2011 WURTH USA, Inc. Revision 08/2011 03.0000

ELECTRICAL

03 Electrical 03 Electrical 2011 WURTH USA, Inc. Revision 08/2011 Back-Up Alarm 03.0435 Batteries 03.0385 Battery Bolts 03.0335 Battery Cable 03.0320-03.0325 Battery Cable Heat Shrink 03.0317 Battery Connectors, Terminals 03.0295-03.0315 Butt Splices 03.0290 Cable Ties 03.0370-03.0381 Cavity Connectors 03.0210 Circuit Breakers, Flashers & Fuse Taps 03.0260-03.0265 Closed-End Connectors 03.0165 Crimp / Seal Connectors 03.0115-03.0125 Crimp / Solder / Seal Connectors 03.0145-03.0155 Crimp Ring Connectors 03.0170-03.0171 Crimping & Cutting Tool 03.0330 Electrical Assortments 03.0005-03.0015 Electrical Connectors 03.0215-03.0230 Fuse Holders 03.0235-03.0246 Fuse Taps and Adaptors 03.0245 Fuses 03.0246-03.0260 Harnesses 03.0390-03.0430 Heat Shrink Tubing 03.0340-03.0350 High Amp Fuses 03.0257 In-Line Butt Connectors 03.0160 Light Bulbs 03.0440-03.0495 Lugs 03.0280-03.0285 Nylon Insulated Connectors 03.0095-03.0110 OEM Connectors 03.0190-03.0205 Solder 03.0055 Solder / Seal Connectors 03.0130-03.0140 Solder Slugs 03.0316 Step Down Butt Connector 03.0110 03.0000 Tape 03.0060-03.0070 Universal Uninsulated Connectors 03.0175-03.0185 Vinyl Insulated Connectors 03.0080-03.0090 Wire 03.0020-03.0051 Wire and Cable Guide 03.0075 Wiring Grommets 03.0360-03.0365 Wiring/Cable Management 03.0355-03.0357

ELECTRICAL ASSORTMENTS Battery Terminals & Solder Slugs Art. # 1964 1510 68 Pieces Battery Solder Slugs Crimp Battery Terminals Polyolefin Heat Shrink Tubing Battery Ring Terminals & Solder Slugs Art. # 1964 05572 65 Pieces Battery Solder Slugs Copper Lugs Polyolefin Heat Shrink Tubing Rubber Wiring Grommets Art. # 1964 05616 230 Pieces Blanking Grommets 6mm - 38mm Wiring Grommets 18mm ATO Mini Blade Fuses Art. # 1964 17311 100 Pieces Mini Blade 3-30 amp. ATO Standard Blade Fuses Art. # 1964 17310 160 Pieces Standard Blade 3-30 amp. Assorted Fuses Art. # 1964 1730 240 Pieces Selection of most popular fuses including: Blade Ceramic Glass 2011 WURTH USA, Inc. Revision 05/2014 Maxi & Mini Fuses Art. # 1964 17312 60 Pieces Mini Blade 2-30 amp. Maxi Blade 20-60 amp. 03.0005 ATO/ATC Mini, Standard & Maxi Fuses Art. # 1964 00008 240 Pieces Standard 3-40 amp. Mini 2-30 amp. Maxi 20-60 amp.

ELECTRICAL ASSORTMENTS Nylon Insulated Connectors Art. # 1964 1559 600 Pieces Ring Terminals Push-on Fully Insulated Spade Terminals Butt Connectors Bullet Connectors Scotch Lock & T-Tap Weather Pak Connectors Art. # 1964 15593 75 Pieces Pack Connectors 2-Part Terminals Metri & Micro Pak Electric Control Wedgloc Pin Tab Terminals and more Crimp/Seal Connectors Art. # 1964 15591 160 Pieces Ring Terminals Push-on Fully Insulated Spade Terminals Butt Connectors Bullet Connectors Solder/Seal Connectors Art. # 1964 15552 120 Pieces Spade Terminals Ring Terminals Butt Connectors Solder/Seal Connectors Art. # 1964 15553 240 Pieces Ring Terminals Fork Terminals Spade Terminals Butt Connectors Crimp/Solder Seal Connectors Art. # 1964 15592 210 Pieces Ring Terminals Spade Terminals Butt Connectors Fork Terminals 2011 WURTH USA, Inc. Revision 05/2014 Vinyl Insulated Connectors Art. # 1964 05581 445 Pieces Scotch Lock Ring Terminals Piggyback Spade Spade Terminals Butt Connectors Bullet Connectors 03.0010 European Bulbs Art. # 1964 1720 165 Pieces Halogen Bulbs Dome Bulbs Dash Bulbs Brake Light Bulbs Soffit Bulbs Tail / Stop Bulbs

ELECTRICAL ASSORTMENTS Light Bulbs Art. # 1964 1721 176 Pieces Selection of most popular 12 volt bulbs including: Halogen Wedge Dome Amber Black Tie Straps Art. # 1964 15021 200 Pieces 3/32-3/16 width 4-14-1/2 lengths Heat Shrink Tubing Art. # 1964 07710 66 Pieces Shrink Tubing 2mm x 100mm, 3mm x 100mm, 4mm x 100mm, 6mm x 100mm, 9mm x 100mm, 12mm x 100mm, 19mm x 100mm, 25mm x 100mm CROSSOVERS Cable Tie Rack Art. # 050205020 See Tools/Shop Supplies *Cable ties not included. 4 Drawer Cabinet Art. # 1955104 See Tools/Shop Supplies *Assortment trays & base with legs not included. Bulb Rack Art. # 1966720 See Tools/Shop Supplies *Bulbs not included. 2011 WURTH USA, Inc. Revision 05/2014 03.0015

ORSY WIRE REEL SYSTEM Dispenser Includes: Dispenser assembly 5 reel holders - Art. # 0956 10903 8 small stars (holds 4 rolls) Art. # 0956 10901 Mounting hardware Note: Order wire separately. Combination shears sold separately Art. # 0714 0314. Description Art # Small Dispenser 0956109 Large Reel System Stars 095610902 Small Reel System Stars 095610901 Reel Holder 095610903 Coil Core Plastic Insert 095610904 Economical: Allows for easy inventory management Functional: A fully developed and practical solution Run-out safeguard thanks to integrated ratchet Adjustable holder for coils Universal: Can be used for six different rolled products Examples of products that can be used: > Vehicle hose lines > Fuel hose > Zebra abrasive paper > Dry sandpaper > Nylon sanding fleece 2011 WURTH USA, Inc. Revision 05/2014 03.0020

WIRE FOR ORSY 10 SYSTEM WURTH ORSY wire is manufactured of the highest grade material available The ORSY wire insulation is a special extra flexible compound available only from WURTH The ORSY wire is packaged in bulk which makes it very cost effective and installs on the ORSY 10 System in seconds No more unraveling and wasted wire! DIN/ISO 6722 PVC outer casing Nominal voltage: U2=50 V, U4=60 V Temperature range: Class A, -40 F to +185 F Very high strand count per gauge! Silicone-free, free from cadmium and lead Note: Different length sizes per gauge. Gauge Color Art # Gauge Color Art # Black 0770075 Red 07700751 Blue 07700752 (1.5) 14ga. 100 meters (328') length Red/Yellow 077010451 Black/White 077010454 Red/Black 077010455 (.75) 18ga. 100 meters (328') length Yellow 07700753 Green 07700754 White 077007542 Purple 077007543 Brown 07700759 (2.5) 12ga. 50 meters (164') length Black 0770105 Red 0770106 Blue 0770107 Purple 07701070 Yellow 0770108 Red 07700901 Green 0770109 (1.0) 16ga. 100 meters (328') length Blue 07700902 Green 07700904 Brown 07700909 Black 077010 Black 0770100 Red 0770101 (4.0) 10ga. 25 meters (82') length (6.0) 8ga. 50 meters (164') length Brown 07701099 Black 0770110 Red 07701100 Black 07701112 Red 077011121 Blue 0770102 (1.5) 14ga. 100 meters (328') length Purple 07701020 Yellow 0770103 Green 0770104 Brown 07701040 White 07701042 2011 WURTH USA, Inc. Revision 05/2014 03.0025

DOMESTIC WIRE 100 SPOOL Single conductor copper strand Flexible, permanent colored high abrasion resistance Highest quality polyvinyl chloride insulation Resistant to acids, grease, oil and diesel fuels Meets all SAE J1128 type GPT specifications Works safely between -40 F and +176 F For use at 50 volts or less 2011 WURTH USA, Inc. Revision 08/2011 Gauge Color Art # 22 Black 1770992210 Red 1770992230 Blue 1770991800 Black 1770991810 Grey 1770991815 Green 1770991820 Red 1770991830 18 Yellow 1770991840 Brown 1770991850 White 1770991860 Orange 1770991870 Purple 1770991880 Pink 1770991885 Blue 1770991600 Black 1770991610 Grey 1770991615 Green 1770991620 Red 1770991630 16 Yellow 1770991640 Brown 1770991650 White 1770991660 Orange 1770991670 Purple 1770991680 Pink 1770991685 03.0030 Gauge Color Art # Blue 1770991400 Black 1770991410 Grey 1770991415 Green 1770991420 Red 1770991430 14 Yellow 1770991440 Brown 1770991450 White 1770991460 Orange 1770991470 Purple 1770991480 Pink 1770991485 Blue 1770991200 Black 1770991210 Grey 1770991215 12 Green 1770991220 Red 1770991230 Yellow 1770991240 Brown 1770991250 White 1770991260 Blue 1770991000 Black 1770991010 10 Green 1770991020 Red 1770991030 Yellow 1770991040 White 1770991060 8 Black 1770990810 Red 1770990830

TWO CONDUCTOR CABLE Heavy duty Gray jacket Black and white conductors Size Length/Roll Art # 16-2 0770162100 100' 14-2 177013142 BONDED PARALLEL TRAILER WIRE Description Size Art # Bonded Parallel Trailer Wire 16-4 17709090 Especially for RV s and boat trailers Meets all SAE J1128, type GPT specifications Works safely between -20 F and +176 F For use at 50 volts or less Spool size: 100 ft. 16 ga. ROHS compliant All copper strand core FUSIBLE LINK WIRE Acts like a fuse when a short or overload occurs. Should be used only to repair factory installed fusible links with the same exact length and gauge being matched. Guage Color Length Art # 12 Blue 10 ft. 17709501 14 Grey 10 ft. 17709502 16 Black 10 ft. 17709503 TRAILER CABLE 2011 WURTH USA, Inc. Revision 05/2014 14/6 trailer cable - 100 spool Made with a new plastic outer jacket that remains flexible at very low temperatures The inside conductors are made to SAE specifications Conductor stranding 19/27 O.D. Color Code Art #.488" Yellow, Red, Green, Brown, Blue, Black 17701510 03.0035

MULTI-STRAND WIRE WURTH Multi-Strand Wire is ideal for wiring trailers, trucks, RV units, etc The insulation is very flexible and protects against abrasion PVC outer sheathing Silicone, cadmium and lead free Temperature -40 F to 70 F Voltage AC = 50 V, DC = 60 V DIN/ISO 6722 Imported from Germany Gauge # Wires Colors Art # 2 White, Black 0770122 16 5 White, Black, Brown, Yellow, Green 0770117 4 White, Black, Brown, Yellow 0770119 FLAT RIBBON CABLE Parallel wire is SAE general purpose wire bonded together in a ripcord manner Color coded to SAE specifications for identification purposes The conductors are easily separated Size Length/Roll Art # 14-4 100' 177013144 2011 WURTH USA, Inc. Revision 05/2014 03.0040

TRACER WIRE 100 WIRE SPOOL Automotive lead-free polyvinylchloride (PVC) wire SAE J-1128 Great for use on automotive, motorcycle and marine applications for general circuit wiring Color coded for easy identification through a fire wall or in a pigtail Demanded by Harley Davidson shops across the country Lead free polyvinylchloride (PVC) wire SAE J-1128 (-40 F to 221 F) 2011 WURTH USA, Inc. Revision 08/2011 Gauge Color Art # Grey/Green 1770981521 Black/Red 1770991131 Black/White 1770991161 Black/Green 1770991171 Gray/Black 1770991511 Gray/Yellow 1770991541 Gray/White 1770991561 Gray/Orange 1770991571 Green/Yellow 1770992041 Green/Blue 1770992051 Green/Orange 1770992071 Lt. Green/Brown 1770992131 Green/Brown 1770992151 Red/Yellow 1770993041 Red/White 1770993061 Red/Orange 1770993062 Red/Blue 1770993063 Yellow/Black 1770994011 Yellow/Orange 1770994021 Yellow/Violet 1770994023 18 Yellow/Red 1770994031 Yellow/White 1770994061 Brown/White 1770995061 Brown/Black 1770995062 Tan/Yellow 1770995141 White/Black 1770996011 White/Green 1770996021 White/Red 1770996031 White/Blue 1770996041 White/Brown 1770996051 White/Orange 1770996071 White/Purple 1770996081 Orange/Black 1770997011 Orange/White 1770997061 Orange/Purple 1770997081 Purple/Black 1770998011 Purple/Gray 17709980151 Purple/White 1770998061 Pink/White 1770998561 Blue/Yellow 1770999011 Blue/Black 1770999021 Violet/Green 1770999111 03.0050 Gauge Color Art # Black/Red 1770981031 Black/White 1770981061 Black/Green 1770981171 Gray/Black 1770981511 Gray/Yellow 1770981541 Gray/White 1770981561 Gray/Orange 1770981571 Green/Yellow 1770982041 Green/Blue 1770982051 Green/Orange 1770982071 Lt. Green/Brown 1770982131 Green/Brown 1770982151 Red/Yellow 1770983041 Red/White 1770983061 Red/Orange 1770983062 Red/Blue 1770983063 Yellow/Black 1770984011 Yellow/Orange 1770984021 Yellow/Violet 1770984023 Yellow/Red 1770984031 20 Yellow/White 1770984061 Brown/White 1770985061 Brown/Black 1770985062 Tan/Yellow 1770985141 White/Black 1770986011 White/Green 1770986021 White/Red 1770986031 White/Blue 1770986041 White/Brown 1770986051 White/Orange 1770986071 White/Purple 1770986081 Orange/Black 1770987011 Orange/White 1770987061 Orange/Purple 1770987081 Purple/Black 1770988011 Purple/Gray 17709880151 Purple/White 1770988061 Pink/White 1770988561 Blue/Yellow 1770989011 Blue/Black 1770989021 Violet/Green 1770989111 Grey/Green 1770991521

TRACER WIRE 100 WIRE SPOOL (CONTINUED) Automotive Lead-free Polyvinylchloride (PVC) Wire SAE J-1128 Great for use on automotive, motorcycle and marine applications for general circuit wiring Also for Prevost buses and police car fleets (Highway Patrol) Color coded for easy identification through a fire wall or in a pigtail Demanded by Harley Davidson shops across the country Lead free polyvinylchloride (PVC) wire SAE J-1128 (-40 F to 221 F) 2011 WURTH USA, Inc. Revision 05/2014 Gauge Size Color Art # 22 100 ft. Roll Grey/Green 1770971521 Black/Red 1770971131 Black/White 1770971161 Black/Green 1770971171 Gray/Black 1770971511 Gray/Yellow 1770971541 Gray/White 1770971561 Gray/Orange 1770971571 Green/Yellow 1770972041 Green/Blue 1770972051 Green/Orange 1770972071 Lt. Green/Brown 1770972131 Green/Brown 1770972151 Red/Yellow 1770973041 Red/White 1770973061 Red/Orange 1770973062 Red/Blue 1770973063 Yellow/Black 1770974011 Yellow/Orange 1770974021 Yellow/Violet 1770974023 Yellow/Red 1770974031 Yellow/White 1770974061 Brown/White 1770975061 Brown/Black 1770975062 Tan/Yellow 1770975141 White/Black 1770976011 White/Green 1770976021 White/Red 1770976031 White/Blue 1770976041 White/Brown 1770976051 White/Orange 1770976071 White/Purple 1770976081 Orange/Black 1770977011 Orange/White 1770977061 Orange/Purple 1770977081 Purple/Black 1770978011 Purple/Gray 1770978051 Purple/White 1770978061 Pink/White 1770978561 Blue/Yellow 1770979011 Blue/Black 1770979021 Violet/Green 1770979111 03.0051

ROSIN CORE SOLDER 60/40 Exceeds all military, government, and J-STD-006 specifications for electronic and industrial solders.062 dia. General purpose, automotive solder Solder easily dispensed through tube in red cap.5 oz. spool Description Art # Rosin Core Solder 60/40 1987062 ELECTRIC SOLDER NO. 10 60/40 tin/lead according to DIN EN 29453 (DIN 1707) Continuous feed of flux DIN EN 29454-1/1.1.3.B (F-SW 32 DIN 8511) due to 5 solder cores Processing temperature: 240-260 o C Melting temperature: 183-190 o C Flux residues have no corrosive effect Low soldering temperature due to quick flowing solder Specially suitable for printed circuit boards 300 spool 1 lb. Description Art # Electric Solder No. 10 0987105 SILICONE TAPE 2014 Wurth USA, Inc. Revision 12/2014 Dimensions: 25.4 mm (width) x 3.05 m (length) x 0.51 mm (thickness) Resistant to a broad range of media Water and air-tight in seconds Very versatile Extremely simple, fast application Optimally suited for breakdown and emergency service UV-resistant Functions even on damp or oily surfaces and under water Can be removed without residues Permanently elastic Temperature range: -65 C to +260 C (-85 F to 500 F) Insulates to 400 volts / mil Class H insulation Description Size Art # Silicone Tape - Black 0985077200 Silicone Tape - Red 10 ft. length roll/1 in. wide 0985077201 Silicone Tape - Clear 0985077202 03.0055

COLD SHRINK TAPE Water resistant Your advantages: The shrink tape provides various materials with a water and steam proof seal Good insulation properties Your advantages: Thanks to its disruptive strength, the tape is highly suitable for insulating cables and electical lines Highly compatible with any insulation and sheathing materials Your advantages: Good compatibility with PE, PVC, butyl, neoprene etc. allows to be used in many different areas in the automotive and electrical fields Highly elastic Your advantages: The tape can be stretched considerably and nestles very close to the material to be processed Applications Sealing of pipes and hoses Emergency sealing of radiator and gas hoses Insulation of electrical lines and cables For use in places where heat shrink tubes can no longer be used Bundling lines Base material Elongation at tear 600% Application temperature Temperature resistance Disruptive strength Shelf life (at approx. 68 F and 50% humidity) UV resistance Moisture resistance Polyisobutylene (black) 41 F to +95 F -40 F to +194 F 40kV/mm 24 months (store dry, lying and dust-free) conditional given Notes on application The surfaces to be sealed must be dry and free of dust and grease Remove PVC cover foil and stretch the tape considerably To achieve problem-free adhesion and a water-proof seal, wrap the tape tightly around the material to be processed and then overlap The shrink tape is only conditionally UV-resistant and should therefore be protected from direct sunlight Description Art # Cold Shrink Tape - 19850771 3/4" x 33 ft. BRUSHABLE ELECTRICAL TAPE 4fl oz. brush can Protects vehicle wiring from all weather conditions as well as corrosion from salt and calcium Flexible waterproof coating Easy to use brush applicator Coats, seals and insulates Won t crack, fray or unravel like tape Great for hard to reach areas 2011 WURTH USA, Inc. Revision 08/2011 Description Art # Brushable Electical Tape 0893198010 03.0060

ELECTRICAL TAPE Plasticised PVC tape with good mechanical and electrical properties UL/CSA listed for use in electrical insulation application Having a modified rubber-resin adhesive coating provides good ageing resistance and high adhesion strength Suitable for most electrical insulation application in the building, construction, automotive, cycle and marine industries Also useful in sealing, binding, protection and decorative application Size roll: 3/4 x 60 Thickness: 7 mil. High quality electrical tape for all your electrical needs Suitable for use at no more than 600v and not more than 176 F 10 rolls per sleeve Description Art # Electrical Tape 1985615 IMPORTED ELECTRICAL TAPE VDE-tested according to DIN EN 60454-3-1 Type 5 Your advantages: Safety thanks to tested properties Up to 9kV disruptive strength Hardly flammable Safe, easy use Your advantages: Tear-proof and resistant to ageing High flexibility and adhesive strength Following assembly, consistently positive properties, even at changing temperatures Largely resistant to diluted acid and caustic solution Application For insulating, marking electrical cables and securing cable harnesses etc. Note: Protect tape from exposure to direct sunlight. Description Art # Imported Electical 09856 Tape Chemical basis Thermal stability Disruptive strength Minimum shelf life Acrylate, soft PVC foil 32 F to +194 F 9 kv 24 months 3M LINERLESS ELECTRICAL SPLICING TAPE 2011 WURTH USA, Inc. Revision 08/2011 Size roll: 3/4 x 15 x 0.030 thickness Moisture sealing Insulating Flame retardant Description Art # 3M Linerless Electrical Splicing Tape 1985617 03.0065

MOISTURE SEAL TAPE Size roll: 2.5 x 10 x 0.045 thickness Moisture proof connectors Tough vinyl backing prevents abrasion Protects terminal blocks Adds strain relief to splices Vulcanizes when both tape surfaces meet giving all season, all weather protection Description Art # Moisture Seal Tape 1985616 Place Join Tape Surface Sealed Permanently BLACK CLOTH FRICTION TAPE (Cotton cloth impregnated with a rubber based adhesive) Applications: Offers good mechanical protection against abrasion and penetration of low voltage cable, splices and wire. Used for insulation and protection of industrial harnesses and electrical wires from physical damage caused by friction. Features/Benefits: Black cotton cloth with non-corrosive rubber resin adhesive. It s cloth backing makes this tape easily torn by hand and extremely conformable. Highly resistant to humidity and galvanic corrosion. For contractors who demand a consistent, trouble-free product. Performance Specifications: Maximum Temperature of 176 F Dielectric Strength of 1,000 volts 3/4 x 60 Roll Description Art # Black Cloth Friction Tape 1985620 2011 WURTH USA, Inc. Revision 10/2012 03.0070

WIRE AND CABLE GUIDE Typical Amperage Draw Determining Wire and Cable Gauge Size by Circuit Amps and Length Total Wire Gauge for Length in Feet (Total circuit length) Circuit Amps 12v 3' 5' 7' 10' 15' 20' 25' 30' 40' 50' 75' 100' 1 18 18 18 18 18 18 18 18 18 18 18 18 3 18 18 18 18 18 18 18 18 18 18 14 14 5 18 18 18 18 18 18 18 18 14 14 12 12 7 18 18 18 18 18 18 16 16 14 14 10 10 10 18 18 18 18 16 16 16 14 12 12 10 10 15 18 18 18 18 14 14 12 12 10 10 8 8 20 16 16 16 16 14 12 10 10 10 10 8 6 24 14 14 14 14 12 12 10 10 8 8 6 6 30 12 12 12 12 10 10 10 10 6 6 4 4 40 10 10 10 10 10 10 8 8 6 6 4 2 50 8 8 8 8 8 8 8 8 6 6 2 2 100 4 4 4 4 4 4 4 4 2 2 1 1/0 150 2 2 2 2 2 2 2 2 1 1 2/0 2/0 200 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 4/0 4/0 Installation Tips & Safety Accompanying charts are guides only, always follow wire and cable sizes recommended by original equipment manufacturer Increasing wire and cable size typically increases conductivity and safety Never use lighter wire and cable as it could cause component failure, heat build up and fire 2011 WURTH USA, Inc. Revision 05/2014 03.0075 *Assumes eight series connections with frame ground. Return path length includes cable from battery(ies) to starter and return to battery(ies), batter-to-battery series connections, and length of frame member used in return. No external contactors are included in calculations. **Minimum gauge size recommended for highoutput system. Dual path system preferred.

VINYL INSULATED CONNECTORS Polycarbonate (Makrolon) Insulated Crimp Cable Connectors The inner part of the cable lug is made from high-quality electrolytic copper and electroplated with tin then soldered in the sleeve. The dimensions comply with DIN Standards. Halogen-free, self-extinguishing polycarbonate (makrolon) is used as insulating material which has a superior heat resistant rating of up to 248 F. In contrast, PVC is heat rated to 167 F and both polyvinyl chloride and nylon are heat rated to 221 F. Excellent resistance properties against alcohols, mineral acids, gasoline, greases and oils. Excellent non-deformability properties - does not crack or create white stress points at crimp folds. Brazed seams fold & compress on the wire creating a secure reliable crimp that holds. Less quality butted seams can fly apart and crack reducing the effective hold of the crimp. Reinforced neck opening creates a stronger transition section at the neck, strengthening a notorious weak point. Covered, fluted entry sleeve protects exposed wire with a metal flute and an extension of the heavy vinyl insulation from debris and contaminants that cause corrosion. Art. # 05589192 M4 Art. # 05589542 M5 Art. # 05589224 M5 Thick, heavy grade vinyl insulation will not crack or cut when crimped. VINYL INSULATED BUTT CONNECTORS Cross-Section in mm 2 Color Length in mm approx. Art # 0.5-1.0 Red 25 05589251 1.5-2.5 Blue 25 05589262 4.0-6.0 Yellow 27 05589274 2011 WURTH USA, Inc. Revision 05/2014 03.0080

VINYL INSULATED RING LUGS Gauge Cross-Section in mm 2 Color Flange Hole Art # M3 05589001 M4 05589011 22-18 0.5-1.0 Red M5 05589021 M6 05589031 M8 05589041 M3.5 05589072 M4 05589082 16-14 1.5-2.5 Blue M5 05589092 M6 05589102 M8 05589112 M10 05589122 M4 05589144 M5 05589154 12-10 4.0-6.0 Yellow M6 05589164 M8 05589174 M10 05589184 VINYL INSULATED PUSH-ON RECEPTACLE Gauge Cross-Section in mm 2 Color Size in mm Art # 2.8 x 0.8 0558960 22-18 0.5-1.0 Red 4.8 x 0.5 05589761 6.3 x 0.8 05589051 4.8 x 0.5 05589762 16-14 1.5-2.5 Blue 6.3 x 0.8 05589052 8.2 x 8.0 05589402 12-10 4.0-6.0 Yelow 6.3 x 0.8 05589054 9.5 05589414 VINYL INSULATED FULLY INSULATED PUSH-ON RECEPTACLE Gauge Cross-Section in mm 2 Color Size in mm Art # 22-18 0.5-1.0 Red 055890511 6.3 x 0.8 16-14 1.5-2.5 Blue 055890522 2011 WURTH USA, Inc. Revision 05/2014 03.0085

PUSH-ON RECEPTACLES INCLUDING PUSH-ON TABS Cross-Section in mm 2 Color Size in mm Art # 0.5-1.0 Red 05589421 6.3 x 0.8 1.5-2.5 Blue 05589432 PUSH-ON TABS Cross-Section in mm 2 Color Size in mm Art # 2.8-0.8 05589751 0.5-1.0 Red 4.8-0.8 05589391 6.3-0.8 05589441 1.5-2.5 Blue 4.8-0.8 05589392 6.3-0.8 05589452 FULLY INSULATED CIRCULAR PLUG SLEEVES Cross-Section in mm 2 Color Size in mm Art # 0.5-1.0 Red 4 05589471 1.5-2.5 Blue 5 05589492 4.0-6.0 Yellow 5 0558962 CIRCULAR PLUGS Cross-Section in mm 2 Color Size in mm Art # 0.5-1.0 Red 4 05589461 1.5-2.5 Blue 5 05589482 4.0-6.0 Yellow 5 0558961 2011 WURTH USA, Inc. Revision 05/2014 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. 03.0090

NYLON INSULATED CONNECTORS Designed for heavy duty applications and superior performance for extreme vibration and moisture Tin plated annealed copper for improved corrosion resistance, max conductivity and crimp strength Serrated barrel for greater wire retention/pullout strength Operating temperature range from -67 F to 221 F UL/CSA listed where applicablev male female 1 2 3 4 5 6 7 8 Double Crimp male female female 9 10 11 12 13 14 15 16 2011 WURTH USA, Inc. Revision 05/2014 1 Gauge Size Color Size Art # 1559611514 2 1559611414 1/4" 3 1559511514 4 1559511414 22-18 Red 5 #6 155962106 6 #8 15596214 7 #10 1559621010 8 1/4" 1559621014 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. 9 03.0095 Gauge Size Color Size Art # #6 15596613 10 #8 15596614 11 #10 15596615 12 --- 1559641 22-18 Red 13 --- 15596419 14 --- 15596914 15 --- 15596915 16 1/4" 15596814

NYLON INSULATED CONNECTORS (CONTINUED) female male tabs 1 2 3 4 5 6 7 8 9 10 11 12 Double Crimp male female male female male female female 13 14 15 16 17 18 19 20 21 22 23 24 2011 WURTH USA, Inc. Revision 05/2014 1 Gauge Size Color Size Art # 1559612514 2 1559612414 1/4" 3 1559512514 4 1559512414 5 #8 155962208 6 #10 15596225 16-14 Blue 7 1/4" 15596226 8 5/16" 15596228 9 3/8" 1559622038 10 15596624 #8 11 155963204 12 #10 15596625 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. 03.0100 13 Gauge Size Color Size Art # --- 1559642 14 --- 15596429 15 --- 15596924 16 --- 1559692 17 15596524 1/4" 18 15596525 16-14 Blue 19 1559652436 3/16" 20 1559652536 21 0.110" 155965242* 22 #10 1559632 23 1/4" 15596824 24 --- 155967414 *Not UL Listed or CSA Certified

NYLON INSULATED CONNECTORS (CONTINUED) female male 1 2 3 4 5 6 7 8 9 10 Double Crimp 11 12 13 14 Gauge Size Color Size Art # 1 1559613514 2 1559613414 3 1/4" 1559003 4 155951359 5 155951349 12-10 Yellow 6 #8 155962308 7 #10 1559623010 8 1/4" 15591375 9 5/16" 1559623056 10 3/8" 1559623038 Gauge Size Color Size Art # 11 #10 15596635 12 --- 1559643 12-10 Yellow 13 --- 15596439 14 --- 155967412 2011 Wurth USA, Inc. Revision 11/2014 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. 03.0105

NYLON INSULATED CONNECTORS (CONTINUED) Gauge Size Color Size Art # 1 6 ga Blue --- 155964206 2 --- 155964108 8 ga Red 3 3/8" ring 1559621056 1 2 3 Gauge Size Description Art # 16-14 4-way connector 155964294 STEP DOWN BUTT CONNECTOR Gauge Color Art # 10-12 to 16-14 Yellow 15589400 14-16 to 18-22 Blue 15591418 2011 WURTH USA, Inc. Revision 05/2014 03.0110

CRIMP/SEAL CONNECTORS Features and Benefits... Translucent, adhesive-lined polyolefin tubing allows visual inspection, prevents corrosion and provides a waterproof seal. Conforms to automotive manufacturers specifications for wiring repairs necessary for maintaining electrical warranties. Seamless butt connectors & brazed seam rings and spades prevent opening of connector barrel. Color-coded tubing with wire gauge imprint provides easy identification of the correct part for the job. UL LISTED PARTS FILE #E141071 Crimped Mechanically Sound Seamless Barrel - Butt Connectors Brazed Seam Rings and Spades Sealed Durable Insulation Watertight Connection Color-coded with Wire Gauge Imprint Differences... Brazed Seam Connectors Formed much like a butted seam, except the seam is brazed together with a silver alloy. May be used with solid wire and can be crimped on any side of the barrel without opening the seam. Seamless Connectors Generally only available for a butt connector or splice. The barrel is created from one seamless piece of metal. This eliminates the problem of the barrel opening when crimped. May be used with solid wire. Butted Seam Connectors Formed when metal is stamped, rolled and butted to create the connector barrel. Should only be used with stranded wire and must be crimped in the proper place to avoid opening the seam. WURTH Crimp/Seal Connectors Brazed & Seamless Connector Competitors Connectors Butted Connector Easy Installation... 1 Strip wires 3/8 and insert wire into the connector barrel. 2 Seat wires. Advantages... Better wire contact with seamless barrels or brazed seams Less voltage drop with a solid and secure crimp Increased current flow with mechanically sound connections Prevents wiring failures related to butted connectors Decreases repair cost - reworks Reduces equipment downtime Superior tensile strength 3 4 5 2011 WURTH USA, Inc. Revision 08/2011 Crimp the wires using an insulated crimping tool. Apply even heat over entire connector. Finished product. 03.0115

OPTICLEAR CRIMP/SEAL BUTT CONNECTORS Features Window in center of connector assures that wire is seated properly and the wire is being crimped to the connector. Color-coded stripes identify wire gauge size to be used with connector. Color-coded stripes also guide the installer to the proper crimp position on the center of the crimp barrel. Seamless crimp barrel butt connectors ensure superior crimp performance. Wire-stop feature in the butt connectors prevents over-insertion of the wire. ROHS compliant. Description Color Length Qty. Art # OptiClear Crimp Seal Butt Connectors - 22-18 Gauge Red 1.5 25 05556101 OptiClear Crimp Seal Butt Connectors - 16-14 Gauge Blue 1.5 25 05556102 OptiClear Crimp Seal Butt Connectors - 12-10 Gauge Yellow 1.625 25 05556104 CRIMP/SEAL CONNECTORS female male male female 1 2 3 4 5 6 7 8 9 2011 WURTH USA, Inc. Revision 05/2014 Gauge Size Color Size Art # 1 1559651518 1/4" 2 15595114 3 #6 1559721618 4 #8 1559721818 5 22-18 Red #10 1559721010 6 1/4" 155972114 7 --- 15597914 8 --- 15597915 9 --- 1559741 03.0120 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. UL LISTED PARTS FILE #E141071

CRIMP/SEAL CONNECTORS (CONTINUED) female male female male 1 2 3 4 5 6 7 8 9 10 11 Gauge Size Color Size Art # 1 1559512516 1/4" 2 15595124 3 #6 155972206 16-14 Blue 4 #8 155972208 5 #10 155972210 6 1/4" 155972214 Gauge Size Color Size Art # 7 5/16" 155972256 8 3/8" 155972238 9 16-14 Blue --- 15597924 10 --- 15597925 11 --- 1559742 female male 1 2 3 4 5 6 7 2011 WURTH USA, Inc. Revision 05/2014 Gauge Size Color Size Art # 1 1559652010 1/4" 2 15595134 3 #10 155972310 4 12-10 Yellow 1/4" 155972314 5 3/8" 155972338 6 1/2" 155972312 7 --- 1559743 03.0125 Gauge Size Color Art # 8 Red 15597411 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. UL LISTED PARTS FILE #E141071

SOLDER/SEAL CONNECTORS Features and Benefits... Translucent, adhesive-lined polyolefin tubing allows visual inspection, prevents corrosion and pro vides a waterproof seal. Easy installation with pre-measured solder takes the guesswork out of the soldering process. A soldered electrical connection provides superior current flow and tensile strength. Color-coded tubing with wire gauge imprint provides easy identification of the correct part for the job. UL LISTED PARTS FILE #E141071 Soldered Exact, Pre-Measured Solder Superior Strength Better Conductivity Sealed Durable Installation Watertight Connection Transparent Tubing for Visual Inspection Problems/Solutions... Problem Corrosion on wire causes voltage drop. Solution Adhesive-lined polyolefin tubing prevents corrosion. Wire pulled loose due to strain and/or vibration. Translucent tubing allows visual inspection of installation. Cannot see whether terminal is properly installed. Adhesive-lined heat shrink tubing and solder combine to increase tensile strength. 1 2 Strip wires 3/8, overlap and slide into connector. Align wires evenly with solder. Advantages... Improved wire contact with pre-measured solder Eliminates voltage drops with improved current flow Eliminates connector failure from vibration and strain Allows visual inspection of soldered section Prevents wiring failure due to corrosion Increased tensile strength 3 4 2011 WURTH USA, Inc. Revision 08/2011 Apply even heat over entire connector. Finished product. 03.0130

SOLDER/SEAL CONNECTORS Gauge Size Color Size Art # 24-22 Clear --- 1559844 female male female 1 2 3 4 5 6 7 8 9 Gauge Size Color Size Art # 1 05559051 2 1/4" 05559441 3 155985101 4 #6 155982106 5 22-18 Red #8 155982108 6 #10 1559821010 7 1559821014 1/4" 8 1559831 9 --- 1559841 2011 WURTH USA, Inc. Revision 05/2014 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. 03.0135 UL LISTED PARTS FILE #E141071

SOLDER/SEAL CONNECTORS (CONTINUED) female male female 1 2 3 4 5 6 7 8 9 10 Gauge Size Color Size Art # 1 05559052 2 1/4" 05559452 3 16-14 Blue 155985102 4 #8 155982208 5 #10 1559822010 Gauge Size Color Size Art # 6 1/4" 1559822014 7 5/16" 1559822056 8 16-14 Blue 3/8" 1559822038 9 1/4" 1559832 10 --- 1559842 female male 1 2 3 4 5 6 7 8 9 1 2 2011 WURTH USA, Inc. Revision 05/2014 Gauge Size Color Size Art # 1 05559054 1/4" 2 05559462 3 #10 1559823010 4 1/4" 1559823014 5 12-10 Yellow 5/16" 1559823056 6 3/8" 1559823038 7 1/2" 1559823012 8 1/4" 1559833 9 --- 1559843 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. 03.0140 Ga. Color Size Art # Size 1 6 Yellow 5/16" 1559821056 2 3/8" 1559821038 UL LISTED PARTS FILE #E141071

CRIMP/SOLDER/SEAL CONNECTORS Features and Benefits... High quality crimp connectors provide a secure mechanical connection. Pre-fluxed low temperature solder delivers superior current flow and tensile strength. Adhesive-lined heat shrink tubing allows for visual inspection and provides a seal against corrosion. Crimped, soldered and sealed connections meets or exceeds the most stringent OEM standards. UL LISTED PARTS FILE #E141071 The Ultimate 3-Way Connection Crimped Mechanical Reliability Easy Installation Soldered Additional Strength Better Conductivity Exact, Pre-Measured Solder Sealed Durable Insulation Watertight Connection The Ultimate Connection... Cut-Away View Cut-Away View 2011 WURTH USA, Inc. Revision 08/2011 1 Crimp area Solder sleeve Crimp area Crimp area Solder sleeve Strip wires 3/8 and insert wire into the proper size connector barrel. 3 Apply heat evenly along connector from center out. 2 Seat wires and crimp the connector using an insulated crimping tool. Do not crimp the solder sleeve. 4 Finished product 03.0145 Advantages... Improved wire contact with pre-measured solder Eliminates voltage drops with improved current flow Eliminates connector failure due to vibration and strain Allows visual inspection of soldered section Meets or exceeds most stringent OEM standards Superior 3-Way tensile strength with Crimp + Solder + Seal Prevents wiring failure due to corrosion

CRIMP/SOLDER/SEAL CONNECTORS (CONTINUED) female male 1 2 3 4 5 6 7 Gauge Size Color Size Art # 1 1559951214 1/4" 2 1559951114 3 #8 155991108 4 22-18 Red #10 155991110 5 1/4" 155991114 6 #10 155993110 7 --- 1559941 female male 1 2 3 4 5 6 7 8 9 2011 WURTH USA, Inc. Revision 05/2014 Gauge Size Color Size Art # 1 1559952214 1/4" 2 1559952114 3 16-14 Blue #8 155991208 4 #10 155991210 5 1/4" 155991214 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. 6 03.0150 Gauge Size Color Size Art # 5/16" 155991256 7 3/8" 155991238 16-14 Blue 8 #10 155993210 9 --- 1559942 UL LISTED PARTS FILE #E141071

CRIMP/SOLDER/SEAL CONNECTORS (CONTINUED) female male 1 2 3 4 5 Gauge Size Color Size Art # 1 1559953214 2 1/4" 1559953114 3 12-10 Yellow 155991314 4 3/8" 155991338 5 --- 1559943 UL LISTED PARTS FILE #E141071 CROSSOVERS 2011 WURTH USA, Inc. Revision 05/2014 Turbo-Lite See Tool Section Art. # 1702 612 Ultra-Therm Heat Gun (Flameless) See Tool Section Art. # 1702 613 03.0155

IN-LINE BUTT CONNECTORS Join Two Wires to One Wire... THE COMPONENTS THE MULTIPLE WIRE CONNECTOR Color dash on tubing indicates the wire gauge for the connector Window for visual inspection Color stripes on the connector indicate which crimp die to use Crimp indicator Uniform copper wall - EASY to crimp Crimp indicator Tubing has an active adhesive that seals between multiple wires 15555720 15555716 Wire Gauge Tubing Color 24-22 Clear/White Dashes 20-18 Clear/Red Dashes 16-14 Clear/Blue Dashes 12-10 Clear/Yellow Dashes Color Stripe on Connect. Side 1: White Side 2: Red Side 1: Red Side 2: Blue Side 1: Blue Side 2: Yellow Side 1: Yellow Side 2: Red Wire One 24-22 Two 24-22 One 20-18 Two 20-18 One 16-14 Two 16-14 One 12-10 Two 12-10 15555714 15555710 Crimp Die (Ins) White (24-22) Red (20-18) Red (20-18) Blue (16-14) Blue (16-14) Yel (12-10) Yel (12-10) Red (8) Art # 15555720 15555716 15555714 15555710 THE IN-LINE BUTT CONNECTOR IS THE SOLUTION FOR THE EXISTING PROBLEMS: Quick-Tap 3-way connector Adding wire Unsealed connector The inside AND the outside diameter of the connector is varied which means that both sides will make a sound mechanical crimp. The barrel has two stripes - one on each end - to indicate which wire size to insert. Plus, the stripe matches the crimp die that needs to be used. For example, the blue stripe indicates the side where a 14 or 16 AWG wire is to be inserted, and it will be crimped in the blue crimp die. STRONG MECHANICAL TERMINATION! ADDITIONAL FEATURES OF THE CRIMP CONNECTOR Seamless butt connectors provide superior crimp performance Window in butt connectors allows for visual inspection to ensure all wires are fully inserted Butt connectors have indicators where the installation tool should be positioned to crimp connector Wire-stop in butt connector prevents over-insertion of the wires 1 2 3 4 THE HEAT SHRINK TUBING 2011 WURTH USA, Inc. Revision 08/2011 STRIP WIRES & INSERT CRIMP IT HEAT IT SEAL IT High adhesive-flow polyolefin to seal multiple wires Color-coded dash on tubing to indicate the wire gauge for the connector Clear tubing to allow for visual inspection 03.0160

CLOSED-END CONNECTORS Join Two to Four Wires... Tubing has an active adhesive that seals multiple wires and eliminates wire pull-out ADDITIONAL FEATURES OF THE CLOSED-END CONNECTOR Crimp termination provides superior mechanical performance High adhesive-flow polyolefin tubing to seal multiple wires Color-coded dash on tubing to indicate the size of the connector Clear tubing to allow for visual inspection Closed-end connectors are crimped here. In environments where corrosion and/or vibration are a problem, the closed-end connector can be used to replaced wire nuts. 155882214 155881810 Connector Wire Range Tubing Color Art # 22-14 Clear/Blue Dashes 155882214 18-10 Clear/Yellow Dashes 155881810 THE CLOSED-END CONNECTOR IS THE SOLUTION FOR THE EXISTING PROBLEMS: How to read chart for 155882214: One #16 Stranded plus three #22 Stranded (equaling four wires) can be connected using an 155882214 connector. Wire Nut End-Cap 1 2 3 4 2011 WURTH USA, Inc. Revision 08/2011 STRIP WIRES & INSERT CRIMP IT HEAT IT SEAL IT How to read chart for 155881810: One #12 Stranded plus three #18 Stranded (equaling four wires) can be connected using an 155881810 connector. 03.0165

CRIMP 0-RING CONNECTORS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Connectors are shown actual size 2011 WURTH USA, Inc. Revision 05/2014 Check out our External Star Washers (Art. #s 1423...) in Section 5, to be used with all ring connectors. 03.0170

CRIMP RING CONNECTORS (CONTINUED) Gauge Cross-section Flange hole Cable entry in in mm 2 mm Material thickness approx. in mm Length x Art. # width approx. in mm 26.5 x 11.0 05579219 1 2 10-8 6.0-16.0 M6 M8 6.0 x 4.3 8.0 x 4.3 1.20 31.5 x 15.0 05579220 3 M10 10.0 x 4.3 35.5 x 19.0 05579221 4 M6 6.0 x 5.4 29.4 x 11.0 05579223 5 8-4 10.0-25.0 M8 8.0 x 5.4 1.50 34.4 x 15.0 05579224 6 M10 10.0 x 5.4 38.4 x 19.0 05579225 7 16.0-35.0 M8 8.0 x 6.8 1.80 37.5 x 15.0 05579228 8 25.0-50.0 M8 8.0 x 8.2 2.00 40.5 x 15.0 055792281 6-2 9 M10 10.0 x 6.8 41.5 x 19.0 05579229 16.0-35.0 1.80 10 M12 12.0 x 6.8 46.0 x 22.0 05579230 11 M10 10.0 x 8.2 44.5 x 19.0 05579233 4-1 25.0-50.0 2.00 12 M12 12.0 x 8.2 49.0 x 22.0 05579234 13 2-2/0 35.0-70.0 M8 8.0 x 9.5 2.50 44.4 x 17.0 05579236 14 M10 10.0 x 11.2 54.5 x 21.0 05579240 1-3/0 50.0-95.0 3.00 15 M12 12.0 x 11.2 58.0 x 22.0 05579241 2011 WURTH USA, Inc. Revision 05/2014 03.0171

UNIVERSAL UNINSULATED CONNECTORS 1 2 3 4 5 6 7 8 9 10 11 Gauge Size Size Art # 1 05585029 22-18 1/8" 2 05586010 3 16-14 3/16" 05585312 4 22-18 05585040 5 1/4" 055845040 16-14 6 0558929 7 16-14 8 Gauge Size Size Art # 1/4" 9 12-10 5/16" 05586032 (w/locking tab) 05585047 05585020 (w/locking tab) 10 3/8" 05585266 11 22-18 1/8" 05589923 (w/locking tab) 1 2 3 4 5 6 7 8 9 2011 WURTH USA, Inc. Revision 05/2014 1 22-18 2 Gauge Size Size Art # 16-14 1/8" 05589955 (w/locking tab) 05589956 (w/locking tab) 3 3/16" 05589921 4 22-18 1/4" 05589919 (w/locking tab) 5 05589916 6 7 03.0175 Gauge Size Size Art # 16-14 8 12-10 1/4" 05589925 9 --- 0558928 05589917 (w/locking tab) 05589962 (w/locking tab)

UNIVERSAL UNINSULATED CONNECTORS (CONTINUED) 1 2 3 4 5 6 7 8 9 1 22-18 2 3 Gauge Size Size Art # 16-14 1/4" 05585143 05589941 (w/locking tab) 05586302 (w/locking tab) 4 05589961 5 1/8" 05585144 Gauge Size Size Art # 6 05585135 22-18 7 05589960 1/4" 8 16-14 05585054 9 12-10 05589963 1 2 3 4 5 6 7 8 2015 Wurth USA, Inc. Revision_01/2015 Gauge Size Size Art # 1 --- 0558930 22-18 2 --- 05585038 3 --- 05585051 16-14 4 --- 05585133 03.0180 Gauge Size Size Art # 5 #8 05585215 6 #10 05585217 16-14 7 #12 05585219 8 5/16" 05585221

UNIVERSAL UNINSULATED CONNECTORS (CONTINUED) 1 2 3 4 5 6 7 8 9 10 Gauge Size Size Art # 1 #10 055816061 1/4" terminal 2 1/4" 05581935 05589909 (w/locking 3 --- tab) 22-18 4 --- 05589967 5 --- 05589972 6 Gauge Size Size Art # 7 --- 16-14 8 --- --- 05589973 05589969 (w/locking tab) 055899100 (w/locking tab) 9 055899570 1/8" 10 05589924 1 2 3 4 5 6 7 8 2011 WURTH USA, Inc. Revision 05/2014 Gauge Size Art # 1 05589901 16-14 2 05589902 3 05589908 20-16 4 05589907 5 16-14 05589971 6 22-18 05589964 7 --- 05581810 8 --- 05581809 03.0185

BMW CONNECTORS 1 2 3 4 5 6 7 8 9 10 11 12 13 Gauge Size Size Art # 1 05586010 #4 2 05589922 22-18 3 05585040 4 1/4" 05589916 5 05586032 16-14 6 --- 05589973 7 18-14 1/4" 05586431 Gauge Size Size Art # 8 1/4" 05589918 9 18-14 --- 05589905 10 --- 05589906 11 20-16 --- 05589907 12 18-16 --- 05589909 13 16-14 #4 05589911 MERCEDES BENZ CONNECTORS Gauge Size Size Art # 1 05589925 18-14 2 1/4" 05589928 3 20-14 05589935 1 2 3 BUTT CONNECTORS 2011 WURTH USA, Inc. Revision 08/2011 Gauge Size Art # 1 12-10 155715812 2 16-14 155715816 3 22-18 155715818 1 2 3 03.0190

OEM TERMINAL CONNECTORS - FORD Gauge Size OEM # Art # D8BB-14474-BA 1558142002 20-18 D3AB-14474-DA OEM TERMINAL CONNECTORS - GM 1 2 3 4 5 Gauge Size Size OEM # Art # 1 --- 2965142 1558351605 16-14 2 5/16" 2973216 1558341604 3 20-18 --- 12034053 1558342007 12004610 4 20-16 --- 12047767 1558342010 4368618 5 20-18 --- 12048074 1558342002 2011 Wurth USA, Inc. Revision 10/2014 03.0195

OEM TERMINAL CONNECTORS - GM (CONTINUED) 1 2 3 4 5 6 Gauge Size OEM # Art # 1 12047680 1558342009 12052922 1558342013 2 20-18 12089340 3 12034046 1558342011 4 12015857 1558341801 18-14 5 12020116 1558351801 6 16-14 12015870 1558341609 1 2 3 4 5 6 7 8 9 2011 WURTH USA, Inc. Revision 08/2011 Gauge Size Max Amp OEM # Art # 1 20-18 --- 12020757 1558342008 2 --- 12020347 1558341401 3 16-14 8900524 1558352004 --- 12020320 4 6294512 1558342012 --- 20-18 14020346 5 --- 6294511 1558352002 03.0200 Gauge Size Max Amp OEM # Art # 12015917 1558341202 6 20 12124581 12 12089306 1558351202 7 20 12124587 12010085 1558341607 8 --- 12124580 16-14 12010085 1558351604 9 --- 12089305

OEM TERMINAL CONNECTORS - GM (CONTINUED) 1 2 3 4 Gauge Size Size OEM # Art # 2965470 1558440001 1 1/4" 2096466 20-18 C5AB- 14474-B 2 --- 12014837 15589104 3 --- 12014836 15585103 4 --- --- 12010300 15589101 2011 WURTH USA, Inc. Revision 08/2011 03.0205

CAVITY CONNECTORS 1 Cavity Connectors OEM Mates Art # Male 12015791 Female 12010996 155591031 155591021 155591021 155591031 2 Cavity Connectors OEM Mates Art # Male 155591032 155591022 12010973 Female 155591022 155591032 12015792 3 Cavity Connectors OEM Mates Art # Male 155591033 155591023 12015793 Female 155591023 155591033 12010717 4 Cavity Connectors OEM Mates Art # Male 1555910241 155591034 1201577 Female 12010974 155591034 1555910241 2011 WURTH USA, Inc. Revision 08/2011 03.0210

2015 Wurth USA, Inc. Revision 05/2015 03.0211

DEUTSCH CONNECTORS OVERVIEW Deutsch Connectors are environmentally-sealed transportation connectors that can be found in motorcycles, automobiles, trucks, tractors, and heavy-duty and industrial equipment. The line is made up of Receptacles and Plugs, with corresponding Locking Wedges for each (making up the Deutsch Connector housings), as well as Pins and Sockets (which come in Solid and Stamped varieties and are inserted into the housings to complete the assembly of the connector). Deutsch Connector Tools are offered for the removal of terminals from the housings and to crimp wires onto the Solid Pins and Solid Sockets. When assembling, remember that pins insert into receptacles and sockets insert into plugs. Features Common contact system utilizes common tooling Stainless steel sleeves over contact fingers protects them from damage, increasing socket-terminal performance Properly crimped connections are air-tight Made from flame-retardant, high grade thermoplastics to reduce the risk of fire Operating temperature: -55 C to +125 C (-67 F to +257 F) Fail-safe connector assembly ensures the locking wedge can only be inserted and the connectors can only be coupled if the wedges are fully inserted Withstand intense physical shock and vibration 2015 Wurth USA, Inc. Revision 05/2015 03.0212

DEUTSCH CONNECTORS - QUICK ARTICLE NUMBER REFERENCE GUIDES DT Series Number of Pins Plug Plug Locking Wedge Article # Receptacle 2 055520021 0555209102 055520020 0555209002 3 055520031 0555209103 055520030 0555209003 4 055520041 0555209104 055520040 0555209004 6 055520061 0555209106 055520060 0555209006 8 055520081 0555209108 055520080 0555209008 12 0555200121 0555209112 0555200120 0555209012 Type Sockets Receptacle Locking Wedge 16-20 AWG 14-16 AWG 14 AWG 16-20 AWG 14-16 AWG 14 AWG Solid Crimp Contact 0558203002 0558203004 0558203102 0558203104 Stamped & Formed Contact 0558204003 0558204103 Pins DTM Series Number of Pins Article # Plug Plug Locking Wedge Receptacle Receptacle Locking Wedge 2 055520421 0555209502 055520420 0555209402 3 055520431 0555209503 055520430 0555209403 4 055520441 0555209504 055520440 0555209404 6 055520461 0555209506 055520460 0555209406 8 055520481 0555209508 055520480 0555209408 12 0555204121 0555209512 0555204120 0555209412 Type Sockets 16-22 AWG 20 AWG 16-22 AWG 20 AWG Solid Crimp Contact 0558203001 0558203101 Stamped & Formed Contact 0558204001 0558204101 Pins 2015 Wurth USA, Inc. Revision 05/2015 DTP Series Number of Pins 03.0213 Article # Plug Plug Locking Wedge Receptacle Receptacle Locking Wedge 2 055520221 0555209302 055520220 0555209202 4 055520241 0555209304 055520240 0555209204 Type Sockets (12-14 AWG) Pins (12-14 AWG) Solid Crimp Contact 0558203005 0558203105 Stamped & Formed Contact 0558204005 0558204105

DEUTSCH CONNECTORS - DT GENERAL PURPOSE SERIES Features Designed to accommodate for mid-range gauge wiring DT Series connectors are applicable for cable-to-cable applications in or around the engine or transmission areas, on the chassis, or in the cabin DT Series connectors will provide the reliability and performance on signal level circuits in harsh environmental conditions, where even a small degradation in connection may be critical Accomodates wire sizes from 14-20 AWG Current rating: 13 amps Contacts withstand a load of 25 lbs.for size 16 Thermoplastic housings and silicone seals Contact insertion and withdrawl require no special tools Secondary locks Audible coupling feedback Environmentally sealed connections designed for cable to cable applications under the hood, on the chassis or in the cab Article # Description No.of Pins Reference # 055520021 Plug 2 DT06-2S 055520031 Plug 3 DT06-3S 055520041 Plug 4 DT06-4S 055520061 Plug 6 DT06-6S 055520081 Plug 8 DT06-08SA 0555200121 Plug 12 DT06-12SA 0555209102 Plug Locking Wedge 2 W2S 0555209103 Plug Locking Wedge 3 W3S 0555209104 Plug Locking Wedge 4 W4S 0555209106 Plug Locking Wedge 6 W6S 0555209108 Plug Locking Wedge 8 W8S 0555209112 Plug Locking Wedge 12 W12S 055520020 Receptacle 2 DT04-2P 055520030 Receptacle 3 DT04-3P 055520040 Receptacle 4 DT04-4P 055520060 Receptacle 6 DT04-6P 055520080 Receptacle 8 DT04-08PA 0555200120 Receptacle 12 DT04-12PA 0555209002 Receptacle Locking Wedge 2 W2P 0555209003 Receptacle Locking Wedge 3 W3P 0555209004 Receptacle Locking Wedge 4 W4P 0555209006 Receptacle Locking Wedge 6 W6P 0555209008 Receptacle Locking Wedge 8 W8P 0555209012 Receptacle Locking Wedge 12 W12P Article # Type Style Size Reference # 0558203102 Pin Solid Crimp Contact 16-20 AWG 0460-202-16141 0558203002 Socket Solid Crimp Contact 16-20 AWG 0462-201-16141 0558203104 Pin Solid Crimp Contact 14 AWG 0460-215-16141 0558203004 Socket Solid Crimp Contact 14 AWG 0462-209-16141 0558204103 Pin Stamped & Formed Contact 14-16 AWG 1060-14-0122 0558204003 Socket Stamped & Formed Contact 14-16 AWG 1062-14-0122 2015 Wurth USA, Inc. Revision 05/2015 03.0214

DEUTSCH CONNECTORS - DTM MINIATURE SERIES No. Reference Article # Description of Pins Number 055520421 Plug 2 DTM06-2S 055520431 Plug 3 DTM06-3S 055520441 Plug 4 DTM06-4S Features The DTM Series of connectors represents the miniature series of Deutsch Connectors Designed to accommodate for smaller gauge wiring The use of the DTM Series connectors is applicable for critical operating circuits that are found in or around the engine or transmission areas The DTM Series connectors are used in harsh environmental applications where reliable signal circuits are critical to operating performance. Optimal for use with Motorcycles that use smaller gauge wiring and have tight working access Accomodates 16-22 AWG wire (can be used with 24 AWG, but is not recommended) 20 GA-7.5 Amps continuous Contact retention up to 20 lbs. Silicone seals at front and rear provide water tight sealing Good for compact spaces 055520461 Plug 6 DTM06-6S 055520481 Plug 8 DTM06-8S 0555204121 Plug 12 DTM06-12S 0555209502 Plug Locking Wedge 2 WM-2S 0555209503 Plug Locking Wedge 3 WM-3S 0555209504 Plug Locking Wedge 4 WM-4S 0555209506 Plug Locking Wedge 6 WM-6S 0555209508 Plug Locking Wedge 8 WM-8S 0555209512 Plug Locking Wedge 12 WM-12S 055520420 Receptacle 2 DTM04-2P 055520430 Receptacle 3 DTM04-3P 055520440 Receptacle 4 DTM04-4P 055520460 Receptacle 6 DTM04-6P 055520480 Receptacle 8 DTM04-08PA 0555204120 Receptacle 12 DTM04-12PA 0555209402 Receptacle Locking Wedge 2 WM-2P 2015 Wurth USA, Inc. Revision 05/2015 Article # Type Style Size Reference # 0558203101 Pin Solid Crimp Contact 0558203001 Socket Solid Crimp Contact 0558204101 Pin Stamped & Formed Contact 0558204001 Socket Stamped & Formed Contact 20 AWG 0460-202- 20141 20 AWG 0462-201- 20141 16-22 1060-20-0122 AWG 16-22 AWG 1062-20-0122 03.0215 0555209403 Receptacle Locking Wedge 0555209404 Receptacle Locking Wedge 0555209406 Receptacle Locking Wedge 0555209408 Receptacle Locking Wedge 0555209412 Receptacle Locking Wedge 3 WM-3P 4 WM-4P 6 WM-6P 8 WM-8P 12 WM-12P

DEUTSCH CONNECTORS - DTP POWER SERIES Features Article # Description No.of Pins Reference # 055520221 Plug 2 DTP06-2S 055520241 Plug 4 DTP06-4S 0555209302 Plug Locking Wedge 2 WP-2S 0555209304 Plug Locking Wedge 4 WP-4S 055520220 Receptacle 2 DTP04-2P 055520240 Receptacle 4 DTP04-4P 0555209202 Receptacle Locking Wedge 2 WP-2P 0555209204 Receptacle Locking Wedge 4 WP-4P The DTP Series of connectors represents the Power series of Deutsch Connectors Designed to accommodate for larger gauge wiring The DTP Series is designed to accommodate for higher amperage, multi-pin applications Meets the same specifications as the DT and DTM Series, while offering the ability to use multiple 10-14 gauge contacts, each with a 25 amp continuous capacity (all within a single sealed shell) Accomodates wire sizes from 10-14 AWG 25 amps continuous at -125 C (257 F) Multi-pin power connector Environmentally sealed Two and four pin arrangements Corrosion resistance: 48 hours of salt spray per MIL-STD 1344, method 1001 2015 Wurth USA, Inc. Revision 05/2015 Article # Type Style Size Reference # 0558203105 Pin Solid Crimp Contact 12-14 AWG 0460-204-12141 0558203005 Socket Solid Crimp Contact 12-14 AWG 0462-203-12141 0558204105 Pin Stamped & Formed Contact 12-14 AWG 1060-12-0166 0558204005 Socket Stamped & Formed Contact 12-14 AWG 1062-12-0166 03.0216

SOLID COMPACT CRIMPING TOOLS Features Creates a four-indent crimp providing the most uniform displacement of wire and contact material Ratchet design ensures full crimp is completed For solid contacts Description Contact Size Deutsch Connector Reference # Article # Solid Contact Crimp Tool 20 AWG AMSC20/A-1 171355520 Solid Contact Crimp Tool 14-16 AWG AMSC16/A-1 171355516 Solid Contact Crimp Tool 12 AWG AMSC12/A-1 171355514 PLASTIC TERMINAL REMOVAL TOOLS For the removal of contact/wire assemblies from DT series plugs. Application 1. With rear insert toward you, snap appropriate size extractor tool over the wire of contact to be removed. 2. Slide tool along wire into the insert cavity until it engages contact and resistance is felt. 3. Pull contact/wire assembly out of connector. NOTE: Do not twist tool or insert at an angle. Description Color Contact Size Deutsch Connector Reference # Article # Plastic Terminal Removal Tool Red 20 AWG 0411-240-2005 0713558910 Plastic Terminal Removal Tool Blue 16 AWG 0411-310-1605 0713558920 Plastic Terminal Removal Tool Yellow 4, 8, & 12 AWG 114010 0713558930 UNIVERSAL SEALING PLUG NOTE: Use the Universal Sealing Plug to cover unused socket connections Description Contact Size Deutsch Connector Reference # Article # 2015 Wurth USA, Inc. Revision 05/2015 Universal Sealing Plug 12-20 AWG 114017 0555208001 03.0217

MULTIPLE PLUG CONNECTOR BLOCKS For flat connector terminals Plug in width 6.3 x 0.8mm terminals Cable diameter up to 6mm2 Made from polyamide, natural Temperature resistance from -40ºF to 176ºF Plug in Connections Number/Type Art # 1/1 horizontal (-) 05551001 2/2 horizontal (=) 05551002 2/1 horiz. & 1 vert. ( -) 055510022 3/2 horiz. & 1 vert. (= ) 05551003 4/4 horizontal (==) 05551004 6/6 horizontal (===) 05551006 Flat Male Connector Terminals (for Connector Blocks above) With locking tongue Gauge Art # 1 22-18 05589960 2 20-16 05589935 1 2 3 3 20-16 05585054* *Brass Plug in Connections Number/Type Art # 1/1 horizontal (-) 055510011 2/2 horizontal (=) 055510021 2/1 horiz. & 1 vert. ( -) 055510023 3/2 horiz. & 1 vert. (= ) 055510031 4/4 horizontal (==) 055510041 Female Connector Terminals (for Connector Blocks above) With locking tongue 2015 Wurth USA, Inc. Revision 05/2015 1 2 3 4 Gauge Art # 1 22-18 05589916 2 18-14 05589917 3 18-14 05586032* 4 12-10 05589962 *Brass 03.0218

FLAT PLUG CONNECTORS Art. # 055511 05552 Dimensions (L x W in mm) 54 x 21 152 x 25.8 Plugging Width (in mm) 6.3 6.3 Number of Connections 1-2 12 Max Voltage (V) 300 300 Max Temperature ( F) 167 F 167 F Art. # 0555 11 Art. # 0555 2 TERMINALS 1 2 3 Description Material Gauge Art. # GM Weather Pack Series - Male, 155815948 Tin Plated 16-14 Mates with 155815937 GM Weather Pack Series - Female 1558341607 Tin Plated 16-14 Mates with 155815948 GM Weather Pack Series Cable 155814152 Green Seal - Mates with 155815948 Silicone and 15581415 1 2 3 2011 WURTH USA, Inc. Revision 05/2014 03.0220

TEE TAPS Gauge Color Tee Tap Art. # Male Disconnect Art. # 22-18 Red 0555951 05559511 14-16 Blue 0555952 05559521 10-12 Yellow 0555953 05559531 4 Easy Steps... 1 2 3 4 Connects tap wires to power or ground wires Penetrates insulation and makes positive contact when crimped Mates with special 1/4 male quick disconnect Color coded for easy identification SCOTCHLOC WITH GEL Gel filled connector provides a moisture resistant barrier to destructive substances Special locking feature of cap insures a protected connection over time No cutting or stripping is required, making connections easier and faster Withstands continuous operating temperatures of -40ºF to 167ºF Description Color Gauge Art. # Scotchloc with Gel Blue 16-18 15555649 2011 WURTH USA, Inc. Revision 08/2011 03.0225

SCOTCHLOC TAP CONNECTORS Produces pre-insulated splices without stripping, twisting or soldering. No wiring or special tools required. Color coded for easy identification. Gauge Tap Run Color Wire Stop Art. # 16-18 Red Yes 0555557 14-18 14-16 - 18 White No 1555566 12-16 Blue Yes 0555564 18-14 Brown Yes 1555567 10-12 10-12 Yellow Yes 0555562 WIRE NUTS Joins Min. Max. Color Art. # 18-14 ga. 2 # 18 ga. 3 # 16 ga. 05599900 Orange 1 # 18 ga. 18-12 ga. 1 # 14 ga. 2 # 14 ga. 05599901 Yellow 1 # 18 ga. 3 # 16 ga. 18-10 ga. 1 # 12 ga. 2 # 10 ga. 05599902 Red 2 # 18 ga. 1 # 12 ga. 18 & 16 ga. 2 # 18 ga. 2 # 16 ga. Gray 05599903 2011 WURTH USA, Inc. Revision 08/2011 03.0230

ATO / ATC FUSE HOLDER Use with ATC & ATO blade type fuses up to 40 Amp Amp. Length Gauge Strands Art. # 40 Amp. 12" 10 Ga. 105 172520320 CRIMP ON ATO/ATC IN-LINE FUSE HOLDER Use with blade type fuses up to 20 amp. Use with 18-14 gauge wire. Quick three step installation. Description Art. # In-Line ATO/ATC Fuse Holder Crimp On 0725972 1 2 3 Cut wire Slide wires into holder Snap lid closed & insert fuse ATO / ATC IN-LINE FUSE HOLDER For use with ATO fuses up to 30 amp. in A/C or other applications Supplied with two 4 leads of 12 gauge wire Fuse not included 2011 WURTH USA, Inc. Revision 05/2014 Description Art. # ATC In-Line Fuse Holder 07251002 03.0235

ATO/ATC FUSE HOLDER Resistant to moisture, salt spray and engine compartments fluids Withstands 50g physical shock Operating temperature range from -40º to 257ºF Nylon body with latching cap Silicone rubber seals at wire and cap 12 gauge GXL wire leads 9 length 3 to 30 amp. capacity ATC/ATO fuses Description Art. # ATO/ATC Fuse Holder 07256204 MAXI FUSE IN-LINE FUSE HOLDER For use with ATO Maxi fuses up to 60 amp. Supplied with two 6 leads of 6 gauge wire and protective cover. Mounting hole permits easy firewall installation. Description Art. # Maxi Fuse In-Line Fuse Holder 0725975 mounting hole GLASS FUSE HOLDER For all 1/4 diam. fuses 5/8 to 1-1/4 long Supplied with 8 of 14 gauge wire Constructed of weather resistant nylon Simple twist lock allows for easy fuse removal and replacement Description Art. # Glass Fuse Holder 07251001 HOLDER FOR CERAMIC FUSES For ceramic strip fuse (including 8 A ceramic fuse) Up to 2.5mm 2, 5-25 amps With bayonet catch 2011 WURTH USA, Inc. Revision 08/2011 Description Art. # Holder for Ceramic Fuses 0555625 03.0240

ADD-A-LINE BLADE FUSE TAP Plugs into any fuse slot, even if that slot has a fuse installed Allows you to add an additional circuit to an existing circuit while providing protection for both Since there is no altering the existing circuits by cutting wires and the potential danger of creating a short circuit, installation does not void factory warranties or interfere with today s sophisticated on-board computer systems No cutting, splicing or drilling required Add any accessory, up to 10 amps, such as: Car phone, fax machine, radar detector, CD player, beverage cooler/warmer...just to name a few Description Art. # Add-A-Line Blade Fuse Tap 15590005 MINI FUSE ADD-A-CIRCUIT Same as ATO Add-A-Circuit except for use with MINI fuses up to 10 amps Description Art. # MINI Fuse Add-A-Line Circuit 15590006 FUSE TAPS/SPECIAL ADAPTERS Description Art. # 1 ATO Spade Take-off - Regular Blade Fuse Tap 05590003 2 3-Way Adapter 15590091 3 ATO Spade Take-off - Mini Blade Fuse Tap 15590004 4 Piggy Back DBL Male Adapter 0558928 1 2011 WURTH USA, Inc. Revision 05/2014 2 3 4 03.0245

MINI FUSE HOLDER WITH CAP Use with MINI Fuse 2 to 20 amps Supplied with two 4 wire leads of 14 gauge black wire Includes protective cap for harsh environment Description Art. # MINI Fuse Holder with Cap 1725973 FUSIBLE LINKS Withstands high levels of current and high temperatures for extended periods Amp. Color Type Art. # 30 Pink mini female 17709130 40 Green mini female 17709140 20 Lt. Blue female 17709220 30 Pink female 17709230 40 Green female 17709240 60 Yellow female 17709260 30 Pink male 17709330 60 Yellow male 17709360 80 Black male 17709380 100 Blue male 177093100 120 White male 177093120 30 Pink bolt-through 17709430 40 Green bolt-through 17709440 70 Brown bolt-through 17709470 100 Blue bolt-through 177094100 Male Female Bolt-through MINI BLADE FUSES Meet the OEM need to protect a greater number of circuits without utilizing more space Features silver plated blades and Littlefuse designed industry standard color coding to indicate amp rating Fuse provides reliable vehicle circuit protection in a compact, miniature size. Color coded to match ATO blade fuses. 2011 WURTH USA, Inc. Revision 05/2014 Amp. Color Art. # 2 Black 1731102 3 Purple 1731103 4 Orange 1731104 5 Yellow 1731105 7.5 Brown 1731175 10 Red 1731110 15 Blue 1731115 20 Yellow 1731120 25 Clear 1731125 30 Green 1731130 03.0246

ATO BLADE FUSES Developed for the automotive industry, the ATO fuse has become the original equipment circuit protection standard for foreign and domestic automobiles and trucks. Readily identifiable and easily replaced, this fuse can be specified for a variety of low voltage electronic applications. Found on most cars, trucks, buses and off road vehicles world-wide Designed to industry standard color coding to indicate amp rating Amp. Color Art. # 1 Black 0731001 2 Grey 0731002 3 Purple 0731003 4 Pink 0731004 5 Gold 0731005 7.5 Brown 07310075 10 Red 0731010 15 Blue 0731015 20 Yellow 0731020 25 Grey 0731025 30 Green 0731030 40 Amber 0731040 Specifications Voltage rating: Interrupting rating: Operating Temp. Range: Terminals: 32 VDC 1000A @ 32 VDC -40 C to +105 C (Ag=40 C to +125 C) Silver plated zinc alloy Complies with: ISO 8820-3 UL Listed: File AU1410 CSA Certified: File No. 29862 MAXI BLADE FUSES Primarily used for under hood applications and are produced with a high temperature polymer and silver plated blades Replace the commonly used fusible wire or fusible link to protect a high current segment or system of the wiring harness Designed to industry standard color coding to indicate amp rating Replaces the commonly used fusible wire or link to protect a high current segment or system of the wiring harness. Amp. Color Art. # Specifications 20 Yellow 1731220 30 Green 1731230 Voltage rating: Interrupting rating: 32 VDC 1000A @ 32 VDC 2015 Wurth USA, Inc. Revision 06/2015 40 Orange 1731240 50 Red 1731250 60 Blue 1731260 70 Amber 1731270 80 Natural 1731280 Operating Temp. Range: Terminals: Complies with: -40 C to +125 C (Sn=-40 C to +105 C) Ag plated zinc alloy SAE J 1888, ISO 8820-3 2002(E) (Sn Fuse not UL recognized) 03.0250

COLE HERSE 8 POSITIVE FUSE BLOCK ATO/ATC fuse block 8 circuit, 3.1 1x3, 4 wide, 0.8 high Recessed fuse contacts, no cover required Black thermoplastic Description Art. # Cole Herse 8 Positive Fuse Block 155846377 LOW PROFILE MINI FUSE Lower overall height allows for more space and weight savings Designed to mate with tuning-fork terminals 32 VDC Fast-acting Amp. Color Art. # 2 Black 1731302 5 Gold 1731305 7.5 Brown 17313075 10 Red 1731310 15 Blue 1731315 20 Yellow 1731320 25 Clear 1731325 30 Green 1731330 MOTOR FUSES Ceramic type, torpedo shaped. Found in many European Cars. 25mm length, 100 per pack. 2015 Wurth USA, Inc. Revision 06/2015 Amp. Color Element Art. # 8 White Copper 073002508 16 Red Copper 073002516 25 Blue Copper 073002525 5 Yellow Aluminum 0730255 8 White Aluminum 0730258 15 White Aluminum 07302515 16 Red Aluminum 073025161 25 Blue Aluminum 07302525 40 Black Aluminum 07302540 03.0255

MICRO2 TM BLADE FUSES The Micro2 TM Blade Fuse is the new standard for vehicle circuit protection. Its sub-miniature design meets the need for more circuits to be protected while utilizing less space and its ability to cope with high temperatures in adverse environments makes the Micro2 TM Fuse the recommended choice for protection. Specifications Voltage Rating: 32 VDC Interrupting Ratings: 1000A @ 32 VDC Operating Temperature Range: - 40 C to +125 C (- 40 F to +257 F) Time-Current Characteristics % of Rating Opening Time Min/Max 110 100 h / - 135 0.75 sec / 120 sec 160 0.30 sec / 50 sec 200 0.15 sec / 5 sec 350 0.04 sec / 0.50 sec 600 0.02 sec/ 0.100 sec Current Rating (A) Housing Color Typ. Voltage Drop (mv) Cold Resistance (mω) I 2 t (A 2 s) Art # 5 Orange 116 17.4 17 073145005 Top View 7.5 Brown 106 10.8 47 0731450075 10 Red 102 7.7 89 073145010 15 Blue 94 4.8 189 073145015 3.8 mm LF 32V PAT PEN 20 Yellow 91 3.4 397 073145020 25 White 90 2.6 585 073145025 30 Green 88 2.1 1028 073145030 2011 WURTH USA, Inc. Revision 02/2012 03.0256

JCASE HIGH AMP FUSES Currently OEM on many new domestic and Japanese models Smaller space saving foot-print is being designed in by many OEM s Provides both increased time delay and low voltage drop Features ANSI standard OCR-A front inspectionsystems, double spring-beam box terminal and unique secondary locking feature holds terminal firmly in place Voltage Rating Characteristics : 32V AC/DC Slo-Blo Amp Color Art. # 1 20 Blue 17311020 2 30 Pink 17311030 3 40 Green 17311040 4 50 Red 17311050 5 60 Yellow 17311060 1 3 5 2 4 LOW PROFILE JCASE HIGH AMP FUSES The Low Profile JCase fuse has similar performance characteristics as the standard JCase fuse. The lower overall height reduction allows for more space and weight savings and also allows for a shorter male blade terminal, saving additional weight and material savings in fuse box designs. 1 2 Voltage Rating Interrupting Rating 58 VDC 1000A @ 58 VDC 3 4 Operating Temperature Range -40 F to +257 F Insertion Force 53N Max (12lb.) Extraction Force 9N Min (2lb.) 5 Amp Color Art. # 1 20 Blue 17311220 2 30 Pink 17311230 3 40 Green 17311240 4 50 Red 17311250 5 60 Yellow 17311260 2011 WURTH USA, Inc. Revision 05/2014 03.0257

GLOW PLUG FUSES A strip of zinc metal for bolt on applications for many European diesel cars Amp. Art. # 50 073150 80 073180 GLASS FUSES (AG FUSES) Originally stood for all glass. The automotive industry uses the AG prefix (AGC, AGX) for most glass fuses SFE 14 All are 1/4 dia., but vary in length according to the ampere rating to ensure accurate fuse replacement. AGC 1/4 x 1-1/4 Amp. Length Art # 20 1-1/4" 173320 30 1-7/16" 173330 Amp. Art # 2 173292 3 173293 4 173294 5 173295 7.5 17329712 10 1732910 15 1732915 20 1732920 25 1732925 30 1732930 UNIVERSAL CIRCUIT BREAKER Universal blade type for heavy duty applications Automatic reset when power is removed from affected circuit 2011 WURTH USA, Inc. Revision 08/2011 Amp. Art. # 5 17340505 10 173405010 15 173405015 20 173405020 25 173405025 30 173405030 03.0260

FLASHER FOR U.S. CARS Replaces 12-volt, two terminal flashers Flashes two to three standard or long life lamps for turn signals Flashes two to six lamps for hazard warning Features durable, simplified flashing mechanism for increased reliability Meets D.O.T., S.A.E. and all applications state and federal requirements Description Art. # Littlefuse # FLR 536/552 17340536 FLASHER FOR IMPORT CARS & U.S. TRUCKS Replaces most 12 volt, three terminal flashers Flashes two to three standard or long life lamps for turn signals Separate pilot circuit Description Art. # Littlefuse # FLR 550 17340550 FLASHER FOR CARS & LIGHT TRUCKS Flashes two to three standard or long life turn signal lamps Flashes two to six lamps for hazard warning 12 volt, three terminal Description Art. # Littlefuse # FLR 569 17340569 HEAVY DUTY ELECTRONIC FLASHER 2011 WURTH USA, Inc. Revision 08/2011 Temperature comensation for an even flashing rate in all temperature ranges Thicker palladium contact for longer life under heavy loads Brass terminals for corrosion resistance 12 volt, 2 terminals Flashes 2 to 4 lamps turn signal Flashes 1 to 8 lamps hazard warning Description Art. # H.D. Electronic Flasher 17340012 03.0265

HEAVY DUTY CHARGER CLIPS 50 amp. clamp for small battery chargers, tune-up and test equipment Color-coded vinyl boots protect crimp ears Use for OEM repair & custom build Sold as one pair Description Art. # Heavy Duty Charger Clips 15104010 ALLIGATOR CLIPS & VINYL BOOTS Vinyl installation boots shield exposed metal Use to build custom test leads of any length Description Art. # 5 amp. clamps with screws 0558698 Red alligator boot 05586982 2011 WURTH USA, Inc. Revision 05/2014 03.0275

HEAVY DUTY LUGS Made of cast copper, tin plated for added conductivity and to resist corrosion 25 times better than SAE conductivity standard, J163 & J1811 Permanent, indelible, readable gauge & polarity stamped on clamp Made in North America Size Gauge Art. # 8 15575838 6 15575638 4 15575438 3/8" 1 15575138 1/0 155751038 2/0 155752038 1/2" 2/0 15572012 HIGH CONDUCTIVITY / HEAVY DUTY WALL LUGS Constructed of seamless tubular 100% electrolytic copper to ensure the highest conductivity Extra heavy wall thickness for the toughest conditions Electro-tin plated for corrosion protection RoHS compliant Color coded dual crimp identifies and matches cable size 2011 WURTH USA, Inc. Revision 08/2011 Gauge Stud Size Color Code Die Code Art. # 4 3/8" 1557438 Gray J-H 1/2" 1557412 1/4" 15571214 1-2 5/16" 155712516 Pink H-H 3/8" 1557138 1/2" 15571212 1/4" 15571014 1/0 5/16" 155710516 Black E-A 3/8" 15571038 1/2" 15571012 5/16" 155720516 2/0 3/8" Orange A-C 15572038 1/2" 15572012 3/0 3/8" 15573038 Purple A-B 1/2" 15573012 4/0 3/8" 15574038 Yellow A-A 1/2" 15574012 03.0280 Note: 1-2 gauge can be used for either 1 or 2 gauge

STANDARD WALL LUGS Electro-tin plated to provide maximum corrosion resistance (Tin Plated Only) Constructed of seamless tubular 100% electrolytic copper to ensure the highest conductivity UL listed copper terminal lug to ensure high quality Available in un-plated or tin-plated for corrosion protection Ideal for general wiring as well as starter wiring Can be crimped or soldered RoHS compliant Tin Plated Gauge Stud Size Art. # 8 15574814 6 15574614 4 1/4" 15574414 2 15574214 1 15574114 8 155748516 4 5/16" 155744516 2 155742516 8 15574838 6 15574638 4 15574438 2 15574238 1 3/8" 15574138 1/0 155741038 2/0 155742038 3/0 155743038 4/0 155744038 4 15574412 2 15574212 1 1/2" 15574112 1/0 155741012 2/0 155742012 2011 WURTH USA, Inc. Revision 05/2014 Unplated Tin Gauge Stud Size Art. # 4 15573438 2 15573238 1 15573138 3/8" 1/0 155731038 2/0 155732038 3/0 155733038 4 15573412 2 15573212 1 15573112 1/2" 1/0 155731012 2/0 155732012 3/0 155733012 03.0285

HEAVY CONDUCTIVITY BUTT SPLICES Constructed of seamless tubular 100% electrolytic copper to ensure highest conductivity Color coded dual crimp identifies and matches cable size RoHS compliant Electro-tin plated for corrosion protection Gauge Color Code Die Code Art. # 4 Gray J-H 15574001 1-2 Pink H-H 15571200 1/0 Black E-A 155710010 2/0 Orange A-C 155720010 3/0 Purple A-B 155730010 4/0 Yellow A-A 155740010 Note: 1-2 gauge can be used for either 1 or 2 gauge 2011 WURTH USA, Inc. Revision 05/2014 03.0290

HIGH CONDUCTIVITY / HEAVY DUTY STUD TOP TERMINALS These terminals are cast with 131 contact copper (93-95% copper) to ensure superior conductivity and ductility for the ability to crimp without cracking Electro-tin plating for complete coverage, better appearance, and corrosion resistance Exceed SAE conductivity standard J163 Connectors can be installed with adjustable crimping tools and are solderable (Art. No. 0558280 for WURTH Crimping Tool) RoHS compliant Color coded dual crimp identifies and matches cable size Raised lettering for easy identification of polarity, wire size and crimping codes Single Barrel Side Mount Gauge Stud Size Polarity Color Code Die Code Art. # 4 Green J-H 155754380 1-2 Pink H-H 155751380 3/8" Universal 1/0 Black E-A 1557510380 2/0 Orange A-C 1557520380 2/0* 3/8" Universal Orange A-C 155752138 * These terminals have accessory wire capability Note: 1-2 gauge can be used for either 1 or 2 gauge Double/Splice Side Mount Gauge Stud Size Polarity Color Code Die Code Art. # 1/0 Black E-A 1557510 2/0 3/8" Universal Orange A-C 1557520 3/0 Purple A-B 1557530 Single Barrel Top Mount Gauge Stud Size Polarity Color Code Die Code Art. # 2/0 3/8" Universal Orange A-C 15575201 2011 WURTH USA, Inc. Revision 05/2014 Double/Splice Top Mount Gauge Stud Size Polarity Color Code Die Code Art. # 2/0 3/8" Universal Orange A-C 15575202 03.0295

LOCK & STACKABLE TERMINALS Locks in numerous positions The exceptional lock ensures terminals will adhere to one another to resist vibration Electro-tin plated finish provides protection against corrosion RoHS compliant Color coded dual crimp identifies and matches cable size Raised lettering for easy identification of polarity, wire size and crimping codes Single Barrel Gauge Stud Size Color Code Die Code Art. # 4 Gray J-H 155764038 1-2 Pink H-H 155761238 1/0 3/8" Black E-A 155761038 2/0 Orange A-C 155762038 3/0 Purple A-B 155763038 Note: 1-2 gauge can be used for either 1 or 2 gauge Double Barrel Gauge Stud Size Color Code Die Code Art. # 1/0 Black E-A 15576138 2/0 3/8" Orange A-C 15576382 3/0 Purple A-B 15576338 POST TOP BRASS QUICK DISCONNECT TERMINAL Quickly disconnects simply by unscrewing the green knob with just a couple of turns and can easily be reconnected by simply tightening the knob Easily installs on the negative battery post Compact design fits most battery boxes easily Solid cast brass construction Description Art. # Brass Quick Disconnect Terminal 15104009 UNIVERSAL BATTERY TERMINAL 2011 WURTH USA, Inc. Revision 05/2014 Fits 6 to 2/0 gauge cable, positive or negative posts 1. Bolt locks firmly from left to right side 2. Universal-holds cable or strap 3. Removable plate for easy assembly 4. Threaded clamp avoids pull-out 5. Imbedded steel nut eliminates stripping Description Art. # Universal Battery Terminal 15104002 2 4 1 3 5 03.0296

UNIVERSAL SIDE MOUNT TERMINAL Replace corroded OE terminals Automotive and light truck applications Universal polarity Accepts 6 to 2/0 gauge cable sizes Lead, zinc plated steel fasteners Description Art. # Universal Side Mount Terminal 15104003 UNIVERSAL MARINE TERMINAL Converts conventional post type battery for marine use or any clamp type application Clamp type wing nut terminals convert standard post to marine or other special uses Positive terminal stud size is 3/8 Negative and universal terminal stud size is 5/16 Brass plated wing nut Description Art. # Universal Marine Terminal 151040010 STUD POST CONVERSIONS 1 PAIR/CD Stud to post conversion Exclusive locking design Lead posts screw on to threaded stud batteries Internal steel lock nut 1 pair per card Description Art. # Stud Post Conversions 1557514002 2011 WURTH USA, Inc. Revision 05/2014 03.0297

TWIST TIGHT BATTERY TERMINALS These terminals can be installed on 2/0 battery cable without crimping tools or solder (Not wielding cable) Terminal are cast with 131 contact copper (93-95% copper) to ensure malleability and high conductivity Exceeds SAE conductivity standard J163 Electro-tin plating for complete coverage, better appearance, high conductivity and resist corrosion Raised lettering for easy identification of polarity an wire size Extra deep chamfer helps wire installation The inside of the barrel is threaded with two distinct stages of threads. The thread grabs the bare wire, and when tightened it gives an incredible pullout strength Installation is done using only a screw driver and vice RoHS compliant Installation is completed quickly and easily Cut-away view of terminal threads Twist Tight Crimp Battery Terminal Gauge Polarity Art. # Negative 15104020 2/0 Positive 15104021 Twist Tight Stud Top Single Barrel Top Mount Terminal Gauge Stud Size Polarity Art. # 2/0 3/8" Universal 15104030 2011 WURTH USA, Inc. Revision 08/2011 Twist Tight Heavy Duty Starter Lug Gauge Stud Size Art. # 2/0 3/8" 15103820 03.0310

CRIMP BATTERY TERMINALS Made of cast copper, tin plated to resist corrosion Exceeds SAE conductivity standards, J163 and J1811 Permanent, indelible, readable gauge & polarity stamped on clamp, color coded Clamp full height of battery post for maximum electrical contact. Other connectors 25% to 40% shorter Thick wall, perfectly centered barrel, stronger crimps, longer life Includes tin plated 5/16 battery bolts and shoulder nuts Gauge Color Code Polarity Art. # 2 Green Negative 151040301 Positive 151040302 4 Grey Negative 151040401 Positive 151040402 2/0 Orange Negative 151040201 Positive 151040202 BATTERY TERMINALS Pure 131 contact copper (93-95% copper) & bright tin plating, exceeds SAE conductivity standard J163 Electro-tin plating for complete coverage, better appearance, high conductivity and corrosion resistance Connectors can be installed with adjustable crimping tools and are solderable (Art. No. 0558280 for Wurth crimping tool) RoHS compliant Color coded dual crimp identifies and matches cable size Raised lettering for easy identification of polarity, wire size and crimping codes 2015 Wurth USA, Inc. Revision 05/2015 Crimp Terminals Gauge Polarity Color Code Die Code Art. # 6 Universal Gray 15105000 Negative 15105010 J-H 4 Positive Green 15105020 Universal 15105015 1-2 Negative 15105030 Pink H-H Positive 15105040 1/0 Negative 15105050 Black E-A Positive 15105060 2/0 Negative 15105070 Orange A-C Positive 151050809 2/0* Positive Orange A-C 15105080 3/0 Negative 15105090 Purple A-B Positive 15105100 *These terminals have accessory wire capability Note: 1-2 gauge can be used for either 1 or 2 gauge Machined post area to increase surface contact and conductivity 03.0313 Battery Terminals continued on next page

BATTERY TERMINALS (CONTINUED) Flag Terminals Gauge Polarity Color Code Die Code Art. # 1/0 Negative 15106001 Black E-A 1/0* Positive 15106002 2/0 Negative 15106003 Orange A-C 2/0* Positive 15106004 3/0 Negative 15106005 Purple A-B 3/0* Positive 15106006 *These terminals have accessory wire capability Right Elbow Terminals Gauge Polarity Color Code Die Code Art. # 1/0 Negative 15107001 Black E-A Positive 15107002 2/0 Negative 15107003 Orange A-C Positive 15107004 Left Elbow Terminals Gauge Polarity Color Code Die Code Art. # 1/0 Negative 15107010 Black E-A Positive 15107011 2/0 Negative 15107012 Orange A-C Positive 15107013 HEAVY DUTY TOP POST EMERGENCY BATTERY CONNECTOR Emergency Terminal Heavy Duty, Truck Type Fits 4 Ga. to 2/0 Ga. 2011 WURTH USA, Inc. Revision 05/2014 Description Art. # H.D. Top Post Emergency Battery Connector 15104007 03.0314

LEAD FREE BATTERY TERMINAL OEM style replacement ideal for recreational, light and medium duty applications Tin plated copper alloy resists corrosion Polarity specific to exact fit on battery post Improved terminal efficiency extends life of the starter and other electronic components Gauge: 8-6-4 Applications Replace a worn or corroded terminal Top post batteries and top post battery cables (6 and 12 volt only) Description Art. # Lead Free Battery Terminal Positive 0510660000 Lead Free Battery Terminal Negative 0510660001 Valid until March 31, 2012 Use price type SP for special price. STRAIGHT POST TOP BATTERY TERMINAL Gauge Polarity Color Code Art. # 2/0 Positive Orange 15572005 3/0 Negative 15573015 Purple Positive 15573005 2011 WURTH USA, Inc. Revision 05/2014 03.0315

WURTH BATTERY SOLDER SLUGS An innovative solution for soldering cable terminals Color-coded solder pellets conform to industry standards & ensure correct product identification Pre-measured solder pellets assure the right amount of solder will be used in each connection Flux core and liquid flux prevent dirt and contaminants from hindering the soldering process Installation requires only standard shop tools which eliminates crimping BEFORE Improperly installed connectors Voltage Drop Vibration damage Corrosion on cable 1 2 3 4 5 6 7 Gauge Color Art. # 1 4 Gray 15109501 2 2 Green 15109502 3 1 Red 15109503 4 1/0 Black 15109504 5 2/0 Orange 15109505 6 3/0 Purple 15109506 7 4/0 Yellow 15109507 AFTER Easily installed termination system Soldered connections for maximum conductivity Superior tensile strength from a soldered bond Adhesive-lined tubing prevents cable corrosion Easy Installation... 1 2 3 4 2011 WURTH USA, Inc. Revision 05/2014 1. Strip the proper size cable so the exposed cable will reach the top of the battery terminal. The cable installation should fit snugly against the top. Insert proper size solder slug and apply solder flux. 2. Secure the battery terminal in a vise. Slide the proper size heat shrink tubing over the cable. Insert the exposed cable into the terminal. Heat the base of the battery terminal while applying gentle downward pressure on the cable. 3. As the solder melts, allow the cable to slide into the terminal until the installation is snug against the top of the terminal. Remove from heat. Slide the heat shrink tubing over the connection. Apply indirect heat to the tubing. 4. Allow connection to cool. You now have The Perfect Connection. 03.0316

BATTERY CABLE HEAT SHRINK TUBING Before Shrinking Adhesive lined polyolefin Heat activated adhesive liner Resistant to abrasion, salt, water and corrosion Shrink ratio 2.5:1 After Shrinking Gauge Length Color Art. # Black 17719121 4 Red 17719122 1.5" Black 17719341 2, 1, 1/0 Red 17719342 2/0, 3/0, 4/0 2" Black 1771991 Red 17719912 8 1.5" Black 177121201 Red 177121301 4/0 2" Black 177121401 Red 177121501 2011 WURTH USA, Inc. Revision 05/2014 03.0317

UNIVERSAL REPLACEMENT CABLE END Restores your original starting power Convenient for field service, work near battery not under engine Ideal for mobile repair vans, tow trucks & other service vehicles Cuts inventory by reducing stock of slow moving longer cables, permits proper fitting repair parts to be available anytime Auxiliary lead included with tie-bolt style replacement end Insulator covers coupler Copper cable Description Art. # Universal Replacement Cable End 15104004 BATTERY CABLE Our battery cable meets or exceeds SAE standards Insulated with PVC, is flame-retardant & resistant to fuel, oil, acid & salt Full gauge copper conductor For use at 60 volts or less Temperature rating of 221 F RoHS compliant Nominal low temperature rating of -58 F By using both black and red cable, your wiring system will be easier to install & troubleshoot Recommended for connecting battery to switch, starter and ground Gauge Description Color Roll Size Art. # 8 Black 10 Meters 1770908 6 Stranding 49/22.5 Red 17709061 Nominal OD.330 Black 1770906 4 Stranding 70/22.5 Red 17709041 Nominal OD.380 Black 1770904 2 Stranding 133/23 Red 17709021 25' Nominal OD.450 Black 1770902 1/0 Stranding 133/21 Red 177090101 Nominal OD.550 Black 17709010 2/0 Stranding 133/20 Red 177090201 Nominal OD.605 Black 17709020 6-2 BOOSTER CABLE WIRE 2011 WURTH USA, Inc. Revision 08/2011 100 roll All copper booster cable wire Red Description Art. # Booster Cable Wire 17707182 03.0320

TIPS FOR MATCHING CABLE When replacing cable, always install cable of equal or heavier gauge, never lighter In cold climates, use a heavier cable gauge to improve starting The size bullets below will help you determine the gauge (size) of an unmarked starter cable Measure the bare conductor only, not the insulation Actual diameters vary depending on specific wire stranding 4/0 3/0 2/0 1/0 1 2 4 6 8 Type of Equipment Typical Wire Gauge Garden Tractors, Golf Carts 8, 6, 4 Compact Cars, RV 6, 4 Standard Cars 4, 2 Full-Size Cars, Vans 2, 1 Tractor, Light Trucks, Construction 1/0 HD Tractors, Trucks, Buses, Construction 2/0, 3/0 Extra Heavy Duty 4/0 2011 WURTH USA, Inc. Revision 08/2011 03.0325

COMPACT CRIMPING TOOL HAMMER TYPE Crimping tool driven by hammer impact with locking lever for easy loading Crimps terminals 8 to 4/0 gauge Description Art. # Compact Crimping Tool Hammer Type 171599840 CABLE CUTTER Designed to cut copper cable up to 350 MCM (Metric Circular Mils) Designed for cutting copper cables (not steel) Approximately 18 Description Art. # Long Handle Cable Cutter 055814 CRIMPING TOOL This premium adjustable crimping tool will perform a void-free, three side compression crimp Simple two-finger screw die adjustment to meet all your crimping needs Fixed single nest permits void-free crimping with no cumbersome dies to interchange or lose Heavy duty steel head and rugged construction with 0.350 thick nest plates for continued use Long handle crimps perfectly on any terminal from 6 AWG to 250 MCM (Metric Circular Mils) regardless of material thickness or design Designed to provide maximum crimping compression with the least amount of force applied Approximately 25 Description Art. # Long Handle Crimping Tool 0558280 METAL TOOL BOX 2011 WURTH USA, Inc. Revision 05/2014 Description Art. # Wurth Metal Box For Crimping Toowls 05580280 03.0330

ACCESSORY BOLT Precision-machined from solid brass, includes zinc plated steel nut & washer Connects power accessories directly to battery Fits standard battery bolt, select from three input threads 3/8 side terminal accessory bolt replaces regular side terminal and 5/16-18 x 1/2 stud for accessory wires Accessory Post Adapter Description Adapter bolt, side terminal accessory post for single power lead Specifications Material Art. # 3/8" - 16 x 13/32" Accessory stud: 5/16" - 18 x 1/2" Brass; zinc plated steel fasteners 15104001 BATTERY BOLTS Includes bolt and shoulder nut Material Size Art. # Steel, zinc plated 5/16" - 18 x 1-1/4" 151040021 Steel, oil treated 1/4" - 20 x 1-5/8" 151040022 OEM SIDE MOUNT BOLTS Steel, zinc plated Description Size Art. # For single mounted leads 3/8" - 16 x 13/32" 151040031 For dual power leads 3/8" - 16 x 1" 151040032 2011 WURTH USA, Inc. Revision 08/2011 03.0335

ORSY HEAT SHRINK TUBING REEL Self-extinguishing Flame-retardant Silicone-free Good electrical, chemical and physical char acteristics Shrinks 50% Shrink tube only! No glue! Small Dispenser (Art. # 0956109) Includes: Dispenser assembly 5 reel holders - Art. # 095610903 8 small stars (holds 4 rolls) Art. # 095610901 Mounting hardware Note: Order tubing separately Combination shears sold separately Art. # 07140314 I.D. Size Art. # 1/16" 07718024 1/8" 10m 07718032 3/16" 07718048 1/4" 07718064 3/8" 07718095 1/2" 5m 07718127 3/4" 07718190 1" 07718254 HEAT SHRINK TUBING 2015 Wurth USA, Inc. Revision 06/2015 Installation: The inside diameter of the heat shrink tube should always be chosen so that the diameter is only slightly smaller after free shrinking than that of the part to be shrunk around (approx. 10-15%). When cutting the heat shrink tube to length, ensure smooth cut edges. Shrink the heat shrink tube from the center outward with a heating device. Observe optimum shrinking temperature (see table). It is important for a short shrinking time. WURTH heat shrink tubing shrink so quickly that the part to be shrunk around only heats up very slightly. With heat shrink tubes with internal adhesive, the melting inner layer can escape slightly at the ends. I.D. 4" Length Art. # 12" Length Art. # 1/16" 077100240 1/8" 077100320 17719032 3/16" 077100480 17719048 1/4" 077100640 17719064 3/8" 077100950 17719095 1/2" 077101270 17719127 3/4" 077101900 17719190 1" 077102540 03.0340 High-performance, flexible multi-purpose heat shrink tube Flame-retardant Good to very good printability Good electrical, chemical and physical properties Application range: electrical insulation, mechanical protection, marking, bundling, strain relief and as a corrosion protection Shrinking rate 2:1 Temp. Range Shrinking Temp. Change in length after shrinking Dielectric strength -67 F to +275 F +194 F to +200 F approx. ± 10% 20 kv/mm min Certifications UL 224

SPECIALTY HEAT SHRINK TUBING Specs Material Recover Temp. Chrysler MS-DB56 CAN 3686 Continuous Operating Temp. Flammability Polyolefin 250 F Non-Flame Retardant Ford ESB-M97D56A1 CP7 250 F -67 F to 230 F Shrink Ratio: 4 to 1 All weather polyolefin tubing with a very active adhesive lining. Excellent for sealing multiple wires Puncture resistant Provides superior strain relief High Adhesive Flow Heat Shrink Tubing 6 Cut Lengths Pre-Shrink ID Rec ID Wire Color Art. # Range 0.220" (7/32) 0.045" 24-12 Clear/White Dashes 17715406 0.300" (5/16") 0.060" 22-10 Clear/Red Dashes 17715416 0.350" (3/8") 0.080" 16-8 Clear/Blue Dashes 17715426 0.450" (29/64) 0.105" 14-4 Clear/Yellow Dashes 17715436 CROSSOVERS Self-Igniting Multi-Function Heat Tool Art. # 1702 614 2011 WURTH USA, Inc. Revision 05/2014 Hand Held Micro Torch Art. # 1702 616 Ultratane Butane Fuel Art. # 1892 702 03.0341

CRYSTAL CLEAR PVC HEAT SHRINK TUBING Size Art. # 3/8" 17719601 1/2" 17719602 5/8" 17719603 3/4" 17719604 No yellowing, 2:1 shrink ratio Flexible, flame retardant Resistant to grease, oils & chlorinated solvents UL subject 222VW-1; CSA OFT rated for 600V ASTM D 3150; ML-DTL-23053/2 Class 2 MULTIPLE WALL HEAT SHRINK TUBING I.D. Gauge Length Color Art. # 1/8" 20-24 Clear 1771918 3/16" 22-18 Red 17719316 1/4" 16-14 Blue 1771914 5/16" 12-10 Yellow 17719516 6" 3/8" 8-6 1771938 1/2" 4-2 1771912 Black 3/4" 2, 1, 1/0 1771934 1" 2/0, 3/0, 4/0 177191 Adhesive lined polyolefin Rated for continuous operation from -67 º F to 230 º F Radiation cross-linked with meltable adhesive liner Shrink ratio 2.5:1, sizes shown are pre-shrink sizes ML specs: MIL-1-23053/4 Class 1 SPECIALTY HEAT SHRINK W/ADHESIVE LINING Adhesive lined SXL polyolefin heat shrinkable tubing, seals out gasses and gives water proof protection 2015 Wurth USA, Inc. Revision_01/2015 Diameter Length Qty./Bag Art. # 3/16" 4" 6 17730276 1/4" 4" 4 17730277 3/8" 4" 3 17730278 1/2" 4" 2 17730279 03.0345

SOLDERLESS WIRE TERMINALS THIN WALL HEAT SHRINK TUBING Use with Pre-Shrink I.D. Wire Size 22-18 Ga..125" Post-Shrink O.D. Length Color Art. # 177182218.062" 16-14 Ga..250" Black 177181614 6" 177181210 12-10 Ga..375".187" Yellow 177171210 THIN WALL HEAT SHRINK TUBING Gauge Length Max. Wall Art # Thickness 16-14 Ga. 6".024" 177101614 HEAVY WALL HEAT SHRINK TUBING Full range of sizes for all battery cables Internally applied sealant protects against moisture Rated 600V, 194 F Min. Recovered I.D. Max. Recovered I.D. Length Connector Cable Size Color Art. #.300".100" 6" 16-12 AWG Black 177116129.400".150" 6" 12-6 AWG Black 17711669.750".220" 8" 6-1 AWG Black 1771619.750".220" 8" 6-1 AWG Red 177161 1.100".375" 9" 4-3/0 AWG Black 17714309 1.100".375" 9" 4-3/0 AWG Red 1771430 2011 WURTH USA, Inc. Revision 08/2011 03.0350

SPLIT WIRE LOOM Black polyethylene corrugated loom is durable and split for easy installation Shields wire, cable & hose from heat, shorts & corrosion Convoluted design stays flexible at all temperatures for easy routing Operating temperatures -30ºF to 220ºF Sold in 100 foot rolls I.D. O.D. Art # 1/4" 3/8" 177114197 3/8" 9/16" 177114198 1/2" 11/16" 177114199 5/8" 13/16" 17714201 3/4" 15/16" 177114200 1" 1.27" 177114202 Wire Management Before After WIRE LOOM CLIP Description Art # 3/16 Clamping Diameter 15021341 WIRE CONDUIT For insulating electrical leads, connectors, e.g. cable lugs or soldering points, serving as mechanical protection According to DIN 40621 Flame resistant, self-extinguishing Resistant against aging Good resistance against chemicals Temperature stability: -40 F up to approx. +194 F Material: PVC, silicone-free, textile-free Color: black 2011 WURTH USA, Inc. Revision 08/2011 I.D. (mm) Wall Thickness Art # 4 0.5 07714 6 0.6 07716 8 07718 0.7 10 077110 03.0355

PA BRAIDED CABLE SLEEVE Features Good abrasion protection Lines are easy to handle Temperature resistance -67 F to +257 F Self extinguishing according to DIN 75200/FMVSS 302 Halogen, cadmium and phosphor-free UV-resistant Art. # Application Range Qty Art. # Application Range Qty 0771500030 4-10 mm x 20 m 20 0771470020 18-26 mm x 10 m 10 0771490012 10-14 mm x 15 m 15 0771460030 26-36 mm x 10 m 10 0771480016 14-24 mm x 15 m 15 0771450040 32-44 mm x 5 m 5 0771440050 48-80 mm x 5 m 5 PET KNITTING HOSE Features Excellent protection against mechanical impacts (highly abrasion-resistant according to ISO 6722-1) Good chemical resistance Can be cut cold, no fraying Temperature resistance: -40 F to +320 F Self-extinguishing according to DIN 75200/FMVSS 302 Halogen, cadmium, and phosphor-free UV-resistant 2011 WURTH USA, Inc. Revision 09/2012 Art. # Outside Diam. Inside Diam. Application Range Qty 0771600010 11.3 mm 10.5 mm 1-10 mm x 49 ft 15 0771600020 21.4 mm 20.5 mm 10-20 mm x 32 ft 10 0771600030 31.8 mm 30.5 mm 20-30 mm x 32 ft 10 03.0356

PET CLOTH HEAT-SHRINK CABLE SLEEVE Features Shrinking ratio 2:1 Snug-fitting and flexible; provides perfect protection even with extreme bends Temperature resistance: -40 F to +302 F Good chemical resistance Halogen, cadmium, and phosphor-free UV-resistant Priced by the meter, minimum of 5 meters. Art. # Application Range Art. # Application Range 0771550012 6-12 mm x 5 m roll (16.4 ft) 0771590050 25-50 mm 13.12 ft roll 0771560025 12.5-25 mm x 5 m roll (16.4 ft) 0771610070 35-70 mm 13.12 ft roll 0771570030 15-30 mm x 5 m roll (16.4 ft) 0771640100 50-100 mm x 9.84 ft roll HIGH VOLTAGE CABLE PROTECTION KIT 1 2 In 2009, ECE Regulations ruled that all high voltage buses, hybrid and electric vehicles have to be identified with orange outer coverings. This revolutionary product is exclusive to WURTH USA! As of now, there are no orange high voltage cable protection kits available on the market! 4 3 Up to now, more than 2.5 million hybrid vehicles have been sold, and today all major car manufacturers use this revolutionary, trend-setting technology! 5 Art. # 0771700 2015 Wurth USA, Inc. Revision_01/2015 # Description Dimension Material Quantity 1 Conduit NS 12 Polyamid 6 5 lm 2 Conduit, Slitted NS 12 Polyamid 6 5 lm 3 Knitting Hose NS 20 Polyester (PET) 5 lm 4 Woven Wrap-around Sleeving Slitted NS 19 Polyester (PET) 5 lm 5 Cable Tie 200 x 2.5mm Polyamid 6.6 100 pc 03.0357

WIRING GROMMETS DOUBLE FLANGE (METRIC & US) Made of rubber and PVC, in black Resistant to corrosion, heat, aging, ozone, oil, splashes from gasoline and solvents Protects against mechanical damage Temperature range: -40 F to +248 F Silicone-free ROHS conform Tolerances acc. to ISO 3302-1 M26861110 Index Key 1. Bore Diameter 2. Groove Width 3. Overall Diameter 4. Inset Height 5. Overall Height 3 1 4 5 2 Metric 1 (mm) 2 (mm) 3 (mm) 4 (mm) 5 (mm) Art # 9 11 1 6 05616632 6 10 13 2 8 05616646 9 11 16 6 05616648 1 10 12 18 11 05616650 12 20 24 4 10 05616652 16 24 30 3 05616663 11 21 31 38 1.5 05616665 US 1 2 3 4 5 Art # 1/8" 3/8" 3/32" 5/16" 15611838 3/16" 5/16" 1/2" 1/4" 1561316516 3/8" 1/4" 7/16" 5/16" 3/8" 15611438 5/8" 3/16" 156114716 9/16" 1/16" 1561516716 3/4" 1" 5/16" 156151634 1/2" 5/8" 9/32" 15613812 1" 1-1/4" 1/4" 1561381 31/32" 3/32" 9/32" 15611234 1/2" 3/4" 1" 1/2" 1561121 1/8" 5/8" 7/8" 3/8" 15615878 1-1/8" 15/16" 1/16" 1/4" 1561341516 3/4" 1-1/4" 1-5/8" 1/4" 7/16" 156134114 2011 WURTH USA, Inc. Revision 08/2011 03.0360

WIRING GROMMETS SINGLE FLANGE Made of rubber and PVC, in black Resistant to corrosion, heat, aging, ozone, oil, splashes from gasoline and solvents Protects against mechanical damage Temperature range: -40 F to +248 F Silicone-free ROHS conform Tolerances acc. to ISO 3302-1 M2 5 3 1 4 1 (mm) 2 (mm) 3 (mm) 4 (mm) 5 (mm) Art # 2 10 14 18 10 15 05616640 Index Key 1. Bore Diameter 2. Groove Width 3. Overall Diameter 4. Inset Height 5. Overall Height BLANKING GROMMETS For sealing or closing drilled holes Silicone-free Made of rubber, in black Sealed on one side Resistant to corrosion, heat, aging, ozone, oil, splashes from gasoline and solvents Protects against mechanical damage A B C Bore (mm) Groove (mm) Material Style Art # D E 6 A 056116 8 B 156118 10 C 0561110 2 Rubber 12 D 0561112 14 E 0561114 2011 WURTH USA, Inc. Revision 08/2011 16 E 0561116 03.0365

SELF ADHESIVE MOUNTING PAD For securing cable ties to any dust and grease-free surfaces; metal, paint, plastic, wood, plaster, paper, etc. Size: 1 x 1 Polyamide 6.6 Temperature range 41 F to 122 F Description Art # Self Adhesive Mounting Pad 0502665 CABLE TIE RACK Description Art # Cable Tie Rack 050205020 CABLE TIES 2015 Wurth USA, Inc. Revision_01/2015 For fast, easy and reliable bundling of wires, cables, looms, hoses, etc. Preformed leading edge allows fast insertion into buckle Absolutely secure with long life High tensile strength achieved from one piece design Advanced pawl and teeth design Manufactured from filtered nylon reducing particle contamination Angled tail provides quicker initial insertion alignment Tail finger grips allow easier handling and tightening Rounded edges provides added safety and eliminates insulation damage Formulated molding processes 03.0370 Resistant to cold, will not crack or deteriorate Flame resistant Resistant to oil, fats, solvents and many organic substances. Caution when in contact with strong mineral acids and/or oxidizing chemicals, especially at high temperatures Material: PA 6.6 Temperature Range: -40 º to 185 º F Durability: White: Weather resistant at normal temperatures. For internal applications Black: UV resistant, due to carbon structure. The effect of UV rays is minimized

PLASTIC TONGUE CABLE TIES Plastic tongue Plastic tongue mechanism Length Width Bundle Dia. Tensile Strength Natural Art. # UV Black Art. # UV Black Packs 500 UV Black Packs 1000 4" 3/32" 1/16" - 7/8" 18# 050211 0502111 15029111 5-11/16" 9/64" 1/16" - 1-7/16" 40# 050212 0502121 7-1/2" 11/64" 1/16" - 1-7/8" 50# 050214 0502141 15029141 8" 40# 050214011 120# 050214021 11-3/16" 1/16" - 3-1/16" 50# 050215 0502151 15029151 3/16" 14-1/2" 1/16" - 4-1/8" 50# 050216 0502161 15029161 15" 5/16" 3/16" - 4-1/16" 120# 050218 0502181 25-1/4" 11/32" 3/16" - 7-3/16" 175# 0502191 36" 175# 1502200 METAL TONGUE CABLE TIES Metal tongue Metal tongue closure made from stainless steel, antimagnetic steel Extremely high retaining strength Effortless with low force required No sharp edges Stoppers prevent sideways movement With UL certification 2011 WURTH USA, Inc. Revision 05/2013 Length Width Bundle Dia. Tensile Natural Art. # Black Art. # Strength 4" 3/32" 1/16" - 5/8" 18# 0502221 7-7/16" 3/16" 1/16" - 1-3/8" 50# 14" 3/16" 050224 03.0375 0502231

SPECIAL PURPOSE CABLE TIES With fixing eyes which can be fixed directly to the chassis or bodywork after tying Material: Polyamide 6.6 Suitable for temperature range from -40 F to +185 F Free from halogen and silicone With UL certification Length Width Bundle Dia. Tensile Hole Material Art. # Strength 8" 3/16" UV Natural 05022611 7-1/4" UV Natural 05022711 1/8" - 1-13/16" 3/16" 50# 1/8" w/side eyelet 8-1/8" 1/8" - 3" Nylon 15021401 #10 15-5/8" 5/16" 3/16" - 4" 120# UV Black 05021812 RE-USABLE CABLE TIES Plastic tongue mechanism Re-usable No sharp edges Temperature range -50 to + 176 F Length Color Art. # 8" White 0502300430 Black 0502300431 11" White 0502300432 Black 0502300433 14" White 0502300434 Black 0502300435 2011 WURTH USA, Inc. Revision 08/2011 03.0380

COLD WEATHER PLASTIC CABLE TIE Material: Nylon 6/6 with an impact modifier Color: black Enhanced flexibility and strength Severe cold temperature applications Tested for application performance at -20 C / - 4 F Material rated at - 40 C / - 40 F per ISO180 ROHS compliant Does not get brittle when being applied in frigid weather Description 7 50lb Cold Weather Plastic Zip Tie 11 50lb Cold Weather Plastic Zip Tie 14 50lb Cold Weather Plastic Zip Tie 14 120lb Cold Weather Plastic Zip Tie Length (in/mm) Width (in/mm) Thickness (in/mm) Tie Tensile Bundle Diameter Qty Art. # 7.56/192.07.180/4.572.052/1.320 50 lb 1.875/47.625 100 0502301000 11.25/285.75.180/4.572.052/1.320 50 lb 3.062/77.787 100 0502301001 14.25/361.95.180/4.572.052/1.320 50 lb 4.00/101.60 100 0502301002 15.09/383.36.300/7.620.076/1.930 120 lb 4.06/103.18 100 0502301003 2011 WURTH USA, Inc. Revision 02/2012 03.0381

INDUSTRIAL BATTERIES Energizer industrial alkaline batteries are manufactured especially for the industrial market These well-known batteries are rated ZMA (Zero Mercury Added) 1 2 3 4 5 6 7 Type Volts Art. # 1 AAA 0827111 2 AA 0827112 1.5 3 C 182703 4 D 182704 5 9 Volt 9 182705 6 A23 (2--pack) 12 18279101 7 AAAA 1.5 182700 LITHIUM AND ALKALINE BATTERIES For automotive keyless entry systems Features include excellent shelf life, (lithium is 10 years), stable voltage, broad range of temperature efficiency 1 2 3 4 5 6 7 2011 WURTH USA, Inc. Revision 05/2014 Type Volts Art. # 1 ECR 1616 0827081616 2 ECR 1620 0827081620 3 ECR 2025 0827082025 4 ECR 2016 3 0827082016 5 CR1632 0827081632 6 CR 2032 1827912 7 CR 2450 0827082450 8 Button Cell 1.5 0827085351 03.0385 8

FUEL INJECTION CONNECTOR Offset left For Nissan 85-92 Offset left Description Art # Fuel Injection Connector 15567065 A/C BLOWER MOTOR RESISTOR HARNESS CONNECTOR Not supplied by OEM Fits resistor E7TZ-19A706-A 4-14 gauge 8 wire leads For Ford trucks 86 and up Description Art # A/C Blower Motor Resistor Harness Connector 155618015 BULB SOCKET FOR 1157 Replaces E2SZ-13410-A pigtail socket assembly 8 wire leads Parking and rear 1157 bulbs For Ford products Description Art # Bulb Socket for 1157 155618065 BULB SOCKET FOR 3156 2011 WURTH USA, Inc. Revision 05/2014 Replaces E2SZ-13410-A pigtail socket assembly 8 wire leads Parking and rear 1157 bulbs For Ford products Description Art # Bulb Socket for 3156 155617005 03.0400

BULB SOCKET FOR 1156 Not supplied by OEM repair harness pigtail assembly 2-18 gauge 8 GPT wire leads Back up lamps for 1156 bayonet style bulb For Ford 84 and up Description Art # Bulb Socket for 1156 155617006 BULB SOCKET FOR 1157 Not supplied by OEM Fits double filament bayonet bulbs. Stop, park and turn lamps Replaces 12003759 3-18 gauge 10 wire leads For Chrysler 88 and up, GM 77 and up, AMC 79 and up Description Art # Bulb Socket for 1157 155638001 BULB SOCKET FOR 194 Replaces 12001470, formerly 80-5241 Socket and wire assembly Side marker light right angle For Ford products 80 and up & GM products 71 and up Description Art # Bulb Socket for 194 155617013 BULB SOCKET FOR 194 & 194A 2011 WURTH USA, Inc. Revision 08/2011 Marker light pigtail socket For Chrysler products 71 and up Description Art # Bulb Socket for 194 & 194A 155647002 03.0405

BULB SOCKET FOR 9004 & 9007 3 prong headlamp pigtail assembly 3-18 gauge 10 wire leads For GM, Ford and Chrysler products Description Art # Bulb Socket for 9004 & 9007 155647003 BULB SOCKET FOR 9005 2 prong headlamp pigtail assembly, high beam Double guided groove 2-18 gauge 10 wire leads For GM products Description Art # Bulb Socket for 9005 155647004 BULB SOCKET FOR 9006 2 prong headlamp pigtail assembly, low beam Single guided groove 2-18 gauge 10 wire leads For GM products Description Art # Bulb Socket for 9006 155647005 UNIVERSAL BULB SOCKET 2011 WURTH USA, Inc. Revision 08/2011 For all cars using 3 prong sealed headlamp bulbs Also fits 2 & 3 prong flashers 3-18 gauge 8 wire leads Bulb Socket for 4002, 3, 5, 5040, 2, 5400, 2, 40, 421, 6006, 12 & 13 Description Art # Universal Bulb Socket 155648002 03.0410

BULB SOCKET FOR SEALED BEAM 3-12 lead wires attached to a molded receptacle Used for all sealed low beams Description Art # Bulb Socket for Sealed Beam 155647001 BULB SOCKET FOR 3057 Back up & marker wedge bulb Replaces 12083005 3 wire; 2-18 gauge, 1-16 gauge 8 wire leads For GM products 90 and up Description Art # Bulb Socket for 3057 155617001 TRAILER SOCKET 6 pole connector socket Terminal screws: exposed Contact pins: split Flange holes: 17/64 diameter, 2-5/16 on centers Mounting: through 1-3/8 diameter hole Description Art # Trailer Socket 15581258 2011 WURTH USA, Inc. Revision 08/2011 03.0415

DASH HEADLAMP SWITCH HARNESS CONNECTOR Not supplied by OEM Fits E7TZ-11654-C 9-8 wire leads; 3-20 gauge, 4-18 gauge, 1-16 gauge, 1-12 gauge For Ford F series products 87 and up Description Art # Dash Headlamp Switch Harness Connector 155618016 VOLTAGE REGULATOR HARNESS CONNECTOR Internal voltage regulator plug 1-14 gauge, 2-20 gauge 10 wire leads For Ford Topaz, Tempo, Sable, Taurus, Escort 86 and up Description Art # Voltage Regulator Harness Connector 155618001 ON / OFF TOGGLE SWITCH Heavy duty toggle switch Single pole, single throw Stem mounting: nickel plated brass, 15/32-32 thread Handle: chrome plated brass Housing: plastic with plated steel cap Electrical rating: 25 amps at 12 VDC, two screw terminals 2011 WURTH USA, Inc. Revision 08/2011 Description Art # On / Off Toggle Switch 15585582 03.0420

POWER BRAKE PIGTAIL Not supplied by OEM 12 wire leads Eliminates removing & replacing entire harness For Ford products 65 and up Description Art # Power Brake Pigtail 155618058 VEHICLE SPEED SCANNER HARNESS CONNECTOR Not supplied by OEM 2-18 gauge 8 GXL wireleads For Ford products 93 and up Description Art # Vehicle Speed Scanner Harness Connector 155618046 FAN SPEED SWITCH HARNESS CONNECTOR Not supplied by OEM Fits E6DZ-19986-A, E9SZ-A, F2DZ-A, F2UZ-A&B 4-8 GPT wire leads; 2-12 gauge, 1-14 gauge, 1-16 gauge For Ford Taurus & Sable 86-93, T-Bird & Cougar 89-93, E series 92 and up Description Art # Fan Speed Switch Harness Connector 155618030 2011 WURTH USA, Inc. Revision 05/2014 03.0425

SIG-STAT HEAVY DUTY RELAY W/ DIODE PROTECTION 40 Amp, 12V, 5 terminal, with diode protection Use with Art. # 155679185 Description Art # SIG-STAT H.D. Relay w/diode protection 15567190 SIG-STAT RELAY CONNECTOR FOR 190 Relay connector with 12 length of 12 gauge wiring Use with Art. # 15567190 Description Art # SIG-STAT Relay Connector for 190 155679185 2011 WURTH USA, Inc. Revision 08/2011 03.0430

BACK-UP ALARM Compact size and universal mounting bracket maximizes location options Sealed in epoxy against dust, moisture and vibration Self-grounding: no grounding wire needed for installation Steam cleanable and pressure washable Voltage spike and surge protected db(a) Art # 102 155638530 CIGARETTE LIGHTER SAFETY PLUG Used to replace unwanted cigarette lighters Prevents accidental shocks and burns Discourages smoking in the car The tight fit deters removal Description Art. # Cigarette Lighter Safety Plug 150159650 2011 WURTH USA, Inc. Revision 05/2014 03.0435

LIGHT BULB INDEX Bulb # Ref. # Bulb # Ref. # Bulb # Ref. # 24 17 1156A 7 3497 21 24a 18 1157 8 3652 24 2015 Wurth USA, Inc. Revision 05/2015 37 19 53 1 57 2 53 1 57 2 63 3 67 3 70 19 73 19 74 19 89 3 90 3 93 6 97 3 158 15 161 15 168 15 194 15 194A 16 211-2 28 212-2 28 464 15 880 38 881 39 882 36K 891 27 893 38 896 39 899 38 904 13 906 13 912 13 916 13 917 13 920 13 921 13 1003 4 1004 5 1034 8 1073 6 1076 6 1141 6 1154 8 1156 6 1157A 10 SE1274 25 1445 1 1816 22 1891 22 1893 22 1895 2 2033 36 2040 35 2057 8 2057A 10 2332-1 19A 2351MFX6 36I 2352MFX6 36F 2357 8 2357A 10 2397 8 2431MFX6 36H 2452MFX6 36E 3473MFX6 36D 2721 19 2721MF8W 36J 221MF 36B 2721MF8 36B 2721MFX 36C 2722 19 2722MFX 36G 2821 15 2825 15 26736 32 DE3021 30 DE3022 30 3057 11 3057A 12 3155 11 3156 11 3157 11 3157A 12 DE3175 31 DE3423 32 DE3425 32 3457* 11 3457A* 12 3496 20 3894 23 3898 25 3966 26 H8 (64212) 43 H11 (64211) 43 H4656 48 H5006 49 H6024 49 H6054 48 6411 33 6413 33 6418 34 6428 33 6451 34 6461 34 6475 34 64111 37 64115 37 64136 37 64150 45 64151 46 64152 45 64153 46 64173 47 64193 40 64194 40 64210 41 64211 (H11) 43 64212 (H8) 43 7225 9 7440 14 7440A 14A 7443 14 7506 6 7507 9A 7527 6 7428 6 9003 40 9004 42 9005 43 9006 44 9007 42 03.0445

INCANDESCENT LIGHT BULB REFERENCE Ref. # Bulb # Volts Amps Watts Base Type C* Duratek Art. # 1 53 14.4 0.12 1.72 Bayonet SC 1720953 2 57 14 0.24 3.36 Bayonet SC 1720957 2 1895 14 0.27 3.78 Bayonet SC 172091895 3 63 14 0.63 8.82 Bayonet SC 1720963 3 67 13.5 0.59 7.965 Bayonet SC 1720967 3 89 13 0.58 7.54 Bayonet SC 1720989 3 90 13 0.58 7.54 Bayonet DC 1720990 3 97 13.5 0.69 9.3 Bayonet SC 1720997 4 1003 12.8 0.94 12.032 Bayonet SC 172091003 4 5007 12 0.42 5 Bayonet SC 172095007 4 5008 12 0.83 10 Bayonet SC 172095008 5 1004 12.8 1.0 12.8 Bayonet DC 172091004 6 93 12.8 1.04 13.312 Bayonet SC 6 1073 12.8 1.8 23.04 Bayonet SC 6 1076 12.8 1.80 23.04 Bayonet DC 6 1141 12.8 1.44 18.432 Bayonet SC 172091141 6 1156 12.8 2.10 26.88 Bayonet SC 172091156 6 1156 12.8 2.10 26.88 Bayonet SC 6 7506 12 1.75 21 Bayonet SC 172097506 6 7527 12 1.50 18 Bayonet SC TABLE COLUMNS CONTINUE ON NEXT PAGE 6 7528 12/12 0.42 21/5 Bayonet DC 172097528 7 1156A 12.8 2.10 26.88 Bayonet SC 1720911561 8 1034 12.8/14.0 1.80/0.59 23/8.59 Bayonet DC 8 1154 6.4/7.0 2.63/0.75 16.57/5.25 Bayonet DC 8 1157 12.8/14.0 2.1/0.59 26.88/8.26 Bayonet DC 172091157 8 1157 12.8/14.0 2.1/0.59 26.88/8.26 Bayonet DC 2015 Wurth USA, Inc. Revision 05/2015 8 2057 12.8/14.0 2.1/0.48 26.88/6.72 Bayonet DC 172092057 8 2357 12.8/14.0 2.2/0.59 28.16/8.26 Bayonet DC 172092357 9 7225 13.5 1.852/0.37 21/4 Bayonet DC 172097225 9a 7507 12 1.75 21 Bayonet SC *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0446

Base Mat'l Osram Art. # Base Mat'l Firstec Art. # Base Mat'l Application Remarks NI 1720053 BR Instrument panel, Indicator NI 1720057 BR Instrument panel, Indicator, Clearance NI 172001895 BR Instrument panel, Indicator, Clearance NI Indicator NI 1720067 BR Parking, Side marker, Dome, LP NI 1720089 BR Parking, Side marker, Dome, LP NI 1720090 BR Indicator NI 1720097 BR Parking, Side marker, Dome, LP NI 172001003 BR Trunk, Under hood, Courtesy, Dome TABLE COLUMNS CONTINUED FROM PREVIOUS PAGE NI 07201401 NI Side marker, Tail, License plate NI 07201411 NI Side marker, Tail, License plate NI 172001004 BR Dome 0720093 BR Instrument 172001073 BR Backup, Turn, Stop 172001076 BR Instrument NI 172001141 BR Turn, Cornering, Backup, High Mount, Stop NI 172001156 BR Backup, Turn, Stop 07201156 NI Backup, Turn, Stop NI 07201321 NI European, Stop, Turn, Indicator 07201311 NI NI 17207528 NI 07201341 NI European, Stop, Turn, Indicator NI 1720011561 BR Amber coated glass 172001034 BR Turn, Stop, Tail, Parking 172001154 BR NI 1720011572 NI Turn, Stop, Tail, Park, Backup 172001157 BR Turn, Stop, Tail, Park, Backup 2015 Wurth USA, Inc. Revision 05/2015 NI 172002057 BR Turn, Stop, Tail, Park, Side, Backup NI 172002357 BR Parking, Stop, Tail NI 17207225 NI European, Stop, Turn, Indicator 172007507 NI European, Amber, Stop, Turn *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0447

INCANDESCENT LIGHT BULB REFERENCE (CONTINUED) Ref. # Bulb # Volts Amps Watts Base Type C* Duratek Art. # 10 1157A 12.8/14.0 2.1/0.59 26.88/8.26 Bayonet DC 1720911571 10 2057A 12.8/14.0 2.1/0.48 26.88/6.72 Bayonet DC 1720920571 10 2357A 12.8/14.0 2.23/0.59 28.16/8.26 Bayonet DC 1720923571 11 3057 12.8/14.0 2.1/0.48 26.88/6.72 Wedge DC 172093057 11 3155 12.8 1.60 20.48 Wedge SC 11 3156 12.8 2.10 26.88 Wedge SC 172093156 11 3157 12.8/14.0 2.1/0.59 26.88/8.26 Wedge DC 172093157 11 3457* 12.8/14.0 2.2/0.59 28.16/8.26 Wedge DC 11 4157LL 12.8/14 28.8/14.0 28.54/8.26 Wedge DC 12 3057A 12.8/14.0 2.1/0.48 26.88/8.26 Wedge DC 1720930571 12 3157A 12.8/14.0 2.1/0.59 268.88/8.26 Wedge DC 1720931571 12 3457A* 12.8/14.0 2.23/0.59 N/A Wedge DC 13 904 13.5 0.69 9.315 Wedge SC 13 906 13 9.32 0.69 Wedge SC 17209906 13 912 12.8 1.00 12.8 Wedge SC 17209912 13 916 13.5 0.54 7.29 Wedge SC 17209916 13a 916A 13.5 0.54 7.29 Wedge SC 13 917 12.8 1.20 14.4 Wedge SC 13 920 12.8 1.20 15.36 Wedge SC TABLE COLUMNS CONTINUE ON NEXT PAGE 13 921 12.8 1.40 17.92 Wedge SC 17209921 13 922 12.8 0.98 12.544 Wedge SC 17209922 14 7443 13.5/13.5 1.8/0.44 44.0/35 Wedge DC 172097443 15 158 14 0.24 3.36 Wedge SC 15 161 14 0.35 4.9 Wedge SC 15 168 14 0.35 4.9 Wedge SC 17209168 15 194 14 0.27 3.78 Wedge SC 17209194 2015 Wurth USA, Inc. Revision 05/2015 15 2821 12 0.25 3 Wedge SC 172092821 15 2825 12 0.40 4.8 Wedge SC 172092825 *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0448

Base Mat'l Osram Art. # Base Mat'l Firstec Art. # Base Mat'l Application Remarks NI 1720011571 BR Turn, Park, Side marker, Amber coated NI 1720020571 BR Turn, Park, Side, Amber coated NI 1720023571 BR Amber coated glass WG 172003057 WG Turn, Stop, Tail, Park 172003155 WG High mount, Stop WG 172003156 WG Turn, Stop, Tail, Park WG 172003157 WG Turn, Stop, Tail, Park 172003457 WG Turn, Stop, Tail, Park, High heat base* TABLE COLUMNS CONTINUED FROM PREVIOUS PAGE 07214157 WG Rear/Front Turn, Tail, Brake, Park, Rear Side Marker WG 1720030571 WG Turn, Park, Amber WG 1720031571 WG Turn, Park, Amber 1720034571 WG Turn, Stop, Tail, Park, High heat base*, Amber 17200904 WG Trunk, Courtesy, Map WG 17200906 WG Map, Dome WG 17200912 WG Dome, Courtesy, Map, High mount, Stop WG WG Indicator 17200916 WG Amber Indicator 17200917 WG Trunk 17200920 WG Indicator, Trunk WG 17200921 WG Dome, Courtesy, Map, High mount, Stop WG Indicator 172007443 WG Tail light 17200158 WG Indicator, LP, Side, Clock, Radio 17200161 WG Instrument panel, Indicator WG 17200168 WG Indicator, LP, Side, Clock, Radio WG 17200194 WG Indicator, LP, Side, Clock, Radio 2015 Wurth USA, Inc. Revision 05/2015 WG 07201611 WG European, Dash bulb WG 07201621 WG European, Indicator *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0449

INCANDESCENT LIGHT BULB REFERENCE (CONTINUED) Ref. # Bulb # Volts Amps Watts Base Type C* Duratek Art. # 15 3652 13.5 0.37 5 Wedge SC 16 194A 14 0.27 3.78 Wedge SC 172091941 17 24 14 0.24 3.36 Wedge SC 1720924 18 24A 14 0.24 3.36 Wedge SC 19 37 14 0.09 1.26 Wedge SC 19 70 14 0.15 2.1 Wedge SC 19 73 14 0.08 1.12 Wedge SC 19 74 14 0.10 1.4 Wedge SC 1720974 19 2721 12 0.10 1.2 Wedge SC 19 2722 12 0.17 2.04 Wedge SC 20 3496 12/14 2.1/0.59 25.2/8.26 Bayonet DC 172093496 21 3497 12.8 2.10 26.4 Bayonet SC 172093497 22 1816 13 0.33 4.29 Bayonet SC 22 1891 14 0.24 3.36 Bayonet SC 172091891 22 1893 14 0.33 4.62 Bayonet SC 172091893 23 3893 12 0.33 4 Bayonet SC 172093893 24 3796 12 0.17 2.04 Bayonet SC 24 3894 12 0.25 3 Bayonet SC 25 3898 12 0.17 NA Bayonet SC 172093898 27 891 13 0.63 8 Pin TABLE COLUMNS CONTINUE ON NEXT PAGE 28 211-2 12.8 0.97 12.416 Double Loop DEC 172092112 28 212-2 13.5 0.74 10 Double Loop DEC 29 561 12.8 0.97 12.416 Double Loop DEC 17209561 30 DE3021 14 0.24 Not Aplicable Dbl Bayonet DEC 172093021 30 DE3022 13 0.38 Not Aplicable Dbl Bayonet DEC 172093022 31 DE3175 13 0.77 Not Aplicable Dbl Bayonet DEC 172093175 2015 Wurth USA, Inc. Revision 05/2015 32 26736 12 NA 10 Dbl Bayonet DEC 32 DE3423 13 0.39 Not Aplicable Dbl Bayonet DEC 172093423 32 DE3425 13 0.77 Not Aplicable Dbl Bayonet DEC 172093425 33 6411 12 0.83 Not Aplicable Dbl Bayonet DEC *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0450

Base Mat'l Osram Art. # Base Mat'l Firstec Art. # Base Mat'l Application Remarks 172003652 WG Parking (2 pack) WG 172001941 WG Amber coated 1720024 WG Front Side Marker 17200241 WG Amber coated 1720037 WG Courtesy, Instrument Panel 1720070 WG Courtesy, Instrument Panel 0720073 WG Courtesy, Instrument Panel WG 1720074 WG Courtesy, Instrument Panel, Glove Box 07201601 WG European, Indicator TABLE COLUMNS CONTINUED FROM PREVIOUS PAGE 07201605 WG European, Indicator NI 172003496 BR Tail, Stop (2 pack) NI 172003497 BR Turn (2 pack) 172001816 BR NI 172001891 BR Instrument, Clearance, Indicator NI 172001893 BR Fleet service instrument, Clear, Indicator, ID NI 07201501 NI European, Parking, Indicator 07201511 BR European, Parking, Indicator 07201521 BR European, Parking, Indicator NI 07201551 NI European, Parking, Indicator 17200891 Halogen High mount, Stop NI 172002112 NI Map, Dome, Courtesy, Trunk 1720021221 NI 17200561 Dome, Step, Courtesy, Map Glove Box, Trunk/Cargo, Courtesy Foreign car dome, Map, Trunk 172003175 Foreign car dome, Map, Trunk 2015 Wurth USA, Inc. Revision 05/2015 172026736 Map, Dome, Couttesy, Trunk/Cargo Map, Dome, Trunk/Cargo 07201731 Trunk/Cargo, Dome *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0451

INCANDESCENT LIGHT BULB REFERENCE (CONTINUED) Ref. # Bulb # Volts Amps Watts Base Type C* Duratek Art. # 33 6413 12 0.40 4.8 Dbl Bayonet DEC 34 6418 12 0.40 4.8 Dbl Bayonet DEC 34 6451 12 1.25 15 Dbl Bayonet DEC 34 6461 12 1.25 10 Dbl Bayonet DEC 34 6475 12 1.50 18 Dbl Bayonet DEC 35 2040 12 0.63 8 Wedge SC 36 2033 13.5 0.22 3 Socket SC 36b 2721MF 12 0.10 1.2 Socket SC 36b 2721MFX 12 Not Aplicable 1.2 Socket SC 36c 2721MFX 12 Not Aplicable 1.2 Socket SC 36e 2452MFX6 12 Not Aplicable 1.5 Socket SC 36f 2352MFX6 12 Not Aplicable 2 Socket SC 36g 2722MFX 12 Not Aplicable 2 Socket SC 36h 2431MFX6 12 Not Aplicable 1.3 Socket SC 36i 2351MFX6 12 Not Aplicable 2 Socket SC 36J 272MF8W 12 Not Aplicable 1.2 Socket SC 37 64136 12 1.75 21 Bayonet SC 37 64115 12 1.67 20 Bayonet SC 38 880 12 2.10 37 Plug P 38 893 12.8 2.93 37.5 Plug P TABLE COLUMNS CONTINUE ON NEXT PAGE 38 899 12.8 2.93 37.5 Plug P 39 881 12.8 2.10 26.9 Plug P 39 896 12.8 2.93 37.5 Plug P 40 9003 12 8.33/4.58 100/55 Plug P 172091259 40 9003 12.8 Not Aplicable 60/55 Plug P 172096413 40 9003 12 Not Aplicable 100/80 Plug P 1720964194 2015 Wurth USA, Inc. Revision 05/2015 41 64210 12.8 Not Aplicable 55 Plug P 42 9004 12.8/12.8 Not Aplicable 65/45 Plug P 172099004 42 9004 12.8/12.8 Not Aplicable 100/80 Plug P 1720990043 42 9007 12.8/12.8 5.08/4.3 65/55 Plug P 172099007 *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0452

Base Mat'l Osram Art. # Base Mat'l Firstec Art. # Base Mat'l Application Remarks 07201721 07201711 License, Dome, Courtesy, Trunk/Cargo 07201741 Dome 17206461 Dome 07201751 172002040 WG Halogen 172002033 orange Instrument panel 07201661 black BX8.4D socket 072016522 black Bx8.4D socket, BMW, Audi, MB, Porsche TABLE COLUMNS CONTINUED FROM PREVIOUS PAGE 0720165515 lt. blue Bx8.5D socket, MB, Audi, Volvo 0720165522 beige Bx8.4D socket, BMW, Audi, MB, Porsche 0720165523 lt. green Bx8.4D socket, Audi, VW, BMW 0720165526 lt. green Bx8.5D socket, MB 0720165527 olive Bx8.4D socket 0720165532 lt. blue Bx8.4D-12.5 socket, Porsche, MB 07201651 grey BMW Dash 172064136 NI Halogen Parking & Indicator, MB E Class 172064115 NI Halogen Brake light 1720880 Halogen Fog light 17200893 Halogen Fog light 17200899 Halogen, High mount, Stop 17200881 Halogen, High mount, Stop 17200896 Halogen, High mount, Stop 07201101 H-4 (64193) Halogen Off road H-4 (42268) Halogen Headlight 172064194 H-4 (64194) Halogen Off road 2015 Wurth USA, Inc. Revision 05/2015 1720064210 H7 Halogen 172009004 Halogen Headlight Halogen Off road 172009007 Halogen Headlight *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0453

INCANDESCENT LIGHT BULB REFERENCE (CONTINUED) Ref. # Bulb # Volts Amps Watts Base Type C* Duratek Art. # 43 9005 12.8 Not Aplicable 65 Plug P 172099005 43 H-8(64212) 12 2.90 35 Plug P 43 H-11(64211) 12 Not Aplicable 55 Plug P 17209115 44 9006 12.8 Not Aplicable 55 Plug P 172099006 44 9006 12 Not Aplicable 55 Plug P 45 64152 12 Not Aplicable 100 Plug P 1720964101 45 64150 12 Not Aplicable 55 Plug P 1720964150 46 64151 12 Not Aplicable 55 Base B 172096411 46 64153 12 Not Aplicable 100 Base B 1720964153 47 64173 12 4.58 55 Base B 48 H4656 12 Not Aplicable 35/35 Sealed Beam S 48 H6054 12.8 Not Aplicable 65/35 Sealed Beam S 49 9008 12.8/12.8 Not Aplicable 55/65 Plug P 172099008 50 4057K 12.8/14 2.23/0.48 Not Aplicable Wedge DC 172094057 51 5702NAK 14/14 Not Aplicable Not Aplicable Wedge DC 172095702 52 916NA 13.5 0.54 Not Aplicable Wedge SC 172099161 53 D1S Not Aplicable Not Aplicable 35 Plug P 172090601 54 9006XS 12.8 Not Aplicable 55 Plug P 1720990060 55 DE3423 12 0.39 Not Aplicable Dbl Bayonet DB 172093426 56 1866 13 Not Aplicable Not Aplicable Bayonet SC 172091866 TABLE COLUMNS CONTINUE ON NEXT PAGE 57 D4R 42 Not Aplicable 35 Plug P 172090604 58 D4S 42 Not Aplicable 35 Plug P 172090605 59 D2S Not Aplicable Not Aplicable 35 Plug P 172090606 60 D1R Not Aplicable Not Aplicable 35 Plug P 172090602 61 D2R Not Aplicable Not Aplicable 35 Plug P 172090603 62 9005XS 12.8 Not Aplicable 65 Plug P 1720990050 2015 Wurth USA, Inc. Revision 05/2015 63 9012LL 12.8 Not Aplicable 60 Plug P 172099012 64 D3R 42 Not Aplicable 35 Plug P 172096371 65 D3S 42 Not Aplicable 35 Plug P 172096372 66 37574NAK 12.8/14 Not Aplicable 2.1/0.59 Wedge DC 172093757 *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0454

Base Mat'l Osram Art. # Base Mat'l Firstec Art. # Base Mat'l Application Remarks 172009005 Halogen Headlight 172064212 H8 Halogen Headlight 172064211 H11 Halogen Headlight 172009006 Halogen Headlight 1720090069 Halogen Cool Blue (DOT approved) H1 Halogen Fog, Hi-beam 07201111 H1 Halogen Fog, Hi-beam 07201121 H3 Halogen Fog lamp 172064153 H3 Halogen Fog lamp TABLE COLUMNS CONTINUED FROM PREVIOUS PAGE 07201131 NI H2 Halogen Fog lamp 172004656 Hi/low beam (3 contacts) 172006054 Hi/low beam (3 contacts) H13/9008 RearTurn Signal, Tail, Brake, Rear Sidemarker, Backup Parking, Front Turn Signal Front Side Marker Headlamp D1S/4200K HID Headlamp 9006XS Dome, Courtesy, Map, Trunk/Cargo DE3423 1866 Headlamp D4R - Xenon HID Headlamp D4S - Xenon HID Headlamp D2S Headlamp D1R HeadlampD2R Headlamp9005XS 2015 Wurth USA, Inc. Revision 05/2015 Headlamp Halogen Long Life Headlamp HID Minature with Mask Headlamp HID Minature Parking, Front Turn Signal, Day Time Running *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 03.0455

INCANDESCENT LIGHT BULB REFERENCE (CONTINUED) Ref. # Bulb # Volts Amps Watts Base Type C* Duratek Art. # 67 7441 12.8 Not Aplicable 2.1 Wedge S 172097441 68 7444NA 13.5/13.5 Not Aplicable 1.85/.44 Wedge S 172097444 69 2827 12 0.40 4.8 Wedge S 172092827 70 7014 Not Aplicable 1.78 24 Plug P 172097014 71 2504 12 Not Aplicable 24 Plug P 172092504 72 4157K 12.8/14 2.23/.59 Not Aplicable Wedge DC 172094157 73 5202 12 2.00 24 Plug DC 172095202 TABLE CONTINUES 74 H1155 13.2 55 172091155 75 7440 13.5 1.70 21 Wedge SC 172097440 75a 7440A 13.5 1.70 21 Wedge SC *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 2015 Wurth USA, Inc. Revision 05/2015 03.0456

Base Mat'l Osram Art. # Base Mat'l Firstec Art. # Base Mat'l Application Remarks Backup Parking, Front Turn Signal Parking, Front Side Marker FROM PREVIOUS Rear Turn Signal. Front Turn Signal Front Fog Tail, Brake, Parking, Front & Rear Turn Sig., Rear Side Mkr Front Fog 1720974401 WG High mount, Stop 172007440 WG Amber *C = Contact, *DC = Dual Contact, *S = Single Contact, *WG = Wedge, * = High Heat Base, *A = Amber, *K = Krypton, *DEC = Double Ended Contact, *P = Plug type, *B = Base Type, *Sealed Beam 2015 Wurth USA, Inc. Revision 05/2015 03.0457

INCANDESCENT LIGHT BULBS 1 2 3 Available in Brass & Nickel Available in Brass & Nickel 4 5 6 Available in Brass & Nickel 7 8 9 Offset Bayonets Offset Bayonets Offset Bayonets 2015 Wurth USA, Inc. Revision 05/2015 Available in Brass & Nickel Available in Brass & Nickel 03.0460

INCANDESCENT LIGHT BULBS (CONTINUED) 9a 10 11 Offset Bayonets 12 13 13a 14 15 16 17 2015 Wurth USA, Inc. Revision 05/2015 03.0461

INCANDESCENT LIGHT BULBS (CONTINUED) 18 19 20 v21 22 23 Available in Brass & Nickel 24 25 27 2015 Wurth USA, Inc. Revision 05/2015 03.0462 Halogen Bulb

INCANDESCENT LIGHT BULBS (CONTINUED) 28 29 30 31 32 33 34 35 36 2015 Wurth USA, Inc. Revision 05/2015 Halogen Bulb 03.0463

INCANDESCENT LIGHT BULBS (CONTINUED) 36b 36c 36e 36f 36g 36h 36i 36j 37a 37 2015 Wurth USA, Inc. Revision 05/2015 03.0464 Halogen Bulb

INCANDESCENT LIGHT BULBS (CONTINUED) 38 39 40 Halogen Bulb Halogen Bulb H - 4 41 42 43 H - 7 Halogen Bulb Halogen Bulb 44 45 46 2015 Wurth USA, Inc. Revision 05/2015 Halogen Bulb H - 1 H - 3 03.0465

INCANDESCENT LIGHT BULBS (CONTINUED) 47 48 49 H - 2 50 51 52 53 54 55 2015 Wurth USA, Inc. Revision 05/2015 03.0466

INCANDESCENT LIGHT BULBS (CONTINUED) 56 57 58 59 60 61 62 63 64 2015 Wurth USA, Inc. Revision 05/2015 03.0467

INCANDESCENT LIGHT BULBS (CONTINUED) 65 66 67 68 69 70 71 72 73 2015 Wurth USA, Inc. Revision 05/2015 03.0468

INCANDESCENT LIGHT BULBS (CONTINUED) 74 75 75a 2015 Wurth USA, Inc. Revision 05/2015 03.0469

WURTH USA Inc. 93 Grant Street Ramsey, NJ 07446 1-800 WURTH USA (987-8487) www.wurthusa.com WURTH USA Inc. 2011 Printed in New Jersey The information enclosed is privileged and confidential property of WURTH USA, Inc. Any dissemination, distribution or copying of this communication is strictly prohibited.