Sensorlampe og Downlight Steinel sensorlampe - IP21 (IP44) El-nummer EAN-nummer RS16L 60W E27 H95 Ø275 - (IP44) A 4243738013 4007841738013 RS14L 60W E27 H110 Ø280 A 4243731113 4007841731113 RS Pro 500 2x13W HF H100 Ø280 B 4243732615 4007841732615 Væg/loftarmatur med indbygget pir detektor. Skumringsindstilling 2-2000 lux tidsinds. RS14-RS16 5 sek til 15 min. RS PRO tidsinds. 1min til 20min. RS14L og RS PRO er godkendt for fælles adgangsvej. RS Pro 500 slave 2x13W HF H100 Ø280 B 4243732714 4007841732714 RS Pro 1000 2x18W HF H125 Ø310 B 4243736514 4007841736514 RS Pro 1000 slave 2x18W HF H125 Ø310 B 4243736613 4007841736613 Galvano Galv. Downlight - IP44 El-nummer EAN-nummer Downlight i galvaniseret stål med E14 eller E27 sokkel velegnet til udhæng. Galvano mini 40W E14 H140 Ø100 A 4241355972 5701581355972 Galvano 60W E27 H160 Ø130 A 4241204966 5701581204966 Insaver Downlight - op IP20 / ned IP44 El-nummer EAN-nummer 150 Topper 1x10/13W G24d1 H90 Ø170 A 8042023461 8711971234609 Hvid dækring. Metal og polycarbonat. Skrueløs fastgørelse i loft. Tilslutningsdåse med indstiksklemme. Afskærmning. Topper: opal buet. Cone: prismatisk forsænket. HF typer kan leveres. 150 Cone 1x10/13W G24d1 H90 Ø170 A 8042023445 8711971234401 16 JENS A. TELEFON 9633 1700 - TELEFAX 9633 1701 -
Downlight Chalice 190 Downlight - op IP20 / ned IP23 El-nummer EAN-nummer 1x18W G24d2 hvid H100 Ø205 A 4242144998 5703491144998 2x18W G24d2 hvid H100 Ø205 A 4242144974 5703491144974 Downlight udført i kunststof, armaturring i hvid kunststof. Lyskilden er vandret liggende. Alle downlights kan leveres med dæmpbare HF forkoblinger både 0-10 V for analog og digital dæmpning. Der findes desuden et stort tilbehørsprogram. Andre wattager på forespørgsel. 1x26W G24d3 hvid H100 Ø205 A 4242144950 5703491144950 1x18W HF G24q2 hvid H100 Ø205 B 4242144981 5703491144981 2x18W HF G24q2 hvid H100 Ø205 B 4242144967 5703491144967 1x26W HF G24q2 hvid H100 Ø205 B 4242144943 5703491144943 2x26W HF G24q3 hvid H100 Ø205 B 4242144929 5703491144929 Decoplade PC opal polycarbonatplade A 4242146428 5703491146428 Decoplade PC klar polycarbonatplade B 4242146411 5703491146411 Decoplade frosted glas plade B 4242132490 5703491132490 Decoplade dobbelring B 4242104404 5703491104404 DCH-R 175 Downlight - IP20 El-nummer EAN-nummer 1x18W G24d2 hvid H100 Ø195 A 4242600258 5705318002580 2x18W G24d2 hvid H100 Ø195 A 4242600261 5705318002610 Højtydende downlight af forzinket stålplade med reflektor i højglanspoleret alu. Kan på forespørgsel leveres med HF / HFD spoler. 1x26W G24d3 hvid H100 Ø195 A 4242600274 5705318002740 JENS A. TELEFON 9633 1700 - TELEFAX 9633 1701-17
RS 16 L print clos Clean-cut design, ideal for corridors, halls or stairwells. Whether as ceiling or wall light, elegant, hand-blown glass shades create a warm, even light. This is how they work Invisibly concealed inside, cutting-edge high-frequency sensor technology responds to the slightest movement irrespective of temperature, instantly switching the light "ON" and, after a programmable time, "OFF" again. Settings Infinitely variable, electronic reach adjustment from 1 8 metres in diameter. Control dials for easy adjustment of light 'on' duration and twilight threshold. Installation advantages Straightforward installation (light and sensor = 1 connection) Facility for connecting additional loads (e.g. bathroom/wc extractor fan) Bulb can be changed without the need for tools as the glass shade is held in place by a screwless bayonet fitting. Material High-quality finish White, hand-blown Topal glass shade Base in high-quality die-cast aluminium or high-quality plastic (RS 16 L) Main features of SensorLights Easily mounted to walls or ceilings Twilight setting Time setting Reach setting Detection zone for wall and ceiling mounting The 360 detection zone with an aperture angle of 160 and reach of up to 8 m reliably watches over
RS 16 L Prod. No. 738013 Dimensions (hxwxd) 275 mm dia. x 95 mm Output 60 W max. / E 27 + 100 W max. / e.g. bathroom/ WC extractor fan Transmission power approx. 1 mw HF-System 5,8 GHz Enclosure IP 44 Protection class II Voltage 230 240 V/50 Hz Angle of coverage 360 with 160 aperture angle also through glass, wood and stud walls Reach 1 8 m dia., infinitely variable Twilight setting 2 2000 lux Time setting 5 sec. 15 min.
RS 14 L impact-resistant Download Operating instructions Print version back Sensor Technology for Professionals ::: Motion Detectors - The Professional Series ::: Motion Detectors - The Reference Class ::: Motion Detectors - Basic Series for Professionals ::: Light Management ::: RELUX Planning Software ::: Air Quality Sensors ::: SensorLights for Outdoor Use ::: Wireless Sensor System SensorLights for Indoor Use ::: High-frequency SensorLights for wall and ceiling mounting Summary RS 104 L RS 105 L RS 106 L RS 107 / 108 / 109 / 110 L RS 10 L RS 10-4 L RS 10-5 L RS 10-6 L stainless steel RS 10-9 L stainless steel RS 10-11 L stainless steel RS 14 L impact-resistant RS 15 L Campaign RS PRO 500 RS PRO 1000 ::: High-frequency SensorLights for bath, wardrobe, stairway or hall Robustly practical The RS 14 L light is designed for use in rugged environments. Its impactresistant plastic cover protects it from deliberate or inadvertent damage. RS 14 L in impact-resistant plastic Technical Data RS 14 L - impact-resistant Prod. No. 731113 Dimensions Ø 280 x 110 mm Voltage 230-240 V, 50 Hz Output ceiling 75 W max. / E 27 Output wall 60 W max. / E 27 HF system 5.8 GHz (responds to the tiniest movement regardless of temperature) Angle of coverage 360 with 160 angle of aperture Transmitter power approx. 1 mw Reach 1 8 m, infinitely variable Max. area covered approx. 50 m2 Time setting 5 sec. 15 min. Twilight setting 2 2000 Lux Enclosure IP 44 Protection class II Permanent light Brightness control Special features other loads can be connected (100 VA max., e.g. bathroom / WC extractor fan or additional light) :::Internal Sales Area :::Contact :::Imprint :::Privacy Policy :::Home 2007 STEINEL Vertrieb GmbH
::: Sensor Technology for Professionals :::Sensor Technology for Professionals :::Heat Tools for Professionals :::Sensor Technology for DIYers :::Heat Tools for DIYers RS PRO 500 Sensor / Slave Download Operating instructions Print version back Sensor Technology for Professionals ::: Motion Detectors - The Professional Series ::: Motion Detectors - The Reference Class ::: Motion Detectors - Basic Series for Professionals ::: Light Management ::: RELUX Planning Software ::: Air Quality Sensors ::: SensorLights for Outdoor Use ::: Wireless Sensor System SensorLights for Indoor Use ::: High-frequency SensorLights for wall and ceiling mounting Summary RS 104 L RS 105 L RS 106 L RS 107 / 108 / 109 / 110 L RS 10 L RS 10-4 L RS 10-5 L RS 10-6 L stainless steel RS 10-9 L stainless steel RS 10-11 L stainless steel RS 14 L impact-resistant RS 15 L Campaign RS PRO 500 RS PRO 1000 ::: High-frequency SensorLights for bath, wardrobe, stairway or hall RS PRO SYSTEM Our HF-technology, consistently advanced for professional needs. The RS PRO SYSTEM comes with state-of-the-art HFsensor technology combined with innovative features for professional applications. Once installed, the system provides the last word in energy efficiency and flexibility. RS PRO SYSTEM indoor lights operate on lowenergy bulbs and high-performance electronic ballasts. The RS PRO 500 has 2x13W and one electronic ballast. The HF-sensor is invisible from the outside and offers greater precision, speed and reach than an infrared sensor in this type of indoor light. Light is automatically switched 'ON' and 'OFF' when needed. Light 'ON' duration and twilight threshold can be adjusted to any setting you choose. Current light level can also be saved as the twilight threshold. The system can be used in network applications and features additional modules with 24 LEDs for mains-operated and even mainsindependent orientation light (e.g. if a fuse is tripped or in the event of power failure). You can also install a wired network of several sensor lights and slave options of the RS PRO Series without sensor. 2 x 13W low-energy bulbs Unique interconnectability Impact-resistant Technical Data RS PRO 500 Sensor / Slave Prod. No. RS PRO 500 Sensor 732615 Prod. No. RS PRO 500 Slave 732714 Dimensions (h x w x d) 280 x 280 x 110 mm Voltage 230-240 V / 50 Hz Output 2 x 13 W / TC-DEL G 24-Q1 *1 (1 electronic ballast) HF-system 5,8 GHz (responds to the tiniest movement regardless of temperature) *2 Angle of coverage 360 with 160 aperture angle *2 Transmitting power approx. 1 mw *2 Reach infinitely variable from 1 8 m Ø in 4 directions *2 Max. area covered approx. 50 m *2 Time setting 1 min. 20 min. + Install mode *2 Twilight setting 2 2000 lux, teach-in mode *2 Enclosure IP 44 Protection class II Special features other loads can be connected (1000 W max., e.g. bathroom/wc extractor fan or additional light) Accessories Orientation light module 500/1000 MLED1 with 24 LEDs Prod. No. 732813 Orientation light module (rechargeable battery) 500/1000 MLED1A for mainsindependent orientation light Prod. No. 732912 *1 Bulb life is not affected by being switched 'ON' and 'OFF'. *2 Only RS PRO 500/1000 Sensor.
Variety of applications for RS PRO SYSTEM The lamps in the RS PRO series permit local intelligent light controls with maximum energy efficiency. Every single lamp can control itself as required. RS PRO 500 and RS PRO 1000 lamps with and without sensor can be networked via switched lines. In the case of the RS PRO 1000 this interconnection can also be realised in wireless bidirectional form using wireless modules. All of the benefits at a glance: Automatic light whenever it is needed Maximum energy efficiency Sensor and slave lamps can be combined cost-efficiently Orientation light modules as required Optional wireless networkability (e.g. for renovation projects) The modulare construction kit RS PRO 500 sensor 2 x 13 W with 1 electronic ballast RS PRO 500 slave 2 x 13 W with 1 electronic ballast Orientation light module 24 LEDs (optional) Orientation light module battery 24 LEDs, up to 8 h batterysupplied (optional) :::Internal Sales Area :::Contact :::Imprint :::Privacy Policy :::Home 2007 STEINEL Vertrieb GmbH
RS PRO 1000 Sensor / Slave Download Operating instructions Print version back Sensor Technology for Professionals ::: Motion Detectors - The Professional Series ::: Motion Detectors - The Reference Class ::: Motion Detectors - Basic Series for Professionals ::: Light Management ::: RELUX Planning Software ::: Air Quality Sensors ::: SensorLights for Outdoor Use ::: Wireless Sensor System SensorLights for Indoor Use ::: High-frequency SensorLights for wall and ceiling mounting Summary RS 104 L RS 105 L RS 106 L RS 107 / 108 / 109 / 110 L RS 10 L RS 10-4 L RS 10-5 L RS 10-6 L stainless steel RS 10-9 L stainless steel RS 10-11 L stainless steel RS 14 L impact-resistant RS 15 L Campaign RS PRO 500 RS PRO 1000 ::: High-frequency SensorLights for bath, wardrobe, stairway or hall RS PRO 1000 lights operate on 2x18W low-energy bulbs and 2 separate electronic ballasts. A particularly interesting feature is the option of bi-directional networking using wireless modules that plug into the lights. With 32 channels to choose from, complex network groups can be set up within the building. Needless to say, networks can also be wired as with the RS PRO 500. 2 x 18W low-energy bulbs Unique interconnectability As well as with optional wireless module Impact-resistant Can also be wire-linked with the RS PRO 500 Technical Data RS PRO 1000 Sensor / Slave Prod. No. RS PRO 1000 Sensor 736514 Prod. No. RS PRO 1000 Slave 736613 Prod. No. RS PRO G 1000 Sensor 736811 (glas) Prod. No. RS PRO G 1000 Slave 736910 (glas) Dimensions (h x w x d) 310 x 310 x 125 mm Voltage 230-240 V / 50 Hz Output 2 x 18 W / TC-DEL G 24-Q1 *1 (2 electronic ballast) HF-system 5,8 GHz (responds to the tiniest movement regardless of temperature) *2 Angle of coverage 360 with 160 aperture angle *2 Transmitting power approx. 1 mw *2 Reach infinitely variable from 1 8 m dis. in 4 directions *2 Max. area covered approx. 50 m *2 Time setting 2 min. 20 min. + Install mode *2 Twilight setting 2 2000 lux, teach-in mode *2 Enclosure IP 44 Protection class II Special features other loads can be connected (1000 W max., e.g. bathroom/wc extractor fan or additional light) Accessories Orientation light module 500/1000 MLED1 with 24 LEDs Prod. No. 732813 Orientation light module (rechargeable battery) 500/1000 MLED1A for mains-independent orientation light Prod. No. 732912 Wireless module MF1 for interconnecting several lights, 868 MHz FM modulation, redundant information transmission, 100 m max. Prod. No. 736712 *1 Bulb life is not affected by being switched 'ON' and 'OFF'. *2 Only RS PRO 500/1000 Sensor.
Variety of applications for RS PRO SYSTEM The lamps in the RS PRO series permit local intelligent light controls with maximum energy efficiency. Every single lamp can control itself as required. RS PRO 500 and RS PRO 1000 lamps with and without sensor can be networked via switched lines. In the case of the RS PRO 1000 this interconnection can also be realised in wireless bidirectional form using wireless modules. All of the benefits at a glance: Automatic light whenever it is needed Maximum energy efficiency Sensor and slave lamps can be combined cost-efficiently Orientation light modules as required Optional wireless networkability (e.g. for renovation projects) The modulare construction kit RS PRO 500 sensor 2 x 13 W with 1 electronic ballast RS PRO 500 slave 2 x 13 W with 1 electronic ballast Orientation light module 24 LEDs (optional) Orientation light module battery 24 LEDs, up to 8 h batterysupplied (optional) Wireless networking modules via 32 channels, i.e. building renovation etc.
technical data type DCH-R 175 Body: made of zinc-coated sheet. The outer-ring is made of sheet steel surface finished with white powder coating RAL 9003 (another colour on request). The springs are made of a hardened zinc-coated steel tape. Opt ic : reflector of high-polished aluminium coated by vapour deposition. Options: - Faceted reflector - Recessed glass (IP44) - Turbo parabolic reflector - Decorative sand-blasted glass - Brass or chrome outer-ring Electrical specifications: - ferromagnetic ballast and switch starters - optional: - parallel compensation - low loss ballast - HF-ballast - HFD-ballast - conversion module (1 or 3 h.) Lamps: - 1or2 x13w : TC-D (G24d-1) or TC-DEL (G24q-1) - 1or2 x18w : TC-D (G24d-2) or TC-DEL (G24q-2) - 1or2 x26w : TC-D (G24d-3) or TC-DEL (G24q-3) Easy mounting springs Adjustable rear support Faceted reflector (optional) Recessed glass IP44 (optional) Turbo parabolic refl. (optional) Decorative glass (optional) F IP20 IP44 *The dimensions shown on this document can be modified without notice. V LUX