Products for Bulk Liquid Storage Tanks
2500 Automatic Tank Gauge The industry standard for float and tape tank gauging for over 50 years Provides a level accuracy of 0.2-1 inch (4-25 mm) Continuous level measurement with no power required Meets API Chapter 3.1B regulations for inventory control applications Large, easy-to-read display Suitable for virtually every tank gauging application Negator Cassette Kit The negator cassette kit replaces the existing negator motor and sheave inside a tank gauge to provide the following benefits: Improves the performance by self-aligning the tape and motor Increases reliability and reduces maintenance by protecting the motor from pipe debris Safer, easier and quicker service due to compact unit with no tape to pull or hubs to unwind Accessories & Maintenance Kits A wide variety or components, spares, and kits are avaiable to suit your tanks installation or maintenance requirements, including: Floats, manhole covers & inspection hatches, guidewires and anchors, conduit elbows, oil seals and support brackets Basic kit for annual maintenance Extended maintenance kit for a gauge that has not been maintained for some time Overhaul kit for a gauge on a tank undergoing an API 653 inspection Ancillary Devices Varec offers a choice of cost effective devices for measuring other process conditions, including pressure transmitters, vibration switches, displacer switches, flow meters, etc. 2520 High-Pressure Automatic Tank Gauge Float and tape tank gauge specifically designed for high pressure applications Provides a level accuracy of 0.2-1 inch (4-25 mm) Continuous level measurement with no power required Meets API Chapter 3.1B regulations for inventory control applications Kits for spheres or bullet tanks pressurized to 150 or 300 psig (1136 & 2170 kpa) 2910 Transmitter Integrate a float and tape tank gauge into your inventory management system using the latest and most accuracy encoder technology to date. Supports the following tank gauging communication protocols: Mark/Space (1800-1900), EIA-485 MODBUS, Tankway (L&J), GPE or Whessoe Bus (Whessmatic 550) Precision designed and manufactured absolute capacitance encoder for optimum level measurement accuracy Stainless steel direct-drive gearing ensures smooth, reliable operation 3-Wire RTD temperature input and 2 discrete inputs as standard Optional 4 contact outputs and an additional 2 discrete inputs Optional 2 or 4 SPDT cam-operated switches Independent surge protection - galvanically-isolated power circuit and optically-isolated communications FM/CSA/ATEX/IECEX approved for use in hazardous areas Utilize reliable wireless data communications in hazardous locations Designed for communications between Varec tank gauges or third-party manufactured gauges and an interface device (ModBus) Simple, low cost installation - AC or DC operation 6700 Liquid Level Indicator The simplest float and tape gauging product available indicates level on the side of the tank with no power required Provides an accuracy of 1 inch (25 mm) Durable aluminum gaugeboard with vinyl facing Various installation options available for almost every tank type Activate visual and auible alarms or drive relays with the 2557 ALS 2557 Limit Switch Provides electronic indication of alarms or relays for tank gauging and inventory control applications 2, 4 or 6 SPDT cam-operated switches User selects the level (cam positions) when the contact opens or closes Mounts to most float and tape tank gauges UL/CSA approved for use in hazardous areas 8200 Current Output Transmitter Integrate a float and tape tank gauge into your inventory management system using an analog 2-wire 4-20 ma signal Rugged incremental-brush encoder Optional 2 or 4 SPDT cam-operated switches Optional on-board 115-230 VAC power supply FM approved for use in hazardous areas Temperature Sensors Integrate a spot temperature sensor using a tank gauge transmitter to calculate product volumes Platinum (Pt100) and copper (Cu90 or Cu 100) elements available Universal process connections allow a wide range of compatibility and easy installation
Varec www.tankgauging.com Hybrid () FuelsManager, Varec s industry-leading software is available in four editions: Standard, Professional, Terminal Automation and Enterprise. This allows you to choose an edition that suits the level of functionality your operation requires. Available features include: Inventory Management Terminal Automation Reconciliation & Accounting Inventory Management Resource Management Alarm Management Order Management Trending Load Rack Reports Facility Access Custody Transfer Custom Graphics Intuitive User Interface Optional Features OPC & Interfaces Leak Detection LAN/WAN Networking Title V Emissions Tank Farm Automation Product Movement Tracking HTG Web Server Tank Gauge Interfaces Data acquisition, open systems architecture and host communications Easily expandable through the use of plug-in modules Reduces cost by integrating all analog, digital and serial data inputs and outputs Each module scans all connected tank gauges for measured data, such as level, temperature, density, water level and alarms Connects to most manufacturers tank gauges, sensors or actuators, and also connects to PLCs and DCS computer systems Loop Tank Side Independent
Products for Bulk Liquid Storage Tanks Servo High Pressure High Pressure Hybrid (Servo) Secondary Overfill Protection Servo Custody Transfer Primary Annunciator Alarm Monitoring Vibration Independent High Level Alarm Free Space Displacer Independent High Level Alarm Stilling Well Gaugeboard Level Alarms Varec s wide range of products provide application specific solutions Se Tank G
ervo Gauging Servo Tank Gauges Instrumentation and Sensors Spot Temperature Sensor Servo Tank Gauge Average Temperature Sensor Tank Gauge Tank Gauges Small Horn Gaugeboard Displacer Limit Switch Vibration Limit Switch Tank Side Monitor or Display Pressure Sensor Integrated level alarms with SIL 2 Approval Parabolic Integrated configuration and operation - no additional handheld devices required Planar (Stilling Well) Direct connection of ancillary devices, such as spot or average temperature, water bottom and tank side display Guided Wave Transmitter Tank Gauges Level measurement of liquids in bulk storage tanks for custody transfer (±1 mm) and inventory control (±3 to 10 mm) applications Continuous, non-contact level measurement with no moving parts, provides extremely low maintenance Guided Wave Cost effective installations - choose between 2- or 4-wire intrinsically safe technology Underground Storage Magnetostrictive & Leak Detection Custody transfer accuracy +/- 0.03 (0.7 mm) Horn Rod Magnetostrictive Tank Gauge Mechanical Level Switch Measurement of level, interface level, water bottom and density of liquids in bulk storage tanks Easy on-tank commissioning, diagnostics and operation via menu-driven alphanumeric display Tank Side Monitors and Displays Convenient monitoring, integration and control of all tank sensors Intrinsically safe power supply, communication and gradelevel display for Varec radar tank gauges Remote Connect up to 6 HART devices via intrinsically safe 2-wire communications Integrated configuration and operation - no additional handheld devices required Approved for use in explosion hazardous areas Magnetostrictive & Leak Detection Temperature & Water Bottom Sensors Transmitters, spot and average temperature sensors and water bottom probes can be combined and configured for your specific requirements Integrate over 50 different models of tank gauges from various manufacturers into a single system. Varec Enraf Saab GSI L&J Whessoe Motherwell Endress+Hauser Sakura Tokyo Keiso GPE HART Barton Instruments Texas Instruments 4-20 ma Current Loop MTS MODBUS Intrinsically safe device, allowing for the safest electrical configuration possible Universal configuration - compatible with other manufacturers products Variety of process connections and cable entries allow a wide range of compatibility, easy installation and worldwide classifications
Products for Bulk Liquid Storage Tanks For More Information Varec Headquarters 5834 Peachtree Corners East Norcross (Atlanta), GA 30092 USA Tel: +1 (770) 447-9202 Toll Free: +1 (866) 698-2732 Fax: +1 (770) 662-8939 www.varec.com Houston Sales Office 363 N Sam Houston Pkwy East Suite 1100 Houston, TX 77060 USA Tel: (281) 820-7826 Fax: (281) 498-0183 Asia Pacific Sales Office Level 8, 91 William St. Melbourne Victoria 3000 Australia Tel: +61 3 8623 6400 Fax: +61 3 8623 6401 www.varec.com.au Europe Sales Office Suite 120, 94 London Road Headington, Oxford Oxfordshire, OX3 9FN United Kingdom Tel: 0800 044 5704 Fax: 0844 544 1874 www.varec.co.uk Measurement Control Automation Integration Enterprise Support 2012 Science Applications International Corporation. All rights reserved. Varec, and the Varec logo are registered trademarks of Varec, Inc. in the US and/or other countries. Varec inc is a subsidiary of Science Applications International Corporation. Document Code: PRO027GVAE2713