luid oolig P-Bar Series Mobile IR OOLD brazed alumium ostructio eatures ow available with fully reversible Brushless D a Motors bar ad Plate Brazed lumium ore rugged, lightweight, ad compact provides the best heat trasfer per give evelope size while miimizig pressure drop air-side fi desig miimizes foulig ad static pressure esurig log-term, reliable performace as compliat with IP 68 (Brushed) ad IP69 (Brushless) with fully sealed motors Welded alumium fittigs/ports ad maifolds esure structural itegrity stadard S ports NPT ad BSPP ports available ustomized uits are available to meet your specific performace requiremets Optioal temperature sesors (see pg. 191) NW! optio Brushless D Optio: Loger life, water proof & sealed to IP68, spark free, quieter ad small i size. Now offerig axial fas equipped with brushless D electric motors o stadard Series! Ratigs Materials Maximum Operatig Pressure 250 psi (17 BR) Maximum Operatig Temperature 300 (150 ) luid ompatability Petroleum/mieral oils Oil/water emulsio Water/ethylee glycol ore Brazed lumium Bar ad Plate Taks 5052 lumium Nose Bar & Little Bar 3003-H lumium ir i, Plate, Turbulator & d Plate 3003-O lumium oectios lumium ore Moutig Brackets Brazed lumium Without Bypass 30/60 psi Bypass available With Bypass How to Order Model Series (R) Model Size Selected* 3 3.5 4 12 18 32 48 232 248 8 14 20 66 82 120 oectio Type 1 - NPT 2 - S 3 - BSPP Bypass (R)** Blak - No Bypass () 30-30 PSI 60-60 PSI *-8, -14, -20, -66,-82, -120 are ot available with a D fa. **Bypass available o -12, -18, -32, -48, -66, -82, -120, -232, -248 oly. (R) ***Brushless D fa is curretly available i 12V D oly. 62 ttpsales@apiheattrasfer.com 262.554.8330 www.thermaltrasfer.com Specify Motor Required Blak - No a (ore Oly) 4-12 VD 4B - 24 VD 4BL - 12 VD Brushless a***
Dimesios - a/ore PLS.35 X.47 89 x 1194) SLOT 16 PLS O-RING.75 (19.05) 3/4 NPT 3/4 BSPP O-RING 3/4 NPT 3/4 BSPP 4.47 (11) 7.64 (194.06) 7.64 (194.06) 5.29 (134.37) 6.26 (159.00).89 (22.61) 12V D N/MOTOR 8.25 (209.55) 5.31 (134.87) 4.47 (11) 5.33 (135.38) 6.14 (155.91) 7.82 (198.63).18 (4.57).18 (4.57).44 X.75 [11.18 x 19.05].44 SLOT X.75 [11.18 x 19.05] SLOT 4 PLS 4 PLS.39 10.00.39 10.00 G H G 4.51 (114.55) 3/4 NPT 3/4 BSPP 3/4 O-RING 1 1/16-12 UN-2B 1" NPT 1" BSPP 10.59 (268.99) 1.77 (44.96) 3.76 (95.50) 2.03 (51.56) 2.48 (62.99) 3.66 (92.96) 8.06 (2004.72) 1.38 (35.05) 6.14 (155.91) 12.32 (312.93) 6.26 (159.00) 5.33 (135.38) H 1.18 (29.97) 5.89 (149.62) 12V D N/MOTOR 2.03 (51.56).37 (9.40) HOL 4 PLS 2.99 (75.95) N/ MOTOR 5.98 (151.89) -232-12, -18, -32-4 6.17 (156.72) 5.29 (134.37).35 X.47 (8.89 x 1194) SLOT 16 PLS.89 (22.61) 1.77 (44.96) (850.14) 33.4733.47 (850.14) (797.05) 31.3831.38 (797.05) #16OPTIONL S OPTIONL & & RVRSIBL BYPSS RVRSIBL BYPSS 30/6030/60 1.31 33.40 (750.06) 29.5329.53 (750.06) 1.31 33.40.12 3.05.75 SLOT.44 X.44.75 XSLOT X 19.05) (11.18(11.18 X 19.05) 8 PLS 8 PLS OPPOSIT OPPOSIT SID SID.12 3.05 14" DI 14" DI 12/2412/24 VD VD N/MOTOR N/MOTOR (76.2)(76.2) L L B 76.20 18.5118.51 B 76.20 3 PLS 3 PLS 2.63 [66.70] D D 9.36 (237.74) 9.36 (237.74) (374.90) 14.7614.76 (374.90).64 (16.26).64 (16.26) 2.95 7.87 7.87 2.95 (74.93) PORT PORT (199.90) (74.93) (199.90) 7.51 7.51 (190.75) (190.75) 1.50 (38.10) 1.50 (38.10) -248.44 X.75 SLOT (11.18 X 19.05) 23.62 (600.00) 8.00 8.00 (203.20) (203.20).44 X.62 SLOT (11.18 X 15.75) 8 PLS OPPOSIT SID 31.49 (800.00) 19.96 (506.98) 24.53 (623.06) 3 PLS 19.69 (500.13) R 7.49 (190.25) B D 9.84 (249.94) (25.4) 22.21 (564.13) 20.59 (522.99) 1¼ NPT 1¼ BSPP 10.30 15.75 (400.05) 8.86 (225.04) 4.42 (112.27) 14" DI 12/24 VD N/MOTOR 7.34 (261.62) (186.44) (76.2) 1 NPT 1 BSPP (32.51) (76.2) 21.02 (533.91) 22.46 (570.48) 9.98 (253.49) 35.43 (899.92) 33.34 (846.84) OPTIONL & RVRSIBL BYPSS 30/60 PSI.12 (3.05) (32.51) Model PORT PORT 5.49 5.49 (139.45) (139.45) (25.4) (25.4) -48 1.10 (27.94) (429.0) (429.0) 8.45 8.45 (214.63) (214.63) (76.2)(76.2) 2.63 [66.70] 1¼ NPT 1¼ NPT 1¼ BSPP 1¼ BSPP (470.15) (470.15) 16.8916.89 20.8620.86 (529.84) (529.84) (32.51)(32.51) G H S.64 (186.46) 1.50 (39.12) 7.51 (190.75) D mp Draw NPT & BSPP L 12V 24V M (MM) pprox. Ship Wt lbs (kg) -3 5.7 3.6 300 (8.50) 6 (2.72) -3.5 12.5 6.3 370 (10.48) 9 (4.08) -4 12.5 6.3 363 (10.28) 16 (7.26) -12 13.82 (351) 11.97 (304) -18 15.84 (204) 13.82 (351) -32 19.69 (500) 18.46 (469) osult factory for dimesio 9.88 (251) 9.85 (250) 10.98 (279) 5.71 (145) 4.06 (103) (25) 3/4 5.00 (127) 12.5 6.3 521 (14.75) 19 (8.62) 11.89 (302) 12.01 (305) 12.82 (326) 5.87 (149) 4.99 (127) (25) 3/4 5.91 (150) 10.6 5.3 783 (22.17) 23 (10.43) 15.75 (400) 16.34 (415) 17.32 (440) 12.00 (305) 3.84 (98) 1.10 (28) 1 8.07 (205) 22.2 11.1 1368 (38.74) 28 (12.70) 1637 (46.40) 45 (20.40) 2234 (63.26) 65 (29.48) 2904 (82.24) 90 (40.80) -48 22.2 11.1-232 19.3* 9.7* -248 19.3* 9.7* Note: We reserve the right to make reasoable desig chages without otice. ll dimesios are i iches (millimeters) uless oted otherwise. *MP draw listed as per N..75 (19.05) -3.5 1.77 (44.96) IR OOLD -3 www.thermaltrasfer.com ttpsales@apiheattraasfer.com 262.554.8330 63
Dimesios - ore Oly -3.75 (19.05) 3/4"NPT 3/4"BSPP.13 (3.30).89 (22.61) 1.77 (44.96) -4.90 (22.86) 2.27 (57.66) 10.51 (266.95) 5.98 (151.88).31 DI 8 PLS 1.24 (31.5).12 (3.05).88 (22.35).88 (22.35) 6.00 (152.4) 6.26 (159.00) 7.64 (194.06).18 (4.57) 2.44 (61.98) 8.15 (207.01) 9.65 (245.11) 1 5/16-12 UN-2B 1" NPT 1" BSPP IR OOLD.36 (9.14).40 (10.16) 4.47 (11) 5.33 (135.38) 6.14 (155.96) -8, -14, -20 15.98 (405.89).35 X.47 SLOT (8.89 x 11.94) 16 PLS, 3/4"NPT, 3/4 BSPP 38 x.50 (9.65 x 12.7) SLOT 4 PLS 1.18 (29.97) 8.15 (207.01) -12 thru -120 H G.99 (25.15) (32.51) 2.48 (62.99).12 (3.05) DRIN.88 (22.35) 13.78 (350.01) 17.72 (450.09) 18.98 (482.1) 2.00 (50.8) B.75 (19.05).75 (19.05).62 (15.75) 1.77 (44.96).12 (3.05).44 x.75 (11.18 x 19.05) SLOT 8 PLS (-12, -18, -32) 1 (-48, -66, -82, -120) D B (-12, -18, -32, -48 ONLY) 3 PLS -232-248 33.47 (850.14) 31.38 (797.00) 27.53 (699.00) 1.96 (49.80) 7.87.75 (200.00) (19.10).44 x.62 (11.1 x 15.7) SLOT 16 PLS 1.25 (31.80) 29.53 (750.00).64 (16.26).99 (25.15) (25.4).99 (25.15) 8.45 (214.50) 5.49 (139.45) # 8 S 16.14 (410.00) 18.38 (466.85) 20.30 (515.62) (32.50) 1¼" NPT 1¼" BSPP PORT (65.00) 35.43 (900.00) 33.34 (846.84) 29.49 (749.05) 1.46 (37.08) 8.86.75 (225.04) (76.2) (19.10) 1.25 (31.75).64 (16.26).44 x.62 (11.10 x 15.70) SLOT 16 PLS.99 (25.15) 31.49 (799.85).99 (25.15) 10.30 7.34 (261.62) (186.44) 19.84 (504.00) 22.21 (564.00) (32.51) 24.00 (609.60) 1¼" NPT 1¼" BSPP Model B D G H 64 ttpsales@apiheattrasfer.com 262.554.8330 www.thermaltrasfer.com S NPT & BSPP pprox. Ship Wt. lbs (kg) -3 4 (1.81) -4 7 (3.18) -8 (76) 5.67 (144) 6.65 (169) 10 (4.54) -12 13.82 (351) 11.97 (304) 9.85 (250) 9.88 (251) 10.98 (279) 4.06 (103) 5.71 (145) (25) #12 3/4 5.00 (127) 15 (6.8) -14 6.00 (152) 10.00 (254) 10.98 (279) 14 (6.35) -18 15.84 (402) 13.82 (351) 12.01 (305) 11.89 (302) 12.82 (326) 4.99 (127) 5.87 (149) (25) #12 3/4 5.91 (150) 18 (8.16) -20 10.00 (254) 14.33 (364) 15.31 (389) 18 (8.16) -32 19.69 (500) 18.46 (469) 16.34 (415) 15.75 (400) 17.32 (440) 3.84 (98) 12.00 (305) (25) #16 1 8.07 (205) 28 (12.7) -48 23.69 (602) 22.09 (561) 20.12 (511) 19.76 (502) 21.02 (534) 3.85 (98) 8.00 (203) (25) #16 1 10.00 (254) 41 (18.60) -66 27.56 (700) 25.83 (656) 23.39 (594) 23.62 (600) 24.72 (628) 3.78 (96) 10.00 (254) 1.58 (40) #20 1¼ 50 (22.68) -82 31.46 (799) 27.68 (703) 25.55 (649) 27.52 (699) 26.57 (675) 5.73 (146) 10.00 (254) 2.00 (51) #24 1½ 65 (29.48) -120 31.46 (799) 39.6 (1006) 37.44 (951) 27.52 (699) 38.38 (975) 5.73 (146) 10.00 (254) 2.00 (51) #24 1½ 88 (39.92) -232 55 (24.95) -248 80 (36.29) Note: We reserve the right to make reasoable desig chages without otice. ll dimesios are i iches (millimeters) uless oted otherwise.
Performace urves Models with D a ssemblies 200,000 1.1 100,000-248-4/B -232-4/B 0.5 80,000-48-4/B 0.4 Heat Rejectio BTU/HR @ 100 TD 60,000 40,000 20,000 10,000-32-4/B -18-4/B -12-4/B -4-4/B -3.5-4/B 0.3 0.2 0.1 0.05 Heat Rejectio W/ IR OOLD -3-4/B Oil P = 5 PSI (0.34 BR) = 10 PSI (0.69 BR) = 15 PSI (1.03 BR) = 20 PSI (1.38 BR) 1,000 1 (3.79) 2 (7.57) 4 (15.14) 6 (22.71) 8 (30.28) 10 (37.85) 20 (75.71) Oil low GPM (LPM) 40 (151.42) 60 (227.12) 80 100 (302.83) (378.54) 0.005 Variable speed Brushless D fas are more efficiet tha the stadard D fas. s a result, the same thermal performace ca be achieved at lower speed/soud level. www.thermaltrasfer.com ttpsales@apiheattraasfer.com 262.554.8330 65
Performace urves Models (No a, ore Oly) 500,000 2.6 400,000-120 2.1 IR OOLD Heat Rejectio BTU/HR @ 100 TD 300,000 200,000 100,000 80,000 60,000 40,000 20,000 10,000-8 -4-14 -20-12 -82-248 -66-232 -48-32 -18 Oil P = 5 PSI (0.34 BR) = 10 PSI (0.69 BR) = 15 PSI (1.03 BR) = 20 PSI (1.38 BR) 1.6 1.1 0.5 0.4 0.3 0.2 0.1 0.05 Heat Rejectio W/ -3 5,000 1 (3.79) 2 (7.57) 4 (15.14) 6 (22.71) 8 (30.28) 10 (37.85) 20 (75.71) 40 (151.42) 60 (227.12) 80 (302.83) 100 (378.54) 200 (757.08) 0.03 400 (1514.16) Oil low GPM (LPM) 66 ttpsales@apiheattrasfer.com 262.554.8330 www.thermaltrasfer.com
Selectio Procedure Step 1 Step 2 Step 3 Determie Heat Load. Typical Rule of Thumb, - size cooler for 1/3 of the iput horsepower. Heat load may be expressed as either Horsepower or BTU/HR or W/. HP = BTU/HR 2545 BTU/HR = W x 1895 x.t.d.( ) BTU/HR = HP x 2545 Determie terig Temperature Differece. (ctual.t.d.) (.T.D.= terig oil temperature terig mbiet air temperature) The eterig oil temperature is geerally the maximum desired system oil temperature. terig air temperature is the highest mbiet ir temperature the applicatio will see, plus add ay pre-heatig of the air prior to its eterig the cooler. Pay special attetio if air is draw from the egie compartmet for coolig. id ir Velocity orrectio actor (Skip to Step 4 if usig our D a ssembly) alculate actual SPM ir Velocity or SM (Stadard ubit eet per Miute) for selectio usig the ace rea from the table. SPM ir Velocity* = SM ir low Square eet ooler ace rea SMPM = SMM Square Meter ooler ace rea (SM ir low= SPM ir Velocity x Square eet ooler ace rea) *If the ir Velocity calculated is differet tha the value i Step 4, the recheck orrected oil Pressure drop. Step 4 Step 5 Step 6 Determie the orrected Heat Dissipatio to use the urves glish Versio 100 orrected (BTU/Hr) Heat Rejectio = Heat Load x Desired x ir Velocity.T.D orrectio actor (BTU/HR) to use with selectio chart (ir actor value ot eeded if usig provided D a assembly; Omit i formula) Metric Versio orrected Heat Heatload (kw) Rejectio W = Desired ir Velocity.T.D ( ) x orrectio actor Select Model rom urves ter the Performace urves at the bottom with the GPM oil flow ad proceed upward to the adjusted Heat Rejectio from Step 4. y Model or urve o or above this poit will meet these coditios. alculate Oil Pressure Drop id the oil pressure drop correctio factor ad multiply it by the Oil Pressure Drop foud o performace curve. Listed Performace urves are based o: 50 SSU (11 cst) oil 1000 Stadard eet per Miute (SPM) (304.8 MPM) ir Velocity 100 (55.56 ) terig Temperature Differece (.T.D.) If your applicatio coditios are differet, the cotiue with the selectio procedure. IR OOLD orrectio actor 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 Oil Pressure Drop Drop orrectio 1.0 50 150 250 350 450 Viscosity (SSU) orrectio actor 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 ir Static ir orrectio Static 0 500 1000 1500 2000 2500 3000 (152.4) (304.8) (457.2) (609.6) (762.0) (914.4) ace Velocity SPM (smpm) ir Static ih2o 2.50 2.00 1.50 0.50 ir Static Pressure Drop ir Static Drop -4-12 -18-32 -48-66 -82-120 -232-248 -3-3.5-8 -14-20 0.00 0.00 0 500 1000 1500 2000 2500 (152.4) (304.8) (457.2) (609.6) (762.0) ace Velocity PM (mpm) 76.2 63.5 50.8 38.1 25.4 12.7 ir Static mmh20 www.thermaltrasfer.com ttpsales@apiheattraasfer.com 262.554.8330 67