OM4 Capability Brochure. www.fibrefab.com

Brochure www.fibrefab.com

About FibreFab FibreFabtm Established in 1992, FibreFab is a leading provider of fibre optic connectivity products used in data communications and telecommunication networks. The company designs, develops, manufactures and sells fibre optic cabling, connectivity, management and systems solutions. It offers a broad range of products directly and through distributors, installers and OEM partners. Customer Service FibreFab s growth has been founded on quality products, rapid response and excellent customer service. Quality All products are manufactured in ISO9001:2000 certified facilities and conform to applicable international standards and FibreFab is dedicated to value and continuous improvement of all its products and services. Global Logistics Optronics In 1994 FibreFab acquired Optronics, a company with over 20 years experience in fibre optic manufacturing. FibreFab products are available directly from FibreFab or from our worldwide distribution partners. Wide Range The Optronics fibre-optic cable range includes simplex, duplex and flat ribbon patchcords, tight buffered, single loose tube and multi loose tube distribution cables for internal and external applications as well as many variations of armoured, aerial, rodent resistant and water blocked cables. Solutions The FibreFab Optronics range has the solution for almost any application and can offer a cut to length service for specific fibre optic cables. Please call the sales team for more information. With headquarters in Milton Keynes (UK), FibreFab has manufacturing activities in the UK and China. The Company has both volume and quick response manufacturing capabilities and is able to support the global logistics requirements of its customers. FibreFab provides customised and customer branded products for OEM customers. UK Rapid Response & Production Facilities Chinese Production Facility FibreFab UK FiberFab Inc USA Optronics FZ LLC Dubai FibreFab Hong Kong

available What is OM4? OM4 is a laser-optimised, high-bandwidth 50µm multimode cabled fibre, defined in IEC (ISO/IEC 11801), EN 50173-1 and TIA/EIA 492AAAD. OM4 provides higher bandwidth compared to OM3 when measured at 850nm. OM3 OM4 850nm High Performance EMB (MHz.km) 2000 4700 850nm Legacy Performance OFL (MHz.km) 1500 3500 1350nm Legacy Performance OFL (MHz.km) 500 500 What is the benefit of OM4? Higher bandwidth allows longer channel lengths for high speed applications and provides more head room for richer network design. Typical implementation of OM4 is for requirements between 300m and 550m at 10Gb/s or between 100m and 125m at 40Gb/s or 100Gb/s. PRE-TERMINATED SOLUTIONS OM3 OM4 Max Channel Length at 850nm 300m 550m G.657A and G.657A/B PureLight also available G.657A and G.657A/B PureLight also available Does FibreFab offer OM4 products? Yes. All standard multimode products are available with OM4 cabled fibre. Contents An Introduction to OM4 Cable and Connectivity Solutions 4 OM4 Patchcords 6 OM4 Premium Patchcords 8 OM4 Uniboot Patchcords 10 OM4 Fibre Pigtails 12 Ultra High Density Pre-Terminated OM4 MTP Trunk and Fan-out Cables 14 OM4 Fibre Optic Cables 18 OM4 MTP Cassette Modules 24 Patch Panels for use with OM4 MTP Cassette Modules 26 OM4 High Density MTP Slimline Panel 28 Ultra High Density 1U Modular Patch Panel 30 OM4 SC Adaptors 34 OM4 LC Adaptors 35

4 An Introduction to OM4 Cable and Connectivity Solutions OM4 50/125 Multimode Optical Fibre Description OM4 is the latest high modal bandwidth high performance 50/125 Graded Index Multimode (GIMM) cabled fibre specification. OM4 fibre enables extended range performance over high bit rate links such as 8 Gigabit Fibre Channel and 10 Gigabit Ethernet compared to existing fibre types. FibreFab offer a wide range of OM4 compliant cable assembly products in both standard OM4 and Reduced Bend Sensitivity (RBS) OM4 variants. OM4 cabled fibre fully meets the following international specifications: OM4 is the preferred cabled fibre type for high performance data centre and enterprise networks using or planning to use high bandwidth protocols for which channel spans may exceed 150m. For example, ISO/IEC 11801 supports the maximum channel span for 10 Gigabit Ethernet (10GBASE-SR, 10 Gb/s at 850nm) over standard 50/125 optical fibres as shown below: ITU-T G.651.1 IEC 60793-2-10 type A1a.3 ISO/IEC 11801 2.0 A2 OM4 TIA/EIA-492AAAD Telcordia GR-20-CORE OM1 OM2 OM3 OM4 33m 82m 300m 550m Let s take a closer look at 10G Ethernet. The basic power budget is about 6dB but this is degraded for longer link lengths due to signal distortions such as modal dispersion. These distortions mean that the detector requires more power to operate. The way this extra power is accommodated in channel planning is through a power penalty. In our example, the power penalty increases from 0 to almost 5dB for the maximum channel length. The penalty is not linear and increases dramatically as the maximum length is reached. In designing the channel, a key factor is the power budget available for connection loss. This is the total power budget inclusive of penalties reduced by the cable attenuation, leaving that portion of the power budget that may be used to cover connector insertion loss, splice loss, bend loss and contamination. The table opposite shows that at 300m with OM3 the loss available for all connections is only 1.79dB. On the other end OM4 allows up to 4.55dB, an increase of 2.76dB. A typical data centre channel may have eight connections. For OM3, the average loss must be less than 0.24dB, including all factors which means premium terminations must be used and there is no margin for installation faults, pinched cables or any other channel problem With a budget of 0.57dB per connection, OM4 allows considerable headroom to support a stable network. FOR MORE INFORMATION CALL +44 (0)870 127 3330

5 Link Loss Budgets for 10G Ethernet over OM3 or OM4 Links* (10G Base-SR, 850nm, laser launch, 2.7dB per km cable attenuation) 7 6 5 4 3 2 1 OM3 OM4 Standards Compliance ITU-T G.651.1 IEC 60793-2-10 type A1a.3 ISO/IEC 11801 2nd Edition OM4 TIA/EIA-492AAAD Telcordia GR-20-CORE 0 10 30 50 100 150 200 250 300 350 400 450 500 550 Link Length (metres) Total Loss Budget (db) Max Connection Loss (db) Cable Loss (db) OM3 OM4 OM3 OM4 10 6.00 6.05 0.03 5.97 6.02 30 5.99 6.05 0.08 5.91 5.97 50 5.92 6.04 0.14 5.79 5.91 100 5.70 5.99 0.27 5.43 5.72 150 5.25 5.91 0.41 4.85 5.51 200 4.65 5.78 0.54 4.11 5.24 250 3.80 5.60 0.68 3.13 4.93 300 2.60 5.36 0.81 1.79 4.55 350 5.05 0.95 4.11 400 4.65 1.08 3.57 450 4.15 1.22 2.94 500 3.52 1.35 2.17 550 2.62 1.49 1.14 *Indicative values, call for guidance Observations Up to 150m, there is no meaningful difference between OM3 and OM4 and the power budget is still very reasonable At 200m and longer, the benefit of OM4 is substantial and may allow networks with more flexibility points, use of standard grade terminations or tolerance of loss due to contamination or bends Above 250m, OM3 links have very low connection loss available and must be designed with very careful attention to function. Premium grade terminations must be used and installation practices are critical The same comments apply to OM4, but for longer lengths approaching the maximum span of 550m In applications that have been, or may be connected in spans approaching the fibre type limit, premium terminations and reduced bend sensitivity fibre may provide real benefits,om3 connectivity for OM3 links and OM4 connectivity for OM4 links Recommendations Use OM4 as a future proof solution for data centre and other high performance network applications where total channel lengths may now or in future exceed 200m Take maximum benefit from using OM4 by using Premium patchcords that are made with high concentricity ferrules delivering less insertion loss than standard patchcords. MTP products should be fitted with Elite grade connectors Premium patchcords are tested using the latest Encircled Flux compliant methods Fit OM4 assembly products with colour differentiated connectors (e.g. Erika Violet) to visually display fibre type. Also use colour differentiated LC adaptors to indicate OM4 fibre used in fixed links. Most data centre connections will be LC for single fibres and MTP for multiple fibres Use only patchcords that are factory tested using encircled flux compliant methods. Use only encircled flux compliant launch sources for installation testing Use microcable to reduce any change of network outage loss during installation as well as in use VISIT US ONLINE NOW WWW.FIBREFAB.COM

OM4 Patchcords Optical Fibre Patchcords Description FibreFab multimode patchcords are used to connect high speed and legacy networks like Gigabit Ethernet, Fast Ethernet and Ethernet. The multimode patchcords are manufactured using LSZH cables which conform to IEC, EIA TIA and Telecordia standards. The OM4 patchcords are terminated with standard FibreFab connectors providing very reliable optical performance. Features SC, LC connectors (Small Form Factor (SFF)) Low smoke zero halogen (LSZH) cable in Aqua or Erika Violet 900µm tight buffer OM4 fibre conforms to ITU-T G.651.1, TIA/EIA 492AAAD Simplex and duplex assemblies Duplex assemblies available with clips (SC and LC) Different connector performance range for specific application Applications For use in 10 Gb/s high speed LAN networks in longer than a 300m indicative link length at 850 nm (SX) wavelength using a laser launch For use in 1 Gb/s high speed LAN networks longer than a 1000m indicative link length at 850 nm (SX) wavelength using a laser launch High speed and legacy networks including Gigabit Ethernet, Fast Ethernet and Ethernet Data centres Premises cabling in data networks including backbone, riser and horizontal Supports video, data and voice services FOR MORE INFORMATION CALL +44 (0)870 127 3330

7 OM4 Patchcords Technical Information Connector Specification Optical Performance Multimode Conformance Insertion loss (MAX) 0.30dB IEC 61300-3-4 Ave/Master* 0.15dB IEC 61300-3-4 Ave/Random* 0.20dB IEC 61300-3-34 Cable Specification Standards Compliance TIA/EIA 568C TIA/EIA 492AAAP ISO/IEC 11801 Characteristics Simplex Duplex Cable Material LSZH or PVC LSZH or PVC Strength Member Aramid Aramid Crush (N) 1000 1000 Operating Temperature ( C) -20 to 60-20 to 60 Cabled Fibre Specification Characteristics Attenuation (db/km) 2.8 @ 850nm / 0.8 @ 1300nm Min Bandwidth OFL (MHz x km) 3500 @ 850nm / 500 @ 1300nm Min Bandwidth LEMB (MHz x km) 4700 @ 850nm / 500 @ 1300nm Max Ethernet Transmittable Distance See page 4 Part Number Generator Connectors End 1 1 Connectors End 2 1 Cable Type Cable Configuration Cable Colour Length (m) LC LC LC LC OM4 OM4 Simplex S Aqua AQ 1 SC SC SC SC Duplex D Erika Violet 4 EV 4 2 3 5 10 Example Part Number: 1 Other Connectors available on request 2 MTRJ is only available in MiniZip SC ST OM4 D AQ 2 SCSTOM4DAQ2 will generate a 2 metre SC to ST OM4 Duplex patchcord in aqua. VISIT US ONLINE NOW WWW.FIBREFAB.COM

8 OM4 Premium Patchcords Description FibreFab premium range patchcords are suitable for low loss telecom, datacom, data centre and some critical applications. The patchcords provide flexible interconnection to active equipment, passive optical devices and cross-connects. The patchcords are terminated with premium range physical contact zirconia ferrule connectors which are manufactured with precision factory mounting and polishing techniques which helps assure high transmission quality. Features / Benefits Conform to IEC, EIA-TIA, and Telecordia performance requirements Available with different connector types Available in standard and custom lengths RoHS REACH SvHC compliant Applications Data centre Telecommunication networks CATV LAN and WAN FTTX Broadband network Part Number Generator P Connectors End 1 1 Connectors End 2 1 Cable Type Cable Configuration Cable Colour Length (m) FC FC FC FC OM4 OM4 Simplex S Aqua AQ 1 LC LC LC LC Duplex D Erika Violet EV 2 SC SC SC SC 3 5 10 1 OM4 Only Example Part Number: SC SC OM4 D AQ 2 P SCSTOM4DAQ2P will generate a 2 metre SC to SC OM4 Duplex Premium patchcord in aqua. FOR MORE INFORMATION CALL +44 (0)870 127 3330

9 OM4 Premium Patchcords Technical Information Connector Specification Optical Performance Multimode Conformance Insertion loss (Typ) 0.15dB IEC 61300-3-4 Insertion loss (97%) 0.25dB IEC 61300-3-34 Ave/Master* 0.08dB IEC 61300-3-4 Ave/Random* 0.10dB IEC 61300-3-34 Return Loss - IEC 61300-3-6 Standards Compliance TIA/EIA 568C TIA/EIA 492AAAP ISO/IEC 11801 Mechanical Properties Criteria* Conformance Mechanical endurance 500 matings IEC 61300-2-2 Vibration 10-55 Hz, 0.75 amplitude IEC 61300-2-1 Drop Drop height 1m, 5 drops IEC 61300-2-12 Cable retention Magnitude 90 N IEC 61300-2-4 Cable torsion 15N - 25N for 2mm-3mm cable diameter IEC 61300-2-5 * The change in attenuation for all the above listed criteria shall be a maximum of 0.20dB Connector Conformance Multimode MM Duplex SC IEC 61754-4 MM PC- Aqua MM PC - Aqua with clips Boot - Red & Black LC IEC 61754-20 MM PC- Aqua White boot MM PC - Aqua with clips White boot ST IEC 61754-2 MM PC- Black boot MM PC - Red & Black boot FC IEC 61754-13 MM PC- Black boot MM PC - Black boot IMP: Please note that the LC 2mm connectors will have heat shrinks to serve the purpose of cable retention. C clips will be provided for channel identification of duplex FC and ST patchcords. Cable Specification Characteristics Units Characteristic Cable Material Strength Member LSZH or PVC Aramid Crush N 1000 Operating Temperature C -20 to +60 Secondary Buffer Diameter (2.0mm, 2.4mm and 3.0mm) µm 900±50 Secondary Buffer Diameter (1.6mm and 1.8mm) µm 600±50 Minimum Bending Radius mm 10D (installed) 20D (loaded) IMP: The patchcords are available in standard length of 1m, 2m, 3m, 5m, and 10m. For other lengths please contact FibreFab for the actual lead times. VISIT US ONLINE NOW WWW.FIBREFAB.COM

10 OM4 Uniboot Patchcords As the networking environment of today becomes increasingly dependent on high speed and high density solutions, effective cable management is a real issue. The key concern is how to manage more cable in less space. The FibreFab Uniboot fibre patchcord reduces cable management space compared to standard patchcords. The body of the connector also prevents users from altering the polarity of the patchcord. The patchcord utilises a special round duplex cable that allows duplex transmission within a single 3mm cable. As a result of these unique features the FibreFab Uniboot patchcord offers improved airflow and visibility of equipment within a high density network environment. The FibreFab Uniboot patchcord is available in a wide variety of cable styles. Features & Benefits LC or SC connectors available Full duplex in a single 3mm cable Available with LSZH Cost effective Save space in cabinets and cable ways Protects network polarity Standard Uniboot Standard Boots UNIBOOT FOR MORE INFORMATION CALL +44 (0)870 127 3330

11 OM4 Uniboot Patchcords Technical information Connector Specification Optical Performance Multimode Premium** Standard Conformance Insertion loss (MAX/MASTER) 0.15 db 0.30dB IEC 61300-4 Insertion loss (97%) 0.25 db 0.40dB IEC 61300-34 Ave/Master 0.08dB 0.15dB IEC 61300-4 Ave/Random 0.10dB 0.20dB IEC 61300-34 ** Recommended for high performance and low loss connection for efficient data transmission Cable Specification Characteristics Units Round Duplex Cable Material LSZH Strength Member Aramid Crush N100mm 1000 Operating Temperature C -20 to 60 Secondary Buffer Diameter µm 900+50 Minimum Bending Radius mm 10D (installed) 20D (loaded) Part Number Generator UNI Connector End 1 Connector End 2 Cable Type Cable Configuration Cable Colour Length (m) LC LC LC LC OM4 OM4 Duplex D Aqua AQ 1 SC SC SC SC Erika Violet EV 2 3 5 XX Example Part Number: LC LC OM4 D EV 1 UNI LCLCOM4DEV1UNI will generate a 1 metre LC to LC OM4 Duplex Uniboot patchcord in Erika Violet. VISIT US ONLINE NOW WWW.FIBREFAB.COM

12 OM4 Fibre Pigtails Description FibreFab multimode pigtails are used to connect high speed networks like Gigabit Ethernet, Fast Ethernet and Ethernet. The multimode pigtail buffer conforms to IEC, EIA TIA and Telecordia standards. The multimode pigtails are terminated with standard FibreFab connector which gives optimum optical performance. Features / Benefits SC, LC, ST, FC connectors Low smoke zero halogen (LSZH) buffer 900μm tight buffer or easy strip OM4 pigtail is available in standard aqua colour Multimode fibre conforms to ITU-T G.651.1, TIA/EIA 492AAAA Different connector performance range for specific application Available in standard 12 colours as per IEC 60304 Available in standard and blister packs Applications Networks including Ethernet, Fast Ethernet and 10GE Internal interconnect Ideal for a wide range of telecom, datacom and process control applications where ruggedisation is required Suitable for repeated handling in patch panels and racks Standard Packaging Blister Packaging FOR MORE INFORMATION CALL +44 (0)870 127 3330

13 OM4 Fibre Pigtails Technical information Buffer Specification Characteristics Units Simplex Crush N/100mm 500 Operating Temperature C -20 to 60 Nominal buffer Diameter µm 900+50 Max Tensile Load N 6 Fibre Specification Characteristics Attenuation (db) / km Bandwidth OFL (MHz x km) Numerical Aperture (NA) See page 26 Connector Specification Optical performance Multimode Conformance IL Max/Master (Acceptance) 0.30 db IEC 61300-3-4 Ave/Master* 0.15 db IEC 61300-3-4 Ave/Random* 0.20 db IEC 61300-3-34 Part Number Generator B Connector Cable Type Length (m) Cable Construction and Packaging Style LC LC OM4 OM4 1 Tight buffer Leave blank SC SC 2 Example Part Number: LC OM4 B 1 LCOM4B112/1B will generate a 1 metre LC OM4 Tight Buffered Pigtail Tight buffer pack of 12 Tight buffer blister pack of 12 Easy strip Easy strip pack of 12 Easy strip blister pack of 12 12/1B 12BP Easy E-12/1B E-12BP VISIT US ONLINE NOW WWW.FIBREFAB.COM

14 Ultra High Density 24 Pre-Terminated OM4 MTP Trunk and Fan-out Cables fibres 12, 24 or 48 Description FibreFab MTP trunk and fan-out multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data centres and other high fibre environments, reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MTP Fan-outs, spanning MDA, HDA and EDA zones. MTP trunk assemblies are offered in all fibre types in standard 12, 24 or 48 core versions using a compact and rugged microcable structure. The compact cables optimise cable way use and improve airflow. FibreFab MTP trunks and Fan-outs are built with highest quality components. Standard MTP as well low loss Elite versions are offered featuring low insertion loss for demanding high speed networks where power budgets are critical. Benefits MTP Interface - MTP components feature superior optical and mechanical properties Optimised Performance - low loss MTP Elite, discrete Premium connectors and OM4 fibre assures low insertion losses and power penalties in tight power budget high speed network environment High Density - multifibre connector and compact dimension of ruggedised microcable ease space in costly data centre environments Rapid Deployment - factory terminated modular system saves installation and reconfiguration time during moves, adds and changes Reliability - 100% tested. A combination of high quality components and FibreFab manufacturing quality control guarantees product of the highest standards Next Generation Network Proof - emerging high speed protocol are going to use MTP interface - your cabling infrastructure remains unchanged Please refer to the fibre specification datasheets for OM1, OM2, OM3, OM4, OS1/2 (ITU-T G.652) and ITU-T G.657A1 Features 12, 24 and 48 core microcable trunk LSZH, OFNP cable jacket Female (standard) and Male MTP connectors Polarity A (standard), B or C Factory terminated and tested Application Data Centre Infrastructure Storage Area Network - Fibre Channel Parallel Optics Infiniband Emerging 40G and 100G Protocols Standards Compliance TIA/EIA-568-C.3 and ISO/IEC 11801 IEC-61754-7 & EIA/TIA-604-5 NFPA 262 (OFNP) or IEC 60332-1 (LSZH) TIA/EIA 568-B.1-7 Compliant to Directive 2002/95/ EC (RoHS) and REACH SvHC FOR MORE INFORMATION CALL +44 (0)870 127 3330

OM4 MTP Trunk and Fan-out Cable Options MTP to MTP MTP to Fan-Out Pre-terminated with a MTP connectors at both ends the MTP to MTP trunk cable offers a true Plug and Connect installation. Quick, simple and ideal for fast turn moves, adds and changes (MAC). 12, 24 or 48 Fibres Pre-terminated with an MTP connector on one end and a extensive range of connector styles on end B, the MTP to Fan-out offers true versatility to connect to passive and active equipment. 12, 24 or 48 Fibres MTP to Open End Pre-terminated with a MTP connector on end A the MTP to Open End B provides the installer with the convenience of a high performance MTP connector pre-terminated on one end, tested and polished, ready for installation. FUTURE INNOVATION 12, 24 or 48 Fibres FibreFab s research and development team are continually investigating higher fibre count options for the MTP connector, allowing for even greater flexibility in the near future VISIT US ONLINE NOW WWW.FIBREFAB.COM 15

16 OM4 MTP 24 Trunk and Fan-out Cables Technical Information fibres 12, 24 or 48 Cable Performance Fibre Type (ISO/IEC 11801) Attenuation Coefficient [db/km] Minimum Bandwidth: Overfilled Launch [Mhz-km] Minimum Bandwidth: Laser Effective Modal Bandwidth [Mhz-km] Technical Specification OM4 3.5 Max (850nm) 1.5 Max (1300nm) 2.7 Typ (850nm) 0.9 typ (1300nm) 3500 (850nm) 500 (1300nm 4700 (850nm) Connector Performance Connector Mating IL Average IL Max Return Loss MTP (MM) 0.20dB 0.60dB NA MTP (SM) 0.25dB 0.75dB >60dB MTP Elite (MM) 0.10 db 0.35 db NA MTP Elite (SM) 0.10dB 0.35dB >60dB Element Fibre Cable Connectors Packaging Operating Temperature Storage Temperature Characteristic OM4 (IEC 60793-2-10-A1a.3) Microcable- 12, 24 cores (IEC 60794), Max OD 12/24 cores 4.5 ± 0.3mm / Max OD 24/48 cores 4.5 x 7.4 ± 0.3mm, Jacket material: LSZH (IEC 60332-1), OFNP (NFPA 262) Jacket colour: Aqua or Erika Violet MTP US Conec (IEC-61754-7 & EIA/TIA-604-5) Boot Colour: Black Body Sleeve Colour: MM (Beige), MM Elite (Aqua), SM (Green), SM Elite (Yellow) LC or SC (IEC 61754-20) Boot Colour: White Housing Color: Beige Length< 100m PE bag / Length> 100m Drum -20 to ~ +60 C -40 to ~ +70 C FOR MORE INFORMATION CALL +44 (0)870 127 3330

17 OM4 MTP Trunk and Fan-out Cables Technical Information Cable Diagram For Trunk Cables Length 150 150 150 1 2 3 6 4 5 1. MTP Connector 2. MTP Connector Boot 3. Fibre Optic Microcable 4. Serial Number Label 5. Channel ID Clip 300 6. Heatshrink 150 Length 150 300 150 Cable Diagram For Fan-out Cables Length Tail Length typical 1mtr 150 mm 150 mm 1 2 3 5 4 6 7 8 10 9 1. MTP Connector 2. MTP Connector Boot 3. Fibre Optic Microcable 4. Heatshrink 5. Serial Number Label 6. Breakout Module 7. 2 mm Furcating Tubes 8. ID Clip 9. Discrete Connector 10. Discrete Connector Boot VISIT US ONLINE NOW WWW.FIBREFAB.COM

18 OM4 MTP Trunk and Fan-out Cables Ordering Information Part Number Generator For Trunk Cables Connector END A Gender A Connector END B Gender B Fibre Type Fibre Count Cable Length (m) Polarity Colour Jacket Type MTP standard MTP Female F MTP standard MTP Female F OM4 OM4 12 XX A Aqua AQ LSZH standard LS MTP Elite MTPE Male M MTP Elite MTPE Male M 24 B Erika Violet EV OFNP PL 48 C Example Part Number: MTP F MTP F OM4 12 16 A AQ LS MTPFMTPFOM41216AAQLS will generate a 16 metre 12 Core MTP female to MTP female OM4 polarity method A, Jacket colour Aqua LSZH trunk assembly. Part Number Generator For Fan-out Cables DF Connector END A Gender A Fibre Count Connector END B Fibre Type Cable Length (m) Colour Jacket Type MTP standard MTP Female F 12 LC LC OM4 OM4 XX Aqua AQ LSZH Leave Blank MTP Elite MTPE Male M 24 SC SC Erika Violet EV OFNP PL 48 Example Part Number: MTP F 12 LC OM4 DF 16 AQ MTPF12LCOM4DF16AQ will generate a 16 metre 12 core MTP female to LC OM3, Jacket colour Aqua LSZH ruggedized fan-out. FOR MORE INFORMATION CALL +44 (0)870 127 3330

19 OM4 Fibre Optic Cables OM4 50/125 Multimode Optical Fibre Description FibreFab specification for standard OM4 50/125 graded index multimode optical fibre. Cabled values are given where appropriate. All fibre parameters meet or exceed the following generic and laser optimised 50/125 requirements (some information may be provisional). ITU-T G.651 IEC 60793-2-10 type A1a.3 ISO/IEC 11802 3rd Edition OM-4 TIA/EIA-492AAAD Telcordia GR-20-CORE Features Low smoke zero halogen (LSZH) cable in Aqua or Erika Violet colour 900µm tight buffer OM4 fibre conforms to ITU-651, TIA/EIA 492AAAD Compatible with OM2 and OM3 networks Meets or exceeds all OM4 requirements Applications For use in 10Gb/s high speed LAN networks over a 550m indicative link length at 850nm (SX) wavelength using a laser launch High speed and legacy networks including Gigabit Ethernet, Fast Ethernet and Ethernet All OM4 FibreFab cable constructions including tight buffered, loose tube and ribbon Data centres Premises cabling in data networks including backbone, riser and horizontal Supports video, data and voice services VISIT US ONLINE NOW WWW.FIBREFAB.COM

20 OM4 Fibre Optic Cables OM4 50/125 Multimode Secondary Coated Fibre 1 Simplex Cable 2 Zip Duplex Cable 3 Flat Duplex Cable 4 Round Duplex Cable 5 Flat Ribbon Cable 6 Microcable 7 Tight Buffered Distribution Cable 8 Tight Buffered Distribution Multi-core Cable 9 Breakout Cable 10 Single Loose Tube Cable 11 Steel Tape Armoured Single Loose Tube Cable 12 Dry Single Loose Tube 13 The Fibre Optic Cable catalogue is available, please ask your copy or download it on www.fibrefab.com 4 3 7 2 5 6 13 10 FOR MORE INFORMATION CALL +44 (0)870 127 3330

8 Description 9 11 12 FibreFab Offer an extensive range of OM4 fibre optic cables to suit most applications, in the data and telecom environments. Should you require a specific cable not featured. Please call us to discuss your requirement 1 7 3 4 2 5 6 13 10 VISIT US ONLINE NOW WWW.FIBREFAB.COM 21

22 OM4 Fibre Optic Cables Technical Information Technical Specification Parameter Unit Value General Characteristics Graded index multimode optical fibre with doped silica core and silica cladding. Dual layer UV cured acrylic resin primary coatings. Geometrical Characteristics Core diameter µm 50 ± 2.5 Core non-circularity % 5 Cladding diameter µm 124.9 ± 1.1 Cladding non-circularity % 1.0 Core/cladding concentricity error µm 1.5 Coating/cladding concentricity error µm 12 External diameter (uncoloured) µm 244.5 ± 7.5 Transmission Characteristics Maximum attenuation fibre @ 850nm db/km 2.3 Maximum attenuation fibre @ 1300nm db/km 0.6 Maximum attenuation cabled @ 850nm db/km 3.5 Maximum attenuation cabled @ 1300nm db/km 1.5 Typical attenuation cabled @ 850nm db/km 2.7 Typical attenuation cabled @ 1300nm db/km 0.9 Zero dispersion wavelength λ 0 nm 1295 Parametre Unit Value 1340 Zero dispersion slope S 0 ps/(km 2 km) 0.11 Standards Compliance ITU-T G.651 IEC 60793-2-10 type A1a.3 ISO/IEC 11802 3rd Edition OM-4 TIA/EIA-492AAAD Telcordia GR-20-CORE Numerical Aperture (NA) 0.200 ± 0.015 Modal bandwidth @ 850nm overfilled LED MHz km 3500 Modal bandwidth @ 1300nm overfilled LED MHz km 500 Effective Modal bandwidth @ 850nm laser launch MHz km 4700 Group refractive index @ 850nm 1.480 Group refractive index @ 1300nm 1.479 Fibre irregularities point and whole length @1300nm db 0.1 Environmental Characteristics Fibre temperature dependence -60 o C to +85 o C db/km 0.1 Fibre temperature and humidity cycling -10 o C to +85 o C, 90% R.H. Fibre watersoak dependence 20 o C for 30 days Mechanical Characteristics db/km 0.1 db/km 0.2 Proof test fibre strain for 1 second equivalent % 1 Bending dependance 100 turns 75mm diameter 850nm & 1300nm db 0.5 Typical mean coating strip force N 1.0 to 3.0 FOR MORE INFORMATION CALL +44 (0)870 127 3330

23 OM4 Cable and Patch Cable Part Number Generator Part Number For Secondary Coated Fibre Cable Description OM4 Tight 900µm White Tight Buffered OM4 Easy Strip 900µm White Tight Buffered Part Number OM4WH-C OM4WHEASY-C Part Number Generator For OM4 Cables Fibre Type Cable Type OM4 OM4 Microcable MICRO 2 Fibre Count * Jacket Type Colour LSZH standard U Aqua AQ Tight Buffered TB 4 Erika Breakout BO 8 Violet EV Loose Tube LT 12 Loose Tube Steel Tape Armoured Dry Loose Tube LTSTA 24 DT *: Up to 144 fibres upon request. MOQ may apply Example Part Number: OM4 BO 24 U AQ OM4BO24UAQ will generate a 24 Core Breakout OM4 Cable, Jacket colour Aqua LSZH. Part Number Generator For OM4 Patchcord Cable Fibre Type Cable Diameter Cable Type Jacket Type Colour OM4 OM4 1.6mm 16 Simplex SIM01 LSZH standard U Aqua AQ 1.8mm 2.0mm 18 20 Zip Duplex Flat Duplex ZIPD02 FLATD02 Erika Violet 2.4mm 24 2.8mm 28 3.0mm 30 EV Example Part Number: OM4 20 ZIPD02 U AQ OM420ZIPD02UAQ will generate a 2mm zip duplex OM4 LSZH Aqua cable. VISIT US ONLINE NOW WWW.FIBREFAB.COM

24 OM4 MTP Cassette Modules Description FibreFab MTP Cassette Modules provide secure transition between MTP and LC or SC discrete connectors. They are used to interconnect MTP backbones with LC or SC patching. Modular system allows for rapid deployment of high density data centre infrastructure as well as improved troubleshooting and reconfiguration during moves, adds and changes. Cassettes can be mounted in 1U or 3U 19 multislot chassis. MTP Cassettes contain factory controlled and tested MTP -LC fan-outs to deliver optical performance and reliability. Low loss MTP Elite and LC or SC Premium versions are offered featuring low insertion loss for demanding power budget high speed networks. Features MTP (US Conec) brand MPO standard compliant multifibre connector LC (SFF Data Centre standard), SC discrete interface OS1/2, OM3, OM4 fibre grades (OM1 and OM2 available) 12 and 24 fibre versions - 12 LC (Duplex) / SC (Simplex) optical parts Polarity A (standard), B or C Factory Terminated and Tested High performance zirconia sleeve adaptors Compatibility: Benefits Rapid Deployment - factory terminated modular system saves installation and reconfiguration time during moves, ads and changes MTP Interface - MTP US Conec brand components feature superior optical and mechanical properties Optimised Performance - low loss MTP Elite, discrete Premium connectors and OM4 fibre assures low insertion losses and power penalties in tight power budget high speed network environment High Density - 12 or 24 fibre cassettes can be mounted in 1 U scaling up to 72 or in 3 U scaling up to 336 discrete connectors Reliability - 100% Tested. A combination of high quality components and FibreFab manufacturing quality control guarantees product of the highest standards 1U Chassis Scaling up to 72 Discrete Fibres Part Number: S13XXX00 Application Data Centre Infrastructure Storage Area Network- Fibre Channel Parallel Optics Standards Compliance TIA/EIA-568-C.3 and ISO/IEC 11801 IEC-61754-7 & EIA/TIA-604-5 - MTP Compliant to Directive 2002/95/EC (RoHS) and REACH SvHC IEC-61754-20 (LC) & IEC-61754-14 (SC) IEC-60793 Connector Performance 3U Chassis Scaling up to 336 Discrete Fibres Part Number: LGXCHASSIS Connector mating Il average Il max Return loss Connector mating Il average Il max Return loss MTP Elite (MM) 0.10 db 0.35 db NA MTP Elite (SM) 0.10 db 0.35 db >60dB MTP (MM) 0.20 db 0.60 db NA MTP (SM) 0.25 db 0.75 db >60dB LC, SC Premium (MM) 0.08dB 0.15dB NA LC, SC Premium (MM) 0.12dB 0.15dB >55/65dB* LC, SC (MM) 0.15dB 0.30dB NA LC, SC (SM) 0.18dB 0.30dB >55/65dB* * UPC/APC FOR MORE INFORMATION CALL +44 (0)870 127 3330

25 OM4 MTP Cassette Modules Technical Specifications Element Characteristics Fibre OM4 (ISO/IEC 60793) Adaptors MTP US Conec (IEC-61754 &EIA/TIA-604-5) LC Duplex (IEC 61754-20) Body Colour: Body Colour: Black Polarity A/C: Keyway up- Keyway-down Grey: Polarity B Keyway up- Keyway up Beige (MM) Aqua (MM) Sleeve Material: Zirconia Connectors MTP US Conec (IEC-61754-7 & EIA/TIA-604-5) Boot Colour: Black Body Sleeve Colour: MM (Beige), MM Elite (Aqua) Cassette Material Operating Temperature Storage Temperature Packaging Dimensions Weight LC (IEC 61754-20) Boot Colour: Body Colour: White (MM) Beige (MM) 16 Gauge Aluminium (15mm Thickness) with a black powder coat finish (Colour: RAL9004) -20 ~ +60 C -40 ~ +70 C 150mm x 50mm x 215mm 0.55kg MTP LC Cassette 103.5 All dimensions in mm Front 129 117 Adaptors 1-6 Keyway Up 132.5 30 Adaptors 7-12 Keyway Down Part Number Generator CASS MTP Connector Fibre Count Discrete Connector Fibre Type Polarity MTP Male (standard) MTPM 12 LC LC OM4 OM4 A/C Leave Blank MTP Male Elite MTPEM 24 SC SC Female available on request B1 B* B2 *Polarity B inks must contain 2 types of cassette Example Part Number: MTPM 24 LC OM4 CASS MTPM24LCOM4CASS will generate a 24 fibres OM4 cassette with MTP male rear and LC front interface, polarity method A or C. VISIT US ONLINE NOW WWW.FIBREFAB.COM

26 Patch Panels for use with OM4 MTP Cassette Modules 1U 3 Port Sliding Patch Panel For MTP Modules FibreFab offers an innovative, robust 1U sliding patch panel. This panel has been designed to accept up to 3 LGX Modules or MTP cassettes within a 1U space. With the ability to use a full array of adaptor types it offers a flexible solution to the end user, enabling them to incorporate a multi-functional panel which allows easy access during installation or re-work with no disturbance of the existing cable or fibres. In addition to the array of adaptors the panel also offers multiple cable entry solutions, up to 6 standard cable entry points for, loose tube, tight buffer, pre -terminated and steel tape armoured cable. 1U Chassis Scaling up to 72 Discrete Fibres Part Number: S13XXX00 Applications Data centres, premise installations, telecommunication networks Ethernet, Fibre Channel, ATM, LAN, MAN and WAN Data communication and telecommunication networks Indoor applications Features Up to 3 LGX/MTP modules in 1U Multiple Adaptor options available 24 Adaptor positions Individually labelled ports 45 open working angle Accepts loose tube, distribution and pre terminated cables ROHS, REACH SvHC and UL rated Fits standard 19 Ultra High Density 14 Slot 3U LGX Style Chassis For MTP Modules FibreFab offers an innovative, robust, high density 3U Chassis. This panel has been designed to accept up to 14 LGX style assemblies. With the ability to use a full array of adaptor types it offers a flexible solution to the end user, enabling them to incorporate a multi-functional chassis which allow easy access during installation or rework with no disturbance of the existing cable or fibres. In addition to the array of adaptors the chassis also offers multiple cable entry solutions, MTP trunk cables connected to 14 individual MTP cassettes with up to 24 fibres in each, loose tube cable connecting to 14 Individual extended cassettes to allow standard splicing or 14 LGX style modules for pre-terminated solutions, making this chassis one of the most flexible on the market. 3U Chassis Scaling up to 336 Discrete Fibres Part Number: LGXCHASSIS Applications Data centres, premise installations, telecommunication networks Ethernet, Fibre Channel, ATM, LAN, MAN and WAN Data communication and telecommunication networks Indoor applications Features Up to 14 LGX style assemblies Up to 14 x 24 fibre MTP cassettes Multiple adaptor options available Fully integrated fibre management Splicing option available Flat pack for easy shipment Patchcord exit retrofit cable management available 30mm bend radius maintained throughout Individually labelled ports Accepts loose tube, distribution cable and MTP trunk cable RoHS, REACH SvHC and UL rated Fits standard 19 Rear cable management bar as standard FOR MORE INFORMATION CALL +44 (0)870 127 3330

27 Patch Panels Technical Specifications Element 1U 3 Port Panel 3U 14 Port Panel U Size 1U (44.4mm) 3U (133.2mm) Width 482mm 480mm Depth 205mm 335mm Net weight 2.5 kgs 2.76 kgs Packaged weight 3 kgs 3.24 kgs Packaged dimensions 450mm W X 55mm H x 260mm D 490mm W x 110mm H X 240mm D IP rating IP20 N/A Suitable for Adaptor type LGX / MTP LGX / MTP Cassettes Number of ports 3 14 Cable entry 20mm 6 - Mounting adjustment range 50mm 64mm Material Cold-rolled steel Cold- rolled steel Material thickness 1.2mm 1.5mm Material coating Powder coating Powder coating Colour RAL 9004 RAL 9004 Operating temperature -40 c to +50 c -40 c to +50 c Designed in accordance with TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304, IEC61754,EN297-1 TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304, IEC61754,EN297-1 Compliant to RoHS, Reach/SVHC RoHS, Reach/SVHC Ordering Information Description 1U 3 Port Modular Patch Panel for use with OM4 MTP Cassette Modules 3U 14 Port Modular Patch Panel for use with OM4 MTP Cassette Modules Adaptor Plates Part Number S13XXX00 LGXCHASSIS MTP to MTP L06 LC Multimode Quad L03 8 adaptor L06MTP08 6 adaptor L03LQM06/CAS LC Multimode Duplex 8 adaptor l01 L01LCM08/CAS SC Multimode Duplex L03 6 adaptor L03SCM06/CAS LGX Style Splice Cassette also available Suitable for use with 3U Chassis only VISIT US ONLINE NOW WWW.FIBREFAB.COM

28 OM4 High Density MTP Slimline Panel 96 fibres 483 439 483 483 439 439 44 44 4 x 20 Knockout 44 Scaling up to 48 Fibres Scaling up to 96 Fibres 143 4 x 20 Knockout Description 143 143 4 x 20 Knockout FibreFab MTP Slimline Panels provide secure transitions between MTP and LC or SC discrete connector interfaces. They are used to interface MTP backbones with LC or SC patching and active equipment connection. The pre-populated panel allows rapid deployment of high density data centre infrastructure as well as improved trouble shooting and reconfiguration during moves, adds and changes. The shallow depth of the Slimline Panel makes it suitable for copper racking systems. Scaling up to 96 fibres panel is available for server rack in data centre environment. MTP Slimline Panels contain factory controlled and tested MTP -LC fan-outs to deliver optical performance and reliability. Low loss MTP Elite and LC Premium versions are offered featuring improved low insertion losses for demanding low power budget high speed networks. Benefits Rapid Deployment - factory terminated modular system saves installation and reconfiguration time during moves, adds and changes Easy Installation - open rear entry MTP ports guarantee easy cabling access and facilitate connection to MTP backbone trunks system Compact 1U Size - short depth make panel compatible with low dimension copper racking system MTP Interface - MTP US Conec brand components feature superior optical and mechanical properties Optimised Performance - low loss MTP Elite, discrete Premium connectors and OM4 fibre assures low insertion losses and power penalties in tight power budget high speed network environment. High Density - 1U panel can scale up to 96 discrete LC connectors and up to 8 MTP rear interfaces Reliability - 100% Tested. A combination of high quality components and FibreFab manufacturing quality control guarantees product of the highest standards Features OM4 Fibre Grades (OS1/2, OM1, OM2 and OM3 available) Up to 8 MTP (US Conec) brand MPO standard compliant multifibre connector rear entry ports Front LC (SFF Data Centre standard), SC discrete interface Up to 48 (LC DX) or 96 (LC Quad) fibres panel capacity Factory terminated and tested Applications Data Centre Infrastructure Storage Area Network- Fibre Channel Parallel Optics Infiniband Emerging 40 and 100Gbps Protocols FOR MORE INFORMATION CALL +44 (0)870 127 3330

29 OM4 High Density MTP Slimline Panel Technical information Connector Performance Connector mating Il average Il max MTP Elite (MM) 0.10dB 0.35dB MTP (MM) 0.20dB 0.60dB LC, SC Premium (MM) 0.08dB 0.15dB LC, SC (MM) 0.15dB 0.30dB *Premium grade LC and/or SC performance is provided when MTP Elite is selected. Technical Specification Element Characteristics Fibre OM4 (ISO/IEC 60793) Adaptors MTP US Conec (IEC-61754 &EIA/TIA-604-5) LC Duplex (IEC 61754-20) Body Colour: Body Colour: Black Polarity A/C: Keyway up- Keyway-down Grey: Polarity B Keyway up- Keyway up Beige (MM) Aqua (MM) Sleeve Material: Zirconia Connectors MTP US Conec (IEC-61754-7 & EIA/TIA-604-5) Boot Colour: Black Body Sleeve Colour: MM (Beige), MM Elite (Aqua) Operating Temperature Storage Temperature LC (IEC 61754-20) -20 ~ +60 C -40 ~ +70 C Boot Colour: Body Colour: White (MM) Beige (MM) Part Number Generator for Slimline Panel SL Front Connector LC SC LC SC Rear MTP Connector MTP Male standard (12 fibres) MTP Male (24 fibres) Fibre type Fibre count MM OM4 4 12 60 M2M 24 72 36 84 48 96 Example Part Number: SL LC MM 4 48 SLLCMM448 will generate a MTP slimline panel with 48 OM4 fibres and LC front interface. VISIT US ONLINE NOW WWW.FIBREFAB.COM

30 OM4 Ultra High Density 1U Modular Patch Panel 120 fibres Description FibreFab offers an innovative, high density patch panel. Designed to accommodate up to 120 connections within a 1U panel. These are split between 5 individual modules with up to 24 fibres within each. Each module accepts incoming fibre from either MTP trunk cables or via pre-terminated assemblies. Pre-terminated cables are available as either ruggedised breakout cable or distribution cable. Another alternative for cable entry is the patented FibreFab FirstLight Prime breakout, capable of being pulled over long distances and connecting directly to equipment. Incoming cable can also be supplied un-terminated for splicing within a standard patch panel. Modules can enter the panel from the front or the rear. Each is supplied with a separate labelling card for ease of channel identification. Cable entry is managed via a retrofit management bar allowing entry from either the left or the right hand side. Exiting patchcords are managed by a retrofit bracket allowing cables to be routed in any direction. Also available is a 3U system incorporating all of the above but with the addition of a removable door allowing complete access to all relevant components. Second to this FibreFab is pleased to offer a 0U solution designed to accommodate sufficient MTP connectivity to support an individual blade per module. This is managed via a 96 fibre trunk cable directly terminated to 8 MTP connectors within the module and the choice of MTP or discrete connectors at the opposing end. Module can pass through the panel in both directions Features Modular Connection System High Density- scaling up to 120 discrete connectors and up to 720 fibres within MTP interface Up to 24 discrete or 120 (MTP ) fibres connections a single module Cable entry via either MTP connection or pre-terminated assemblies Pre-loaded in the factory to guarantee performance Can be supplied with pre-terminated pigtails for splicing on the opposite end Can be supplied with a module at one end and ruggedised tails for direct connection to equipment at the opposing end Can be supplied with a module at one end and 900µm tails for connection within a standard patch panel at the opposing end 5 individual modules per panel Module entry from front or rear Rear cable management Retrofit patchcord exit management Separate labelling cards ROHS, REACH SvHC and UL rated Fits standard 19 or ETSI rack Applications Data centres, premise installations, telecommunication networks Ethernet, Fibre Channel, ATM, LAN, MAN and WAN Data communication networks Indoor applications FOR MORE INFORMATION CALL +44 (0)870 127 3330

31 OM4 Ultra High Density 1U Modular Patch Panel Technical information Technical Specification Parametre Measurement Conformance Dimensions (Nominal) Weight 482 x 311 x 44mm (recessed) 3.0kg Operating Temperature -25 to +70, 12 cycles IEC 61300-2-22 480 40 271 Standard Recessed 482 465 Ordering Information Description High Density Modular Panel (unloaded) Part Number HD1UCHASSIS VISIT US ONLINE NOW WWW.FIBREFAB.COM

32 OM4 Ultra High Density MTP Pluggable Modules Pluggable Module Options 80 80 6 x LC Quad 6 x LC Connections Quad Connections 6 x MTP 6 Connections x MTP Connections Disconnectable Pluggable Module Version 172 38.50 38.50 80 MTP Connection 6 x SC Duplex 6 x SC Connections Duplex Connections 12 x SC Simplex 12 x SC Connections Simplex Connections 6 x LC Duplex 6 x LC Connections Duplex Connections 12 x MTP 12 Connections x MTP Connections 172 80 8 x MTP 8 Connections x MTP Connections Compression gland entry point Disconnectable Pluggable Module Options MTP Connection MTP Connection MTP Trunk Part Number Generator Compression Gland Connection Compression Gland Connection HD MTP Connector Fibre Count Discrete Connector Fibre Type Polarity MTP Male (standard) MM 12 LC LC OM4 OM4 A/C Leave Blank MTP Male Elite MEM 24 SC SC Female available on request B B1 B2 Example Part Number: FOR MORE INFORMATION CALL +44 (0)870 127 3330 MM 24 LC OM4 HD MM24LCOM4HD will generate a 24 fibre OM4 High Density cassette with MTP male rear and LC front interface, polarity method A or C.

33 OM4 Ultra High Density Modular Multifibre Assembly Pre-terminated Pluggable Module Version 172 MTP Connection Gland MTP Connection 80 MTP Trunk Cable Strength Member Pre-terminated Pluggable Modules Compression Gland Connection Compression Gland Connection MTP Connection MTP Connection MTP Trunk OR Compression Gland Connection Compression Gland Connection Tight Buffer - 900µm Tails Loose Tube - Ruggedised 2mm Tails Breakout - 2mm Ruggedised Tails Microcable - MTP Ruggedised Tails Product Configurator HDMA Fibre Count End A Module Interface END B Style END B Interface Fibre Type Cable Construction Assembly Length (mtr) Assembly Type 24 LC Module LC OM4 Tight Buffer 1 to 200m Standard Up to 144 MTP SC 900µm Tails SC Breakout Premium/Elite MTP Male 2mm Tails MTP Micro cable MTP Female Loose Tube VISIT US ONLINE NOW WWW.FIBREFAB.COM

34 OM4 SC Adaptors FibreFab offers a range of high quality SC adaptors which have high precision alignment sleeves for reliability and improved reconnectability. For singlemode applications a ceramic sleeve is supplied to ensure a high precision alignment. For multimode applications a phosphor bronze sleeve is supplied. The housing is available in different colours with options for flange or flangeless body, metal clips or inbuilt clips Features Complies with IEC 61754-4 and IEC 60874-14 standards High precision alignment sleeve Low insertion loss and improved reconnectability RoHS, REACH SvHC compliant Available in simplex and duplex adaptors SC simplex adaptors are available with a shutter (see page 8 for details) Applications Data centres, premise installations, telecommunication networks Ethernet, fibre channel, ATM, LAN, MAN and WAN Flangeless Available Technical Specification Ceramic Phosphor Bronze Conformance Insertion Loss (Typ) 0.1 db 0.15 db IEC 61300-3-4 Mating Durability - 500 IEC 61300-2-2 Receptacle Retention force - 2N - 5.9N IEC 61754-4 Operating temperature - -25 to +70, 12 cycles IEC 61300-2-22 Ordering Information Mode Type Colour Part No. Simplex Duplex MM PC BEIGE SCUSPHBRBEIGE SCUDPHBRBEIGE MM PC AQUA SCSMPXAQUA SCDPXAQUA MM PC ERIKA VIOLET Contact Sales For Details Note: For Flangeless add /FL to the part number FOR MORE INFORMATION CALL +44 (0)870 127 3330

35 OM4 LC Adaptors FibreFab offers a range of quality LC adaptors which have high precision alignment sleeves for improved reliability and better reconnectability. Both singlemode and multimode adaptors are supplied with high precision ceramic sleeves. The housing is available in different colours with options for flange or flangeless body and metal, or inbuilt, clips. Features Complies with IEC 61754-20 High precision alignment sleeve Low insertion loss and high reconnectability RoHS, REACH SvHC compliant Available in simplex, duplex and quad adaptors Applications Telecommunications networks CATV, LAN, MAN and WAN application Data processing networks Cable television Fibre-to-the-home Premises distribution Flangeless Available Technical Specification Ceramic Phosphor Bronze Conformance Insertion Loss (Typ) 0.1 db 0.15 db IEC 61300-3-4 Mating Durability 500 IEC 61300-2-2 Receptacle Retention force 1N - 2.5N IEC 61754-20 Operating temperature -25 to +70, 12 cycles IEC 61300-2-22 Ordering Information Mode Type Colour Part No. Duplex Quad Configuration SM PC AQUA LCDPXAQUA/S LCQUADAQUA-W Flange with two MM PC BEIGE LCDPXBEIGE LCQUADBEIGE-S holes and SC footprint with metal MM PC ERIKA VIOLET Contact Sales For Details clips VISIT US ONLINE NOW WWW.FIBREFAB.COM

Other catalogues available for download at http://www.fibrefab.com/downloads.php FibreFab Group and UK Headquarters UK Manufacturing Plant FibreFab Limited Davy Avenue, Knowlhill, Milton Keynes, MK5 8ND, United Kingdom. Tel: +44 (0) 870 127 3330 Fax: +44 (0) 870 127 3331 E-mail: sales@fibrefab.com www.fibrefab.com FibreFab Limited Boundary Road, Haverhill Suffolk, CB9 7YH, United Kingdom. Tel: +44 (0) 870 127 3330 Fax: +44 (0) 870 127 3331 E-mail: sales@fibrefab.com www.fibrefab.com Dubai United States of America China Fibrefab General Trading LLC Main Office 1601, Room 1602 48 Burj Gate, Sheik Zayed Road PO Box 378978 Dubai United Arab Emirates Tel: +971 4 404 9606 Fax: +971 4 404 9607 Email: mea@fibrefab.com www.fibrefab.com FiberFab Inc. 1589 Sulphur Spring Road, Suite 111-112, Baltimore, MD 21227, USA. Tel: +1 410 242 9026 Fax: +1 410 242 7747 E-mail: sales@fiberfabinc.com www.fiberfabinc.com FibreFab Asia & Pacific No.2708, Hanggang Fuchun Building. 6031 ShenNan Middle Road. Futian District. ShenZhen City, China. Tel: +86 755 2561 3694 Fax: +86 755 2561 3697 E-mail: sales@fibrefab.com www.fibrefab.com Revision 1.3 FibreFab 2011 All Rights Reserved E&OE FFABOM4CAT MTP is a registered trademark of US Conec Ltd