1 Course: WIN310 Student Lab Setup Guide Summer 2010 Microsoft Windows Server 2003 Network Infrastructure (70-291) ISBN: Published by Wiley & Sons 1
2 STUDENT COMPUTER SETUP Hardware Requirements All hardware must be on the Microsoft Windows Server 2003 HCL. One Pentium 133-MHz minimum; Pentium 733 or greater recommended 10-GB hard disk minimum; One CD-ROM drive Two network adapter cards One network crossover cable for every two student computers Software Requirements Microsoft Windows Server 2003, Enterprise Edition SP1 ( ISO on ACS Download) Microsoft PowerPoint or Microsoft PowerPoint Viewer Microsoft PowerPoint Viewer is provided on the Student CD. A 180-day evaluation edition of Windows Server 2003, Enterprise Edition, is included in the textbook. Use the following setup procedure to configure each student computer to boot Windows Server 2003 as a member server in the Contoso Windows Server 2003 domain. In this section, you will Install and configure Windows Server 2003 on all student computers. Install and configure Active Directory on the student computers according to Table 1-1 below. Child Domain Name Student Computers atlanta.contoso.com Computer01: Domain Computer02: Domain replica auckland.contoso.com Computer03: Domain Computer04: Domain replica austin.contoso.com Computer05: Domain Computer06: Domain replica boston.contoso.com Computer07: Domain Computer08: Domain replica chicago.contoso.com Computer09 : Domain Computer10: Domain replica dallas.contoso.com Computer11: Domain Computer12: Domain replica denver.contoso.com Computer13: Domain Computer14: Domain replica london.contoso.com Computer15: Domain Computer16: Domain replica miami.contoso.com Computer17: Domain Computer18: Domain replica moscow.contoso.com Computer19: Domain Computer20: Domain replica paris.contoso.com Computer21: Domain Computer22: Domain replica perth.contoso.com Computer23: Domain Computer24: Domain replica phoenix.contoso.com Computer25 : Domain Computer26: Domain replica seattle.contoso.com Computer27: Domain Computer28: Domain replica tokyo.contoso.com Computer29: Domain Computer30: Domain replica 2
3 Installing Windows Server 2003 on the Student Computers Using the Manual Method Power down the CPU and set the Hard Disk selector switch to 4. Insert your SATA hard disk. Power up the system and press the button on the DVD drive to open up the tray and insert your Windows Server 2003 SP1 installation CD to the DVD drive. After Windows Server 2003 Setup is launched, follow these steps to continue the installation. 1. Select [A] to install Windows 2003 Enterprise Edition 2. On the Welcome To Setup screen, press ENTER to continue the installation. 3. On the Windows Server 2003 Licensing Agreement screen, select I Agree by pressing F8. If another copy of Windows Server 2003 is detected, a Windows Server 2003 Setup screen informs you that you can repair the installation. If another copy of Windows Server 2003 is detected, press ESC to continue. 4. The Windows Server 2003 Setup screen appears, prompting you to select an area of free space or an existing partition on which to install Windows Server 2003, create a partition, or delete a partition. If any partitions exist, delete them by pressing the D key and following the on-screen instructions. Once the disk(s) contain only un-partitioned space, go to the next step. 5. Make sure that the un-partitioned space on Disk 0 is selected, and then press ENTER to continue installation. 6. When prompted to select the file format, select Format This Partition Using The NTFS File System, and then press ENTER to continue. If you re prompted to insert the CD, be sure to do so, and then press ENTER to continue. The system will perform various installation tasks and then restart when complete. IMPORTANT If your computer supports booting from the CD, after Windows Server 2003 Setup restarts, the computer might try to boot from the Windows Server 2003 CD. If this happens, you should be prompted to press a key to boot from the CD-ROM. However, if Setup restarts automatically, simply remove the CD, and then restart the computer. A Windows Setup message box appears, and the installation continues. Running the GUI Mode Phase of Windows Server 2003 Setup 1. On the Regional Settings screen, ensure that the system locale, user locale, and keyboard layout are correct for your language and location, and then click Next. The Personalize Your Software screen appears, prompting you for your name and organization name. 2. In the Name text box, type any names or characters you wish to enter (this information is of no consequence to the installation) and then click Next. 3. On the Your Product Key screen, enter the product key, and then click Next. The Licensing Modes screen appears, prompting you to select a licensing mode. By default, the Per Server option is selected. 4. Select the Per Device or Per User option, and then click Next. 5. On the Computer Name And Administrator Password screen, in the Computer Name text box, type computerxx (where xx is a unique number that you assigned to each computer, such as Computer01, Computer02, Computer03, and so forth). NOTE Windows Server 2003 displays the computer name in all capital letters regardless of how it is entered. 6. In the Administrator Password and Confirm Password text boxes, type then click Next.
4 7. In the Date And Time Settings dialog box, select the appropriate date, time, and time zone, and then click Next. 8. In the Network Settings dialog box, click the Custom Settings option, and then click Next. NOTE At this point, if your network card is not detected, you must install the card manually. You might have to come back to these steps when configuring your network card later. 9. Select the Internet Protocol (TCP/IP) option, and click Properties. 10. In the General tab, click the Use The Following IP Address option, and configure the following settings. Option Setting IP Address x (where x is the unique number you assigned to the student computers) Subnet Mask Default Gateway Enter the default gateway for your network. If you don t know the IP address, check with your network administration team. Otherwise, leave this field blank. Preferred DNS Server Alternate DNS Server Insert the IP address of another DNS server on your network, if applicable. Otherwise, leave this field blank. 11. Click OK to close the Networking Components dialog box. 12. Click Next to continue with setup. The Workgroup Or Computer Domain screen appears, prompting you to join either a workgroup or a domain. 13. Verify that the No, This Computer Is Not On A Network, Or Is On A Network Without A Domain option is selected and that the workgroup name is Workgroup, and then click Next. 14. Windows Setup begins copying installation files. The installation should proceed uninterrupted. Eventually, the computer will restart. Installing Active Directory on the Student Computers Whether you install Active Directory, there are some important considerations. First, the odd-numbered computers must be set up before their even-numbered counterparts because the even-numbered computers are replica domain s of the odd-numbered computers. DNS registration during Active Directory installation sometimes fails. Therefore, you should force DNS registration after each Active Directory install. This procedure is simple: at a command prompt, enter the following command: ipconfig /registerdns. IMPORTANT Complete Active Directory installation on the odd-numbered computers before installing on the even-numbered computers. Installing Active Directory Using the Manual Method IMPORTANT Complete this task from the odd-numbered student computers. They will become the first domain s of each child domain. Installing Active Directory on the First Domain Controller in the Child Domain Using the Manual Method 1. Log on to the Windows 2003 server using the local administrator account credentials. 2. Click Start, select Run, type dcpromo in the Open box, and then press ENTER. 3. On the Welcome To The Active Directory Installation Wizard page, click Next to proceed with Active Directory installation.
5 4. On the Operating System Compatibility page, click Next. 5. On the Domain Controller Type page, select Domain Controller For A New Domain, and then click Next. 6. On the Create New Domain page, select Child Domain in an existing domain tree, and then click Next. 7. On the Networking Credential page, in the User Name box, enter administrator; in the Password box, enter and in the Domain box, enter contoso.com. 8. On the Child Domain Installation page, in the Parent Domain box, enter contoso.com, and in the Child Domain box, enter domain, where domain is the child domain indicated in Table 1-1, Child Domains, shown previously in this document (for example, auckland). Click Next. 9. On the NetBIOS Domain Name Page, verify that your domain name is typed correctly, and click Next. 10. On the Database And Log Folders page, click Next to leave the log files and database in their default location. (c:\windows\ntds) 11. On the Shared System Volume page, ensure that the Sysvol folder is on a volume formatted with the NTFS file system (this should already be done). Click Next. (c:\windows\sysvol) 12. On the DNS Registration Diagnostics page, view the details of the diagnostic test. Then ensure that the primary DNS server is listed as Instructor01.Contoso.Com. Click Next to continue the installation. 13. On the Permissions page, click Next to accept the default permissions setting. 14. On the Directory Services Restore Mode Administrator Password page, type as the restore mode password. Confirm the password by typing it again, and then click Next to proceed with the Active Directory installation. 15. Review the Summary dialog box, and then click Next to install Active Directory. 16. When the Completing The Active Directory Installation Wizard page appears, click Finish, then click Restart Now to restart the computer. 17. Log on using the appropriate domain administrator name and password. 18. On the This Server Is Now A Domain Controller page, click Finish. Active Directory is now installed on the server. 19. Click Start, select Run, enter cmd in the Open box, and press ENTER. 20. In the command prompt window, type ipconfig /registerdns, and press ENTER. Close the command prompt window. IMPORTANT Complete this task from the even-numbered student computers. They will become replica domain s in the new child domain. Installing Active Directory on a Replica Domain Controller Using the Manual Method 1. Log on to the Windows 2003 server using the local administrator account credentials. 2. Click Start, select Run, type dcpromo in the Open box, and then press ENTER. 3. On the Welcome To The Active Directory Installation Wizard page, click Next to proceed with Active Directory installation. 4. On the Operating System Compatibility page, click Next. 5. On the Domain Controller Type page, select Additional Domain Controller for an Existing Domain, and then click Next. 6. On the Networking Credential page, in the User Name box, enter administrator; in the Password box, enter and in the Domain box, enter contoso.com. 7. On the Additional Domain Controller page, enter domain.contoso.com (where domain is the domain indicated in Table 1-1, Child Domains, shown previously in this document). 8. On the Database And Log Folders page, click Next to leave the log files and database in their default location.
6 9. On the Shared System Volume page, ensure that the Sysvol folder is on a volume formatted with the NTFS file system (this should already be done). Click Next. 10. On the Directory Services Restore Mode Administrator Password page, type as the restore mode password. Confirm the password by typing it again, and then click Next to proceed with the Active Directory installation. 11. Review the Summary dialog box, and then click Next to install Active Directory. 12. When the Completing The Active Directory Installation Wizard page appears, click Finish, and then click Restart Now to restart the computer. 13. Log on using the appropriate domain administrator name and password. 14. On the This Server Is Now A Domain Controller page, click Finish. Active Directory is now installed on the server. 15. Click Start, select Run, enter cmd in the Open box, and then press ENTER. 16. In the command prompt window, type ipconfig /registerdns, and then press ENTER. Close the command prompt window. NOTE Complete the following task from the odd-numbered student computers. Configuring the Active Directory Database for Student Logons In this procedure, you create an organizational unit (OU), student accounts, and a Students group. IMPORTANT These steps must be completed in each child domain. 1. Click Start, select Administrative Tools, and then select Active Directory Users And Computers to open the Active Directory Users And Computers console. 2. In the console tree, select the Domain.Contoso.Com node. 3. On the Action menu, select New, and then select Organizational Unit. The New Object Organizational Unit dialog box appears, which indicates the location where the object will be created. Verify that this location is Atlanta.Contoso.Com. 4. In the Name text box, type students, and then click OK. The Students OU is created and selected. 5. On the Action menu, select New, and then click User. 6. Create a new user account with the following information. 7. Click Next. 8. In the Password text boxes, type MSPress#1. Confirm the password by typing it into the Confirm Password text box. Clear the User Must Change Password At Next Logon option, and select the Password Never Expires option. 9. Click Next. The summary screen appears, displaying configuration settings for Studentxx. Text Box Information to Type First Name student Last Name xx (this is the number in the computer name) User Logon Name studentxx 10. Click Finish. 11. Complete steps 5 through 11 to create additional student accounts. Name the accounts to correspond to the names of the computers (for example, student01 and student02 for the first domain, student03 and student04 for the second domain, and so forth). 12. Close the Active Directory Users And Computers snap-in. Enabling Local Logons for the Student Accounts 1. Start your computer running Windows Server 2003, and log on as an administrator using the administrator account. 2. Click Start, select Administrative Tools, and then select Domain Controller Security Policy. 3. Under the Security Settings node, expand Local Policies.
7 4. Select User Rights Assignment, and in the details pane, double-click Allow Log On Locally. 5. In the Allow Log On Locally Properties window, click Add User Or Group. 6. In the Add User Or Group window, click Browse. 7. Click the Advanced button in the Select Users, Computers, Or Groups window. 8. In the Select Users, Computers, Or Groups window, click Find Now. 9. Hold down the CTRL key while selecting both Studentxx accounts from the Search Results pane, and then click OK. 10. Click OK to accept both accounts. 11. Click OK to finish adding both accounts to the Domain Controller Security Policy. Close the console. Additional Setup Instructions: Labeling the Network Connection Icons IMPORTANT To complete the exercises for Lab 1 and Lab 2, you must install and configure a second network adapter. Once you have installed the second network adapter, complete this task on all student computers. 1. Start your computer running Windows Server 2003, and log on as an administrator using the local administrator account. 2. Click Start, select Control Panel, and select Taskbar And Start Menu. 3. In the Taskbar And Start Menu Properties page, click the Start Menu tab. 4. In the Start Menu tab, click Customize. 5. Click the Advanced tab. 6. Scroll down in the Start Menu Items window. 7. Under Network Connections, select the Link To Network Connections Folder option, and then click OK. 8. Click OK to accept your changes to the Start menu. 9. Click Start, and then click Network Connections. 10. Right-click the connection labeled Local Area Connection. 11. Choose Rename. 12. Type contoso ltd network, and press ENTER. 13. Right-click the connection labeled Local Area Connection Choose Rename. 15. Type litware inc network, and then press ENTER. 16. Close the Network Connections window. The correct initial TCP/IP settings for the network adapters are shown in Table 1-2 below Student Computer IP Addressing Computer Name Contoso, Ltd., Network Litware, Inc., Network Computer01 IP address: Computer Name Contoso, Ltd., Network Litware, Inc., Network Computer02 IP address: Computer03 IP address: Computer04 IP address:
8 Computer05 IP address: Computer06 IP address: Computer07 IP address: Computer08 IP address: Computer09 IP address: Computer10 IP address: Computer11 IP address: Computer12 IP address: Computer13 IP address: LAB SETUP GUIDE 23 Computer14 IP address: Computer15 IP address: Computer16 IP address: Computer17 IP address: Computer18 IP address: Computer19 IP address: Computer20 IP address: Computer21 IP address: Computer22 IP address: Computer23 IP address: Computer24 IP address: Computer25 IP address: Computer26 IP address: Computer27 IP address: Computer28 IP address: Computer29 IP address: Computer30 IP address:
Course: WIN310 Student Lab Setup Guide Microsoft Windows Server 2003 Network Infrastructure (70-291) ISBN: 0-470-06887-6 STUDENT COMPUTER SETUP Hardware Requirements All hardware must be on the Microsoft
Installation of MicroSoft Active Directory Before you start following this article you must be aware this is simply a lab setup and you need to assign relevant ip address, hostnames & domain names which
JWCL031_appB_467-475.indd Page 467 5/12/08 11:02:46 PM user-s158 Appendix B Lab Setup Guide The Windows Server 2008 Applications Infrastructure Configuration title of the Microsoft Official Academic Course
Islamic University of Gaza College of Engineering Computer Department Computer Networks Lab Introduction to Administering Accounts and Resources Prepared By: Eng.Ola M. Abd El-Latif Mar. /2010 0 :D Objectives
Installing Windows Rights Management Services with Service Pack 2 Step-by- Step Guide Microsoft Corporation Published: October 2006 Author: Brian Lich Editor: Carolyn Eller Abstract This step-by-step guide
Operating System Installation Guide This guide provides instructions on the following: Installing the Windows Server 2008 operating systems on page 1 Installing the Windows Small Business Server 2011 operating
1. Set Daylight Savings Time... 3 a. Have client log into Novell/Local Machine with Administrator Account...3 b. Access Adjust Date/Time...3 c. Make sure the time zone is set to Central Time...3 2. Create
How to Install Active Directory on Server 2003 Table of Content HOW DO I INSTALL ACTIVE DIRECTORY ON MY WINDOWS SERVER 2003 SERVER?... 2 STEP 1: CONFIGURE THE COMPUTER'S SUFFIX... 3 STEP 2: CONFIGURING
How do I install Active Directory on my Windows Server 2003 server? Here is a quick list of what you must have: An NTFS partition with enough free space An Administrator's username and password The correct
Installing the Active Directory Domain Services Role Press the Ctrl-Alt-Del on the xxrwdc computer. Log in as the default administrator of the local computer with the username Administrator and cisisthebest!
Windows 2003 Server Installation Guide Revision 2.0 April 14, 2011 Licenses This manual is the exclusive property of Prometric, Inc. This manual is licensed for use with restrictions to authorized centers
Page 1 of 6 How to install Small Business Server 2003 in an existing Active Directory domain INTRODUCTION This article describes how to install a Microsoft Windows Small Business Server (SBS) 2003-based
Installing Active Directory 119 Installing Active Directory Installing Active Directory is an easy and straightforward process as long as you planned adequately and made the necessary decisions beforehand.
CHAPTER 3 Installing Windows XP Professional After completing this chapter, you will be able to: Plan for an installation of Windows XP Professional. Use a CD to perform an attended installation of Windows
Installing the Microsoft Network Driver Interface Overview This guide explains how to install the PictureTel Live200 Microsoft Network Driver Interface (NDIS) software you have downloaded from PictureTel's
How To Use 802.1x EAP-TLS or PEAP-MS-CHAP v2 with Microsoft Windows Server 2003 to Make a Secure Network Introduction This document describes how to create a secure LAN, using two servers and an 802.1xcompatible
Omni 56K USB Lite Quick Start Guide ZyXEL TOTAL INTERNET ACCESS SOLUTION 1. Hardware Installation Connect your modem to your analog phone or fax. Use the phone cord included to connect to the phone jack
Windows 7 Enterprise Desktop Support Technician Revised and Expanded Version Lab Manual EXECUTIVE EDITOR EDITORIAL PROGRAM ASSISTANT DIRECTOR OF SALES DIRECTOR OF MARKETING SENIOR PRODUCTION AND MANUFACTURING
AD RMS Step-by-Step Guide Microsoft Corporation Published: March 2008 Author: Brian Lich Editor: Carolyn Eller Abstract This step-by-step guide provides instructions for setting up a test environment to
Install the Production Treasury Root Certificate (Vista / Win 7) The Production Treasury Root Certificate should be maintained on your local workstations to use OTCnet Check Capture and Deposit Reporting.
Deploying Remote Desktop IP Virtualization Step-by-Step Guide Microsoft Corporation Updated: April 2010 Published: July 2009 Abstract Remote Desktop IP Virtualization provides administrators the ability
Windows Domain Network Configuration Guide Windows Domain Network Configuration Guide for CCC Pathways Copyright 2008 by CCC Information Services Inc. All rights reserved. No part of this publication may
Trial environment setup Exchange Server Archiver - 3.0 Introduction This document describes how you can set up a trial environment for using Exchange Server Archiver with Exchange Server 2007. You do not
COURSE FILE (COURSE PLAN) Year : 2012-13 Sem: ODD Faculty Details Name of the Faculty : Mullai.P & Yaashuwanth.C Designation : Assistant Professor ( OG. ),Assistant Professor (OG) Department : Information
Step-by-Step Guide for Creating and Testing Connection Manager Profiles in a Test Lab Microsoft Corporation Published: May, 2005 Author: Microsoft Corporation Abstract This guide describes how to create
Secure Perfect RAID Recovery Instructions Contents Overview Dell PowerEdge 2500 RAID Level 1 Recovery Instructions Overview NOTE If you possess a previous version of this document, you may notice changes
c623242f-20f0-40fe-b5c1-8412a094fdc7 Deploying Personal Virtual Desktops by Using RemoteApp and Desktop Connection Step-by-Step Guide Microsoft Corporation Published: June 2009 Updated: April 2010 Abstract
Using StorageCraft Recovery Environment Quick Start Guide Version R91 English May 20, 2015 Agreement The purchase and use of all Software and Services is subject to the Agreement as defined in Kaseya s
Page 1 of 243 Team Foundation Server 2010, Visual Studio Ultimate 2010, Team Build 2010, & Lab Management Beta 2 Installation Guide (This is an alpha version of Benjamin Day Consulting, Inc. s installation
Customizing Remote Desktop Web Access by Using Windows SharePoint Services Stepby-Step Guide Microsoft Corporation Published: July 2009 Updated: September 2009 Abstract Remote Desktop Web Access (RD Web
Operating System Installation Guidelines The following document guides you step-by-step through the process of installing the operating systems so they are properly configured for boot camp. The document
Parallels Deploying Microsoft Clusters in Parallels Virtuozzo-Based Systems Copyright 1999-2008 Parallels, Inc. ISBN: N/A Parallels Holdings, Ltd. c/o Parallels Software, Inc. 13755 Sunrise Valley Drive
Notes: STATISTICA VERSION 9 STATISTICA ENTERPRISE INSTALLATION INSTRUCTIONS FOR USE WITH TERMINAL SERVER 1. These instructions focus on installation on Windows Terminal Server (WTS), but are applicable
Windows 2000 Security Configuration Guide Version 1.0 October 4, 2002 Prepared For: Microsoft Corporation Corporate Headquarters One Microsoft Way Redmond, WA 98052-6399 Prepared By: Science Applications
ILTA 2013 - HAND 6B Upgrading and Deploying Windows Server 2012 In the Legal Environment Table of Contents Purpose of This Lab... 3 Lab Environment... 3 Presenter... 3 Exercise 1 Add Roles and Features...
APPENDIXC Reference and Troubleshooting: FTP, IIS, and Firewall Information Although Cisco VXC Manager automatically installs and configures everything you need for use with respect to FTP, IIS, and the
Clustering VirtualCenter 2.5 Using Microsoft Cluster Services This paper documents the steps to successfully implement a high availability solution for VirtualCenter 2.5 using Microsoft s cluster services.
Network Scanner Tool R3.1 User s Guide Version 3.0.04 Copyright 2000-2004 by Sharp Corporation. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited,
Wazza s QuickStart: Setting up a Web Server (IIS) Windows XP This document details the following four steps in setting up a Web Server (aka Internet Information Services -IIS) on Windows XP: Configuring
Página 1 de 54 Step-by-Step Guide for Setting Up VPN-based Remote Access in a Test Lab This guide provides detailed information about how you can use five computers to create a test lab with which to configure
If you have set up a domain controller previously with Windows 2000 Server, or Windows Server 2003, then you would be familiar with the dcpromo.exe command also be used to set up a Domain Controller on
How to Test Out Backup & Replication 6.5 for Hyper-V Mike Resseler May, 2013 2013 Veeam Software. All rights reserved. All trademarks are the property of their respective owners. No part of this publication
Getting Started with Vision 6 Version 6.9 Notice Copyright 1981-2009 Netop Business Solutions A/S. All Rights Reserved. Portions used under license from third parties. Please send any comments to: Netop
MULTIMEDIA REDIRECTION: EFFECT ON SERVER CAPACITY FOR CITRIX XENDESKTOP VIRTUAL DESKTOPS OUR FINDINGS Organizations considering deploying virtual desktops as part of a Virtual Desktop Infrastructure (VDI)
1.0 (Build 15) 2 Table of Contents Foreword 0 Part I Welcome to SmartSync Monitor 3 Part II Getting Started 4 1 Copyright... 4 2 System... requirements and installation 4 3 Uninstalling... 5 6 Part III
Using Group Policies to Install AutoCAD CMMU 5405 Nate Bartley 9/22/2005 Before we get started This manual provides a step-by-step process for creating a Group Policy that will install AutoCAD to a Windows
25265 - SYSTEM ADMINISTRATION LAB Ex.NO:1 Installation of Windows Server 2003 AIM: To write Installation of Windows 2003 Server. PROCEDURE: To install Windows Server 2003: 1 Insert the Windows Server 2003
HP ProLiant ML110 Server Network Operating System Installation Guide January 2004 (First Edition) Part Number 344-535-001 Regulatory Model Number HSTNS-3100 2004 Hewlett-Packard Development Company, L.P.
Installation Instruction STATISTICA Enterprise Small Business Notes: ❶ The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b) workstation installations
PROPALMS VDI Version 2.1 Quick Start Guide for Parallels Virtuozzo Rev. 1.1 Published: JULY-2011 1999-2011 Propalms Ltd. All rights reserved. The information contained in this document represents the current
: Managing, Maintaining, and Troubleshooting, 5e Chapter 3 Installing Windows Objectives How to plan a Windows installation How to install Windows Vista How to install Windows XP How to install Windows
Lab A: Deploying and Managing Software by Using Group Policy Answer Key Exercise 1 Assigning Software This Answer Key provides the detailed steps for completing Lab A: Deploying and Managing Software by
Step By Step Guide: Demonstrate DirectAccess in a Test Lab Microsoft Corporation Published: May 2009 Updated: October 2009 Abstract DirectAccess is a new feature in the Windows 7 and Windows Server 2008
Introduction EASYLABEL 6 has several new features for saving the history of label formats. This history can include information about when label formats were edited and printed. In order to save this history,
Contents 1. Introduction... 3 1.1. Setup... 3 2. Introduction to Active Directory Services... 4 3. Installing and Configuring Active Directory Services... 5 3.1. Joining to Domain... 5 3.2. Promoting Member
Tufts VPN Client User Guide for Windows Introduction The Tufts Virtual Private Network (VPN) implementation is a service that is provided to the faculty and staff of Tufts University to enable secure access
STATISTICA VERSION 12 STATISTICA ENTERPRISE SMALL BUSINESS INSTALLATION INSTRUCTIONS Notes 1. The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b)
Step-by-Step Guide to Setup Instant Messaging (IM) Workspace Datasheet CONTENTS Installation System requirements SQL Server setup Setting up user accounts Authentication mode Account options Import from
StarWind iscsi SAN: Configuring HA File Server for SMB NAS February 2012 TRADEMARKS StarWind, StarWind Software and the StarWind and the StarWind Software logos are trademarks of StarWind Software which
User Guide CTERA Agent August 2011 Version 3.0 Copyright 2009-2011 CTERA Networks Ltd. All rights reserved. No part of this document may be reproduced in any form or by any means without written permission
Deploying Remote Desktop Connection Broker with High Availability Step-by-Step Guide Microsoft Corporation Published: May 2010 Abstract This guide describes the steps for configuring Remote Desktop Connection
Operating Instructions (For Setting Up) Digital Imaging Systems Installation Overview Model No. DP-8060 / 8045 / 8035 Table of Contents Setting Your Machine Installation Overview General Installation Overview...
ECE/CS 4984: Wireless Networks and Mobile Systems Pre-lab and In-class Laboratory Exercise 10 (L10) Part I Objectives and Lab Materials Objective The objectives of this lab are to: Familiarize students
ESXi 4.1 Embedded vcenter Server 4.1 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition. To check for more recent
Software Installation Guide PrintIQ TM Software Installation Requirements Please use the following guide to ensure that you're meeting all requirements prior to installing the PrintIQ TM Xerox Device Agent
LepideAuditor Suite for File Server Installation and Configuration Guide Table of Contents 1. Introduction... 4 2. Requirements and Prerequisites... 4 2.1 Basic System Requirements... 4 2.2 Supported Servers
Core Protection for Virtual Machines 1 Comprehensive Threat Protection for Virtual Environments. Installation Guide e Endpoint Security Trend Micro Incorporated reserves the right to make changes to this
Using TViX Network There are two network mode. One is SAMBA mode another is NFS mode. SAMBA mode : You can play the file via network without special program, but the speed is lower than NFS mode. ( Currently,
i-stat TECHNICAL BULLETIN Configuring Wireless Settings in an i-stat 1 Wireless Analyzer Before configuring wireless settings, please enable the wireless functionality by referring to the Technical Bulletin
Notes: STATISTICA VERSION 10 STATISTICA ENTERPRISE SERVER INSTALLATION INSTRUCTIONS 1. The installation of the STATISTICA Enterprise Server entails two parts: a) a server installation, and b) workstation
NSi Mobile Installation Guide Version 6.2 Revision History Version Date 1.0 October 2, 2012 2.0 September 18, 2013 2 CONTENTS TABLE OF CONTENTS PREFACE... 5 Purpose of this Document... 5 Version Compatibility...
Windows Peer-to-Peer Network Configuration Guide Windows Peer-to-Peer Network Configuration Guide for CCC Pathways Copyright 2008 by CCC Information Services Inc. All rights reserved. No part of this publication
Course 2277: Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Managing and Monitoring Domain Name System To adjust the TTL value for a zone: 1. Log on with a non-administrative
Dialing Into Dartmouth With Windows 95/98 Who needs this document? Any member of the Dartmouth community who wants to gain access to Dartmouth s network resources, such as electronic mail and the Internet,
Veritas Cluster Server Database Agent for Microsoft SQL Configuration Guide Windows 2000, Windows Server 2003 5.0 11293743 Veritas Cluster Server Database Agent for Microsoft SQL Configuration Guide Copyright
QUANTIFY INSTALLATION GUIDE Thank you for putting your trust in Avontus! This guide reviews the process of installing Quantify software. For Quantify system requirement information, please refer to the
Team Foundation Server 2012 Installation Guide Page 1 of 143 Team Foundation Server 2012 Installation Guide Benjamin Day email@example.com v1.0.0 November 15, 2012 Team Foundation Server 2012 Installation
istorage Server: High-Availability iscsi SAN for Windows Server 2008 & Hyper-V Clustering Tuesday, Feb 21 st, 2012 KernSafe Technologies, Inc. www.kernsafe.com Copyright KernSafe Technologies 2006-2012.