat Technological University Copy to: 1. All principals of B.E. Colleges affiliated to GTU for display on notice board and departments of the colleges 2. All section of Gujarat Technological University 3. Commissionerate of Technical Education, Gujarat State for information
GOVERNMENT COLLEGE OF TECHNOLOGY NOV / DEC 2013 TIME TABLE BATCHES : 2003-2007 B.E. / B.TECH. DEGREE : FULL TIME & PART TIME 2003 REGULATION
GOVERNMENT COLLEGE OF TECHNOLOGY NOV / DEC 2013 TIME TABLE BATCHES : 2003-2007 B.E. / B.TECH. DEGREE : FULL TIME & PART TIME 2003 REGULATION SESSION Government College of Technology, Coimbatore - 641 013
CONTROLLER OF EXAMINATIONS
B.Arch. and B.Arch.(Interior Design) Marine /B.Tech(Co mmon to all branches) (Incorporating the First and Second Rescheduling and Changes and Additions - I,, I and IV) For candidates admitted in Anna University
Diploma in Electrical Engineering DEE
Diploma in Electrical Engineering DEE Electrical Engg. Electric Circuit Power Generation Basic Electronics Solid State Devices & Circuits Switching Theory & Logic Design I Electro Magnetic fields Analog
List of courses covered under each stream
List of courses covered under each stream Chemical Engineering & Allied S. No. COURSE 1 ADVANCED MATERIALS TECHNOLOGY 2 BIOCHEMICAL ENGINEERING 3 BIOCHEMICAL ENGINEERING AND BIOTECHNOLOGY 4 BIOMEDICAL
B.E. (OLD) (All Branches) Term-I & II Examinations,May/June, 2016
(OLD) (All Branches) Term-I & II NORTH MAHARASHTRA UNIVERSITY, JALGAON Circular No. 108 of 2016 Programme of [ All Branches ( Term-I & II ) Course:Jully 2008 Examinations, May/June, 2016 1) Candidates
REVISED AS ON 26/04/2016
SAVITRIBAI PHULE PUNE UNIVERSITY (Formerly University of Pune) Examination Circular No 127 Of 2016 REVISED AS ON 26/04/2016 BACHELOR OF ENGINEERING (2008 & 2012 COURSE) Examination of APR/MAY 2016 Instruction
Eligibility Qualifications for admission to M.E./M.Tech./M.Arch./M.Plan. degree programmes through single window counselling
Eligibility Qualifications for admission to M.E./M.Tech./M.Arch./M.Plan. degree programmes through single window counselling I. FACULTY OF CIVIL ENGINEERING B.E. / B.Tech 2. Chemical 3. Geoinformatics
Qualifying Degree and Seat Matrix for admission to M.Tech. (Part Time and Sponsored)
Qualifying Degree and Seat Matrix for admission to M.Tech. (Part Time and Sponsored) Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Applied Mechanics Aeronautical 00 05 Aerospace
Subject Name. Exam Date. Session CONTROLLER OF EXAMINATIONS
CY2111 GE2111 GE2112 HS2111 MA2111 PH2111 CY2161 GE2151 HS2161 MA2161 ME2151 PH2161 AE22 AE22 AE22 AE22 MA2211 ME22 AE2251 AE2252 AE2253 AE2254 AE2255 MA2264 AE23 AE23 AE23 AE23 EE2365 GE21 AE21 AE22 AE23
Program Academic program code
4101 Aerospace Engineering (4 Years, Bachelor of Technology) 4102 Agricultural and Food Engineering (4 Years, Bachelor of Technology) 4103 Biological Sciences and Bioengineering (4 Years, Bachelor of Technology)
College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings
College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings Master of Engineering Program Requirements: The student must complete a total of 30 credit hours
ADMISSION TO PG (MBA / MCA / M.E. / M.TECH. / M.ARCH. / M.PLAN) DEGREE COURSES 2014-2015
DEPARTMENT OF TECHNICAL EDUCATION : CHENNAI 600 025 ADMISSION TO PG (MBA / MCA / M.E. / M.TECH. / M.ARCH. / M.PLAN) DEGREE COURSES 2014-2015 ELIGIBLE QUALIFICATION(S) FOR PG DEGREE COURSES PRESCRIBED BY
Engineering Technology Division
93 xxx The Engineering Technology division of the Higher Colleges of Technology offers a wide range of programs at the Diploma, Higher Diploma and Bachelor of Applied Science levels. These programs prepare
Engineering Technology Division xxx
7 xxx The offers a wide range of programs. These programs prepare students to successfully move to challenging and critical positions requiring technical expertise in a modern and evolving world. Students
What can I do with a degree in... Engineering
What can I do with a degree in... Engineering The Department of Physics offers a spectrum of courses reflective of both the integral character of physics in the liberal arts curriculum and its essential
Seat Matrix for M.Tech [Part-Time & Sponsored] Programmes. Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Mechanics
![Seat Matrix for M.Tech [Part-Time & Sponsored] Programmes. Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Mechanics](/thumbs/31/15234787.jpg "Seat Matrix for M.Tech [Part-Time & Sponsored] Programmes. Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Mechanics")
Ekksrhyky usg: jk Vªh; izks ksfxdh lalfkku bykgkckn bykgkckn&211004 [Hkkjr] Motilal Nehru National Institute of Technology Allahabad Allahabad-211004 [India] Seat Matrix for M.Tech [Part-Time & Sponsored]
TABLES TO REFER FOR CHOICE FILLINGS DURING ONLINE APPLICATION SUBMISSION
TABLES TO REFER FOR CHOICE FILLINGS DURING ONLINE APPLICATION SUBMISSION TABLE-2 For Admission to First Year Programme (BHMS and BAMS, Pharmacy degree): (01 to 03) Exam. 10 +2 Sc BAMS and BHMS 01 PHARMACY
EXAMINATION TIMETABLE B.E. (SEM.-VII) (OLD) (ALL BRANCHES) EXAMINATIONS SECOND HALF 2015
EXAMINATION TIMETABLE B.E. (SEM.-VII) (OLD) (ALL BRANCHES) EXAMINATIONS SECOND HALF 2015 TIME: 11:00am to 02:00pm DAY THURSDAY MONDAY THURSDAY SATURDAY TUESDAY DATE 10 TH December,2015 14 ST December,
UNIVERSITY OF PUNE. ONLINE EXAM CELL Fax : 020-25601206 Ganeshkhind, Pune - 411 007
UNIVERSITY OF PUNE Phone : 020-25601229 ONLINE EXAM CELL Fax : 020-25601206 Ganeshkhind, Pune - 411 007 Email : [email protected] Maharashtra (INDIA) Web : http://www.unipune.ac.in Ref.:OEC/ 45
NATIONAL INSTITUTE OF TECHNOLOGY, TIRUCHIRAPPALLI-620015
NATIONAL INSTITUTE OF TENOLOGY, TIRUIRAPPALLI-620015 Tentative Vacancy Position for SPOT Admission 2015 for M.Tech Programme Sl.No. Department Specialization Group OC OBC SC ST OCPWD OBCPWD SCPWD STPWD
What can I do with this degree?
What can I do with this degree? ANY ENGINEERING DISCIPLINE Production Sales and Marketing Management Consulting Research and Development Teaching Law AEROSPACE Propulsion Fluid Mechanics Thermodynamics
PPIMT DATE SHEET GJU EXAMINATION DEC. 2014 M = Morning (10:00 A.M. to 01:00 P.M.) And E = Evening (02:00 P.M to 05:00.P.M.) Sr./I.D No.
PPIMT DATE SHEET GJU EXAMINATION DEC. 2014 M = Morning (10:00 A.M. to 01:00 P.M.) And E = Evening (02:00 P.M to 05:00.P.M.) Date of Exams. Class Paper code Nomenclature Sr./I.D No. Sessi on 08.12.2014
MASTER OF ENGINEERING Mechanical Engineering Program
MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.
ENGINEERING What can I do with this major?
ENGINEERING What can I do with this major? ANY ENGINEERING DISCIPLINE Research and Development Design Production Operations Management Teaching Consulting Sales and Marketing Law Manufacturing Healthcare
Autumn Semester Examination-December, 2015
Time Table Date: 10.12.2015 Course Branch Sem. Paper B. Tech EC I Remedial English Language EI I EE I CSE I IT I ME I B. Pharm I Remedial Biology/ Remedial Mathematics MBA BE I Research Methodology F&C
ELIGIBILITY FOR ADMISSION TO VARIOUS PROGRAMS (TENTATIVE)
ELIGIBILITY FOR ADMISSION TO VARIOUS PROGRAMS (TENTATIVE) B.E./ B. Tech./B. Arch. Programs Sl. No. Course Eligibility B.E./ B.Tech. B.Arch. Bachelor of / Bachelor of Bachelor of Architecture a) Second
NATIONAL INSTITUTE OF TECHNOLOGY WARANGAL 506 004, (T.S.) INDIA
NATIONAL INSTITUTE OF TECHNOLOGY WARANGAL 506 004, (T.S.) INDIA Advt. No Admn 01/2015 ADVERTISEMENT FOR RECRUITMENT OF FACULTY POSITIONS The National Institute of Technology, Warangal invites applications
Compendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN
Compendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN Reg d trademark of Canadian Council of Technicians and Technologists GENERAL PROGRAM CRITERIA FOR ALL DISCIPLINES Technician Level
Types of Engineering Jobs
What Do Engineers Do? Engineers apply the theories and principles of science and mathematics to the economical solution of practical technical problems. I.e. To solve problems Often their work is the link
MAHATMA GANDHI UNIVERSITY TIMETABLE FOR B.TECH DEGREE EXAMINATIONS, MAY,
MAHATMA GANDHI UNIVERSITY TIMETABLE FOR B.TECH DEGREE EXAMINATIONS, MAY, 2014 Semester I & II (New Scheme) (2013 Admission Regular, 2012 Admission Improvement & Supplementary /2010 Admission onwards Supplementary)
Eligibility Matrix for admission to MTech./MArch./MPlan./MDes./MURP/MBA Programmes under DASA-2015. NIT Agartala
Eligibility Matrix for admission to MTech./MArch./MPlan./MDes./MURP/MBA Programmes under DASA-2015 (All other criteria for admission are as per DASA-2015 norms). NIT Agartala Sl No. Department Postgraduate
Assistant Professor: Rs.12,000-420-18,300/- plus allowances as admissible to Central Government employees.
Indian Institute of Technology Kharagpur 721302 Faculty Openings The Institute invites applications from Indian nationals, possessing excellent academic background, commitment to quality teaching and potential
Double Degree exchange programs taught at Phelma for KTH students
Double Degree exchange programs taught at Phelma for KTH students Double Degree program for KTH students: In-coming Double Degree KTH students are registered in KTH and in Phelma, but they do not pay registration
Regulations: R 2013. Printing Tech. PTMA8251 Numerical Methods. PTME8251 Mechanics of Machines. PTCE 8252 Strength of Materials PTEC 8251 Electronics
Regulations: R 2013 ANNA UNIVERSITY:: CHENNAI 600 025. B.E./B.Tech. (Part Time) Degree Examinations, Nov Dec 2013 Regular Examinations Semester. No.: II Time Table Time: 9.30 A.M. to 12.30 P.M 11.11.2013
Poznan University of Technology Faculty of Electrical Engineering
Poznan University of Technology Faculty of Electrical Engineering Contact Person: Pawel Kolwicz Vice-Dean Faculty of Electrical Engineering [email protected] List of Modules Academic Year: 2015/16
STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and
STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and Astronautical Engineering Aeronautical Engineering Aeronautical
EXAMINATION SCHEDULE FOR MCA I SEMESTER BACK PAPER EXAMINATION JULY 2015
EXAMINATION SCHEDULE FOR MCA I SEMESTER 25.06.2015 THURSDAY 10 AM to 1 PM TCA 513 Procedure Oriented Programming using C 26.06.2015 FRIDAY 10 AM to 1 PM TCA 514 Combinatorics and Graph Theory 2- All Notice
Mk- Ckh vkj vecksmdj jk"vªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011
![Mk- Ckh vkj vecksmdj jkvªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011](/thumbs/37/17715872.jpg "Mk- Ckh vkj vecksmdj jkvªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011")
Mk- Ckh vkj vecksmdj jk"vªh; izks ksfxdh lalfkku] tkyu/kj &144011 Dr B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY, JALANDHAR - 144011 Admission to Ph D Programmes 2013-2014 (Starting from January-2014)
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2015-2016 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of November 1,
SECOND YEAR. Major Subject 3 Thesis (EE 300) 3 Thesis (EE 300) 3 TOTAL 3 TOTAL 6. MASTER OF ENGINEERING IN ELECTRICAL ENGINEERING (MEng EE) FIRST YEAR
MASTER OF SCIENCE IN ELECTRICAL ENGINEERING (MS EE) FIRST YEAR Elective 3 Elective 3 Elective 3 Seminar Course (EE 296) 1 TOTAL 12 TOTAL 10 SECOND YEAR Major Subject 3 Thesis (EE 300) 3 Thesis (EE 300)
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Evaluations During the 2011-2012 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October
Collection Policy: Engineering
Collection Policy: Engineering 1. Introduction The Lakehead University Library supports the instructional and research needs of students and faculty working within the Faculty of Engineering. From 1949
STUDENTS MUST APPLY AT WWW.JOINTEAMCATERPILLAR.COM TO BE CONSIDERED FOR AN ON-SITE INTERVIEW
Caterpillar MAJORS: Aerospace Engineering, Agricultural Engineering, Computer Science, Electrical Engineering, Engineering Mechanics/Engineering Physics, Industrial Engineering, Mechanical Engineering
Departments and Specializations
Departments and Specializations Department Post Specialization Areas Aerospace Engineering: Only candidates with a clear focus on one or more of the specified areas will be considered Experimental Structural
ELECTRONICS AND COMMUNICATIONS ENGINEERING GRADUTE PROGRAM FOR MASTER S DEGREE (With Thesis)
ELECTRONICS AND COMMUNICATIONS ENGINEERING GRADUTE PROGRAM FOR MASTER S DEGREE (With Thesis) PREPARATORY PROGRAM* CEE 201 Electrical Circuits 3+0 4 6 CEE 202 Introduction to Control Systems 2+2 3 5 CEE
Curriculum of Electronics Engineering Program
Curriculum of Electronics Engineering Program FIRST ACADEMIC SEMESTER EB 0101 Workshop on Methods of University Studies 2 -- -- -- 4 EB 0102 Workshop on Oral and Written Communications 2 -- -- -- 4 EB
Code Title Code Title 15.10000 Engineering and Technology Pathway
15.10000 Engineering and Technology Pathway 15.10010 Safety Engineering 17-2111.00 Health and Safety Engineers, Except Mining Safety Engineers and Inspectors 15.10010 Safety Engineering 17-2111.01 Industrial
Invitation for Expression of Interest (EoI) for translation and subtitling of existing videos EOI No: CDIT/GNL/ T355 Dated 11/07/2014
Invitation for Expression of Interest (EoI) for translation and subtitling of existing videos EOI No: CDIT/GNL/ T355 Dated 11/07/2014 Centre for Development of Imaging Technology (C--DIT) (Under Govt.
THE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION
THE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION GROUP 867 ARCHITECTURAL, ENGINEERING AND OTHER TECHNICAL SERVICES Excerpt from CPCprov-en-Publication.doc - United Nation Statistic Division Group Class Subclass
Class of 2016 Second Year Common CORE - 2013-2014
2013-2014 Engineering and Applied Science Calendar Class of 2016 Second Year Common CORE - 2013-2014 APSC 200 Engineering Design and Practice II F 3-0-1 4 APSC 293 Engineering Communications F.25-0-.75
NATIONAL SUN YAT-SEN UNIVERSITY
NATIONAL SUN YAT-SEN UNIVERSITY Department of Electrical Engineering (Master s Degree, Doctoral Program Course, International Master's Program in Electric Power Engineering) Course Structure Course Structures
Subscription Order Form
STM JOURNALS STM JOURNALS STM (Scientific, Technical and Medical) Journals www.stmjournals.com Subscription Order Form International Rates (Year - 2014) The Publisher, STM Journals (Subscriptions), Consortium
AREAS OF STUDY GRADUATE DEGREE, UNDERGRADUATE, CERTIFICATE, AND NON-DEGREE PROGRAMS ENGINEERING. Architectural Engineering. Biological Engineering
AREAS OF STUDY GRADUATE DEGREE, UNDERGRADUATE, CERTIFICATE, AND NON-DEGREE PROGRAMS ENGINEERING Architectural Engineering Architectural Engineering Biological Engineering Biological Engineering Biomedical
UNIVERSITY OF CALICUT (Pareeksha Bhavan) REVISED TIME TABLE FOR THE I SEMESTER M.TECH. ENGINEERING SUPPLEMENTARY EXAMINATION JANUARY 2016
UNIVERSITY OF CALICUT (Pareeksha Bhavan) REVISED TIME TABLE FOR THE I SEMESTER M.TECH. ENGINEERING SUPPLEMENTARY EXAMINATION JANUARY 2016 Time of Examination Maximum Marks : 1.30 pm to 4.30 pm (Except
The large groups, contractors and new lead projects come mainly in these sectors:
The SMEs / ETI / Startups and R&D actors with the following skills: Test benches Real industrial equipment Consultancy, R&D CAD / CAM mechanical, electronic Technical Ceramics Chemistry Electronic Components
Master's Programs. Applied Chemisty. Subject
Master's Programs Applied Chemisty Optional Advanced Seminar in Materials Science and Engineering I Advanced Seminar in Materials Science and Engineering II Special Project in Materials Science and Engineering
How To Understand Engineering
ENGINEERING YOUR FUTURE Dr. Vlasov 1 Outline 1. Importance of Engineering 2. Major Engineering Disciplines 3. Engineering Functions 4. Engineering Majors 5. Statistical Overview Dr. Vlasov 2 Importance
GRADUATE DIPLOMA IN ENGINEERING - 9210 POST GRADUATE DIPLOMA IN ENGINEERING - 9210
GRADUATE DIPLOMA IN ENGINEERING - 9210 POST GRADUATE DIPLOMA IN ENGINEERING - 9210 INTRODUCTION TO THE QUALIFICATIONS Graduate Diplomas and Post Graduate Diplomas have been developed for those undergoing
Date : 04.06.2015. 8/6/2015 Monday. Controller of Examinations. Date/ Day. S. No.
Schedule for COP Examinations of Theory Subjects, 2014-15 Subject Code Subject Name Subject Code Subject Name 1 CEE 323 GEOTECHNICAL ENGINEERING ECE 403 OPTICAL COMMUNICATION & NETWORKS 2 EEE 305 CONTROL
THAPAR UNIVERSITY. (Declared under section 3 of UGC Act, 1956 vide notification # F.9-12/84-U.3 of GOI) PATIALA-147004, PUNJAB http:// www.thapar.
THAPAR UNIVERSITY (Declared under section 3 of UGC Act, 1956 vide notification # F.9-12/84-U.3 of GOI) PATIALA-147004, PUNJAB http:// www.thapar.edu FACULTY OPENINGS: Information & Instruction Sheet ---------------------------------------------------------------------------------------------------------------------------
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2013-2014 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October 27,
Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified)
Moi University Academic Calendar 2012/2015 (ISO 9001:2008 Certified) 272 School of Engiineering Contact: The Dean, School of Engineering Moi University P.O. Box 3900 30100, Eldoret, Kenya Tel: (053) 43170;
Object Oriented Programming Data Comm. & Networks Grid Computing Programming in VB. NET Programming in Java
PRESTON UNIVERSITY Subject List Graduate and Undergraduate Programs Master of Computer Science (MCS) Specializations Data Structures Introduction to IT Programming Languages Operating Systems Database
Core Subjects (CS) Compulsory Subjects (CPS) Optional Subjects (OS)
UNDERGRADUATE DEGREE PROGRAMME IN MECHANICAL ENGINEERING School of Industrial Engineering, Albacete. Higher Technical School of Industrial Engineering, Ciudad Real and Polytechnic University School, Almadén
2016-17 INFORMATION BROCHURE. M.Tech. (Part Time and Sponsored) Motilal Nehru National Institute of Technology Allahabad Allahabad (India)
2016-17 INFORMATION BROCHURE M.Tech. (Part Time and Sponsored) Hewlett-Packard Company 2015-16 M.Tech. (Part Time and Sponsored) Motilal Nehru National Institute of Technology Allahabad Allahabad (India)
Part 0 - Classification and Surveys Classification and Surveys I-0 2016-01
Code Edition I - Ship Technology Part 0 - Classification and Surveys Classification and Surveys I-0 2016-01 Part 1 - Seagoing Ships Chapter 1 - Hull Structures I-1-1 2016-01 Chapter 1 - Hull Structures
GRU Purchasing Material Group Codes
Title Code Trees and shrubs 10161500 Floral plants 10161600 Non flowering plants 10161800 Fertilizers and plant nutrients and herbicides 10170000 Pest control products 10190000 Minerals and ores and metals
NOTIFICATION EDUCATION DEPARTMENT S achivalaya, Gandhinagar. Dated 16th June, 2015.
NOTIFICATION EDUCATION DEPARTMENT S achivalaya, Gandhinagar. Dated 16th June, 2015. Gujarat Professional Technical Educational Colleges or Institutions (Regulation of Admission and Fixation of Fees) Act,
1) Chemical Engg. PEOs & POs Programme Educational Objectives
1) Chemical Engg. PEOs & POs Programme Educational Objectives The Programme has the following educational objectives: To prepare students for successful practice in diverse fields of chemical engineering
MAHATMA GANDHI UNIVERSITY. Kottayam, Kerala
MAHATMA GANDHI UNIVERSITY Kottayam, Kerala B.Tech. Degree Courses 2010-2011 Revised Scheme and Syllabus And Syllabus for Combined I & II Sem Contents 1. Course Regulations of B.Tech. Degree Courses (With
Mechanical Engineering
Mechanical Engineering What it means to be a Mechanical Engineer! Gajendra Circle Initiative (GCI) from IIT Madras Alumni Association and The Hindu Group May 15, 2010 Compiled by: Adayana Learning Solutions
Biomedical engineering
SAMARA STATE AEROSPACE UNIVERSITY Biomedical engineering Educational program 01.01.2014 Biomedical systems and biotechnology (Biomedical engineering) Undergraduate (Bachelor program) Undergraduate 4 years
Welcome to The College of Engineering at Virginia Tech. Information Session
Welcome to The College of Engineering at Virginia Tech Information Session Virginia Tech Engineering Student Traits Creativity Plan to study Interest in Math and Science Teamwork Are You Ready? Challenging
CHEMISTRY What can I do with this major?
CHEMISTRY What can I do with this major? ANY CHEMISTRY DISCIPLINE Product Development Process Development Analysis Testing Biotechnology (using living organisms or cell processes to make useful products)
BEng (Electrical Engineering)
BEng (Electrical Engineering) Course descriptions are available in the Lakehead University Calendar. First Year: Fall Term /Tut Engineering 26 - Engineering 26 - Electric Circuit Theory I Electric Circuit
Foundation Year for Engineering, Physics and Geophysics. Faculty of Engineering, Science and Mathematics
Foundation Year for Engineering, Physics and Geophysics Faculty of Engineering, Science and Mathematics Development of electronic technology Who is the course for? The Foundation Year is the first year
Aeronautics. Airframe Maintenance Technician
Airframe Maintenance Technician Program Description Practical and theoretical knowledge in basic maintenance techniques, plus the special requirements of either airframe or powerplant work. Upon satisfactory
Existing Programmes Relevant to Testing and Certification Industry in Local Universities as at March 2010
A. Science (i) General Science Doctor of Philosophy Master of Philosophy Bachelor of Science (ii) Physics, Chemistry, Biology PhD in Biology MPhil in Biology Mphil/PhD in Biochemistry MPhil/PhD in Chemistry
UNIVERSITY OF MARIBOR FACULTY OF CHEMISTRY AND CHEMICAL ENGINEERING INFORMATION PACKAGE / INTERNATIONAL EXCHANGE STUDENTS' GUIDE 2016/2017.
UNIVERSITY OF MARIBOR FACULTY OF CHEMISTRY AND CHEMICAL ENGINEERING INFORMATION PACKAGE / INTERNATIONAL EXCHANGE STUDENTS' GUIDE 2016/2017 Part II Information on study programmes A) General description
ELECTRICAL ENGINEERING DEGREE. List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO
ELECTRICAL ENGINEERING DEGREE List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO 1 Degree: Site: (V12G320V01) Bachelor's Degree in Electrical
How To Write A Science Degree
The following is a list of Classification of Instructional Programs codes published by the National Center for Education Statistics (NCES codes) that have been designated by ICE as science, technology,
School of Engineering
College of Science, Engineering and Technology School of Engineering Learn without limits. college of science, engineering and technology Civil engineering is the art and science of planning, design and
ENGINEERING AUSTRALIAN COLLEGE OF KUWAIT - CORPORATE TRAINING
INTRO TO CORPORATE TRAINING Drawing upon ACK expertise and in collaboration with international bodies the Australian College of Kuwait Corporate Training (ACK CT) division was formed in 2009 to cater for
GUJARAT TECHNOLOGICAL UNIVERSITY Environmental Science & Technology(35) BE 1st To 8th Semester Exam Scheme & Subject Code
GUJARAT TECHNOLOGICAL UNIVERSITY Environmental Science & Technology(35) BE 1st To 8th Semester Scheme & Subject EVALUATION SCHEME () Process(M) MAX MIN MAX MIN MAX MIN MAX MIN 20 8 10 4 70 23 X 50% of
PURDUE UNIVERSITY CALUMET
welcome, students Thank you for your interest in the College of Engineering, Mathematics, and Science at Purdue University Calumet. We welcome the opportunity to be your partner on the road to your future,
M.S. in Civil Engineering
M.S. in Civil Engineering M.S. in Civil Engineering Degree Requirements Students who do not have a bachelor's degree in civil engineering, but who want to obtain a master's degree in civil engineering
ENGINEERING AT CAMBRIDGE
ENGINEERING AT CAMBRIDGE GEOFF PARKS DIRECTOR OF UNDERGRADUATE ADMISSIONS ENGINEERING Engineers are ingenious people who apply science and technology to the fulfilment of human needs and aspirations Engineers
Two year M.Tech Programme in Railway Engineering at IIT Kharagpur
Two year M.Tech Programme in Railway Engineering at IIT Kharagpur Commencing from the 2015-2016 academic year, IIT Kharagpur, with grant-in-aid from Indian Railways, is starting a two year M.Tech program
STEM List: Numerical Order
U.S. Immigration and Customs Enforcement Programs STEM Designated Degree Programs Effective date: April 8, 2008; Updated September 25, 2008 The following is a list of Classification of Instructional Programs
Faculty of Applied Science and Engineering University of Toronto. Chapter 7. Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter 1.
Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter MECHANICAL ENGINEERING (Offered by the Department of Mechanical and Industrial Engineering. For a listing of Academic Staff in the Department, please refer
SERIALS PUBLICATIONS (P) LTD.
J o u r n a l s SERIALS PUBLICATIONS (P) LTD. PUBLISHERS : JOURNALS & BOOKS 4830/24, Ansari Road, Darya Ganj, New Delhi-110 002 Ph.: 011-2324 5225, 2325 9212, E-mail: [email protected] National Journals
COUNCIL OF ENGINEERS THAILAND
COUNCIL OF ENGINEERS THAILAND APEC Engineer ASSESSMENT STATEMENT June 2007 June 2007 ASSESSMENT STATEMENT 1 APEC Engineer ASSESSMENT STATEMENT CONTENT INTRODUCTION 1 PART A MONITORING COMMITTEE 2 PART
Politecnico di Milano since 1863. WC2 University Network September 1-3, 2010
Politecnico di Milano since 1863 WC2 University Network September 1-3, 2010 The Campuses of the Politecnico di Milano Milano Leonardo Campus Leonardo Campus is the historical seat of the Politecnico It
Maths where is it used in Engineering?
Maths where is it used in Engineering? How and. are used to measure athletes performance and model the Irish Sea (www.strava.com; www.prism.ie) Topic Engineering Applications Specific Example Complex Numbers
Aerospace Engineer. information obtained from Occupational Outlook Handbook (www.bls.gov)
Aerospace Engineer Design, develop and test aircraft, spacecraft and missiles and supervise the manufacture of these products Develop new technologies for use in aviation, defense systems and space exploration
Engineering & Technology High School. Course Description
& Technology High School The Following Courses will be offered for the High School program under & Technology for the year 2013 & 14 year. These courses are the First Phase for the development of new Pathways,