Projects and R&D activities

Size: px
Start display at page:

Download "Projects and R&D activities"

Transcription

1 Projects and R&D activities J.M. Jimenez On behalf of the Vacuum, Surface and Coatings Group (VSC)

2 Vacuum, Surface and Coatings group* Mandate Design, construction, operation, maintenance and upgrade of high & ultra-high vacuum systems for Accelerators and Detectors. Expertise and support on thin-walled vacuum chambers, windows and bellows compensation systems Expertise in vacuum sealing and leak-tightness technology Management of the industrial support contract for vacuum work in accelerators Coatings, surfaces treatments, surface and chemical analysis for Accelerators & Detectors. Expertise and support in the fields of: Coatings, electroplating and surface cleaning techniques UHV characterization and of material and surfaces Degassing analysis and treatment

3 Vacuum, Surface and Coatings group* Structure * Valid from January 1 st, 2008

4 R&D related to CERN Projects (1) Operation of existing accelerators o LHC Vacuum pilot sectors o Pumping of and leak localization in big volumes containing large quantities of water and/or helium o Interventions on arcs with a limited warming up o Upgrade of bake out regulation controller & study of new heating and insulation approaches o Operation with collimators Engineering studies o Analysis and design of beam windows o Aluminum bellows for experiments o Composite beam vacuum chambers o Characterization of corrosion

5 R&D related to CERN Projects (2) Monitoring & Controls o Control system development & upgrade of monitoring, e.g. alarms, interlocks, remote operation of diagnostics, etc o New users interfaces for RGA & helium leak detectors o Controls for Electron Cloud & Vacuum Pilot Sectors Dynamic vacuum & studies on related phenomenon o Stimulated desorption (electrons, photons, low and high energy ions) o Electron cloud (PS,SPS, LHC) o Secondary electron yield measurements (RT, ceramics, cold surfaces), coatings and clearing electrodes o Gas density simulations Laboratory activities o Vacuum laboratory for everyday work (leak detection, pumping devices, outgassing of metals and plastics, ESD, vacuum gauges, thermal desorption spectroscopy, permeation ) o Outgassing measurements (high outgassing, UHV-type and big samples) o Calibration stands for all gauges and RGAs o Preservation of bakeout (water vapour, CLIC application) o Leak detection : ultrasonic, H 2, Ne 22 o Sparking studies for CLIC accelerating structures (optical, electrical, vacuum)

6 R&D related to CERN Projects (3) Cleaning methods o Follow up of solvent and detergent o Replacement of perchloroethylene o Dry means (plasma O 2, H 2, radicals ) o Coatings facilities o Carbon coatings and Low temperature NEG o XPS upgrade (quality control of coating) o Follow up of available devices to be use for surface analysis Chemistry o Raman spectroscopy (vibrational spectroscopy to complete the analysis panel, characterize carbon coatings, cleaning efficiency and characterization of pollution) Resins and polymers o Cianate ester based resins (large temperature working range, radiation resistant) o 3D photolithography for mould realization

7 LHC Upgrade project Approved Triplet upgrade (Q1-D2): vacuum issues, cold bore insulation, radiation hard polymers Consolidation and upgrade of detectors (Q1-Q1): new experimental chambers, vacuum profile simulations, ageing of fluids under radiation Control system development & upgrade of monitoring (alarms, interlocks, remote operation of diagnostics) Support to AB for new LSS equipment Collimators new phases: study of new materials

8 New injectors LINAC4 vacuum systems, control, layout and related studies, surface treatments and plating Approved, being procured and installed SPL studies for layout, vacuum systems, cryostat insulation vacuum, cavity surface treatments Design study by end 2011 PS2 vacuum systems and layout Design study by end 2011

9 SPS Upgrade Design study by end 2011 Study of low SEY coatings for e-cloud reduction: coatings, lab characterization, SPS liner testing. Prototype dipole coating Study of clearing electrodes (classical and enamel) Studies for scaling-up to full machine

10 CLIC and CTF3 CLIC Design study by end 2011 Material testing: resistance to high voltage breakdown (experiments and simulations), thermal fatigue testing with laser Surface treatments for accelerating structures Vacuum design, study of water outgassing in small pipes, outgassing of breakdowns, numerical modelling for CLIC modules, novel vacuum chamber designs CTF3 vacuum layout and installation Being installed and operated

11 HIE-ISOLDE Project approved Development of cavity fabrication method, surface treatments, niobium coating Cryostat design (common vs. separate vacuum) General vacuum systems and layout

12 Other projects Technology Transfer Working well with various European companies and Labs CAST (vacuum and He environments) Being operated MedAUSTRON Project approved (Austrian funding) LHeC Feasibility study N-TOF (corrosion studies) Being operated

Large Systems Commissioning

Large Systems Commissioning Large Systems Commissioning, DESY CAS Vacuum in Accelerators Platja D`Aro, May 21, 2006 Special thanks to O. Gröbner 1 Outline Introduction Pump Down and Leak Check Components Check Bake Out Interlocks/Safety

More information

The Electron Cloud Problem and Potential Remedies R. Cimino LNF-INFN Frascati (Roma) Italy.

The Electron Cloud Problem and Potential Remedies R. Cimino LNF-INFN Frascati (Roma) Italy. The Electron Cloud Problem and Potential Remedies R. Cimino LNF-INFN Frascati (Roma) Italy. Introduction: DaΦne and the e-cloud The e- cloud problem: The LHC case Surface science techniques to provide

More information

Vacuum Pumping of Large Vessels and Modelling of Extended UHV Systems

Vacuum Pumping of Large Vessels and Modelling of Extended UHV Systems Vacuum Pumping of Large Vessels and Modelling of Extended UHV Systems Georgy L. Saksaganski D.V. Efremov Institute, St Petersburg, Russia gruss@niiefa.spb.su An overview of the methods for reducing of

More information

Status of the Diamond Storage Ring RF Systems. Morten Jensen on behalf of Diamond Storage Ring RF Group

Status of the Diamond Storage Ring RF Systems. Morten Jensen on behalf of Diamond Storage Ring RF Group Status of the Diamond Storage Ring RF Systems Morten Jensen on behalf of Diamond Storage Ring RF Group Content 1. General Operational Status 2. Main issues and causes of trips 3. 200 ma + operation Qext

More information

FCC 1309180800 JGU WBS_v0034.xlsm

FCC 1309180800 JGU WBS_v0034.xlsm 1 Accelerators 1.1 Hadron injectors 1.1.1 Overall design parameters 1.1.1.1 Performance and gap of existing injector chain 1.1.1.2 Performance and gap of existing injector chain 1.1.1.3 Baseline parameters

More information

ME349 Engineering Design Projects

ME349 Engineering Design Projects ME349 Engineering Design Projects Introduction to Materials Selection The Material Selection Problem Design of an engineering component involves three interrelated problems: (i) selecting a material, (ii)

More information

Cleaning Methods of SRF Power Couplers. Mircea Stirbet

Cleaning Methods of SRF Power Couplers. Mircea Stirbet Cleaning Methods of SRF Power Couplers Mircea Stirbet Principles - The FPC cleaning should start at the design stage - Continue during component manufacture, storage and transportation to the final destination.

More information

THE ALIGNMENT STRATEGY FOR THE SPIRAL2 SUPERCONDUCTING LINAC CRYOMODULES

THE ALIGNMENT STRATEGY FOR THE SPIRAL2 SUPERCONDUCTING LINAC CRYOMODULES THE ALIGNMENT STRATEGY FOR THE SPIRAL2 SUPERCONDUCTING LINAC CRYOMODULES R. Beunard, GANIL, BP 55027, 14076 CAEN, CEDEX 5, France Abstract The SPIRAL2* project, located at the GANIL** facility in Caen,

More information

bulk 5. Surface Analysis Why surface Analysis? Introduction Methods: XPS, AES, RBS

bulk 5. Surface Analysis Why surface Analysis? Introduction Methods: XPS, AES, RBS 5. Surface Analysis Introduction Methods: XPS, AES, RBS Autumn 2011 Experimental Methods in Physics Marco Cantoni Why surface Analysis? Bulk: structural function Electrical/thermal conduction Volume increases

More information

10 Project Costs and Schedule

10 Project Costs and Schedule II-367 10 Project Costs and Schedule 10.1 Overview The investment costs given in this chapter include all components necessary for the baseline design of TESLA, as described in chapters 3 to 9. Not included

More information

Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia

Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia Le nanotecnologie: dal Laboratorio al Mercato Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia Materials & Processes for micro nanotechnologies Laboratory http://www.polito.it/micronanotech

More information

Mechanical Operation and Maintenance Vacuum Group

Mechanical Operation and Maintenance Vacuum Group Mechanical Operation and Maintenance Vacuum Group AES-MOM Vacuum Group UHV support and services APS Argonne National Laboratory National Laboratories The AES-MOM Vacuum Group at Argonne National Laboratory

More information

Reliability and Availability Aspects of. the IPHI Project

Reliability and Availability Aspects of. the IPHI Project Reliability and Availability Aspects of the IPHI Project Pierre-Yves Beauvais CEA/DSM/DAPNIA for the IPHI Team 18/02/2002 Pierre-Yves Beauvais, CEA Saclay 1 Table of contents Brief description of IPHI

More information

Beam Energy (GeV) 2 Beam Current (ma) 400 Horizontal Emittance (nm) 16.960

Beam Energy (GeV) 2 Beam Current (ma) 400 Horizontal Emittance (nm) 16.960 7. Vacuum System 7.1 Introduction Beam lifetime and beam stability are of major importance to any synchrotron; the interaction of the stored particles with the residual gas molecules leads to particles

More information

Specifications for Programs: 737, 747, 757, 767, 777, 787

Specifications for Programs: 737, 747, 757, 767, 777, 787 = Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners

More information

"In-situ" calibration of QMS for gas flow measurements

In-situ calibration of QMS for gas flow measurements Institute of Metals and Technology, Ljubljana, Slovenia "In-situ" calibration of QMS for gas flow measurements Janez Šetina, Bojan Erjavec Institute of Metals and Technology Lepi pot 11, 1000 Ljubljana

More information

Zero Degree Extraction using an Electrostatic Separator

Zero Degree Extraction using an Electrostatic Separator Zero Degree Extraction using an Electrostatic Separator L. Keller Aug. 2005 Take another look at using an electrostatic separator and a weak dipole to allow a zero degree crossing angle a la the TESLA

More information

Ceralink Capabilities and Opportunities

Ceralink Capabilities and Opportunities Ceralink Capabilities and Opportunities Dr. Holly Shulman President, Materials Scientist Ceralink Inc. Rensselaer Technology Park 105 Jordan Rd. Troy, New York 12180 holly@ceralink.com www.ceralink.com

More information

UHV Guidelines for X-Ray Beam Transport Systems

UHV Guidelines for X-Ray Beam Transport Systems XFEL.EU TN-2011-001-05 TECHNICAL NOTE UHV Guidelines for X-Ray Beam Transport Systems M. Dommach for X-Ray Optics and Beam Transport (WP73) at the European XFEL European X-Ray Free-Electron Laser Facility

More information

NASDAQ:BLDP TSX:BLD. Smarter Solutions for a Clean Energy Future

NASDAQ:BLDP TSX:BLD. Smarter Solutions for a Clean Energy Future NASDAQ:BLDP TSX:BLD Smarter Solutions for a Clean Energy Future Fuel Cell Engineering Services Smarter Solutions for a Clean Energy Future Corporate Background Ballard Power Systems, Inc. is a recognized

More information

Introduction to vacuum gauges. Vacuum Gauges where the Pressure Readings are Independent of the Type of Gas (Mechanical Vacuum Gauges)

Introduction to vacuum gauges. Vacuum Gauges where the Pressure Readings are Independent of the Type of Gas (Mechanical Vacuum Gauges) Introduction to vacuum gauges Vacuum Gauges where the Pressure Readings are Independent of the Type of Gas (Mechanical Vacuum Gauges) BOURDON Vacuum Gauge The inside of a tube which is bent into a circular

More information

Expression of Interest in providing design and manufacturing of detectors for the construction of the European X-ray Free Electron Laser Facility

Expression of Interest in providing design and manufacturing of detectors for the construction of the European X-ray Free Electron Laser Facility Wrocław Technology Park 54-424 Wrocław, Expression of Interest in providing design and manufacturing of detectors for the construction of the European X-ray Free Electron Laser Facility Introduction This

More information

The High Luminosity LHC (HL-LHC) Project at CERN: The Challenge Ahead

The High Luminosity LHC (HL-LHC) Project at CERN: The Challenge Ahead The High Luminosity LHC (HL-LHC) Project at CERN: The Challenge Ahead R. Kersevan Vacuum Surfaces and Coatings Group, Technology Department, CERN, Geneva The HiLumi LHC Design Study is included in the

More information

the runnerless types of molds are explained post molding operations are described the basic methods of applied decoration methods are examined

the runnerless types of molds are explained post molding operations are described the basic methods of applied decoration methods are examined Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the various plastic finishing processes used in industry and their

More information

Autoclave Safety. Autoclaves are sterilizers using high pressure and high temperature steam. The potential safety risks for the operators are:

Autoclave Safety. Autoclaves are sterilizers using high pressure and high temperature steam. The potential safety risks for the operators are: Autoclave Safety Purpose: Sterilization refers to the complete killing of all living organisms, including spores. Common sterilization techniques include the application of wet heat, dry heat, chemicals,

More information

MSU View of RIA R&D Priorities. R.C. York August 2003

MSU View of RIA R&D Priorities. R.C. York August 2003 MSU View of RIA R&D Priorities R.C. York August 2003 1 Guiding Principles Highest priority given to those technical issues that if unresolved pose a significant risk to project success as measured by:

More information

SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM

SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Packaged rooftop air conditioning unit (5 tons and smaller). 2. Roof curb. 1.2

More information

QGA Quantitative Gas Analyser

QGA Quantitative Gas Analyser QGA Quantitative Gas Analyser A compact bench-top system for real-time gas and vapour analysis Detailed product information / introduction catalysis studies environmental gas analysis fermentation off-gas

More information

PIEZOELECTRIC FILMS TECHNICAL INFORMATION

PIEZOELECTRIC FILMS TECHNICAL INFORMATION PIEZOELECTRIC FILMS TECHNICAL INFORMATION 1 Table of Contents 1. PIEZOELECTRIC AND PYROELECTRIC EFFECTS 3 2. PIEZOELECTRIC FILMS 3 3. CHARACTERISTICS PROPERTIES OF PIEZOELECTRIC FILMS 3 4. PROPERTIES OF

More information

The commissioning of the LHC: first the technical systems, then the commissioning with beam

The commissioning of the LHC: first the technical systems, then the commissioning with beam The commissioning of the LHC: first the technical systems, then the commissioning with beam Roberto Saban 4. Ulusal Parçacık Hızlandırıcıları ve Uygulamaları Kongresi 30 Ağustos 1 Eylül 2010, Bodrum -

More information

SolCalor B.V. is officiel Benelux Service Center of SRB-Energy. Marktstraat 23, 5701 RM, Helmond, The Netherlands. Tel: +31-(0)492574286 Website:

SolCalor B.V. is officiel Benelux Service Center of SRB-Energy. Marktstraat 23, 5701 RM, Helmond, The Netherlands. Tel: +31-(0)492574286 Website: SolCalor B.V. is officiel Benelux Service Center of SRB-Energy. Marktstraat 23, 5701 RM, Helmond, The Netherlands. Tel: +31-(0)492574286 Website: www.solcalor.nl Email: info@solcalor.nl Who is SRB-Energy?

More information

LEAD CRYSTAL. User Manual. Valve-regulated lead-crystal batteries Energy storage Cells

LEAD CRYSTAL. User Manual. Valve-regulated lead-crystal batteries Energy storage Cells Engineering Production Sales LEAD CRYSTAL Valve-regulated lead-crystal batteries Energy storage Cells User Manual www.axcom-battery-technology.de info@.axcom-battery-technology.de Chapter 1: 1. Introduction

More information

Introduction to Manufacturing Process

Introduction to Manufacturing Process Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per

More information

WHAT IS INFRARED (IR) THERMOGRAPHY

WHAT IS INFRARED (IR) THERMOGRAPHY WHAT IS INFRARED (IR) THERMOGRAPHY IR Thermography is the technique of producing pictures called from the invisible thermal radiation that objects emit. This is a non-contact means of identifying electrical

More information

How compact discs are made

How compact discs are made How compact discs are made Explained by a layman for the laymen By Kevin McCormick For Science project at the Mountain View Los Altos High School Abstract As the major media for music distribution for

More information

What We Do. Our Expertise. History. Mission. Vision

What We Do. Our Expertise. History. Mission. Vision Corporate Brochure What We Do Warsash Scientific is a leading supplier of scientific instruments and components serving Australian and New Zealand research, defence and industry since 1976. We specialise

More information

Vacuum Chambers and Special Components. Mechanical Manufacturing. Surface Treatment and Finishing of Components. Examples from Our Production

Vacuum Chambers and Special Components. Mechanical Manufacturing. Surface Treatment and Finishing of Components. Examples from Our Production Design Mechanical Manufacturing Welding Technology Surface Treatment and Finishing of Components Quality Control Examples from Our Production Contents Introduction Page -3 Design Production Drawings and

More information

FIVE PROJECTS OF HIGH RF POWER INPUT COUPLERS & WINDOWS FOR SRF ACCELERATORS*

FIVE PROJECTS OF HIGH RF POWER INPUT COUPLERS & WINDOWS FOR SRF ACCELERATORS* FIVE PROJECTS OF HIGH RF POWER INPUT COUPLERS & WINDOWS FOR SRF ACCELERATORS* Quan-Sheng Shu, Joe Susta, Guangfeng Cheng AMAC International Inc., 12050 Jefferson Ave, Newport News, VA 23606 Abstract Various

More information

Electrical Maintenance Workshop

Electrical Maintenance Workshop Electrical Maintenance Workshop Transformer Maintenance & Testing Thursday, November 6, 2003 Transformer Maintenance & Testing Purpose This presentation provides an overview of the major considerations

More information

Heat Trace Fundamentals. Monte Vander Velde, P.E. President, Interstates Instrumentation

Heat Trace Fundamentals. Monte Vander Velde, P.E. President, Interstates Instrumentation Heat Trace Fundamentals Monte Vander Velde, P.E. President, Interstates Instrumentation Contents Introduction... 3 Purpose of Heat Trace... 3 Types of Heat Trace... 4 Steam Trace vs. Electric Trace...

More information

Microwave absorbing tiles:

Microwave absorbing tiles: On the basis of the results obtained from the first project activities, the grinding conditions on a larger scale were determined. As regards the sintering, an adjustment has been made to the roller furnaces

More information

Aluminium Technology & Production in Russia

Aluminium Technology & Production in Russia L Aluminium Technology & Production in Russia Victor Mann, Deputy General Manager, s Construction Division Soderberg technology Over 80% of aluminium in Russia is manufactured on the basis of Soderberg

More information

Activities at the University of Frankfurt (IAP)

Activities at the University of Frankfurt (IAP) Activities at the University of Frankfurt (IAP) Holger Podlech Ulrich Ratzinger Oliver Kester Institut für Angewandte Physik (IAP) Goethe-Universität Frankfurt am Main H. Podlech 1 Development of 325 MHz

More information

New Machine Layout in IR3 and IR7

New Machine Layout in IR3 and IR7 CERN CH-1211 Geneva 23 Switzerland the Large Hadron Collider project LHC Project Document No. EDMS Document No. 474750 Engineering Change requested by ( Name & Div./Grp. ) : R. Assmann, AB/ABP Date: 2004-05-26

More information

Electrical tests on PCB insulation materials and investigation of influence of solder fillets geometry on partial discharge

Electrical tests on PCB insulation materials and investigation of influence of solder fillets geometry on partial discharge , Firenze, Italy Electrical tests on PCB insulation materials and investigation of influence of solder fillets geometry on partial discharge A. Bulletti, L. Capineri B. Dunn ESTEC Material and Process

More information

Engineering Materials Research /DEVISER/

Engineering Materials Research /DEVISER/ DEVelopment of Infrastructure for Smart Engineering Materials Research /DEVISER/ A Czech structural funds project aimed for building a new public research infrastructure called Laboratory of Functional

More information

Cathode Ray Tube. Introduction. Functional principle

Cathode Ray Tube. Introduction. Functional principle Introduction The Cathode Ray Tube or Braun s Tube was invented by the German physicist Karl Ferdinand Braun in 897 and is today used in computer monitors, TV sets and oscilloscope tubes. The path of the

More information

Coating Technology: Evaporation Vs Sputtering

Coating Technology: Evaporation Vs Sputtering Satisloh Italy S.r.l. Coating Technology: Evaporation Vs Sputtering Gianni Monaco, PhD R&D project manager, Satisloh Italy 04.04.2016 V1 The aim of this document is to provide basic technical information

More information

h e l p s y o u C O N T R O L

h e l p s y o u C O N T R O L contamination analysis for compound semiconductors ANALYTICAL SERVICES B u r i e d d e f e c t s, E v a n s A n a l y t i c a l g r o u p h e l p s y o u C O N T R O L C O N T A M I N A T I O N Contamination

More information

FLEXIBLE CIRCUITS MANUFACTURING

FLEXIBLE CIRCUITS MANUFACTURING IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available

More information

Facilities Perspectives

Facilities Perspectives Facilities Perspectives of the Association Euratom-FZK - Overview and Mission Orientation - Important Facility Enhancements Facility Review Meeting May 27-28, 2008 M. Thumm, Deputy Head, Topic Fusion Technology,

More information

METAL-CLAD AND METAL-ENCLOSED SWITCHGEAR 3.6KV~40.5KV. tgood.com. Energy. Fast.

METAL-CLAD AND METAL-ENCLOSED SWITCHGEAR 3.6KV~40.5KV. tgood.com. Energy. Fast. METAL-CLAD AND METAL-ENCLOSED SWITCHGEAR 3.6KV~40.5KV tgood.com Energy. Fast. TGOOD produces over 5000 switchgear units annually for projects around the globe PRODUCT OVERVIEW Integral substation component

More information

DIE CASTING. This process if for high volume, high detail, and value added economically priced cast parts. HOW IT WORKS

DIE CASTING. This process if for high volume, high detail, and value added economically priced cast parts. HOW IT WORKS DIE CASTING PROCESS This process if for high volume, high detail, and value added economically priced cast parts. HOW IT WORKS A metal tool is built and attached to a furnace of molten metal Then molten

More information

Lecture 7 Thermal Insulation & Cryostat Basics. J. G. Weisend II

Lecture 7 Thermal Insulation & Cryostat Basics. J. G. Weisend II Lecture 7 Thermal Insulation & Cryostat Basics J. G. Weisend II Goals Introduce conduction, convection & radiation heat transfer as they apply to cryogenics Describe design techniques to reduce heat transfer

More information

GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. GS-23F-0126S

GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. GS-23F-0126S GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. 200 YELLOW PLACE ROCKLEDGE, FL 32955 PHONE 321-631-3550 FAX 321-631-3552 www.mainstream-engr.com TABLE OF CONTENTS CORPORATE EXPERIENCE...3

More information

Pore size and BET surface area. analysis at your fingertips. SA 3100. Gas Adsorption Analyzer

Pore size and BET surface area. analysis at your fingertips. SA 3100. Gas Adsorption Analyzer Pore size and BET surface area analysis at your fingertips. SA 3100 Gas Adsorption Analyzer The History of Beckman Coulter Particle Characterization Introducing The SA 3100 Surface Area and Pore Size Analyzer

More information

Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.

Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice. CMOS Processing Technology Silicon: a semiconductor with resistance between that of conductor and an insulator. Conductivity of silicon can be changed several orders of magnitude by introducing impurity

More information

Consortiwm Awdurdodau Lleol Cymru Consortium Local Authorities Wales

Consortiwm Awdurdodau Lleol Cymru Consortium Local Authorities Wales Consortiwm Awdurdodau Lleol Cymru Consortium Local Authorities Wales SPECIFICATION FOR LAUNDRY EQUIPMENT MAINTENANCE Maintenance Module 32 March 2011 issue This document has been compiled by the Engineering

More information

Leak detection of systems

Leak detection of systems Leak detection of systems detection and remove Serviceportfolio resom ltd. Hydraulic checking in production plant's Examination with special measuring technique incl. documentation and rental of the measuring

More information

Effective Cooling Method for Spin Casting Process

Effective Cooling Method for Spin Casting Process Effective Cooling Method for Spin Casting Process Yong-Ak Song, Sehyung Park, Yongsin Kwon Korea Institute of Science and Technology KIST, CAD/CAM Research Center P.O. Box 131, Cheongryang, Seoul, Korea

More information

Why Plastic Flows Better in Aluminum Injection Molds

Why Plastic Flows Better in Aluminum Injection Molds Why Plastic Flows Better in Aluminum Injection Molds An investigative study directly comparing melt flow characteristics of general purpose resins in QC-10 aluminum molds and P20 steel molds. By: David

More information

STM, LEED and Mass spectrometry

STM, LEED and Mass spectrometry STM, LEED and Mass spectrometry R. Schloderer, S. Griessl, J. Freund, M. Edelwirth, W.M. Heckl Introduction TDS UHV technique Preparation STM LEED QMS Concept of new UHV chamber Conclusion P. Cole, M.

More information

Avoiding Burning Through: Control the Inside Surface Temperature, Not the Pressure

Avoiding Burning Through: Control the Inside Surface Temperature, Not the Pressure Originally published in the Canadian Welding Association Journal, Spring 2013, pp 30 39 Welding on In service Pipelines: Dispelling Popular Myths and Misconceptions Bill Amend Sr. Principal Engineer, Welding

More information

A New Membrane System for Efficient Removal of Water from Gear Oil Road to Commercialization

A New Membrane System for Efficient Removal of Water from Gear Oil Road to Commercialization A New Membrane System for Efficient Removal of Water from Gear Oil Road to Commercialization Sudip Majumdar, Stuart Nemser Compact Membrane Systems, Wilmington, Delaware, USA Kal Farooq, Keith Benninghoff

More information

White Paper. Moisture in Hermetic Packages By Craig Hillman, PhD

White Paper. Moisture in Hermetic Packages By Craig Hillman, PhD White Paper Moisture in Hermetic Packages By Craig Hillman, PhD Moisture in Hermetic Packages Hermetic packaging of micro-electronic and opto-electronic devices is commonly utilized to protect the devices

More information

IBS - Ion Beam Services

IBS - Ion Beam Services IBS - Ion Beam Services Profile Technologies Devices & sensor fabricat ion Participation to R&D programs Researched partnership Présentation activité composant 1 Profile : Products and services Product

More information

R&D Support Services. Ad Astra Rocket Company

R&D Support Services. Ad Astra Rocket Company R&D Support Services About Us A Delaware Corporation, capitalizing on more than 25 years of NASA R&D PhD Scientists, engineers, technicians skilled in the design fabrication and testing of prototype hardware.

More information

medical application products

medical application products medical application products BIWI at it's customer's service ISO 9 0 01 / ISO13485 BIWI develops your projects from A to Z, according to your requirements. R&D phase Materials development via customised

More information

Short overview of TEUFEL-project

Short overview of TEUFEL-project Short overview of TEUFEL-project ELAN-meeting may 2004 Frascati (I) Contents Overview of TEUFEL project at Twente Photo cathode research Recent experience Outlook Overview FEL Drive laser Photo cathode

More information

Life Sciences. Analytical Instrumentation, Clinical Diagnostics, and Medical Devices. www.durexindustries.com

Life Sciences. Analytical Instrumentation, Clinical Diagnostics, and Medical Devices. www.durexindustries.com Life Sciences Analytical Instrumentation, Clinical Diagnostics, and Medical Devices www.durexindustries.com Durex Industries is a preferred supplier of high performance radiant, convection and conduction

More information

PROJECT HAZARD ASSESSMENT FORM CHEMICAL HAZARDS

PROJECT HAZARD ASSESSMENT FORM CHEMICAL HAZARDS PROJECT HAZARD ASSESSMENT FORM PI/SPONSOR: Completion of the following form will serve as a risk assessment, personal protective equipment (PPE) assessment and guide to required training for the activities

More information

Ion Beam Sputtering: Practical Applications to Electron Microscopy

Ion Beam Sputtering: Practical Applications to Electron Microscopy Ion Beam Sputtering: Practical Applications to Electron Microscopy Applications Laboratory Report Introduction Electron microscope specimens, both scanning (SEM) and transmission (TEM), often require a

More information

EVERYDAY ENGINEERING EXAMPLES FOR SIMPLE CONCEPTS

EVERYDAY ENGINEERING EXAMPLES FOR SIMPLE CONCEPTS EVERYDAY ENGINEERING EXAMPLES FOR SIMPLE CONCEPTS Thermal Properties ENGR 3350 - Materials Science Dr. Nedim Vardar Copyright 2015 Thermal Properties of Materials Engage: MSEIP Engineering Everyday Engineering

More information

Receiver für Salzschmelzen Der nächste Schritt in der Parabolrinnentechnologie

Receiver für Salzschmelzen Der nächste Schritt in der Parabolrinnentechnologie Receiver für Salzschmelzen Der nächste Schritt in der Parabolrinnentechnologie 16. Sonnensymposium, DLR Köln, 12.06.2013 Dr. Thomas Kuckelkorn, Dr. Patrick Haibach, Dr. Hanno Kamp, Dr. Markus Arntzen,

More information

STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM

STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM Installed in Pre-engineered Steel Buildings Provides Lowest Cost Construction Method for CORROSIVE AND WET Environments PREFERRED SOLUTIONS, INC.

More information

TOF FUNDAMENTALS TUTORIAL

TOF FUNDAMENTALS TUTORIAL TOF FUNDAMENTALS TUTORIAL Presented By: JORDAN TOF PRODUCTS, INC. 990 Golden Gate Terrace Grass Valley, CA 95945 530-272-4580 / 530-272-2955 [fax] www.rmjordan.com [web] info@rmjordan.com [e-mail] This

More information

Plastic Injection Molding

Plastic Injection Molding Training Objective After watching this video and reviewing the printed material, the student/trainee will understand the principles and physical operations of the plastic injection molding process. An

More information

CONSOLIDATION AND HIGH STRAIN RATE MECHANICAL BEHAVIOR OF NANOCRYSTALLINE TANTALUM POWDER

CONSOLIDATION AND HIGH STRAIN RATE MECHANICAL BEHAVIOR OF NANOCRYSTALLINE TANTALUM POWDER CONSOLIDATION AND HIGH STRAIN RATE MECHANICAL BEHAVIOR OF NANOCRYSTALLINE TANTALUM POWDER Sang H. Yoo, T.S. Sudarshan, Krupa Sethuram Materials Modification Inc, 2929-P1 Eskridge Rd, Fairfax, VA, 22031

More information

Solar Photovoltaic (PV) Cells

Solar Photovoltaic (PV) Cells Solar Photovoltaic (PV) Cells A supplement topic to: Mi ti l S Micro-optical Sensors - A MEMS for electric power generation Science of Silicon PV Cells Scientific base for solar PV electric power generation

More information

Vapor Chambers. Figure 1: Example of vapor chamber. Benefits of Using Vapor Chambers

Vapor Chambers. Figure 1: Example of vapor chamber. Benefits of Using Vapor Chambers Vapor Chambers A vapor chamber is a high-end thermal management device that can evenly dissipate heat from a small source to a large platform of area (see Figure 1). It has a similar construction and mechanism

More information

www.um.edu.mt Bachelors in Industrial Engineering Faculty of Engineering, University of Malta

www.um.edu.mt Bachelors in Industrial Engineering Faculty of Engineering, University of Malta www.um.edu.mt Bachelors in Industrial Engineering Faculty of Engineering, University of Malta Outline What is Industrial Engineering? Why study for B.Ind.Eng.(Hons)? Course structure Who offers this course?

More information

PLASMA TECHNOLOGY OVERVIEW

PLASMA TECHNOLOGY OVERVIEW PLASMA TECHNOLOGY OVERVIEW Plasmas are not a lab curiosity. Plasma processing has been an essential production tool for more than 30 years in the fabrication of microelectronic devices for example. Over

More information

Lecture 9. Surface Treatment, Coating, Cleaning

Lecture 9. Surface Treatment, Coating, Cleaning 1 Lecture 9. Surface Treatment, Coating, Cleaning These processes are sometimes referred to as post-processing. They play a very important role in the appearance, function and life of the product. Broadly,

More information

PROPERTY DRYING 00:00:00 00:01:00 00:02:00 00:03:00 00:04:00

PROPERTY DRYING 00:00:00 00:01:00 00:02:00 00:03:00 00:04:00 PROPERTY DRYING 00:00:00 00:01:00 00:02:00 00:03:00 00:04:00 Impact Emergency Aid 00:00:00 00:01:00 WHEN A RIVER BURSTS ITS BANKS Water damage has many causes, including frost, storms and flooding. Leaking

More information

Simulation of a small size solar assisted adsorption air conditioning system for residential applications

Simulation of a small size solar assisted adsorption air conditioning system for residential applications Heat Powered Cycles Conference 2009 2009 Simulation of a small size solar assisted adsorption air conditioning system for residential applications Salvatore Vasta, Andrea Frazzica, Gaetano Maggio, Alessio

More information

Key Elements of Vacuum Chamber Design: Will they all fit on a napkin or envelope??

Key Elements of Vacuum Chamber Design: Will they all fit on a napkin or envelope?? Key Elements of Vacuum Chamber Design: Will they all fit on a napkin or envelope?? Neil Peacock MKS Instruments, HPS Products Boulder Colorado neil_peacock@mksinst.com 23 Sept 2010 Intent This talk is

More information

ENERGY CARRIERS AND CONVERSION SYSTEMS Vol. II - Liquid Hydrogen Storage - Takuji Hanada, Kunihiro Takahashi

ENERGY CARRIERS AND CONVERSION SYSTEMS Vol. II - Liquid Hydrogen Storage - Takuji Hanada, Kunihiro Takahashi LIQUIDHYDROGEN STORAGE Takuji Hanada Air Liquide Japan Co., Ltd., Tokyo, Japan Kunihiro Center for Supply Control and Disaster Management, Tokyo Gas Co., Ltd., Tokyo, Japan Keywords: liquidhydrogen, insulation

More information

Vicot Solar Air Conditioning. V i c o t A i r C o n d i t i o n i n g C o., l t d Tel: 86-531-8235 5576 Fax: 86-531-82357911 Http://www.vicot.com.

Vicot Solar Air Conditioning. V i c o t A i r C o n d i t i o n i n g C o., l t d Tel: 86-531-8235 5576 Fax: 86-531-82357911 Http://www.vicot.com. Vicot Solar Air Conditioning V i c o t A i r C o n d i t i o n i n g C o., l t d Tel: 86-531-8235 5576 Fax: 86-531-82357911 Http://www.vicot.com.cn Cooling, heating, and domestic hot water. Return on investment

More information

PRELIMINARY COMPONENT INTEGRATION USING RAPID PROTOTYPING TECHNIQUES

PRELIMINARY COMPONENT INTEGRATION USING RAPID PROTOTYPING TECHNIQUES J! PRELIMINARY COMPONENT INTEGRATION USING RAPID PROTOTYPING TECHNIQUES by Ken Cooper National Aeronautics and Space Administration Building 4707, Marshall Space Flight Center George C. Marshall Space

More information

This chapter is devided into two sections:

This chapter is devided into two sections: This chapter is devided into two sections: Page Installation requirements........................................................................ 127 The installation process..........................................................................

More information

Computing and Engineering at CERN Employment and Training Opportunities for UK Students and Graduates

Computing and Engineering at CERN Employment and Training Opportunities for UK Students and Graduates Computing and Engineering at CERN Employment and Training Opportunities for UK Students and Graduates 1. Introduction As part of its commitment to CERN, STFC works to ensure that the UK profits as it should

More information

and LUMINOUS CHEMICAL VAPOR DEPOSITION INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A.

and LUMINOUS CHEMICAL VAPOR DEPOSITION INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A. LUMINOUS CHEMICAL VAPOR DEPOSITION and INTERFACE ENGINEERING HirotsuguYasuda University of Missouri-Columbia Columbia, Missouri, U.S.A. MARCEL MARCEL DEKKER. NEW YORK DEKKER Contents Preface iii Part I.

More information

Barrier Coatings: Conversion and Production Status

Barrier Coatings: Conversion and Production Status Transparent SiO 2 Barrier Coatings: Conversion and Production Status E. Finson and J. Felts, Airco Coating Technology, Concord, CA Keywords: Permeation barrier coatings; Reactive evaporation; SiO 2 ABSTRACT

More information

TITANIUM FABRICATION CORP.

TITANIUM FABRICATION CORP. TITANIUM FABRICATION CORP. Titanium, Zirconium, and Tantalum Clad Construction General Considerations In many applications, particularly for large pressure vessels designed for high temperature and pressure,

More information

Solutions Manufacturing Performance

Solutions Manufacturing Performance Solutions Manufacturing Performance Let s partner up for your project At RI Research Instruments we develop, design, manufacture and test high performance components and systems to the needs of our customers

More information

Quantum Computing for Beginners: Building Qubits

Quantum Computing for Beginners: Building Qubits Quantum Computing for Beginners: Building Qubits Suzanne Gildert Condensed Matter Physics Research (Quantum Devices Group) University of Birmingham 28/03/2007 Overview of this presentation What is a Qubit?

More information

DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE. November 15-19, 2015 Pittsburgh, PA, USA. Technical Program

DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE. November 15-19, 2015 Pittsburgh, PA, USA. Technical Program DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE November 15-19, 2015 Pittsburgh, PA, USA Technical Program Corrosion Policy Track: Topic: Corrosion Management T.S. NAVAIR Corrosion

More information

07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM

07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying

More information

Oil and Gas Pipeline Design, Maintenance and Repair

Oil and Gas Pipeline Design, Maintenance and Repair Oil and Gas Pipeline Design, Maintenance and Repair Dr. Abdel-Alim Hashem Professor of Petroleum Engineering Mining, Petroleum & Metallurgical Eng. Dept. Faculty of Engineering Cairo University aelsayed@mail.eng.cu.edu.eg

More information