Application Note TMA Series
|
|
- Oliver Lyons
- 5 years ago
- Views:
Transcription
1 1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x 0.4 x 0.28 ) 15V&24V Models Single and Dual Output Models I/O-Isolation 1000 VDC Operating Temp. Range - C to +85 C 3 Years Product Warranty Applications Distributed power architectures Workstations Computer equipment Communications equipment General Description The TMA series is a range of 1W DC/DC converters in a small SIP Package featuring I/O-isolation of 1000VDC. An excellent efficiency allows an operating temperature range of C to +85 C. These converters offer an economical solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination, digital interfaces or for board level power distribution. Table of contents Absolute Maximum Rating P2 Mechanical Data P74 Output Specification P2 Recommended Pad Layout Single & Dual P74 Input Specification P3 Packaging Information P75 General Specification P6 Soldering and Reflow Consideration P75 P7 Part Number Structure P76 Testing Configurations P72 Safety and Installation Instruction P77 EMC Considerations P73 MTBF and Reliability P77 Input Source Impedance P73 Page 1 of 77
2 Absolute Maximum Rating Parameter Model Min Max Unit Input Voltage Input Surge Voltage ( 1 sec. ) 5VDC Input Models VDC Input Models VDC 15VDC Input Models VDC Input Models Operating Ambient Temperature Without Derating (3.3V,5V & ±5V) Without Derating (all other output) All - + With Derating (3.3V,5V & ±5V) With Derating (all other output) - + Operating Case Temperature All Storage Temperature All Output Specification Output Voltage ( ; Full Load; T A =25 ) Output Regulation Parameter Model Min Nominal Max Unit TMA xx03s TMA xx05s TMA xx09s TMA xx12s TMA xx15s TMA xx05d ±4.85 ±5 ±5.15 TMA xx09d ±8.73 ±9 ±9.27 TMA xx12d ±11.64 ±12 ±12.36 TMA xx15d ±4.85 ±15 ±15.45 Line ( min to max at Full Load) --- ±1.2 ±1.5 % Output Regulation TMA 0503S Load (20% to 100% of Full Load) TMA 0505S TMA 0509S TMA 0512S TMA 0515S TMA 0505D TMA 0509D TMA 0512D TMA 0515D TMA 1203S,23S TMA 1205S,25S TMA 1209S, 29S TMA 1212S, 2412S TMA 1215S, 2415S TMA 1205D, 25D TMA 1209D, 29D TMA 1212D, 2412D TMA 1215D, 1215D TMA 1505S TMA 1512S TMA 1515S TMA 1505D TMA 1512D TMA 1515D VDC % Page 2 of 77
3 Output Specification Parameter Model Min Nominal Max Unit Output Ripple & Noise Peak-to-Peak (5Hz to 20MHz bandwidth) mv pk-pk Temperature Coefficient All --- ±0.01 ±0.02 %/ Output Current TMA xx03s TMA xx05s TMA xx09s TMA xx12s TMA xx15s ma TMA xx05d ±2 --- ±100 TMA xx09d ±1 --- ±56 TMA xx12d ± ±42 TMA xx15d ± ±34 Output Short Circuit Protection All 0.5 Second Max. Input Specification Parameter Model Min Nominal Max Unit Operating Input Voltage 5V Input Models V Input Models V Input Models VDC 24V Input Models Input Current (Maximum value at ;Full Load) TMA 0503S TMA 0505S TMA 0509S TMA 0512S TMA 0515S TMA 0505D TMA 0509D TMA 0512D TMA 0515D TMA 1203S TMA 1205S TMA 1209S TMA 1212S TMA 1215S TMA 1205D TMA 1209D TMA 1212D TMA 1215D TMA 1505S TMA1512S TMA 1515S TMA 1505D TMA 1512D TMA 1515D TMA 23S TMA 25S TMA 29S TMA 2412S TMA 2415S TMA 25D TMA 29D TMA 2412D TMA 2415D Page 3 of 77 ma
4 Input Specification Parameter Model Min Nominal Max Unit Input Standby Current (Typical value at ; No Load) TMA 0503S TMA 0505S TMA 0509S TMA 0512S TMA 0515S TMA 0505D TMA 0509D TMA 0512D TMA 0515D TMA 1203S TMA 1205S TMA 1209S TMA 1212S TMA 1215S TMA 1205D TMA 1209D TMA 1212D TMA 1215D TMA 1505S TMA1512S TMA 1515S TMA 1505D TMA 1512D TMA 1515D TMA 23S TMA 25S TMA 29S TMA 2412S TMA 2415S TMA 25D TMA 29D TMA 2412D TMA 2415D ma Page 4 of 77
5 General Specification Efficiency ( ; Full Load; T A =25 ) Parameter Model Min Nominal Max Unit TMA 0503S TMA 0505S TMA 0509S TMA 0512S TMA 0515S TMA 0505D TMA 0509D TMA 0512D TMA 0515D TMA 1203S TMA 1205S TMA 1209S TMA 1212S TMA 1215S TMA 1205D TMA 1209D TMA 1212D TMA 1215D TMA 1505S TMA1512S TMA 1515S TMA 1505D TMA 1512D TMA 1515D TMA 23S TMA 25S TMA 29S TMA 2412S TMA 2415S TMA 25D TMA 29D TMA 2412D TMA 2415D Isolation Voltage Seconds VDC Isolation Resistance 500VDC MΩ Isolation Capacitance 100KHz, 1V pf Switching Frequency KHz MTBF MIL-STD-217F, TC= K Hours % Page 5 of 77
6 All test conditions are at 25 The figures are identical for TMA 0503S V 5V 5.5V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load 4 Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 6 of 77
7 All test conditions are at 25 The figures are identical for TMA 0503S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 7 of 77
8 All test conditions are at 25 The figures are identical for TMA 0505S V 5V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 8 of 77
9 All test conditions are at 25 The figures are identical for TMA 0505S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 9 of 77
10 All test conditions are at 25 The figures are identical for TMA 0509S V 5V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 10 of 77
11 All test conditions are at 25 The figures are identical for TMA 0509S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 11 of 77
12 All test conditions are at 25 The figures are identical for TMA 0512S V 5V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 12 of 77
13 All test conditions are at 25 The figures are identical for TMA 0512S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 13 of 77
14 All test conditions are at 25 The figures are identical for TMA 0515S V 5V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 14 of 77
15 All test conditions are at 25 The figures are identical for TMA 0515S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 15 of 77
16 All test conditions are at 25 The figures are identical for TMA 0505D V 5V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 16 of 77
17 All test conditions are at 25 The figures are identical for TMA 0505D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 17 of 77
18 All test conditions are at 25 The figures are identical for TMA 0509D V 5V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 18 of 77
19 All test conditions are at 25 The figures are identical for TMA 0509D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 19 of 77
20 All test conditions are at 25 The figures are identical for TMA 0512D V 5V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 20 of 77
21 All test conditions are at 25 The figures are identical for TMA 0512D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 21 of 77
22 All test conditions are at 25 The figures are identical for TMA 0515D V 5V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 22 of 77
23 All test conditions are at 25 The figures are identical for TMA 0515D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 23 of 77
24 All test conditions are at 25 The figures are identical for TMA 1203S V 12V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. = nom ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 24 of 77
25 All test conditions are at 25 The figures are identical for TMA 1203S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 25 of 77
26 All test conditions are at 25 The figures are identical for TMA 1205S V 12V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 26 of 77
27 All test conditions are at 25 The figures are identical for TMA 1205S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 27 of 77
28 All test conditions are at 25 The figures are identical for TMA 1209S V 12V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 28 of 77
29 All test conditions are at 25 The figures are identical for TMA 1209S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 29 of 77
30 All test conditions are at 25 The figures are identical for TMA 1212S V 12V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 30 of 77
31 All test conditions are at 25 The figures are identical for TMA 1212S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 31 of 77
32 All test conditions are at 25 The figures are identical for TMA 1215S V 12V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 32 of 77
33 All test conditions are at 25 The figures are identical for TMA 1215S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 33 of 77
34 All test conditions are at 25 The figures are identical for TMA 1205D V 12V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 34 of 77
35 All test conditions are at 25 The figures are identical for TMA 1205D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 35 of 77
36 All test conditions are at 25 The figures are identical for TMA 1209D V 12V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 36 of 77
37 All test conditions are at 25 The figures are identical for TMA 1209D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 37 of 77
38 All test conditions are at 25 The figures are identical for TMA 1212D V 12V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 38 of 77
39 All test conditions are at 25 The figures are identical for TMA 1212D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 39 of 77
40 All test conditions are at 25 The figures are identical for TMA 1215D V 12V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page of 77
41 All test conditions are at 25 The figures are identical for TMA 1215D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 41 of 77
42 All test conditions are at 25 The figures are identical for TMA 1505S V 15V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 42 of 77
43 All test conditions are at 25 The figures are identical for TMA 1505S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 43 of 77
44 All test conditions are at 25 The figures are identical for TMA 1512S V 15V % of Full Load 16.5V Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 44 of 77
45 All test conditions are at 25 The figures are identical for TMA 1512S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 45 of 77
46 All test conditions are at 25 The figures are identical for TMA 1515S V 15V % of Full Load 16.5V Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 46 of 77
47 All test conditions are at 25 The figures are identical for TMA 1515S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 47 of 77
48 All test conditions are at 25 The figures are identical for TMA 1505D V 15V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 48 of 77
49 All test conditions are at 25 The figures are identical for TMA 1505D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 49 of 77
50 All test conditions are at 25 The figures are identical for TMA 1512D V 15V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 50 of 77
51 All test conditions are at 25 The figures are identical for TMA 1512D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 51 of 77
52 All test conditions are at 25 The figures are identical for TMA 1515D V 15V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 52 of 77
53 All test conditions are at 25 The figures are identical for TMA 1515D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 53 of 77
54 All test conditions are at 25 The figures are identical for TMA 23S V 24V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 54 of 77
55 All test conditions are at 25 The figures are identical for TMA 23S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 55 of 77
56 All test conditions are at 25 The figures are identical for TMA 25S V 24V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 56 of 77
57 All test conditions are at 25 The figures are identical for TMA 25S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 57 of 77
58 All test conditions are at 25 The figures are identical for TMA 29S V 24V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 58 of 77
59 All test conditions are at 25 The figures are identical for TMA 29S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 59 of 77
60 All test conditions are at 25 The figures are identical for TMA 2412S V 24V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page of 77
61 All test conditions are at 25 The figures are identical for TMA 2412S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 61 of 77
62 All test conditions are at 25 The figures are identical for TMA 2415S V 24V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 62 of 77
63 All test conditions are at 25 The figures are identical for TMA 2415S (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 63 of 77
64 All test conditions are at 25 The figures are identical for TMA 25D V 24V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 64 of 77
65 All test conditions are at 25 The figures are identical for TMA 25D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 65 of 77
66 All test conditions are at 25 The figures are identical for TMA 29D V 24V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 66 of 77
67 All test conditions are at 25 The figures are identical for TMA 29D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 67 of 77
68 All test conditions are at 25 The figures are identical for TMA 2412D V 24V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page 68 of 77
69 All test conditions are at 25 The figures are identical for TMA 2412D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 69 of 77
70 All test conditions are at 25 The figures are identical for TMA 2415D V 24V V % of Full Load Input Voltage(V) Efficiency Versus Output Current Efficiency Versus Input Voltage. Full Load Output Voltage(V) Output Load Current(mA) Output Voltage Versus Output Current Typical Output Ripple and Noise. ; Full Load; T A Typical Input Start-Up and Output Rise Characteristic ; Full Load Page of 77
71 All test conditions are at 25 The figures are identical for TMA 2415D (Continued) 100 Output Power (%) Natural convection 100LFM 200LFM 0LFM 20 0 ~ Ambient Temperature ] Derating Output Current Versus Ambient Temperature and Airflow Conduction Emission of EN55022 Class A ; Full Load (See Page 73) Page 71 of 77
72 Testing Configurations Peak-to-peak output ripple & noise measurement test up +Vin +Out Copper Strip +Vin Dual Output DC / DC Converter -Vin +Out Com. -Out Copper Strip Cout Copper Strip Cout Copper Strip Scope Scope Resistive Load Single Output DC / DC Converter Cout Scope Resistive Load -Vin -Out Copper Strip Output voltage and efficiency measurement test up CONTACT AND DISTRIBUTION LOSSES +Vin +Vo CONTACT AND DISTRIBUTION LOSSES üüü V V Load -Vin -Vo Page 72 of 77
73 EMC considerations + + +V out +V out + + +V out +V out R load C1 C2 R load C1 C2 COM R load - - -V out -V out - - -V out -V out Single Output Recommended circuit to comply EN55022 Class A Limits Dual Output Recommended PCB Layout with Input Filter To: comply with EN55022 CLASS A following components are needed: Model Component Value TMA 05xx C1 4.7μF/16V 1206 MLCC TMA 12xx C1 10μF/25V 1206 MLCC TMA 15xx C1,C2 4.7μF/50V 1206 MLCC TMA 24xx C1,C2 4.7μF/50V 1206 MLCC Input Source Impedance The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is commended to use a good quality low Equivalent Series Resistance (ESR < 1.0Ω at 100 KHz) capacitor of a 2.2μF for the 5put devices, a 1.0μF for the 12V,15V input devices and a 0.47μF for the 24V devices. Page 73 of 77
74 Mechanical Dimensions 19.5 [0.77] Pin Connections 0.5 [0.02] 2.35 [0.09] 2.54 [0.10] 5.08 [0.20] 2X2.54 [2X0.10] 0.5 [0.02] 10.2 [0.] 3.2 [0.13] Pin Single Output Dual Output 1 +Vin +Vin 2 -Vin -Vin 4 -Vout -Vout 5 No Pin Common 6 +Vout +Vout 18.5 [0.73] T: 6.1mm(0.24 inch) for 5V&12V Input Models T: 7.1mm(0.28 inch) for 15V&24V Input Models Bottom View [0.02] 0.25 [0.01] 1.3 [0.05] T 1. All dimensions in mm (inches) Tolerance: X.X±0.25 (X.XX±0.01 ) X.XX±0.13 (X.XXX±0.005 ) 2.Pin dimension tolerance:±0.1 (±0.004 ) Weight (5V&12V Input):2.2g Weight (5V&12V Input):2.6g Recommended Pad Layout for Single & Dual Output Converter T [0.05] 2.54 [0.10] 7.62 [0.30] 12.7[0.50] 1.All dimensions in Inches (mm) Tolerance: x.xx±0.02 (x.x ±0.5mm) x.xxx±0.01 (x.xx ±0.25mm) 2. Pin pitch tolerance: ±0.01 (±0.25mm) 3. Pin dimension tolerance: ±0.004 (±0.1mm) Page 74 of 77
75 Packaging Information Soldering and Reflow Considerations Lead free wave solder profile for Page 75 of 77
76 Part Number Structure TMA 2412S Max. Output Power 1W Input Voltage 05: 5V 12: 12V 15: 15V 24: 24V Output Voltage 03: 3.3V 05: 5V 09: 9V 12: 12V 15: 15V Output Mode 1: Single 2: Dual (±) Model Number Input Range (VDC) Output Voltage (VDC) Max. Output Current (ma) Input Current at Full Load (1) (ma) Efficiency (2) (%) TMA 0503S TMA 0505S TMA 0509S TMA 0512S TMA 0515S TMA 0505D ±5 ± TMA 0509D ±9 ± TMA 0512D ±12 ± TMA 0515D ±15 ± TMA 1203S TMA 1205S TMA 1209S TMA 1212S TMA 1215S TMA 1205D ±5 ± TMA 1209D ±9 ± TMA 1212D ±12 ± TMA 1215D ±15 ± TMA 1505S TMA 1512S TMA 1515S TMA 1505D ±5 ± TMA 1512D ±12 ±42 85 TMA 1515D ±15 ±34 85 TMA 23S TMA 25S TMA 29S TMA 2412S TMA 2415S TMA 25D ±5 ± TMA 29D ±9 ± TMA 2412D ±12 ± TMA 2415D ±15 ±34 53 Note 1. Maximum value at nominal input voltage and full load of standard type. Note 2. Typical value at nominal input voltage and full load. Page 76 of 77
77 Safety and Installation Instruction Fusing Consideration Caution: This power module is not internally fused. An input line fuse must always be used. This encapsulated power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated part of sophisticated power architecture. To maximum flexibility, internal fusing is not included; however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a normal-blow fuse in 5Vin with maximum rating of 500mA, in 12Vin with maximum rating of 200mA, in 15Vin with maximum rating of 150mA and in 24Vin with maximum rating of 100mA. Based on the information provided in this data sheet on Inrush energy and maximum dc input current; the same type of fuse with lower rating can be used. Refer to the fuse manufacturer s data for further information. The MTBF of TMA series of DC/DC converters has been calculated using MIL-HDBK 217F NOTICE2, Operating Temperature 25, Ground Benign. Specifications can be changed without notice Model MTBF Unit TMA 0503S 5,992,510 TMA 0505S 5,7,347 TMA 0509S 4,212,743 TMA 0512S 2,928,258 TMA 0515S 2,393,776 TMA 0505D 5,641,749 TMA 0509D 4,253,057 TMA 0512D 3,013,182 TMA 0515D 2,466,852 TMA 1203S 6,033,182 TMA 1205S 5,818,182 TMA 1209S 4,232,4 TMA 1212S 2,937,936 TMA 1215S 2,0,2 TMA 1205D 5,677,786 TMA 1209D 4,273,504 TMA 1212D 3,023,431 Hours TMA 1215D 2,473,717 TMA 1505S 2,122,579 TMA 1512S 2,237,762 TMA 1515S 2,353,634 TMA 1505D 2,237,762 TMA 1512D 2,351,558 TMA 1515D 2,351,558 TMA 23S 5,494,506 TMA 25S 5,315,614 TMA 29S 3,9,396 TMA 2412S 2,4,066 TMA 2415S 2,310,136 TMA 25D 5,198,181 TMA 29D 3,996,004 TMA 2412D 2,881,844 TMA 2415D 2,378,122 Rev. 01/13 Jenatschstrasse 1 CH-02 Zurich Switzerland Tel Fax Page 77 of 77
DC/DC Converter 9 to 18Vdc and 18 to 36Vdc and 36 to 75Vdc input, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20 Series Application Note DC/DC Converter 9 to 18Vdc and 18 to 36Vdc and 36 to 75Vdc input, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models
TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual
TEP 200WIR Series, 180 240 Watt
TEP 200WIR Series, 180 240 Watt Features Chassis mount with screw terminal block Including EMI filter to meet EN 55022, class A Ultra wide 4:1 input voltage ranges 8.5 36, 16.5 75, 43 160 VDC EN 50155
SELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
R-78xx-0.5 INNOLINE. Features. 0.5 AMP SIP3 Single Output. Derating-Graph (Ambient Temperature) DC/DC-Converter
Features Description Efficiency up to 97%,Non isolated, no need for heatsinks Pin-out compatible with LM78XX Linears Very low profile( L*W*H=11.5*7.5*10.2 ) Wide input range.(4.75v ~ 32V) Short circuit
NOT RECOMMENDED FOR NEW DESIGNS
28 Volt NOT RECOMMENDED FOR NEW DESIGNS Features Attenuation 0 db from 110 khz to 0 MHz Operating temperature - to +8 C Nominal 28 V input, 0 V to 0 V operation 1.7 to A throughput current Transient suppression
CMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Single or Dual Isolated Outputs 1kVDC or 3kVDC options Wide temperature performance at full 0.75W load -40 C to 85C Industry Standard Pinouts 5V, 12V
Delphi Series V48SH, 1/16 th Brick 35W DC/DC Power Modules: 48V in, 1.0V, 35A out
Delphi Series V48SH, 1/16 th Brick 35W DC/DC Power Modules: 48V in, 1.0V, 35A out The Delphi Series V48SH, 1/16 th Brick, 48V input, single output, isolated DC/DC converter, is the latest offering from
UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit Protected Pinned
Series AMLDL-Z Up to 1000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC
O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications
Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection
LDO03C/LDO06C/LDO10C
NEW LDO03C/LDO06C/LDO10C A p p l i c a t i o n N o t e 1 8 6 1. Introduction 2 2. Models Features 2 3. General Description Electrical Description 2 Physical Construction 2 4. Features and Functions Wide
S24SE/S24DE series 20W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 88% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter
FEATURES Efficiency up to 87% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: 25.4 x25.4 x10.2mm (1.0 x1.0 x0.40 )(No HSK) Over voltage protection, hiccup mode Over current
Rail-to-Rail, High Output Current Amplifier AD8397
Rail-to-Rail, High Output Current Amplifier AD8397 FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails
Delphi Series V48SC, 1/16th Brick 100W DC/DC Power Modules: 48V in, 12V, 8.3A out
Delphi Series V48SC, 1/16th Brick 100W DC/DC Power Modules: 48V in, 12V, 8.3A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from
DC-DC Converter Module
45 Features DC input range: 250-425V Input surge withstand: 500V for 100ms DC output: 24V Programmable output: 10 to 110% Regulation: ±0.2% no load to full load Efficiency: 88% Maximum operating temperature:
UMEC International Corporation
UP1301A SERIES 130 Watt Open Frame Switchers Small Size 3*5*1.2(inches) Universal Input to 264 VAC Low Power Consumption Overvoltage Protection Continuous Short Circuit Protection Over Temperature Protection
* Requires external power line filter and hold up capacitors; see typical applica on circuit and app notes for details
The 8500 module contains all of the necessary circuitry for complete power line compliance with aeronau cs specifica on RTCA/DO 60G and Boeing's D6 36440(C)*. It is a pin for pin and form fit compa ble
INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components
7.5 Watt AC-DC Switch Power Supply
MAIN FEATURES: 7.5W Small Compact Size PCB Mount Single Output Regulated Output Range : 3.3VDC 24VDC Input Range : 85VAC 265VAC/47 63Hz Or 120VDC 370VDC Very Low Standby Power Consumption < 0.15W Better
650W Single Output Power Supply
AK-650 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to 9% + / 0.5A auxiliary output Intelligent
High Accuracy, Ultralow IQ, 1.5 A, anycap Low Dropout Regulator ADP3339
Data Sheet High Accuracy, Ultralow IQ,.5 A, anycap Low Dropout Regulator FEATURES FUNCTIONAL BLOCK DIAGRAM High accuracy over line and load: ±.9% at 5 C, ±.5% over temperature Ultralow dropout voltage:
Delphi Series V48SC, 1/16th Brick 90W DC/DC Power Modules: 48V in, 12V, 7.5A out
Delphi Series V48SC, 1/16th Brick 90W DC/DC Power Modules: 48V in, 12V, 7.5A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from
Limited Ericsson Internal
Limited TABLE PRODUCT OF CONTENTS SPECIFICATION 1 (1) (3) SEC/D Kevin Chen 152-EN/LZT146311 1/131-BMR632 Technical Uen Specification PKL 4 PI series 26-12-4 27-1-11 B D DC/DC converters, Input 36-, Output
Silvertel. Ag5200. 1 Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W output power
Silvertel V1.1 November 2012 Datasheet Pb 1 Features IEEE802.3at and IEEE802.3af compliant Maximum 30W output power Dual In-Line (DIL) package size 50.6mm (L) x 30mm (W) Overload, short-circuit and thermal
650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power
Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal
PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages
DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected
28 Volt Input - 40 Watt
Features Powers 28 volt dc-dc converters during power dropout Input voltage 12 to 40 volts Operating temperature -55 to +125 C Reduces hold-up capacitance by 80% Inhibit function Synchronization function
Operating Manual UWAPS-TINY Series
Operating Manual UWAPS-TINY Series Powecon Oy WWW.POWECON.FI 1/9 Table of content 1 Warranty...3 2 Safety information...3 3 Abbreviations and terminology...3 4 List of appendices...4 5 Introduction...4
Maximum Input Current Vin=18V, 100% Load 12.6 13.1 A
FEATURES Wide input voltage range, 18~60V 200W Output @ 18V~27V Vin range 300W Output @ 27~60V Vin range (Including 27V) Full Load Efficiency up to 88.3% @48Vin Intergrated fuse holder Parallel Connection
1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)
000W Single Output Power Supply AK-000 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output U profile,
Single Output Switching Power Supply
.. RS- Code: CLP-A Single Output Switching Power Supply SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY EMC (Note 6) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE
LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT
184 WLED Matrix Driver with Boost Converter FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier) 250 mv
Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current
5.5 V Input, 300 ma, Low Quiescent Current, CMOS Linear Regulator ADP122/ADP123
Data Sheet 5.5 V Input, 3 ma, Low Quiescent Current, CMOS Linear Regulator ADP/ADP3 FEATURES Input voltage supply range:.3 V to 5.5 V 3 ma maximum output current Fixed and adjustable output voltage versions
High Accuracy, Ultralow IQ, 1 A, anycap Low Dropout Regulator ADP3338
High Accuracy, Ultralow IQ, 1 A, anycap Low Dropout Regulator ADP3338 FEATURES High accuracy over line and load: ±.8% @ 25 C, ±1.4% over temperature Ultralow dropout voltage: 19 mv (typ) @ 1 A Requires
STRATO LED Drivers 70W, Single output
Features STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED
APD336.221/.421 3 Outputs 19" DC/DC Converter, 50 Watt
APD336.221/.421 3 Outputs 19" DC/DC Converter, 50 Watt High efficiency: 79% (@ 48V) DCin wide range: 9...36V or 18...72V DC 8 HP plug in width H15 standard pinout Active inrush current suppression Voltage
47000 SERIES - ELECTRONIC TRANSFORMERS
7000 SERIES - ELECTRONIC TRANSFORMERS MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topology. They constitute an interesting alternative to the traditional
EPL225 Series. 225 Watts. www.xppower.com. AC-DC Power Supplies. Models & Ratings. Summary
225 Watts 50 W Convection/ 225 W Forced-cooled Ratings 2 by 4 Footprint Low.26 Profile 2 V Fan Output High Efficiency, up to 95% ITE & Medical pprovals High Power Density Less than 0.5 W No Load Input
Vanguard DC /DC-Technology - worldwide -
Vanguard DC /DC-Technology - worldwide - Catalogue INTERNATIONAL POWER For new s and latest product updates see: INTERNATIONAL POWER Vanguard DC/DC-Technology - worldwide ECONOLINE INNOLINE POWERLINE When
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
MODEL TUHS3F05 TUHS3F12 TUHS3F24 VOLTAGE[V] AC85-264 1f DC120-370
AC-DC Power Supplies PCB Mount Type TUHS3 Ordering information TUH S 3 F 05 1 2 3 4 5 R 1 Series name 2 Single output 3 Output wattage 4 Universal Input 5 Output voltage *Avoid short circuit between +BC
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
Lockout Hysteresis Voltage 1 2 3 VDC Maximum Input Current Vin=18V, 100% Load 13.0 13.5 A Vin=24V 180 220 ma
FEATURES Ultra wide input voltage range, 18~106V 200W Output @ 18V~27V Vin range 300W Output @ 27~106V Vin range (Including 27V) Full Load Efficiency up to 91.0% @48Vin Intergrated fuse holder Parallel
ICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock
Analog signal converters CC-E I/I Current / current isolators
ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between
High Speed, Low Cost, Triple Op Amp ADA4861-3
High Speed, Low Cost, Triple Op Amp ADA486-3 FEATURES High speed 73 MHz, 3 db bandwidth 625 V/μs slew rate 3 ns settling time to.5% Wide supply range: 5 V to 2 V Low power: 6 ma/amplifier. db flatness:
Silvertel. Ag9800M. 1. Features. 2. Description. Miniature PoE Module. Small SMT package. IEEE802.3af compliant. Low cost
Silvertel V1.2 December 2014 Datasheet Ag9800M Miniature PoE Module Pb 1. Features Small SMT package IEEE802.3af compliant Low cost Input voltage range 36V to 57V Minimal external components required Short-circuit
PowerAmp Design. PowerAmp Design PAD135 COMPACT HIGH VOLATGE OP AMP
PowerAmp Design COMPACT HIGH VOLTAGE OP AMP Rev G KEY FEATURES LOW COST SMALL SIZE 40mm SQUARE HIGH VOLTAGE 200 VOLTS HIGH OUTPUT CURRENT 10A PEAK 40 WATT DISSIPATION CAPABILITY 200V/µS SLEW RATE APPLICATIONS
SELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope)
OBSOLETE NMPD0 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Efficiency (Min.) Power (Max.) V V % W NMPD003C 3. 9.50 NMPD005C 5. 9.5 NMPD0C. 0 0.00 NMPD05C 5. 9 0.00 FEATURES RoHS
Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
CAUTION! THE 7I29 USES VOLTAGE AND POWER LEVELS THAT REPRESENT A HAZARD TO LIFE AND LIMB.
7I29 MANUAL Rev 1.5 CAUTION! THE 7I29 USES VOLTAGE AND POWER LEVELS THAT REPRESENT A HAZARD TO LIFE AND LIMB. THE 7I29 IS INTENDED FOR USE BY OEMS THAT WILL INTEGRATE IT INTO A SYSTEM WITH INTERLOCKS AND
55K SERIES 28 Vin DC/DC Converter 75 Watt Single & Triple Outputs
55K SERIES 28 Vin DC/DC Converter 75 Watt Single & Triple Outputs Features High Power Density, Low Profile Packaging Full Output Power at +100 C Baseplate Temperature Switching Power Supply Low Noise Designed
SMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
DC/DC converter Input 36-72 Vdc Output up to 15A/60W
PKG 4000 I DC/DC converter Input 36-72 Vdc Output up to 15A/60W Size 74.7x63.5x11.0 mm (2.94x2.50x0.433 in.) Efficiency typ 86% (5 V) at full load 1500 Vdc isolation voltage MTBF >200 years at +75 C case
Aluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
ICS379. Quad PLL with VCXO Quick Turn Clock. Description. Features. Block Diagram
Quad PLL with VCXO Quick Turn Clock Description The ICS379 QTClock TM generates up to 9 high quality, high frequency clock outputs including a reference from a low frequency pullable crystal. It is designed
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
TRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
Powering Integrated Circuits (ICs), and managing ripple voltage as it relates
Ripple Voltage & ESR Powering Integrated Circuits (ICs), and managing ripple voltage as it relates to ESR of capacitors Low voltage ICs require supply voltage (Vcc) to have reduced levels of ripple voltage
High Precision TCXO / VCTCXO Oscillators
Available at Digi-Key** www.digikey.com High Precision TCXO / VCTCXO Oscillators 2111 Comprehensive Drive Phone: 60-81- 722 Fax: 60-81- 00 US Headquarters: 60-81-722 European Headquarters: +-61-72221 Description:
Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSB~TARSB Point Regulators (Low-Dropout Regulator) TARSB~TARSB The TARSBxx Series is comprised of general-purpose bipolar single-power-supply
40 V, 200 ma NPN switching transistor
Rev. 01 21 July 2009 Product data sheet BOTTOM VIEW 1. Product profile 1.1 General description NPN single switching transistor in a SOT883 (SC-101) leadless ultra small Surface-Mounted Device (SMD) plastic
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
CPCI-3U-AC-300W-R. Rugged 300W AC Input 3U CompactPCI Power Supply. Electrical Specification for: Telkoor Part Number: 900-4602-0000
Electrical Specification for: CPCI-3U-AC-300W-R Rugged 300W AC Input 3U CompactPCI Power Supply Telkoor Part Number: 900-4602-0000 GENERAL SCALE RELEASE DATE 12/9/06 SHEET 1 OF 6 REVISION HISTORY Rev Level
DS 600. A contact free flux gate based current measurement sensor 600A rms
DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum
CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features.
CA73, CA73C Data Sheet April 1999 File Number 788. Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA without External Pass Transistors The CA73 and CA73C are silicon monolithic integrated
帝 聞 企 業 股 份 有 限 公 司 DEE VAN ENTERPRISE CO., LTD. SP-235864 DSL-20WA 420024 1 Revision: A Date: 2011.10.24 FOR AC-DC LED DRIVER MODEL NO.
CUSTOMER: PART NUMBER: A200 APPROVAL SHEET FOR AC-DC LED DRIVER MODEL NO. DSL-20WA 420024 1 ORDER NO: SP-235864 承 認 書 确 認 后 請 簽 回 一 份 CUSTOMER APPROVED SIGNATURE DEE VAN ENTERPRISE CO., LTD (Head-Quarter)
1A L.D.O VOLTAGE REGULATOR
FEATURES Output Current up to 1 A Low Dropout Voltage (1.2V at 1A Output current) Three Terminal Adjustable(ADJ) or Fixed 1.2V, 1.5V, 1.8V, 2.5V, 2.85V, 5.0V Line Regulation typically at 0.1% max. Load
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
OKI-78SR Series Fixed Output 1.5 Amp SIP DC/DC Converters
OKI-78SR Series Typical unit FEATURES Ultra wide 7 to 36 VDC input range Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps Vertical SIP-mount, small footprint package No heat sink direct replacement for 3-terminal
Instruction Manual PFE300S 500S SERIES. TDK-Lambda PFE300S 500S Series INSTRUCTION MANUAL
PFE300S 500S SERIES Instruction Manual TDK-Lambda PFE300S 500S Series BEFORE USING THE POWER SUPPLY UNIT Be sure to read this instruction manual thoroughly before using this product. Pay attention to all
Technical Specification for 5VDC/2A +12VDC/2A Adapter
Technical Specification for 5VDC/2A +12VDC/2A Adapter Contents 1. SCOPE This specification defines the performance characteristics of a grounder,single phase, 34 Watt,2 outputs power supply.this specification
MASW-007070-0001TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information
Features Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel are Available Lead-Free 4 x 6 mm PQFN Package
1.5A Very L.D.O Voltage Regulator LM29150/29151/29152
FEATURES High Current Capability 1.5A Low Dropout Voltage 350mV Low Ground Current Accurate 1% Guaranteed Initial Tolerance Extremely Fast Transient Response Reverse-Battery and "Load Dump" Protection
Datasheet. Arrant-Light Oy. 120W DR Series 3.8.2015
3.8.2015 Arrant-Light Oy Datasheet 120W DR Series DR120 Series 120W Single Output LED Driver Features: Constant current and voltage output Universal AC input 100~305VAC Built in active PFC function Output
RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,
APPROVAL SHEET CUSTOMER ituner CUSTOMER P/N DESCRIPTION EDAC MODEL 12V/6.6A SERIES NO. (E17) EA10953A DATE 2010-06-22 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP
7-41 POWER FACTOR CORRECTION
POWER FTOR CORRECTION INTRODUCTION Modern electronic equipment can create noise that will cause problems with other equipment on the same supply system. To reduce system disturbances it is therefore essential
5W LED Lump Module Design with FT831B
5W LED Lump Module Design with FT831B 2009 Fremont Micro Devices ERP831BA1 - Page1 Index 1 INTRODUCTION... 3 2 MODULE SPECIFICATION... 3 2.1 Input Characteristics... 3 2.2 Output Characteristics... 3 2.3
Datasheet. 2A 380KHZ 20V PWM Buck DC/DC Converter. Features
General Description Features The is a 380 KHz fixed frequency monolithic step down switch mode regulator with a built in internal Power MOSFET. It achieves 2A continuous output current over a wide input
DATA SHEET. TDA1510AQ 24 W BTL or 2 x 12 W stereo car radio power amplifier INTEGRATED CIRCUITS
INTEGRATED CIRCUITS DATA SHEET 24 W BTL or 2 x 12 W stereo car radio File under Integrated Circuits, IC01 January 1992 GENERAL DESCRIPTION The is a class-b integrated output amplifier encapsulated in a
EGSTON Standard E2xFxWx 12W
General description The family of switchmode power supplies offers an unmatched degree of flexibility and performance fulfilling even the most stringent requirements. Highly flexible electrical configuration
Top Microsystems Proprietary Specification P/N: W090015HK-XP 022410RB-082709V.A0 SPECIFICATION
SPECIFICATION High Quality Switching Wallmount Adapter Interchangeable AC Plugs 90-264VAC Input 13.5W 9VDC 1.5A Output P/N: W090015HK-XP ** Specification Approval** This specification (total 11 pages including
TS321 Low Power Single Operational Amplifier
SOT-25 Pin Definition: 1. Input + 2. Ground 3. Input - 4. Output 5. Vcc General Description The TS321 brings performance and economy to low power systems. With high unity gain frequency and a guaranteed
LM118/LM218/LM318 Operational Amplifiers
LM118/LM218/LM318 Operational Amplifiers General Description The LM118 series are precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator Description: The NTE923 and NTE923D are voltage regulators designed primarily for series regulator applications. By themselves, these devices
Enpirion Power Datasheet EP53F8QI 1500 ma PowerSoC Voltage Mode Synchronous PWM Buck with Integrated Inductor
Enpirion Power Datasheet EP53F8QI 1500 ma PowerSoC Voltage Mode Synchronous PWM Buck with Integrated Inductor Description The EP53F8QI provides high efficiency in a very small footprint. Featuring integrated
www.murata-ps.com D1U54P-W-1200-12-HxxC Series 54mm 1U Front End AC-DC Power Supply Converter www.murata-ps.com/support PRODUCT OVERVIEW FEATURES
www.murata-ps.com PRODUCT OVERVIEW D1U54P-W-1200-12-HxxC Series The D1U54P-W-1200-12-HxxC series are 80 PLUS Platinum effi ciency 1200 watt, power factor corrected front end supplies with a 12V main output
HA-5104/883. Low Noise, High Performance, Quad Operational Amplifier. Features. Description. Applications. Ordering Information. Pinout.
HA5104/883 April 2002 Features This Circuit is Processed in Accordance to MILSTD 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. Low Input Noise Voltage Density at 1kHz. 6nV/ Hz (Max)
DUAL%CHANNEL BROADBAND%LINEAR%AMPLIFIER Model&A800D
ELECTRONICS AB DUAL%CHANNEL BROADBAND%LINEAR%AMPLIFIER Model&A800D & HIGH&VOLTAGE& FIXED&GAIN& BROADBAND & 800Vpp&60mA& 100x& DC&to&ca&200&kHz & LOW&OUTPUT&IMPEDANCE& HIGH&SLEW&RATE &
AVD75-48S1V2. Product Descriptions. Applications. 30 Watts
30 Watts Sixteenthbrick Converter Page 1 Total Power: 30 Watts Input Voltage: 36 to 75 Vdc # of Outputs: Single Special Features Delivers up to 25A output Ultrahigh efficiency 87% typ. at half load and
Symbol Parameters Units Frequency Min. Typ. Max. 850 MHz 14.8 16.3 17.8
Product Description Sirenza Microdevices SGC-689Z is a high performance SiGe HBT MMIC amplifier utilizing a Darlington configuration with a patented active-bias network. The active bias network provides
LM138 LM338 5-Amp Adjustable Regulators
LM138 LM338 5-Amp Adjustable Regulators General Description The LM138 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5A over a 1 2V to 32V output range
OKR-T/30-W12-C Adjustable Output 30-Amp SIP-mount DC-DC Converters
www.murata-ps.com OKR-T/30-W12-C Typical unit FEATURES 700 KHz operation 5.5-13.8 Vdc input voltage range Programmable output voltage from 0.591-6.0 VDC High power conversion effi ciency at 95% Outstanding
High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 00 db typ 60 Hz: 00 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.00% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
XLD200. Plug-and-Play Multi Channel 200 Watt LED Driver. UL/cUL Listed LED Drivers. Model Selection Key XLD200-ABBV-FC. The LED Driver Expert
The ED Driver Expert Plug-and-Play Multi Channel 200 Watt ED Driver The GRE Alpha XD series is the industry s only U isted ED driver. As a standalone unit, this unique patented, conduitready, ED power
Input and Output Capacitor Selection
Application Report SLTA055 FEBRUARY 2006 Input and Output Capacitor Selection Jason Arrigo... PMP Plug-In Power ABSTRACT When designing with switching regulators, application requirements determine how