User Manual Thanks for using Tiba fan coil units' selection software. To start the selection process to software selection there are some steps we need to follow: Front page: 1. Only selection 2. Performance tabled 3. Offers management 4. Offer path 5. Language 6. Unit measure system (Select request measurement customer technical(si) or custom Imperial ) 7. Currency management 1
1. Only selection The only selection button use in case of you need only one selection not many selections for a complete project.( more than one selection will be explained later in Offers management). 2
1. Performance tabled To generate a complete table for units' performance at different air flow rates. a- Input data Select model Select fan speed Select Standard air flow or fan with external static pressure. Determine no. Of Rows Add request on coil dry & wet bulb temperature Add water in/out temp And click on the "generate: button we get this 3
We select the cooling folder and select the file which contains selected model and click on "open" Please wait few minutes, after finished generate 4
We go to link C:\Program Files\Fancoils6Tiba\Cliente\Excel Catalogue\Cooling We get the results of performances table. 5
1. Offers management The Page Includes New offer (to add new project) Open offer Save offer Delete offer Customers (add the customers details) Exit Offer Regen. (to work regeneration) Export PDF (to get software output is PDF format) Change logo Add (to get new unit) Delete ( deleted unit) Modify (to modify the unit) Currency management 6
To start the unit selection: 1- Just click on the "Add button, we get to selection window a- Input data o Request capacity (kw) o Then selected desired & accepted range % 10-50 %. o Type of fluid User can select water, ethylene or propylene glycol as per desired concentration. o Air flow (standard air flow OR fan with E.S.P (pa)) o Type of filter (aluminium or synthetic) o Sound (sound pressure and sound power...) o Models (example CRA.CRM, CRL...) o No. of rows (3 or 4 rows) o Fan speed (High, Medium or Low) o Plant(2pipe or 4 pipe) o Fin type (corrugated, smooth, and louvered) o Cooling data (inlet air condition DB/R.H AND) o User can make selection or calculation depending water in/out temp. Or water in / flow 7
rate. o o Heating data (inlet air condition DB/R.H AND fluid condition in/out) maximum range of temperature 29 c Auxiliary coil (in case 4 pipe system) b- Output data o Selected air flow o Static Pressure (Pa) o Total capacity (kw) o Sensible capacity (kw) o Water Entering /Leaving temp &water flow &water pressure drop o Air out DB C /R.H % o Heating Water Entering /Leaving temp &water flow &water pressure drop o NOISE o PRICE ($) **For Example Required AIR FLOW 600 CFM & E.S.P 30 PA, IAT 24/50%, WATER TEMP 7/12 C, Heating condition INLET AIR TEMP 20 C INLET WATER TEMP 70 C AND RANG OF TEMP 25 C 8
Selection 1- Select model CRA 2- Entering air flow m3/h 1020 3- Entering E.S.P (pa) 30 4- Tolerance 50% 5- Determined no. Of rows FAN COIL UNIT 6- Entering inlet air temperature DB C & relative humidity (not wet bulb) 7- Entering Inlet Fluid Temperature & range of temperature 8- Heating Entering inlet air temperature DB C& Fluid Temperature & range of temperature And click on the "compute" button and select the 3 speeds of the same unit that one speed of them has already verified the required air flow and cooling capacity 9
Then click on the "configure accessories" button You will get Parameters No. of rows &no. of circuits& fin pitch, all can be changed manually to achieve the required capacity. Accessories Selection by project requirements Multiplier Multiplier unit/ multiplier accessories to generate the unit price 10
Then click the "PRINT" button You will get 11
Then click on the "Print out Extra Data" button to insert unit identification And click on the "ok" button In the page click on the button "save" 12
And click on the "ok" button And click on the "Exit" button PRINT OUTPUT Click on the "EXPORT PDF" button 13
1. Offer path The path of save offer on computer. 2. Language (Choose the language you want) 14
3. Currency management (the basic currency is $) 4. Unit measure system (Select request measurement customer technical(si) or custom Imperial ) Thank you 15