400 SS-2 SS-3 SS-4 SS-6 SS-9 SS-10 SS-12 2 SS-13 SS-14 SS-15 SS-18 SS-17 10 SS-19 SS-20 SS-21 SS-22 SS-23 SS-24 SS-25 SS-26 SS-27 SS-28 SS-29 SS-30 SS-31 2 1 SS-32 SS-33 SS-34 SS-35 SS-36 SS-37 SS-38 SS-40 SS-42 SS-86 2 1 SS-87 2 1 SS-5 SS-11 1 2 795 SS-8 SS-16 CT #T064 EXCT TUET ESS TOOLING eideman & ehrens Type
Index General Information................... 1 112 Series - ound Tooling.............. 2 112 Series - Shape Tooling............. 3 114 Series - ound Tooling.............. 4 114 Series - Shape Tooling.............. 5 (111, 113, 115, 116, 117 Tooling Limited vailabillity) 212 Series - ound Tooling............. 6 212 Series - Shape Tooling............. 7 Urethane Strippers/unch and Die Shims... 8 Multi Station Tooling....................9 Forming Tool Examples..... See ack Cover Shearproof unches....... See ack Cover Mate is a Trademark of Mate unch and Die Company. equired Ordering Information 1. Type of MCHINE & MODEL. 2. Type of TOOL (eg. punch, die, stripper, etc.) and T NUME if available. 3. SHE of Tool (round, rectangle, square, etc.) specials see front and back cover or supply drawing. 4. DIMENSIONS of SHE - looking at face of the die or component part. 5. DIE CLENCE required - or TYE of MTEIL and THICKNESS being punched. 6. KEYING LOCTION - if other than standard. 7. If FOMING - up or down. DIE CLENCE Is the total space between punch and die. Die clearance is governed by the thickness and tensile strength of work piece material. UNCHES Can be supplied with or without shear. EIDEMN EHENS 0 90 315 45 270 90 225 135 180 HEN ODEING TOOLING ITH KEYING OTHE THN STNDD, SECIFY SHE LOCTION Y DEGEE USING THIS DIGM 135 45 180 0 225 315 270 HEN ODEING TOOLING ITH KEYING OTHE THN STNDD, SECIFY SHE LOCTION Y DEGEE USING THIS DIGM ONTIO EXCT ECISION ODUCTS LTD. 3115 Kennedy oad Scarborough, Ontario, Canada M1V 4Y1 Telephone: (416) 291-1942 Toll Free: 1-800-268-5573 Fax: (416) 291-8387 Toll Free Fax: 1-800-668-9314 To Order QUEEC & MITIMES ODUITS DE ÉCISION EXCT LTÉE. 5965 Chemin St. François Ville St. Laurent, Québec, H4S 16 Téléphone: (514) 333-0146 (Sans Frais) 1-800-361-6810 Québec, N.. -.E.I. & N.S. (Toll Free) Télécopieur (514) 333-0147 Email: info@exactapunch.com ebsite: www.exactapunch.com
General Information Standard Shapes and Shape Codes 100 OLONG 200 SQUE 300 ECTNGLE 400 SINGLE D 500 FLTTED OUND 650 HEXGON 665 QUD D 670 OCTGON 680 EQULTEL 795 LONG D SECIFY INDEXING EQUIED ON 400, 680 ND 795 Other Tooling Styles vailable OLD STYLE NE STYLE CUENT NUME FO ESSES CUENT NUME FO ESSES 111 41, 41, 44, 15 112 25 SEIES 41, 41, 44, 15 113 5, 6, 61, 61, 30 114 61, 61, 30, NC40 115 7, 8, 101 116 7, 8 117 2, 4 119 6 ED Metric ehrens Tooling also available. DDITIONL CHGES LY FO ELO MINIMUM STNDD SIZES EXT KEYYS O FLTS KEYING OTHE THN 90 O 45 EXT DOELS IN DIES KEYING DIES OTHE THN 90 O 45 NON STNDD SHE STYLE ND STTION SHE DETH (CONCVE) 112 ND 114 NONE EQUIED 112C (OUND UNCH ONLY).04/.06" 112D/G.04/.06" 114C.04/.06" 114D/L.08/.10" DVISE HEN UNCHING 3/16 O THICKE MTEIL IONITIDING VILLE EXSET COTING (GOLD) VILLE UETHNE SHEDDES SULIED HEE LICLE SECIL SHES - USE NUMES ON FONT ND CK COVES 1
112 Series - ound Tooling Station - ound unches and Sleeves TOOL # D L NGE T18 3/16" 1-13/16".031" TO.156" T25 1/4" 1-13/16".157" TO.218" T31 5/16" 1-13/16".219" TO.281" T37 3/8" 1-13/16".282" TO.344" SLEEVE # I.D. O.D. L TS18 3/16" 5/8".940" TS25 1/4" 5/8".940" TS31 5/16" 5/8".940" TS37 3/8" 5/8".940" Station & C - ound unches STN. TOOL # D L NGE T62 5/8" 2-13/16".093" TO.625" T62-1 5/8" 2-13/16".626" TO 1.000" C T93 15/16" 3-5/32" 1.001" TO 1.500" Station D, E, F, G & H - ound unches STN. TOOL # D L NGE D T162 1-5/8" 2-1/16" 1.501" TO 2.000" E T275 2-3/4" 2-1/16" 2.001" TO 2.750" F T275-1 2-3/4" 2-1/16" 2.751" TO 3.125" G T312 3-1/8" 2-1/16" 3.126" TO 3.500" H T350-2 3-1/2" 2-1/16" 3.501" TO 4.000" 112 Series - ound Dies STN. TOOL # OD HT NGE TD106-2 1-1/16".593.035" TO.662" TD156-2 1-9/16".593.070" TO 1.037" C TD225-2 2-1/4".593 1.004" TO 1.537" D TD275-2 2-3/4".750 1.504" TO 2.037" E TD350-2 3-1/2".750 2.004" TO 2.537" F TD425-2 4-1/4".750 2.504" TO 3.162" G TD475-2 4-3/4".750 3.129" TO 3.537" H TD512-2 5-1/8".750 3.504" TO 4.037" 2
112 Series - Shape Tooling MINIMUM IDTH =.125 MXIMUM DIMENSION.C. = LGEST DIMENSION Station & C - Shape unches efer to page 1 for standard shape codes. STN. TOOL # D L MX. (C) TZ62 _ 5/8" 2-13/16" 1.000 C TZ93 _ 15/16" 3-5/32" 1.500 SECIFY SHE CODE IN LCE OF _ Station D, E, F, G & H - Shape unches efer to page 1 for standard shape codes. STN. TOOL # D L MX. (C) D TZ162-1 _ 1-5/8" 2-1/16" 2.000 E TZ275-1 _ 2-3/4" 2-1/16" 2.750 F TZ275-1 _ 2-3/4" 2-1/16" 3.125 G TZ312-1 _ 3-1/8" 2-1/16" 3.500 H TZ350-2 _ 3-1/2" 2-1/16" 4.000 SECIFY SHE CODE IN LCE OF _ 112 Series - Shape Dies efer to page 1 for standard shape codes. STN. TOOL # OD HT MX. (C) TDZ106-2 _ 1-1/16".593.662 TDZ156-2 _ 1-9/16".593 1.037 C TDZ225-2 _ 2-1/4".593 1.537 D TDZ275-2 _ 2-3/4".750 2.037 E TDZ350-2 _ 3-1/2".750 2.537 F TDZ425-2 _ 4-1/4".750 3.162 G TDZ475-2 _ 4-3/4".750 3.537 H TDZ512-2 _ 5-1/8".750 4.037 SECIFY SHE CODE IN LCE OF _ 3
114 Series - ound Tooling Station - ound unches and Sleeves TOOL # D L NGE T56 9/16" 2-23/32".093" TO.500" SLEEVE # I.D. O.D. L TS56 9/16" 1-1/16" 1.120" Station & C - ound unches NOTE: Diameters above.500 standard with urethane shedders. STN. TOOL # D L NGE T106 1-1/16" 4".125" TO 1.000" C T131 1-5/16" 4-1/16" 1.001" TO 1.500" Station D, E & F - ound unches STN. TOOL # D L NGE D T175-4 1-3/4" 3-17/32" 1.501" TO 2.000" E T250 2-1/2" 3-17/32" 2.001" TO 2.500" F T250-1 2-1/2" 3-17/32" 2.501" TO 3.000" Station G, H, J, K & L - ound unches NOTE: G and H Station unch Holders are available for 3-1/2" and 4-1/8" body diameter punches. Customer must specify T350 or T412 Style. STN. TOOL # D L NGE G T350 3-1/2" 3-17/32" 3.001" TO 3.500" H T350-1 3-1/2" 3-17/32" 3.501" TO 4.125" G T412 4-1/8" 3-17/32" 3.001" TO 3.500" H T412-1 4-1/8" 3-17/32" 3.501" TO 4.125" J T412-2 4-1/8" 3-17/32" 4.126" TO 4.750" K T537 5-3/8" 3-17/32" 4.751" TO 5.500" L T537-1 5-3/8" 3-17/32" 5.501" TO 6.000" 114 Series - ound Dies STN. TOOL # OD HT NGE & TD156-4 1-9/16" 1.125.097" TO 1.040" C TD225-4 2-1/4" 1.125 1.004" TO 1.540" D TD275-4 2-3/4" 1.125 1.504" TO 2.040" E TD350-4 3-1/2" 1.125 2.004" TO 2.540" F TD400-4 4" 1.125 2.504" TO 3.040" G TD450-4 4-1/2" 1.125 3.004" TO 3.540" H TD525-4 5-1/4" 1.125 3.504" TO 4.165" J TD600-4 6" 1.125 4.129" TO 4.090" K TD700-4 7" 1.125 4.754" TO 5.540" L TD750-4 7-1/2" 1.125 5.504" TO 6.040" 4
114 Series - Shape Tooling MINIMUM IDTH =.125 MXIMUM DIMENSION.C. = LGEST DIMENSION Station & C - Shape unches efer to page 1 for standard shape codes. STN. TOOL # D L MX. (/C) TZ106 _ 1-1/16" 4" 1.000 C TZ131 _ 1-5/16" 4-1/16" 1.500 SECIFY SHE CODE IN LCE OF _ Station D, E & F - Shape unches efer to page 1 for standard shape codes. STN. TOOL # D L MX. (/C) D TZ175-4 _ 1-3/4" 3-17/32" 2.000 E TZ250-4 _ 2-1/2" 3-17/32" 2.500 F TZ250-1 _ 2-1/2" 3-17/32" 3.000 SECIFY SHE CODE IN LCE OF _ Station G, H, J, K & L - Shape unches NOTE: G and H Station unch Holders are available for 3-1/2" and 4-1/8" body diameter punches. Customer must specify TZ350 or TZ412 Style. STN. TOOL # D L MX. (/C) G TZ350 _ 3-1/2" 3-17/32" 3.500 H TZ350-1 _ 3-1/2" 3-17/32" 4.125 G TZ412-1 _ 4-1/8" 3-17/32" 3.500 H TZ412-1 _ 4-1/8" 3-17/32" 4.125 J TZ412-2 _ 4-1/8" 3-17/32" 4.750 K TZ537-1 _ 5-3/8" 3-17/32" 5.500 L TZ537-1 _ 5-3/8" 3-17/32" 6.000 114 Series - Shape Dies efer to page 1 for standard shape codes. STN. TOOL # OD HT MX. (/C) & TDZ156-4 _ 1-9/16" 1.125 1.040 C TDZ225-4 _ 2-1/4" 1.125 1.540 D TDZ275-4 _ 2-3/4" 1.125 2.040 E TDZ350-4 _ 3-1/2" 1.125 2.540 F TDZ400-4 _ 4" 1.125 3.040 G TDZ450-4 _ 4-1/2" 1.125 3.540 H TDZ525-4 _ 5-1/4" 1.125 4.165 J TDZ600-4 _ 6" 1.125 4.790 K TDZ700-4 _ 7" 1.125 5.540 L TDZ750-4 _ 7-1/2" 1.125 6.040 SECIFY SHE CODE IN LCE OF _ 5
212 Series - ound Tooling Station TOOL # D L NGE T18 3/16" 1-13/16".031" TO.156" T25 1/4" 1-13/16".157" TO.218" T31 5/16" 1-13/16".219" TO.281" T37 3/8" 1-13/16".282" TO.344" SLEEVE # I.D. O.D. L TS18 3/16" 5/8".940" TS25 1/4" 5/8".940" TS31 5/16" 5/8".940" TS37 3/8" 5/8".940" Station & C - ound unches STN TOOL # D L NGE T62 5/8" 2-13/16".093" TO.625" T62-1 5/8" 2-13/16".626" TO 1.000" C T93 15/16" 3-5/32" 1.001" TO 1.500" Station D, E, F & G - ound unches STN. TOOL # D L NGE D T125 1-1/4" 3-19/32" 1.501" TO 2.000" E T175 1-3/4" 3-19/32" 2.001" TO 2.750" F T175-1 1-3/4" 3-19/32" 2.751" TO 3.125" G T200 2" 3-19/32" 3.126" TO 3.500" 212 Series - ound Dies STN. TOOL # OD HT NGE TD106-2 1-1/16".593.035" TO.662" TD156-2 1-9/16".593.097" TO 1.037" C TD225-2 2-1/4".593 1.004" TO 1.537" D TD275-2 2-3/4".750 1.504" TO 2.037" E TD350-2 3-1/2".750 2.004" TO 2.537" F TD425-2 4-1/4".750 2.504" TO 3.162" G TD475-2 4-3/4".750 3.129" TO 3.537" 6
212 Series - Shape Tooling MINIMUM IDTH =.125 MXIMUM DIMENSION.C. = LGEST DIMENSION Station & C - Shape unches efer to page 1 for standard shape codes. STN. TOOL # D L MX. (/C) TZ62 _ 5/8" 2-13/16" 1.000 C TZ93 _ 15/16" 3-5/32" 1.500 SECIFY SHE CODE IN LCE OF _ Station D, E, F & G - Shape unches efer to page 1 for standard shape codes. STN. TOOL # D L MX. (/C) D TZ125-1 _ 1-1/4" 3-19/32" 2.000 E TZ175-1 _ 1-3/4" 3-19/32" 2.750 F TZ175-1 _ 1-3/4" 3-19/32" 3.125 G TZ200-1 _ 2" 3-19/32" 3.500 SECIFY SHE CODE IN LCE OF _ 212 Series - Shape Dies efer to page 1 for standard shape codes. STN. TOOL # OD HT MX. (/C) TDZ106-2 _ 1-1/16".593.662 TDZ156-2 _ 1-9/16".593 1.037 C TDZ225-2 _ 2-1/4".593 1.537 D TDZ275-2 _ 2-3/4".750 2.037 E TDZ350-2 _ 3-1/2".750 2.537 F TDZ425-2 _ 4-1/4".750 3.162 G TDZ475-2 _ 4-3/4".750 3.537 SECIFY SHE CODE IN LCE OF _ 7
Urethane Strippers for iedeman -20, -30, -45 Quantum 2000 & Centrum 1000 O.D. I.D. O..L. FCE DI. For 112 Style Tooling For 114 Style Tooling 8 SHE T NO. O..L. I.D. O.D. FCE DI. T NO. O..L. I.D. O.D. FCE DI. STD. 2 1-27/32 31/32 2 1-5/32 4 (1) 2-1/4 1-1/16 1-31/32 1-1/8 C STD. 2C 2-1/16 1-15/32 2-1/2 1-23/32 4C (1) 2-5/16 1-3/4 2-1/2 1-23/32 STD. 2D 1-1/2 1-31/32 3 2-7/32 4D 2-3/32 1-31/32 3 2-7/32 D 1" SQ. * 2SQD 1-1/2 1-31/32 3 2-7/32 4SQD 2-3/32 1-31/32 3 2-7/32 ECT. * * 2D 1-1/2 1-31/32 3 2-7/32 4D 2-3/32 1-31/32 3 2-7/32 E STD. 2E 1-1/2 3-3/32 4-9/32 2-29/32 4E 2-3/32 2-31/32 4 2-29/32 ECT. * * 2E 1-1/2 3-3/32 4-9/32 2-29/32 4E 2-3/32 2-31/32 4 2-29/32 STD. 2F 1-1/2 3-3/32 4-9/32 3-11/16 4F 2-3/32 2-31/32 4 3-9/32 F SQ. * 2SQF 1-1/2 3-3/32 4-9/32 3-11/16 4SQF 2-3/32 2-31/32 4 3-9/32 ECT. * * 2F 1-1/2 3-3/32 4-9/32 3-11/16 4F 2-3/32 2-31/32 4 3-9/32 STD. 2G 1-1/2 3-15/32 4-25/32 4-3/16 4G 2-3/32 4-11/32 5-5/32 3-25/32 G 2" SQ. * 4SQG 2-3/32 4-11/32 5-5/32 3-25/32 ECT. * * 2G 1-1/2 3-15/32 4-25/32 4-3/16 4G 2-3/32 4-11/32 5-5/32 3-25/32 H STD. 4H 2-3/32 4-11/32 5-5/32 4-17/32 ECT. * * 4H 2-3/32 4-11/32 5-5/32 4-17/32 J STD. 4J 2-3/32 4-23/32 5-13/16 5-11/32 ECT. * * 4J 2-3/32 4-23/32 5-13/16 5-11/32 K STD. 4K 2-3/32 5-23/32 6-5/8 6-3/8 ECT. * * 4K 2-3/32 5-23/32 6-5/8 6-3/8 * 1" & 2" SQUES ONLY (1) C/ ES * * 1/2" & NOE ECTNGLES ONLY iedeman and ehrens unch and Die Shims / 112, 212 & 114 Style Tools STYLE 112 112 / 212 212 114 114 114 STTION UNCH DIE UNCH UNCH DIE SHEOOF UNCH 24-S2 12-DS2 24-S2 24-S4 12-DS6 24-S2 12-DS6 24-S2 24-S4 12-DS6 C 24-S2C 12-DS6C 24-S2C 24-S4C 12-DS6C D 12-S2D 12-DS6D 12-S3D 12-S4D 12-DS6D E 12-S2F 12-DS6E 12-S3F 12-S4F 12- DS6E F 12-S2F 12-DS2F 12-S3F 12-S4F 12-DS4F 6-S4FNS G 12-S2G 6-DS2G 12-S3G 12-S4J 6-DS4G 6-S4GNS H 6-DS2H 12-S4J 6-DS4H J 12-S4J 6-DS4J 6-S4JNS K 6-S4L 6-DS4K L 6-S4L 6-DS4L SHIMS E NOT SOLD IN QUNTITIES LESS THN G UNCH SHIMS E 1/16" THICK DIE SHIMS E 1/32" THICK
Multi Station unches and Dies 6 Station - 1.063-27.0 mm unch ody 1.563-39.8 mm unch Length efer to page 1 for standard shape codes NGE.020-1.000 DESCITION Mate ef. # T NO. UNCH OUND OV0 VT106 SHE OV _ VTZ106 _ DIE OUND DOV00 VTD118 SHE DOV VTDZ118 _ SECIFY SHE CODE IN LCE OF _ 8 Station -.812-20.6 mm unch ody 1.375-34.9 mm unch Length efer to page 1 for standard shape codes NGE.020 -.750 DESCITION Mate ef. # T NO. UNCH OUND OVV0 VT81 SHE OVV _ VTZ81 _ DIE OUND DOVV00 VTD93 SHE DOVV _ 0 VTDZ93 _ SECIFY SHE CODE IN LCE OF _ 12 Station -.562-13.2 mm unch ody 1.375-34.9 mm unch Length efer to page 1 for standard shape codes NGE.020 -.500 DESCITION Mate ef. # T NO. UNCH OUND OVT0 VT56 SHE OVT _ VTZ56 _ DIE OUND DOVT00 VTD68 SHE DOVT _ 0 VTDZ68 _ SECIFY SHE CODE IN LCE OF _ Note: Multi Station punches and dies are keyed one way only. lease Specify X (Tangent) or Y axis (adial). X XIS Y XIS Mate is a Trademark of Mate unch and Die Company. 9
SS-43 SS-45-545 SS-50 D SS-54 SS-56 SS-59 SS-60 SS-61 10 D CONE HEEL -450 I L EDGE HEEL SINGLE KNOCK OUT SHE KNOCK OUT SHE CLUSTE OUND CLUSTE Forming Tools EXMLES ND SHE CODES -625 DIMLE -548 H LOUVE SS-98 IDGE LNCE -855 * COUNTESINK -654 DIMLE -625 * EXTUSION -675 EYEO -460 SHE T -755 EMOSS U -675 CD GUIDE SS-97 LNCE ND FOM (ONE END) -440 LNCE ND FOM (THEE ENDS) -445 I -370 EMOSS -755 * THED FOM -380 EXTUDE U -655 1 2 3 4 5 LETTE STM -658 C'SINK U -440 COINING U -654 SHE T -548 CHCTE STM -725 * MUST HVE E IECED HOLE * EMOSS U EXTUDE DON -775 CLOSED END LOUVE -450 OEN END LOUVE (LNCE) -455 LNCE & FOM -443 COINING DON SS-94 CENTE UNCH SS-93 DIUS CONE SS-92 4-Y CONE DIUS SS-91 DOULE DIUS CUT OFF Exacta recision roducts Ltd. 3115 Kennedy oad Scarborough, Ontario, Canada M1V 4Y1 Telephone: (416) 291-1942 Toll Free: 1-800-268-5573 Fax: (416) 291-8387 Toll Free Fax: 1-800-668-9314 TOONTO Shearroof unches For unching or Notching up to 3/16 Material. Shearroof unches have Spring Loaded Heels (Guides which extend below the unch Cutting Edge). Each Heel can retract independently to make it s cutting edge coincide with the unch Cutting Edge. hen Nibbling or Notching, the Heels which do not contact material, extend into the Die to serve as Guides to stop side thrust. hen unching a hole in the centre of the sheet all Heels retract making all Cutting Edges continuous. vailable in 112 and 114 Styles as full bodied unches or as unch ody etainer with replaceable unch Face and Heels. Exacta roduits de récision Ltée. 5965 Chemin St. François Ville St. Laurent, Québec, Canada H4S 16 Téléphone: (514) 333-0146 (ucun Frais): 1-800-361-6810 Québec, N..,..E.I. & N.S. (Toll Free) Télécopieur: (514) 333-0147 ebsite: www.exactapunch.com E-mail: info@exactapunch.com LNCE & FOM -857 HINDGE -460 EYE O -766 DOULE KO U -765 DOULE KO DON