istorage Server: High-Availability iscsi SAN for Windows Server 2008 & Hyper-V Clustering
|
|
|
- Daniel Camron Watkins
- 10 years ago
- Views:
Transcription
1 istorage Server: High-Availability iscsi SAN for Windows Server 2008 & Hyper-V Clustering Tuesday, Feb 21 st, 2012 KernSafe Technologies, Inc. Copyright KernSafe Technologies All right reserved.
2 Table of Contents Overview... 4 Configuring on Domain Controller... 6 Network Adapter... 6 Install Active Directory... 7 Install DNS Configuring on istorage Server Network Adapter Preparing Quorum Volume Preparing Generic Volume Configuring on istorage Server Network Adapter Preparing Volume Creating Application Creating Quorum application Creating Generic application Configuring on Cluster Node Network Adapter Join to the domain Install MPIO Feature Log in to iscsi disks Enable Multipath Support Installing Failover Clustering Service Configuring on Cluster Node Network Adapter... 81
3 Join to the domain Install MPIO Feature Log in to iscsi disks Enable Multipath Support Installing Failover Clustering Service Configuring Failover Clustering Validate a Configuration Create a Failover Cluster Contact
4 Overview KernSafe istorage Server is an advanced and powerful, full-featured software-only iscsi Target that fully conforms to the latest iscsi Standard 1.0 (former Draft 20). It is an IP SAN solution allowing you to quickly export existing storages such as disk images, VHD files, physical disks, partitions, CD/DVD-ROMs, tapes or any other type of SCSI based devices and even a variety of popular CD/DVD images to the client machines. The software thus delivers immediate benefits, as it allows storage to be consolidated, virtualized and centrally managed. istorage Server also provides RAID-1 (mirror) feature enabling you to create two iscsi devices for mirror backup. Furthermore, istorage Server also supports a lot of features such as: VHD (Virtual Hard Disk) target, snapshots, STPI, RAID-1 and failover, these features are very important and poplar in storage industry world and make istorage Server is suitable for any size of business. High-availability clusters (also known as HA Clusters or Failover Clusters) are computer clusters that are implemented primarily for the purpose of providing high availability of services which the cluster provides. They operate by having redundant computers or nodes which are then used to provide service when system components fail. Normally, if a server with a particular application crashes, the application will be unavailable until someone fixes the crashed server. HA clustering remedies this situation by detecting hardware/software faults, and immediately restarting the application on another system without requiring administrative intervention, a process known as Failover. As part of this process, clustering software may configure the node before starting the application on it. For example, appropriate file systems may need to be imported and mounted, network hardware may have to be configured, and some supporting applications may need to be running as well. After istorage Server 2.0, it supports server side mirroring, synchronous replication and failover which allows user to create a high-availability iscsi SAN for Windows Server 2008 clustering and Hyper-v.
5 This document gives you detailed step-by-step instructions on KernSafe istorage Server configuring for Windows Server 2008 or Windows Server 2008 R2 failover clusters. Before to do so, prepare the following four computers or virtual machine in Hyper-v: Name IP Address Detail 08DC Domain Controller 08Node Failover Node 1 08Node Failover Node 2 KernStorage istorage Server1 KernStorage istorage Server2
6 Configuring on Domain Controller Network Adapter For working in clustering environment, the network adapter must be assigned a static IP address. Select the Internet Protocol Version 4(TCP/IPv4) and then press the Properties button, the Internet Protocol Version 4 (TCP/IPv4) dialog is shown. As Active Directory requires DNS, an address must be provided, in this case we can specify itself IP address. DNS will be installed later after installed Active Directory. Type the IP address and DNS server address. Press the OK button to continue.
7 Install Active Directory Select Start->Run and type dcpromo in the Open input box. Press the OK button to continue. The Active Directory Domain Services Installation Wizard is shown.
8 Press the Next button to continue. The Active Directory Domain Services Installation Wizard is shown, before clicking on Next button, please read the introducing instructions carefully.
9 Press the Next button to continue. Because we are creating Active Directory, Select the Create a new domain in a new forest option.
10 Press the Next button to continue. Specify the name of Forest Root Domain.
11 Press the Next button to continue. Select the Forest functional level.
12 Select Windows Server 2008 or Windows Server 2008 R2 if building Windows Server 2008 R2 clustering. Press the Next button to continue. Select the additional options for this domain controller.
13 Keep the selection of the DNS Server. Press the Next button to continue. The Active Directory Domain Services Installation Wizard is shown.
14 Press the Yes button to continue. Customize the directories for Database folder, Log files folder and SYSVOL folder. Press the Next button to continue. Specify the Directory Services Restore Mode Administrator Password.
15 Press the Next button to continue. Check if all of the parameters are correct; press the Back button if any change is required.
16 Press the Next button to continue. After a while, Active Directory Domain Services Installation is completed.
17 Press the Finish Button to close the wizard. Restart is required. Press the Restart Now button to restart the computer. Install DNS Use administrator role to log on to the Domain controller machine and launch the DNS Manager.
18 Right click on the Reverse Lookup Zone in the left tree view and then select New Zone menu item. The New Zone Wizard is shown.
19 Press the Next button to continue. Select zone type.
20 Select the Primary zone and keep the selection of Store the zone in Active Directory. Press the Next button to continue. Select zone replication scope.
21 Keep the default selection. Press the Next button to continue. Choose Reverse Lookup Zone Name.
22 Select IPv4 Reverse Lookup Zone. Press the Next button to continue. Type the network ID or zone name.
23 Select the Network ID and then type IP address in the Network ID. Press the Next button to continue. Specify dynamic update options.
24 Press the Next button to continue. Check if all of the parameters are correct, press the Back button if any change is required.
25 Press the Finish button to close the New Zone Wizard. Right click on the KernSafe.Local in the left tree view of DNS Manager, then select New Host (A or AAA) menu item.
26 The New Host dialog is shown.
27 Type host name in the Name and IP address in the IP address field for the 08Node1 machine. Check the Create associated pointer (PTR) record checkbox. Press the Add Host button to add 08Node1 DNS record. Type host name in the Name and IP address in the IP address field for the 08Node2 machine. Check the Create associated pointer (PTR) record checkbox. Press the Add Host button to add 08Node2 DNS record. Press the Done button to close New Host dialog. Now we will see the two records in the DNS Manager.
28
29 Configuring on istorage Server1 Network Adapter For working in clustering environment, the network adapter must be assigned a static IP address. Select the Internet Protocol Version 4(TCP/IPv4) and then press the Properties button, the Internet Protocol Version 4 (TCP/IPv4) dialog is shown.
30 Set the network adapter of KernStorage1 as shown in the figure. IP address is set as and Subnet mask is set as Preparing Quorum Volume Launch the istorage Server management consolle, press the Create button on the toolbar of istorage Server management console, the Create Device Wizard is shown. Select a device type
31 Choose Hard Disk. Press the Next button to continue.
32 Choose Image File in iscsi Medium Type page. Then press Next button to continue.
33 We choose Standard Image File and then press the Next button to continue. Specify image file path and size.
34 Select Create a new image file or Use existing image file if you already have one. Specify the device size. Press the Next button to continue. Set authorization mode.
35 Specify authorization mode as you required, we take Anonymous as an example. Press the Next button to continue. Finish creating iscsi Target
36 Type a target name in the Target Name field, or use the default. Check the Enable multiple initiators with full access connected (sharing and clustering) check box. Press the Finish button to continue. Preparing Generic Volume Launch the istorage Server management consolle, press the Create button on the toolbar of istorage Server management console, the Create Device Wizard is shown. Select a device type
37 Choose Hard Disk. Press the Next button to continue.
38 Choose Image File in iscsi Medium Type window. Then press Next button to continue.
39 We choose Standard Image File and then press Next button. Specify image file path and size.
40 Select Create a new image file or Use existing image file if you already have one. Specify the device size. Press the Next button to continue. Set authorization mode.
41 Specify authorization mode as you required, here we use Anonymous. Press the Next button to continue. Finish creating iscsi Target
42 Type a target name in the Target Name field, or use the default. Check the Enable multiple initiators with full access connected (sharing and clustering) check box. Press the Finish button. Now the sample images are shown in the istorage Server management console if successful.
43 Configuring on istorage Server2 Network Adapter For working in clustering environment, the network adapter must be assigned a static IP address. Select the Internet Protocol Version 4(TCP/IPv4) and then press the Properties button, the Internet Protocol Version 4 (TCP/IPv4) dialog is shown.
44 Set the network adapter of KernStorage1 as shown in the figure. IP address is set as and Subnet mask is set as Preparing Volume We also need two volumes on istorage Server2, we named them KernStorage.Qunrumpartner and KernStorage.Genericpartner which has the same size as volumes on istorage Server1. We create them as we do on istorage Server1. The main interface is shown as follows if successful.
45 Creating Application Creating Quorum application On istorage Server1, right click Applications on the left tree of the main interface, choose Create Application on the pop-up menu, the Create Application Wizard window will be shown.
46 Choose Failover iscsi SAN Node. Then press Next to continue.
47 Check the HA storage and click Edit to find the mirror target.
48 Input the IP and port of server2 in iscsi Source tab, then click Discovery on the bottom of the window to find the mirror target, choose the HApartner in the down-list. Press OK button to continue. Note: If the target needs CHAP authorization, you should provide User name and secret to logon. The mirror target will be added to the window, then click Next button to continue.
49 Now, the mirror target should be synchronization to the base target, if the two targets are both the new one and do not be initialized, we can choose Create mirror device without synchronization (Manual Initialization), otherwise, we must choose Create mirror device with full synchronization from base iscsi target. Press OK button to continue.
50 Click Finish button to complete the application creation. Creating Generic application On istorage Server1, right click Applications on the left tree of the main interface, choose Create Application on the pop-up menu, the Create Application Wizard window will be shown.
51 Choose Failover iscsi SAN Node. Then press Next to continue.
52 Check the HA storage and click Edit to find the mirror target.
53 Input the IP and port of server2 in iscsi Source tab, then click Discovery on the bottom of the window to find the mirror target, choose the HApartner in the down-list. Press OK button to continue. Note: If the target needs CHAP authorization, you should provide User name and secret to logon. The mirror target will be added to the window, then click Next button to continue.
54 Now, the mirror target should be synchronized to the base target, if the two targets are both the new one and do not be initialized, we can choose Create mirror device without synchronization (Manual Initialization), otherwise, we must choose Create mirror device with full synchronization from base iscsi target. Press OK button to continue.
55 Click Finish button to complete the application creation.
56 Now the two applications will be shown in the main interface if successful and the configuration on the istorage Server1 is completed. We do the same operations on istorage Server2 to create applications, after the creation, the main interface will be shown as follows:
57 Configuring on Cluster Node 1 Network Adapter For working in clustering environment, the network adapter must be assigned a static IP address. Select the Internet Protocol Version 4(TCP/IPv4) and then press the Properties button, the Internet Protocol
58 Version 4 (TCP/IPv4) dialog is shown. Type in the IP address, Subnet mask, Default gateway and Preferred DNS server. Set the second network adapter of 08Node.
59 Type in the IP address and Subnet mask. Press the OK button to change IP address. Join to the domain Press the OK button to change IP address. Open System Properties page.
60 Click on the Change settings link, the System Properties Dialog is shown.
61 Press the Change button.
62 Type 08Node1 in the Computer name and kernsafe.local in the Domain. Press the OK button to change computer name and join the domain. Domain controller account is required to join the domain. Type your user name and password. Press the OK button to continue.
63 If successful, the Computer Name/Domain Changes notification dialog is shown as below. Press the OK button to continue. Restart is required. Press the Restart Now button to restart the computer. Install MPIO Feature Launch Start->Administrative Tools->Server Manager, go to Features item, and click Add Features. An Add Features Wizard will appear. In the features list select Multipath I/O feature and install it.
64 Log in to iscsi disks Launch the Administrative Tools -> Microsoft iscsi initiator.
65 Select the Discovery page.
66 Press the Discover Portal button, the Discover Target Portal dialog is shown.
67 Type IP address or NDS name and Port of the istorage Server in the required fields. Press the OK button to add. Select the Targets page.
68 Select the targets just added and then press the Connect button.
69
70 Keep selection of the Add this connection to the list of Favorite Targets. Press the OK button to continue. If successful, the logged on targets are shown in the figure.
71 Enable Multipath Support Launch MPIO manager by clicking Start->Administrative Tools->MPIO. Go to Discover Multi-Paths tab, check Add support for iscsi devices.
72 Click the Add button. Windows will prompt you to reboot the server. Click the Yes button to restart your server. Launch the Windows Computer Management Console.
73 An Initialize Disk dialog is shown. Keep the selection of the tow disks. Select partition style for the selected disks. Press the OK button to continue.
74 Right click on the Disks and then select New Simple Volume, partition and format the two disks followed by wizard. If successful, the new volumes created are shown in the figure below.
75 Installing Failover Clustering Service Launch the Windows Server manager Console.
76 Select the Features node from the left tree view.
77 Click the Add Features link, the Add Features Wizard is shown.
78 Select the Failover Clustering. Press the Next button to continue.
79 Press the Install button to install the Failover Clustering feature. The installation of the Failover Clustering is going on.
80 If successful, the wizard will complete and show as the figure below.
81 Press the Close button. Configuring on Cluster Node 2 Network Adapter For working in clustering environment, the network adapter must be assigned a static IP address. Select the Internet Protocol Version 4(TCP/IPv4) and then press the Properties button, the Internet Protocol
82 Version 4 (TCP/IPv4) dialog is shown. Type in the IP address, Subnet mask, Default gateway and Preferred NDS server. Set the second network adapter of 08Node.
83 Type in the IP address and Subnet mask. Press the OK button to change IP address. Join to the domain Press the OK button to change IP address. Open System Properties page.
84 Click on the Change settings link, the System Properties dialog is shown.
85 Press the Change button.
86 Type 08Node2 in the Computer name and kernsafe.local in the Domain. Press the OK button to change computer name and join the domain. Domain controller account is required to join the domain. Type your user name and password. Press the OK button to continue.
87 If successful, the Computer Name/Domain Changes notification dialog is shown as below. Press the OK button to continue. Restart is required. Press the Restart Now button to restart the computer. Install MPIO Feature Launch Start->Administrative Tools->Server Manager, go to Features item, and click Add Features. An Add Features Wizard will appear. In the features list select Multipath I/O feature and install it.
88 Log in to iscsi disks Launch the Administrative Tools -> Microsoft iscsi initiator.
89 Select the Discovery page.
90 Press the Discovery Portal button, the Discovery Target Portal dialog is shown.
91 Type IP address or NDS name and Port of the istorage Server in the required fields. Press the OK button to add. Select the Targets page.
92 Select the targets just added and then press the Connect button.
93
94 Keep selection of the Add this connection to the list of Favorite Targets. Press the OK button to continue. If successful, the logged on targets are shown in the figure.
95 Enable Multipath Support Launch MPIO manager by clicking Start->Administrative Tools->MPIO. Go to Discover Multi-Paths tab, check Add support for iscsi devices.
96 Click the Add button. Windows will prompt you to reboot the server. Click the Yes button to restart your server.
97 Launch the Windows Computer Management Console. Disk1 and Disk2 are offline, we should not bring them online. Installing Failover Clustering Service Launch the Windows Server manager Console.
98 Select the Features node from the left tree view.
99 Click the Add Features link, the Add Features Wizard is shown.
100 Select the Failover Clustering. Press the Next button to continue.
101 Press the Install button to install the Failover Clustering feature. The installation of the Failover Clustering is going on.
102 If successful, the wizard will complete and show as the figure below.
103 Press the Close button. Configuring Failover Clustering Validate a Configuration Note that this step is not necessary for creating a cluster, but it ensures that the configuration is suitable for failover clustering. Launch to the Windows Failover Cluster Manager console in node 1 or node 2 machines.
104 Click on the Validate a Configuration link. The Validate a Configuration Wizard is shown.
105 Press the Next button to continue. Add nodes to the cluster.
106 Press the Browse button, the Select Computers dialog is shown. Press the Advanced button.
107 Select the 08NODE1 item and then press the OK button to add.
108 Press the OK button. Press the Browse button and add 08NODE2 by through the same way.
109 Press the Next button to continue.
110 Select Run all tests (recommended). Press the Next button to continue.
111 Press the Next button to continue. If successful, all the tests include SCSI-3 Persistent Reservation are valid and shown as the figure below.
112 Press the Finish button to complete configuration validation. Create a Failover Cluster Click on the Create a Cluster item in the Actions panel of Failover Cluster Manager.
113 The Create Cluster Wizard is shown.
114 Press the Next button to continue.
115 Press the Browse button and the Add button to add nodes to this cluster.
116 Press the Next button to continue. Specify IP address for the cluster.
117 Type an IP address in the Address field. Press the Next button to continue.
118 Press the Next button to continue or press the Previous button if any changes are needed. If successful, the Create Cluster Wizard is complete as shown in the figure below.
119 Press the Finish button to continue.
120 Now the creation of the cluster is completed, expand the cluster node and select the Storage node, it will shown as the figure below, both cluster disks are shown online.
121 Contact Support: Sales: Home Page: Product Page: Licensing Forum: KernSafe Technologies, Inc. Copyright KernSafe Technologies All right reserved.
istorage Server: High Availability iscsi SAN for Windows Server 2012 Cluster
istorage Server: High Availability iscsi SAN for Windows Server 2012 Cluster Tuesday, December 26, 2013 KernSafe Technologies, Inc www.kernsafe.com Copyright KernSafe Technologies 2006-2013.All right reserved.
StarWind iscsi SAN Configuring HA File Server for SMB NAS
Hardware-less VM Storage StarWind iscsi SAN Configuring HA File Server for SMB NAS DATE: FEBRUARY 2012 TECHNICAL PAPER Trademarks StarWind, StarWind Software and the StarWind and the StarWind Software
StarWind iscsi SAN Software: Using StarWind with MS Cluster on Windows Server 2003
StarWind iscsi SAN Software: Using StarWind with MS Cluster on Windows Server 2003 www.starwindsoftware.com Copyright 2008-2011. All rights reserved. COPYRIGHT Copyright 2008-2011. All rights reserved.
StarWind iscsi SAN: Configuring HA File Server for SMB NAS February 2012
StarWind iscsi SAN: Configuring HA File Server for SMB NAS February 2012 TRADEMARKS StarWind, StarWind Software and the StarWind and the StarWind Software logos are trademarks of StarWind Software which
StarWind iscsi SAN & NAS: Configuring HA File Server on Windows Server 2012 for SMB NAS January 2013
StarWind iscsi SAN & NAS: Configuring HA File Server on Windows Server 2012 for SMB NAS January 2013 TRADEMARKS StarWind, StarWind Software and the StarWind and the StarWind Software logos are trademarks
StarWind iscsi SAN & NAS: Configuring HA Storage for Hyper-V October 2012
StarWind iscsi SAN & NAS: Configuring HA Storage for Hyper-V October 2012 TRADEMARKS StarWind, StarWind Software and the StarWind and the StarWind Software logos are trademarks of StarWind Software which
StarWind iscsi SAN Software: Providing shared storage for Hyper-V's Live Migration feature on two physical servers
StarWind iscsi SAN Software: Providing shared storage for Hyper-V's Live Migration feature on two physical servers www.starwindsoftware.com Copyright 2008-2011. All rights reserved. COPYRIGHT Copyright
StarWind iscsi SAN & NAS: Configuring HA Shared Storage for Scale- Out File Servers in Windows Server 2012 January 2013
StarWind iscsi SAN & NAS: Configuring HA Shared Storage for Scale- Out File Servers in Windows Server 2012 January 2013 TRADEMARKS StarWind, StarWind Software and the StarWind and the StarWind Software
Drobo How-To Guide. Topics. What You Will Need. Prerequisites. Deploy Drobo B1200i with Microsoft Hyper-V Clustering
Multipathing I/O (MPIO) enables the use of multiple iscsi ports on a Drobo SAN to provide fault tolerance. MPIO can also boost performance of an application by load balancing traffic across multiple ports.
StarWind iscsi SAN Software: Using an existing SAN for configuring High Availability storage with Windows Server 2003 and 2008
StarWind iscsi SAN Software: Using an existing SAN for configuring High Availability storage with Windows Server 2003 and 2008 www.starwindsoftware.com Copyright 2008-2011. All rights reserved. COPYRIGHT
StarWind iscsi SAN Software: Using StarWind with MS Cluster on Windows Server 2008
StarWind iscsi SAN Software: Using StarWind with MS Cluster on Windows Server 2008 www.starwindsoftware.com Copyright 2008-2012. All rights reserved. COPYRIGHT Copyright 2008-2012. All rights reserved.
StarWind Virtual SAN Installation and Configuration of Hyper-Converged 2 Nodes with Hyper-V Cluster
#1 HyperConverged Appliance for SMB and ROBO StarWind Virtual SAN Installation and Configuration of Hyper-Converged 2 Nodes with MARCH 2015 TECHNICAL PAPER Trademarks StarWind, StarWind Software and the
Installation of MicroSoft Active Directory
Installation of MicroSoft Active Directory Before you start following this article you must be aware this is simply a lab setup and you need to assign relevant ip address, hostnames & domain names which
Appendix B Lab Setup Guide
JWCL031_appB_467-475.indd Page 467 5/12/08 11:02:46 PM user-s158 Appendix B Lab Setup Guide The Windows Server 2008 Applications Infrastructure Configuration title of the Microsoft Official Academic Course
StarWind iscsi SAN Software: Tape Drives Using StarWind and Symantec Backup Exec
StarWind iscsi SAN Software: Tape Drives Using StarWind and Symantec Backup Exec www.starwindsoftware.com Copyright 2008-2011. All rights reserved. COPYRIGHT Copyright 2008-2011. All rights reserved. No
K-Backup: Network automatic backup data to free iscsi SAN
K-Backup: Network automatic backup data to free iscsi SAN Monday, November 4, 2013 KernSafe Technologies,Inc www.kernsafe.com Copyright KernSafe Technologies 2006-2013.All right reserved. Table of Contents
StarWind Virtual SAN Installing & Configuring a SQL Server 2012 Failover Cluster
#1 HyperConverged Appliance for SMB and ROBO StarWind Virtual SAN Installing & Configuring a SQL Server 2012 Failover JANUARY 2015 TECHNICAL PAPER Trademarks StarWind, StarWind Software and the StarWind
Deploying Windows Streaming Media Servers NLB Cluster and metasan
Deploying Windows Streaming Media Servers NLB Cluster and metasan Introduction...................................................... 2 Objectives.......................................................
StarWind iscsi SAN Software: Using StarWind with VMware ESX Server
StarWind iscsi SAN Software: Using StarWind with VMware ESX Server www.starwindsoftware.com Copyright 2008-2010. All rights reserved. COPYRIGHT Copyright 2008-2010. All rights reserved. No part of this
Installing and Setting up Microsoft DNS Server
Training Installing and Setting up Microsoft DNS Server Introduction Versions Used Windows Server 2003 Setup Used i. Server Name = martini ii. Credentials: User = Administrator, Password = password iii.
How To Set Up A Two Node Hyperv Cluster With Failover Clustering And Cluster Shared Volume (Csv) Enabled
Getting Started with Hyper-V and the Scale Computing Cluster Scale Computing 5225 Exploration Drive Indianapolis, IN, 46241 Contents Contents CHAPTER 1 Introduction to Hyper-V: BEFORE YOU START. vii Revision
Searching for accepting?
If you have set up a domain controller previously with Windows 2000 Server, or Windows Server 2003, then you would be familiar with the dcpromo.exe command also be used to set up a Domain Controller on
Configuring Windows Server Clusters
Configuring Windows Server Clusters In Enterprise network, group of servers are often used to provide a common set of services. For example, Different physical computers can be used to answer request directed
Bosch Video Management System High availability with VMware
Bosch Video Management System High availability with VMware en Technical Note Bosch Video Management System Table of contents en 3 Table of contents 1 Introduction 4 1.1 Restrictions 4 2 Overview 5 3
Introduction. Versions Used Windows Server 2003
Training Installing Active Directory Introduction As SonicWALL s products and firmware keeps getting more features that are based on integration with Active Directory, e.g., Active Directory Connector
StarWind iscsi SAN Software: Implementation of Enhanced Data Protection Using StarWind Continuous Data Protection
StarWind iscsi SAN Software: Implementation of Enhanced Data Protection Using StarWind Continuous Data Protection www.starwindsoftware.com Copyright 2008-2011. All rights reserved. COPYRIGHT Copyright
Deploying Remote Desktop Connection Broker with High Availability Step-by-Step Guide
Deploying Remote Desktop Connection Broker with High Availability Step-by-Step Guide Microsoft Corporation Published: May 2010 Abstract This guide describes the steps for configuring Remote Desktop Connection
How To Install And Configure Windows Server 2003 On A Student Computer
Course: WIN310 Student Lab Setup Guide Microsoft Windows Server 2003 Network Infrastructure (70-291) ISBN: 0-470-06887-6 STUDENT COMPUTER SETUP Hardware Requirements All hardware must be on the Microsoft
Installing and Configuring a SQL Server 2014 Multi-Subnet Cluster on Windows Server 2012 R2
Installing and Configuring a SQL Server 2014 Multi-Subnet Cluster on Windows Server 2012 R2 Edwin Sarmiento, Microsoft SQL Server MVP, Microsoft Certified Master Contents Introduction... 3 Assumptions...
StarWind iscsi SAN Software: Configuring High Availability Storage for VMware vsphere and ESX Server
StarWind iscsi SAN Software: Configuring High Availability Storage for VMware vsphere and ESX Server www.starwindsoftware.com Copyright 2008-2011. All rights reserved. COPYRIGHT Copyright 2008-2011. All
UltraBac Documentation. UBDR Gold. Administrator Guide UBDR Gold v8.0
UltraBac Documentation UBDR Gold Bare Metal Disaster Recovery Administrator Guide UBDR Gold v8.0 UBDR Administrator Guide UBDR Gold v8.0 The software described in this guide is furnished under a license
AD RMS Step-by-Step Guide
AD RMS Step-by-Step Guide Microsoft Corporation Published: March 2008 Author: Brian Lich Editor: Carolyn Eller Abstract This step-by-step guide provides instructions for setting up a test environment to
StarWind iscsi SAN Software: Challenge-Handshake Authentication Protocol (CHAP) for Authentication of Users
StarWind iscsi SAN Software: Challenge-Handshake Authentication Protocol (CHAP) for Authentication of Users www.starwindsoftware.com Copyright 2008-2011. All rights reserved. COPYRIGHT Copyright 2008-2011.
Setting Up a Backup Domain Controller
Setting Up a Backup Domain Controller June 27, 2012 Copyright 2012 by World Class CAD, LLC. All Rights Reserved. A Backup Domain Controller After setting up a primary domain controller, we will want to
StarWind iscsi SAN: Configuring Global Deduplication May 2012
StarWind iscsi SAN: Configuring Global Deduplication May 2012 TRADEMARKS StarWind, StarWind Software, and the StarWind and StarWind Software logos are trademarks of StarWind Software that may be registered
How to configure Failover Clustering for Hyper-V hosts on HP ProLiant c-class server blades with All-in-One SB600c storage blade
How to configure Failover Clustering for Hyper-V hosts on HP ProLiant c-class server blades with All-in-One SB600c storage blade Executive summary... 2 System requirements... 2 Hardware requirements...
Using Microsoft Active Directory (AD) with HA3969U in Windows Server
Using Microsoft Active Directory (AD) with HA3969U in Windows Server Application Note Abstract This application note describes how to use Microsoft Active Directory (AD) service with HA3969U systems in
Installing and Configuring a. SQL Server 2012 Failover Cluster
Installing and Configuring a SQL Server 2012 Failover Cluster Edwin M Sarmiento Applies to: SQL Server 2012 SQL Server 2014 P a g e 1 Copyright This document is provided as-is. Information and views expressed
SAM Backup and Restore Guide. SafeNet Integration Guide
SAM Backup and Restore Guide SafeNet Integration Guide April 2011 Introduction Copyright 2011 SafeNet, Inc. All rights reserved. All attempts have been made to make the information in this document complete
Direct Storage Access Using NetApp SnapDrive. Installation & Administration Guide
Direct Storage Access Using NetApp SnapDrive Installation & Administration Guide SnapDrive overview... 3 What SnapDrive does... 3 What SnapDrive does not do... 3 Recommendations for using SnapDrive...
K-Backup: Automatic Network Backup solution
K-Backup: Automatic Network Backup solution Monday, November 4, 2013 KernSafe Technologies,Inc www.kernsafe.com Copyright KernSafe Technologies 2006-2013.All right reserved. Table of contents Overview...
SharePoint Server for Business Intelligence
SharePoint Server for Business Intelligence SharePoint Business Intelligence Content Team Summary: Step-by-step, learn how to install and configure SharePoint Server 2010 and SQL Server 2008 to create
In the Active Directory Domain Services Window, click Active Directory Domain Services.
Installing the Active Directory Domain Services Role Press the Ctrl-Alt-Del on the xxrwdc computer. Log in as the default administrator of the local computer with the username Administrator and cisisthebest!
Drobo How-To Guide. Cloud Storage Using Amazon Storage Gateway with Drobo iscsi SAN
The Amazon Web Services (AWS) Storage Gateway uses an on-premises virtual appliance to replicate a portion of your local Drobo iscsi SAN (Drobo B1200i, left below, and Drobo B800i, right below) to cloudbased
Replicating VNXe3100/VNXe3150/VNXe3300 CIFS/NFS Shared Folders to VNX Technical Notes P/N h8270.1 REV A01 Date June, 2011
Replicating VNXe3100/VNXe3150/VNXe3300 CIFS/NFS Shared Folders to VNX Technical Notes P/N h8270.1 REV A01 Date June, 2011 Contents Introduction... 2 Roadmap... 3 What is in this document... 3 Test Environment...
VMware for Bosch VMS. en Software Manual
VMware for Bosch VMS en Software Manual VMware for Bosch VMS Table of Contents en 3 Table of contents 1 Introduction 4 1.1 Restrictions 4 2 Overview 5 3 Installing and configuring ESXi server 6 3.1 Installing
StarWind iscsi SAN & NAS: Multipathing October 2012
StarWind iscsi SAN & NAS: Multipathing October 2012 TRADEMARKS StarWind, StarWind Software and the StarWind and the StarWind Software logos are trademarks of StarWind Software which may be registered in
How do I install Active Directory on my Windows Server 2003 server?
How do I install Active Directory on my Windows Server 2003 server? Here is a quick list of what you must have: An NTFS partition with enough free space An Administrator's username and password The correct
Course: WIN310. Student Lab Setup Guide. Summer 2010. Microsoft Windows Server 2003 Network Infrastructure (70-291)
Course: WIN310 Student Lab Setup Guide Summer 2010 Microsoft Windows Server 2003 Network Infrastructure (70-291) ISBN: 0-470-06887-6 Published by Wiley & Sons 1 STUDENT COMPUTER SETUP Hardware Requirements
Deploying Personal Virtual Desktops by Using RemoteApp and Desktop Connection Step-by-Step Guide
c623242f-20f0-40fe-b5c1-8412a094fdc7 Deploying Personal Virtual Desktops by Using RemoteApp and Desktop Connection Step-by-Step Guide Microsoft Corporation Published: June 2009 Updated: April 2010 Abstract
Configuring a Microsoft Windows Server 2012/R2 Failover Cluster with Storage Center
Configuring a Microsoft Windows Server 2012/R2 Failover Cluster with Storage Center Dell Compellent Solution Guide Kris Piepho, Microsoft Product Specialist October, 2013 Revisions Date Description 1/4/2013
Installation Guide July 2009
July 2009 About this guide Edition notice This edition applies to Version 4.0 of the Pivot3 RAIGE Operating System and to any subsequent releases until otherwise indicated in new editions. Notification
Step-by-Step Guide to Open-E DSS V7 Active-Active Load Balanced iscsi HA Cluster
www.open-e.com 1 Step-by-Step Guide to Open-E DSS V7 Active-Active Load Balanced iscsi HA Cluster (without bonding) Software Version: DSS ver. 7.00 up10 Presentation updated: May 2013 www.open-e.com 2
How to. Install Active Directory. Server 2003
How to Install Active Directory on Server 2003 Table of Content HOW DO I INSTALL ACTIVE DIRECTORY ON MY WINDOWS SERVER 2003 SERVER?... 2 STEP 1: CONFIGURE THE COMPUTER'S SUFFIX... 3 STEP 2: CONFIGURING
Faculty Details. : Assistant Professor ( OG. ),Assistant Professor (OG) Course Details. : B. Tech. Batch : 2010-2014. : Information Technology
COURSE FILE (COURSE PLAN) Year : 2012-13 Sem: ODD Faculty Details Name of the Faculty : Mullai.P & Yaashuwanth.C Designation : Assistant Professor ( OG. ),Assistant Professor (OG) Department : Information
Active Directory Infrastructure Design Document
Active Directory Infrastructure Design Document Written By Sainath KEV Microsoft MVP Directory Services Microsoft Author TechNet Magazine, Microsoft Operations Framework Microsoft Speaker - Singapore Document
Step by step guide for installing highly available System Centre 2012 Virtual Machine Manager Management server:
Step by step guide for installing highly available System Centre 2012 Virtual Machine Manager Management server: Here are the pre-requisites for a HA VMM server installation: 1. Failover clustering feature
LOAD BALANCING 2X APPLICATIONSERVER XG SECURE CLIENT GATEWAYS THROUGH MICROSOFT NETWORK LOAD BALANCING
SECURE CLIENT GATEWAYS THROUGH MICROSOFT NETWORK LOAD BALANCING Contents Introduction... 3 Network Diagram... 3 Installing NLB... 3-4 Configuring NLB... 4-8 Configuring 2X Secure Client Gateway... 9 About
Introduction to Hyper-V High- Availability with Failover Clustering
Introduction to Hyper-V High- Availability with Failover Clustering Lab Guide This lab is for anyone who wants to learn about Windows Server 2012 R2 Failover Clustering, focusing on configuration for Hyper-V
uh6 efolder BDR Guide for Veeam Page 1 of 36
efolder BDR for Veeam Hyper-V Continuity Cloud Guide Setup Continuity Cloud Import Backup Copy Job Restore Your VM uh6 efolder BDR Guide for Veeam Page 1 of 36 INTRODUCTION Thank you for choosing the efolder
Configuring a Windows 2003 Server for IAS
Configuring a Windows 2003 Server for IAS When setting up a Windows 2003 server to function as an IAS server for our demo environment we will need the server to serve several functions. First of all we
Installing and Using the vnios Trial
Installing and Using the vnios Trial The vnios Trial is a software package designed for efficient evaluation of the Infoblox vnios appliance platform. Providing the complete suite of DNS, DHCP and IPAM
SQL Server Mirroring. Introduction. Setting up the databases for Mirroring
SQL Server Mirroring The purpose of this document is to describe in detail the process of configuring Secret Server and SQL Server 2008 for a high-availability environment using Mirroring. The contents
Setting up Active Directory Domain Services
Setting up Active Directory Domain Services Tom Brett CREATING A SINGLE DOMAIN FOREST Once you have Windows Server 2008 R2 installed, it s pretty easy to create a domain you simply run the domain controller
Quick Start Guide. Version R91. English
Using StorageCraft Recovery Environment Quick Start Guide Version R91 English May 20, 2015 Agreement The purchase and use of all Software and Services is subject to the Agreement as defined in Kaseya s
Using iscsi with BackupAssist. User Guide
User Guide Contents 1. Introduction... 2 Documentation... 2 Terminology... 2 Advantages of iscsi... 2 Supported environments... 2 2. Overview... 3 About iscsi... 3 iscsi best practices with BackupAssist...
Deploying System Center 2012 R2 Configuration Manager
Deploying System Center 2012 R2 Configuration Manager This document is for informational purposes only. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, AS TO THE INFORMATION IN THIS DOCUMENT.
Configuration of a Load-Balanced and Fail-Over Merak Cluster using Windows Server 2003 Network Load Balancing
Configuration of a Load-Balanced and Fail-Over Merak Cluster using Windows Server 2003 Network Load Balancing Author: Gerrit Schunk Last Modified: 2005-07-08 Copyright SolWeb Informática S.L. All rights
Virtualizing your Datacenter
Virtualizing your Datacenter with Windows Server 2012 R2 & System Center 2012 R2 Part 2 Hands-On Lab Step-by-Step Guide For the VMs the following credentials: Username: Contoso\Administrator Password:
StarWind iscsi SAN Software: Using with Citrix XenServer
StarWind iscsi SAN Software: Using with Citrix XenServer www.starwindsoftware.com Copyright 2008-2010. All rights reserved. COPYRIGHT Copyright 2008-2010. All rights reserved. No part of this publication
Connecting to a Soundweb TM. London Network
This guide will step you through the process of configuring your laptop and HiQnet TM London Architect TM to communicate with a network of Soundweb London devices. 1 Install London Architect Install the
Creating a Domain Tree
156 Chapter 4 Installing and Managing Trees and Forests Using the Active Directory Installation Wizard, you can quickly and easily create new domains by promoting a Windows Server 2008 stand-alone server
Clustering ExtremeZ-IP 4.1
Clustering ExtremeZ-IP 4.1 Installing and Configuring ExtremeZ-IP 4.x on a Cluster Version: 1.3 Date: 10/11/05 Product Version: 4.1 Introduction This document provides instructions and background information
SAM 8.0 Backup and Restore Guide. SafeNet Integration Guide
SAM 8.0 Backup and Restore Guide SafeNet Integration Guide Revision A November 2012 SAM 8.0 Backup and Restore Guide - SafeNet Integration Guide Introduction Copyright 2012 SafeNet, Inc. All rights reserved.
Exchange Granular Restore Instructional User Guide
Exchange Granular Restore Instructional User Guide www.backup-assist.ca Contents 1. Exchange Granular Restore overview... 2 2. Creating an Exchange backup... 3 3. Exchange Granular Restore... 6 Step 1
CommandCenter Secure Gateway
CommandCenter Secure Gateway Quick Setup Guide for CC-SG Virtual Appliance - VMware, XEN, HyperV This Quick Setup Guide explains how to install and configure the CommandCenter Secure Gateway. For additional
Installing Windows Rights Management Services with Service Pack 2 Step-by- Step Guide
Installing Windows Rights Management Services with Service Pack 2 Step-by- Step Guide Microsoft Corporation Published: October 2006 Author: Brian Lich Editor: Carolyn Eller Abstract This step-by-step guide
Network System Management. Creating an Active Directory Domain
Network System Management Creating an Active Directory Domain Objectives Identify the procedures involved in the promotion of a stand-alone Windows Server to an active directory services (ADS) domain controller
Active Directory integration with CloudByte ElastiStor
Active Directory integration with CloudByte ElastiStor Prerequisite Change the time and the time zone of the Active Directory Server to the VSM time and time zone. Enabling Active Directory at VSM level
Quick Start - Virtual Server idataagent (Microsoft/Hyper-V)
Page 1 of 19 Quick Start - Virtual Server idataagent (Microsoft/Hyper-V) TABLE OF CONTENTS OVERVIEW Introduction Key Features Complete Virtual Machine Protection Granular Recovery of Virtual Machine Data
Step-By-Step Guide to Deploying Lync Server 2010 Enterprise Edition
Step-By-Step Guide to Deploying Lync Server 2010 Enterprise Edition The installation of Lync Server 2010 is a fairly task-intensive process. In this article, I will walk you through each of the tasks,
Intelligent disaster recovery. Dell DL backup to Disk Appliance powered by Symantec
Intelligent disaster recovery Dell DL backup to Disk Appliance powered by Symantec The PowerVault DL Backup to Disk Appliance Powered by Symantec Backup Exec offers the industry s only fully integrated
Bosch Video Management System High Availability with Hyper-V
Bosch Video Management System High Availability with Hyper-V en Technical Service Note Bosch Video Management System Table of contents en 3 Table of contents 1 Introduction 4 1.1 General Requirements
Step-by-Step Guide to Open-E DSS V7 Active-Active iscsi Failover
www.open-e.com 1 Step-by-Step Guide to Software Version: DSS ver. 7.00 up10 Presentation updated: June 2013 www.open-e.com 2 TO SET UP ACTIVE-ACTIVE ISCSI FAILOVER, PERFORM THE FOLLOWING STEPS: 1. Hardware
Polycom RealPresence Resource Manager System Getting Started Guide
[Type the document title] Polycom RealPresence Resource Manager System Getting Started Guide 8.0 August 2013 3725-72102-001B Polycom Document Title 1 Trademark Information POLYCOM and the names and marks
EXPRESSCLUSTER X for Windows Quick Start Guide for Microsoft SQL Server 2014. Version 1
EXPRESSCLUSTER X for Windows Quick Start Guide for Microsoft SQL Server 2014 Version 1 NEC EXPRESSCLUSTER X 3.x for Windows SQL Server 2014 Quick Start Guide Document Number ECX-MSSQL2014-QSG, Version
WhatsUp Gold v16.3 Installation and Configuration Guide
WhatsUp Gold v16.3 Installation and Configuration Guide Contents Installing and Configuring WhatsUp Gold using WhatsUp Setup Installation Overview... 1 Overview... 1 Security considerations... 2 Standard
Symantec Storage Foundation and High Availability Solutions Microsoft Clustering Solutions Guide for Microsoft SQL Server
Symantec Storage Foundation and High Availability Solutions Microsoft Clustering Solutions Guide for Microsoft SQL Server Windows 6.1 February 2014 Symantec Storage Foundation and High Availability Solutions
StarWind SMI-S Agent: Storage Provider for SCVMM April 2012
StarWind SMI-S Agent: Storage Provider for SCVMM April 2012 TRADEMARKS StarWind, StarWind Software, and the StarWind and StarWind Software logos are trademarks of StarWind Software that may be registered
AD RMS Windows Server 2008 to Windows Server 2008 R2 Migration and Upgrade Guide... 2 About this guide... 2
Contents AD RMS Windows Server 2008 to Windows Server 2008 R2 Migration and Upgrade Guide... 2 About this guide... 2 Preparing for the migration or upgrade of an AD RMS cluster... 2 Checklist: Preparing
NSi Mobile Installation Guide. Version 6.2
NSi Mobile Installation Guide Version 6.2 Revision History Version Date 1.0 October 2, 2012 2.0 September 18, 2013 2 CONTENTS TABLE OF CONTENTS PREFACE... 5 Purpose of this Document... 5 Version Compatibility...
Installing Active Directory
Installing Active Directory 119 Installing Active Directory Installing Active Directory is an easy and straightforward process as long as you planned adequately and made the necessary decisions beforehand.
HP StorageWorks Automated Storage Manager User Guide
HP StorageWorks Automated Storage Manager User Guide Part Number: 5697 0422 First edition: June 2010 Legal and notice information Copyright 2010, 2010 Hewlett-Packard Development Company, L.P. Confidential
Drobo How-To Guide. Topics. What You Will Need. Configure Windows iscsi Multipath I/O (MPIO) with Drobo iscsi SAN
Multipath I/O (MPIO) enables the use of multiple iscsi ports on a Drobo SAN to provide fault tolerance. MPIO can also boost performance of an application by load balancing traffic across multiple ports.
Configure SPLM 2012 on Windows 7 Laptop
Configure SPLM 2012 on Windows 7 Laptop 7/12/2012 SmartPlant License Manager (SPLM) requires a static IP Address on the license machine. To fulfill this requirement on laptops a virtual network adapter
F-Secure Messaging Security Gateway. Deployment Guide
F-Secure Messaging Security Gateway Deployment Guide TOC F-Secure Messaging Security Gateway Contents Chapter 1: Deploying F-Secure Messaging Security Gateway...3 1.1 The typical product deployment model...4
VT Technology Management Utilities for Hyper-V (vtutilities)
VT Technology Management Utilities for Hyper-V (vtutilities) vtutilities provide a local graphical user interface (GUI) to manage Hyper-V. Hyper-V is supported on Windows Server 2008 R2 and Windows Server
Using SMI-S for Management Automation of StarWind iscsi SAN V8 beta in System Center Virtual Machine Manager 2012 R2
Using SMI-S for Management Automation of StarWind iscsi SAN V8 beta in System Center Virtual Machine Manager 2012 R2 September 2013 TRADEMARKS StarWind, StarWind Software and the StarWind and the StarWind
Configuring Network Load Balancing with Cerberus FTP Server
Configuring Network Load Balancing with Cerberus FTP Server May 2016 Version 1.0 1 Introduction Purpose This guide will discuss how to install and configure Network Load Balancing on Windows Server 2012
WINDOWS SERVER 2008 OFFLINE SYSTEM RECOVERY USING WINDOWS SERVER BACKUP WITH NETWORKER
TECHNICAL NOTES WINDOWS SERVER 2008 OFFLINE SYSTEM RECOVERY USING WINDOWS SERVER BACKUP WITH NETWORKER NETWORKER RELEASE 7.4 SERVICE PACK 2 AND LATER TECHNICAL NOTE P/N 300-010-339 REV A02 Table of Contents