integrated communication solution copper

integrated communication solution copper

integrated communication solution copper Contents: CC Copper Closet WS Workstation CU Copper UTP Cable AFC Group s range of integrated communication products includes the innovative and patented SMP Data Communications copper cabling solution. An industry pioneer in copper cabling technology, and now part of Optical Cable Corporation (OCC), SMP products are the optimum choice to complement an AFC fibre network. AFC s total communications cabling solution encompasses a full portfolio of fibre optic products, copper closet, workstation and copper cabling.

Copper Closet

Copper Closet Contents: CC-2 CC-5 CC-8 CC-14 CC-17 Limited Axcess Solution Category 6a Solutions Patch Panels Zone Distribution Solutions Cable Assemblies & Patch Cords CC-20 110 Blocks SMP Data Communications Copper Closet connectivity solutions offer customers engineering excellence and design innovation. From patented circuit board technology to 100% component erformance-tested patch cords, SMP continuously strives to produce quality connectivity components that offer reliability and value. This dedication to manufacturing produces components that exceedingly surpass industry standards and customer expectations.

Limited Axcess Copper Closet cc-2 Applications 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Voice Broadband Video All other applications developed for operation over class E cabling Keyed Copper Network Solutions In part because of the research and development associated with developing a guaranteed 10 Gig system, SMP was able to generate a whole new product line for securing and segmenting network access while continuing to offer superior performance. The patented Limited Axcess RJ45 product line offers enhanced network security by providing physically restrictive access to the network using a unique plug and jack interconnect system. Additionally, SMP s signature Bezel system and Patch Cord boot combination create multiple levels of keyed access to the network. This break through technology provides enhanced system performance exceeding TIA Category 6a component requirements. Whether your concern is HIPAA, Sarbanes Oxley, Security Clearance or just controlled access to your network, SMP Data Communication s Limited Axcess product line will provide physical control of user access for the network administrator and bandwidth above any copper system available. Limited Axcess jacks exceed Category 6a component performance requirements Two layers of enhanced security may be deployed independently, as either the proprietary plugs and jacks or keyed bezels. Prohibits unauthorized access. Available in 8 different colored keyed bezel and boot combinations. Conversion patch cords are available to connect standard Ethernet hardware to the Limited Axcess network. UL listed communications circuit accessory. Compliant with Power over Ethernet (PoE) requirements Contact material - high strength beryllium copper alloy Contact plating - 50 µin gold over nickel

Limited Axcess Copper Closet cc-3 Limited Axcess Jacks SMP s patented Limited Axcess jacks are the initial component when creating a Limited Axcess secure network. These unique jacks offer an innovative security layer for establishing a physically restrictive network system through keyed configurations and locking keyed bezels. Deployed with the keyed strain relief and plugs found on the Limited Axcess patch cords, the entire system can easily segregate any network segment for physical security. In addition to the security aspect of the Limited Axcess jacks, these RJ45 components exceed TIA Category 6a component performance requirements with a dramatic increase in primary parameter performance. Bezels may be applied after installation to lock jacks in place Compliant with Power over Ethernet (PoE) requirements Contact material high strength beryllium copper alloy; Contact plating 50 µm gold over nickel Available in 8 different colored keyed bezel combinations Shielded keystone version available as well call factory for details LA6Axx Limited Axcess Jacks Limited Axcess Cat 6a RJ45 jack with keyed bezel * Replace xx with color code see color code chart Limited Axcess Color Code Chart Code Color Code Color 02 Black 06 Gray 03 Red 07 White 04 Green 08 Orange 05 Blue 09 Yellow Limited Axcess Patch Cords The Limited Axcess patch cord, with its patented plug technology, is a key component to creating a secure Limited Axcess system. This one-of-a-kind patch cord uses a keyed plug and a unique locking boot to provide two layers of physically restrictive network security. Both these layers of enhanced security may be deployed independently as either the proprietary plugs with corresponding jacks or the keyed bezels with matching locking boots. In addition, performance exceeds TIA Category 6a component requirements. Locking boot applied during manufacturing Conversion patch cords available to connect standard Ethernet hardware to the Limited Axcess system Available in 8 different colored keyed boot combinations Cable color is gray Limited Axcess Patch Cords LAPC6A - M - - XX YY Cable Type Plug One Plug Two Plug Two Boot Length In Feet Denotes Boot Color S Shielded U Unshielded K Keyed Boot B Non-keyed Boot M Keyed Plug A 568A Wired B 568B Wired K Keyed Boot B Non-keyed Boot S Slimline Boot N No Boot See Color Code Chart Ex: LAPC6AS-MK-AS0309 = Limited Axcess Shielded Patch Cord, Keyed plug and boot on one side and A wired with Slimline boot on other side, 3 feet, yellow

Limited Axcess Copper Closet cc-4 Limited Axcess Secure Faceplates To create truly limiting admission to secure networks, SMP went one step further in developing the Limited Axcess product line and created faceplates that offer an added layer of defense for segregating specific networks. The SMP Secure faceplate is double layered with the outer stainless steel faceplate acting as a locking mechanism, securing the bezels onto the jack and preventing access for removal. Stainless steel construction for corrosion resistance Tamper proof screws included Minimum ordering quantities may apply LAFP01SS LAFP02SS Limited Axcess Secure Faceplates Limited Axcess Stainless Steel Secure Faceplate Kit, 1 port Limited Axcess Stainless Steel Secure Faceplate Kit, 2 port Limited Axcess Patch Panels From the outlet to the equipment room, SMP s new keyed copper solution offers physically restrictive access to assist in network segregation. For the communications closet, the Limited Axcess system allows network administrators to easily control user connectivity to specific network segments. By using SMP s 24 port snap-in patch panel and Limited Axcess RJ45 jacks, network permissions can be effortlessly managed. Furthermore, Limited Axcess patented technology provides enhanced system performance exceeding Category 6a requirements. This one-of-a-kind system is ideal for applications where restrictive network security is required or for end users looking for superior bandwidth performance. 24 port snap in panel Limited Axcess and color options on page CC-3 A24 Limited Axcess Patch Panels Limited Axcess Snap-In Patch Panel, 24 Port, 2 RU (Jacks not included)

Category 6a Solution Copper Closet cc-5 Category 6a Solution For 10 GBASE-T Applications Applications 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 155/622 Mbps ATM 100 Mbps TP-PMD 4/16 Mbps Token Ring Voice With the number of new 10 Gigabit structured cabling solutions flooding the market, SMP has developed a system that sets the standard for this next generation of technology. SMP created components that are not only guaranteed to surpass the IEEE throughput standards but exceed the elevated frequency response requirements of TIA. This deliberate and methodical approach to component design has led SMP to create superior 10 Gigabit shielded and un-shielded systems. Within these system solutions, SMP has kept one thing constant and that is our commitment to quality. Whether choosing a UTP or FTP 6a solution, customers can be assured that they are getting a connection to count on. Guaranteed 10 GBASE-T link segment performance compliant 10 GBASE-T 100m Solution Backward compatibility (Cat 6, Cat 5e, and Cat 3 compliant) Fully inter-operable with other standards based components and systems Power over Ethernet (PoE) compliant Twice the bandwidth of Category 6 cabling SMP's 10 Gig solution reaches beyond the current Category 6 specifications and creates a system that offers enhanced performance and guaranteed 6a connectivity. As a system, the SMP UTP or FTP 6a solution offers superior alien cross-talk performance that exceeds ISO Class E, Augmented Cat 6 and IEEE 10 GBASE-T requirements for a full 100 meters.

Category 6a Solution Copper Closet cc-6 Category 6a Outlet Jacks SMP s Augmented Category 6 jack offers a high performance interconnect hardware component in a compact form factor. This RJ45 Slim-line Category 6a jack provides a comprehensive solution for high performance structured cabling systems. Using patented crosstalk reduction technology and multiple printed circuit boards, SMP engineering has developed its highest performing component product yet. In addition to the performance levels, the small sized form factor of the Slim-line design supports high density applications allowing for 24 ports in a 1U panel for shielded applications. U6Axx K6Axx K6A02S SMP Category 6a Outlet Jacks Category 6a UMJ outlet jack, UTP - Unshielded Category 6a KMJ outlet jack, UTP - Unshielded, Slim-line Category 6a KMJ outlet jack, FTP - Shielded, Slim-line * Replace xx with color code see color code chart in Workstation section KMJ Jacks & Adapters Guaranteed Augmented Category 6 compliant Slim-line profile allows 24 ports in a 1U panel. IEEE - 10GBASE-T 802.3an clause 55.7 (compliant to link definition) TIA - TSB-155 (Channel compliant) & 568b.2-10 (Component compliant) ISO - TR-24750 (Channel compliant) Versatile form factor allows implementation in most vendor faceplates. New high performance contacts provide low crosstalk with improved mechanical robustness. Single stuffer cap. Terma-grip technology for easy field installation. Minimized shielding aperture size for reduced EMI emissions. 2 PCB Mezzanine assemblies for low crosstalk performance in a small form factor. Improved strain relief system designed for Category 6a cable. UL listed communications circuit accessory. Large easy-to-read color code labels. Compliant with Power over Ethernet (PoE) requirements. Contact material - high strength beryllium copper alloy Contact plating - 50 µin gold over nickel Category 6a Patch Cords To complete the link, SMP created Category 6a station cords that guarantee 6a compliance and offer superior PSANEXT performance suitable for mitigation of alien cross-talk. These station cords also improve the external noise immunity of structured communications cabling systems and EMI suppression through shielded cabling and plug design. Overall, SMP s Cat 6a patch cords assist in creating a complete 10 Gigabit throughput system that is reliable for years to come. Guaranteed Augmented Category 6 compliant Backward compatible with Category 3, 5, 5e and 6 Superior PSANEXT performance suitable for mitigation of alien cross-talk in existing installs Superior PSAACR-F performance Superior EMI suppression Improves the external noise immunity of structured cabling systems LS0H or PVC cable construction PVC patch cord is UL Listed PC6AS-B-xxyy* SMP Category 6a Patch Cords Category 6a patch cord with boot * Replace xx with length in feet; replace yy with color choice - 06=Data Gray (Standard) ** UL Listed CCA File E137579 Ex: PC6AS-B-0306 = Category 6a patch cord with boot, 3 feet, Gray (Standard)

Category 6a Solution Copper Closet cc-7 Category 6a Patch Panels SMP Data Communications Category 6a Patch Panels offer a high density solution for guaranteed 10GBASE-T Ethernet applications. Both SMP s UTP and FTP Cat 6a patch panels present a product solution that exceeds proposed 10Gbit standards by TIA/EIA and promises superior performance compliance. As a 10 Gig component, the Category 6a patch panel is ideal for end users who are looking for superior network performance to keep their infrastructure lasting well into the future. Guaranteed Augmented Category 6 compliant Backward compatible to Category 3, 5, 5e, and 6 Offers mounting flexibility and removable cable strain-relief bar that attaches directly to panel All steel construction ensures panel rigidity and reliable terminations Can be easily mounted to any 19 rack or cabinet High density configuration allows for 24 ports in a 1U rack space Write on window plates for port identification TIA-TSB 155 & 568B.2-10 component compliant ISO 24750 compliant IEEE 802.3an 10GBASE-T link segment (Clause 55.7) compliant when installed with approved cable and patch cords CSA certified Insulation resistance 500 MΩ minimum Dielectric withstand 1000 VAC RMS, AC 60 Hz or 1414 VDC P-P DC current rating 1.5 A per conductor at 20 C ambient de-rated to 0.75 A at 60 C ambient AAXG6A16-UTP AAXG6A24-UTP AAXG6A32-UTP AAXG6A48-UTP AKXG6A16-UTP AKXG6A16-FTP AKXG6A24-FTP AKXG6A32-FTP AKXG6A48-FTP SMP Category 6a Patch Panels Category 6a 10 Gig UTP Patch Panel, UMJ style, 1 RU, 16 port Category 6a 10 Gig UTP Patch Panel, UMJ style, 2 RU, 24 port Category 6a 10 Gig UTP Patch Panel, UMJ style, 2 RU, 32 port Category 6a 10 Gig UTP Patch Panel, UMJ style, 4 RU, 48 port Category 6a 10 Gig UTP Patch Panel, KMJ style, 1 RU, 16 port Category 6a 10 Gig FTP Patch Panel, Shielded KMJ style, 1 RU, 16 port Category 6a 10 Gig FTP High Density Patch Panel, Shielded KMJ style, 1 RU, 24 Port Category 6a 10 Gig FTP Patch Panel, Shielded KMJ style, 2 RU, 32 Port Category 6a 10 Gig FTP Patch Panel, Shielded KMJ style, 2 RU, 48 Port

Patch Panels Copper Closet cc-8 Patch Panels Category 6 When Category 6 was introduced to the market, SMP brought a product offering that was designed to exceed industry expectations and surpass the governing standards. SMP created Category 6 connectivity components that offered patented technology and guaranteed bandwidth performance. SMP s Category 6 patch panels were no exception. Developed to offer true performance, SMP s Category 6 patch panels are assured to meet the standard when verified. Applications TIA/EIA 854 Gigabit Ethernet over Cat 6 Cabling 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 270 Mbps digital video 155/622 Mbps ATM 100 Mbps TP-PMD 100 VG-AnyLan 4 / 16 Mbps Token Ring Voice Category 6 component compliant 610 punch down block ETL Verified to TIA/EIA 568-B.2-1 Cat 6 Power-Safe modular jack contacts SMP patented PCB technology Backward compatible, Cat 3, 5, & 5e Mounting flexibility Removable cable strain-relief bar attaches directly to Panel All steel panel (no plastic frames) ensures panel rigidity and reliable terminations IKON compatible - 12 colors Universal T568A/B wiring for easy installation 6 Port component modules Write-on label fields Rigid Box-Section panel construction Long term application confidence Compliant with power over Ethernet requirement All components made in the U.S. PP12SIX PP1288/110A6 PP2488/110A6 DCC1288/110SIX DCC1688/110SIX DCC2488/110SIX DCC3288/110SIX DCC4888/110SIX DCC6488/110SIX DCC9688/110SIX DCC12088/110SIX DCC1688/110SIX-S DCC2488/110SIX-S DCC3288/110SIX-S DCC4888/110SIX-S ACC2488/110SIX ACC4888/110SIX Axcess 6 Patch Panels Wall Mount Patch Panel, 568A/B wired, 12 port, 89D Bracket Wall Mount Patch Panel, 568A/B wired, 12 port Wall Mount Patch Panel, 568A/B wired, 24 port Rack Mount Patch Panel, 568A/B wired, 12 port, 1 RU Rack Mount Patch Panel, 568A/B wired, 16 port, 1 RU Rack Mount Patch Panel, 568A/B wired, 24 port, 1 RU Rack Mount Patch Panel, 568A/B wired, 32 port, 2 RU Rack Mount Patch Panel, 568A/B wired, 48 port, 2 RU Rack Mount Patch Panel, 568A/B wired, 64 port, 4 RU Rack Mount Patch Panel, 568A/B wired, 96 port, 4 RU Rack Mount Patch Panel, 568A/B wired, 120 port, 5 RU Rack Mount Patch Panel, 16 Port, KMJ Shielded Jacks, 1 RU Rack Mount Patch Panel, 24 Port, KMJ Shielded Jacks, 2 RU Rack Mount Patch Panel, 32 Port, KMJ Shielded Jacks, 2 RU Rack Mount Patch Panel, 48 Port, KMJ Shielded Jacks, 2 RU Rack Mount Patch Panel, Angled, 568A/B wired, 24 port, 1 RU Rack Mount Patch Panel, Angled, 568A/B wired, 48 port, 2 RU

Patch Panels Copper Closet cc-9 Category 5e -110 Style SMP s Category 5e patch panels incorporate SMP s best design and application performance specifications ever. The A5E product line provides unmatched performance in premise connectivity. Designed for the most demanding network applications, SMP created Category 5e patch panels that offer customers the highest level of headroom to any Category 5e link or channel. Comfortably exceeds EIA/TIA 568-B.2 Category 5e standards ISO/IEC11801 compliant Patented PC Board Technology Constructed of cold rolled steel for durability Rigid design provides solid frame for hi-impact punching tools Universal TIA 568A/B wiring configuration IDC s withstand 200 wire insertions Write on label fields IKON compatible 12 colors Cable strain relief bar provided All components made in U.S. Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband video 270 Mbps digital video 155 / 622 Mbps ATM 100 Mbps TP-PMD 100 VG AnyLan 4 / 16 Mbps Token Ring Voice PP12A5E PP1288/110A5E PP2488/110A5E DCC1288/110A5E DCC1688/110A5E DCC2488/110A5E DCC3288/110A5E A5E Patch Panels Wall Mount Patch Panel, 568A/B wired, 12 port, with 89D bracket Wall Mount Patch Panel, 568A/B wired, 12 port Wall Mount Patch Panel, 568A/B wired, 24 port Rack Mount Patch Panel, 568A/B wired, 12 port, 1 RU Rack Mount Patch Panel, 568A/B wired, 16 port, 1 RU Rack Mount Patch Panel, 568A/B wired, 24 port, 1 RU Rack Mount Patch Panel, 568A/B wired, 32 port, 2 RU DCC4888/110A5E DCC6488/110A5E DCC9688/110A5E DCC12088/110A5E ACC2488/110A5E ACC4888/110A5E Rack Mount Patch Panel, 568A/B wired, 48 port, 2 RU Rack Mount Patch Panel, 568A/B wired, 64 port, 4 RU Rack Mount Patch Panel, 568A/B wired, 96 port, 4 RU Rack Mount Patch Panel, 568A/B wired, 120 port, 5 RU Rack Mount Patch Panel, Angled, 568A/B wired, 24 port, 1 RU Rack Mount Patch Panel, Angled, 568A/B wired, 48 port, 2 RU

Patch Panels Copper Closet cc-10 Category 5e - Shielded 110 Style SMP s shielded Category 5e patch panels provide superior performance with an extra sense of security. A removable cover protects against external noise and wireless technologies while also offering easy access for termination. Just like all A5E patch panels by SMP, performance is designed to exceed EIA/TIA 568-B.2 Category 5e standards. Comfortably exceeds EIA/TIA 568-B.2 Category 5e standards ISO/IEC11801 compliant Fully shielded RJ45 jacks Patented PC Board Technology Rigid design provides solid frame for hi-impact punching tools 110 Style punch down for easy terminations IDC s withstand 200 wire insertions Write on label fields IKON compatible 12 colors Removable cable strain-relief bar attaches directly to Panel Removable cover for protection from EMI and RFI emissions All components made in U.S. Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband video 270 Mbps digital video DCC1688/110S01 DCC1688/110S03 DCC2488/110SAB DCC2488/110S6-01 A5E Shielded Patch Panels 155 / 622 Mbps ATM 100 Mbps TP-PMD 100 VG AnyLan 4 / 16 Mbps Token Ring Voice Rack Mount Patch Panel, Shielded 110-style, 568B wired, 8 port modules, 16 port, 1 RU Rack Mount Patch Panel, Shielded 110-style, 568A wired, 8 port modules, 16 port, 1 RU Rack Mount Patch Panel, Shielded, 110 style, 568A/B wired, 8 port modules, 24 Port, 1 RU Rack Mount Patch Panel, Shielded 110-style, 568B wired, 6 port modules, 24 port, 1 RU Voice Grade Telco The same cross-connect solutions available for Ethernet applications are also available for PBX equipment. For these applications, SMP offers Voice Grade Telco Patch Panels which break out to 24-RJ45 jacks. Customers can easily patch their phone system into the permanent link by simply using patch cords and open ended cable assemblies punched down to a 110 block, 66-block, or 110 patch panel. Patented PC Board Technology Constructed of extruded aircraft grade aluminum 25 Pair Telco connectors allow for quick connects and easy installations Write on label fields IKON compatible 12 colors All components made in U.S. DCC2462/2502 DCC2464/2502 DCC2482/2502 Voice Grade Telco Patch Panels Rack Mount Patch Panel, Telco Interface panel, 6x2, USOC, 24 Port Rack Mount Patch Panel, Telco Interface panel, 6x4, USOC, 24 Port Rack Mount Patch Panel, Telco Interface panel, 8x2, USOC, 24 Port

Patch Panels Copper Closet cc-11 Gigabit Ethernet Telco High speed data connections are essential for keeping pace with today s business climate. SMP took this into consideration when developing patch panels that offered 1000BASE-T Gigabit Ethernet performance. Not only does the performance exceed industry standards, SMP s Gigabit Ethernet Patch Panels are 100% component tested in the factory guaranteeing the customer worry-free installations. Exceeds EIA/TIA 568-B.2 specifications ISO/IEC11801 compliant Patented PC Board Technology All steel construction for durability All plastic components are high impact self-extinguishing, rated 94V-0 Each female Telco connector is split out to 6 RJ45 ports wired for 1000BASE-T applications Fast and easy installations Write on label fields IKON compatible 12 colors Fully adjustable cable management support bar and bend radius requirements All components made in U.S. Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband video 155 / 622 Mbps ATM 100 Mbps TP-PMD 100 VG Any LAN 4 / 16 Mbps Token Ring Voice PP1288/25V03 PP1288/25V01 PP2488/25V03 PP2488/25V01 DCC24A/GBASET21 DCC24B/GBASET21 DCC48A/GBASET21 DCC48B/GBASET21 DCC2488/25S-01 ACC2488/25V01 ACC4888/25V01 Gigabit Ethernet Patch Panels Wall Mount Patch Panel, Gigabit Telco, 568A wired, 12 Port Wall Mount Patch Panel, Gigabit Telco, 568B wired, 12 Port Wall Mount Patch Panel, Gigabit Telco, 568A wired, 24 Port Wall Mount Patch Panel, Gigabit Telco, 568B wired, 24 Port Rack Mount Patch Panel, Gigabit Telco, 568A wired, 24 Port with cover Rack Mount Patch Panel, Gigabit Telco, 568B wired, 24 Port with cover Rack Mount Patch Panel, Gigabit Telco, 568A wired, 48 Port with cover Rack Mount Patch Panel, Gigabit Telco, 568B wired, 48 Port with cover Rack Mount Patch Panel, Shielded Gigabit Telco, 568B wired, 24 Port with cover Rack Mount Patch Panel, Angled, Gigabit Telco, 568B wired, 24 port, 1 RU Rack Mount Patch Panel, Angled, Gigabit Telco, 568B wired, 48 port, 2 RU

Patch Panels Copper Closet cc-12 Fast Ethernet Telco SMP was one of the first developers of Category 5e compliant 100BASE-T Patch Panels that support advanced high-density Telco ports. Each female 25-pair Telco connector is split out to 12-RJ45 ports wired for 100BASE-T applications for fast and easy installations. Developed initially for use with Cisco switches, SMP s Fast Ethernet Telco patch panels offer customers a single source solution that guarantees unrivaled 100BASE-T performance. Exceeds EIA/TIA 568-B.2 specifications ISO/IEC11801 compliant Patented PC Board Technology All steel construction for durability All plastic components are high impact self-extinguishing, rated 94V-0 Each female Telco connector is split out to 12 RJ45 ports wired for 100BASE-TX applications Fast and easy installations Write on label fields IKON compatible 12 colors Removable cable strain-relief bar attaches directly to Panel Also available in shielded version All components made in U.S. PP2484/25VEFS100 DCC2484/25V100 DCC3684/25V100 DCC4884/25V100 DCC9684/25V100 DCC4884/25S-100 Applications Fast Ethernet Patch Panels 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband video 270 Mbps digital video 155 / 622 Mbps ATM 100 Mbps TP-PMD 100 VG Any LAN 4 / 16 Mbps Token Ring Voice Wall Mount Patch Panel, Telco, 24 Port Rack Mount Patch Panel, Telco, 24 Port, 2 RU Rack Mount Patch Panel, Telco, 36 Port, 2 RU Rack Mount Patch Panel, Telco, 48 Port, 2 RU Rack Mount Patch Panel, Telco, 96 Port, 4 RU Rack Mount Patch Panel, Shielded Telco, 48 Port, 2 RU

Patch Panels Copper Closet cc-13 Snap In Multi Media Panels A16 A24 A32 Axcess Snap-In Multi-media Patch Panels Rack Mount Empty Patch Panel, UMJ style, 16 Port, 1 RU Rack Mount Empty Patch Panel, UMJ style, 24 Port, 2 RU Rack Mount Empty Patch Panel, UMJ style, 32 Port, 2 RU A48H Rack Mount Empty Patch Panel, UMJ style, 48 Port, High Density 2 RU A48 ACC24U ACC48U AK16 AK24 AK48H AK481U AK16STP AK24STP AK48STP ACC24K Rack Mount Empty Patch Panel, UMJ style, 48 Port, 4 RU Rack Mount Empty Patch Panel, Angled, UMJ style, 24 port, 1 RU Rack Mount Empty Patch Panel, Angled, UMJ style, 48 port, 2 RU Rack Mount Empty Patch Panel, KMJ style, 16 Port, 1 RU Rack Mount Empty Patch Panel, KMJ style, 24 Port, 1 RU Rack Mount Empty Patch Panel, KMJ style, 48 Port, High Density 2 RU Rack Mount Empty Patch Panel, KMJ Style, 48 port, 1RU Rack Mount Empty Patch Panel, KMJ style, Shielded, 16 Port, 1 RU Rack Mount Empty Patch Panel, KMJ style, Shielded, 24 Port, 1 RU Rack Mount Empty Patch Panel, KMJ style, Shielded, 48 Port, 3 RU Rack Mount Empty Patch Panel, Angled, KMJ style, 24 port, 1 RU ACC24KS Rack Mount Empty Patch Panel, Angled, KMJ style, Shielded, 24 port, 1 RU ACC48K Rack Mount Empty Patch Panel, Angled, KMJ style, 48 port, 2 RU ACC48KS Rack Mount Empty Patch Panel, Angled, KMJ style, Shielded, 48 port, 2 RU The ability to be flexible and adaptable to each customer s unique needs has been SMP s speciality for years. With SMP s Snap-In Multi-media patch panels, any combination of UMJ or KMJ style jacks and adapters can be chosen to configure a custom patch panel. All Multi-media patch panels are mountable in any 19 rack. Ports will accommodate any UMJ or KMJ jack or adapter Constructed of extruded aircraft grade aluminum for durability Write on label fields IKON compatible 12 colors Patch Panel Accessories SMP s IKON kits color code patch panels for easy labeling and to meet EIA/TIA 606 port identification requirements. IKON kits may be used to dress up any A5E or Axcess 6 patch panel. Snap-In Multi-media panels and all kits include enough IKONS to color every port with any 9 colors. EIA/TIA color coding SMP color code: Key Telephone Systems Red 03 Network Communications Green 04 Station Blue 05 Second Level Backbone Gray 06 First Level Backbone White 07 Demarcation Point Orange 08 Miscellaneous Yellow 09 Common Equipment Purple 10 Inter-building Backbone Brown 11 IKON Kits IKON1U IKON Kit for 10-24 Ports, 9 color assortment IKON2U IKON Kit for 32-48 Ports, 9 color assortment IKON3U IKON Kit for 64-96 Ports, 9 color assortment IKON5U IKON Kit for up to 120 Ports, 9 color assortment IKONxx IKON Kit, Pack of 100 6-port strips * Replace xx with color code (See chart on left)

Zone Distribution Solutions Copper Closet cc-14 Zone Distribution Solutions Zone Cross Connect SMP s zone distribution solutions optimize any horizontal cabling infrastructure. Through innovative designs, SMP continues to provide zone cross connect solutions that meet every need. Whether using SMP s 6-Port Interconnect Module or the new Spider Zone Module, the convenience and reliability of SMP technology guarantees performance for high speed applications. Zone Interconnect Modules (Field Terminable) ZDIMA5E Zone Interconnect Module, Category 5e, 568A/B wired, 6 port (pictured above) ZDIMSIX6A/B Zone Interconnect Module, Category 6, 568A/B wired, 6 port (not pictured, mounts to an 89D bracket) Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 155 / 622 Mbps ATM 100 Mbps TP-PMD 4 / 16 Mbps Token Ring Voice SMP s Interconnect Module offers the ease and compact design to give customers an alternative to multiple outlets in an office environment. The 6 port module allows for termination between 25-Pair cables to modular RJ45 ports at the workstation, minimizing the need for multiple horizontal cable runs. Universal 568A/B wiring Compact design allows for easy installation Ideal in multiple situations, i.e. under floor, power pole, and multi-port workstations May be factory assembled with cable or field terminated. All components made in the U.S. 25-Pair Zone Distribution Cable Assemblies 25ZD/ - 25-Pair Zone Distribution Cable Assembly Cable Type & Category Wiring Type End Type Length In Feet 5E Cat 5e Riser EP Cat 5e Plenum 6A 568A wired 6B 568B wired TR Telco Right TL Telco Left TS Telco Straight X Blunt End No Connector HR Hydra Right HL Hydra Left HSxx* Hydra Straight *Replace xx with length of legs (12 or 24) Ex: 25ZD/5E6BTS-100 = 25 Pair Cable Assembly, Zone Distribution module to Telco Straight, Cat 5e Riser, 568B wired, 100 Feet

Zone Distribution Solutions Copper Closet cc-15 Zone Distribution Box Perfect for serving multiple remote outlets, SMP s Zone Distribution Box provides an easy connection between a 25-pair cable and six modular ports. Each box is constructed with one female Telco connector and 6-RJ45 jacks, 3 on each side. With its compact design, the Zone Distribution Box can easily be used as a wall mountable mini patch panel for increased cost effectiveness. Available in 568A or 568B wired applications Patented PC Board technology Ideal for multiple situations, i.e. under floor, ceiling, and multi-port workstations Mounts anywhere All components made in the U.S. Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 155 / 622 Mbps ATM 100 Mbps TP-PMD 4 / 16 Mbps Token Ring Voice Zone Distribution Box ZDB6VA01 Zone Distribution Box, 568A wired, 6 Port ZDB6VB01 Zone Distribution Box, 568B wired, 6 Port Zone Distribution Jack Packs Created for completely modular connections, the SMP Jack Pack is ideal for any zone distribution application and can easily be mounted anywhere. With performance that exceeds all standards requirements, the Jack Pack offers a multitude of application solutions. Whether mounting to cable tray for a quick cross connect point or using as a distribution site within an equipment room, the SMP Jack Pack offers guaranteed performance in a compact package. Available for 10/100 or Gigabit Ethernet applications Exceeds EIA/TIA 568A specifications Patented PC Board Technology Compact design Mounts anywhere Also available in shielded All components made in the U.S. ZDIM81225TX ZDIM8625A ZDIM8625B ZDIM8625BS Zone Distribution Jack Packs Zone Distribution Jack Pack, 10/100 RJ45 to Female Telco, 568B wired, 12 Port Zone Distribution Jack Pack, Gigabit RJ45 to Female Telco, 568A wired, 6 port Zone Distribution Jack Pack, Gigabit RJ45 to Female Telco, 568B wired, 6 Port Zone Distribution Jack Pack, Gigabit Shielded RJ45 to Female Telco, 568B wired, 6 Port

Zone Distribution Solutions Copper Closet cc-16 Zone Spider Distribution Solutions (for cable tray) SMP s new Zone Spider Distribution Solutions for cable tray mounting provide a convenient means to access copper network cross connect points. The copper modules are manufactured with Telco PCB assemblies factory installed for fast and easy installations. Simply insert the Telco cable assembly and patch cords and the job is finished. These modules allow customers to take the distribution point out of the equipment room to where it s needed, while giving installers less installation time and a reduction in cabling costs. Available for 10/100 or Gigabit Ethernet applications Exceeds EIA/TIA 568-B.2 specifications ISO/IEC11801 compliant Patented PC Board Technology Expandable design will fit tray widths from 12" to 18" Easy installations and additions without disturbing previously installed cable Reduces the number of cables and congestion in a cable tray All components made in the U.S. Applications 1000BASE-T Gigabit Ethernet (only on Gigabit Ethernet module) 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 155 / 622 Mbps ATM 100 Mbps TP-PMD 4 / 16 Mbps Token Ring Voice Zone Spider Distribution Solution (for cable tray) ZDMB12/25V100 Zone Distribution Module, 10/100 Telco, 12 Port ZDMB12A/GBASET21 ZDMB12B/GBASET21 Zone Distribution Module, Gigabit Telco, 568A wired, 12 Port Zone Distribution Module, Gigabit Telco, 568B wired, 12 Port

Cable Assemblies Copper Closet cc-17 Cable Assemblies As the industry demands systems with faster installation times and less network interruption, SMP developed a modular solution to meet those specific communications cabling needs. Using 25-pair Telco cable assemblies coupled with SMP Telco patch panels, SMP created a solution that is as simple as Plug-and-Play. SMP s 25-pair Telco cable assemblies make moves/adds/ changes more flexible, air passages less restricted and data throughput rates uninterrupted. Each 25-pair assembly is designed to support new interface technology of leading switch manufacturers. Constructed to exceed EIA/TIA Category 5e specifications, SMP s Telco assemblies offer guaranteed Gigabit throughput with 100% component testing to their specified protocols. From rack mount to zone distribution, SMP s PowerSum- Rated 5e assemblies offer a wide variety of options to meet 10/100 and Gigabit Ethernet solutions. Exceeds EIA/TIA Category 5e specifications Utilizes UL certified Cat 5e 25-pair cable 100% component testing for guaranteed Gigabit Ethernet performance All Telco to Telco assemblies are male-to-male All Hydra assemblies are manufactured with precise leg measurements to span 19 racks or a stand alone switch Works with high-density 48 port blades 50-pin Telco connectors available in 120 or 180 angles Available with right, left, or straight connectors plenum or non-plenum Shielded 25-pair cable assemblies also available Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 155 Mbps ATM 100 Mbps TP-PMD 100 VG AnyLAN 4/16 Mbps Token Ring Voice Telco to Telco Cable Assemblies 25-Pair Telco to Telco Cable Assemblies 25PA/ - - - 25-Pair Telco to Telco Cable Assembly End Type End Type Cable Type & Category Length In Feet TR Telco Right TR Telco Right 5E Cat 5e Riser TL Telco Left TL Telco Left EP Cat 5e Plenum TS Telco Straight TS Telco Straight X Blunt End No Connector Ex: 25PA/TR-TR-5E-100 = 25 Pair Cable Assembly with Telco Right to Telco Right, Cat 5e Riser, 100 Feet

Cable Assemblies Copper Closet cc-18 Hydra Cable Assemblies: 25-Pair Telco to Gigabit Hydra Cable Assemblies (6 Legs) 25PA/ 6-25-Pair Telco to Hydra Cable Assembly End Type End Type Cable Type & Category Length In Feet TR Telco Right HR Hydra Right 5E Cat 5e Riser TL Telco Left HL Hydra Left EP Cat 5e Plenum TS Telco Straight HSxx* Hydra Straight X Blunt End - No Connector *Replace xx with length of legs (12 or 24) Ex: 25PA/TRHS1265E-025 = 25 Pair Cable Assembly with Telco Right to Gigabit Hydra Straight, 6 Legs at 12", Cat 5e Riser, 25 Feet * Must use B-wired Telco panel with 6 Leg Gigabit Hydra Assemblies 25-Pair Telco to 10/100 Hydra Cable Assemblies (12 Legs) 25PA/ - - 25-Pair Telco to Hydra Cable Assembly End Type End Type Cable Type & Category Length In Feet TR Telco Right HR Hydra Right 5E Cat 5e Riser TL Telco Left HL Hydra Left EP Cat 5e Plenum TS Telco Straight HSxx* Hydra Straight X Blunt End - No Connector *Replace xx with length of legs (12 or 24) Ex: 25PA/TRHS24-5E-050 = 25 Pair Cable Assembly with Telco Right to 10/100 Hydra Straight, 12 Legs at 24", Cat 5e Riser, 50 Feet

Category 6 Patch Cords Copper Closet cc-19 Category 6 Patch Cords SMP s Category 6 patch and workstation cords are the perfect compliment to any SMP Axcess 6 copper system. SMP s Axcess 6 cords offer Onyx Grip, a strain relief solution that ensures mechanical and electrical stability during and after adds, moves or changes. In addition, Axcess 6 patch cords utilize straight-thru pair orientation and are 100% component performance tested. SMP s test methods have formed the basis for standard patch cord component testing methods in TIA/EIA 568-B.2-1 Category 6 standards ensuring that the Axcess 6 patch cord will guarantee performance. 100% component performance tested Exceeds TIA/EIA 568B.2-1 specifications Customizable lengths and colors available Shielded version available PCSIXxxyy PCSIXxxByy PCSIXSxxByy Axcess 6 Patch Cords Category 6 patch cord without boot Category 6 patch cord with boot Category 6 shielded patch cord with boot *Replace xx with length in feet; replace yy with color code (06) gray, (09) yellow ** Ex: = PCSIX03B09 Category 6 patch cord, 3 feet, with boot, yellow Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 155/622 Mbps ATM 100 Mbps TP-PMD 4/16 Mbps Token Ring Voice All applications developed for operation over Category 6 or class E cabling Category 5e Patch Cords SMP s Category 5e patch cords are manufactured to strict standards, ensuring adherence to TIA/EIA 568-B.2 component performance requirements. After all, SMP s test methods for patch cord component testing methods have helped form the basis for the Category 5e standards. This commitment to guaranteed performance is what makes SMP s A5E patch cords an excellent addition to any SMP Category 5e structured cabling system 100% component performance tested Exceeds TIA/EIA 568-B.2 Category 5e requirements Customizable lengths and colors available Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 155/622 Mbps ATM PC5EBxxyy PC5EBxxByy A5E Patch Cords 100 Mbps TP-PMD 4/16 Mbps Token Ring Voice All applications developed for operation over Category 5e or class D cabling Category 5e patch cord without boot Category 5e patch cord with boot *Replace xx with length in feet; replace yy with color code (06) gray, (09) yellow ** Ex: = PC5EB03B09 Category 5e patch cord, 3 feet, with boot, yellow

110 Wiring Products Copper Closet cc-20 110 Wiring Products Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 155/622/1000 Mbps ATM 100 Mbps TP-PMD 100 VG AnyLAN 4/16 Mbps Token Ring Voice Whether installing a Category 5e or Category 6 system, SMP offers a complete solution with 110 Block connectivity. SMP s 110 product line offers easy network cabling consolidation and quick transitions with maximum performance. From wall mount to rack mount 110 blocks and cable organizers, SMP s selection of products offer customers a solid backbone for an exceptional structured wiring solution. Exceeds industry standards for Category 5e and Category 6 specifications, respectively 110 Blocks may be field terminated with 22-26 AWG solid wire Color coded pairs for easy identification Designation labels included Order with legs when back case routing Order without legs when depth is limited or when frame mounting 110 Block may be kitted for easy installations

110 Wiring Products Copper Closet cc-21 Category 5e 110 Wiring Products C410 C510 DCC50/110EFS* DCC50/110EFSL* DCC100/110EFS* DCC100/110EFSL* DCC300/110EFS* DCC300/110EFSL* DCC300/110EFSTWB DCC300/110EFSTEXP DCC100/110EFSRK DCC200/110EFSRK DCC300/110EFSRK Category 5e 110 Wiring Products Category 5e 110 C-4 Connector Blocks Category 5e 110 C-5 Connector Blocks Category 5e Wall Mount 110 Block, 50 Pair, Without Legs Category 5e Wall Mount 110 Block, 50 Pair, With Legs Category 5e Wall Mount 110 Block, 100 Pair, Without Legs Category 5e Wall Mount 110 Block, 100 Pair, With Legs Category 5e Wall Mount 110 Block, 300 Pair, Without Legs Category 5e Wall Mount 110 Block, 300 Pair, With Legs Category 5e Wall Mount 110 Tower, 300 Pair, Mounting Frame Category 5e Wall Mount 110 Tower, 300 Pair, Extension Mounting Frame Category 5e Rack Mount 110 Block, Kitted 100 Pair Category 5e Rack Mount 110 Block, Kitted 200 Pair Category 5e Rack Mount 110 Block, Kitted 300 Pair *Place a K at the end of the part number for a complete kit. Ex: DCC48/110EFSLK = Category 5e Wall Mount 110 Block with Legs and Connectors Category 6 110 Wiring Products Category 6 110 Wiring Products C64-10 Category 6 110 C-4 Connector Blocks DCC48/110SIX* DCC48/110SIXL* DCC96/110SIX* DCC96/110SIXL* DCC288/110SIX* DCC288/110SIXL* DCC288/110SIXTWB DCC288/110SIXTEXP Category 6 Wall Mount 110 Block, 48 Pair, Without Legs Category 6 Wall Mount 110 Block, 48 Pair, With Legs Category 6 Wall Mount 110 Block, 96 Pair, Without Legs Category 6 Wall Mount 110 Block, 96 Pair, With Legs Category 6 Wall Mount 110 Block, 288 Pair, Without Legs Category 6 Wall Mount 110 Block, 288 Pair, With Legs Category 6 Wall Mount 110 Tower, 288 Pair, Mounting Frame Category 6 Wall Mount 110 Tower, 288 Pair, Extension Mounting Frame DCC96/110SIXRK Category 6 Rack Mount 110 Block, Kitted 96 Pair DCC192/110SIXRK Category 6 Rack Mount 110 Block, Kitted 192 Pair DCC288/110SIXRK Category 6 Rack Mount 110 Block, Kitted 288 Pair *Place a K at the end of the part number for a complete kit. Ex: DCC48/110SIXLK = Category 6 Wall Mount 110 Block with Legs and Connectors Cable Organizers COH110 COH110L DCC300/110EFSTHVCM DCC300/110EFSTVCM COH110R 110 Block Cable Organizers Wall Mount Horizontal Cable Organizer without Legs Wall Mount Horizontal Cable Organizer with Legs Wall Mount Vertical Cable Organizer, For 110 Tower Wall Mount Vertical Cable Organizer Extension, For 110 Tower Rack Mount Horizontal Cable Organizer, 19" Width

workstation

workstation Contents: WS-2 UMJ Jacks and Adapters WS-6 UMJ Faceplates WS-10 KMJ Jacks and Adapters WS-14 KMJ Faceplates WS-17 Wall plates and Connectors WS-18 Surface Mount Boxes WS-19 Multi-media Boxes To offer a comprehensive network infrastructure, SMP created a complete line of connectivity components to take guaranteed SMP performance from the equipment room to the desktop. As with all SMP products, performance is always the priority. Every SMP jack, whether our proprietary Bezel design or the standard Keystone version, are 100% tested to stringent performance standards and all are completely backward compatible to lower category performance levels. This attention to detail makes SMP s jacks and outlet solutions a clear answer to constructing the perfect structured cabling system, from telecom room to the desk. SMP s workstation product line features a broad range of quality modular products to meet any structured cabling application. In addition to delivering unsurpassed performance and patented SMP technology, SMP s workstation solutions provide customers a durable aesthetic appeal to fit any desktop scenario. And in order to fit any setting, our workstation products offer the widest ranges of jacks, adapters, faceplates, surface-mount boxes, and station cords in a variety of colors and styles. Whether using SMP s unique Universal Modular (Bezel) components or the industry standard Keystone Modular design, SMP has the workstation solution that will give customers exceptional performance and flexibility to meet any desktop configuration.

UMJ Jacks and Adapters workstation WS-2 UMJ Jacks and Adapters SMP s Universal Modular Jack offers a unique locking bezel system that allows for easy port identification and labeling at the work center. This jack and bezel combination create a superior hold on the faceplate or box, making it virtually impossible to accidentally remove the jack. More than the aesthetic appeal and convenience the UMJ jack offers, it is designed to support emerging high performance platforms that exceed category specifications. Category 6a Outlet Jacks (See Copper Closet, page CC-6) Category 6 Jacks SMP s Axcess 6 jacks are world-class performers with patented printed circuit board technology to provide true Category 6 component performance on all pair combinations. With a standard 110 style punch down termination, SMP s Category 6 UMJ style jacks are manufactured to comply with TIA component performance requirements and are ETL Verified to TIA/EIA 568-B.2-1 Cat 6 standards. Each UMJ Cat 6 jack utilizes universal T568A/B wiring and is backward compatible with Category 3, 5, and 5e. Meets IEC 60603-7 requirements 110 style IDC contacts meet TIA/EIA 568-B.2 requirements ETL Verified to TIA/EIA 568-B.2-1 Cat 6 Backward compatible, Cat 3, 5, and 5e compliant Full 6-position, modular plug compatible with bezel Universal T568A/B wiring for easy installation TERMA Grip conductor & jacket retention for easy wiring Available with 20 labeling and color options Secure mounting locks jack into faceplate Fits all SMP Axcess faceplates and surface mount boxes Applications TIA/EIA 854 Gigabit Ethernet over Cat 6 Cabling 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 270 Mbps digital video 155/622 Mbps ATM 100 Mbps TP-PMD 100 VG-AnyLan 4/16 Mbps Token Ring Voice UMJA6 UMJA6xx UMJA650xx Axcess 6 UMJ Jacks Axcess 6 UMJ Category 6 Jack, Universal 568A/B wiring, no bezel Axcess 6 UMJ Category 6 Jack, Universal 568A/B wiring, colored bezel Axcess 6 UMJ Category 6 Jack, Universal 568A/B wiring, 50 pack * Replace xx with color code see color code chart on page WS-5

UMJ Jacks and Adapters Workstation WS-3 Category 5e Jacks SMP s Axcess Category 5e Bezel jacks utilize SMP s patented PC Board technology to exceed the ANSI/TIA/ EIA 568-B.2 category 5e requirements with headroom to spare. For a more cost effective solution, SMP also offers a Leadframe Bezel jack that utilizes SMP s patented Leadframe technology. 110 style punch downs accommodate 22 AWG solid through 26 AWG solid and 24 AWG stranded conductors and each SMP jack offers universal T568A/B wiring and performance enhancements to exceed industry standards. 110 style IDC contacts meet TIA/EIA 568-B.2 requirements Backward compatible, Cat 3, and Cat 5 compliant Full 6-position, modular plug compatible with bezel Universal T568A/B wiring for easy installation TERMA Grip conductor & jacket retention for easy wiring Available with 20 labeling and color options Secure mounting locks jack into faceplate Fits all SMP Axcess faceplates and surface mount boxes Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 155 / 622 Mbps ATM 100 Mbps TP-PMD 4 / 16 Mbps Token Ring Voice UMJA5E UMJA5Exx UMJA5E50xx A5E UMJ Jacks A5E UMJ Category 5e Jack, Universal 568A/B wiring, no bezel A5E UMJ Category 5e Jack, Universal 568A/B wiring, colored bezel A5E UMJ Category 5e Jack, Universal 568A/B wiring, 50 pack UMJVL8A/B A5E UMJ Category 5e Leadframe Jack, Universal 568A/B wiring, no bezel UMJVL8A/Bxx A5E UMJ Category 5e Leadframe Jack, Universal 568A/B wiring, colored bezel UMJVL8A/B50xx A5E UMJ Category 5e Leadframe Jack, Universal 568A/B wiring, 50 pack * Replace xx with color code see color code chart on page WS-5 Category 3 Voice Grade Jacks SMP s Category 3 Jacks offer customers SMP s patented Leadframe technology for a cost effective solution to voice grade systems. 110 style IDC connectors on back for 26, 24, and 22 AWG solid conductors, make SMP s Category 3 jacks easy to install and offer unmatched performance. Add the locking color/ icon bezel to provide distinctive jack identification. 110 style IDC contacts TERMA Grip conductor & jacket retention for easy wiring Available with 20 labeling and color options Secure mounting locks jack into faceplate Fits all SMP Axcess faceplates and surface mount boxes UMJL06U UMJL06Uxx UMJL08U UMJL08Uxx UMJL08A/B UMJL08A/Bxx Axcess UMJ Category 3 Jacks Axcess Jack USOC 6x6 Leadframe, 110 style, no bezel Axcess Jack USOC 6x6 Leadframe, 110 style, colored bezel Axcess Jack USOC 8x8 Leadframe, 110 style, no bezel Axcess Jack USOC 8x8 Leadframe, 110 style, colored bezel Axcess Jack 568A/B, 8x8 Leadframe, 110 style, no bezel Axcess Jack 568A/B, 8x8 Leadframe, 110 style, colored bezel * Replace xx with color code see color code chart on page WS-5

UMJ Jacks and Adapters workstation WS-4 UMJ Adapters APBLK01 AARCA01 For multi-media options, SMP created a complete line of data, video, and audio ports for fiber, copper, coaxial and speaker cables. Combined with the multi-color, low-profile recessed Bezels, SMP s UMJ style adapters are a flexible alternative for port identification, no matter what the application. Available with 12 color options Secure mounting locks adapters into faceplate Fits all SMP Axcess faceplates and surface mount boxes AASTM01 AASCM01 AABNC01 AAF01 AASCMxx AASCSxx AASTMxx AASTSxx AADLCMxx AAFxx AABNCxx AASVHSxx AARCAxx APBLKxx Axcess UMJ Adapters Axcess UMJ snap-in SC Multi-mode adapter Axcess UMJ snap-in SC Single-mode adapter Axcess UMJ snap-in ST Multi-mode adapter Axcess UMJ snap-in ST Single-mode adapter Axcess UMJ snap-in Dual LC Multi-mode adapter Axcess UMJ snap-in F coupler Axcess UMJ snap-in BNC coupler Axcess UMJ snap-in Super VHS coupler Axcess UMJ snap-in RCA adapter with solder tab Axcess UMJ snap-in Blank Bezel (20 pack) * Replace xx with color code see color code chart on page WS-5

UMJ Jacks and Adapters Workstation WS-5 Bezels Whether ordering kitted or separate for field installations, SMP s unique bezel system offers an easy and affordable alternative for desktop port identification. Bezels may be ordered blank or labeled and with a multitude of colors to choose from. The flexibility and variety of combinations for workstation labeling are endless. 12 different color and 4 labeling options Standard package of bezel is 20 per bag Can be easily customized or kitted with jacks/ adapters for special orders Available for 6 or 8 position plugs Locks the jack or adapter into the faceplate Shuttered bezels available for dust protection Axcess UMJ Bezels B E - - Optional Optional Position Color Text Options 06 = 6 Position * See color V = Voice K = Keyed 08 = 8 Position chart below D = Data S = Shuttered F = Fax Blank = None M = Modem Blank = None Axcess UMJ Color Code Chart Code Color Code Color 00 Electrical Ivory 07 White 01 Office White 08 Orange 02 Black 09 Yellow 03 Red 10 Purple 04 Green 11 Brown 05 Blue 12 Bright White 06 Data Gray

UMJ Faceplates workstation WS-6 UMJ Faceplates SMP s Workstation solution isn t complete without our Axcess faceplates. Available in a multitude of configurations and designed to meet any application, the Axcess faceplates for UMJ style jacks and adapters offer a convenient and aesthetically appealing solution for any desktop purpose. Commercial Faceplates Commercial grade faceplates accept any UMJ Bezel jack or adapter ID windows include write-on labels and plastic protective covers Slotted mounting holes simplify installation Available in most popular colors Catalog Number Axcess UMJ Commercial Faceplates FPSR01xx Single gang commercial faceplate, recessed UMJ, 1 port FPSR02xx Single gang commercial faceplate, recessed UMJ, 2 port FPSR03xx Single gang commercial faceplate, recessed UMJ, 3 port FPSR04xx Single gang commercial faceplate, recessed UMJ, 4 port FPSR06xx Single gang commercial faceplate, recessed UMJ, 6 port DP01xx DP02xx DP03xx DP04xx DP06xx Double gang commercial faceplate, UMJ, 1 port Double gang commercial faceplate, UMJ, 2 port Double gang commercial faceplate, UMJ, 3 port Double gang commercial faceplate, UMJ, 4 port Double gang commercial faceplate, UMJ, 6 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White Commercial grade faceplates accept any UMJ Bezel jack or adapter Vertical ID windows provide easier identification changes and removal of plate for jack access ID windows include write-on labels and plastic protective cover Available in most popular colors Axcess UMJ Vertical Window Commercial Faceplates FPRSV03xx Single gang commercial faceplate, vertical window UMJ, 3 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White Angled faceplates reduce strain on existing station cables ID windows include write-on labels and plastic protective cover Available in most popular colors Axcess UMJ Commercial Angled Faceplates FP04Axx DP08Axx Single gang commercial faceplate, angled UMJ, 4 port Double gang commercial faceplate, angled UMJ, 8 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White

UMJ Faceplates Workstation WS-7 Residential Faceplates Smooth surface faceplates accept any UMJ Bezel jack or adapter Bezel openings are recessed for neater appearance Available in most popular colors FPR01xx FPR02xx FPR03xx FPR04xx FPR06xx SDP01xx SDP02xx SDP03xx SDP04xx SDP06xx Axcess UMJ Residential Faceplates Single gang smooth faceplate, UMJ, 1 port Single gang smooth faceplate, UMJ, 2 port Single gang smooth faceplate, UMJ, 3 port Single gang smooth faceplate, UMJ, 4 port Single gang smooth faceplate, UMJ, 6 port Double gang smooth faceplate, UMJ, 1 port Double gang smooth faceplate, UMJ, 2 port Double gang smooth faceplate, UMJ, 3 port Double gang smooth faceplate, UMJ, 4 port Double gang smooth faceplate, UMJ, 6 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White Stainless Steel Faceplates Stainless Steel faceplates accept any UMJ Bezel jack or adapter Corrosion resistant May be ordered with tamper proof screws Catalog Number FP01SS FP02SS FP03SS FP04SS FP06SS Axcess UMJ Stainless Steel Faceplates Single gang stainless steel faceplate, UMJ, 1 port Single gang stainless steel faceplate, UMJ, 2 port Single gang stainless steel faceplate, UMJ, 3 port Single gang stainless steel faceplate, UMJ, 4 port Single gang stainless steel faceplate, UMJ, 6 port DP01SS DP02SS DP03SS DP04SS DP06SS Double gang stainless steel faceplate, UMJ, 1 port Double gang stainless steel faceplate, UMJ, 2 port Double gang stainless steel faceplate, UMJ, 3 port Double gang stainless steel faceplate, UMJ, 4 port Double gang stainless steel faceplate, UMJ, 6 port

UMJ Faceplates workstation WS-8 Office Furniture Faceplates Fits most popular office furniture including Herman Miller and Steelcase Available in gray or black Attractive and functional Axcess UMJ Office Furniture Faceplates Cut Out Dimensions Office Furniture Compatible Herman Miller Steel case Haworth Hon Other FAP3xx Furniture faceplate, 3 port 2.65 W x 1.35 H X X X FAP302-HM Furniture faceplate, 3 port 2.98 W x 1.88 H X FAP4xx Furniture faceplate, 4 port 5.25 W x 1.37 H X X * Replace xx with color choice: 02 = Black or 06 = Data Gray Front Axcess Faceplates Custom configurable to accommodate UMJ and KMJ style jacks and adapters Accommodates three individual modules for ultimate flexibility Additional cable storage depth Slim design Front Axcess UMJ & KMJ Front Axcess Faceplates FP-FAOR-xx FAOC-1A-xx FAOC-2A-xx FAOC-B-xx FAOC-VGA1-xx FAOC-1K-xxS FAOC-2K-xxS FP-FAU222-xx FP-FAU221-xx FP-FAU220-xx FP-FAU211-xx FP-FAU210-xx FP-FAU200-xx FP-FAU111-xx Front Axcess faceplate, single gang ring Front Axcess UMJ faceplate, 1 port insert Front Axcess UMJ faceplate, 2 port insert Front Axcess faceplate, blank insert Front Axcess faceplate, 1 VGA insert Front Axcess KMJ faceplate, 1 port insert Front Axcess KMJ faceplate, 2 port insert Front Axcess faceplate kit, (3) 2 port UMJ inserts Front Axcess faceplate kit, (2) 2 port UMJ inserts, (1) 1 port UMJ insert Front Axcess faceplate kit, (2) 2 port UMJ inserts, (1) blank insert Front Axcess faceplate kit, (1) 2 port UMJ insert, (2) 1 port UMJ inserts Front Axcess faceplate kit, (1) 2 port UMJ insert, (1) 1 port UMJ insert, (1) blank insert Front Axcess faceplate kit, (1) 2 port UMJ insert, (2) blank inserts Front Axcess faceplate kit, (3) 1 port inserts FP-FAU110-xx Front Axcess faceplate kit, (2) 1 port inserts, (1) blank insert FP-FAU100-xx Front Axcess faceplate kit, (1) 1 port insert, (2) blank inserts * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White

UMJ Faceplates Workstation WS-9 Divax Faceplates Designed to blend in with any home or office décor Completely compatible with DIVAX single-gang rectangular electrical plates Mounts in any standard electrical box Can be used with all DIVAX type switches Smooth, clean surface Ultimate flexibility FDRxx FDBxx FDUxx FD2Uxx FD3Uxx FDFxx FD2Fxx Axcess UMJ Divax Style Faceplates Divax faceplate, UMJ, single gang ring Divax faceplate, UMJ, blank insert Divax faceplate, UMJ, 1 port Axcess insert Divax faceplate, UMJ, 2 port Axcess insert Divax faceplate, UMJ, 3 port Axcess insert Divax faceplate, UMJ, 1 port Co-ax insert Divax faceplate, UMJ, 2 port Co-ax insert * Replace xx with color choice: 00 = Electrical Ivory, 01=White, 07 = White or 12=Bright White Office Furniture Faceplates Fits inside any standard electrical faceplate Accommodates two UMJ ports A106xx Axcess UMJ Receptacle Insert UMJ Receptacle Insert, 2 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, or 07 = White

KMJ Jacks and Adapters workstation WS-10 KMJ Jacks and Adapters As an alternative to SMP s unique UMJ jacks and adapters, SMP has created a Keystone product line to meet the demands of industry standard installations. SMP s Keystone jacks may have been designed to keep pace with standard installations, but in keeping with the SMP guarantee of excellence, every KMJ jack was created with SMP s superior performance in mind. Each Keystone Modular Jack is component compliant to Category 3, Category 5e, and Category 6 standards and exceeds their respective category specifications. All KMJ jacks offer universal T568A/B wiring and 110 style punch downs for easy installations, making SMP s KMJ product line a guaranteed connection. Category 6a Outlet Jacks (See in Copper Closet section 2-6) Category 6 Jacks SMP s KMJ jacks offer the same great printed circuit board technology that the UMJ jacks do to provide best-in-class Category 6 component performance. With standard 110 style terminations, SMP s Category 6 KMJ jacks are ETL verified to TIA/EIA 568-B.2-1 Category 6 specifications and are backward compatible to Category 3. ETL Verified to TIA/EIA 568-B.2-1 Cat 6 Category 6 component compliant Mounting flexibility Large, easy to read color code labels Universal T568A/B wiring for easy installation Long term application confidence Compliant with power over Ethernet requirements Backward compatible, Cat 3, 5, & 5e compliant TERMA Grip conductor and jacket retention for easy wiring Fits all SMP Keystone faceplates and surface mount boxes Applications TIA/EIA 854 Gigabit Ethernet over Cat 6 Cabling 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video KMJA6xx KMJA650xx KMJA602S KMJ Category 6 Jacks 270 Mbps digital video 155/622 Mbps ATM 100 Mbps TP-PMD 100 VG-AnyLan 4 / 16 Mbps Token Ring Voice KMJ Category 6 jack, Universal 568A/B wiring KMJ Category 6 jack, Universal 568A/B wiring, 50 pack KMJ Category 6 shielded jack, slimline, Universal 568A/B wiring * Replace xx with color code see color code chart on page WS-11

KMJ Jacks and Adapters Workstation WS-11 Category 5e Jacks The SMP Category 5e Keystone Modular Jack is a great alternative for high-density applications. Featuring a lower profile and a snap-in design, the KMJ Category 5e jacks by SMP offer exceptional performance that exceeds industry standards. Offering Universal T568A/B wiring and component compliance to Cat 5e specifications, these Keystone jacks may be ordered with SMP s patented PC board technology or in a leadframe configuration for cost effective solutions. 110 style IDC contacts meet TIA/EIA 568-B.2 requirements Backward compatible, Cat 3, and Cat 5 compliant Universal T568A/B wiring for easy installation TERMA Grip conductor & jacket retention for easy wiring Available in 12 color options Fits all SMP Keystone faceplates and surface mount boxes Applications 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Broadband Video 270 Mbps digital video 155 / 622 Mbps ATM 100 Mbps TP-PMD 4 / 16 Mbps Token Ring Voice KMJA5Exx KMJA5E50xx KMJVL8A/Bxx KMJVL8A/B50xx KMJVL8A/B02S KMJ Category 5e Jacks KMJ Category 5e Jack, Universal 568A/B wiring KMJ Category 5e Jack, Universal 568A/B wiring, 50 pack KMJ Category 5e Leadframe Jack, Universal 568A/B wiring KMJ Category 5e Leadframe Jack, Universal 568A/B wiring, 50 pack KMJ Category 5e Leadframe Shielded Jack, Universal 568A/B wiring * Replace xx with color code see color code chart below KMJ Color Code Chart Code Color Code Color 00 Electrical Ivory 07 White 01 Office White 08 Orange 02 Black 09 Yellow 03 Red 10 Purple 04 Green 11 Brown 05 Blue 12 Bright White 06 Data Gray

KMJ Jacks and Adapters workstation WS-12 KMJ Feed-Through Cat 5e Jack SMP s Category 5e Feed-through Jack offers exceptional connectivity and workstation versatility. KMJ5EFT02 KMJ Category 5e Feed-Through Jacks KMJ Category 5e Jack, Feed-through, Black Category 3 Voice Grade Jacks For voice grade applications, SMP offers a Keystone Modular Jack that exceeds performance specifications to any Category 3 requirement. SMP s KMJ Category 3 jacks offer easy installations with 110 style terminations on back for 26, 24, and 22 AWG solid conductors and delivers unsurpassed performance, keeping with SMP s guarantee for consistent performance. 110 style IDC contacts TERMA Grip conductor & jacket retention for easy wiring Available in 12 color options Fits all SMP Keystone faceplates and surface mount boxes KMJL8A/Bxx KMJL06Uxx KMJ Category 3 Jacks KMJ Jack 568A/B, 8x8 Leadframe, 110 style KMJ Jack USOC, 6x6 Leadframe, 110 style * Replace xx with color code see color code chart on page WS-11

KMJ Jacks and Adapters Workstation WS-13 KMJ Adapters SMP s Keystone adapters complete the product line by offering a full array of data, video, and audio ports for fiber, copper, coaxial and speaker cables. Featuring snap-in accessibility and a wide arrange of multi-media options, the SMP KMJ adapter line gives customers a flexible solution to meet any connectivity demand. Fits all SMP Keystone faceplates and surface mount boxes AKSVHS12 AKBLK12 AKSCMxx AKSTMxx AKDLCMxx AKBNCxx AKFxx AKSVHSxx AKRCAPxx AKRCA110yxx AKBP2xx AKBC2xx AKBLKxx KMJ Adapters KMJ snap-in SC Multi-mode adapter KMJ snap-in ST Multi-mode adapter KMJ snap-in Dual LC Multi-mode adapter KMJ snap-in BNC coupler KMJ snap-in F coupler KMJ snap-in Super VHS adapter KMJ snap-in Gold-plated RCA Bulkhead adapter KMJ snap-in RCA to 110 adapter KMJ snap-in Gold-plated Binding Posts (pair) KMJ snap-in Gold-plated Banana adapters (pair) KMJ snap-in Blank adapters * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White * Replace y with color inset choice: R = Red, Y = Yellow, B = Black, or W = White AKRCA110B12 AKF12 AKBP212 AKRCA110Y12 AKSCM01 AKDLCM00 AKRCAP12 AKSTM12

KMJ Faceplates workstation WS-14 KMJ Faceplates SMP s Keystone line of faceplates offers customers a versatile and flexible approach to any workstation demand. Available to meet a variety of configurations, SMP s KMJ faceplates offer convenience in a visually appealing solution for any desktop purpose. Commercial Faceplates Keystone commercial grade faceplates accept any KMJ style jack or adapter ID windows include write-on labels and plastic protective covers Slotted mounting holes simplify installation Available in most popular colors FPSK01xx FPSK02xx FPSK03xx FPSK04xx FPSK06xx DPSK06xx DPSK12xx KMJ Commercial Faceplates Single gang commercial faceplate, KMJ, 1 port Single gang commercial faceplate, KMJ, 2 port Single gang commercial faceplate, KMJ, 3 port Single gang commercial faceplate, KMJ, 4 port Single gang commercial faceplate, KMJ, 6 port Double gang commercial faceplate, KMJ, 6 port Double gang commercial faceplate, KMJ, 12 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White Angled faceplate reduces strain on existing station cables FPSK04Axx DPSK08Axx KMJ Commercial Angled Faceplates Single gang commercial faceplate, angled KMJ, 4 port Double gang commercial faceplate, angled KMJ, 8 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White

KMJ Faceplates Workstation WS-15 Residential Faceplates Smooth surface faceplates accept any KMJ jack or adapter Available in oversized for coverage of imperfect drywall cuts Three color options FPKS01xx FPKS02xx FPKS03xx FPKS04xx FPKS06xx FPK01xx FPK02xx FPK03xx FPK04xx FPK06xx KMJ Residential Faceplates Single gang smooth faceplate, KMJ, 1 port Single gang smooth faceplate, KMJ, 2 port Single gang smooth faceplate, KMJ, 3 port Single gang smooth faceplate, KMJ, 4 port Single gang smooth faceplate, KMJ, 6 port Single gang smooth faceplate, Oversized, KMJ, 1 port Single gang smooth faceplate, Oversized, KMJ, 2 port Single gang smooth faceplate, Oversized, KMJ, 3 port Single gang smooth faceplate, Oversized, KMJ, 4 port Single gang smooth faceplate, Oversized, KMJ, 6 port DPK06xx DPK12xx Double gang smooth faceplate, KMJ, 6 port Double gang smooth faceplate, KMJ, 12 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White Stainless Steel Faceplates Stainless Steel Construction Accommodates any KMJ jack or adapter Corrosion resistant Catalog Number FPSK01SS FPSK02SS FPSK03SS FPSK04SS FPSK06SS DPSK04SS DPSK06SS DPSK12SS KMJ Stainless Steel Faceplates Single gang stainless steel faceplate, KMJ, 1 port Single gang stainless steel faceplate, KMJ, 2 port Single gang stainless steel faceplate, KMJ, 3 port Single gang stainless steel faceplate, KMJ, 4 port Single gang stainless steel faceplate, KMJ, 6 port Double gang stainless steel faceplate, KMJ, 4 port Double gang stainless steel faceplate, KMJ, 6 port Double gang stainless steel faceplate, KMJ, 12 port

KMJ Faceplates workstation WS-16 Divax Faceplates Designed to blend in with any home or office décor Completely compatible with DIVAX single-gang rectangular electrical plates Mounts in any standard electrical box Can be used with all DIVAX type switches Smooth, clean surface Ultimate flexibility FDKRxx FDK2Rxx FDK3Rxx FDK4Rxx FDBKxx FDKxx FD2Kxx FD3Kxx FD4Kxx KMJ Divax Faceplates Divax faceplate, KMJ, single gang ring Divax faceplate, KMJ, double gang ring Divax faceplate, KMJ, triple gang ring Divax faceplate, KMJ, quad gang ring Divax plate, KMJ, blank insert Divax plate, KMJ, 1 port insert Divax plate, KMJ, 2 port insert Divax plate, KMJ, 3 port insert Divax plate, KMJ, 4 port insert * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, 07=White or 12 = Bright White Receptacle Housing Inserts Fits inside any standard electrical faceplate Accommodates two or four KMJ ports A106Kxx A106K4xx KMJ Receptacle Inserts KMJ Receptacle Insert, 2 port KMJ Receptacle Insert, 4 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White Industrial Faceplate Kit Industrial faceplate kit includes plate and industrial jack housing Seal also included for complete water resistance Accepts any KMJ jack KMJ Jack not included FPWR01xx FPWR02xx KMJ Industrial Faceplate Kit KMJ Industrial faceplate kit with housing, vertical ID window, 1 port KMJ Industrial faceplate kit with housing, vertical ID window, 2 ports * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, 12 = Bright White, or SS = Stainless Steel

Wall Plates & Connectors Workstation WS-17 Wall Plates & Connectors For standard voice grade applications, SMP has developed a durable and practical solution that meets any residential or commercial protocol. Featuring SMP s superior performance jacks, the SMP wall plate is guaranteed to be ideal for any single jack application. Available in Stainless Steel or fire retardant Plastic Easily mounts on any wall Mounting screws provided SMP Standard Commercial/Residential Wall plate WP07 WPSS WP-5E-SS WP-A6-SS Plastic wall plate, 6 position, USOC jack, 1 port, White Stainless Steel wall plate, 6 position, USOC jack, 1 port Stainless Steel wall plate, Category 5e jack, 1 port Stainless Steel wall plate, Category 6 jack, 1 port For applications requiring both voice grade and coaxial access, SMP created a line of smooth standard-size flush mount plates with jacks and/or f-connectors in a single-gang format. All of these wall plates install easily into standard electrical boxes and offer 110 style terminations for easy installations. One-piece construction Easily mounts to any standard electrical box 110 style punch-down termination Mounting hardware included SMP Wall plates with Connectors WP1V12 Plastic wall plate with (1) 6 position, 4 conductor modular jack, Bright White WP2V12 Plastic wall plate with (2) 6 position, 4 conductor modular jacks, Bright White WP1F12 WP2F12 Plastic wall plate with (1) twist-on F-connector, Bright White Plastic wall plate with (2) twist-on F-connectors, Bright White WP1V1F12 Plastic wall plate with (1) 6 position, 4 conductor modular jack and (1) twist-on F-connector, Bright White

Surface Mount Boxes workstation WS-18 Surface Mount Boxes Whether installing single or double gang faceplates, SMP s Surface Mount boxes provide the depth for proper cable orientation into jacks or adapters with easy knock-outs for quick terminations. Ideal for raceway applications, SMP s Surface Mount boxes offer a flexible approach for workstation applications. Available in Single and Double gang Mounting screws, double-sided tape, and cable ties included Perfect for raceway or cable tray applications Will accommodate any SMP UMJ or KMJ faceplate SMSGxx SMDGxx Axcess Surface Mount Boxes Surface Mount Box, single gang Surface Mount Box, double gang * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White, Surface Mount Enclosures SMP s Surface Mount Enclosures are a low-profile, workstation solution that offers flexibility for multiple network configurations. In addition, the Axcess Surface Mount Enclosures are a cost effective approach for multiple desktop applications including cubicle settings and numerous workstation complexes. Available for UMJ or KMJ style jacks and adapters Knockouts on three sides as well as in the base for easy cable entry Port designation included along with blank port cover(s) Designation windows Mounting screws, double-sided tape and cable ties included Axcess UMJ Surface Mount Enclosures SME2xx SME4xx SME8xx SME10xx Surface Mount Enclosure, UMJ, 2 port Surface Mount Enclosure, UMJ, 4 port Surface Mount Enclosure, UMJ, Slim-line, 8 port Surface Mount Enclosure, UMJ, Slim-line,10 port KMJ Surface Mount Enclosures SMEK1xx Surface Mount Enclosure, KMJ, 1 port SMEK2xx Surface Mount Enclosure, KMJ, 2 port SMEK6xx Surface Mount Enclosure, KMJ, 6 port * Replace xx with color choice: 00 = Electrical Ivory, 01 = Office White (SME UMJ style only), 07 = White, or 12 = Bright White

Multi-media boxes Workstation WS-19 Multi-media boxes For conditions that require a variety of media applications, consider SMP s full product line of Multi-media boxes. The Multi-media box by SMP is a one-stop solution for all your workstation applications. It offers complete flexibility in design and can be kitted for multiple hardware options. Optional plates available Complete kits are ready for installation Ideal for small zone distribution applications Fiber storage meets TIA/EIA specifications Available only for UMJ style jacks and adapters MMAPxx MMAPxxA1 MMAPxxA2 MMAPxxA4 MMAPxxA6 MMAPxxDSC1 MMAPxxDSC2 MMAPxxDSC3 MMA77xxP2W4 MMA77xxP2W6 MMA77xxP2W SMP Multi-media Boxes Multi-media box, UMJ, Blank Multi-media box, UMJ, Optional plate, 1 port Multi-media box, UMJ, Optional plate, 2 port Multi-media box, UMJ, Optional plate, 4 port Multi-media box, UMJ, Optional plate, 6 port Multi-media box, UMJ, Optional plate, (1) SM/MM Dual SC port loaded Multi-media box, UMJ, Optional plate, (2) SM/MM Dual SC ports loaded Multi-media box, UMJ, Optional plate, (3) SM/MM Dual SC ports loaded Multi-media box, UMJ, Kitted, 4 port & 3 blank sides Multi-media box, UMJ, Kitted, 6 port & 3 blank sides Multi-media box, UMJ, Kitted, 3 blank sides * Replace xx with color choice: 00 = Electrical Ivory or 01 = Office White

Workstation Wiring Diagrams workstation WS-20 Workstation Wiring Diagrams

C O P P E R U T P C A B L E

Copper UTP Cable Contents: CU-2 Cat5e UTP Cable CU-3 Cat6 UTP Cable High quality Prysmian UTP cable is fully tested and performance qualified with SMP workstation and copper closet connectivity products. The information contained on pages CU-2 and CU-3 is subject to normal manufacturing tolerances. Specifications are subject to change without notice. Important Notice: Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability: This product will be free from defects in material and manufacture at the time of purchase. PRYSMIAN MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at Prysmian s option, to replace or repair the Prysmian product or refund the purchase price of the Prysmian product. Except where prohibited by law, Prysmian will not be liable for any indirect, special, incidental or consequential loss or damage arising from this Prysmian product.

category 5e UTP Cable copper utp cable cu-2 4pair/0.51mm Unshielded Twisted Pair (UTP) Enhanced Category 5 Cable : Plain annealed copper conductors, solid polyethylene insulated, twisted pair, flame retardant PVC overall sheathed. 100Ω balanced cable suitable for Local Area Network (LAN) for horizontal distribution and backbone network cabling (100 MHz). Suitable for 16 Mbps Token Ring/155 Mbps ATM PMD/100 Base VG, T4, X, 1000 Base T (Gigabit Ethernet), etc. Cable is UL listed. Construction Details Conductor: Plain annealed copper 24 AWG Insulation: Polyethylene Core Identification Pair 1: White-Blue stripes/blue Pair 2: White-Orange stripes/orange Pair 3: White-Green stripes /Green Pair 4: White-Brown stripes /Brown Outer sheath: PVC 75 C Sheath colour: Blue Standard Grey Alternative Cross Sectional Drawing PVC Sheath Solid Polyethylene Insulation Plain annealed copper conductor (24 AWG) Dimensions and Mass: Overall cable diameter (nominal): Mass (nominal): 5.2 mm 30.5 kg/km Fire Resistance Characteristics: Cable meets IEC332, part 1 Specification: Test on a single vertical insulated wire or cable Specifications: EIA/TIA 568, ISO/IEC 11801, AS/NZS 3080 and AS/ACIF S008 Mechanical Characteristics: Minimum bending radius [mm]: 40 Maximum pulling tension [N]: 150 Operating temperature range [ºC]: -20 to +60 Electrical Characteristics: DC resistance [Ω/100m]: 9.38 Max. Resistance unbalance [%]: 3.0 Max. Characteristic impedance [Ω]: 100 ± 15 @ 1-100 MHz Mutual capacitance [nf/100m]: 5.5 Max. Capacitance unbalance [pf/100m]: 340 Max. (pair to earth) Note: All electrical characteristics are given at 20ºC Frequency (MHz.) attenuation MAX (db/100m) Pr Pr NEXT MIN (db/100m) Power Sum NEXT MIN (db/100m) Pr Pr ACR MIN (db) POWER SUM ACR MIN (db) Pr Pr ELFEXT MIN (db/100m) POWER SUM ELFEXT MIN (db/100m) RETURN LOSS MIN (db/100m) 1.0 2.1 65.3 62.3 63.2 60.2 63.8 60.8 4.0 4.0 56.3 53.3 52.3 49.3 51.8 48.8 23.0 10.0 6.3 50.3 47.3 44.0 41.0 43.8 40.8 25.0 16.0 8.0 47.2 44.2 39.2 36.2 39.7 36.7 25.0 20.0 9.0 45.8 42.8 36.8 33.8 37.8 34.8 25.0 31.25 11.4 42.9 39.9 31.5 28.5 33.9 30.9 23.6 62.5 16.5 38.4 35.4 21.8 18.8 27.9 24.9 21.5 100.0 21.3 35.3 32.3 14.0 11.0 23.8 20.8 20.1 Part Number: AFC-5EUTP305M-BU-PR 4 PAIR CAT5e UTP CABLE BLUE 305M CARTON Bulk

category 6 UTP Cable copper utp cable cu-3 4pair/0.57mm Unshielded Twisted Pair (UTP) Category 6 Cable : Plain annealed copper conductors, polyethylene insulated, twisted pair, flame retardant PVC overall sheathed. 100Ω balanced cable suitable for Local Area Network (LAN) for high-speed horizontal distribution network cabling (250 MHz). Suitable for 100 Mbps TPDDI, 622 Mbps ATM, 1000 Base T, IEEE 802.3 & IEEE 802.5, Gigabit Ethernet, broadband digital video, etc. Cable is UL listed. Note: Although performance is guaranteed to 250 MHz this cable is tested up to 1200 MHz, results are available on request Construction Details Conductor: Plain annealed copper 23 AWG Insulation: Solid Polyethylene Core Identification Pair 1: White-Blue stripes/blue Pair 2: White-Orange stripes/orange Pair 3: White-Green stripes /Green Pair 4: White-Brown stripes /Brown Outer sheath: PVC 75 C Sheath colour: Grey Standard Blue Alternative Cross Sectional Drawing PVC Sheath Solid Polyethylene Insulation Plain annealed copper conductor (23 AWG) Polyethylene Filler Dimensions and Mass: Overall cable diameter (nominal): Mass (nominal): Specifications: 6.2 mm 40 kg/km ISO/IEC 11801, Class E; AS/NZS 3080; AS/ACIF S008; TIA/EIA 568B; AS 1660.5.6 (Combustion propagation) Physical & Mechanical Characteristics: Minimum bending radius [mm]: 50 Maximum pulling tension [N]: 190 Operating temperature range [ºC]: -20 to +60 Electrical & Transmission Characteristics: DC resistance [Ω/100m]: 9.38 Max. Resistance unbalance [%]: 3 Max. Input impedance [Ω]: 100 @ 1-250 MHz Mutual capacitance [nf/100m]: 5.5 Max. Capacitance unbalance [pf/100m]: 330 Max. (pair to earth) Delay skew [ns/100m]: 45 @ 1-250 MHz Propagation delay [ns/100m]: 536 Max. @ 250 MHz LCL [db]: 16 Min. @ 250 MHz Voltage capability [V]: 110 Power capacity [W]: 20 per pair Note: All electrical characteristics are given at 20ºC Frequency (MHz.) attenuation MAX (db/100m) Pr Pr NEXT MIN (db/100m) Power Sum NEXT MIN (db/100m) Pr Pr ACR MIN (db) POWER SUM ACR MIN (db) Pr Pr ELFEXT MIN (db/100m) POWER SUM ELFEXT MIN (db/100m) RETURN LOSS MIN (db/100m) 1.0 2.1 74.3 72.3 72.2 70.2 67.8 64.8 4.0 3.8 65.3 63.3 61.4 59.4 55.8 52.8 23.0 10.0 6.0 59.3 57.3 53.3 51.3 47.8 44.8 25.0 16.0 7.6 56.2 54.2 48.6 46.6 43.7 40.7 25.0 20.0 8.5 54.8 52.8 46.3 44.3 41.8 38.7 25.0 31.25 10.7 51.9 49.9 41.1 39.1 37.9 34.9 23.6 62.5 15.5 47.4 45.4 31.9 29.9 31.9 28.9 21.5 100.0 19.9 44.3 42.3 24.4 22.4 27.8 24.8 20.1 125 22.5 42.8 40.8 20.4 18.4 25.9 22.9 19.4 155.52 25.3 41.4 39.4 16.1 14.1 24.0 21.0 18.8 175 27.1 40.7 38.7 13.6 11.6 22.9 19.9 18.4 200 29.1 39.8 37.8 10.6 8.6 21.8 18.8 18.0 250 33.0 38.3 36.3 5.3 3.3 19.8 16.8 17.3 Part Number: AFC-6UTP305M-GY-PR 4 PAIR CAT6 UTP CABLE GREY 305M CARTON BULK

contact details AFC Group Pty Ltd Phone: 1300 AFC Group Web: www.afcgroup.com.au Email: contact@afcgroup.com.au Melbourne 93-97 Merrindale Drive Croydon VIC 3136 (03) 9737 4250 sales@afcgroup.com.au Sydney Unit 40, 5 Inglewood Place Baulkham Hills NSW 2153 (02) 9421 4200 nswsales@afcgroup.com.au Newcastle Ground Floor, 2 Portside Crescent Wickham, Newcastle NSW 2293 (02) 4944 2034 newcastlesales@afcgroup.com.au Perth Unit 1, 32 Robinson Avenue Belmont WA 6104 (08) 6253 2200 wasales@afcgroup.com.au Brisbane Unit 6, 333 Queensport Road North Murarrie QLD 4172 (07) 3292 1400 qldsales@afcgroup.com.au Dubai (AFC Networks FZCo) PO Box 262104 JAFZ Dubai UAE +971(4) 883 1872 mesales@afcnetworks.com