db MISER ULTRA LOW LOSS ASSEMBLIES Are you a design or test engineer fighting a challenging loss budget? Consider db Miser ultra low loss cable assemblies. High performance materials, careful attention to design detail, and stringent process control yields: n Ultra low insertion loss over the specified frequency range n Excellent amplitude stability with flexure n Stable performance over operating temperature range n Increased shielding effectiveness n Greater connector retention db Miser 300 0.20 db/ft nom @ db Miser 2 0.367 db/ft nom @ 26. GHz db Miser 190 0.496 db/ft nom @ 32 GHz db Miser 160 0.678 db/ft nom @ 40 GHz db/0' BULK ATTENUATION (db/0') 70 6 60 0 4 40 3 30 2 20 1 0 Cable Attenuation d B M i s e r 3 0 0 d B M i s e r 2 1 0 0 1 20 2 30 3 40 FREQUENCY (GHz) d B M i s e r 1 9 0 d B M i s e r 1 6 0 Nominal High value microwave and electronic interconnect solutions www.teledynestorm.com
FACTORY FORMED RIGHT-ANGLE (FFRA) S 1.2" Designed using straight connectors and a shrink tubing strain relief combination, FFRA connectors offer a moderate right-angle space advantage at a significant cost savings over traditional right-angle connectors. FFRA connectors are available for all db Miser cable sizes. See the Connector tables for specific connectors available as FFRAs. Note: The dimensions given here are for dbm160 with an SMK connector. Larger cables will have proportionally larger dimensions. Contact Storm for specifics. 2.2" MAX db MISER CONSTRUCTION A B C D E A Silver-plated copper center conductor B Expanded PTFE dielectric C Helically wrapped SPC flat wire shield D Silver-plated copper braid E Extruded blue FEP jacket 630.74.3300 n www.teledynestorm.com
db MISER db MISER SPECIFICATIONS 160 190 2 300 Cable Designator 84 83 82 81 Diameter (in/mm) 0.160/4.06 0.190/4.83 0.2/.33 0.299 / 7.9 Operating Frequency (Max, GHz) 40 32 26. 18 Attenuation Max @ 2 GHz (db/ft) 0. 0.121 0.099 0.067 Attenuation Max @ GHz (db/ft) 0.347 0.282 0.232 0.19 Attenuation Max @ (db/ft) 0.474 0.388 0.320 0.221 Attenuation Max @ 26. GHz (db/ft) 0.8 0.481 0.396 Attenuation Max @ 32 GHz (db/ft) 0.648 0.3 -- -- Attenuation Max @ 40 GHz (db/ft) 0.732 -- Power Handling -- Avg Power in Watts @ 1 GHz 27 79 878 161 Phase Stability vs. Flexure (@, nom) ±3. ±4 ±4. ±8 Shielding Effectiveness Min (db @ 1 GHz) > 90 > 90 > 90 > 90 Typical VSWR (2 straight connectors) 1.28 to 40 GHz 1.2 to 32 GHz 1.22 to 26. GHz 1.22 to Min Bend Radius (in/mm) Static 0.7/19.1 Dynamic 1./38.2 0.9/24.1 1.9/48.3 1.0/2.4 2.0/0.8 1./38.1 3.0/76.2 Connector Retention to, pull (lbs/kg) 20/9.07 40/18.14 0/22.68 7/34.02 Velocity of Propagation (%) 87.0 82.4 84.0 84.6 Weight (grams/ft & /m) 12.12/39.76 16.6/4.63 19.40/63.6 39.00/127.9 Operating Temperature Range ( C) to +12 to +12 to +12 to +12 ± 360 degree bends around a 3" mandrel (dbm 160), 3.8" mandrel (dbm 190), Subject to connector choice. 4" mandrel (dbm 2) and 6" mandrel (dbm 300) Specifications subject to change without notice.,000 9 8 7 6 4 3 db MISER CW POWER SEA LEVEL AND 2 C AVERAGE POWER - WATTS 00 0 2 9 8 7 6 4 3 2 9 8 7 6 4 3 db MISER 300 0.299" db MISER 2 0.2" db MISER 190 0.190" db MISER 160 0.160" 20 2 0.1 6 7 8 9 0.2 0.3 0.4 0. 0.6 0.7 0.8 0.9 1.0 2 3 4 20 30 40 0.1 1.0 40 FREQUENCY (GHz) 630.74.3300 n www.teledynestorm.com
db MISER ORDERING INFORMATION: Part Number Designation db MISER 160 PART NUMBER 84 Armoring Designator 0 - Unarmored A - Hard Armored (polyolefin jacket) AN - Hard Armored (no polyolefin jacket) OPERATING FREQUENCY 40 GHz 2.4 mm SP CODES 2.4 mm SMK (2.92 mm ) SMK (2.92 mm ) SP 40 GHz SMK (2.92 mm ) SP 00 0 006 06 SMK (2.92 mm ) 0 06 6 2.4 mm SP 006 06 0606 066 2.4 mm 06 6 066 66 IEEE Standard 287 084-00-048 = Unarmored db Miser 160, SMK (2.92 mm) SP to SMK (2.92 mm) SP (assembly operates to 40 GHz), 48 inches AN84-0606-180 = Hard Armored (no polyolefin jacket) db Miser 160, 2.4 mm SP to 2.4 mm SP (assembly operates to 40 GHz), 180 inches db MISER 190 PART NUMBER 83 Armoring Designator 0 - Unarmored A - Hard Armored (polyolefin jacket) AN - Hard Armored (no polyolefin jacket) OPERATING FREQUENCY 32 GHz CODES 2.92 mm 2.92 mm SP 32 GHz 2.92 mm SP 00 0 2.92 mm 0 083--048 = Unarmored db Miser 190, 2.92 mm to 2.92 mm (assembly operates to 32 GHz), 48 inches A83-00-180 = Hard Armored (polyolefin jacket) db Miser 190, 2.92 mm SP to 2.92 mm SP (assembly operates to 32 GHz), 180 inches 630.74.3300 n www.teledynestorm.com
db MISER ORDERING INFORMATION: Part Number Designation db MISER 2 PART NUMBER 82 Armoring Designator 0 - Unarmored R - Ruggedized (polyurethane jacket) A - Hard Armored (polyolefin jacket) AN - Hard Armored (no polyolefin jacket) Hard armoring with FFRA connectors is a custom part number; call Storm. 26. GHz 26. GHz 3. mm SP 3. mm OPERATING FREQUENCY SMA SP SMA SP TNC SP 3. mm SP 0404 044 0441 04 0421 041 0204 042 0304 043 3. mm 044 44 414 014 214 14 024 24 034 34 SMA SP 0441 414 4141 0141 2141 411 0241 412 0341 413 SMA SP 04 014 0141 01 0121 011 02 012 03 013 SMA RAP 0421 214 2141 0121 2121 211 0221 212 0321 213 SMA 041 14 411 011 211 11 021 12 031 13 TNC SP 0204 024 0241 02 0221 021 0202 022 0203 023 TNC 042 24 412 012 212 12 022 22 032 23 N SP 0304 034 0341 03 0321 031 0203 032 0303 033 N 043 34 413 013 213 13 023 23 033 33 SMA RAP SMA TNC N SP N CODES RAP 082-0404-048 = Unarmored db Miser 2, 3. mm SP to 3. mm SP (assembly operates to 26. GHz), 48 inches R82-4141-120 = Ruggedized db Miser 2, SMA SP to SMA SP (assembly operates to 26. GHz), 120 inches db MISER 300 PART NUMBER 81 Armoring Designator 0 - Unarmored A - Hard Armored (polyolefin jacket) AN - Hard Armored (no polyolefin jacket) SMA SP OPERATING FREQUENCY SMA TNC SP TNC N SMA SP 01 011 02 012 03 013 SMA 011 11 021 12 031 13 TNC SP 02 021 0202 022 0203 023 TNC 012 12 022 22 032 23 N SP 03 031 0203 032 0303 033 N 013 13 023 23 033 33 N SP CODES 081-0303-036 = Unarmored db Miser 300, N SP to N SP (assembly operates to ), 36 inches AN81-01-8 = Hard Armored (no polyolefin jacket) db Miser 300, SMA SP to SMA SP (assembly operates to ), 8 inches 630.74.3300 n www.teledynestorm.com
& RUGGEDIZING OPTIONS The Hard Armored option (with and without polyolefin jacket) is available for all db Miser cables. However, when specifying connectors, custom part numbering must be used. Call Storm for details. The Ruggedized option (with polyurethane jacket) is available only for db Miser 2 cable, but not with connectors. HARD ARMORED Polyolefin jacket Armoring Designator: A Designed for both inside and outside environments where flexibility and weight are not as critical, but where the application requires the ultimate in cut and crush resistance (00 lbs/in). The cable is covered with a stainless steel interlocked armor and a cross-linked polyolefin jacket. Temperature: 4 C thru +12 C Diameter: db Miser 160 0.300"/7.62 mm db Miser 190 0.430"/.92 mm db Miser 2 0.430"/.92 mm db Miser 300 0.2"/13.34 mm HARD ARMORED No polyolefin jacket Armoring Designator: AN Designed for both inside and outside environments where flexibility and weight are not as critical, but where the application requires the ultimate in cut and crush resistance (00 lbs/in). The cable is covered with a stainless steel interlocked armor. Temperature: 4 C thru +12 C Diameter: db Miser 160 0.26"/6.73 mm db Miser 190 0.39"/.03 mm db Miser 2 0.39"/.03 mm db Miser 300 0.47"/12.07 mm RUGGEDIZED Polyurethane jacket Armoring Designator: R For applications similar to the above, where weight, flexibility, and moderate compression resistance (300 lbs/in) are important, but where abrasion resistance is also critical. The cable is covered with a flexible wound helix of passivated stainless steel wire and an extruded polyurethane jacket. Temperature: 4 C thru +0 C Diameter: db Miser 2 0.360"/9.14 mm 221 Werch Drive Woodridge, Illinois 6017 Tel 630.74.3300 Fax 630.74.300 Toll Free 888.347.8676 storm_microwave@teledyne.com www.teledynestorm.com AS90/ISO 9001 REGISTERED 09/14