Nokia with your Nokia cellular phone Charge and turn on both cellular phone and udirect 2. Turning on Nokia Bluetooth Find the connectivity settings of your phone. With most Nokia models the following navigation applies: Menu > Settings > Connectivity > Bluetooth LED indicator is blue and flashing quickly. udirect 2 is now in To pair udirect 2 with your cellular phone 1. While in the Bluetooth menu, select one of the following options. Depending on the model, pairing selection may be: Search for audio enhancement, or Press right to switch to the Paired devices tab. Select Options > New paired device The phone will start searching for Bluetooth enabled devices within range. 2. Under the list of available devices, select udirect 2 and passkey. Allow devices to complete the pairing process. On the cellular phone, udirect 2 is shown as a paired device and on udirect 2, the Bluetooth LED indicator flashes slowly, indicating that the devices are successfully paired. 1. In addition to being paired, which is done only once, your udirect 2 and cellular phone need to be connected. While in the Paired devices menu, select udirect 2 on your cellular phone. 2. Select Connect or Connect to audio device. On some phones you can configure automatic connection within the access settings of the device details. 3. If prompted to allow automatic reconnection, do so. This way udirect 2 and your cellular phone will reconnect whenever within range. If you have difficulties navigating to the Bluetooth settings, consult your cellular phone user guide or ask your cellular phone dealer. Nokia is a registered trademark of Nokia Corporation. A/11-046 028-5414-02
iphone with your iphone Charge and turn on both your iphone and udirect 2. Turning on iphone Bluetooth 1. From the Home screen, select the Settings app. 2. Select General. 3. Select Bluetooth and turn Bluetooth ON. iphone will start searching for nearby Bluetooth-enabled devices. LED indicator is blue and flashing quickly. udirect 2 is now in Searching for udirect 2 and confirming pairing with passcode 0000 (four zeros) Under the list of available devices, select udirect 2 and passkey. Allow the devices to complete the pairing process. On the iphone, udirect 2 is shown as a paired device and on udirect 2, the Bluetooth LED indicator flashes slowly, indicating that the devices are successfully paired. Connecting udirect 2 with your iphone udirect 2 and iphone need to be connected. This is done either automatically or via the iphone s menu. If prompted to allow automatic reconnection, do so. This way udirect 2 and your iphone will reconnect whenever within range. iphone compatibility issues Unfortunately, iphone models with Bluetooth functionality are compatible only with certain types of devices. If a problem occurs with the connection between your iphone and udirect 2, or if you are uncertain of your iphone s Bluetooth capabilities, consult your iphone user guide or ask your Apple dealer. iphone is a registered trademark of Apple Inc. Apple is a registered trademark of Apple Inc. A/11-046 028-5418-02
Samsung with your Samsung cellular phone Charge and turn on both your cellular phone and udirect 2. Turning on Samsung Bluetooth 1. Find the connectivity settings of your phone. With most Samsung models one of the following navigation options applies: Menu > Settings > Connectivity tab > Bluetooth > My devices, or Menu > Applications > Bluetooth > My devices or Applications > Settings > Wireless + Network > Bluetooth LED indicator is blue and flashing quickly. udirect 2 is now in Pairing udirect 2 with your cellular phone 1. While in the Bluetooth menu, select Search new device 2. Under the list of available devices, select udirect 2 and passkey. Allow devices to complete the pairing process. On the cellular phone, udirect 2 is shown as a paired device and on udirect 2, the Bluetooth LED indicator flashes slowly, indicating that the devices are successfully paired. udirect 2 and cellular phone need to be connected. 1. To connect manually, in the My devices or device menu, select udirect 2 and 2. Select Options > Connect On some phones you can configure automatic connection in the access settings of the device details. This allows udirect 2 to connect automatically without confirmation. 3. If prompted to allow automatic reconnection, do so. This way udirect 2 and your cellular phone will reconnect whenever within range. If you have difficulties navigating to the Bluetooth settings, consult your cellular phone user guide or ask your cellular phone dealer. Samsung is a registered trademark of Sumsung Electronics Corp. Ltd. A/11-046 028-5415-02
Cellular phone with your cellular phone Charge and turn ON both your cellular phone and udirect 2. Turning on cellular phone Bluetooth 1. Find the connectivity settings of the phone. 2. Look for Bluetooth under the Menu or one of its submenus, and turn the Bluetooth feature ON. into pairing mode by pressing and holding the ( ) and ( ) buttons for about two seconds until the Bluetooth LED indicator is blue and flashing quickly. udirect 2 is now in Searching for udirect 2 and confirming pairing with passcode 0000 (four zeros) 1. On your cellular phone, choose to add a new Bluetooth device. The phone starts searching for Bluetooth enabled devices within range. 2. Under the list of available devices, select udirect 2 and passkey. Allow devices to complete the pairing process. On the cellular phone, udirect 2 is shown as a paired device and on udirect 2, the Bluetooth LED indicator flashes slowly, indicating that the devices are successfully paired. udirect 2 and cellular phone need to be connected. This is done either automatically or via the cellular phone s menu. 1. Under the Bluetooth menu, select Paired devices or My devices. 2. Highlight udirect 2 and select Connect. 3. Some cellular phones may ask which Bluetooth service you wish to enable. Select Headset and if available Stereo Headphones. On some cellular phones, the headset icon indicates that udirect 2 is connected. 4. If prompted to allow automatic reconnection, do so. This way udirect 2 and your cellular phone will reconnect whenever within range. Cellular phone compatibility issues Bluetooth functionality is implemented in different ways depending on the cellular phone manufacturer. Unfortunately, some cellular phone models with Bluetooth functionality are compatible only with certain types of devices. If a problem occurs with the connection between your cellular phone and udirect 2, or if you are uncertain of your cellular phone s Bluetooth capabilities, consult your cellular phone user guide or ask your cellular phone dealer. A/11-046 028-5416-02
LG with your LG cellular phone Charge and turn ON both your cellular phone and udirect 2. Turning on LG Bluetooth 1. Find the connectivity settings of your phone. With most LG models one of the following navigation options applies: Menu > Settings & Tools > Bluetooth, or Menu > Settings > Connectivity > Bluetooth > Paired devices, or Menu > Tools > Bluetooth or Menu > Settings > Wireless + Networks > Bluetooth into pairing mode by pressing and holding the ( ) and ( ) buttons for about two seconds until the Bluetooth LED indicator is blue and flashing quickly. udirect 2 is now in Pairing udirect 2 with your cellular phone 1. While in the Bluetooth menu, select one of the following options. Depending on the model, pairing selection may be: Add new device, Search, or Add New > Search The phone will start searching for Bluetooth-enabled devices within range. 2. Under the list of available devices, select udirect 2 and passkey. Allow devices to complete the pairing process. On the cellular phone, udirect 2 is shown as a paired device and on udirect 2, the Bluetooth LED indicator flashes slowly, indicating that the devices are successfully paired. udirect 2 and cellular phone need to be connected. Typically, udirect 2 will be automatically connected after pairing. 1. To connect manually, in the Paired Devices menu, select udirect 2 and 2. Select Options > Connect On some phones you can set udirect 2 as authorized. This allows udirect 2 to connect automatically without confirmation. 3. If prompted to allow automatic reconnection, do so. This way udirect 2 and your cellular phone will reconnect whenever within range. If you have difficulties navigating to the Bluetooth settings, consult your cellular phone user guide or ask your cellular phone dealer. LG is a registered trademark of LG corporation. A/11-046 028-5411-02
Motorola with your Motorola cellular phone Charge and turn ON both your cellular phone and udirect 2. Turning on Motorola Bluetooth 1. Find the connectivity settings of your phone. With most Motorola models, one of the following navigation options applies: Menu > Connection > Bluetooth link, or Menu > Bluetooth link > Paired Devices > Option, or Settings > Connection > Bluetooth Link > Hands-free, or Control Panel > Connections tab > Bluetooth > Devices tab or Menu > Settings > Wireless + Networks > Bluetooth settings LED indicator is blue and flashing quickly. udirect 2 is now in Pairing udirect 2 with your cellular phone 1. While in the Bluetooth menu, select one of the following options. Depending on the model, pairing selection may be: Add Audio Device, New Paired Device, Look for Devices, Add or Scan. The phone will start searching for Bluetooth-enabled devices within range. 2. Under the list of available devices, select udirect 2. Some phone models will Bond with udirect 2. If you are prompted to Bond with udirect 2, confirm with YES. When asked for the passcode or passkey, enter 0000 (four zeros). udirect 2 will be added to the Bluetooth devices list. Allow devices to complete the pairing process. On the cellular phone, udirect 2 is shown as a paired device and on udirect 2, the Bluetooth LED indicator flashes slowly, indicating that the devices are successfully paired. For Android phones, under Bluetooth settings, scan for devices and tap udirect 2 to connect. udirect 2 and cellular phone need to be connected. On some phones you can configure automatic connection in the access settings of the device details. This allows udirect 2 to connect automatically without confirmation. If prompted to allow automatic reconnection, do so. This way udirect 2 and your cellular phone will reconnect whenever within range. If you have difficulties navigating to the Bluetooth settings, consult your cellular phone user guide or ask your cellular phone dealer. Motorola is a registered trademark of Motorola Inc. A/11-046 028-5413-02
Sony Ericsson with your Sony Ericsson cellular phone Charge and turn ON both your cellular phone and udirect 2. Turning on Sony Ericsson Bluetooth 1. Find the connectivity settings of your phone. With most Sony Ericsson models one of the following navigation options applies: Menu > Settings > Connectivity tab > Bluetooth > My devices, or Menu > Connectivity > Bluetooth > My devices, or (Tools or Main Menu) > Control panel > Connections > Bluetooth Devices tab or Applications > Wireless controls > Bluetooth settings LED indicator is blue and flashing quickly. udirect 2 is now in Pairing udirect 2 with your cellular phone 1. While in the Bluetooth menu, select New device or Add or Scan for new devices. udirect 2 and cellular phone need to be connected. 1. While in My devices or Bluetooth devices menu, select udirect 2. 2. Select Connect. On some phones you can configure automatic connection in the access settings of the device details. This allows udirect 2 to connect automatically without confirmation. 3. If prompted to allow automatic reconnection, do so. This way udirect 2 and your cellular phone will reconnect whenever within range. If you have difficulties navigating to the Bluetooth settings, consult your cellular phone user guide or ask your cellular phone dealer. 2. Under the list of available devices, select udirect 2 and passkey. Allow devices to complete the pairing process. On the cellular phone, udirect 2 is shown as a paired device and on udirect 2, the Bluetooth LED indicator flashes slowly, indicating that the devices are successfully paired. Sony Ericsson is a registered trademark of Sony Corporation. A/11-046 028-5412-02
Personal computer (PC) with a personal computer (PC) You can use udirect 2 to listen to audio on your PC if your PC supports Bluetooth. You must first perform the Bluetooth pairing procedure between udirect and your PC as described below. To pair udirect 2 and a personal computer (PC): 1. Charge and turn ON your PC and udirect 2. 2. Ensure the Bluetooth connectivity is turned ON. Either activate the built-in Bluetooth functionality or connect the external Bluetooth adapter on your PC. 3. On the PC, go to My Bluetooth Places and select Add Bluetooth Device. Or, Start > Control Panel, and select Bluetooth Device Wizard. 4. LED indicator is blue and flashing quickly. udirect 2 is now in pairing mode for two minutes or until the pairing is 5. On the PC, navigate to find and add a specific Bluetooth device. 6. Under the list of found Bluetooth devices, choose udirect 2. 7. When the PC prompts for a passcode or PIN, enter 0000 (four zeros). 8. Allow the devices to establish a trusted link. 9. If prompted on the PC to choose Bluetooth services, you may have several options available. Select Stereo Headset to stream audio in stereo. 10. After choosing which services to enable, finish the connection and exit the setup on the PC. The Bluetooth LED indicator flashes blue slowly indicating that the devices are successfully paired. PC compatibility issues Bluetooth functionality is implemented in different ways depending on the PC manufacturer. Some PCs with Bluetooth functionality are compatible only with certain types of devices. If a problem occurs with the connection between your PC and udirect 2, or if you are uncertain of your PC s Bluetooth capabilities, consult your PC user guide or ask your PC dealer. A/11-046 028-5417-02
BlackBerry (6 OS) with your BlackBerry Charge and turn on both your BlackBerry and udirect 2. Turning on BlackBerry Bluetooth (6 OS) 1. On the home screen, click the connections area at the top of the screen, or click the Manage Connections icon. 2. To turn on Bluetooth technology, select the Bluetooth checkbox. LED indicator is blue and flashing quickly. udirect 2 is now in Searching for udirect 2 and confirming pairing with passcode 0000 (four zeros) 1. On the Home screen, click the connections area at the top of the screen, or click the Manage Connections icon. 2. Click Networks and Connections > Bluetooth Connections > Add New Device > Search. 3. Select the Unitron udirect 2. 4. Enter the Passkey: 0000 (four zeros) when asked for the passcode or passkey. Allow the devices to complete the pairing process.on the BlackBerry, udirect 2 is shown as a paired device. Under Paired devices, select udirect 2. 5. On udirect 2, the Bluetooth LED indicator flashes slowly, indicating that the devices are successfully paired. Connecting udirect 2 with your BlackBerry udirect 2 and BlackBerry need to be connected. 1. On the Home screen, click the connections area at the top of the screen, or click the Manage Connections icon. 2. Click Networks and Connections > Bluetooth Connections. 3. Highlight Unitron udirect 2 and press the Connect key. BlackBerry compatibility issues Unfortunately, some BlackBerry models with Bluetooth functionality are compatible only with certain types of devices. If a problem occurs with the connection between your BlackBerry and udirect 2, or if you are uncertain of your BlackBerry s Bluetooth capabilities, consult your BlackBerry user guide or ask your BlackBerry dealer. BlackBerry is a registered trademark of Research In Motion.
BlackBerry (device software v 5.0) with your BlackBerry Charge and turn on both your BlackBerry and udirect 2. Turning on BlackBerry Bluetooth 1. Press the Menu key. 2. Scroll to Options (on some phones Settings), and push the selection wheel (key) in to select it. 3. Select Bluetooth and Enable Bluetooth. LED indicator is blue and flashing quickly. udirect 2 is now in Searching for udirect 2 and confirming pairing with passcode 0000 (four zeros) 1. On your BlackBerry, select Add new device, and search. The BlackBerry starts searching for Bluetooth enabled devices. 2. Under the list of available devices, select udirect 2. 3. Enter the Passkey: 0000 (four zeros) when asked for the passcode or passkey. Allow the devices to complete the pairing process.on the BlackBerry, udirect 2 is shown as a paired device. Under Paired devices, select udirect 2. 4. On udirect 2, the Bluetooth LED indicator flashes slowly, indicating that the devices are successfully paired. Connecting udirect 2 with your BlackBerry udirect 2 and BlackBerry need to be connected. 1. Under the Bluetooth menu on the BlackBerry, select Connect. 2. To allow udirect 2 to connect to the BlackBerry again in the future without confirmation, press the selection wheel in, select Device Properties and press the selection wheel again. 3. Select Ask or Trusted and then Yes. udirect 2 is now set as a trusted device. 4. Press the Back button (the button to the right of the selection wheel), and select Save. BlackBerry compatibility issues Unfortunately, some BlackBerry models with Bluetooth functionality are compatible only with certain types of devices. If a problem occurs with the connection between your BlackBerry and udirect 2, or if you are uncertain of your BlackBerry s Bluetooth capabilities, consult your BlackBerry user guide or ask your BlackBerry dealer. BlackBerry is a registered trademark of Research In Motion. A/11-046 028-5419-02