Safety Solutions. and much more Accessories: brackets, stands, mirrors, lens shields, cables
|
|
|
- Vivian Parsons
- 10 years ago
- Views:
Transcription
1 Safety Solutions
2 Safety Solutions Safety Light Screens EZ-SCREEN with small footprint and space saving design Standard or cascadable versions Type 4 and Type 2 versions Versions with integrated muting available TL50 Tower Lights Self-contained tower light indicators use long-lasting LED technology, are simple to install, and provide highly visible operator guidance and equipment indication Available in high-intensity, sealed audible, and gray housing. Safety Controller Ideal to replace clusters of multiple safety relays Easy to configure, intuitive setup software Pre-programmed logic blocks like muting, two hand control Safety Controller Output Interface Module available Two-Hand Control Ergonomic design, avoids risk of repetitive strain injury With or without run bar stand Meets highest safety category Add EZ-LIGHTS for status indication in lean manufacturing and much more Accessories: brackets, stands, mirrors, lens shields, cables 2 Banner Engineering EMEA
3 The Machine Safety Specialist K50 EZ-LIGHT Compact, multi-colour indicators for lean manufacturing use solid-state switching technology to ensure a long service life Emergency Stop & Stop Control 30 mm mounting base enables easy installation and hookup with no assembly, individual wiring or additional enclosure required Flush Mount E-stops are available in four model styles: standard actuator, illuminated standard actuator, lockable actuator, and an illuminated lockable actuator Metal or plastic E-stop button and rope pull emergency stop switches also available Enabling Devices Provides safety function when user either squeezes or releases the handle grip switch Ergonomic design with a detented enable position Safety Interlock Switches Right-hinge, left-hinge, and rightangle hinge models available; switches can also be converted to operate from the opposite side Safety Scanner Two-dimensional laser scanner with easy-to-use software Programming of irregular shaped warning and detection zones 190 scanning angle with selectable resolutions (30 mm, 40 mm, 50 mm, 70 mm and 150 mm) and a 4 m or 6.25 m range 3
4 EZ-SCREEN Type 4 Type 4, Cat 4 PLe, SIL 3 Finger, hand and ankle detection 2 PNP Safety Outputs (OSSD) and 1 auxiliary output, 24 VDC power supply Defined Area Dimensions Housing 14 mm Resolution Range m 8-pin M12 QD Pair (E+R) 30 mm Resolution Range m 8-pin M12 QD Pair (E+R) 150 mm 262 mm SLSP14-150Q88 11 ms SLSP30-150Q88 9 ms 300 mm 372 mm SLSP14-300Q88 15 ms SLSP30-300Q88 11 ms 450 mm 522 mm SLSP14-450Q88 19 ms SLSP30-450Q88 13 ms 600 mm 671 mm SLSP14-600Q88 23 ms SLSP30-600Q88 15 ms 750 mm 821 mm SLSP14-750Q88 27 ms SLSP30-750Q88 17 ms 900 mm 971 mm SLSP14-900Q88 32 ms SLSP30-900Q88 19 ms 1050 mm 1120 mm SLSP Q88 36 ms SLSP Q88 21 ms 1200 mm 1270 mm SLSP Q88 40 ms SLSP Q88 23 ms 1350 mm 1420 mm SLSP Q88 43 ms SLSP Q88 25 ms 1500 mm 1569 mm SLSP Q88 48 ms SLSP Q88 27 ms 1650 mm 1719 mm SLSP Q88 52 ms SLSP Q88 30 ms 1800 mm 1869 mm SLSP Q88 56 ms SLSP Q88 32 ms 1950 mm 2018 mm / / SLSP Q88 34 ms 2100 mm 2168 mm / / SLSP Q88 36 ms 2250 mm 2318 mm / / SLSP Q88 38 ms 2400 mm 2468 mm / / SLSP Q88 40 ms s with 300 mm M12 pigtail QD also available. Emitter models with TEST function also available. Type 4 Cascadable Defined Area Dimensions Housing 14 mm Resolution Range m 8-pin M12 QD Pair (E+R) 30 mm Resolution Range m 8-pin M12 QD Pair (E+R) 300 mm 372 mm SLSCP14-300Q88 15 ms SLSCP30-300Q88 11 ms 450 mm 522 mm SLSCP14-450Q88 19 ms SLSCP30-450Q88 13 ms 600 mm 671 mm SLSCP14-600Q88 23 ms SLSCP30-600Q88 15 ms 750 mm 821 mm SLSCP14-750Q88 27 ms SLSCP30-750Q88 17 ms 900 mm 971 mm SLSCP14-900Q88 32 ms SLSCP30-900Q88 19 ms 1050 mm 1120 mm SLSCP Q88 36 ms SLSCP Q88 21 ms 1200 mm 1270 mm SLSCP Q88 40 ms SLSCP Q88 23 ms 1350 mm 1420 mm SLSCP Q88 43 ms SLSCP Q88 25 ms 1500 mm 1569 mm SLSCP Q88 48 ms SLSCP Q88 27 ms 1650 mm 1719 mm SLSCP Q88 52 ms SLSCP Q88 30 ms 1800 mm 1869 mm SLSCP Q88 56 ms SLSCP Q88 32 ms 1950 mm 2018 mm / / SLSCP Q88 34 ms 2100 mm 2168 mm / / SLSCP Q88 36 ms 2250 mm 2318 mm / / SLSCP Q88 38 ms 2400 mm 2468 mm / / SLSCP Q88 40 ms 4 Banner Engineering EMEA
5 Cordsets 8-pin M12 QD (A) 8-pin M12 QD Splitter (B) 8-pin 5 m QDE-815D No branches, no trunk CSB-M1280M m QDE-825D 15 m QDE-850D 23 m QDE-875D 30 m QDE-8100D 8-pin M12 QD Double-Ended (C) 0.3 m CSB-M1281M m CSB-M1288M m CSB-M12815M m CSB-M12825M m Flying leads CSB-UNT825M m DEE2R-81D 0.9 m DEE2R-83D 2.4 m DEE2R-88D 5 m DEE2R-815D B C 8 m DEE2R-825D 15 m DEE2R-850D 23 m DEE2R-875D 30 m DEE2R-8100D Other hookup schemes are possible: cordset A can be used individually for the E/R hookup, without splitter cables. A Interface Modules Brackets Interface Modules, 24 VDC EZA-MBK-11* EZA-MBK-12* Output Output Rating * Standard brackets included with emitter/receiver. IM-T-9A 3 NO 6 A IM-T-11A 2 NO / 1 NC 6 A Flanges in Flanges out Housing Finishes EZA-MBK-20 EZA-MBK-21** Flanges in Flanges out ** Cascadable models only. Yellow Painted Aluminium Clear Anodized Aluminium Nickel-Plated ESD 5
6 EZ-SCREEN Low Profile (LP) Type 4, Cat 4 PLe, SIL 3 Point-of-operation 2 PNP Safety Outputs (OSSD) and 1 auxiliary output, 24 VDC power supply Defined Area Dimensions Housing 14 mm Resolution Range m Integral Removable Disconnect (RD) Pair (E+R) 25 mm Resolution Range m Integral Removable Disconnect (RD) Pair (E+R) 270 mm 270 mm SLPP ms SLPP ms 410 mm 410 mm SLPP ms SLPP ms 550 mm 549 mm SLPP ms SLPP ms 690 mm 689 mm SLPP ms SLPP ms 830 mm 829 mm SLPP ms SLPP ms 970 mm 969 mm SLPP ms SLPP ms 1110 mm 1108 mm SLPP ms SLPP ms 1250 mm 1248 mm SLPP ms SLPP ms 1390 mm 1388 mm SLPP ms SLPP ms 1530 mm 1528 mm SLPP ms SLPP ms 1670 mm 1667 mm SLPP ms SLPP ms 1810 mm 1807 mm SLPP ms SLPP ms s with 8-pin M12 pigtail QD also available (add P88 behind the RD model pair number). Pigtail models come with DELPE-81D cordset pre-installed. For 8-pin M12 QD cordsets, splitter cordsets and double-ended cordsets, see page 5. Low Profile Cascadable Type 4, Cat 4 PLe, SIL 3 Point-of-operation 2 PNP Safety Outputs (OSSD) and 1 auxiliary output, 24 VDC power supply Defined Area Dimensions Housing 14 mm Resolution Range m Integral Removable Disconnect (RD) Pair (E+R) 25 mm Resolution Range m Integral Removable Disconnect (RD) Pair (E+R) 410 mm 410 mm SLPCP ms SLPCP ms 550 mm 549 mm SLPCP ms SLPCP ms 690 mm 689 mm SLPCP ms SLPCP ms 830 mm 829 mm SLPCP ms SLPCP ms 970 mm 969 mm SLPCP ms SLPCP ms 1110 mm 1108 mm SLPCP ms SLPCP ms 1250 mm 1248 mm SLPCP ms SLPCP ms 1390 mm 1388 mm SLPCP ms SLPCP ms 1530 mm 1528 mm SLPCP ms SLPCP ms 1670 mm 1667 mm SLPCP ms SLPCP ms 1810 mm 1807 mm SLPCP ms SLPCP ms s with 8-pin M12 pigtail QD also available (add P88 behind the RD model pair number). Pigtail models come with DELPE-81D cordset pre-installed. For 8-pin M12 QD cordsets, splitter cordsets and double-ended cordsets, see page 5. 6 Banner Engineering EMEA
7 Cordsets For Cascadables 8-wire RD (Removable disconnect) 5 m RDLP-815D 8 m RDLP-825D 15 m RDLP-850D 23 m RDLP-875D 30 m RDLP-8100D 8-pin RD (male) to M12 QD 0.3 m DELPE-81D 0.9 m DELPE-83D 2.4 m DELPE-88D 5 m DELPE-815D 8 m DELPE-825D 15 m DELPE-850D 23 m DELPE-875D RD to RD Cascade 5 cm DELP-110E / RD to M12 Female* QD 0.3 m DELP-111E DELPEF-81D 0.9 m DELP-113E DELPEF-83D 2.4 m DELP-118E DELFEF-88D 5 m DELP-1115E DELPEF-815D 8 m DELP-1125E / 15 m DELP-1150E / 23 m DELP-1175E / 30 m DELP-11100E / * Can be used with DEE2R-8xxD. For Cascadables LPA-MBK-21 LPA-MBK-90 LPA-MBK m DELPE-8100D For 8-pin M12 QD cordsets, splitter cordsets and double-ended cordsets, see page 5. Interface Modules Interface Modules, 24 VDC LPA-MBK-135 LPA-MBK-180 Output Output Rating IM-T-9A 3 NO 6 A IM-T-11A 2 NO / 1 NC 6 A Brackets LPA-MBK-11* LPA-MBK-12* LPA-MBK-20 Housing Finishes Flanges in Flanges out * Standard brackets included with emitter/receiver. Yellow Painted Aluminium Clear Anodized Aluminium Nickel-Plated ESD 7
8 EZ-SCREEN Low Profile with Muting (LPM) Type 4, Cat 4 Ple, SIL 3 Integral muting 2 PNP Safety Outputs (OSSD), 2 muting inputs, additional inputs for configuration of the muting function, 1 auxiliary output, 24 VDC power supply Defined Area Dimensions Housing 14 mm Resolution Range m 12-pin M12 pigtail QD Pair (E+R) 25 mm Resolution Range m 12-pin M12 pigtail QD Pair (E+R) 410 mm 410 mm SLPMP14-410P ms SLPMP25-410P ms 550 mm 549 mm SLPMP14-550P ms SLPMP25-550P ms 690 mm 689 mm SLPMP14-690P ms SLPMP25-690P ms 830 mm 829 mm SLPMP14-830P ms SLPMP25-830P ms 970 mm 969 mm SLPMP14-970P ms SLPMP25-970P ms 1110 mm 1108 mm SLPMP P ms SLPMP P ms 1250 mm 1248 mm SLPMP P ms SLPMP P ms 1390 mm 1388 mm SLPMP P ms SLPMP P ms 1530 mm 1528 mm SLPMP P ms SLPMP P ms 1670 mm 1667 mm SLPMP P ms SLPMP P ms 1810 mm 1807 mm SLPMP P ms SLPMP P ms s with integral Removable Disconnect (RD) also available. Cordsets Muting Splitter Cordsets (D) 3-Branch Sensor (PNP) CSM3DO-M12121FM12121M DO (pin 2) CSM3LO-M12121FM12121M LO (pin 4) 4-Branch (Emitter Hookup) Sensor (PNP) CSM4DO-M12121FM12121M DO (pin 2) A) Pre-installed DELPE-121E B) QDE-12xxE C) DEE2R-8xxD see page 5 Other hookup schemes are possible. A CSM4LO-M12121FM12121M LO (pin 4) Muting Sensor Cordsets (E) D C 0.3 m DEE2R-51D 1 m DEE2R-53D 2.5 m DEE2R-58D B 4.5 m DEE2R-815D Muting Indicators EZ-LIGHT Muting Indicators Colours TL50WQ 1: White E Cordsets & brackets for EZ-LIGHT Muting Indicators Description LPA-MBK-15 bracket DELPEF-40D Single colour cordset, 5 cm used with DELPEF-x0D TL50GYRWQ K50LGRW2PQ : Green/Yellow/Red/White 3: Green/Red/White DELPEF-50D Multi-colour cordset, 5 cm 8 Banner Engineering EMEA
9 EZ-SCREEN Type 2 Type 2, Cat 2 PLd, SIL 2 Hand and ankle detection suited to lower risk applications 2 PNP Safety Outputs (OSSD), 24 VDC power supply 30 mm Resolution Range 15 m, 8-pin M12 QD, E+R pair listed Defined Area Housing Automatic Restart Trip Manual Restart Latch 150 mm 215 mm 11 ms LS2TP30-150Q88 LS2LP30-150Q mm 365 mm 13 ms LS2TP30-300Q88 LS2LP30-300Q mm 515 mm 14 ms LS2TP30-450Q88 LS2LP30-450Q mm 665 mm 16 ms LS2TP30-600Q88 LS2LP30-600Q mm 815 mm 17 ms LS2TP30-750Q88 LS2LP30-750Q mm 964 mm 19 ms LS2TP30-900Q88 LS2LP30-900Q mm 1114 mm 21 ms LS2TP Q88 LS2LP Q mm 1264 mm 22 ms LS2TP Q88 LS2LP Q mm 1414 mm 24 ms LS2TP Q88 LS2LP Q mm 1563 mm 25 ms LS2TP Q88 LS2LP Q mm 1713 mm 27 ms LS2TP Q88 LS2LP Q mm 1863 mm 29 ms LS2TP Q88 LS2LP Q88 Cordsets Brackets 8-pin M12 QD 5 m QDE-815D 8 m QDE-825D 15 m QDE-850D USCMB-.. USMB-1* * Standard bracket included with emitter/receiver. 23 m QDE-875D 30 m QDE-8100D 8-pin M12 QD Double-Ended 0.3 m DEE2R-81D 0.9 m DEE2R-83D 2.4 m DEE2R-88D 5 m DEE2R-815D Flanges in Flanges out 8 m DEE2R-825D 15 m DEE2R-850D 23 m DEE2R-875D 30 m DEE2R-8100D USMB-6 USMB-8 8-pin M12 QD Splitter No branches, no trunk CSB-M1280M m CSB-M1281M m CSB-M1288M m CSB-M12815M m CSB-M12825M m Flying leads CSB-UNT825M1281 Flanges in Flanges out 9
10 AG4 Safety Laser Scanner Type 3, Cat 3 PLd, SIL 2 Stationary and mobile applications 2 PNP Safety Outputs (OSSD), 2 PNP auxiliary outputs, 24 VDC power supply Resolution Protective Fields Warning Field Scanning Angle 30 mm 1.6 m AG4-4E 40 mm 2.2 m 50 mm 2.8 m 70 mm 4.0 m 15 m (150 mm resolution) ms (default) adjustable to 640 ms 150 mm 4.0 m 30 mm 1.6 m AG4-6E 40 mm 2.2 m 50 mm 2.8 m 70 mm 6.25 m 15 m (150 mm resolution) ms (default) adjustable to 640 ms 150 mm 6.25 m Includes scanner, plugs and CD with diagnostic and configuration software, cordset ordered separately. Cordsets Interface Modules DB15 Machine Interface 5.00 m AG4-CPD m AG4-CPD m AG4-CPD m AG4-CPD15-50 DB9 PC Communication Brackets Universal safety input, 24 VDC Output UM-FA-9A 3 NO 6 A UM-FA-11A 2 NO / 1 NC 7 A AG4-MBK1 Output Rating 3.00 m AG4-PCD m AG4-PCD m AG4-PCD9-10 RS-232 Serial Protocol. DB9 to USB Test & Clone Box 1.00 m AG4-PCD9USB-1 Not recommended for use with AG4-PCD9-10. Test & Clone Box - No Configuration AG4-TB1 10 Banner Engineering EMEA
11 SC22-3 / -3E S afety Co ntroller Cat 4 PLe, SIL 3 Safety Controller 22 input terminals for monitoring safe and non-safety devices, 3 redundant safety outputs (6 PNP 3 pairs), 10 status outputs, programmable via PC with Ethernet/IP and Modbus/TCP communication, 24 VDC power supply Terminal Type USB Cable Output Rating Status Outputs Communication Protocol SC22-3-SU1 Screw 1.8 m SC22-3-CU1 Clamp 1.8 m SC22-3-S Screw 0.75 A each output 10 single PNP configurable / SC22-3-C Clamp SC22-3E-SU1 Screw 1.8 m SC22-3E-CU1 Clamp 1.8 m SC22-3E-S Screw 0.5 A each output 10 single PNP configurable plus 32 virtual EtherNet/IP & Modbus TCP SC22-3E-C Clamp XM card available for all models. SU1 and CU1 models have XM programming tool. SC22-3 & SC22-3E Interface Modules 24 VDC power supply (controller supplied) Inputs (SC Outputs) Safety Outputs Output rating Description SC-IM9A 2 (SO1) 3 NO 10 A For use with 1-dual channel SC22-3 safety output SC-IM9B 4 (SO1 and SO2) Total of 6 (3 NO per output) 10 A For use with 2-dual channel SC22-3 safety outputs SC-IM9C 6 (SO1, SO2 and SO3) Total of 9 (3 NO per output) 10 A For use with 3-dual channel SC22-3 safety outputs IM-T-9A 2 (SOx) 3 NO 6 A IM-T-11A 2 (SOx) 2 N O / 1 N C 6 A For use with 1-dual channel SC22-3 safety output External device monitoring (EDM) is required to be wired separately to the NC contacts to comply with ISO Accessories Cordsets Safety Controller Accessories Ethernet Communication Description Shielded Shielded Crossover SC-XM1 SC-XM1-5 SC-USB1 SC-XMP External memory card (XM card) Bulk pack of 5 XM cards USB A/B cable 1.8 m XM card USB programming tool 2 m STP07 STPX07 8 m STP25 STPX25 15 m STP50 STPX50 23 m STP75 STPX75 11
12 STB Self-Checking Touch Buttons STB Self-Checking Touch Buttons Connection Upper Housing* Output Power Supply STBVP6 STBVP6Q5 2 m cable 4-pin M12 QD Polysulfone Solid-state 2 Complementary PNP (1 ON, 1 OFF) VDC STBVR81 STBVR81Q6 2 m cable 5-pin M12 QD Polysulfone E/M Relay 2 Complementary SPST (1 NC, 1 NO) VAC/DC To comply to safety standards, STB buttons must be used with DUO-TOUCH SG Two-Hand control modules, SC Safety Controller or Type IIIC Two-Hand system. *s with polycarbonate upper housing also available. Brackets SMBAMS30P SMBAMS30RA SMB30SC Run Bar DUO-TOUCH Run Bar with STBVP6 Ergonomic design for reduced wrist, hand and arm stress Connection E-Stop STBVP6-RB2 Terminal strip Not included STBVP6-RB2Q8 8-pin 7/8 QD Not included STBVP6-RB2E02 Terminal strip SSA-EBM-02L Brackets & Stands Cordsets STBs Brackets for Run Bars STBA-RB2-MB1 STBA-RB2-MB2 STBA-RB2-MB3 4-pin threaded M12 QD to flying leads Straight Right-Angle 2 m MQDC-406 MQDC-406RA 5 m MQDC-415 MQDC-415RA 9 m MQDC-430 MQDC-430RA 15 m MQDC-450 MQDC-450RA 5-pin threaded M12 QD to flying leads 2 m MQDC1-506 MQDC1-506RA 5 m MQDC1-515 MQDC1-515RA 9 m MQDC1-530 MQDC1-530RA Cordsets Run Bar Telescoping stands for Run Bars STBA-RB2-S1 STBA-RB2-S2 8-pin 7/8 QD to flying leads 4.5 m QDS-815C 8 m QDS-825C 15 m QDS-850C 23 m QDS-875C Run Bars are sold separately. 12 Banner Engineering EMEA
13 30 mm Mount E-Stop Buttons 30 mm Mount Electro-Mechanical E-Stop Push Button, IP65 rating Connection E-Stop Contacts Illuminated Base SSA-EB1P-02ECQ4 4-pin M12 QD 2 NC / SSA-EB1P-11ECQ4 4-pin M12 QD 1 NO / 1 NC / SSA-EB1P-22ECQ8 8-pin M12 QD 2 NO / 2 NC / SSA-EB1PLYR-12ECQ8 8-pin M12 QD 1 NO (PNP)/ 2 NC Yellow & Red (Flashing/Solid) SSA-EB1PLGR-12ECQ8 8-pin M12 QD 1 NO (PNP)/ 2 NC Green & Red (Flashing/Solid) SSA-EB1PLXR-12ECQ8 8-pin M12 QD 1 NO (PNP)/ 2 NC Red (Flashing/Solid) SSA-EB1PL-12ECQ8 8-pin M12 QD 1 NO (PNP)/ 2 NC Red (Solid/Solid) AB/Rockwell and Siemens Safety BUS node compatible models also available. Flush Mount E-Stop Buttons Flush Mount Electro-Mechanical E-Stop Push Button, IP65 rating Standard Actuator Lockable Actuator E-Stop Contacts Connection SSA-EB1P-02ED1Q4 SSA-EB1MP-02ED1Q4 2 NC 4-pin M12 QD SSA-EB1P-11ED1Q4 SSA-EB1MP-11ED1Q4 1 N O / 1 N C 4-pin M12 QD SSA-EB1P-22ED1Q8 SSA-EB1MP-22ED1Q8 2 N O / 2 N C 8-pin M12 QD SSA-EB1PL2-12ED1Q8 SSA-EB1ML2P-12ED1Q8 1 NO / 2 NC Illuminated button (Push ON) 8-pin M12 QD Illuminated-base, with 1 NO (PNP)/ 2 NC E-Stop Contacts, IP65 rating, 8-pin M12 QD Standard Actuator Lockable Actuator Illuminated Base SSA-EB1PLXR-12ED1Q8 SSA-EB1MLXRP-12ED1Q8 OFF & RED (Flashing/Solid) SSA-EB1PLYR-12ED1Q8 SSA-EB1MLYRP-12ED1Q8 YELLOW & RED (Flashing/Solid) SSA-EB1PL-12ED1Q8 SSA-EB1MLP-12ED1Q8 OFF & RED (Solid/Solid) SSA-EB1PLGR-12ED1Q8 SSA-EB1MLGRP-12ED1Q8 GREEN & RED (Flashing/Solid) AB/Rockwell and Siemens Safety BUS node compatible models also available. Cordsets M12 QD Description Pin 0.3 m length 2.5 m length A) Doubleended M12 5-pin* DEE2R-51D DEE2R-58D 8-pin DEE2R-81D DEE2R-88D Description Pin B) Splitter 2 (F) M (M) M12 4-pin 8-pin 4-pin 8-pin 0.3 m 2.5 m CSS-M12F41M12M41M12F41 CSS-M12F81M12M81M12F81 CSS-M12F48M12M41M12F41 CSS-M12F88M12M81M12F81 Description Pin 2 m length 4.5 m length A B C C) Single ended flying leads 4-pin MQDC-406 MQDC pin MQDC2S-806 MQDC2S-815 * Use also with 4-pin E-Stop buttons. Other hookup schemes are possible. More lengths available. 13
14 2-Hand-Control Modules DUO-TOUCH SG Two-Hand Control Modules 2 NO Safety Outputs, 24 VAC/DC power supply, IP20 rating, meets Cat 4 and Type IIIC Inputs Output Rating Terminals AT-FM-10K 2 STB* 6 A Removable * May also use 2 mechanical push buttons, each with 1 NO and 1 NC contact. DUO-TOUCH SG Kits with STB Touch Buttons 2 NO Safety Outputs, no auxiliary outputs, 24 VAC/DC power supply, meets Cat 4 and Type IIIC Kit Module IP Rating STB Buttons (2 pieces) IP Rating Connection ATK-VP6 AT-FM-10K IP20 STBVP6 IP66 2 m cable ATK-VP6Q5 AT-FM-10K IP20 STBVP6Q5 IP66 4-pin M12 QD Kit does not include run bar nor E-Stop module. E-Stop, Muting & Safe Speed Modules E-Stop & Interlocked Guard Modules Muting Modules Safe Speed Monitoring Modules Monitors contact failure or wiring fault Self-monitors to eliminate risk if module fails Installs easily Suspends safeguarding during hazardfree times in the machine s cycle Allows material to move into or from the process, without tripping the primary safeguard Monitors two or four hard-relay contact safety devices Monitors two sensors with PNP outputs for rotation and linear movements Allows safety switches to release and safety gates to be opened when the speed drops below the dangerous level Suitable for Standstill /Under-speed and Over-speed detection with selectable RPM ranges 14 Banner Engineering EMEA
15 ED1G Enabling Devices 3-position switches for enabling and hold-to-run applications, IP65 rating Contact Configuration Momentary Push Button ED9Z-GH1 Bracket ED1G-L21SM-1N 2 NO & 1 NC Aux / ED1G-L21SMB-1N 2 NO & 1 NC Aux 1 NO ED1G-L20MB-1N 2 NO 2 NO Interlocking Switches Magnet Style Switches Hinge Style Switches Compact Plastic Switches Magnet switches for non-contact applications Compact, 3-piece non-contact system Sealed to resist water and dirt Designed to resist intentional defeat Load-bearing, lever and rotating hinge styles Adjustable range of operation One-piece switches Designed to minimize tampering Five actuator types Actuator engagement from different locations Compact Metal Switches Locking Style Switches Rigid and flexible in-line actuators Rotating actuator heads Two options for locking mechanisms Two models for different voltages Rigid and flexible in-line actuators Rotating actuator heads 15
16 Sensors Vision Wireless I/O Lighting & Indicators Machine Safety Presence/Absence Detection Foreground & Background Suppression GO/NO GO Inspection Gating and Triggering Parts Counting Level and Distance Measurement Positioning Contrast and Colour Sensing Vehicle Detection (Radar, Ultra sonic & Magnetic Technology) Vision Sensors with Onboard User Interface Pattern Recognition Traceability (Barcode, Datamatrix and Text Reading) OCR/OCV Complex Part Inspection Part Orientation Assembly Verification Colour Inspections Slip Ring Replacement Tank Farm Monitoring Livestock Environmental Monitoring Water and Wastewater Treatment HVAC Remote Monitoring Traffic Monitoring & Control Remote Sensing in Process Automation Cable Replacement ATEX Approved Solutions Bin & Part Picking Error/Mistake Proofing Pick-to-Light & Put-to- Light Operator Guidance Call for Parts Incorrect Pick Signal Remote Start/Stop Indication Work Station Lighting Mobile Equipment Work Lights Production Machine and Cabinet Lighting Safety Light Screens Ergonomic Two-Hand Control Devices Safety Modules Emergency Stop Devices Safety Interlocking Laser Scanners for Safety Applications Programmable Safety Controllers Enabling Devices Banner Engineering's Worldwide Presence Headquarters USA Banner Engineering th Avenue North Minneapolis, Minnesota USA Fax: China Banner Engineering Int'L inc. (China) Shanghai Rep. Xinlian Scientific Research Building: Level 12, Building 2, 1535 Hongmei Road, Shanghai Japan Banner Engineering Japan Cent-Urban Building Nishi-Nakajima Yodogawa-Ku, Osaka [email protected] Taiwan Banner Engineering Int l Incorporated Taiwan Rep. Office 8F-2, No. 308, Sec. 1, Neihu Rd. Taipei #15 [email protected] EU, Middle East, Africa Banner Engineering EMEA Park Lane, Culliganlaan 2F 1831 Diegem Belgium +32 (2) Fax +32 (2) [email protected] India Banner Engineering India Pune (HQ) Office No. 1001, 10th Floor Sai Capital, Opp. ICC Senapati Bapat Road, Pune [email protected] Mexico Banner Engineering de Mexico Edificio VAO Av. David Alfaro Siqueiros No.103 Col. Valle Oriente C.P San Pedro Garza Garcia, Nuevo Leon [email protected] Turkey Banner Engineering Elk. San. Ve Tic. Ltd. Sti. Barbaros Mah. Uphill Court Towers A Blk D: Atasehir Istanbul Fax: (+90) [email protected] SENSORS VISION WIRELESS I/O LIGHTING & INDICATORS SAFETY Banner offers a full range of sensing solutions EN F142 Rev A - NOV 2012
Wireless Solutions for Environmental Monitoring and Process
Wireless Solutions for Environmental Monitoring and Process Solutions for Waste Management Landfill Leachate removal from a landfill well is a primary requirement. Although different types of pumps are
Solutions for the Automotive Industry
Solutions for the Automotive Industry Intelligent Solutions for Complex Processes Powertrain Casting of engines and transmissions Machining Heat treatment Assembly and test Material handling General Assembly
Wireless Solutions for the Oil & Gas Industry
Wireless Solutions for the Oil & Gas Industry Wireless I/O FAQ Cable Replacement How reliable is the communication? Good signal strength assures uninterrupted communication. Before actual system installation,
Multizone Application 1 2-3 >3. MSR300 System. No Software configurable? GuardPLC. Enet RECOMMENDED PRODUCTS. Time Delay MSR138
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected] Selection Flowchart Multizone Application General
Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
CONFIGURABLE SAFETY RELAYS
MSI-s/R, MSI-sx/Rx Configurable MSI provide important functions for the efficient flow of automated production processes Special features Combined guarding types by connecting up to 4 AOPDs Additional
Safeguarding Applications and Wiring Diagrams
Table of Contents Safeguarding and Wiring Diagrams General Application Selection Table 0- Notes for Use with Application Circuit Examples 0- Safeguarding and Wiring Diagrams 0- Light Curtain Point of Operation
SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
g9sp Programmable Safety controllers compact Stand-Alone Programmable controller NEW! example of System configuration G9SP
Programmable Safety controllers g9sp G9SP compact Stand-Alone Programmable controller Stand-alone safety controller for small and mid-sized machinery Easy programming for complex safety control Three types
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F The OVR three-phase recloser style guide aids in the proper selection of your OVR three-phase style number.
SDN INSTRUCTIONS 07/10, Ver 1.2. Somfy Digital Network (SDN) Installation and Programming
Somfy Digital Network (SDN) Installation and Programming SSoomffyy SSyysst teemss IInncc.. 1 Table of Contents 1 General Information and Features... 3 1.1 ILT2 Motor... 3 1.2 SDN Switches... 4 1.3 ILT2
General 1-2-Opto-electronics Safety Switches 4-Emergency
General 1-2-Opto-electronics Safety Switches 4-Emergency Logic Power The Lifeline 4 cable/push button operated system can be installed along or around awkward machinery such as conveyors and provide a
Industrial Bar Code Scanners
DS4800 Industrial Bar Code Scanners Enhanced Connectivity Ease of use Configuration SW Tool ACR4 technology Smart focus adjustment APPLICATIONS Automated warehousing Reading on pallets Picking systems
Safety Relay Units. G9SR family. Diagnosis with LEDs Selectable operating modes and times Increased extension possibilities. industrial.omron.
Safety Relay Units G9SR family Diagnosis with LEDs Selectable operating modes and times Increased extension possibilities industrial.omron.eu/g9sr ... A complete standalone Safety Relay Unit family - G9SR
Smart Sensing Solutions Since 1954
Smart Sensing Solutions Since 1954 X-tremely High Speed Photoelectric Registration Sensor 800-237-0946 ttco.com 813-886-4000 Photoelectric Registration Sensor The SMARTEYE X-MARK TM is the fastest, most
FACTORY AUTOMATION LGS SERIES INTELLIGENT
FACTORY AUTOMATION LGS Series INTELLIGENT light Grid A LIGHT GRID WITH THE RIGHT TOUCH Lightning fast, adaptable, and cost-effective, the new LGS series light grids open the door to a wider range of detection
Fiessler Programmable Safety Center. Flexible Hard- and Software concept. Available with a safe bus system or/and two counter inputs
E L E K T R O N I K Appliance Description Programmable safety center FPSC Fiessler Programmable Safety Center Flexible Hard- and Software concept Available with a safe bus system or/and two counter inputs
Manual for Fire Suppression & Methane Detection System
Manual for Fire Suppression & Methane Detection System Fogmaker North America Post address: 150 Gordon Dr Exton, PA 19341 Delivery address: 150 Gordon Dr Exton, PA 19341 Tel: 610-265-3610 Fax: 610-265-8327
FACTORY AUTOMATION LASER BARCODE SCANNERS FOR INDUSTRIAL AUTOMATION
FACTORY AUTOMATION LASER BARCODE SCANNERS FOR INDUSTRIAL AUTOMATION Fixed Mount Laser Barcode Scanners Reading Angle Tilt Angle Pitch Angle Rotational Angle As the width of the barcode increases, Results
5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual
5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel...
XUSL4E4BB091NS2 XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm
Characteristics XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm Complementary Detection system Kit composition [EAA] effective aperture angle Emission Main Range of product Product or
Application Technique. Safety Function: Magnetic Door Switch Monitoring
Application Technique Safety Function: Magnetic Door Switch Monitoring Products: MC1 Magnetically-coded Door Switch, Guardmaster Dual-input Safety Relay Safety Rating: CAT. 3, PLd to EN ISO 13849-1: 2008
Set for Profibus DPV1 in IP20 TI-BL20-DPV1-8
Type code Ident no. 1545007 Number of channels 8 Dimensions (W x L x H) 110.3 x 128.9 x 74.4 mm Cable max. 50 m between interface and read/write head 2 decimal rotary coding switches for the adjustment
CONFIGURABLE SAFETY RELAYS
MSI-m/R, MSI-mx/Rx Configurable MSI Safety Relay with function for efficient material flow in a packaging application Special features Sequential or Parallel with automatic mode detection MSI-mx for separate
Installation manual. Version 1.1. www.videx-security.com
Installation manual Version 1.1 www.videx-security.com 2 Table of Contents MANUAL INTRODUCTION... 4 SYSTEM INTRODUCTION... 4 SYSTEM COMPONENTS... 5 CONTROLS... 6 3.5A 13.8Vdc PSU... 6 CONTROL PCB... 6
Machine Safety Switches
Machine Switches SI-LS31H Series 31 mm Limit-Switch-Style with Hinged Lever Actuators Features Limit switch design (EN 50047) For use on doors or flaps Positive opening safety contacts (IEC 60947-5-1)
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
Product Specification instalert Rapid Messenger Variable Message Sign
instalert 2 units to cover any application instalert 18 (ia18): 18 x 28 full matrix instalert 24: (ia24): 24 x 60 full matrix Size, Weight without battery ia18: 30 x 20 x 2.74, 29 lbs ia24: Folds to fits
Product Profile Machine Safety - Jokab Safety products
Product Profile Machine Safety - Jokab Safety products Machine safety We develop innovative products and solutions for machine safety We make it simple to build safety systems. Developing innovative products
LED...A70..4-..Q Series Sealed High-Intensity
LED...A70..4-..Q Series Sealed High-Intensity Area Lights High-Power Lighting for use with PresencePLUS and Other Vision Systems Features Rugged, waterproof housing, rated IEC IP68 Compact area light for
Safety at injection moulding machines
Safety at injection moulding machines HSE information sheet Plastics Processing Sheet No 4 (Revision 1) Introduction This information sheet is one of a series produced by HSE s manufacturing sector and
Solutions for E-Mobility
Solutions for E-Mobility Qatar PHOENIX CONTACT in dialog with customers and partners worldwide Phoenix Contact is a worldwide market leader in the field of electrical engineering, electronics, and automation.
Conventional Fire Detection and Extinguishant Control System Specification
Conventional Fire Detection and Extinguishant Control System Specification Page 1 of 9 Scope Furnish a complete 24VDC Conventional, electrically supervised, combined fire detection and extinguishant release
Bar code scanners CLV45x / CLV450 / Standard Density
ONLINE DATA SHEET www.mysick.com Bar code scanners CLV45x / CLV450 / Standard Density CLV450-0010 Bar code scanners CLV45x / CLV450 / Standard Density Model Name > CLV450-0010 Part No. > 1018556 At a glance
OVR-3SP Recloser with PCD Control Style Guide 1VAL263901-SG March 30, 2009 Revision B
OVR-3SP Recloser with PCD Control Style Guide 1VAL263901-SG March 30, 2009 Revision B The OVR-3SP three-phase recloser style guide aids in the proper selection of your OVR-3SP style number. The OVR-3SP
DASHBOARD SOFTWARE Ver 1.2.2
POCKET USER GUIDE DASHBOARD SOFTWARE Ver 1.2.2 1 Thank you for purchasing the ASK Controls GPRS Quad Switch, it represents the very latest in remote switching technology to allow control of multiple circuits,
LS1024B / LS2024B/ LS3024B. Solar Charge Controller USER MANUAL
EPSOLAR LS1024B / LS2024B/ LS3024B Solar Charge Controller USER MANUAL Thank you very much for selecting our product! This manual offers important information and suggestions with respect to installation,
Intelligent Vibration Monitoring
Diagnostic Systems Condition Based Monitoring Diagnostic Systems Condition Based Monitoring Intelligent Vibration Monitoring efector Octavis for real-time vibration monitoring Solutions for Predictive
Zlinx Wireless I/O. Peer-to-Peer and Modbus I/O B&B ELECTRONICS PRODUCT INFORMATION
Modular, Customizable Wire Replacement 128 / 256 Bit AES Encryption Software Selectable RF Transmit Power Software Selectable Over-the-air Data Rate Modbus ASCII /RTU Compatible Wide Operating Temperature
NEW. EVEN MORE data acquisition and test stand automation
NEW EVEN MORE data acquisition and test stand automation the new class of data The plug&play complete package User benefits Expert Series is the latest generation of data acquisition Complete hardware
Bourns Rotary Encoders. Short Form Brochure Revision 2
Bourns Rotary Encoders Short Form Brochure Revision 2 Introduction Bourns Sensors and Controls Division has continued to expand its encoder product offering with a wide variety of models to support our
Programmable set for Ethernet Modbus/TCP in IP20 TI-BL20-PG-EN-8
CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps LEDs for display of supply voltage, group and bus errors as well as status and diagnostics Connection
WIRING HARNESS FOR AS635P4. BLUE PLUG RED, BLUE, BLACK, WHITE - Plug in dual stage sensor harness
WIRING HARNESS FOR AS635P4 ANTENNA NOT USED 5 PIN WHITE PLUG 2 PIN WHITE PLUG GREEN - PARKING BRAKE INPUT (-) BLUE - NOT USED 3 PIN BLUE PLUG RED, BLUE, BLACK, WHITE - Plug in dual stage sensor harness
CLV440/442 Bar Code Scanner
PRODUCT INFORMATION CLV440/442 Bar Code Scanner Advanced line CLV440/442 Bar Code Scanner: Dynamic focus control Compact but powerful The bar code scanners CLV440/442 represent the newest members of our
Safety Light Curtains. We make safety easy.
Safety Light Curtains. We make safety easy. When Safety Matters, We ve got you covered. TR Electronic is an industry leader in manufacturing and supporting a complete line of absolute rotary encoders,
Compact multiprotocol I/O module for Ethernet 8 digital PNP inputs and 8 digital PNP outputs 2 A TBEN-L1-8DIP-8DOP
EtherNet/IP, Modbus TCP, or PROFINET slave Integrated Ethernet switch Supports 10 Mbps/100 Mbps 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection 7/8" males, 5-pin, for power supply Separated power
SAFETY LIGHT CURTAINS
SAFETY LIGHT CURTAINS Overview Safety Light Curtains with resolutions that can be reduced guarantee protection and tolerate work equipment in the protective field The Safety Light Curtains comply with
JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
MRC High Resolution. MR-compatible digital HD video camera. User manual
MRC High Resolution MR-compatible digital HD video camera User manual page 1 of 12 Contents 1. Intended use...2 2. System components...3 3. Video camera and lens...4 4. Interface...4 5. Installation...5
WxGoos-1 Climate Monitor Installation Instructions Page 1. Connections. Setting an IP Address
Instructions Page 1 Connections The WxGoos-1 is a self-contained web server and requires 6vdc of power at 300ma. A center-positive 2.1 mm plug is used. There are five ports: 1. 10/100 Ethernet RJ-45 receptacle
FIRE ALARM SYSTEM TECHNICAL SPECIFICATIONS Page 1 of 10
TECHNICAL SPECIFICATIONS Page 1 of 10 FIRE DETECTION AND ALARM SYSTEM Scope Furnish a complete 24V DC conventional, electrically supervised, zone annunciated, fire detection and alarm system as specified
User manual Compact Web PLC WP240 series IEC-line
User manual Compact Web PLC WP240 series IEC-line update: 09-01-2014 IEC-line by OVERDIGIT overdigit.com 1. General description The WP240 device is a PLC, programmable in IEC61131-3 language using CoDeSys
TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL
TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL w w w. c d v g r o u p. c o m CA-ETHR-A: TCP/IP Module Installation Manual Page Table of Contents Introduction...5 Hardware Components... 6 Technical Specifications...
Machine Safety Switch: SI-LM40 Series Limit Switch Style
Machine Switch: SI-LM40 Series Limit Switch Style SI-LM40 Series Limit Switch Style with Flexible In-Line Actuator Positive-opening safety contacts (IEC 60947-5-1) (not dependent upon springs) Standard
Smile 11 AS-i Emergency stop with safe AS-i input node
Original instructions Smile 11 AS-i Emergency stop with safe AS-i input node SAFETY AT WORK ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand
Broadway 3D Security System
Broadway 3D Security System USER MANUAL v.1.1.0 Artec Group, Inc. 2012 Table of contents 1. General Information... 3 2. Delivery Package... 4 3.1. B3D BR... 5 3.2. B3D B... 6 3.3. B3D BM... 7 4. Integration
SWISS MADE. Series 320 XB MASTER. Analytical. Precision
SWISS MADE MASTER Series Analytical Precision MASTER Series The Precisa 320 high performance series combines precision and quality, and offers the highest metrological performance and advanced integrated
SMART CAMERA SENSORS SMART CAMERA SENSOR FOR VISUAL INSPECTION AND IDENTIFICATION
SMART CAMERA SENSOR FOR VISUAL INSPECTION AND IDENTIFICATION SMART CAMERA SENSORS Cost-effective High performances CMOS 640x480 image sensor Digital I/O RS3 or RS485 Ethernet port for external PC configuration
Elvey is a leading distributor of electronic security equipment in Africa. Our vision is to assist in the protection of people and property by
Elvey is a leading distributor of electronic security equipment in Africa. Our vision is to assist in the protection of people and property by providing quality, innovative products and solutions to the
Quick Installation. A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding. Quick Installation
Quick Installation A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding This chapter intends to get your new FuzzyScan scanner working with your existing system within minutes. General instructions
Material Handling Solutions Shipping 13 Full Tote Indication and Verification Operators touch ergonomic K50 touch buttons to acknowledge a tote is full in the small package sorter area. 14 Wireless Forklift
GTR-128/GTR-129 Motorcycle/ Vehicle Tracker Quick Start Guide
GTR-128/GTR-129 Motorcycle/ Vehicle Tracker Quick Start Guide GlobalSat WorldCom Corporation 16F., No. 186, Jian 1 st Rd, Zhonghe Dist., New Taipei City 23553, Taiwan Tel: 886.2.8226.3799/ Fax: 886.2.8226.3899
INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 [email protected] in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
Collision Prevention and Area Monitoring with the LMS Laser Measurement System
Collision Prevention and Area Monitoring with the LMS Laser Measurement System PDF processed with CutePDF evaluation edition www.cutepdf.com A v o i d...... collisions SICK Laser Measurement Systems are
Safety Function: Door Monitoring
Application Technique Safety Function: Door Monitoring Products: Trojan 5 Switch, GuardLogix Controller Safety Rating: CAT. 3, PLd to ISO 13849-1: 2008 Topic Page Important User Information 2 General Safety
Industrial Bar Code Scanners
DX8200A Industrial Bar Code Scanners Configuration SW Tool ACR4 technology PackTrack ASTRA technology APPLICATIONS Postal/Courier parcel sorting and tracking Automated warehousing identification systems
S3000 Quick-Start. The document describes the schedule of a configuration which is valid for the user software CDS 3.xx or higher.
The present document S3000 Quickstart does not replace a detailed study of the operating manual provided with the Safety Laser Scanner S3000. Please read the operating manual carefully before you handle
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
HT580 User Reference Guide. Version 1.0
Version 1.0 NOTICE 1. Li-Ion Battery Pack The HT580 Portable Terminal and the Li-Ion Battery Pack are packaged separately. You will have to install the Battery Pack when you receive your terminal. Please
VISION. Data VS2 DATAVS2
DATAVS2 The DataVS2 vision sensor series presents all the characteristics to solve machine vision applications in a flexible and intuitive way. DataVS2 is a completely embedded device: the optic, the LED
Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
3 3RG78 45 program overview
Overview RG78 45 light curtains and arrays with integrated processing unit for type 4 in accordance with IEC/EN 61496 With "Standard" function package Resolutions: 14, 0, 50, and 90 Protective zone height:
LED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6
L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution
Industrial Bar Code Scanners
DS6400 Industrial Bar Code Scanners Configuration SW Tool ACR4 technology PackTrack APPLICATIONS Automated warehousing Medium conveyor sorting Reading on forklift trucks Picking systems Automated shop
Routers and machining centres
Routers and machining centres Safe working practices HSE information sheet Introduction This information sheet gives practical guidance on safe working practices when using CNC routers and machining centres,
EQUIPMENT SPECIFICATIONS
EQUIPMENT SPECIFICATIONS IC-1600 Intelligent Controller The IC-1600 Intelligent Controller is a fully intelligent panel that has a complete database on board. It operates in conjunction with the Access
MINIMAT-EC-Servo Screwdriver Spindles
Screwdriving technology Automation Air motors Air tools Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum Flexibility and process Control Straight Spindle Form - Torque range
Set for PROFINET IO in IP20 TI-BL20-EN-PN-4
Cable max. 50 m between interface and read/write head Connection of up to 4 read/write heads via BL ident extension cables Mixed operation of HF and UHF read/ write heads Connectors /S2500 Type code Ident
C441 series communication modules Accessories for electronic overload relays and soft starters. Monitoring and control made simple
C441 series communication modules Accessories for electronic overload relays and soft starters Monitoring and control made simple Monitoring and control made simple C441 series communication modules Eaton
TrueAlarm Fire Alarm Systems
TrueAlarm Systems UL, ULC, CSFM Listed; FM Approved* Network Annunciators; es Features Provides a dedicated local area network (LAN) for connection of a TrueSite workstation server to remote clients: es
INSTALLATION MANUAL XM3 Reader
INSTALLATION MANUAL XM3 Reader Conditions Transactions, deliveries et cetera will be according to the general terms of delivery as deposited at the Chamber of Commerce at Meppel, The Netherlands. Registration
SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
INSTALLATION/PROGRAMMING INSTRUCTIONS E4KP ENTRYCHECK
Security Door Controls 3580 Willow Lane, Westlake Village, CA 91361-4921 (805) 494-0622 Fax: (805) 494-8861 www.sdcsecurity.com E-mail: [email protected] INSTALLATION/PROGRAMMING INSTRUCTIONS E4KP
User manual Rev 1.3 Contents
User manual Rev 1.3 Contents 1. Introduction...4 2. System specifications...5 2.1.. General overview...5 2.2. Maximum capacity...6 2.3. Electrical specifications...6 2.4. Mechanical specifications...6
Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
Procurement Specification for a High Security Lift Arm Barrier (HSLAB) EB950 CR Armstrong High Security Lift Arm Barrier
Procurement Specification for a High Security Lift Arm Barrier (HSLAB) EB950 CR Armstrong High Security Lift Arm Barrier A. Requirement This document is to be used to specify the physical and operational
ZC-24DO CANopen I/O Module: 24 Digital Outputs
Z-PC Line EN ZC-24DO CANopen I/O Module: 24 Digital Outputs Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - DIP-switches
ABB Drives. User s Manual HTL Encoder Interface FEN-31
ABB Drives User s Manual HTL Encoder Interface FEN-31 HTL Encoder Interface FEN-31 User s Manual 3AUA0000031044 Rev B EN EFFECTIVE: 2010-04-06 2010 ABB Oy. All Rights Reserved. 5 Safety instructions
In-Line Fluid Monitoring Packages
In-Line Fluid Monitoring Packages Informer TM & ProControl TM 1KE PROVEN QUALITY. LEADING TECHNOLOGY. The Affordable Way to Measure Fluids & Reduce Paint Waste The InformerTM and ProControlTM 1KE are easy-to-use
Industrial Bar Code Scanners
DS2100N & DS2400N Industrial Bar Code Scanners Enhanced Connectivity Ease of use Configuration SW Tool ACR-Lite APPLICATIONS Small conveyor sorting Picking systems Items and parts tracking Process control
ABLOY DOOR AUTOMATICS Easy access for all types of swing doors
ABLOY DOOR AUTOMATICS Easy access for all types of swing doors Automatic door operators bring additional convenience in situations where the doors opening manually would be inconvenient or laborious. Recommended
Cable Cubby 1200 and 1400 Installation Guide
e NT: R.com for thtion O P IM tron talla w.ex uide, ins ations. o ww Go t te user g specific nd ple com ctions, a u instr 00 and 400 Installation Guide This guide provides instructions for an experienced
ENET-710. ENET-710 - Ethernet Module ENET-710 JAN / 06 FOUNDATION
ENET-710 ENET-710 - Ethernet Module JAN / 06 ENET-710 FOUNDATION E N E T 7 1 0 ME smar www.smar.com Specifications and information are subject to change without notice. Up-to-date address information is
UniStream CPU-for-Panel
UniStream CPU-for-Panel Installation Guide USC-P-B10 Unitronics UniStream platform comprises control devices that provide robust, flexible solutions for industrial automation. This guide provides basic
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12