Sense 13 Sensing solutions Measurement technologies beyond customer sectors 30th 31st October, Espoo
29/10/2013 2 Wednesday October 30 Program 9.00-10.00 Opening and plenary 10.15-11.45 Business development in sensing industry 11.45-13.00 Demonstrators, posters and lunch 13.00-15.00 Session 1: Water monitoring and modelling Session 2: PAT 15.00-15.30 Coffee break 15.30-17.30 Session 3: Microspectrometers Session 4: Imaging sensors 17.30 Transport to hotel Radisson Blu Royal Hotel 19.30 Reception cocktail dinner, Kiltasali, Helsinki Thursday October 31 9.00-10.50 Session 5: MEMS Session 6: Process measurements 10.50-11.20 Coffee break 11.20-12.30 Plenary and closing words 12.30 13.30 Lunch
29/10/2013 3 Wednesday October 30 Opening and plenary 9.00-9.10 Welcome and opening of the seminar, Juha Palve, VTT 9.10-9.20 Sensing solutions programme, Mikko Juuti, VTT 9.20-9.30 High performance microsystems programme, Aarne Oja, VTT 9.30-10.00 Innovations and applications in spectroscopy, Nick Barnett, Ocean Optics Business development in sensing industry 10.15-10.35 New business opportunities in VTT, Chris Winter, Brightstar Innovations 10.35-10.55 History of VTT s spin-off in Spectral Imaging, Esko Herrala, Specim Oy 10.55-11.05 Commercialization of Time-Gated Raman technology, Mari Tenhunen, VTT 11.05-11.15 Diagnostics sensors from printed electronics, Riku Rikkola, VTT 11.15-11.25 LightTherm strategic investor case, Petri Nyman, LightTherm Ltd. 11.25-11.35 BioNavis progressing case, Annika Jokinen, BioNavis Ltd. 11.35-11.45 Asqella Latest start-up case, Arttu Luukanen, Asqella Ltd. 11.45-13.00 Demonstrators, posters and lunch
29/10/2013 4 Wednesday October 30 Session 1: Water monitoring and modelling 13.00-13.20 Smarter water, Mona Arnold, VTT 13.20-13.40 Online monitoring- future is here now!, Erkki Lindeberg, Liqum 13.40-14.00 Industrial process water measurements, Heli Karaila, Metso Automation 14.00-14.20 Novel water sensors, Paul Mundill, AQSense 14.20-14.40 Cost-efficient water sensors and networks, Florian Edthofer, S:CAN 14.40-15.00 Water measurement needs in mining industry, Eija Saari, Outotec Session 2: PAT 13.00-13.20 VTT s highlights in PAT, Mikko Juuti, VTT 13.20-13.40 A continuous pilot factory with efficient PAT and process control: case study of direct compression, Rut Besseling, MSD 13.40-14.00 Ultra Mobile Optical Fibre Interferometry and FT-Spectrometry, Dominic Murphy, Pie Photonics 14.00-14.20 PROMIS Centre Pilot scale continuous manufacturing line, Simo-Pekka Simonaho, University of Eastern Finland 14.20-14.40 NIR spectroscopy for continuous manufacturing processes, Sven Borchert, Visiotec 14.40-15.00 Interest of real-time Spatially resolved spectroscopy for solid and liquid application in PAT, Fabien Chauchard, Indatech 15.00-15.30 Coffee break, demonstrators and posters
29/10/2013 5 Wednesday October 30 Session 3: Microspectrometers 15.30-15.50 VTT Spectral Engines, Jarkko Antila, VTT 15.50-16.10 Microspectrometer solutions, Carlos de Barros, Horiba Yobin-Yvon 16.10-16.30 Piezo-Actuated Fabry Perot Filter: Sensors and Applications, Jussi Soukkamäki, Rikola 16.30-16.50 Spectrometer technologies for future, Jason Eichenholz, OPI 16.50-17.10 Introduction to SERS applications, David Eustace, Renishaw Diagnostics Ltd 17.10-17.30 Sensing needs in patent monitoring, Hanna Viertiö-Oja, GE Healthcare Session 4: Imaging sensors 15.30-15.50 NN, Klaus Härkönen, AJAT 15.50-16.10 Sensors for combined ULF MRI and MEG -industrial view, Lauri Parkkonen, Aalto/Elekta Ltd. 16.10-16.30 Signal processing and image analysis of sensor data, Jyrki Lötjönen, VTT 16.30-16.50 Stand-off Raman spectroscopy, Ida Johansson, FOI 16.50-17.10 High performance detector arrays for colour X -ray imaging, Juha Kalliopuska, Advacam 17.10-17.30 Revolutionary modified internal gate (MIG) pixel technology, Artto Aurola, Pixpolar 17.30 Transport to hotel Radisson Blu Royal Hotel 19.30 Reception cocktail dinner, Kiltasali, Helsinki
29/10/2013 6 Thursday October 31 Session 5: MEMS 9.00-9.30 Optical gas measurements using MEMS sensors, Tomi Salo, Vaisala 9.30-9.50 Improving usability and competitivity of industrial products using MEMS sensors, Harri Vatanen, Qitec 9.50-10.10 Overview of VTT MEMS sensor solutions for industrial applications, Anu Kärkkäinen, VTT 10.10-10.30 Next generation MEMS pressure sensor products, what is needed to get one in production?, Markku Lyyra, Midsens 10.30-10.50 Product integrator's perspective to MEMS technology, Tapani Koivukangas, Lewel Group Session 6: Process measurements 9.00-9.30 Optical instruments for process industry, Jouko Malinen, VTT 9.30-9.50 Sensing needs in novel biorefinery plants, Erkki Välimäki, Metso Power 9.50-10.10 Mineral related measurement needs, Jarmo Lohilahti, Outotec 10.10-10.30 Fiber Spectroscopy for Process-Control in 0.2-16µm Range, Viacheslav Artyushenko, art photonics GmbH 10.30-10.50 Unique Topographic and Tomographic Line Scan Camera enables new measurements in process control, Sauli Törmälä, FocalSpec 10.50-11.20 Coffee break, demonstrators and posters
29/10/2013 7 Thursday October 31 Plenary and closing words 11.20-11.50 Sensor technologies and applications in Murata, Anssi Korhonen, Murata Electronics 11.50-12.20 Silicon subtrate technologies for MEMS, Markku Tilli, Okmetic 12.20-12.30 Closing words, Petri Kalliokoski, VTT 12.30-13.30 Lunch, demonstrators and posters
29/10/2013 8 VTT creates business from technology