Energy Saving ECM s and Fans 2010 Ventilation Catalogue
CONTENTS For ellington, sustainability is about delivering products at competitive prices while preserving the environment for future generations. e look forward to working with you on reducing your products energy consumption while cutting costs. Saving Generation for the Next Generation All motor and electronics designs shown are copyright of ellington Drive Technologies Ltd. Designs may be based on techniques protected by patents owned by ellington Drive Technologies Ltd or be the subject of patent applications by ellington Drive Technologies Ltd. Trademarks are (as applicable) TM and of ellington Drive Technologies Ltd. ellington Drive Technologies Ltd reserves the right to alter specifications without notice. 2
Contents ellington Ventilation s and Fans Benefits and Specifications............... 2-3 CONTENTS ized Fans Forward Curved - Single Inlet............ 4-11 Forward Curved - Double Inlet.......... 12-17 Backward Curved..................... 18-29 Axial................................ 30-33 External Rotor s s.............................. 34-38 External Electronic Controls Controls............................. 39-42 Contacts Company Offices..........................45.DTL.COM 1
Benefits and Specifications ellington Ventilation s and Fans Benefits and Specifications Product Description All ellington ventilation motors are external rotor electronically commutated (ECM) products, with external electronic control. The motors are energy saving replacements of PSC induction motors used in domestic, commercial and industrial ventilation applications. Applications Heat recovery units Controlled home ventilation Fan filter units for clean rooms Commercial and industrial ventilation Energy Savings ellington ECM ventilation motors are up to two times more efficient than PSC induction motors and yield high direct energy savings. ellington DF motors efficiency rate: over 80% PSC induction motors efficiency rate: ~ 40% High energy savings mean very short payback periods. In most applications,ellington motor fans payback period is shorter than one year. ith high efficiency ratings, our motors and fans meet energy efficiency standards set by new environmental legislation. DF 102 Efficiency is determined by the electronic control. In induction motors instead, where the speed is determined by the frequency of the electric current, efficiency levels decline sharply whenever the motors are operating at less than full load. Additional Benefits Reliability Because of their high efficiency, ellington motors operating temperature is very low. Cool operation, long life ball bearings and electronic control safety features contribute to the motors longer design life and higher reliability. Save on maintenance and service. Quiet Operation Virtually noiseless commutation and no cogging motor design mean that ellington ECM motors eliminate the noise and vibration typical of induction motors and deliver extremely quiet ventilation. Materials Our motors are built using advanced engineering polymers and less copper and steel than other motors for a greener, more affordable electronically commutated (ECM) motor. ellington DD motors stator and bobbins are built using advanced engineering polymers Additional Control Functions Low cost microprocessor with smart software adds a lot of functionality to our ECM motors and fans, and adds value to your ventilation application. Unique ECM control functions include: ellinton s ECM motors maintain high efficiency levels across a wide speed range because motor speed Continuously variable speed control: achieved via PM (pulse width modulation) or 0-10V control signal to the motor. 2
Constant pressure, airflow, temperature: electronic control monitors parameters in real time and adjusts motor speed to maintain the pre-set duty points. CO 2 monitoring: motor speed is adjusted in real time to limit carbon dioxide levels in the ventilated space. Serial communication: connect to laptop to set functions with a user friendly interface. Compact The external rotor design of ellington ECM motors allows maximum integration of motor and impeller for a very compact motorized fan. Reduce the size of your unit with our energy and space efficient fans. Design Life 45,000 hrs motor design life at +20 C (68 F). Balancing All our motors and fans are dynamically balanced, which reduces the load on the bearings. Power Supply ellington s motors and fans can be operated directly from AC mains supply, or from DC. Electronic Control Safety Features The electronic controls of ellington s DD series motors are provided with the following safety features for longer motor life and improved reliability. Locked rotor/stall detection and over current protection switch the motor to standby mode and restart it after 40 mseconds if motor fails to start, if speed is forced outside the preset range or if motor current is twice the nominal value. This software detection protects the motor with a timed algorithm to limit maximum winding temperature. Thermal protection permanently stops the motor if overtemperature occurs. Software protects the motor from most external conditions that could trigger overtemperature. Direction of Rotation Direction of rotation can be either C SE (standard) or CC SE (upon request) as seen when facing the motors from Shaft End. Voltage Range 230V ± 10% for DD motor series. 230V-277V ± 10% for DF motor series. Benefits and Specifications 168 mm (6.6 inches) 52 mm (2 inches) Protection Class Class I ellington ECM external rotor fan is 1/3 the width of an equivalent induction fan* Specifications Bearings ellington s ventilation motors are equipped with long life ball bearings and can be mounted in any position. Bearing design life L10 is minimum 40,000 hrs at +60 C (140 F) ambient temperature. For a customized design life calculation, please contact us at info@wdtl.com. Operating Temperature -25 C to +40 C (-13 F to 104 F). s de-rating allows them to operate up to +60 C (140 F). Different operating temperature ranges are available upon request. Insulation Class Class F for DD motor series. Class A for DF motor series. Compliance EN60335, EN61000 and EN55014. * ellington fan type FA 300 D. Induction fan is of equivalent power rating and fan blade Ø 300 mm (12 inches)..dtl.com 3
ized FANS Forward Curved Fan Ø 140 mm (5 1/2 inches) FT 140 D DD 025 AA 370 1560 65 0 FT 140 C DD 050 AA 460 2090 100 0 FT 140 B DD 070 AA 590 2280 160 0 Impeller Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D* E PCD mm 60 500 42 6.2 140 58 inches 2.36 19.68 1.65 0.24 5.51 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) motor speed, fans can 4
Forward Curved Centrifugal Blower ized FANS FS 140 D DD 025 AA 365 1560 65 0 FS 140 C DD 050 AA 460 2090 100 0 Impeller Material: Galvanized Sheet Steel (Aluminium on request) Scroll Housing Material: Steel, powder-coated Dimensions A B C D E F G* H I* K L M N O mm 117 124 105 130 115 98 500 42 6.2 260 139 98 226 103 inches 4.61 4.88 4.13 5.12 4.53 3.86 19.68 1.65 0.24 10.24 5.47 3.86 8.90 4.06 Cable Tolerance: G* ±20 mm (±0.79 inches) I* ±0.8 mm (±0.03 inches) motor speed, blowers can.dtl.com 5
ized FANS Forward Curved Fan Ø 160 mm (6 1/2 inches) FT 160 D DD 025 AA 390 1160 60 0 FT 160 C DD 050 AA 480 1520 75 0 FT 160 B DD 070 AA 610 1920 165 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D* E PCD mm 62 500 42 6.2 160 58 inches 2.44 19.68 1.65 0.24 6.30 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) motor speed, fans can 6
Forward Curved Centrifugal Blower ized FANS FS 160 D DD 025 AA 370 1080 60 0 FS 160 C DD 050 AA 460 1480 80 0 FS 160 B DD 070 AA 580 2000 170 0 Impeller Material: Galvanized Sheet Steel (Aluminium on request) Scroll Housing Material: Steel, powder-coated Dimensions A B C D E F G* H I* K L M N O mm 117 124 105 130 115 98 500 42 6.2 260 139 98 226 103 inches 4.61 4.88 4.13 5.12 4.53 3.86 19.68 1.65 0.24 10.24 5.47 3.86 8.90 4.06 Cable Tolerance: G* ±20 mm (±0.79 inches) I* ±0.8 mm (±0.03 inches) motor speed, blowers can.dtl.com 7
ized FANS Forward Curved Fan Ø 180 mm (7 inches) FT 180 B DD 070 AA 590 1620 140 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D* E PCD mm 74 500 42 6.2 180 58 inches 2.91 19.68 1.65 0.24 7.09 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) Curve shown is limit. By adjusting the motor speed, fan can 8
Forward Curved Fan Ø 180 mm (7 inches) ized FANS FT 180 E DF 102 AA 1390 1465 250 45 FT 180 F DF 102 BA 1065 1175 115 50 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D PCD mm 92 600 20 180 90 inches 3.62 23.62 0.79 7.09 3.54 Cable Tolerance: B* ±10 mm (±0.39 inches) motor speed, fans can.dtl.com 9
ized FANS Forward Curved Fan Ø 200 mm (8 inches) FT 200 E DF 102 AA 1450 1290 225 140 FT 200 F DF 102 BA 1110 990 100 80 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D PCD mm 102 600 20 200 90 inches 4.02 23.62 0.79 7.87 3.54 Cable Tolerance: B* ±10 mm (±0.39 inches) motor speed, fans can 10
Forward Curved Fan Ø 225 mm (8 3/4 inches) ized FANS FT 225 E DF 102 AA 1505 1010 175 120 FT 225 F DF 102 BA 1165 785 80 70 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D PCD mm 102 600 20 225 90 inches 4.02 23.62 0.79 8.86 3.54 Cable Tolerance: B* ±10 mm (±0.39 inches) motor speed, fans can.dtl.com 11
ized FANS Forward Curved Fan Ø 133 mm (5 1/4 inches) FG 133 D DD 025 AA 630 1000 55 0 FG 133 C DD 050 AA 765 1220 70 0 FG 133 B DD 070 AA 965 1520 125 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D* E PCD mm 191 500 42 6.2 133 58 inches 7.52 19.68 1.65 0.24 5.24 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) motor speed, fans can 12
Forward Curved Fan Ø 146 mm (5 3/4 inches) ized FANS FG 146 C DD 050 AA 650 860 50 0 FG 146 B DD 070 AA 800 1120 95 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D* E PCD mm 180 500 42 6.2 146 58 inches 7.09 19.68 1.65 0.24 5.75 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) motor speed, fans can.dtl.com 13
ized FANS Forward Curved Fan Ø 160 mm (6 1/2 inches) FG 160 B DD 070 AA 870 1120 110 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D* E PCD mm 161 500 42 6.2 160 58 inches 6.34 19.68 1.65 0.24 6.30 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) Curve shown is limit. By adjusting the motor speed, fan can 14
Forward Curved Fan Ø 180 mm (7 inches) ized FANS FG 180 E DF 102 AA 1975 1130 195 75 FG 180 F DF 102 BA 1520 870 90 45 Material: Galvanized Sheet Steel (Aluminum on request) Dimensions A B* C D PCD mm 186 600 20 180 90 inches 7.32 23.62 0.79 7.09 3.54 Cable Tolerance: B* ±10 mm (±0.39 inches) motor speed, fans can.dtl.com 15
ized FANS Forward Curved Fan Ø 200 mm (8 inches) FG 200 E DF 102 AA 2045 890 155 90 FG 200 F DF 102 BA 1595 695 75 55 Material: Galvanized Sheet Steel (Aluminum on request) Dimensions A B* C D PCD mm 206 600 20 200 90 inches 8.11 23.62 0.79 7.87 3.54 Cable Tolerance: B* ±10 mm (±0.39 inches) motor speed, fans can 16
Forward Curved Fan Ø 225 mm (8 3/4 inches) ized FANS FG 225 E DF 102 AA 2175 665 115 60 FG 225 F DF 102 BA 1690 520 55 40 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B* C D PCD mm 230 600 20 225 90 inches 9.06 23.62 0.79 8.86 3.54 Cable Tolerance: B* ±10 mm (±0.39 inches) motor speed, fans can.dtl.com 17
ized FANS Backward Curved Centrifugal Fan Ø 190 mm (7 1/2 inches) FB 190 D DD 025 AA 660 2910 85 0 FB 190 C DD 050 AA 760 3240 105 0 Material: Plastic Dimensions A B C D* E F* G PCD mm 135 62 44 500 42 6.2 190 58 inches 5.31 2.44 1.73 19.68 1.65 0.24 7.48 2.28 Cable Tolerance: D* ±20 mm (±0.79 inches) F* ±0.8 mm (±0.03 inches) motor speed, fans can 18
Backward Curved Centrifugal Fan Ø 220 mm (8 1/2 inches) ized FANS FB 220 D DD 025 AA 840 2250 85 0 FB 220 C DD 050 AA 980 2810 130 0 FB 220 B DD 070 AA 1140 3140 170 0 Material: Plastic Dimensions A B C D* E F* G PCD mm 165 64 49 500 42 6.2 220 58 inches 6.50 2.52 1.93 19.68 1.65 0.24 8.66 2.28 Cable Tolerance: D* ±20 mm (±0.79 inches) F* ±0.8 mm (±0.03 inches) motor speed, fans can.dtl.com 19
ized FANS Backward Curved Centrifugal Fan Ø 225 mm (8 3/4 inches) FB 225 C DD 050 AA 950 1960 95 0 FB 225 B DD 070 AA 1190 2700 210 0 Material: Plastic Dimensions A B C D* E F* G PCD mm 157 89 68 500 42 6.2 225 58 inches 6.18 3.50 2.68 19.68 1.65 0.24 8.86 2.28 Cable Tolerance: D* ±20 mm (±0.79 inches) F* ±0.8 mm (±0.03 inches) motor speed, fans can 20
Backward Curved Centrifugal Fan Ø 250 mm (9 3/4 inches) ized FANS FB 250 B DD 070 AA 1420 2250 185 0 Material: Plastic Dimensions A B C D* E F* G PCD mm 177 87 62 500 42 6.2 250 58 inches 6.97 3.43 2.44 19.68 1.65 0.24 9.84 2.28 Cable Tolerance: D* ±20 mm (±0.79 inches) F* ±0.8 mm (±0.03 inches) Curve shown is limit. By adjusting the motor speed, fan can.dtl.com 21
ized FANS Backward Curved Centrifugal Fan Ø 280 mm (11 inches) FB 280 B DD 070 AA 1600 2070 170 0 Material: Plastic Dimensions A B C D* E F* G PCD mm 195 85 60 500 42 6.2 280 58 inches 7.68 3.35 2.36 19.68 1.65 0.24 11.02 2.28 Cable Tolerance: D* ±20 mm (±0.79 inches) F* ±0.8 mm (±0.03 inches) Curve shown is limit. By adjusting the motor speed, fan can 22
Backward Curved Centrifugal Fan Ø 225 mm (8 3/4 inches) ized FANS FB 225 C DD 050 AA 1330 2820 130 0 FB 225 B DD 070 AA 1500 3220 210 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B C D* E F* G PCD mm 153 88 63 500 42 6.2 225 58 inches 6.02 3.46 2.48 19.68 1.65 0.24 8.86 2.28 Cable Tolerance: D* ±20 mm (±0.79 inches) F* ±0.8 mm (±0.03 inches) motor speed, fans can.dtl.com 23
ized FANS Backward Curved Centrifugal Fan Ø 250 mm (9 3/4 inches) FB 250 B DD 070 AA 1770 2700 200 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B C D* E F* G PCD mm 172 100 71 500 42 6.2 250 58 inches 6.77 3.94 2.80 19.68 1.65 0.24 9.84 2.28 Cable Tolerance: D* ±20 mm (±0.79 inches) F* ±0.8 mm (±0.03 inches) Curve shown is limit. By adjusting the motor speed, fan can 24
Backward Curved Centrifugal Fan Ø 250 mm (9 3/4 inches) ized FANS FB 250 E DD 102 AA 1090 2080 70 0 FB 250 F DD 102 BA 1950 3500 220 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B C D* E F PCD mm 172 83 56 600 20 250 90 inches 6.77 3.27 2.2 23.62 0.79 9.84 3.54 Cable Tolerance: D* ±10 mm (±0.39 inches) motor speed, fans can.dtl.com 25
ized FANS Backward Curved Centrifugal Fan Ø 280 mm (11 inches) FB 280 E DF 102 AA 1675 2005 150 0 FB 280 F DF 102 BA 2190 2600 310 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B C D* E F PCD mm 191 110 80 600 20 280 90 inches 7.52 4.33 3.15 23.62 0.79 11.02 3.54 Cable Tolerance: D* ±10 mm (±0.39 inches) motor speed, fans can 26
Backward Curved Centrifugal Fan Ø 315 mm (12 1/2 inches) ized FANS FB 315 E DF 102 AA 2130 1950 210 0 FB 315 F DF 102 BA 2370 2140 260 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B C D* E F PCD mm 211 141 102 600 20 315 90 inches 8.31 5.55 4.02 23.62 0.79 12.4 3.54 Cable Tolerance: D* ±10 mm (±0.39 inches) motor speed, fans can.dtl.com 27
ized FANS Backward Curved Centrifugal Fan Ø 355 mm (14 inches) FB 355 E DF 102 AA 2628 1780 288 0 FB 355 F DF 102 BA 1970 1366 128 0 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B C D* E F PCD mm 237 148 102 600 20 355 90 inches 9.33 5.83 4.02 23.62 0.79 13.98 3.54 Cable Tolerance: D* ±10 mm (±0.39 inches) motor speed, fans can 28
Backward Curved Centrifugal Fan Ø 400 mm (15 3/4 inches) ized FANS FB 400 E DF 102 AA 2880 1445 340 93 FB 400 F DF 102 BA 2685 1140 150 75 Material: Galvanized Sheet Steel (Aluminium on request) Dimensions A B C D* E F PCD mm 265 163 112 600 20 400 90 inches 10.43 6.42 4.41 23.62 0.79 15.75 3.54 Cable Tolerance: D* ±10 mm (±0.39 inches) motor speed, fans can.dtl.com 29
ized FANS Axial Fans Ø 200 mm (8 inches) FA 200 D DD 025 AA 960 3300 80 0 FA 200 C DD 050 AA 960 3300 75 0 Material: inted Steel Dimensions A B* C D* E PCD mm 37.5 500 42 6.2 200 58 inches 1.48 19.68 1.65 0.24 7.87 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) motor speed, fans can 30
Axial Fans Ø 250 mm (9 3/4 inches) ized FANS FA 250 D DD 025 AA 1080 1960 60 0 FA 250 C DD 050 AA 1490 2680 100 0 FA 250 B DD 070 AA 1870 3280 165 0 Material: inted Steel Dimensions A B* C D* E PCD mm 38 500 42 6.2 250 58 inches 1.50 19.68 1.65 0.24 9.84 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) motor speed, fans can.dtl.com 31
ized FANS Axial Fans Ø 300 mm (11 3/4 inches) FA 300 D DD 025 AA 1060 1280 65 0 FA 300 C DD 050 AA 1300 1540 80 0 FA 300 B DD 070 AA 1750 2020 160 0 Material: inted Steel Dimensions A B* C D* E PCD mm 48 500 42 6.2 300 58 inches 1.89 19.68 1.65 0.24 11.81 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) motor speed, fans can 32
Axial Fans Ø 350 mm (13 3/4 inches) ized FANS FA 350 C DD 050 AA 1610 960 60 0 FA 350 B DD 070 AA 2050 1220 115 0 Material: inted Steel Dimensions A B* C D* E PCD mm 62.5 500 42 6.2 350 58 inches 2.46 19.68 1.65 0.24 13.78 2.28 Cable Tolerance: B* ±20 mm (±0.79 inches) D* ±0.8 mm (±0.03 inches) motor speed, fans can.dtl.com 33
External Rotor s 60 External Rotor DD 025 AA with fully protected windings (non exposed) and no stamped laminations. * IP 55 available on request Type Efficiency % DD 025 AA Up to 120 0-3500 70 Operating Temperature -10/+40ºC +14/+104ºF Protection IP Electronic Control 44* See below Standard mounting: 4xM4 at 58 mm (2.28 inches) Ø Mounting option: 54 mm (2.13 inches) or 71 mm (2.80 inches) Ø Dimensions A B C D E F G* H* I K L mm 71 58 54 88 78 42 6.2 500 19 92 62 inches 2.80 2.28 2.13 3.46 3.07 1.65 0.24 19.68 0.75 3.62 2.44 Cable Tolerance: G* ±0.8 mm (±0.03 inches) H* ±20 mm (±0.79 inches) Product Performance: Torque Nm 1600 67 0.2 1800 71 0.2 2000 75 0.2 2200 80 0.2 2400 85 0.2 2600 89 0.2 2800 94 0.2 3000 98 0.2 3200 103 0.2 Electronic Control CH 120 AA CH 160 AA Custom control available on request 34
110 External Rotor DD 050 AA with fully protected windings (non exposed) and no stamped laminations. * IP 55 available on request Type Efficiency % DD 050 AA Up to 135 0-3500 81 Operating Temperature -10/+40ºC +14/+104ºF Protection IP Electronic Control 44* See below External Rotor s Standard mounting: 4xM4 at 58 mm (2.28 inches) Ø Mounting option: 54 mm (2.13 inches) or 71 mm (2.80 inches) Ø Dimensions A B C D E F G* H* I K L mm 71 58 54 88 78 42 6.2 500 19 92 62 inches 2.80 2.28 2.13 3.46 3.07 1.65 0.24 19.68 0.75 3.62 2.44 Cable Tolerance: G* ±0.8 mm (±0.03 inches) H* ±20 mm (±0.79 inches) Product Performance: Torque Nm 1400 70 0.3 1600 77 0.3 1800 84 0.3 2000 91 0.3 2200 98 0.3 2400 105 0.3 2600 112 0.3 2800 119 0.3 3000 127 0.3 3200 134 0.3 Electronic Control CH 120 AA CH 160 AA Custom control available on request.dtl.com 35
External Rotor s 160 External Rotor DD 070 AA with fully protected windings (non exposed) and no stamped laminations. * IP 55 available on request Type Efficiency % DD 070 AA Up to 235 0-3500 81 Operating Temperature -10/+40ºC +14/+104ºF Protection IP Electronic Control 44* See below Standard mounting: 4xM4 at 58 mm (2.28 inches) Ø Mounting option: 54 mm (2.13 inches) or 71 mm (2.80 inches) Ø Dimensions A B C D E F G* H* I K L mm 71 58 54 88 78 42 6.2 500 19 92 77 inches 2.80 2.28 2.13 3.46 3.07 1.65 0.24 19.68 0.75 3.62 3.03 Cable Tolerance: G* ±0.8 mm (±0.03 inches) H* ±20 mm (±0.79 inches) Product Performance: Torque Nm 1600 120 0.5 1800 131 0.5 2000 143 0.5 2200 155 0.5 2400 167 0.5 2600 174 0.5 2800 191 0.5 3000 207 0.5 3200 215 0.5 Electronic Control CH 250 AB Custom control available on request 36
250 External Rotor DF 102 AA Type Efficiency % DF 102 AA Up to 325 0-1500 80 Operating Temperature -20/+40ºC -4/+104ºF Protection IP Electronic Control 20 See below External Rotor s Dimensions A B C* D E F G H I K L M N O P mm 120 90 600 140 101 22.5 86 101.5 1.5 13 20 11.6 31 25.2 4.2 inches 4.72 3.54 23.62 5.51 3.98 0.89 3.39 4.00 0.06 0.51 0.79 0.46 1.22 0.99 0.17 Cable Tolerance: C* ±10 mm (±0.39 inches) Product Performance: Torque Nm 1000 220 1.6 1100 241 1.6 1200 260 1.6 1300 280 1.6 1400 298 1.6 1500 320 1.6 Electronic Control CH 350 AA Custom control available on request.dtl.com 37
External Rotor s 250 External Rotor DF 102 BA Type Efficiency % DF 102 BA Up to 320 0-2950 82 Operating Temperature -20/+40ºC -4/+104ºF Protection IP Electronic Control 20 See below Dimensions A B C* D E F G H I K L M N O P mm 120 90 600 140 101 22.5 86 101 1.5 13 20 11.6 31 25.2 4.2 inches 4.72 3.54 23.62 5.51 3.98 0.89 3.39 4.00 0.06 0.51 0.79 0.46 1.22 0.99 0.17 Cable Tolerance: C* ±10 mm (±0.39 inches) Product Performance: Torque Nm 2400 260 0.85 2500 270 0.85 2600 282 0.85 2700 292 0.85 2800 303 0.85 2900 320 0.85 Electronic Control CH 350 AA Custom control available on request 38
120 Two Phase External Electronic Control CH 120 AA Product dimensions idth Depth Height eight PCB assembly only mm 100 90 40 g 150 inches 3.94 3.54 1.57 oz 5.29 Enclosure mm 110 100 50 g 200 inches 4.33 3.94 1.97 oz 7.05 External Electronic Controls Features: Proprietary 2-phase control technique Torque ripple compensation control Over-current protection Locked rotor protection Electronic motor thermal protection Soft start and soft stop function Sensorless control Serial communication control Specifications: Input power (max) 120 Input voltage 230 V ± 10% Supply frequency 50/60 Hz Temperature range -10 to +40 C (+14 to +104 F) Inputs Outputs Protection 0-10 V/PM/serial communication/ fixed speeds Tacho, serial communication IP00 / IP20 Connection Diagram:.DTL.COM 39
External Electronic Controls 160 Two Phase External Electronic Control CH 160 AA Product dimensions idth Depth Height eight PCB assembly only mm 100 90 40 g 150 inches 3.94 3.54 1.57 oz 5.29 Enclosure mm 110 100 50 g 200 inches 4.33 3.94 1.97 oz 7.05 Features: Proprietary 2-phase control technique Torque ripple compensation control Over-current protection Locked rotor protection Electronic motor thermal protection Soft start and soft stop function Sensorless control Serial communication control Specifications: Input power (max) 160 Input voltage 230 V ± 10% Supply frequency 50/60 Hz Temperature range -10 to +40 C (+14 to +104 F) Inputs Outputs Protection 0-10 V/PM/serial communication/ fixed speeds Tacho, serial communication IP00 / IP20 Connection Diagram: 40
250 Two Phase External Electronic Control CH 250 AB Product dimensions idth Depth Height eight PCB assembly only mm 130 105 40 g 180 inches 5.12 4.13 1.57 oz 6.35 Enclosure mm 140 115 50 g 325 inches 5.51 4.53 1.97 oz 11.46 External Electronic Controls Features: Proprietary 2-phase control technique Torque ripple compensation control Over-current protection Locked rotor protection Electronic motor thermal protection Soft start and soft stop function Sensorless control Serial communication control Specifications: Input power (max) 250 Input voltage 230 V ± 10% Supply frequency 50/60 Hz Temperature range -10 to +40 C (+14 to +104 F) Inputs Outputs Protection 0-10 V/PM/serial communication/fixed speeds Tacho, serial communication IP00 / IP20 Connection Diagram:.DTL.COM 41
External Electronic Controls 350 Three Phase External Electronic Control CH 350 AA Product dimensions idth Depth Height eight PCB assembly only mm 130 105 40 g 335 inches 5.12 4.13 1.57 oz 11.82 Enclosure mm 140 115 50 g 325 inches 5.51 4.53 1.97 oz 11.46 Features: Proprietary 3-phase control technique Torque ripple compensation control Over-current protection Locked rotor protection Electronic motor thermal protection Soft start and soft stop function Serial communication control Approval: 230V - CE 277V - ETL Specifications: Input power (max) 350 Input voltage 230 V / 277 V ± 10% Supply frequency 50/60 Hz Temperature range -10 to +40 C (+14 to +104 F) Protection Outputs Inputs IP00 / IP20 Tacho, serial communication 0-10 V / PM / serial communication Connection Diagram: 42
Notes NOTES.DTL.COM 43
NOTES Notes 44
Company Offices USA ellington Drive Technologies US, Inc. 1407 Barclay Blvd Buffalo Grove, IL 60089 USA Phone: +1 (224) 588-8712 Toll Free: +1 (888) 786-4153 Email: sales@wdtl.com Mexico ellington Drive Technologies Mexico PO Box 57 San Juan del Rio Querétaro Mexico 76800 Phone: +52 427 112 9101 Email: sales@wdtl.com Singapore ellington Drive Technologies Pte Ltd 39 Tampines Street 92 #4-00 Singapore 528883 Phone: +65 6373 7200 Fax: +65 6373 7201 Email: sales@wdtl.com The Netherlands ellington Technical Service Centre Europe Luxemburgstraat 114 7559 NB Hengelo The Netherlands Phone: +31 (0) 74 291 9987 Fax: +31 (0) 74 291 5788 Email: sales@wdtl.com Italy ellington Italia Srl Via Torino, 2 20123, Milan Italy Phone: +39 02 7254 6746 Fax: +39 02 7254 6412 Email: sales@wdtl.com Turkey ellington Teknolojileri San Tic Ltd Sti Bostanci Yolu Cad Keyap Sitesi, No:105 Yukari Dudullu, Umraniye 34775 Istanbul Turkey Phone: +90 (0) 216 420 1202 Fax: +90 (0) 216 420 1205 Email: sales@wdtl.com New Zealand ellington Drive Technologies Ltd 16-22 Omega Street, Rosedale North Shore City 0632 New Zealand Phone: +64 (0) 9 414 6590 Fax: +64 (0) 9 414 6591 Email: info@wdtl.com.dtl.com 45
Energy Saving ECM s and Fans T6249 January 2010 www.sussexdesign.com