9. Changeable Fixture 1. Mechanical Fixture Serie 1200 2. Mechanical Fixture Serie 1400 3. Mechanical Fixture Serie 1500 4. Mechanical Fixture Serie 1600 5. Pneumatical Fixture Serie 3000 6. HF Pneumatic Fixture Serie 4000 7. Mech. Changeable Fixture Serie 5000 8. Vacuum Changeable Fixture Serie 500 9. Storage Box 1500 3000
Mechanical Fixture WA-M-12xx Technical despription small changeable fixture with parallel mechanical pressure unit it can be opened during the debugging (1250/1251) interface with 192 contacts (1250/1251) lower-cost because of the changeable unit individual upgrading through the unit assembly system customer specified interface fixture is suitable for about 300N (200 probes with 1,5N spring force) changeable plates / raise of case are not included in the fixture; order separately optional locking device with magnet Fixture: Outside Working area: Probe plate: Moving plate: Holddown dimensions: plate: Holddown element: WA-M-1200 250x190x190mm 160x100mm WA-KTP-100 WA-PAP-100 WA-AP-100 WA-AE-100 WA-M-1250 490x330x220mm 320x100mm WA-KTP-1250 WA-PAP-1250 WA-AP-1250 WA-AE-1250 WA-M-1251 490x330x220mm 160x100mm WA-KTP-100 WA-PAP-100 WA-AP-100 WA-AE-100 WA-M-1251-T 490x330x220mm 2x 160x100mm 2x WA-KTP-100 2x WA-PAP-100 2x WA-AP-100 2x WA-AE-100 updated: Dec. 2011 Subject to technical modifications Seite 1
Mechanical Fixture Small fixture with parallel closing pressure unit max. working area: 160x100mm, outside dimensions: 250x190x190mm WA-M-1200 Small fixture with parallel closing pressure unit max. working area: 320x100mm, outside dimensions: 490x330x220mm WA-M-1250 Small fixture with parallel closing pressure unit max. working area: 160x100mm, outside dimensions: 490x330x220mm WA-M-1251 Small fixture with parallel closing pressure unit max. working area: 2x 160x100mm, outside dimensions: 490x330x220mm WA-M-1251-T Probe plate interface for 2 Sub-D-connectors (9 to 25pole) (not included) max. working area: 160x100mm, outside dimensions: 190x130mm, approx. 10mm thick WA-KTP-100 updated: Dec. 2011 Subject to technical modifications Seite 2
Mechanical Fixture Probe plate interface for 2 Sub-D-connectors (9 to 25pole) (not included) max. working area: 320x100mm, outside dimensions: 380x130mm, approx. 10mm thick WA-KTP-1250 Moving plate made of EGS-AS; spring-probes for UUT, with 8 distance stoppers (3mm) max. working area: 160x100mm; outside dimensions: 190x110mm, approx. 5mm thick WA-PAP-100 Moving plate made of EGS-AS; spring-probes for UUT, with 8 distance stoppers (3mm) max. working area: 320x100mm; outside dimensions: 380x110mm, approx. 5mm thick WA-PAP-1250 Holddown plate made of ESD acrylic plastic, approx. 10mm thick; inkl. screws, max. working area : 160x100mm, outside dimensions: 190x110mm WA-AP-100 Holddown plate made of ESD acrylic plastic, approx. 10mm thick; inkl. screws, max. working area : 320x100mm, outside dimensions: 380x110mm WA-AP-1250 updated: Dec. 2011 Subject to technical modifications Seite 3
Mechanical Fixture Holddown element crosshead with 4 heigh-adjustable pushdown fingers, mounting material incl. WA-AE-100 Holddown element crosshead with 4 heigh-adjustable pushdown fingers, mounting material incl. WA-AE-1250 Tooling Pins (Set) 2 Pins for holddown plate and moving plate; (use only for probing on the top side) WA-FB-70 Spring probes for UUT 3N sockets incl., spring force 3N; extended height: 13,3mm point style: 4mm WA-GPA-13-3N Spring probes for UUT 6N sockets incl., spring force 6N; extended height 13,3mm poing style: 4mm WA-GPA-13-6N updated: Dec. 2011 Subject to technical modifications Seite 4
Mechanical Fixture Spring probes for UUT 3N sockets incl., spring force 3N; extended height 13,3mm point style: 3mm (plastic) WA-GPA-13-3N-K Spring probes for UUT 6N sockets incl., spring force 6N; extended height 13,3mm point style: 3mm (plastic) WA-GPA-13-6N-K Locking device with holding magnet (24 V DC) WA-M-1200-VM updated: Dec. 2011 Subject to technical modifications Seite 5
Mechanical Fixtures WA-M-1400 Fixture specification - - mechanical changeable fixture with pressure unit - - Outside dimensions: 530 x 430 200mm - - Max. working area: 350 x 230 mm - - Lower-cost through the changeable unit - - Individuell completion through the unit assembly system - - Fast change of the probe plate and the pushdown plate - - Self-closing interface through the connectors - - deskform for easy handling - - Customer specified interface - - Case can be opened during the debugging - - Probe plate and pushdown plate are not included - - Various accessoires Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Accessoires for WA-M-1400 Tech. Beschreibung: Kontaktträgerplatte Kontaktträger-Platte Probe plate inkl. 192 pole interner internal 192 poliger interface incl. Schnittstelle. Outside dimensions: Außenmaß: 400 x 270 mm 400 x 270 mm Nutzfläche: Working area: 350 350 x 230 x 230 mm mm Tech. Beschreibung: Andruckplatte Holddown plate aus made ESD of - ESD Plexiglas acrylic plastic ( 15 mm) (15 mm) Außenmaß: Outside dimensions: 407 x 240 mm 407 x 240 mm Mechanical Fixtures Bestell Nummer: WA-KTP-400 Bestell Nummer: WA-AP-400 Tech. Beschreibung: Andruckelement, Holddown, Traverse mit Traverse crosshead drei höhenverstellbaren mit with drei 3 höhenverstellbaren adjustable pushdown Niederhaltern fingers, inkl.befestigungsmaterial mounting incl. Länge Lenght: 408 height Niederhaltern mm Tech. Beschreibung: Hülsenschutzplatte Prüflingsauflageplatte Protecting plate for sockets, for für inkl. WA-KTP-400 6 gefederter Auflagen, Distanzstoppern ( 3mm ) Nutzfläche: 350 x 230 mm Bestell Nummer: WA-AE-400 Bestell Nummer: WA-HSP-400 Tech. Beschreibung: Gefederte Hülsenschutzplatte Raise of case Prüflingsauflage mit für Height: WA-KTP-400 3N inkl. 90 mm Montage-Hülse Höhe ausgefedert 13,3 mm Kopf-Drm. 4mm Nickel Tech. Beschreibung: Gefederte Schnittstellenerweiterung Spring probes Prüflingsauflage for UUT mit seating, 4 x 3N 96 inkl. pol. sockets für Montage-Hülse incl., Höhe Kontaktträgerplatte spring ausgefedert force 3N 13,3 Expanded mm WA-KTP-400 height: 13,3 mm Kopf-Drm. Point style: 3mm 4 mm Kunststoff (nickel) Bestell Nummer: MFG-530-raise of case Bestell Nummer: WA-GPA-13-3N Tech. Beschreibung: Gehäuseerhöhung Schnittstellenerweiterung Spring probes for UUT Höhe 4 seating, x 9690 pol. sockets mm incl., für spring Grundgerät force 3N WA-M-1500 Expanded height: 13,3mm Point style: OD 3 mm (plastic) Bestell Nummer: WA-GPA-13-3N-K Bestell Nummer: Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Accessoires for WA-M-1400 Tech. Beschreibung: Kontaktträgerplatte Kontaktträger-Platte Probe plate inkl. 192 pole interner internal 192 poliger interface incl. Schnittstelle. Outside dimensions: Außenmaß: 400 x 270 mm 400 x 270 mm Nutzfläche: Working area: 350 350 x 230 x 230 mm mm Tech. Beschreibung: Andruckplatte Holddown plate aus made ESD of - ESD Plexiglas acrylic plastic ( 15 mm) (15 mm) Außenmaß: Outside dimensions: 407 x 240 mm 407 x 240 mm Mechanical Fixtures Bestell Nummer: WA-KTP-400 Bestell Nummer: WA-AP-400 Tech. Beschreibung: Andruckelement, Holddown, Traverse mit Traverse crosshead drei höhenverstellbaren mit with drei 3 höhenverstellbaren adjustable pushdown Niederhaltern fingers, inkl.befestigungsmaterial mounting incl. Länge Lenght: 408 height Niederhaltern mm Tech. Beschreibung: Hülsenschutzplatte Prüflingsauflageplatte Protecting plate for sockets, for für inkl. WA-KTP-400 6 gefederter Auflagen, Distanzstoppern ( 3mm ) Nutzfläche: 350 x 230 mm Bestell Nummer: WA-AE-400 Bestell Nummer: WA-HSP-400 Tech. Beschreibung: Gefederte Hülsenschutzplatte Raise of case Prüflingsauflage mit für Height: WA-KTP-400 3N inkl. 90 mm Montage-Hülse Höhe ausgefedert 13,3 mm Kopf-Drm. 4mm Nickel Tech. Beschreibung: Gefederte Schnittstellenerweiterung Spring probes Prüflingsauflage for UUT mit seating, 4 x 3N 96 inkl. pol. sockets für Montage-Hülse incl., Höhe Kontaktträgerplatte spring ausgefedert force 3N 13,3 Expanded mm WA-KTP-400 height: 13,3 mm Kopf-Drm. Point style: 3mm 4 mm Kunststoff (nickel) Bestell Nummer: MFG-530-raise of case Bestell Nummer: WA-GPA-13-3N Tech. Beschreibung: Gehäuseerhöhung Schnittstellenerweiterung Spring probes for UUT Höhe 4 seating, x 9690 pol. sockets mm incl., für spring Grundgerät force 3N WA-M-1500 Expanded height: 13,3mm Point style: OD 3 mm (plastic) Bestell Nummer: WA-GPA-13-3N-K Bestell Nummer: Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Mechanical Fixtures WA-M-1401 Fixture specification - Outside dimensions : 280 x 430 x 200 mm - Max. working area : 220 x 115 mm - deskform for easy handling - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through the connectors - Costumer specified interface - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Mechanical Fixtures Accessories for WA-M-1401 Changeable probe plate, 96 pole internal interface incl. Outside dimensions: 270 x 140 mm SWpecification: Holddown plate made of ESD acrylic plastic (10mm) Outside dimensions: Working area: 220x110 mm 230 x 160 mm WA-KTP-140 WA-AP-140 Holddown element, crosshead with 3 height-adjustable pushdown fingers, mounting material incl. Raise of casefor WA-M-1401 Height: 45 mm Length: 160 mm WA-AE-140 MFG-280-Raise of case Spring probes for UUT seating, socket incl. Expanded height: 13,3 mm WA-GPA-13-3N Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Mechanical Fixtures WA-M-1401 Fixture specification - Outside dimensions : 280 x 430 x 200 mm - Max. working area : 220 x 115 mm - deskform for easy handling - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through the connectors - Costumer specified interface - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Mechanical Fixtures Accessories for WA-M-1401 Changeable probe plate, 96 pole internal interface incl. Outside dimensions: 270 x 140 mm SWpecification: Holddown plate made of ESD acrylic plastic (10mm) Outside dimensions: Working area: 220x110 mm 230 x 160 mm WA-KTP-140 WA-AP-140 Holddown element, crosshead with 3 height-adjustable pushdown fingers, mounting material incl. Raise of casefor WA-M-1401 Height: 45 mm Length: 160 mm WA-AE-140 MFG-280-Raise of case Spring probes for UUT seating, socket incl. Expanded height: 13,3 mm WA-GPA-13-3N Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Mechanical Fixture WA-M-15xx Technical despription parallel mechanical pressure unit lower-cost because of the changeable unit individual upgrading through the unit assembly system interface with contacts or probe-interface fixture is suitable for about 300N (200 probes with 1,5N spring force) customer specified interface case can be opened during the debugging changeable plates / raise of case are not included in the fixture; order separately various accessoires Fixture: Outside Working area: Probe plate: Moving plate: Holddown dimensions: plate: Holddown element: WA-M-1500 530x450x240mm 350x230mm WA-KTP-400 WA-PAP-400 WA-AP-400 WA-AE-400 WA-M-1500-I 530x450x240mm 330x180mm WA-KTP-400-I WA-PAP-400-I WA-AP-400 WA-AE-400 WA-M-1501 280x450x240mm 205x110mm WA-KTP-140 WA-PAP-140 WA-AP-140 WA-AE-140 WA-M-1501-I 280x450x240mm 180x110mm WA-KTP-140-I WA-PAP-140-I WA-AP-140 WA-AE-140 WA-M-1501-I-T 560x450x240mm 2x 180x110mm 2x WA-KTP-140-I 2x WA-PAP-140-I 2x WA-AP-140 2x WA-AE-140 WA-M-1501-T 560x450x240mm 2x 205x110mm 2x WA-KTP-140 2x WA-PAP-140 2x WA-AP-140 2x WA-AE-140 WA-M-1510 740x510x250mm 520x295mm WA-KTP-410 WA-PAP-410 WA-AP-410 WA-AE-410 WA-M-1510-I 740x510x250mm 520x250mm WA-KTP-410-I WA-PAP-410-I WA-AP-410 WA-AE-410 WA-M-1511-I-T 740x510x250mm 2x 260x160mm 2x WA-KTP-210-I 2x WA-PAP-210-I 2x WA-AP-210 2x WA-AE-210 WA-M-1511-T 740x510x250mm 2x 295x180mm 2x WA-KTP-210 2x WA-PAP-210 2x WA-AP-210 2x WA-AE-210 updated: Dec. 2011 Subject to technical modifications Seite 1
Mechanical Fixture Fixture with parallel closing pressure unit incl. 192pole internal interface max. working area: 350x230 mm WA-M-1500 Fixture with parallel closing pressure unit for FKS-IF incl. mounting support for internal interface with max. 1020Pins max. working area: 330x180mm WA-M-1500-I Fixture with parallel closing pressure unit incl. 96 pole internal interface max. working area: 205x110 mm WA-M-1501 Fixture with parallel closing pressure unit for FKS-IF incl. mounting support for internal interface with max. 510Pins max. working area: 180x110 mm WA-M-1501-I Mechanical Tandem Fixture for FKS-IF with two separate parallel mechanical pressure units WA-M-1501 max. working area: 2x 180x110mm; incl. mounting supports for int. Interface with max. 510Pins WA-M-1501-I-T updated: Dec. 2011 Subject to technical modifications Seite 2
Mechanical Fixture Mechanical Tandem Fixture with two separate parallel mechanical pressure units WA-M-1501 max. working area: 2x 205x110mm; incl. 96 pole internal interface WA-M-1501-T Fixture with parallel closing pressure unit incl. 4x96pole internal interface max. working area: 520x295 mm outside dimensions: 740x510x250mm WA-M-1510 Fixture with parallel closing pressure unit for FKS-IF incl. mounting support for internal interface with 1020Pins, expandable to max. 2040Pins max. working area: 520x250mm; outside dimensions: 740x510x250mm WA-M-1510-I Mechanical Tandem Fixture for FKS-IF with two separate parallel mechanical pressure units WA-M-1511, outside dimensions: 740x510x250mm max. working area: 2x 260x160mm; incl. mounting supports for int. Interface with max. 512Pins WA-M-1511-I-T Mechanical Tandem Fixture with two separate parallel mechanical pressure units WA-M-1511 outside dimensions: 740x510x250mm; max. working area: 2x 295x180mm; incl. 96 pole internal interface WA-M-1511-T updated: Dec. 2011 Subject to technical modifications Seite 3
Mechanical Fixture Probe plate CEM1; incl. 192pole internal interface max. working area: 350x230mm, outside dimensions: 400x270mm, approx. 10mm thick WA-KTP-400 Probe plate for FKS-IF incl. mounting support for internal interface with max. 1020Pins max. working area: 330x180mm WA-KTP-400-I Probe plate incl. 96pole internal interface max. working area: 205x110mm WA-KTP-140 Probe plate for FKS-IF incl. mounting support for internal interface with max. 510Pins max. working area: 180x110 mm WA-KTP-140-I Probe plate CEM1; incl. 4x96pole internal interface max. working area. 520x295mm outside dimensions: 570x335mm, approx. 10mm thick WA-KTP-410 updated: Dec. 2011 Subject to technical modifications Seite 4
Mechanical Fixture Probe plate for FKS-IF for WA-M-1510-I / WA-P-3010-I; incl. mounting support for internal interface with 1020Pins, expandable to 2040Pins max. working area: 520x250mm; outside dimensions: 570x335mm WA-KTP-410-I Probe plate for FKS-IF incl. mounting support for internal interface with 510Pins max. working area: 260x160 mm WA-KTP-210-I Probe plate incl. 96pole internal interface max. working area: 295x180mm; outside dimensions: 336x209mm WA-KTP-210 Moving plate spring-mounted, 6 spring-probes for UUT incl., with distance stoppers (3mm) max. working area: 350x230mm, outside dimensions: 400x254mm, approx. 5mm thick WA-PAP-400 Moving plate made of EGS-AS; incl. 10 distance stoppers (3mm) max. working area: 330x180mm, outside dimensions: 400x270mm, approx. 5mm thick WA-PAP-400-I updated: Dec. 2011 Subject to technical modifications Seite 5
Mechanical Fixture Moving plate made of EGS-AS; 6 spring-probes for UUT incl., with distance stoppers (3mm) max. working area: 205x110 mm; outside dimensions: 270x140mm, approx. 5mm thick WA-PAP-140 Moving plate made of EGS-AS; incl. 10 distance stoppers (3mm) max. working area: 180x110mm, outside dimensions: 270x140mm, approx. 5mm thick WA-PAP-140-I Moving plate approx. 5mm thick, 8 spring-probes for UUT incl. and 15 distance stoppers 02 (3mm), made of EGS-619-AS-COMP Var. 2, max. product area: 520x295mm, outside dimensions: 570x331mm WA-PAP-410 Moving plate for WA-M-1510-I / WA-P-3010-I; made of EGS-AS incl. 10 distance stoppers (3mm) max. working area: 520x250 mm; outside dimensions : 570x335mm; approx. 5mm thick WA-PAP-410-I Moving plate made of EGS-AS; incl. 10 distance stoppers (3mm) and 4 spring probes for UUT max. working area: 260x160 mm; outside dimensions: 336x209mm, approx. 5mm thick WA-PAP-210-I updated: Dec. 2011 Subject to technical modifications Seite 6
Mechanical Fixture Moving plate made of EGS-AS; 6 spring-probes for UUT incl. and 10 distance stoppers (3mm) max. working area: 295x180mm; outside dimensions: 332x209mm, approx. 5mm thick WA-PAP-210 Holddown plate made of ESD acrylic plastic, approx. 15mm thick, outside dimensions : 407x240mm max. working area: 350x230mm; incl. 6pcs pushdown fingers M3x30 PA WA-AP-400 Holddown plate made of ESD acrylic plastic, approx. 10mm thick, max. working area: 205x110mm; outside dimensions: 260x158mm WA-AP-140 Holddown plate made of ESD acrylic plastic, approx. 15mm thick, max. working area: 520x295mm; outside dimensions : 576x330,5mm WA-AP-410 Holddown plate made of ESD-PVC, approx. 10mm thick max. working area: 295x180mm; outside dimensions: 335x227 mm WA-AP-210 updated: Dec. 2011 Subject to technical modifications Seite 7
Mechanical Fixture Holddown element crosshead with 3 heigh-adjustable pushdown fingers, mounting material incl.; length: 408mm WA-AE-400 Holddown element crosshead with 3 heigh-adjustable pushdown fingers, mounting material incl. WA-AE-140 Holddown element crosshead with 5 heigh-adjustable pushdown fingers, mounting material incl.; length 578mm WA-AE-410 Holddown element crosshead with 3 heigh-adjustable pushdown fingers, mounting material incl. WA-AE-210 Protecting plate for WA-KTP-400 approx. 3mm thick, incl. fixing material outside dimensions: 370x250mm WA-HSP-400 updated: Dec. 2011 Subject to technical modifications Seite 8
Mechanical Fixture Protecting plate for WA-KTP-140 acrylic plastic, approx. 3mm thick; incl. fixing material outside dimensions: 239x112mm WA-HSP-140 Protecting plate for WA-KTP-410 approx. 3mm thick, incl. fixing material outside dimensions: 543x316mm WA-HSP-410 Protecting plate for WA-KTP-210 acrylic plastic, approx. 3mm thick; incl. fixing material outside dimensions: 321x182mm WA-HSP-210 Interface expansion 4x96pole Wire-Wrap for WA-KTP-400 upgradeable, incl. fixing material WA-KTP-IF384 Interface-block 170pole with interface pins max. 6 blocks for a WA-KTP-400-I adjustable incl. fixing material WA-KTP-IF170 updated: Dec. 2011 Subject to technical modifications Seite 9
Mechanical Fixture Interface expansion 2x96pol. Wire-Wrap for WA-KTP-140 upgradeable, incl. fixing material WA-KTP-IF192 Interface expansion 4x96pole Wire-Wrap for WA-M-1400/WA-M-1500/WA-P-3000 upgradeable, incl. fixing material WA-M-IF384 Interface-block 170pole with interface probes max. 6 blocks for a WA-M-1500-I adjustable incl. fixing material WA-M/P-IF170 Interface expansion 2x96pol. Wire-Wrap for WA-M-1401/WA-M-1501 upgradeable, incl. fixing material WA-M-IF192 Pneumatic-interface-block 8pole for internal interface on the probe plates WA-KTP-xxx-I incl. fixing material WA-KTP-IF-PBB-8 updated: Dec. 2011 Subject to technical modifications Seite 10
Mechanical Fixture Pneumatic-interface-block 8pole for internal interface in the housing WA-M-1xxx-I or WA-P-3xxx-I incl. fixing material WA-M/P-IF-PSB-8 Interface expansion for WA-M-1510-I for upgrading; mounting below the base plate, for max. 3 blocks (not included); mountable on two mounting positions WA-M-1510-I-203_1 Interfac expansion for WA-KTP-140/400/410-I for upgrading mounting below the probe plate, for max. 3 blocks (not included); mountable on two mounting positions WA-KTP-XX0-I-004 Raise of case 90mm V2.0 for case MFG-530-Pult-Gehäuse-V1.0; aluminium, heigh: 90mm MFG-530-GEHÄUSEERHÖHUNG-90 Raise of case 250mm for case MFG-530-Pult-Gehäuse-V1.0 heigh: 250mm MFG-530-GEHÄUSEERHÖHUNG-250 updated: Dec. 2011 Subject to technical modifications Seite 11
Mechanical Fixture Raise of case 45mm for case MFG-280-PULT-GEHÄUSE-V1.0 (for WA-M-1401/1501; PA3001) MFG-280-GEHÄUSEERHÖHUNG Raise of case 90mm V1.0 for case MFG-700-Pult-V1.0; aluminium RAL7035 MFG-700-GEHÄUSEERHÖHUNG-90 Start button, magnetic for WA-M-15xx deskform with parallel holddown mechanic-system WA-M-1500-MS Spring probes for UUT 3N sockets incl., spring force 3N; extended height: 13,3mm point style: 4mm WA-GPA-13-3N Spring probes for UUT 6N sockets incl., spring force 6N; extended height 13,3mm poing style: 4mm WA-GPA-13-6N updated: Dec. 2011 Subject to technical modifications Seite 12
Mechanical Fixture Spring probes for UUT 3N sockets incl., spring force 3N; extended height 13,3mm point style: 3mm (plastic) WA-GPA-13-3N-K Spring probes for UUT 6N sockets incl., spring force 6N; extended height 13,3mm point style: 3mm (plastic) WA-GPA-13-6N-K updated: Dec. 2011 Subject to technical modifications Seite 13
WA-M-16xx Mechanical Fixture Technical despription parallel mechanical pressure unit interface with 384 contacts or probe-interface lower-cost because of the changeable unit individual upgrading through the unit assembly system customer specified interface fixture is suitable for about 1000N (1000 probes with 1N spring force) case can be opened during the debugging changeable plates / raise of case are not included in the fixture; order separately various accessoires Fixture: Outside dimensions: Working area: Probe plate: Moving plate: Holddown plate: WA-M-1600 530x270x450mm 350x230mm WA-KTP-1600 WA-PAP-1600 WA-AP-1600 WA-M-1600-I 530x270x450mm 350x215mm WA-KTP-1600-I WA-PAP-1600 WA-AP-1600 updated: Dec. 2011 Subject to technical modifications Seite 1
Mechanical Fixture Fixture with parallel closing pressure unit without changeable plates, incl. 384pole internal interface (expandable), max. working area: 350x230mm; outside dimensions: 530x270x450mm WA-M-1600 Fixture with parallel closing pressure unit without changeable plates, incl. mounting support for internal interface with max. 1700Pins, usable interface-blocks: TSI-50-USB-A-Receiver / TSI-50-16A-45-FKS TSI-50-201 / TSI-50-PSB max. working area: 350x215mm; outside dimensions: 530x270x450mm WA-M-1600-I Probe plate CEM1; incl. 384pole internal interface (expandable) max. working area: 350x230mm; outside dimensions: 440x320mm WA-KTP-1600 Probe plate for FKS-IF CEM1; incl. mounting support for internal interface with max. 1700Pins, usable interface-blocks: TSI-50-USB-A-Adapter / TSI-50-16A-45-IK TSI-50-101 / TSI-50-PBB max. working area: 350x215mm; outside dimensions: 440x320mm WA-KTP-1600-I Moving plate made of EGS-AS with 8 distance stoppers (3mm) outside dimensions: 440x320mm, ca. 5mm stark WA-PAP-1600 updated: Dec. 2011 Subject to technical modifications Seite 2
Mechanical Fixture Holddown plate made of ESD acrylic plastic, approx. 15mm thick outside dimensions: 445x310mm WA-AP-1600 Raise of case 90mm V2.0 for case MFG-530-Pult-Gehäuse-V1.0; aluminium, heigh: 90mm MFG-530-GEHÄUSEERHÖHUNG-90 Raise of case 250mm for case MFG-530-Pult-Gehäuse-V1.0 heigh: 250mm MFG-530-GEHÄUSEERHÖHUNG-250 updated: Dec. 2011 Subject to technical modifications Seite 3
Pneumatical Fixtures WA-P-3000 Fixture specification - Pneumatical changeable unit with mechanical pressure unit - deskform for easy handling - No effort because of the dual pneumatical drivesystem (24V) - Parallel mechanical pressure unit - Outside dimensions: 530 x 450 x 240 mm - Max. UUT size : 350 x 230 mm - Internal interface 192 pole standard - Extandable to 384 contacts - Signal for the start by pushing down the pressure unit - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through the connectors - Costumer specified interface - Thought out security conception - Check of the contacting position (optional) - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Accessories for WA-P-3000 Pneumatical Fixtures Changeable probe plate, 192 pole internal interface included Outside dimensions: 400 x 270 mm Working area: 350 x 230 mm Holddown plate made of ESD acrylic plastic ( 15 mm) Outside dimensions: 407 x 240 mm WA-KTP-400 WA-AP-400 Changeable moving plate, spring-mounted, 6 springmounted frames incl., with distance stoppers (3 mm) Working area: 350 x 230 mm Protecting plate for sockets for WA-KTP-400 WA-PAP-400 WA-HSP-400 Raise of case for WA-M-1500 Height: 90 mm Interface expansion 4 x 96 pole for changeable probe plate WA-KTP-1400/1500 MFG-530-GE-90-V2 Outside dimensions: 530 x 450 x 240 mm WA-KTP-IF384 Interface expansion 4 x 96 pole changeable fixtures WA-M-1400/1500 Spring probes for UUT seating,sockets incl. Spring force 3N, Expanded height: 13,3 mm, Point style: OD 3 mm, (plastic) WA-M-IF-384 WA-GPA-13-3N-K Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Pneumatical Fixtures WA-P-3000-I Fixture specification - Pneumatical changeable unit with mechanical pressure unit - Outside dimensions: 530 x 450 x 240 mm - Max. working area: 330 x 180 mm - Lower-cost through thechangeable unit - Individual completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Internal interface holding for max. 6 interface blocks, porbes incl. - deskform for easy handling - No effort because of the dual pneumatical drivesystem (24V) - Customer specified interface - Case can be opened during the debugging - Probe plate and pushdown plate are not included - Various accessoriesgroße Auswahl an Zubehör - Thought out security system - Check of the contacting position (optional) Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Pneumatical Fixtures Accessories for WA-P-3000-I Deskform with parallel holddown mechanical-system, without changeable probe plates Outside dimensions: 530 x 450 x 240 mm Raise of case Height: 90 mm with opening in the back, cover incl. Working area: 330 x 180 mm WA-P-3000-I MFG-530-GE-90-V2 Interface block, 170 pole, with pins, max. 6 pieces in a WA-P-3000-I adjustable, mounting material incl. End position switch, 24V signal at Pin 7 closed cover (test position) WA-M/P-IF-170 WA-P-3000-SG Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Accessories for WA-P-3000-I Pneumatical Fixtures Changeable probe plate with protecting plate for sockets, Outside dimensions: 400 x 270 mm Working area: 330 x 180mm Techn. Beschreibung: Andruckplatte Holddown plate aus made ESD - of ESD Plexiglas acrylic plastic (10 mm) (15 mm) Außenmaße: Working area: 160407 x 230 x 240 mm mm WA-KTP-400-I Order Bestellnummer: number: WA-AP-400 Changeable moving plate (3N), spring mount Outseide dimensions: 400 x 270 mm Working area: 330 x 180 mm Interface block, 170 pole, with interface pins, max. 6 Stück in a WA-KTP-400-I adjustable, mounting material incl. WA-PAP-400-I WA-KTP-IF-170 Spring probes for UUT seating, sockets incl., spring force(3n) Expanded heightt: 13,3mm Point style: 3 mm (plastic)) Spring probes for UUT seating, sockets incl., spring force (3N), Expanded height: 13,3 mm Point style.: 4 mm (nickel) WA-GPA-13-3N-K WA-GPA-13-3N Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Pneumatical Fixtures WA-P-3001 Fixture specification - Pneumatical changeable unit with mechanical pressure unit - deskform for easy handling - No effort because of the dual pneumatical drivesystem ( 24V ) - Parallel mechanical pressure unit - Outside dimensions: 450 x 280 x 240 mm - Max. UUT size : 220 x 115 mm - Signal for the start by pushing down the pressure unit - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through connectors 96 pole - Costumer specified interface - Thought out security conception - Check of the contacting position (optional) - Case can be opened during the debugging - Various accessories - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Pneumatical Fixtures Accessories for WA-P-3001 Changeable probe plate, 96 pole internal interface incl. Outside dimensions: 270 x 140 mm Holddown plate made of ESD - acrylic plastic (10mm) Working area: 220 x 110 mm Working area: 230 x160 mm WA-KTP-140 WA-AP-140 Changeable probe plate, spring -mounted, 6 springmounted frames incl., with distance stoppers (3mm) Working area: Raise of case for W-A-P 3001 Height: 45 mm 220 x 110 mm WA-PAP-140 MFG-280-GE-45 Spring-mounted UUT-frames sockets incl. Spring probes for UUT seating,sockets incl. Spring force 3N, Expanded height: 13,3 mm, Expanded height: 13,3 mm Point style: OD 3 mm, (plastic) WA-GPA-13-3N WA-GPA-13-3N-K Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Pneumatical Fixtures WA-P-3001-I Fixture specification - Pneumatical changeable unit with mechanical pressure unit - Outside dimensions: 280 x 450 x 240 mm - Max.working area: 110 x 180 mm - Lower-cost through the changeable unit - Individual completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Internal interfaceholding for max. 3 interface blocks,with pins - deskform for easy handling - No effort because of the dual pneumatical drivesystem ( 24V ) - Costumer specified interface - Case can be opened during the debugging - Probe plate and pushdown plate are not included - Various accessories - Thought out security conception - Check of the contacting position (optional) Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Pneumatical Fixtures Accessories for WA-P-3001-I Deskform with parallel holddown mechanical-system, without changeable probe plates Outside dimensions: 280 x 450 x 240 mm Working area: 110 x 180 mm Raise of case Height: 45 mm WA-P-3001-I MFG-280-GE-45 Interface block, 170 pole, with pins max.3 pieces in a WA-P- 3001-I adjustable, monting material incl. End position switch, 24V signal at Pin 7, closed cover (testposition ) WA-M/P-IF-170 WA-P-3000-SG Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Accessories for WA-P-3001-I Pneumatical Fixtures Changeable probe plate with protecting plate for socket Outside dimensions: 140 x 270 mm Working area: 110 x 180 mm WA-KTP-140-I Techn. Beschreibung: Andruckplatte Holddown plate aus made ESD - of ESD Plexiglas acrylic plastic (10 mm) (10 mm) Außenmaße: Outside dimensions: 160 x 230 mm 160 x 230 mm Bestellnummer: WA-AP-140 Changeable moving plate, spring mounted Outside dimensions: 140 x 270 mm Working area: 110 x 180 mm Interface block, 170 pole, with interface pins, max. 3 pieces in a WA-KTP-140-I adjustable, monting material incl. WA-PAP-140-I WA-KTP-IF-170 Spring probes (3N), socket incl. Expanded height: 13,3mm Point style.: 3 mm (plastic) Spring probes (3N), socket incl. Expanded height: 13,3 mm Point style.: 4 mm (nickel) WA-GPA-13-3N-K WA-GPA-13-3N Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Pneumatical Tandem Fixture WA-P-3001-T Fixture specification - Pneumatical Tanden Fixture with two seperate parallel mechanical pressure unit - deskform for easy handling - No effort because of the dual pneumatical drivesystem (24 V) - Parallel mechanical pressure unit - Outside dimensions : 560 x 450 x 240 mm - Max. UUT size: 2x 110 x 220 mm - Signal for the start by pushing down the pressure unit - Lower-cost through the changeable unit - Individuell completion through the unit assembly system - Fast change of the probe plate and the pushdown plate - Self-closing interface through connectors 96 pole - Customer specified interface - Thought of security conception - Check of the contacting position (optional) - Case can be opened during the debugging - Various accessoires - Probe plate and pushdown plate are not included Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Pneumatical Tandem Fixture Accessoires for WA-P-3001-T Changeable probe plate, 96 pole internal interface incl. Outside dimensions: 140 x 270 mm Working area: 110 x 220 mm Holddown plate made of ESDacrylic plastic (10 mm) Outside dimensions: 160 x230 mm Bestellnummer: WA-KTP-140 WA-AP-140 Holddown element, crosshead with 3 height-adjustable pushdown fingers, mounting material incl. Changeable moving plate, spring-mounted, 6 springmounted frames incl., with distance stoppers ( 3 mm) Length: 160 mm Working area: 110 x 220 mm WA-AE-140 WA-PAP-140 Spring-mounted UUT-frames sockets incl. Raise of case for WA-P-3000 Height: 90 mm Expanded height: 13,3 mm WA-GPA-13-3N MFG-530-GE-90-V2 Spring probes for UUT seating,sockets incl. Spring force 3N, Expanded height: 13,3 mm, Point style: OD 3 mm, safety switch, 24V signal at closed contact on PIN 7 (plastic) WA-P-3000-SG WA-GPA-13-3N-K Büro Süd Waldstr. 4 D-82239 Alling Telefon +49-8141-52 747-0 Telefax +49-8141-52 747-47 Büro Rhein Main Ferdinand-Porsche-Str.17 D-63500 Seligenstadt Telefon +49-6182-89 37-0 Telefax +49-6182-89 37-37 Büro Westfalen Steigerring 25 D-59075 Hamm Telefon +49-2381-99 110-0 Telefax +49-2381-99 110-99 Schweiz Täfernstr. 2a CH-5405 Baden-Dättwil Telefon +41-56-483 25 80 Telefax +41-56-483 25 89 Ungarn Zirnyi M. u. 105 HU-8900 Zalaegerszeg Telefon +36-92 510 740 Telefax +36-92 510 741 Internet gps-prueftechnik.de E-Mail: info@gps-prueftechnik.de
Pneumatical Fixtures WA-P-3010 Fixture specification Pneumatical changeable unit with mechanical pressure unit Outside dimensions: 740 x 510 x 250 mm Max. UUT size : 520 x 295 mm Lower-cost through the changeable unit Individuell completion through the unit assembly system Fast change of the probe plate and the pushdown plate 4 X 96 Interface connectors, standard 384 test points Fixture is suitable for about 600 N (400 probes with 1,5 N spring force) deskform for easy handling No effort because of the dual pneumatical drivesystem (24V) Check of the contacting position (optional) Customer specific interface Case can be opened during debugging Probe plate and pushdown plate are not included Additional accessories updated: Feb. 2011 Subject to technical modifications Page 1
Pneumatical Fixtures Accessories for WA-P-3010 Pneumatical changeable unit WA-P-3010 with mechanical pressure unit Outsite dimension : 740 x 510 x 250 mm Working area : 520 x 295 mm Interface with 4 x 96 pin Connectors Changeable probe plate WA-KTP-410 Material in CEM1 4 x 96 pole internal interface incl. Outsite dimension : 570 x 335 x 10 mm Working area : ca. 520 x 295 mm Protecting plate for sockets WA-HSP-410 Protecting plate for WA-KTP-410 Polycarbonat plate 6mm thick, colourless Outsite dimension : 543 x 316 x 6mm Changeable moving plate WA-PAP-410 Spring mounted with 8 Probes (8x6N) ca. 5mm thick, 15 distance stoppers (3mm) ESD-Material (ca. 10¹² ) Outsite dimension : 570 x 331 x 5 mm Working area : 520 x 295 mm Holddown plate WA-AP-410 ESD-acrylic plastic (ca. 10¹² ), ca 15mm thick Outsite dimension : 576 x 331 x 15 mm Working area : 520 x 295 mm updated: Feb. 2011 Subject to technical modifications Page 2
Shielded RF Test Fixture Pneumatic Fixture WA-HF-4000 Fixture Specification Pneumatic fixture for High Frequency Test Changeable cassette unit with pneumatic pressure frame mechanism Forceless and adjustable compression speed due to doubled pneumatic Cylinders (24V) Parallel pressure frame mechanism Start signal by depressing the pressure frame mechanism (optional) Kit designed as cassette type unit to maximize economy Fast and easy to change upper and bottom probe plate Interface modular and customize configurable Optional: Pylon Interface or G 12 Interface from Virginia Panel Integrated start, stop and reset buttons Running position monitoring (optional) Lockable housing Plug-in module for 4 PCB (100x160 mm) for local electronics Combination of RF, audio and video test For testing mobile telephones, "Bluetooth"-devices and WLAN Suited for acoustic (microphone and speaker) and optic (video camera) test Shielding from external RF-Signals Changeable Kit has to bought separately updated: Feb. 2011 Subject to technical modifications Page 1
Shielded RF Test Fixture Technical Specification Desk Fixture with parallel pressure mechanics, inclusive interface for shielded RF chamber Size: Test Fixture: external dimension: L x D x H 550mm x 520mm x 380mm Complete cassette: external dimension: L x D 260mm x 210mm working area: L x D 180mm x 180mm Weight: incl. cassette unit: 20 kg Temperature: operating temperature: +10 C +40 C storage temperature: -210 C +60 C Humidity: Compressed Air: Power Supply: operating temperature: 90% r.h. no cond. by +10 C +40 C 75% r.h. no cond. by +30 C +40 C storage temperature: 90% r.h. no cond. by +60 C 6 bar oil-free 24V DC/3A for pneum. valve Interface Chamber Interface modular and free configurable Pylon Block Interface for 10 Interface Blocks Order-No.: TSI-50-IF Virginia Panel, G12 (see also G12 Receiver) Order-No.: ITA-G12 Interface HF-Chamber Pneumatic: hose diameter 6mm Pneumatic block: for max. 6 solenoid valves Connecting Panel (D x H): 250mm x 105mm (useable) Earth Connection: thread bolts M5 x 15 as well as snap fasteners Connecting Panel for HF Chamber HF: 2 x SMA-SMA socket Order-No.: HF-37SMA-50-1/1 -- UE Pneumatic: 8 x couplings - bulkhead fitting Order-No.: Festo-SCN-PK-3 Audio: 9-polig. D-Sub, shielded Order-No.: HF-SUB-D-9-M-L Daten: 15-polig. D-Sub, shielded Order-No.: HF-SUB-D-15-M-L Power + Reserve: 25-polig. D-Sub, shielded Order-No.: HF-SUB-D-25-M-L Optional USB connector shielded Order-No.: HF-USB-A-M RF - Shielded without Absorber: with Absorber: Order-No.: WA-HF-4000-ABS 300 MHz. 500 MHz > 60 db 300 MHz. 500 MHz > 75 db 600 MHz. 1000 MHz > 55 db 600 MHz. 1000 MHz > 75 db 1100 MHz 1500 MHz > 50 db 1100 MHz 1500 MHz > 70 db 1600 MHz 2000 MHz > 45 db 1600 MHz 2000 MHz > 60 db 2100 MHz 2500 MHz > 55 db 2100 MHz 2500 MHz > 65 db updated: Feb. 2011 Subject to technical modifications Page 2
Shielded RF Test Fixture Accessories Complete Changeable Fixture Kit WA-HF-400 Consisting of: WA-HF-KTP-400 WA-HF-AP-400 WA-HF-PAP-400 Changeable probe plate WA-KTP-400 Changeable probe plate incl. internal 96 pol. connector Outside dimension: 260 x 210 x 10 mm Working area: 180 x 180 mm Changeable pressure plate WA-AP-400 pressure plate 10mm dick Incl. 4 Pneumatic connector 96 pol. connector Outside dimension: 260 x 210 mm Changeable moving plate WA-PAP-400 Incl. 6 spring probes and distance stopper (3mm) Working area: 180 x 180 mm Spring Probes WA-GPA-13-3N Spring force 3N, incl. sockets Height 13,3 mm, Tip style 4 mm (Nickel/Rhodium) updated: Feb. 2011 Subject to technical modifications Page 3