RUBINETTI GLLEGGINTE e SERE LOT VLVES & LOT BLLS
2 Pressioni massime raccomandate Recommended maximum pressures 103 104-104- 104-110 110-110- 215 215-215 PNE DI OTTONE (parti pressofuse) - BRSS BREDS (die-cast parts) Denominazione commerciale -Commercial name: DELT C (OT58) Composizione chimica - Chemical composition: Cu 58,5-59,5 Densità Density Pb 1,8-2,5 Conduttività elettrica Electrical conductivity Ni (max) 0,6 e (max) 1,0 Ritiro lineare Linear withdrawal Mn (max) 0,3 Punto di fusione Melting point Rubinetto a galleggiante loat valve 320 320-320- 320-320-1/4 320-320-2 274 274-274- 274-274- 274-1/4 274-274-2 274-2 274-3 274-4 104 104-104- 104-104-1/4 104-104-2 106 104-104- 104- Sn (max) 1,2 Temperatura colata Strain temperature Si (max) 0,05 Sfera loat Ball 295-120 295-120 295-150 295-180 295-220 295-220 291-90 291-90 295-120 295-150 295-180 295-220 295-220 295-300 295-300 295-300 296-4 296-4 296-5 296-8 296-8 296-8 296-4 296-4 296-5 295-120 295-120 295-150 291-90 291-90 291-90 291-90 Carico rottura a trazione Loaded breach to traction l 0,4-0,8 s -- llungamento Pressione massima Max pressure atm 8 8 7 4 4 3 10 10 8 4 4 4 4 Zn -- Durezza Brinnel Brinnel Hardness 8.45 Kg/dm 3 21 1.9-2 % 850 C 980-1080 C 390-440 N/mm 2 22-25% 90-100 HB 5 3 2 2 1 1 1 1 1 1 10 10 8 4 4 3 10 10 8 BRR TRILT (lavorazioni di torneria) - DRWN BR (automatic lather-worked parts) Norma - Norm: UNI EN 12164 CW614N Lega - lloy: CW 614 N (OT58) Composizione chimica - Chemical composition: Cu Pb Ni (max) e (max) Mn (max) Sn (max) Si (max) ltro Others (max) 57-59 2,3-3,2 0,3 0,3 0,3 0,3 0,05 0,2 BRR ESTRUS (stampaggio a caldo) - EXTRUDED BR (hot-pressed parts) Norma - Norm: UNI EN 12165 CW617N Lega - lloy: CW 617 N (OT58) Composizione chimica - Chemical composition: Cu Pb Ni (max) e (max) Mn (max) Sn (max) Si (max) ltro Others (max) 57-59 1,6-2,5 0,3 0,3 0,3 0,3 0,05 0,2 Zn Resto Rests Zn Resto Rests GURNIZIONI - RUBBERS Materiale - Material: EPDM 65 SH VLVOLINI E TENUTE IN PLSTIC - PLSTIC PISTONS ND SET; Materiale - Material: PP V10 Polipropilene caricato fibra vetro 10% - Polypropylene 10% glass filled SERE IN PLSTIC - PLSTIC LOT BLLS Materiale - Material: SOLVY ELTEX B 5520 Polietilene alta densità - High density polyethylene
Rubinetti a galleggiante loat valves Robinets lotteurs Pagina Page Page PG 3 tipo Sicilia Sicily model 4 per uso idraulico e industriale for hydraulic and industrial uses 6 modello Italiano Italian model 5 7 modello 5 copiglie 5 pins model 5 11-12 per cassetta di scarico for closet tank in the wall 8-10 per ceramiche con entrata dal fondo for ceramics with bottom inlet 13-14 modelli rancesi rancaises modèles 16 sfere loat balls 17-19 modelli Inglesi - British standard English models - British standard 20-27
4 rt. 103 103 sta regolabile piatta in OT 58 lat and adjustable arm, 4 7 rt. 106 rt 295 106 sta fissa tonda con filetto 5/16 Round and fixed arm with 5/16 thread 3,77 3,95 6,46 Rubinetti a galleggiante BS Tipo Sicilia con tappo in ottone stampati in OT 58. - Sede di tenuta in ottone BS English Model Tipo Sicilia with brass plug hot pressed in brass. Brass seat rt 296 106 N Corpo nichelato sta fissa tonda con filetto 5/16 Nichel plated body Roun and fixed arm with 5/16 thread 3,93 4,13 6,66 103 S sta corta regolabile piatta in OT 58 Per abbeveratoio lat, short and adjustable arm or drinking trough 5,38 5,58 9,44 rt 298 103 P Senza asta, da abbinare alla sfera rt. 299 Without arm, to use with ball rt. 299 3,56 3,72 6,92 rt 299 rt. 910 910 2 3 Per rt. 103-106 da: or rt. 103-106 size: e 0,26 0,31 Tubo silenziatore in PVC adatto ad rt. 103 e 106. PVC silencer pipe for rt. 103 and 106 Per rt. 103-106 da: or rt. 103-106 size e 0,26 0,31
5 rt. 210 CTIS 210 sta fissa ixed arm 3,83 4,11 Rubinetti a galleggiante silenziosi, nichelati. - Sede di tenuta inox. - Tubetto silenziatore. 210 B sta regolabile djustable arm 4,03 4,31 Silent and nickeled float valves. Stainless steel seat and silencer pipe. rt 291 rt. 278 278 1 Sede di tenuta in ottone sta tonda con filetto per sfera 1/4 3,22 3,34 Brass seat Round arm with Sede di tenuta inox sta tonda con filetto per sfera 1/4 3,33 3,44 278 B1 Stainless steel seat Round arm with Rubinetti a galleggiante, 5 copiglie stampati OT 58. 5 pins float valves, hot pressed in brass. 278 2 Sede di tenuta in ottone sta piatta per sfere con scorrevole Brass seat lat arm 5,58 7,69 Tipo Sede di tenuta in ottone. Brass seat. Tipo B Sede di tenuta inox. Stainless steel seat. 278 B2 Sede di tenuta inox sta piatta per sfere con scorrevole Stainless steel seat lat arm 5,74 7,86 278 4 Sede di tenuta in ottone sta tonda lunga 250 mm. con filetto per sfera 1/4 3,36 3,47 Brass seat 250 mm. round arm with rt 291 rt 293 rt 295 Sede di tenuta inox sta tonda lunga 250 mm. con filetto per sfera 1/4 3,47 3,58 278 B4 Stainless steel seat 250 mm. round arm with
6 rt. 320 320 Sede di tenuta in ottone sta piatta Brass seat lat arm 1/4 2 5,51 5,57 7,58 18,15 23,55 31,09 Rubinetti a galleggiante per usi industriali-idraulici, stampati in OT 58. loat valves for industrial and hydraulic uses, hot-pressed in brass. Tipo 320 B Sede di tenuta anticorrosiva sta piatta nticorrosion seat lat arm 1/4 2 6,76 6,82 8,26 24,66 32,84 43,74 Sede di tenuta in ottone. Brass seat. Tipo B Sede di tenuta acciaio inox. Stainless steel seat. rt 295 rt 297 rt 300 rt. 910 B Tubo silenziatore in PVC adatto ad rt. 320. PVC silencer pipe for rt. 320. 910 B 2 3 4 5 6 Per rt. 320 da: or rt. 320 size: e 1/4 2 0,77 0,98 1,86 2,48 2,69
7 rt. 110 110 sta fissa iletto per sfera 1/4 ixed arm 3,56 3,87 Rubinetti a galleggiante silenziosi, nichelati. - Sede di tenuta inox. - Tubetto silenziatore. 110 B sta regolabile iletto per sfera 1/4 djustable arm 3,85 4,16 Silent and nickeled float valves. Stainless steel seat and silencer pipe. 110 C sta regolabile tonda per cassette a zaino iletto per sfera 1/4 4,03 4,35 Round and adjustable arm for rucksack tanks 110 D sta fissa tonda lunga 250 mm. iletto per sfera 1/4 3,58 3,90 250 mm. round and fixed arm 110 H sta regolabile piatta per cassette a zaino lat and adjustable arm for rucksack tanks 4,10 4,41 rt 291 rt 302
8 rt. 215 215 sta fissa ixed arm 2,99 3,35 215 N sta fissa Nichelato ixed arm Nickel plated 3,10 3,46 Rubinetti a galleggiante in barra silenziosi. - Sede di tenuta inox. - Tubetto silenziatore. 215 B sta regolabile djustable arm 3,35 3,72 Silent float valves made in brass bar. Stainless steel seat and silencer pipe. 215 BN sta regolabile Nichelato djustable arm Nickel plated 3,45 3,81 215 C sta regolabile tonda per cassette a zaino Round and adjustable arm for rucksack tanks 3,54 3,90 215 D sta fissa tonda lunga 250 mm. 250 mm. round and fixed arm 3,08 3,48 215 H sta regolabile piatta sagomata per cassette a zaino 3,72 4,08 lat and adjustable arm for rucksack tanks rt 291 rt 295 ø 90 rt 302
9 rt. 215 215 E sta fissa tonda lunga mm. 315 senza filetto 3,15 3,51 315 mm. round and fixed arm without thread 215 sta fissa tonda sagomata per cassette a zaino lunga mm. 280 3,28 3,64 Round and fixed arm for rucksack tanks lenght: 280 mm. 215 G sta regolabile piatta diritta lat, straight and adjustable arm 3,51 3,87 rt 291 rt 295 ø 90 rt 302 rt. 216 216 D sta fissa 250 mm. iletto 1/4 Gambo lungo 35 mm. 3,05 3,51 Tige fixe, longue 250 mm. ilet 1/4 Mamelon longe 35 mm. Rubinetti a galleggiante in barra silenziosi. - Sede di tenuta inox. Robinet flotteur silencieux - Siège inox 216 G sta regolabile, piatta, diritta Gambo lungo 35 mm. Tige réglable, plat, droit Mamelon longe 35 mm. 3,51 3,87 rt 291 rt 302 rt 295 ø 90
10 rt. 220 Pucci 220 sta tonda regolabile in OT 63, sagomata per cassette a incasso Round and adjustable arm for wall tanks 3,46 Rubinetti a galleggiante silenziosi per cassette ad incasso. - Sede inox. Silent float valves for tanks in the wall. Stainless steel seat. 220 B sta piatta regolabile, sagomata per cassette a incasso lat and adjustable arm for wall tanks 4,60 rt 291 rt. 224 Dora 224 sta tonda regolabile sagomata Regolatore di flusso Sede inox Round, adjustable and moulded arm lux adjustment valve Stainless steel seat emmina 5,78 Rubinetti a galleggiante per cassette ad incasso. loat valves for tanks in the wall. 224 B sta piatta regolabile sagomata Regolatore di flusso Sede inox lat, adjustable and moulded arm lux adjustment valve Stainless steel seat emmina 6,15 rt 291
11 rt. 274 274 1 Sede di tenuta in ottone sta tonda OT 63 con filetto per sfera 1/4 2,17 2,40 Brass seat Round arm with Sede di tenuta inox sta tonda OT 63 con filetto per sfera 1/4 2,28 2,50 274 B1 Stainless steel seat Round arm with Rubinetti a galleggiante 5 copiglie, pressofusi. 5 pins float valves die cast in brass. 274 2 Sede di tenuta in ottone sta piatta per sfere con scorrevole Brass seat lat arm 4,23 6,09 Tipo Sede di tenuta in ottone. Brass seat. Sede di tenuta inox sta piatta per sfere con scorrevole 4,39 6,25 274 B2 Stainless steel seat lat arm 274 3 Sede di tenuta in ottone sta piatta per sfere con scorrevole Brass seat lat arm 1/4 2 16,70 22,62 30,42 Tipo B Sede di tenuta acciaio inox. Stainless steel seat. Sede di tenuta in acciaio inox sta piatta per sfere con scorrevole 1/4 2 23,03 28,92 37,08 274 B3 Stainless steel seat lat arm 274 3 Sede di tenuta in ottone sta piatta per sfere con scorrevole Codolo con filetto gas o NPT americano 2 3 4 96,06 119,30 163,20 rt 291 rt 293 Brass seat lat arm Inlet shank with english or american thread rt 295 rt 297 rt 300 in Bronzo
12 rt. 274 274 4 Sede di tenuta in ottone sta tonda OT 63 lunga mm. 250 con filetto per sfera 1/4 Brass seat 250 mm. round arm with 2,31 2,53 274 B4 Sede di tenuta inox sta tonda OT 63 lunga mm. 250 con filetto per sfera 1/4 Stainless steel seat 250 mm. round arm with 2,42 2,63 rt 291 rt 293 274 6 Sede di tenuta in ottone sta piatta 2x10 OT 58 Brass seat 2x10 mm. flat arm 2,21 2,43 rt 295 rt 297 rt 300 274 B6 Sede di tenuta inox sta piatta 2x10 OT 58 Stainless steel seat 2x10 mm. flat arm 2,37 2,53 rt. 118 118 Maniglia in plastica Raccordo per attacco da 3,31 3,54 Plastic handle Pipe-fitting: Rubinetti a squadra per cassetta. - Cromati. ngle cock for tanks. Chrome-plated. 118 B Maniglia in ottone Raccordo per attacco da 4,00 4,25 Brass handle Pipe-fitting: 118 C Maniglia in plastica con tubetto prolunga regolabile 4,40 Plastic handle Pipe-fitting:
13 rt. 315 SIPHONIC 315 1 Siphonic standard sta con filetto 1/4 Siphonic standard rm with 5,64 5,71 Rubinetti Siphonic silenziosi. - Entrata dal fondo. - Sede di tenuta inox. 280 mm. Silent Siphonic valves. Bottom inlet. Stainless steel seat 315 2 Siphonic standard sta lunga senza filetto Siphonic standard Long arm without thread 5,71 5,78 80 mm. 280 mm. 315 3 Siphonic standard sta lunga 250 mm. con filetto 1/4 Siphonic standard 250 mm. fixed arm 1/4 thread 5,71 5,78 315 R Siphonic a gambo lungo 80 mm. per retusa 7,25 280 mm. Siphonic with long tail for retusa 315 B1 Siphonic in plastica, altezza regolabile, testa e codolo in ottone 4,44 4,60 200/300 mm. Siphonic in plastic, adjiustable in height, Brass head and tail 315 V1 Siphonic con sfiato con dado e ogiva sta con filetto 1/4 5/8 6,64 7,08 230 mm. Siphonic with leak Nut and ogive included rm with rt 291 rt 302 rt 295 ø 90
14 rt. 317-318 317 Colonna dritta in rame con dado per aggancio rubinetto a galleggiante da CODOLO CODOLO 3,51 3,57 Colonne per entrata dal fondo. Pipes for bottom inlet. 290 mm. Straight copper pipe with nut for clouping up float valves 317 R Colonna dritta in rame ad altezza regolabile Straight copper pipe, adjustable in height CODOLO CODOLO 4,03 4,13 317 B Colonna sagomata in rame con dado per aggancio rubinetto a galleggiante da CODOLO CODOLO 3,35 3,37 Shaped copper pipe with nut for clouping up float valves 230 mm. Colonna sagomata in rame ad altezza regolabile CODOLO CODOLO 3,87 3,98 317 BR Straight copper pipe, adjustable in height 317 C Colonna dritta in rame con rubinetto regolazione flusso e dado per aggancio rubinetto a galleggiante da CODOLO CODOLO 4,15 4,21 290 mm. Straight copper pipe with flux adjustment valve and with nut for clouping up float valves 318 CR Colonna dritta in rame ad altezza regolabile Straight copper pipe, adjustable in height CODOLO CODOLO 4,39 4,49 318 Colonna in plastica con sede per aggancio rubinetto a galleggiante da CODOLO 2,04 Plastic pipe x 200/300 mm. 318 R Colonna in plastica ad altezza regolabile Plastic pipe, adjustable in height CODOLO CODOLO 1,70 1,76
15 rt. 122 122 Con dado e codolo diritto With nut and straight tail 1/4 2,56 3,68 6,12 9,84 Raccordo diritto in ottone per cassoni. Brass straight pipe-fitting for tanks. 122 C Con dado e curva With nut and curved tail 3,37 3,38 6,46 rt. 123 Raccordo piano in ottone per cassoni. Brass even pipe-fitting for tanks. 123 1/4 2 3 1,47 1,96 2,70 4,63 5,93 7,08 23,24 123 B Con tappo With screw plug 1/4 1,80 2,46 3,39 5,68
16 rt. 401-402 401 Rubinetto in plastica C/dado in plastica Tappo in plastica sta in ottone:, B o C B 1,40 1,43 1,49 Rubinetto a galleggiante silenzioso. : : Robinet flotteur silencieux. Robinet en plastique Contre-ecrou en plastique Bouchon en plastique Tige en laiton:, B, ou C B C 1,40 1,43 1,49 sta 200 mm. - filetto 1/4 Tige longue 200 mm. - filet 1/4 B C sta 250 mm. - filetto 1/4 Tige longue 250 mm. - filet 1/4 sta 300 mm. senza filetto Tige longue 300 mm. sans filet pour boule passant (rt. 302) 402 Rubinetto in ottone C/dado in ottone Tappo in plastica sta in ottone:, B o C Robinet en laiton Contre-ecrou en laiton Bouchon en plastique Tige en laiton:, B, ou C B C 2,71 2,74 2,80 rt. 420 420 ttacco Mx Raccordement Mx EN LITON 2,58 Rubinetto d arresto a squadra in ottone. Robinet d arrêt a équerre en laiton. 420 N ttacco Mx Raccordement Mx NICKELISE 2,66 rt. 216 216 D sta fissa 250 mm. iletto 1/4 Gambo lungo 35 mm. 3,05 3,51 Tige fixe, longue 250 mm. ilet 1/4 Mamelon longe 35 mm. Rubinetti a galleggiante in barra silenziosi. - Sede di tenuta inox. Robinet flotteur silencieux - Siège inox 216 G sta regolabile, piatta, diritta Gambo lungo 35 mm. Tige réglable, plat, droit Mamelon longe 35 mm. 3,51 3,87 rt 291 rt 302 rt 295 ø 90
17 rt. 291 291 iletto da 1/4 ø 90 0,41 Sfera in plastica piatta. lat plastic float ball. rt. 293 293 iletto da 1/4 ø 90 ø 120 ø 150 0,46 1,09 1,47 Sfera in plastica tonda. Plastic float ball. rt. 295 Sfera in plastica tonda. Plastic float ball. 295 Con reggisfera scorrevole Sliding ball-holder ø 90 ø 120 ø 150 ø 180 ø 220 ø 300 0,56 1,13 1,48 2,58 4,83 11,88 rt. 296 296 iletto 5/16 5/16 thread ø 3 (85) ø 4 (115) ø 5 (125) ø 6 (150) 0,62 1,14 1,40 1,79 Sfera in plastica tonda. Plastic float ball. iletto 7/16 ø 8 (200) 5,27 7/16 thread rt. 298 298 Per asta piatta (12x3) or flat arm (12x3) only ø 120 0,76 rt. 299 Sfera in plastica piatta o cilindrica. lat or cylindrical plastic float ball. 299 Per ingomro ridotto or small tank ø 90 L=100 mm. 1,08
18 rt. 302 Sfera in plastica. 302 R Con reggisfera passante per asta non filettata Passing-throught ball-holder or not-threaded arm only 0,90 Plastic float ball. 302 C Con reggisfera passante per asta non filettata Passing-throught ball-holder or not-threaded arm only 0,46 rt. 120 Reggisfera. 120 Reggisfera scorrevole per aste piatte 3x15 mm./4x18 mm. Sliding ball-holder for flat arm 3x15 mm./4x18 mm. 4 x 18 0,40 Ball-holder. 120 B Reggisfera scorrevole per aste piatte 6x20 mm. Sliding ball-holder for flat arm 6x20 mm. 6 x 20 0,82 120 C Reggisfera a nottolino Ball-holder iletto 1/4W 1/4W thread 1/4 W 0,21 iletto 5/16W 5/16W thread 5/16 W 0,24 iletto 7/16W 7/16W thread 7/16 W 0,46 Membrane in gomma B0 B2 B3 B4 B5 B6 B7 B8 B0 B1 B2 B3 B4 B5 B6 B7 B8 Membrana per rt. 215 e 315 Ventosa per rt. 110 Ventosa per rt. 210 Catis Disco in gomma per e Disco in gomma per Disco in gomma per Disco in gomma per 1/4 Disco in gomma per Disco in gomma per 2
19 rt. 297 297 Nottolino filetto 1/4 Ball-holder ø 85 ø 90 ø 100 3,10 3,20 3,62 Sfera in rame tonda. Copper float ball. Con reggisfera scorrevole saldato Welded sliding ball-holder ø 120 ø 150 ø 180 ø 200 ø 220 ø 250 ø 280 ø 300 6,68 8,88 12,34 15,80 22,35 39,37 52,91 65,48 rt. 297B Sfera in rame tonda divisa in 2 metà. Copper float ball in two halves. 297 B ø 85 ø 90 ø 100 ø 120 ø 150 ø 180 ø 200 ø 220 ø 250 ø 280 ø 300 1,75 1,99 2,61 3,77 5,73 8,50 12,14 16,93 27,81 38,71 44,51 rt. 300 Sfera in rame piatta. lat copper float ball. 300 Con reggisfera scorrevole saldato Welded sliding ball-holder ø 120 ø 150 ø 180 ø 200 ø 220 ø 250 ø 300 9,04 10,95 15,17 17,66 21,24 32,34 47,59 rt. 301 301 Con nottolino filetto 5/16 Ball-holder 5/16 thread ø 3 (85) ø 4 (120) ø 6 (150) 9,14 14,34 16,88 Sfera in rame tonda. Copper float ball. Con nottolino filetto 7/16 Ball-holder 7/16 thread ø 8 (200) 27,18 rt. 301B 301 B ø 3 (85) ø 4 (120) ø 6 (150) ø 8 (200) 5,91 10,52 12,73 19,55 Sfera in rame tonda divisa in 2 metà. Copper float ball in two halves.
20 rt. 104 104 Brass backnut Plastic plug 10 arm with 5/16 thread 3,24 3,60 3,79 8,98 LP loat valves hot pressed in brass. 104 Brass backnut 17 arm with 7/16 thread 1/4 2 19,62 22,31 26,07 rt 296 rt 301 rt. 310 310 Brass backnut 10 arm ø 6 mm. 2,72 2,78 3,29 5,27 BS float valves hot pressed in brass Light Series 310 E Brass backnut 10 arm ø 7,5 mm. 5/16 thread 3,19 3,25 3,78 5,74 rt 296 rt 301 rt 291 rt 293
21 rt. 102 102 LP low pressure Brass seat Brass backnut 10 arm 5/16 thread 3,20 3,56 3,74 5,73 BS Moh float valves hot pressed in brass Heavy Series 102 C Brass backnut 10 arm 3,07 3,46 3,65 5,63 rt 296 rt 301 102 D HP high pressure brass seat Brass backnut 10 arm 5/16 thread 3,20 3,59 3,77 5,73 rt 291 rt 293 ittings for art. 102 and art. 310 866 330 Plug for art. 310:, and art. 102: Plug for art. 310: and art. 102:, 0,05 0,06 331 Plug for art. 310: and art. 102: 0,07 Plastic plugs
22 Recommended combinations rt. -BS1212/1 1 BS1212/1- HP plastic seat 1/8 Plastic piston 10 arm 4,52 BS1212/1 loat valve. High pressure (HP) or low pressure (LP). ll combinations with below components: B1 BS1212/1- HP plastic seat 1/8 10 arm 4,77 rm 10 rm 8 HP plastic seat 1/8 HP brass seat 1/8 rm 6 LP plastic seat 1/4 E1 BS1212/1- HP plastic seat 1/8 Plastic piston 8 arm 4,53 1 2 3 3 tail 1 BS1212/1- HP plastic seat 1/8 8 arm 4,80 Plastic piston Brass piston Brass nuts D3 BS1212/1- HP brass seat 1/8 Brass nuts 10 arm 5,58
23 Recommended combinations I1 BS1212/1- HP plastic seat 1/8 Plastic piston 3 tail 6 arm 4,58 L1 BS1212/1- HP plastic seat 1/8 3 tail 6 arm 4,85 rt 296 ø 4 rt 301 ø 4 rt. 151-BS1212/1 LP 151 B BS1212/1- LP plastic seat 10 arm 6,77 BS1212/1 loat valve. Low pressure only. ll combinations with below components: 151 BS1212/1- LP plastic seat 8 arm 6,79 Brass piston LP plastic seat - rm like in art. - - Tail like in art. - - Nut like in art. - 151 L BS1212/1- LP plastic seat 3 tail 6 arm 6,81 rt 296 ø 4 rt 301 ø 4
24 Recommended combinations rt. -BS1212/1 - B1 HP plastic seat 13 arm - 5/16 thread HP 11,16 B2 LP plastic seat 13 arm - 5/16 thread LP 11,38 BS1212/1 loat valve. High pressure (HP) or low pressure (LP). D1 HP plastic seat Brass nuts 13 arm - 5/16 thread HP 11,71 BS1212/1- HP plastic seat 1/4 LP plastic seat D2 LP plastic seat Brass nuts 13 arm - 5/16 thread LP 11,94 BS1212/1- L1 HP plastic seat 3 tail 13 arm - 5/16 thread HP 11,39 HP plastic seat LP plastic seat 7/16 L2 LP plastic seat 3 tail 13 arm - 5/16 thread LP 11,62 N1 HP plastic seat Brass nuts 3 tail 13 arm - 5/16 thread HP 11,95 N2 LP plastic seat Brass nuts 3 tail 13 arm - 5/16 thread LP 12,17 D1 BS1212/1- HP plastic seat Brass nuts 15 arm - 7/16 thread HP 28,04 rt 296 rt 301 D2 BS1212/1- LP plastic seat Brass nuts 15 arm - 7/16 thread LP 28,26
25 Recommended combinations rt. 330-BS1212/1 Equilibrium 330 Brass LP brass seat Brass nuts 10 arm 7,75 rt 296 rt 301 rt. 201-BS1212/2 Diaphragm Plastic 330 201 B3 Brass LP plastic seat 10 arm HP brass seat 1/8 Brass nuts 6,95 6,64 BS1212/2 loat valve. 201 1 Plastic HP plastic seat 1/8 Plastic piston 5,78 rt 296 rt 301 Plastic 201 2 LP plastic seat 1/4 Plastic piston 5,81 rt. 315 315 C BS1212/1 float valve HP plastic seat 1/8 Plastic piston 10 arm 7,90 Elevated float valves with copper pipe for bottom inlet. 315 D BS1212/2 float valve HP plastic seat 1/8 Plastic piston 9,19 rt 296 rt 301
26 ittings for BS1212/1 877 019 018 051 864 112 6 arm for BS1212/1-8 arm for BS1212/1-10 arm for BS1212/1-13 arm for BS1212/1-15 arm for BS1212/1- Locknut only 1,05 1,22 1,38 2,38 3,51 0,15 rm with locknut 338 875 339 383 901 900 865 Plastic seat: HP 1/8 for BS1212/1- LP 1/4 for BS1212/1- LP for BS1212/1 LP HP 1/4 for BS1212/1- LP for BS1212/1- HP for BS1212/1- LP 7/16 for BS1212/1-0,09 0,09 0,10 0,11 0,15 0,15 0,15 Seat 124 Brass seat: HP 1/8 for BS1212/1-0,27 305 315 072 384 858 Plastic piston for BS1212/1- for BS1212/1- for BS1212/1 LP for BS1212/1- for BS1212/1-0,12 0,42 1,46 1,47 2,38 Piston with washer 769 888 Plastic backnuts 0,17 0,22 Backnut in couples 228 233 856 Brass backnuts 0,84 1,11 2,22 280 322 770 Seat joint ring for BS1212/1- Seat joint ring for BS1212/1- Seat joint ring for BS1212/1-0,03 0,03 0,08 Seat joint ring
27 ittings for BS1212/2 356 Plastic discharge assemblies for BS1212/2 0,26 Discharge assemblies 354 Diaphragm for BS1212/2 0,14 Diaphragm 023 rm with float adjuster 1,75 120 loat adjuster only 0,46 rm with float adjuster Seat Backnut Seat joint ring : look at ittings for BS1212/1
Condizioni di vendita: Sale conditions Conditions de vente Condiciones de ventas - Sconto massimo: Maximum discount Escompte maximal Descuento maximo - Trasporto merce resa: Transport Transport Transporte - Imballo e confezioni: Packing Emballage Empaque - Pagamento: Payment Paiement Pago
ESSETI s.r.l. 25030 BRNDICO (Brescia) Italy via E. ermi, 64 - Tel. ++39.030.975115 Telefax ++39.030.975891 e-mail: info@esseti-srl.com http://www.esseti-srl.com Mod. ZL001/11/01