Why silicon MEMS? MEMS@KTH. Silicon is a strong material... Photolithography. Micromachining. Dicing and packaging

Similar documents
Fabrication Challenges for Point-ofcare Diagnostics and Organ-on-chip

Fraunhofer ISIT, Itzehoe 14. Juni Fraunhofer Institut Siliziumtechnologie (ISIT)

Rapid Prototyping and Development of Microfluidic and BioMEMS Devices

Case Study 2: Digital Micromirror Devices (DMD) Optical MEMS

AMFitzgerald Company Overview

III. MEMS Projection Helvetica 20 Displays

MEMS Processes from CMP

Low loss fiber to chip connection system for telecommunication devices

Sandia Agile MEMS Prototyping, Layout Tools, Education and Services Program

Biaxial tripod MEMS mirror and omnidirectional lens for a low cost wide angle laser range sensor

Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia

Towards 17 µm pitch heterogeneously integrated Si/SiGe quantum well bolometer focal plane arrays

Low-cost Platform Technology for LWIR Sensor Arrays for Use in Automotive Night Vision and Other Applications

Photolithography. Class: Figure Various ways in which dust particles can interfere with photomask patterns.

Focused Ion beam nanopatterning: potential application in photovoltaics

Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / LCMS Grenoble)

MEMS mirror for low cost laser scanners. Ulrich Hofmann

IBS - Ion Beam Services

Fundamentals and Applications of Microfluidics

CIRCUITS AND SYSTEMS- Assembly and Printed Circuit Board (PCB) Package Mohammad S. Sharawi ASSEMBLY AND PRINTED CIRCUIT BOARD (PCB) PACKAGE

Fiber Optics: Engineering from Global to Nanometer Dimensions

Micro-optical switches for future telecommunication payloads : achievements of the SAT 'N LIGHT Project

Lab-on-a-Chip Design + Foundry Service

A Novel Flex Circuit Area-Array Interconnect System for a Catheter-Based Ultrasound Transducer

Silicon-On-Glass MEMS. Design. Handbook

Soft lithography for diffractive microfabrications

Integration of a passive micro-mechanical infrared sensor package with a commercial smartphone camera system

Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.

Specializing in Open Cavity Packages & Complete IC Assembly Services ISO 9001:2008 Certified and ITAR Registered

Why Being Small? Savings in time & cost. Disposable Parallel processing Integration/Automation. Gain from the unique microscopic features

Solar Photovoltaic (PV) Cells

Dry Film Photoresist & Material Solutions for 3D/TSV

Deposition Overview for Microsytems

Supporting Online Material for

1. INTRODUCTION ABSTRACT

Miniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M

MEMS devices application based testing

Amorphous Silicon Backplane with Polymer MEMS Structures for Electrophoretic Displays

Chalmers Publication Library

Thermal Flow Sensor Die

How to Build a Printed Circuit Board. Advanced Circuits Inc 2004

Micro-Power Generation

Strategy for Functional Material Development in FUJIFILM

How to measure absolute pressure using piezoresistive sensing elements

Fraunhofer Institute for Material and Beam Technology

State-of-Art (SoA) System-on-Chip (SoC) Design HPC SoC Workshop

Electrical tests on PCB insulation materials and investigation of influence of solder fillets geometry on partial discharge

Winbond W2E512/W27E257 EEPROM

Usage of Carbon Nanotubes in Scanning Probe Microscopes as Probe. Keywords: Carbon Nanotube, Scanning Probe Microscope

Projects and R&D activities

Low-cost Printed Electronic Nose Gas Sensors for Distributed Environmental Monitoring

Sensori ottici e laser nelle applicazioni industriali

PROVIDING TECHNICAL SOLUTIONS FOR BIOLOGICAL PROCESSES AND MEDICAL DEVICES

STUDENT PROFILES M.TECH IN RADIO FREQUENCY DESIGN AND TECHNOLOGY

Thin Is In, But Not Too Thin!

Nordson EFD Solutions: Fluid Positioning & Precision Dispensing in Mobile Device and Wearables Manufacturing

Recent developments in high bandwidth optical interconnects. Brian Corbett.

Development of High-Speed High-Precision Cooling Plate

The pole Optique-Rhône. Rhône-Alpes: a booster of innovation in Optics&Photonics

Acoustic/Electronic stack design, interconnect, and assembly Techniques available and under development

MICRO DROPLET GENERATION TECHNOLOGY

A Promising Energy Source for Portable MEMS Devices

ENS 07 Paris, France, 3-4 December 2007

to realize innovative electronic products 2 June 13, 2013 Jan Eite Bullema 3D Printing to realize innovative electronic products

Development of Ultra-Multilayer. printed circuit board

Volumes. Goal: Drive optical to high volumes and low costs

Development of New Inkjet Head Applying MEMS Technology and Thin Film Actuator

Biomedical applications of polypyrrole microactuators: from single-cell clinic to microrobots

Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / Grenoble)

ECP Embedded Component Packaging Technology

MEMS-based micropumps in drug delivery and biomedical applications

Lapping and Polishing Basics

Intelligent Measurement and Diagnostic Techniques for Non-destructive Inspections

Design and Simulation of MEMS Vibration Sensor for Launch Vehicles

Wafer Level Testing Challenges for Flip Chip and Wafer Level Packages

Introduction to Microfluidics. Date: 2013/04/26. Dr. Yi-Chung Tung. Outline

Chapter 1 Introduction to The Semiconductor Industry 2005 VLSI TECH. 1

FVA THIRD-GENERATION VERTICAL SATURATED-STEAM STERILIZERS

How To Choose A Total Organic Carbon Analyzer

Flexible Mehrlagen-Schaltungen in Dünnschichttechnik:

Leti Introduction and Overview

Towards a miniaturized micromechanical electronic nose SYWERT H. BRONGERSMA SR. PRINCIPAL RESEARCHER

Design for Microfluidic Device Manufacture Guidelines

Injection moulding and modelling on a micro scale

Silicon Drift Detector Product Brochure Update 2013

Multilevel Socket Technologies

Pressure sensors for automotive HVAC systems

J.F. Ready, D.F. Farson, T. Feeley (Eds.): LIA Handbook of Laser Materials Processing ISBN Springer-Verlag Berlin Heidelberg New York

Innovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions

(Amplifying) Photo Detectors: Avalanche Photodiodes Silicon Photomultiplier

Automatisierte, hochpräzise Optikmontage Lösungen für die Industrie

LASER CUTTING OF STAINLESS STEEL

The role of the magnetic hard disk drive

Transcription:

Why silicon MEMS? MEMS@KTH Small Identical Large volumes (low cost per unit) School of Electrical Engineering Royal Institute of Technology Silicon is a strong material... Photolithography 10 µm thick silicon wafer (Virginia Semiconductor Inc.) SEM-picture of the deflection of a silicon cantilever beam (Material Science, Uppsala University). Photoresist spin-on process From Madou Talks Dicing and packaging Micromachining Dicing of silicon wafer Electronics chip package Pressure sensor chip package (a) (b) (c) MEMS at DARPA 1

Micromachining Our Main Research Areas MEMS at DARPA MED-MEMS BIO-MEMS OPTO-MEMS RF-MEMS Ultraminiaturized Blood Pressure Sensor Aorta Coronary artery Diaphragm Piezoresistor P a P d MED-MEMS Stenosis Guide-wire Pressure sensor location Diced chip 100 µm Cavity Pressure sensor chips and a 1mm cannula needle Commercialised by RADI Medical Systems, Uppsala Modern surgery A Lift Force Gas Flow Sensor Principle Application Ventilator F lift Flow sensor Flow Sensors Flow Flow Realization α 6.8 mm 3 mm Detector beam with polysilicon strain-gauge Source: Annual Report Instrumentarium 2

Modern surgery An integrated IR gas analysis system Ventilator CO 2 sensor Application Reference sources Sample sources CO 2 Sensor IR-source chip Al bonding pads CO 2 -filter chip CO 2 1 mm Silicon wafers CO 2 chamber Gas flow 10 mm Gas flow IR bandpass filter IR-detector Glass wafer Source: Annual Report Instrumentarium Modern surgery Origin of Biopotentials Micromachined EEG Electrode Biopotential Electrodes Source: http://www.asci.org/artsci2001/fisher1.html Source: Annual Report Instrumentarium Source: http://www.psc.edu/science/goddard/goddard.html The Outer Skin - An Electrical Insulator Micromachined EEG Electrode Array of Microspikes Micromachined EEG Electrode Stratum Corneum Ion Current No Sensory Organs Spiked Electrode No Gel! 3

Microspike Array Barbed Spikes for Chip Skin Attachment 0.03 mm 0.16 mm Attachment Performance Micromachined EEG Electrode EEG Recording Micromachined EEG Electrode 15 Zipprep Electrode Spiked Electrode 10 5 EEG [µv] 0-5 -10 Measured with Datex-Ohmeda S/5 Monitor 0 1 2 3 4 5 Time [s] Similar Signals Modern surgery The Outer Skin - A Biochemical Barrier Transdermal Liquid Delivery Drug Stratum Corneum Transdermal Drug Delivery No Sensory Organs Dendritic Cells Source: Annual Report Instrumentarium 4

Standard Hypodermic Needles Transdermal Liquid Delivery Transdermal Drug Delivery System Microneedles Painful Intradermal delivery difficult Hollow Microneedle Design Issues Microneedles Side-Opened Microneedles Delivery Area Skin Penetration Bore Diameter Clogging Freedom of Design Hypodermic- and Microneedles 5

Nano-Sharp Hollow Microneedles Transdermal Drug Delivery System SEM-pictures of the microneedle. The sharp tip is a result of a final oxidation and a consecutive oxide strip. The needle tip radius is below 100 nm. Expandable Microspheres Dosing and Actuation Unit Test Result Principle Application 1 bar Lab-on-a-Chip BIO-MEMS 6

Biosensor System for Drugs and Explosives A MEMS Air-to-Liquid Particle Collector Thermally responsive PDMS composite Expandable beads mixed with PDMS (XB-PDMS) The interface was incorporated in an electronic nose system and successfully detected heroin and cocaine samples Large thermal expansion (> 100%) High flexibility inherited from the silicone elastomer PDMS Non-toxic and chemically inert Highly integrable actuator Allows for various fabrication methods e.g. soft lithography, casting, spinning In collaboration with Biosensor Applications Sweden AB (www.biosensor.se) XB-PDMS Actuator Prototype Expandable Beads XB-PDMS Actuator Operation Expandable Beads Microfluidic demonstrator showing the multilayer structure No heat => Open valve Heat => Closed valve B. Samel, V. Nock, A. Russom, P. Griss, G. Stemme, Transducers 2005 B. Samel, J. Melin, P. Griss, G. Stemme IEEE MEMS 2005 Microfluidic Network XB-PDMS Valves & Pumps XB-PDMS Lab-on-a-Chip Movies XB-PDMS Valves & Pumps B. Samel, P. Griss, G. Stemme, Transducers 2005 B. Samel, P. Griss, G. Stemme, Transducers 2005 7

Transdermal Drug Delivery Patch Transdermal patch Figure 2. Schematic view of the micromachined drug delivery device in development by KTH. OPTO-MEMS Figure 2. Schematic view of the micromachined drug delivery device in development by KTH. Micro Mirror Optical Router Digital Mirror Device Board contains a 2000 x 1000 array of 16 x 16 µm micromirror devices The micro-mirrors route information in the form of photons to and from any of 256 input/output optical fibers. Lucent Technologies Inc. Source: Light-Wave Magazine, Vol.17, No. 1, 2000 Texas Instruments Inc. MEMS and IC Compatibility Torsional Monocrystalline Silicon Micromirrors The Task The integration of high-performance MEMS materials with Integrated Circuitry Concept Hinge Realization The Problem Limited thermal budget, i.e. post IC processes must be below 450 C A Solution Wafer-level film transfer using adhesive bonding Mirror Membrane Distant Holder F. Niklaus, S. Haasl and G. Stemme, S3-MST, KTH Post Addressing Electrode Application Areas: Pattern Generators in Maskless Lithography Systems Optical Switch and Cross Connector Arrays 8

Wafer-Level Integrated IR Detector Arrays with CMOS Legs Membrane (Thermistor) Vias RF-MEMS Bolometer arrays with 320x 240 pixels, 0.7 µm thick membranes, 40x40 µm2 pitch size and 3x3 µm2 small vias. Allows the combination of high performance bolometer materials with CMOS read out electronic. MEMS Switch ( Conventional ) Novel MEMS Switch Concept Majumder, 1997 Realization of Novel MEMS Switch Concept MEMS Switch Projects Telecommunication MEMS Switch Projects: Automotive Radar (Vinnova) Automated Cross-Connects (Network Automation) 9

MEMS Switch Arrays top part top electrode pads membrane electrode pads MEMS = M M$? signal IN pads bottom part signal OUT pads 3 mm assembled switch 5x5(x2) unit, 2x2(x2) switch array assembled 20x20(x2) switch array 10