TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY Tender Notice Sealed tenders are required for the purchase of following Machinery and Consumable material for manufacturing of Brass and Copper Handicrafts at service centre, GCT GC & PD, Shahdara from GST & Income Tax Paying/ Registered firms; The detailed list of items alongwith technical specifications is available in tender inquiry document which may be obtained at the cost of Rs. 500/- (for each category) from the Lahore office of undersigned during office working hours. Bids will be received upto 12:00 Noon on May 24, 2012 and will be opened on the same day at 01:00 PM. Separate sealed bid forms of each category should be attached with 2 % call deposit of the bid money in favour of Project Manager, Govt. College of Technology for Glass, Ceramics and Pottery Development (TEVTA), Shahdara. The envelope of sealed bid will be marked with the each tender code on the right corner. The purchase committee has right to accept or reject any one or all the bids to accept or reject any one or all the bids without assigning reasons and also may increase or decrease the quantity of each item at any time. The decision of the committee will be final and could not be challenged. Note: - Add and complete information may be downloaded from TEVTA and PPRA websites. Project Manager C/O 29-L Eastern Side, Near Kalma Chowk/Askari-5, Gulberg III, Lahore. Phone# 042 35969500, Cell # 0331 4802242 Email: manager.sc@tevta.gop.pk Web. www.tevta.gop.pk Page 1 of 10
Tender# B&C/01 List of Equipment/Tools Sr. No. Item Description Qty. Origin Specifications 1 Vice 5 Nos. 4", with the fixture to be mounted on wooden work table 2 Steel Rule 25 Nos. 12" Mettalic in plastic casing, Measuring tapes 5 Nos. 3 15' 4 Try square 10 Nos. 5 Vernier caliper 10 Nos. 10"- 12" 6 7 File (Reti) Different types File (Small / In different shapes) 6 sets Indonesia/Malaysia Rough, Polish (Half Round, Square), Size: 10" - 12" Size: 6" 8 Tongs 3 Nos. with 2'-6" Arm 9 Pattern Simple vase 1 Set 6", Type: Saru 10 Pattern Simple vase 1 Set 8", Type: Saru 11 Pattern Simple vase 1 Set 10", Type: Saru 12 Pattern Simple vase 1 Set 12", Type: Saru 13 Pattern Simple vase 1 Set 16", Type: Saru 14 Pattern Simple vase 1 Set 12", Type: Kashmiri 15 Pattern Simple vase 1 Set 14", Type: Kashmiri 16 Pattern Simple vase 1 Set 16", Type: Kashmiri 17 Pattern Simple vase 1 Set 10", Type: Jar 18 Pattern Simple vase 1 Set 12", Type: Jar 19 Ptterns of different animals 1 set each 20 Tongs 20 Size: 10" 21 Tongs 20 Size: 12" 22 Tongs 20 Size: 15" 23 Steel Rod 20 Ft. Dia: 3/4" Elephant, Horse, Duck, Camel, Dove, Size 8", 10", 15" for all animals Page 2 of 10
24 Steel Rod 20 Ft Dia: 1/2" 25 Steel plates 4 Nos. 8" x 8" x 3/4" Round shape in different Reza / moulds 26 sizes Irregular and square shape Reza / moulds 27 in different sizes 2 Kg, 1 Kg, 1/2 Kg, 300 gm, Hammers (Different types) 6 Nos. 28 200 gm 29 Blower fans 4 Nos. Nozzle size for Air Outlet: 2", Single Phase, 3/4 HP 30 Iron Weight 4 Nos. 7" x 7" x 1 1/2" 31 Haven Dasta 2 set 6 "- 8", Dasta Size: 1' 32 Grinding machines 2 units 1 HP, 3 Phase, With shaft for attaching wheels on both sides 33 Grinding wheels 5 Nos. Dia: 8", 1" Thick 34 Grinding wheels 5 Nos. Dia: 6", 1" Thick 35 Grinding wheels 5 Nos. Dia: 8", 1/2" Thick 36 Grinding wheels 5 Nos. Dia: 6", 1/2" Thick 37 Grinding disk cutter 25 Nos. Dia: 9", 1/8" Thick 38 Grinding disk cutter 25 Nos. Dia: 9", 1/16" Thick 3 HP / 3 Phase, Double side Polish / Buffing machine 2 units 39 for buffing Action 40 Leather saan 30 Nos. Dia: 8", 1/2" Thick 41 Leather saan 30 Nos. Dia: 8", 1" Thick 42 Leather saan 30 Nos. Dia: 8", 1 1/2" Thick 43 Leather saan 30 Nos. Dia: 4", 1" Thick 44 Leather saan 30 Nos. Dia: 6", 1" Thick 45 Buff 10 Nos. Cloth made, 6"Ø / 60 P 46 Buff 10 Nos. Cloth made, 8"Ø / 60 P 47 Buff 10 Nos. Cloth made, 8"Ø / 80 P 48 Buff 10 Nos. Cloth made, 8"Ø / 100 P 49 Buff 10 Nos. Cloth made, 12"Ø / 60 P 50 Buff 10 Nos. Cloth made, 12"Ø / 80 P 51 Buff 10 Nos. Cloth made, 12"Ø / 100 P 52 Buff 10 Nos. Half warmish, 6"Ø / 60 P 53 Buff 10 Nos. Half warmish, 8"Ø / 60 P 54 Buff 10 Nos. Half warmish, 8"Ø / 80 P Page 3 of 10
55 Buff 10 Nos. Half warmish, 8"Ø / 100 P 56 Buff 10 Nos. Half warmish, 12"Ø / 60 P 57 Buff 10 Nos. Half warmish, 12"Ø / 80 P 58 Buff 10 Nos. Half warmish, 12"Ø / 100 P 59 Manual lathe machine 2 units Especially designed for Handicrafts, 3 HP / 3 Phase 60 Hand made randa 15 Nos. 61 Steel rod 10 Ft 3/4" 62 Wooden pieces 10 Nos. 8"Ø x 4" 63 Wooden pieces 10 Nos. 6"Ø x 4" 64 Wooden pieces 10 Nos. 4"Ø x 4" 65 Wooden pieces 10 Nos. 2"Ø x 4" With Stand, 1/2 HP, Single Drill machine 2 Nos. 66 Japan Phase 67 Hand drill machine 2 Nos. Japan 1/2 HP 68 Hand grinder 2 Nos. Japan 69 O2 Cylinder 4 Nos. 70 O2 Pressure gauges 4 Nos. 71 LPG cylinder 4 Nos. 72 LPG cylinder regulator 4 Nos. 73 Pressure rubber hose 50 Ft Dia: 1/2 Inch 74 Spark lighters 3 Nos. 75 76 Work table for gas welding Water tank for Electroplating 2 Nos. 2 Nos. Page 4 of 10 Area: 18 Sq. Inch, Height: 1 ft. 6' x 3' x 3' 77 Rectrifier for electroplating 2 Nos. AC / DC 78 79 Engraving work tables Stone pieces for tool sharpening 5 Nos. 2 Nos. 80 Lathe machine 1 unit 3 ft. 81 Lathe machine 1 unit 5 ft. 82 Dog chuck 1 Nos. 8"Ø 83 Dog chuck 1 Nos. 12"Ø 84 Through chuck 1 Nos. 4"Ø 85 Through chuck 1 Nos. 6"Ø 86 Through Chuck 1 Nos. 8"Ø Wooden, Size: 1 1/2', 1', 1 1/2' Height
87 Drill Chuck 3 Nos. 3/4" 88 Drill chuck 3 Nos. 1/2" 89 Bearing center 2 Nos. 3/4 HP-1 Phase, With work Grinding machines 2 units 90 stand 3/4 HP-1 Phase, Without Grinding machines 2 units Work Stand, Table 91 Thickness: 1 1/2", Height: 3' 92 Wooden work tables 5 Nos. 3' x 5' 93 Steel bowls 10 Nos. Different types and sizes Hand made engraving tools 200 Nos. 94 (Kalam) 95 Color spraying machine with all accessories 1 Unit Note: The relevant literature, Broucher/Catalogue, Drawing etc. of the quoted items be attached (it any). Page 5 of 10
Tender# B&C/02 List of Consumable Material Sr. No. Item Description Qty. Origin Specifications 1 Brass Scrap 1,000 Kg Type: Purza 2 Zinc Scrap 200 Kg 3 Aluminum Scrap 50 Kg 4 Lead Scrap 200 Kg 5 Coal 500 Kg For Furnace 6 Sajji 100 Kg 7 Suhaga 50 Kg 8 9 10 Brass / Copper Sheets Brass / Copper Sheets Brass / Copper Sheets 11 Raal 200 Kg Page 6 of 10 2' x 4' / 22 gauge, 1 Number, 1 1/2 Number 2' x 4' / 24 gauge, 1 Number, 1 1/2 Number 2' x 4' / 26 gauge, 1 Number, 1 1/2 Number 12 Uramchi powder 3 Bags Chalk Mitti 1/16", 1/8", 5/32", 3/16", Drill bits 10 each 13 7/32", 1/4" 9/32", 5/16", 11/32", 3/8" Drill bits 5 each, 7/16", 1/2", 9/16", 5/8", 14 3/4" 15 Kuthali # 4 16 Kuthali # 5 17 Fire bricks 100 Nos. 18 Fire clay 2 bags Powder type 19 Fire clay 2 bags Dana type 10 Ply wood sheets 20 sheets Lassani Wood (1/2") 21 Casting sand 10 bags 22 High carbon stell bar for tip tools 15 ft
23 Tips (HSS) 1/2" x 1/2" x 1/8" (HSS) 3/4" x 3/4" x Tips 24 1/8" 25 Grinding wheels for tool grinding 2 Nos. Dia: 8", Thickness: 1" 26 Nickel plates 4 Kg 27 Black nickel salt 25 Kg 28 Albus nickel salt 25 Kg 29 Nickel sulphate 20 Kg Electroplating brighter (Different 6 Bottles 30 types) 31 Colors for spraying (Different types) 6 Gallons 32 33 Sand paper(water proof, hard) Adhesive solution 300 meter # 60 75 Packs Elephant brand / 1Kg packing 34 Saresh 20 Kg Dana type 35 Ambry 50 Kg # 120 36 Ambry polish 10 Kg 37 White masala bar 500 Nos. 38 Luster bar 20 Nos. 39 Steel Rite bar 10 Nos. Blue 40 Steel Rite bar 10 Nos. Pink As Liquid deco colors 41 required As Liquid Laquer 42 required As Thinner for liquid colors 43 required Note: The relevant literature, Broucher/Catalogue, Drawing etc. of the quoted items be attached (it any). Page 7 of 10
TENDER NOTICE (B&C 01, B&C 02) Terms and Conditions Project Manager Service Centre at GCT GC & PD, Shahdara invites sealed tenders for the procurement of items described in attached list from the Income Tax & Sales Tax Registered reputable firms at following terms and conditions: - A party may apply for any number of tender out of these three tenders. Tender documents for each category with terms & conditions will be available from this office at the cost of Rs.500/- (non-refundable). The bidder should be holders of Sale Tax Registration No. and N.T.N. Both certificates must be attached with the tender documents. The bidder must provide photocopy of CNIC and contact number of the incharge or authorized representative of the organization. Taxes will be deducted as per Government rules. 2% call deposit (Refundable) in the name of Project Manager, Govt. College of Technology for Glass, Ceramics and Pottery Development (TEVTA), Shahdara of the total tender amount should be enclosed; otherwise the tender will not be accepted / considered for bidding. It will be in the form of Call Deposit Receipt issued by any scheduled bank. 2 % call deposit of the unsuccessful bidders will be retuned on written request. The rates will be valid upto 90 days from opening date of bid. The rates should be quoted by including all taxes, cost of loading, unloading and transportation charges at site. Safe delivery to the site will be responsibility of the bidder. For local manufactured items, any one of drawings or photos must be provided with the tender documents. But drawings must be provided with the final delivery. For all other items, broachers or other supporting documents must be provided where applicable. Page 8 of 10
The successful bidder for the Tender B&C/ 01 will provide performance security/ retention money @ Rs.10% of the total value of supplied items, and retained for 08-months. The bidder will be bound for supplying the items as per order / specification within the stipulated time agreed mutually by the parties, in case the call deposit amount will be forfeited. In case, the offer is withdrawn, amended or revised, earnest money will be forfeited. Invoice bearing the amount of sale tax should be submitted in local currency i.e Pak Rupee. The competent officer / authority can reject any item, tender, or all tenders without assigning any reason thereof. The payment of bill will be made after the inspection of purchase committee and items found as per specification. No conditional tender will be entertained. The tenders from the parties which are black listed/suspended will not be entertained. Avoid any cutting/erasing/crossing/overwriting in the tender document. The tenderer shall submit the original tender document and all pages duly signed and stamped complete in all respect and keep a copy of the signed tender for his own record. Any dispute that may arise shall be settled in accordance with rules and regulations of the Government of Punjab. Further PPRA rules shall be applicable and observed in letter and spirit. Sealed Tender should reach this office till 24th May 2012 before 12:00 Noon (for all categories) and the tender will be opened on the same day at 01:00 PM (for all categories) in the presence of bidders or their authorized representatives. Project Manager Govt. College of Technology for Glass, Ceramics and Pottery Development, Shahdara Page 9 of 10
Checklist of documents to be submitted with the Bid 1- Original filled Bid document 2- Drawing/Photos etc. where applicable 3- Boucher etc of the machines/ equipments where applicable 4- Guarantee card where applicable 5- Copy of certificate of registration of GST with FBR, Income Tax etc. 6- Copy of NTN certificate 7- CDR amounting 2 % of the bid value as earnest money in favour of TEVTA, GCT GC & PD, Shahdara Page 10 of 10