**Sample Document** Communications Submittal Package SAMPLE

Transcription

1 **Sample Document** Communications Submittal Package Date of Submission: Project Name: Communications Contractor: Contractor Contact Name: Contractor Contact Phone Number: Contractor Contact Disclaimer: The attached document is both a project and product submittal sample. Individual construction projects will require specific submittal packages engineered to meet the project requirements.

2 GigaSPEED XL Category E Plenum Cable The 2071E 4-pair GigaSPEED XL Cable meets or exceeds Category 6/Class E attenuation and NEXT requirements in ISO/IEC 11801, CENELEC EN50173 and ANSI/TIA-568-C.2. Further, these cables are ETL listed as Category 6. The 71E GigaSPEED XL cables feature a patent-pending thin and easy-to-remove bisector tape that delivers the performance benefits of more traditional fluted center members without the associated stiffness and size EBL 4/23 R1000 Copper Reference GigaSPEED X10D The 2071E 4-pair cable is composed of bare solid copper conductors insulated with Fluorinated-Ethylene-Propylene (FEP). The core of twisted pairs is jacketed with a low smoke PVC. It conforms to the low flame, low smoke requirements of the NEC. Physical Specifications: Weight: 29.1 lbs/1,000 ft (13.2 kg/304.8 m) Nominal Jacket Thickness: in (0.51 mm) Nominal Outside Diameter: in (5.69 mm) Maximum Pulling Tension: 25 lbs (11.34 kg) Operating Temperature: -4 F to.40 F (-20 C to 60 C) Gauge: 23 AWG Electrical Specifications: NVP (fastest 10 MHz): 71% Maximum DC Resistance: 7.61 Ohms/100 m Maximum DC Resistance Unbalance: 3% Mutual Capacitance at 1 khz: 5.6 nf/100 m Standards: ANSI/TIA-568-C.2 Category 6 ISO/IEC 11801: 2002 (Edition 2) Class E CENELEC EN50173: 2002 (Edition 2) Category 6 ETL: CMP Product Number Pair Count Color Length Package Material ID EBK 4/23 W Black.,000 ft (305 m) We-Tote Box EBK 4/23 R Black.,000 ft (305 m) Reel EBL 4/23 R Blue.,000 ft (305 m) Reel EBL 4/23 R Blue 3,000 ft (915 m) Reel EBL 4/23 W Blue.,000 ft (305 m) We-Tote Box ELL 4/23 R Lilac.,000 ft (305 m) Reel ELL 4/23 R Lilac 3,000 ft (915 m) Reel ELL 4/23 W Lilac.,000 ft (305 m) We-Tote Box EOR 4/23 R Orange.,000 ft (305 m) Reel EOR 4/23 R Orange 3,000 ft (915 m) Reel EOR 4/23 W Orange.,000 ft (305 m) We-Tote Box EPK 4/23 R Pink.,000 ft (305 m) Reel EPK 4/23 W Pink.,000 ft (305 m) We-Tote Box EPR 4/23 R Purple.,000 ft (305 m) Reel ERD 4/23 R Red.,000 ft (305 m) Reel ERD 4/23 R Red 3,000 ft (915 m) Reel ERD 4/23 W Red.,000 ft (305 m) We-Tote Box ESL 4/23 R Slate.,000 ft (305 m) Reel ESL 4/23 R Slate 3,000 ft (915 m) Reel ESL 4/23 W Slate.,000 ft (305 m) We-Tote Box EGN 4/23 R Spring Green 1,000 ft (305 m) Reel EGN 4/24 R Spring Green 3,000 ft (915 m) Reel EGN 4/23 W Spring Green 1,000 ft (305 m) We-Tote Box EWH 4/23 R White.,000 ft (305 m) Reel EWH 4/23 R White 3,000 ft (915 m) Reel EWH 4/23 W White...,000 ft (305 m) We-Tote Box EYL 4/23 R Yellow.,000 ft (305 m) Reel EYL 4/23 R Yellow 3,000 ft (914 m) Reel EYL 4/23 W Yellow.,000 ft (305 m) We-Tote Box GigaSPEED XL PowerSUM InstaPATCH VisiPatch Additional Copper Cu Connectivity Coaxial Cable

3 Cable Order Process Single Unit and Multi-Unit Fiber Optic Cables Fiber Types & Reference Distribution Cables Indoor/Outdoor Cables Outside Plant Cables InstaPATCH Plus G2 Fiber Connectivity Additional Fiber Connectivity Tools & Consumables 129

4 Commscope Fiber Optic Composite Cable Interlocking Armored Distribution Cable 24/24 Composite Cable Product Number: P-048-DZ-CM-FSUAQ-8W0245L024 All Dry Plant Stranded Loose Tube Armored 24/24 Composite Cable Product Number: D-048-LA-CM-F12NS-8W0245L024

5 Security 75Ω Coax Cable, Non-Plenum Series 6 (RG 6 Type) Product Number Conductor Dielectric Shields Jacket Cable Nominal Nom Nom Typical Material ID Size & Type Type Type & Coverage Type & Color & Capacitance Vel. Imp. Attenuation Packaging Options Nom DCR Nom OD Nom DCR Thickness Dimensions of Safety Rating kft/km in/mm kft/km in/mm in/mm pf/ft pf/m Prop. MHz db/100 db/100 m AWG Foam PE 92% BC Braid Flame- Black % 75Ω /10 Solid BC.180/ Ω/9.9Ω retardant.272/ Ω/21.2Ω.... PVC / NEC CM CEC CMH H 18 AWG Foam PE 92% BC Braid Low Smoke Black % 75Ω /10 Solid BC.180/ Ω/9.9Ω Zero Halogen.272/ Ω/21.2Ω...033/ NEC CM CEC CMH AWG Foam PE 92% BC Braid Flame- Black % 75Ω /10 Solid BC.180/ Ω/9.9Ω retardant.272/ Ω/21.2Ω.... PVC by and...033/ / AWG pair..... wide (7x26 )BC NEC CM CEC CMG AWG Foam PE 92% BC Braid.. PE with Black % 75Ω /10 Solid BC.180/ Ω/9.9Ω floodant.272/ Burial 6.5Ω/21.2Ω...033/ Outdoor Ω Coax Cable, Plenum Series 6 (RG 6 Type) Product Number Conductor Dielectric Shields Jacket Cable Nominal Nom Nom Typical Material ID Size & Type Type Type & Coverage Type & Color & Capacitance Vel. Imp. Attenuation Packaging Options Nom DCR Nom OD Nom DCR Thickness Dimensions of Safety Rating kft/km in/mm kft/km in/mm in/mm pf/ft pf/m Prop. MHz db/100 db/100 m 2277V.. 8 AWG Foam FEP 92% BC Braid CommFlex(V) White % 75Ω /10 Solid BC.170/ Ω/14.4Ω.016/ / Plenumax 6.5Ω/21.2Ω PVDF / NEC CMP CEC CMP Copper Reference GigaSPEED X10D GigaSPEED XL PowerSUM InstaPATCH VisiPatch Additional Copper Cu Connectivity Coaxial Cable 75Ω Coax Cable, Plenum Series 11 (RG 11 Type) Catalog Number Conductor Dielectric Shields Jacket Cable Nominal Nom Nom Typical Material ID Size & Type Type Type & Coverage Type & Color & Capacitance Vel. Imp. Attenuation Packaging Options Nom DCR Nom OD Nom DCR Thickness Dimensions of Safety Rating kft/km in/mm kft/km in/mm in/mm pf/ft pf/m Prop. MHz db/100 db/100 m 2286K.. 4 AWG Foam FEP 95% BC Braid PVDF(K) Cream % 75Ω /10 Solid BC.280/ Ω/8.2Ω.020/ / Ω/9.5Ω NEC CMP CEC CMP = 1,000 ft Reel = We Tote Box 125

6 L Type Flush-Mounted Faceplates Flush Mount Faceplates Specialty Faceplates & Mounting Frames Furniture Faceplates L Type Faceplates are flush-mounted US standard plastic faceplates. They are available in one, two, three, four, six and eight port outlet configurations. These plates will accept all CommScope UTP/FTP modular information outlets for voice and data, as well as most fiber optic adapters and couplers. The L Type plates are also compatible with CommScope s multimedia adapters and couplers. Mounting screws, label covers and label cards are included. They are available in four colors. Physical Specifications: Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic L Type Flush-Mounted Faceplates Surface Mount Boxes Zone Boxes Accessories Multimedia Adapters & Couplers International Faceplates L Type Flush-Mounted Faceplates Product Number Detailed Description H x W x D Color Material ID M10L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Black M10L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Ivory M10L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) White M10L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Gray M10LW Port Wall Mount Telephone 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Ivory (3.28 lug spacing) M10LW Port Wall Mount Telephone 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) White (3.28 lug spacing). M12L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Black M12L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Ivory M12L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) White M12L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Gray M12AP Port (Vertical Alignment) 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Ivory M12AP Port (Vertical Alignment) 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) White M13L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Black M13L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Ivory M13L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) White M13L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Gray M14L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Black M14L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Ivory M14L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) White M14L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Gray M16L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Black M16L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Ivory M16L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) White M16L Port 2.81 x 4.81 x 0.29 in (7.1 x 12.2 x 0.7 cm) Gray M28L Port (Double Gang) 4.81 x 4.61 x 0.29 in (11.7 x 12.2 x 0.7 cm) Black M28L Port (Double Gang) 4.81 x 4.61 x 0.29 in (11.7 x 12.2 x 0.7 cm) Ivory M28L Port (Double Gang) 4.81 x 4.61 x 0.29 in (11.7 x 12.2 x 0.7 cm) White M28L Port (Double Gang) 4.81 x 4.61 x 0.29 in (11.7 x 12.2 x 0.7 cm) Gray

7 GigaSPEED XL Information Outlet Copper Reference GigaSPEED X10D GigaSPEED XL VisiPatch InstaPATCH PowerSUM Cu Additional Copper Connectivity Coaxial Cable The MGS400 Information Outlet features proprietary crosstalk cancellation techniques for superior near End crosstalk (NEXT and PSNEXT) performance that provides unmatched throughput performance when installed as part of a complete GigaSPEED XL channel. The solution is guaranteed to exceed the Category 6/Class E channel specifications for ISO/IEC and TIA, even under the worst case channel configuration. Features and Benefits: Snaps into any CommScope modular faceplate, frame or surface-mount box Can be mounted either at 90 degrees (straight) or 45 degrees (angled) Angled feature eliminates the need for special faceplates Multicolored identification labels assure fast, accurate installation Snap-on icons provided in strip of three: Computer Symbol, Data and GS, also sold separately in packages of 25, product number M61A Low-profile wire cap protects against contamination and secures connections The MGS400 outlet uses either T568A or T568B wiring Physical Specifications: Dimensions: 0.8 x 0.8 x 1.2 in (2.0 x 2.0 x 3.1 cm) Universal A/B labeling Plastic Material: High-impact, flame retardant, thermoplastic Flammability Rating: UL-rated 94 V-0 Operating Temperature: 14 F to 140 F (-10 C to 60 C) Storage Temperature: -40 F to 158 F (-40 C to 70 C) Humidity: 95% (non-condensing) Contact Material & Plating: Copper alloy, Plating: Gold over nickel under plate. Insulation displacement connectors accept solid or MGS and MGS The cap kit contains 25 natural colored cable ties and 25 clear colored MGS covers with strain relief Package quantity 100; Bulk Pack includes one handheld terminating device ( ) Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold plating over 100 micro-inch (2.54 microns) nickel underplate Plug Retention Force: 30 lbs (133 N) minimum between modular plug and jack Plug Insertion Life: 750 minimum insertions of an 8-position IEC compliant plug Plug/Jack Contact Force: 100 grams minimum per contact using FCC approved plug stranded wire. Nominal Solid Conductor Diameter: in to in Insulation resistance: 500 MΩ minimum (0.40 mm to 0.64 mm) (26 to 22 AWG) Nominal Stranded Conductor Diameter: in to in (0.51 mm to 0.64 mm) (24 to 22 AWG) Insulation Size: in to in (0.76 mm to 1.17 mm) Electrical Specifications: Current rating: 1.5 A at 68 F (20 C) TIA/EIA Category: 6 Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum,. contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to exposed conductive surface UL and cul Listed Product Number Color Qty/Pkg Material ID MGS Black MGS Orange MGS Yellow MGS Green MGS White MGS Red MGS Blue MGS Violet MGS Misty Cream MGS Ivory MGS Gray MGS K (Keyed). Red MGS400 BULK-318. Blue MGS400 BULK-003. Black MGS400 BULK-262. White MGS400 BULK-246. Ivory MGS400BH-BULK Orange Handheld Terminating Device.. Black Kit: Cap with Strain Relief for MGS Outlet Clear Kit: Cap with Strain Relief for MGS Outlet 48

8 M102 Type Surface Mount Box Flush Mount Faceplates Specialty Faceplates & Mounting Frames The M102SMB Modular Surface Mount Box is a modular surface mounted duplex box designed for use with one or two CommScope modular information outlets (copper and/or fiber). It can be mounted on a flat surface using the screws or the double-sided adhesive tape provided. This unit will accept gauge cable. Physical Specifications: Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic M102SMB-B-262 Furniture Faceplates Surface Mount Boxes Zone Boxes Accessories Multimedia Adapters & Couplers International Faceplates M102 Type Surface Mount Box Product Number H x W x D Color Material ID M102SMB-B x 2.06 x 1.29 in (5.7 x 5.2 x 3.3 cm) Black M102SMB-B x 2.06 x 1.29 in (5.7 x 5.2 x 3.3 cm) Ivory M102SMB-B x 2.06 x 1.29 in (5.7 x 5.2 x 3.3 cm) White M102SMB-B x 2.06 x 1.29 in (5.7 x 5.2 x 3.3 cm) Gray M104 Type Surface Mount Box The M104SMB Modular Surface Mount Box is a modular multimedia surface mounted 4-port box designed for use with one to four modular jacks (copper and/or fiber). The M104SMB can be mounted on a flat surface using the screws or the doublesided adhesive tape provided. One mounting magnet kit is required for mounting on steel walls or furniture. The outlet openings are numbered on both the base and cover for installation and maintenance identification. The M104SMB is packaged with three color-coordinated M20AP Dust Covers/Blanks to cover any unused jacks. This unit will accept gauge cable. Physical Specifications: Plastic: High-impact, flame retardant, UL-rated 94 V-0, thermoplastic M104 Type Surface Mount Box Product Number H x W x D Color Material ID M104SMB-A x 3.92 x 1.20 in (7.2 x 10.0 x 3.0 cm) Black M104SMB-A x 3.92 x 1.20 in (7.2 x 10.0 x 3.0 cm) Ivory M104SMB-A x 3.92 x 1.20 in (7.2 x 10.0 x 3.0 cm) White M104SMB-A x 3.92 x 1.20 in (7.2 x 10.0 x 3.0 cm) Gray

9 Multimedia Adapters & Couplers Flush Mount Faceplates Specialty Faceplates & Mounting Frames Furniture Faceplates Zone Boxes Accessories Surface Mount Boxes M20/M21/M81 Dust Covers Product Number H x W x D Color Material ID M20AP x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Black M20AP x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Ivory M20AP x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) White M20AP x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Gray M20AP x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Cream M20AP x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Almond M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Black M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Orange M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Yellow M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Green M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Ivory M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) White M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Gray M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Red M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Blue M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Violet M21A x 0.75 x 0.20 in (1.8 x 1.9 x 0.05 cm) Misty Cream M (BLANK) x 0.69 x in (17 x 17 x 13 mm) Black M (BLANK) x 0.69 x in (17 x 17 x 13 mm) Almond M (BLANK) 0.69 x 0.69 x in (17 x 17 x 13 mm) Ivory M (BLANK) x 0.69 x in (17 x 17 x 13 mm) White International Faceplates 270

10 SYSTIMAX 360 GigaSPEED XL 1100GS3 Panel Copper Reference GigaSPEED X10D GigaSPEED XL Panels are available in 1U and 2U options and feature the elegant SYSTIMAX 360 design. Enhanced rear cable management features make installation easier over current cable bundling/dressing methods by reducing time and steps to tie down bundles of cable on the rear of the panels. The SYSTIMAX 360 ipatch-ready copper panels can be upgraded in the field at a later stage with the 360 ipatch Upgrade Kit. The upgrade can be performed without network disruptions, since it does not require the removal of patch cords. The SYSTIMAX 360 solution offers customers the option to deploy intelligence immediately or in phases, according to their needs and budgetary requirements. By providing a clear strategy that includes an upgradeable product line, CommScope intends to bring intelligence to the masses and raise awareness of the business benefits of intelligent infrastructures. 360 GigaSPEED XL 1100GS3 24 Port Panel SYSTIMAX 360 VisiPatch InstaPATCH PowerSUM Cu Additional Copper Connectivity Coaxial Cable Features and Benefits: Easy cable routing and bundling through improved rear cable management Supports deployment of InstaPATCH Cu pre-terminated copper solutions Available in 24 port (1U) and 48 port (2U) options Features the elegant SYSTIMAX 360 design Available in ipatch-ready versions (field upgradable to ipatch without the need to remove patch cords, meaning no network downtime) or factory assembled ipatch versions 360 GigaSPEED 1100GS3 Panels 360 GigaSPEED XL 1100GS3 48 Port Panel Product Number Detailed Description Material ID ipatch Ready ipatch GS GS3 24 Port Patch Panel Yes GS GS3 48 Port Patch Panel Yes 360-iP-1100-GS ipatch 1100GS3 24 Port Panel Yes 360-iP-1100-GS ipatch 1100GS3 48 Port Panel Yes GS3-DM GS3 Distribution Module LABEL Label Kit BEZEL-1U Bezel Kit - 1U BEZEL-2U Bezel Kit - 2U GS3-1U GS3 1U Panel Kit (Empty) GS3-2U GS3 2U Panel Kit (Empty) RCM-BM 360 Rear Cable Management (Bar Mountable) RCM-RM 360 Rear Cable Management (Rack Mountable) iP-UP-KIT ipatch Upgrade Kit for Port Panel iP-UP-KIT ipatch Upgrade Kit for Port Panel Note: ipatch Ready panels are upgradable to ipatch with the addition of the ipatch Upgrade Kits (360-iP-UP-KIT-1100). * The Rack Mountable Cable Manager ( ) can not be mounted in a cabinet. The Bar Mountable Cable Manager ( ) should be used for mounting in a cabinet. 42

11 Product Specifications VP19PNLKT Material ID: VisiPatch 19 in. 1U Rack Mount Panel Kit CHARACTERISTICS Dimensions Depth mm in Height Width Environmental Specifications mm 1.75 in mm in Operating Temperature 10 C to +60 C (+14 F to +140 F) General Specifications Product Type Panel Package, quantity 1 Regulatory Compliance/Certifications Agency RoHS 2002/95/EC ISO 9001:2000 Classification Compliant Compliant 2010 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope. All specifications are subject to change. See for the most current information. page 1 of 1 8/17/2010

12 110 Wiring Blocks The 110 Wiring Block is used to terminate cable pairs and permits a neat, organized arrangement of cables behind the block. It is a flame retardant molded plastic block with horizontal strips, each of which secures and organizes 25 cable pairs. The index strips are marked with five tip colors to help the installer locate pairs quickly. The blocks accommodate 22 through 26 AWG conductors and can be mounted directly on wall surfaces without backboards. 110 Wiring Blocks Copper Reference GigaSPEED X10D There are two types of 110 Wiring Blocks: A wiring blocks and D wiring blocks. The 110A Wiring Block is equipped with legs to provide space behind the block; also, the space on the sides can be used as a vertical jumper trough. The 110D Wiring Block is built without legs and is used where depth is restrictive. These blocks are used in conjunction with the 110C Connecting Blocks, which are ordered separately. The 110RA 12/38 Rivet Kits may be used to secure the 110 blocks without legs on to the 110 Patch Panel System backboards. The 88A2 is a molded plastic clip-on part that attaches to the legs of the 110AW2 wiring block. Physical Specifications: Electrical Specifications: Height: 25/50-Pair: 1.75 in (4.45 cm). UL and cul Listed 100-Pair: 3.59 in (9.12 cm). 300-Pair: in (27.41 cm) Width: A block, in (27.23 cm); D block, 8.5 in (21.6 cm) Depth: A block, 3.25 in (8.25 cm); D block, 1.4 in (3.6 cm) RoHS Compliant: Yes 110 Wiring Blocks (Without 110C Connecting Blocks) Product Number Pair Count Block Type Material ID 110AW A AW A DW D DW D DW D DW D Field Terminated Blocks (With 110C Connecting Blocks) Product Number Pair Count Wiring Block Connecting Block Material ID 110AA2-100FT AW X 110C AB2-100FT AW X 110C-5, 20 X 110C AC2-100FT AW X 110C-4, 28 X 110C AA2-300FT AW X 110C AB2-300FT AW X 110C-5, 60 X 110C AC2-300FT AW X 110C-4, 84 X 110C AA2-600CBM AA2-600CBM Rivet Kits Product Number Quantity Block Type Material ID 110RA-12 KIT. 2 A RA-38 KIT 38 A Retainer Product Number Detailed Description Material ID 88A2 Retainer (Retains cross-connect wires and clips onto 110AW2 blocks) GigaSPEED XL PowerSUM Additional Copper InstaPATCH Cu VisiPatch Coaxial Connectivity Cable 95

13 SYSTIMAX 360 Modular Fiber Shelves & Panels 1U, 2U & 4U The 360G2 fiber shelves are available in 1U, 2U and 4U sizes as well as sliding and fixed settings. Features and Benefits of the 1U and 2U Fiber Shelves: Bend limiters maximize space by integrating into the shelf trough Push/push-style latch on the front trough door improves access to shelf interior Unique open-floor trough design enhances access for patch cord latching and de-latching Displays intuitively-placed port labeling when door is open Features the elegant SYSTIMAX 360 design Offered in fixed and sliding options Features and Benefits of the 4U Fiber Shelves: Push/push-style latch on front and rear door improves access to shelf interior Refined cable management rings enhance access to base of modules Advanced vertical management increases flexibility Larger side fiber access allows for more fiber 360 4U Modular Panel Shelf assist (patent pending) facilitates installation and ensures proper U spacing for shelf mounting Features and Benefits of the 1U and 4U Fiber Panels: Panels are mounted in a horizontal orientation The Modular Panels offer excellent cable management and rear access, while minimizing bulk, complexity and potential restrictions to air flow By eliminating the rear enclosure found on a full shelf, the weight is substantially reduced (need to get the actual weights and calculate a percentage The Modular Panels have full-feature cable and cord management on the front The 4U Modular Panel can accommodate 16 InstaPATCH 360 Modules, allowing up to 384 fibers in 4 rack units when utilizing LC-LC patching When utilizing the 360DP MPO pass through panels, fiber density can reach 1536 fibers in 4 rack units MPO pass through panels available with 2, 4, 6, and 8 MPO adapters to accommodate various configurations Product Number Detailed Description Material ID 360G2-1U-MOD-FX 360G2 1U Fixed modular cassette shelf, accepts 4 360DM, 360DP or 360G2 modular cassettes G2-1U-MOD-SD 360G2 1U Sliding modular cassette shelf, accepts 4 360DM, 360DP or 360G2 modular cassettes G2-1U-MOD-IS 360G2 1U Fixed modular cassette shelf, accepts 4 360DM, 360DP or 360G2 modular cassettes G2-2U-MOD-FX 360G2 2U Fixed modular cassette shelf, accepts 8 360DM, 360DP or 360G2 modular cassettes G2-2U-MOD-SD 360G2 2U Sliding modular cassette shelf, accepts 8 360DM, 360DP or 360G2 modular cassettes G2-4U-MOD-FX 360G2 4U Fixed modular cassette shelf, accepts DM, 360DP or 360G2 modular cassettes G2-4U-MOD-SD 360G2 4U Sliding modular cassette shelf, accepts DM, 360DP or 360G2 modular cassettes MP-1U 360MP 1U Panel, accepts 4 360DM or 360DP components MP-1UA Angled 360MP 1U Panel Angled, accepts 4 360DM or 360DP components MP-4U 360MP 4U Panel, accepts DM or 360DP components G2 Accessories 360 1U Modular Shelf Product Number Detailed Description Material ID 360G2-1U-TROUGH 360 1U Trough Assembly Kit G2-2U-TROUGH 360 2U Trough Assembly Kit G2-4U-FLK 360 Flip Label Kit, 4U Shelf G2-1U-LABEL 360G2 Flip Label Kit, 1U Trough CMB-360MP-1U Hardware kit for 360MP-1U and 360MP-1U-ANGLED panels for mounting to L shaped equipment rail Fiber Types & Reference Distribution Cables Indoor/Outdoor Cables Outside Plant Cables InstaPATCH Plus G2 Fiber Connectivity Additional Fiber Connectivity Tools & Consumables SYSTIMAX

14 SYSTIMAX 360G2 Modular Cartridges The LC and SC, cartridges and cartridges with pigtails are ipatch Ready; thus allowing a network system to be upgraded with intelligence in the future. Features and Benefits: LC and SC, Cartridges, and Cartridges with Pigtails are ipatch Ready 360G2 Cartridges are reverse compatible with current 1000G2 and 600G2 Shelves Factory Terminated Fiber Pigtails 6 and 12 Fiber configurations for Pigtailed Cartridges Supports easy configurations for moves adds and changes No special Fiber Patch Cords Required for the ipatch Ready Field Upgrade No fiber disconnects to install ipatch Ready Field Upgrade 360G2 Modular Cartridges with Pigtails 360G2 Cartridge 6-LC-LS-AQ-Pigtails Product Number Detailed Description Material ID 360G2 Cartridge 12-LC-LS-AQ-Pigtails 360G2 Cartridge 12 LC LazrSPEED, Aqua w/pigtails, ipatch Ready G2 Cartridge 12-LC-MM-BG-Pigtails 360G2 Cartridge.2 LC OptiSPEED, Beige w/pigtails, ipatch Ready G2 Cartridge 12-LC-SM-BL-Pigtails 360G2 Cartridge 12 LC TeraSPEED, Blue w/pigtails, ipatch Ready G2 Cartridge 12-LCA-SM-GR-Pigtails 360G2 Cartridge 12 LCA TeraSPEED, Green w/pigtails, ipatch Ready G2 Cartridge 6-SC-LS-AQ-Pigtails A 360G2 Cartridge 6 SC LazrSPEED, Aqua w/pigtails A G2 Cartridge 6-SC-LS-AQ-Pigtails B 360G2 Cartridge 6 SC LazrSPEED, Aqua w/pigtails B G2 Cartridge 6-SC-MM-BG-Pigtails A 360G2 Cartridge 6 SC OptiSPEED, Beige w/pigtails A G2 Cartridge 6-SC-MM-BG-Pigtails B 360G2 Cartridge 6 SC OptiSPEED, Beige w/pigtails B G2 Cartridge 6-SC-SM-BL-Pigtails A 360G2 Cartridge 6 SC TeraSPEED, Blue w/pigtails A G2 Cartridge 6-SC-SM-BL-Pigtails B 360G2 Cartridge 6 SC TeraSPEED, Blue w/pigtails B G2 Cartridge 6-SCA-SM-GR-Pigtails A 360G2 Cartridge 6 SCA TeraSPEED, Green w/pigtails A G2 Cartridge 6-SCA-SM-GR-Pigtails B 360G2 Cartridge 6 SCA TeraSPEED, Green w/pigtails B G2 Cartridge 6-ST-LS-AQ-Pigtails A 360G2 Cartridge 6 ST LazrSPEED, Aqua w/pigtails A G2 Cartridge 6-ST-LS-AQ-Pigtails B 360G2 Cartridge 6 ST LazrSPEED, Aqua w/pigtails B G2 Cartridge 6-ST-MM-BG-Pigtails A 360G2 Cartridge 6 ST OptiSPEED, Beige w/pigtails A G2 Cartridge 6-ST-MM-BG-Pigtails B 360G2 Cartridge 6 ST OptiSPEED, Beige w/pigtails B G2 Cartridge 6-ST-SM-BL-Pigtails A 360G2 Cartridge 6 ST TeraSPEED, Blue w/pigtails A G2 Cartridge 6-ST-SM-BL-Pigtails B 360G2 Cartridge 6 ST TeraSPEED, Blue w/pigtails B G2-MOD-BLANK-4PK 360G2 Mod Panel Blank (4 Panels) Fiber Types & Reference Distribution Cables Indoor/Outdoor Cables Outside Plant Cables InstaPATCH Plus G2 Fiber Connectivity Additional Fiber Connectivity Tools & Consumables 360G2 Modular Cartridges without Pigtails Product Number Detailed Description Material ID 360G2 Cartridge 12-LC-LS-AQ 360G2 Cartridge 12 LC LazrSPEED, Aqua, ipatch Ready G2 Cartridge 12-LC-MM-BG 360G2 Cartridge 12 LC OptiSPEED, Beige, ipatch Ready G2 Cartridge 12-LC-SM-BL 360G2 Cartridge 12 LC TeraSPEED, Blue, ipatch Ready G2 Cartridge 12-LCA-SM-GR 360G2 Cartridge 12 LCA TeraSPEED, Green, ipatch Ready G2 Cartridge 6-SC-LS-AQ 360G2 Cartridge 6 SC LazrSPEED, Aqua G2 Cartridge 6-SC-MM-BG 360G2 Cartridge 6 SC OptiSPEED, Beige G2 Cartridge 6-SC-SM-BL 360G2 Cartridge 6 SC TeraSPEED, Blue G2 Cartridge 6-SCA-SM-GR 360G2 Cartridge 6 SCA TeraSPEED, Green G2 Cartridge 6-ST-LS-AQ 360G2 Cartridge 6 ST LazrSPEED, Aqua G2 Cartridge 6-ST-MM-BG 360G2 Cartridge 6 ST OptiSPEED, Beige G2 Cartridge 6-ST-SM-BL 360G2 Cartridge 6 ST TeraSPEED, Blue SYSTIMAX

15 EZ-LC Connectors Fiber Types & Reference Distribution Cables Indoor/Outdoor Cables Outside Plant Cables InstaPATCH Plus G2 Fiber Connectivity Additional Fiber Connectivity Tools & Consumables The EZ-LC Connector is a small form factor connector that is half the size of ST or SC connectors, yet has superior optical performance and reduced installation time. It uses the familiar insertion release mechanism similar to an RJ-45 plug and has a pull-proof design. The EZ-LC Connector allows engineers to design optical fiber infrastructures suited to the low loss needs of the High-Speed Data Networks. The EZ-LC Connector offers a complete connection solution with a product range designed for field termination onto 900 micron fiber, 1.6 mm fiber cordage, multimode and single-mode fiber. The Pre-Radius LC connector is the recommended connector for all SYSTIMAX installations. The Pre-Radius LC connector provides for faster installation, uses less polishing papers than the flat end-face connector and yields superior end-face geometry. The superior insertion loss performance offered by the LC connector makes it the ideal connector for gigabit applications including all proposed 10 gigabit Ethernet specifications for multimode and single-mode fiber. The 0.9 mm fiber connector is designed to allow for the simple and speedy termination of the connector onto 0.9 mm fiber. So, whether terminating a cable into a patch panel, connection box or outlet, the LC connector offers the best-in-class solution. The D upgrade kit ( ), used in conjunction with tool kits 1032B5 or.032f1, provides the necessary tools to terminate LC connectors to 0.9 mm buffered fiber or 1.6 mm cordage. For termination to 0.9 mm buffered fiber only, the D upgrade kit ( ) may be used with the 1032B5 or 1032F1 kits. The 1032H mini tool kit ( ) may be used to terminate LC connectors to 0.9 mm buffered fiber using the EZ anaerobic adhesive method. Additionally, the appropriate consumable kits are required to complete terminations. The Pre-Radiused LC and the flat end-face LC use two different consumable kits and instructions. Please refer to the Fiber Optic connector consumable kit section in the catalog for details or reference the instruction sheets for the appropriate connector from the SYSTIMAX Solutions Web Site Instruction Sheets. Optical Specifications: Multimode: Average Loss: 0.1 db Standard deviation 0.1 db Physical Specifications: Length: in (3.2 cm) Tip: Ceramic LC Series Connectors Top to bottom: cordage simplex, cordage duplex, BTW connector Single-mode: Average Loss: 0.2 db Standard deviation 0.1 db Insertion Loss Change: <0.3 db Mating durability for 500 reconnect.. <0.3 db Temperature stability -40 F to 167 F ( 40 C to 75 C) Cable Retention: 2 lbs for buffered fiber, 10 lbs for 1.6 mm cordage Product Number Detailed Description Fiber Type Color Qty/Pkg Material ID MFC-LCR-09-BG BTW LC Connector, Pre-radiused, for 0.9mm Fiber MM Beige MFC-LCR-09-BG-100-BULK-PACK BTW LC Connector, Pre-radiused, for 0.9mm Fiber MM Beige SFC-LCR-09-BL BTW LC Connector, Pre-radiused, for 0.9mm Fiber SM Blue SFC-LCR-09-BL-100-BULK-PACK BTW LC Connector, Pre-radiused, for 0.9mm Fiber SM Blue MFC-LCR-16-BG LC Connector, Pre-radiused, Simplex, for 1.6mm Cordage MM Beige MFC-LCR-16-BG-100-BULK-PACK LC Connector, Pre-radiused, Simplex, for 1.6mm Cordage MM Beige MFC-LCR-30-BG LC Connector, Pre-radiused, Simplex, for 3.0mm Cordage MM Beige MFC-LCR-30-BG-100-BULK-PACK LC Connector, Pre-radiused, Simplex, for 3.0mm Cordage MM Beige SFC-LCR-16-BL LC Connector, Pre-radiused, Simplex, for 1.6mm Cordage SM Blue SFC-LCR-16-BL-100-BULK-PACK LC Connector, Pre-radiused, Simplex, for 1.6mm Cordage SM Blue SFC-LCR-30-BL LC Connector, Pre-radiused, Simplex, for 3.0mm Cordage SM Blue SFC-LCR-30-BL-100-BULK-PACK LC Connector, Pre-radiused, Simplex, for 3.0mm Cordage SM Blue MDC-LCR-16-BG LC Connector, Pre-radiused, Duplex, for 1.6mm Cordage MM Beige MDC-LCR-16-BG-100-BULK-PACK LC Connector, Pre-radiused, Duplex, for 1.6mm Cordage MM Beige MDC-LCR-30-BG LC Connector, Pre-radiused, Duplex, for 3.0mm Cordage MM Beige MDC-LCR-30-BG-100-BULK-PACK LC Connector, Pre-radiused, Duplex, for 3.0mm Cordage MM Beige SDC-LCR-16-BL LC Connector, Pre-radiused, Duplex, for 1.6mm Cordage SM Blue SDC-LCR-16-BL-100-BULK-PACK LC Connector, Pre-radiused, Duplex, for 1.6mm Cordage SM Blue SDC-LCR-30-BL LC Connector, Pre-radiused, Duplex, for 3.0mm Cordage SM Blue SDC-LCR-30-BL-100-BULK-PACK LC Connector, Pre-radiused, Duplex, for 3.0mm Cordage SM Blue

16 Multipair Protector Panel (190 Type) The 190 Type Multipair Protector Panel provides indoor station protection for exposed lines where the cross-connect field is separated from the protector panels at building entrance terminals. The protector panel consists of a metal housing containing mountings for 3B-, 3C-, 4B-, or 4C-Series Protector Units (sold separately). It also includes a 25 ft (7.62 m), 26 AWG stub cable that serves as a fusible link, a 24 AWG terminating cable and two connectors for external ground connections. The internal wiring design prevents protector bypass. A cable pass-through feature allows for side-by-side and top-to-bottom installation. Physical Specifications: Height: 50-pair: 13 in (33.0 cm).. 00-pair: 24 in (61.0 cm) Width: 4 in (10.2 cm) Depth: 2.75 in (6.99 cm) Product Number Pair Count Material ID 190A A A1-50 Copper Reference GigaSPEED X10D GigaSPEED XL PowerSUM Additional Copper InstaPATCH Cu VisiPatch Coaxial Connectivity Cable 105

17 The CommScope 4-Type Gas Discharge Tube with PTC (positive temperature coefficient) 5-Pin Protector Module provides high performance and long life for both overvoltage and over-current protection of voice-band and high-speed data circuits in controlled environments including central offices. Overvoltage protection is provided by a 3-element as discharge tube rated at 350V nominal with a fall-safe device, which provided insured protection in case of power cross. The gas discharge tube technology has low capacitance, high energy handling capability, and extreme temperature resiliency. Sneak current protection is provided by two self-resetting 2.2 ohm PTC resistors with a hold current of 180 ma. The PTC resistors are advantageous compared to heat coils they are self-resetting and do not require replacement for each operation. The low resistance of the PTC resistors makes them ideal for a multitude of xdsl applications. The CommScope 4-type Gas Discharge Tube with PTC 5-Pin Protector Module meets the Cat 5 high-speed requirement form GR-974, Issue 3, across the 100 MHz frequency spectrum except for return loss between the frequencies of 52.5 and 62.5 MH at 65 C. The protectors are listed to UL497. This product is an economical, reliable, and effective choice for overvoltage and over-current protection of copper pair circuits. Features culus listed (US and Canada) per UL 497 Compliant to Telcordia GR-974, Issue 3 Balanced 3-element gas discharge tube with fail-safe Gas discharge tube is UL recognized without backup gap Fail-safe device ensures superior protection with fast-acting, highly-reliable response to thermal overload conditions Self-resetting sneak current protection (PTCs) Low capacitance (less than 10 pf) and low resistance (2.2 ohm PTCs) make this protector ideal for high-speed networks Test access option How to Order Protector Code Description Material ID 4R1AN element gas tube (350V), resettable 2.2 ohm PTCs, black housing, no test access R3AN element gas tube (350V), resettable 2.2 ohm PTCs, red housing, no test access

18 PREMISES COPPER PREMISES FIBER OSP FIBER OSP COMPOSITE CENTRAL OFFICE COPPER RDUP/RUS OSP COPPER BELL OSP COPPER OSP COPPER WIRE CANADIAN OSP COPPER TECHNICAL INFO AR Series Riser ARAM/ARMM Pair Count Conductor Specifications Available in 25-pair up to 2,400-pair Solid annealed copper AWG (mm) Available in 22 (0.64) and 24 (0.51) Insulation Shield Jacket Characteristic Impedance (Ohms) 100 ± 15 Nominal Velocity of Propagation (%) Package Performance Compliance NRTL Programs Solid Annealed Copper Conductor Polyethylene Foam with PVC Skin Insulation Non-hygroscopic Dielectric Tape Corrugated Aluminum Tape Shield Flame Retardant and Abrasion Resistant PVC Jacket Polyethylene foam with PVC skin Corrugated 8 mil aluminum tape Gray, flame retardant and abrasion resistant PVC 60 Cut to length UL 444 UL 1666 Telcordia GR-111 ANSI/TIA-568-C.2 RoHS-compliant UL Listed CMR Product Description The AR Series Riser Cables are intended for vertical and horizontal distribution in commercial buildings and meet Category 3 electrical specifications. This includes all applications except those in plenums. These cables have a fireretardant PVC jacket and have been listed as CMR rated, in accordance with the National Electrical Code. AR cables are color coded to match standard Outside Plant (OSP) cable designs. The cable consists of solid soft bare copper that s insulated with foam polyethylene and a skin of PVC. Cores through 900-pair are color coded to match the standard PIC color code. Cables 1,200-pair and larger have a Mirror Image color code. Spare pairs are offered in cables of 1,200-pair and larger. An alvyn sheath is applied overall. The alvyn sheath consists of a 8 mil aluminum tape applied longitudinally and bonded to a gray PVC outer jacket. Applications Riser shafts without using conduits 4 Mbps token ring Analog voice 10BASE-T ethernet Features CMR rating Shielded design Part Numbers and Physical Characteristics Part Number Product Code Pair Count AWG (mm) Nominal Diameter in (mm) Approx. Weight lbs/kft (kg/km) ARAM (0.64) 0.61 (15) 203 (303) ARAM (0.64) 0.77 (20) 347 (517) ARAM (0.64) 1.05 (27) 644 (960) ARAM (0.64) 1.41 (36) 1,184 (1,766) ARAM (0.64) 1.68 (43) 1,699 (2,533) ARAM (0.64) 1.94 (49) 2,200 (3,280) ARAM (0.64) 2.30 (58) 3,196 (4,766) ARMM (0.51) 0.51 (13) 146 (218) ARMM (0.51) 0.64 (16) 241 (360) ARMM (0.51) 0.89 (23) 447 (667) ARMM (0.51) 1.02 (26) 618 (922) ARMM (0.51) 1.14 (29) 788 (1,175) ARMM (0.51) 1.35 (34) 1,129 (1,684) ARMM (0.51) 1.53 (39) 1,427 (2,128) ARMM (0.51) 1.85 (47) 2,106 (3,140) ARMM (0.51) 2.20 (56) 3,060 (4,563) ARMM 1, (0.51) 2.50 (63) 4,008 (5,977) ARMM 1, (0.51) 2.80 (71) 5,013 (7,476) ARMM 1, (0.51) 3.05 (77) 5,958 (8,884) ARMM 2, (0.51) 3.30 (84) 6,908 (10,302) ARMM 2, (0.51) 3.52 (89) 7,852 (11,709) A-46 Toll Free Fax SuperiorEssex.com/Comm Benefits Meets NFPA code for riser applications Provides EMI/RFI shielding Rev 7/10 Ed 10.2

19 PREMISES COPPER PREMISES FIBER OSP FIBER OSP COMPOSITE CENTRAL OFFICE COPPER RDUP/RUS OSP COPPER BELL OSP COPPER OSP COPPER WIRE CANADIAN OSP COPPER TECHNICAL INFO SEALPIC FSF (RDUP PE-89) Conductor F-8 Specifications Solid annealed copper AWG (mm) Available in 19 (0.90), 22 (0.64), 24 (0.51) and 26 (0.40) Insulation Twisted Pairs 25-Pair Core > 25-Pair Core Filling Compound Core Wrap Shield Jacket Jacket Marking Standards Compliance Dual insulation consisting of an inner layer of foamed, natural polyolefin over which is applied a solid (skin) layer of polyolefin colored in accordance with industry standards Individual insulated conductors; twisted into pairs with varying lay lengths; specific color combinations provide pair identification Pairs are assembled into a cylindrical core Cables larger than 25-pair are assembled into units, which are then used to assemble the core; units are identifiable using color-coded binders 80 C ETPR compound, completely filling the interstices between the pairs and under the core wrap Non-hygroscopic, dielectric tape applied over the core Corrugated, copolymer coated, 8 mil aluminum tape applied longitudinally with an overlap; flooded shield interfaces Black, polyethylene Identifying information includes a telephone handset, cable code, pair count, AWG, date of manufacture and sequential length markings at 2 foot intervals ANSI/ICEA S RDUP 7 CFR (PE-89) RoHS-compliant Electrical Specifications Capacitance Unbalance Pair to 1 khz Number of Pairs Average Mutual 1000 Hz nf/mile (nf/km) Maximum Individual pf/kft (pf/km) Maximum RMS pf/kft (pf/km) Maximum Individual pf/kft (pf/km) 12 or less 83 ± 7 (52 ± 4) 80 (262) (2,625) - Over ± 4 (52 ± 2) 80 (262) 25 (82) 800 (2,625) 175 (574) Minimum Insulation 68 F (20 C) gigohm-mile (gigohm-km) Maximum Average Attenuation* F (20 C) db/kft (db/km) Maximum Conductor 68 F (20 C) Ohms/sheath mile (km) DC Resistance Unbalance Maximum % Toll Free Fax SuperiorEssex.com/Comm Capacitance Unbalance Pair to 1 khz Maximum Average pf/kft (pf/km) Dielectric Strength DC Potential Volts Conductor Size AWG (mm) Average Individual Pair Conductor to Conductor Conductor to Shield 19 (0.90) 1.0 (1.6) 3.2 (10.5) 45.0 (28.0) ,500 10, (0.64) 1.0 (1.6) 4.5 (14.8) 91.0 (56.5) ,600 10, (0.51) 1.0 (1.6) 5.6 (18.4) (89.5) ,000 10, (0.40) 1.0 (1.6) 7.0 (23.3) (144.0) ,400 10,000 *For cables with 12-pair or less, the maximum average attenuation may be increased by 10% over the values shown. Minimum Near End Crosstalk 772 khz PSWUNEXT Mean (db) 47 PSWUNEXT Worst Pair (db) 42 Minimum Far End Crosstalk 772 khz Conductor Size (AWG) PSELFEXT Mean (db/kft) PSELFEXT Worst Pair (db/kft) Product Description SEALPIC -FSF Cables are designed for low risk direct burial or duct applications where protection from moisture is required and aluminum shielding is desired. SEALPIC-FSF may be used aerially, but must be attached to a support strand. Applications Low risk direct burial Underground conduit Lashed aerial Features Twisted into pairs with varying lay lengths Core wrap Filled core Fully flooded shield interfaces Black, polyethylene jacket Benefits Minimizes crosstalk Provides thermal protection Moisture resistant Inhibits corrosion and water migration Provides a tough, protective covering designed to withstand exposure to direct sunlight, atmospheric temperature changes and stresses expected in standard installations Rev 6/10 Ed 10.1

20 Part Number Pair Count AWG (mm) Part Numbers and Physical Characteristics Nominal Diameter in (mm) Approx. Weight lbs/kft (kg/km) Standard Length ft (m) SEALPIC FSF (RDUP PE-89) Approx. Shipping Weight lbs (kg) Reel Size F x T x D in (0.90) 0.49 (12) 120 (180) 5,000 (1,524) 710 (320) 44 x 18 x (0.90) 0.59 (15) 190 (285) 5,000 (1,524) 1,115 (505) 46 x 25 x (0.90) 0.78 (20) 355 (530) 5,000 (1,524) 1,980 (895) 52 x 25 x (0.90) 1.03 (26) 655 (975) 5,000 (1,524) 3,565 (1,615) 62 x 30 x (0.90) 1.37 (35) 1,225 (1,825) 2,500 (762) 3,430 (1,555) 65 x 30 x (0.64) 0.39 (9.9) 70 (105) 5,000 (1,524) 415 (190) 36 x 18 x (0.64) 0.47 (12) 115 (170) 5,000 (1,524) 685 (310) 44 x 18 x (0.64) 0.60 (15) 200 (300) 5,000 (1,524) 1,165 (530) 46 x 25 x (0.64) 0.77 (20) 350 (520) 5,000 (1,524) 1,955 (885) 52 x 25 x (0.64) 1.02 (26) 650 (965) 5,000 (1,524) 3,540 (1,605) 62 x 30 x (0.64) 1.38 (35) 1,225 (1,825) 2,500 (762) 3,350 (1,520) 62 x 30 x (0.64) 1.65 (42) 1,800 (2,680) 1,250 (381) 2,495 (1,130) 58 x 25 x (0.64) 1.88 (48) 2,365 (3,520) 1,250 (381) 3,245 (1,470) 62 x 30 x (0.64) 2.28 (58) 3,505 (5,215) 1,250 (381) 4,995 (2,265) 72 x 35 x (0.64) 2.76 (70) 5,195 (7,730) 1,250 (381) 7,290 (3,305) 84 x 40 x , (0.64) 3.14 (80) 6,845 (10,185) 1,250 (381) 9,730 (4,415) 96 x 40 x , (0.64) 3.51 (89) 8,520 (12,680) 1,000 (305) 9,695 (4,400) 96 x 40 x (0.51) 0.36 (9.1) 55 (80) 5,000 (1,524) 320 (145) 36 x 18 x (0.51) 0.42 (11) 85 (125) 5,000 (1,524) 490 (220) 36 x 18 x (0.51) 0.52 (13) 140 (210) 5,000 (1,524) 810 (365) 44 x 18 x (0.51) 0.66 (17) 240 (355) 5,000 (1,524) 1,365 (620) 46 x 25 x (0.51) 0.85 (22) 430 (640) 5,000 (1,524) 2,395 (1,085) 58 x 25 x (0.51) 1.14 (29) 810 (1,205) 5,000 (1,524) 4,665 (2,115) 72 x 35 x (0.51) 1.37 (35) 1,180 (1,755) 2,500 (762) 3,320 (1,505) 65 x 30 x (0.51) 1.55 (39) 1,545 (2,300) 2,500 (762) 4,475 (2,030) 72 x 35 x (0.51) 1.88 (48) 2,285 (3,400) 1,250 (381) 3,145 (1,425) 62 x 30 x (0.51) 2.25 (57) 3,350 (4,985) 1,250 (381) 4,800 (2,180) 72 x 35 x , (0.51) 2.57 (65) 4,420 (6,580) 1,250 (381) 6,225 (2,825) 78 x 40 x , (0.51) 2.86 (73) 5,490 (8,170) 1,000 (305) 6,190 (2,805) 78 x 40 x , (0.51) 3.12 (79) 6,560 (9,765) 1,000 (305) 7,355 (3,335) 84 x 40 x , (0.51) 3.40 (86) 7,690 (11,445) 1,000 (305) 8,865 (4,020) 96 x 40 x , (0.51) 3.59 (91) 8,695 (12,940) 1,000 (305) 9,870 (4,475) 96 x 40 x (0.40) 0.44 (11) 100 (150) 5,000 (1,524) 565 (255) 36 x 18 x (0.40) 0.55 (14) 165 (245) 5,000 (1,524) 990 (450) 46 x 25 x (0.40) 0.71 (18) 290 (430) 5,000 (1,524) 1,655 (750) 52 x 25 x (0.40) 0.94 (24) 535 (795) 5,000 (1,524) 2,965 (1,345) 62 x 30 x (0.40) 1.09 (28) 755 (1,125) 5,000 (1,524) 4,390 (1,990) 72 x 35 x (0.40) 1.25 (32) 995 (1,480) 2,500 (762) 2,735 (1,240) 58 x 25 x (0.40) 1.49 (38) 1,455 (2,165) 2,500 (762) 4,250 (1,930) 72 x 35 x (0.40) 1.78 (45) 2,120 (3,155) 1,250 (381) 3,020 (1,370) 65 x 30 x , (0.40) 2.03 (52) 2,785 (4,145) 1,250 (381) 4,095 (1,860) 72 x 35 x , (0.40) 2.28 (58) 3,480 (5,180) 1,250 (381) 4,965 (2,250) 72 x 35 x , (0.40) 2.48 (63) 4,150 (6,175) 1,250 (381) 5,885 (2,670) 78 x 40 x , (0.40) 2.86 (73) 5,515 (8,210) 1,250 (381) 8,070 (3,660) 96 x 40 x , (0.40) 3.45 (88) 8,165 (12,150) 1,000 (305) 9,340 (4,235) 96 x 40 x 48 Product FAQs for OSP copper cables are available online: CANADIAN OSP COPPER OSP COPPER WIRE BELL OSP COPPER RDUP/RUS OSP COPPER CENTRAL OFFICE COPPER OSP COMPOSITE OSP FIBER PREMISES FIBER PREMISES COPPER Rev 6/10 Ed 10.1 Toll Free Fax SuperiorEssex.com/Comm F-9 TECHNICAL INFO

21 Product Information Sheet STANDARD RACK, 6 DEEP Features 6 deep upright mounting channels for MDF, IDF and other high-capacity distribution frame applications. The additional rack depth provides extra room for high-density equipment and cable needs. High strength aluminum construction steel top angles on painted racks Supplied with (2) top angles for additional strength EIA-310-D Standard Universal 5/8-5/8-1/2 alternating hole pattern offers greater mounting flexibility and is fully compatible with conventional Wide 1 1/4-1/2 alternating hole patterns RMU marks simplify equipment installation High-strength, roll-formed threaded mounting holes Ships unassembled and individually packaged Includes assembly hardware and (50) pilot point #12-24 mounting screws with combination Phillips/Straight heads Weight capacity 1000 lb (weight must be evenly distributed and rack must be properly secured to the floor ) UL Listed FLANGE EDGE TO FLANGE EDGE A MOUNTING HOLE TO MOUNTING HOLE B Part Number Description X03 19 W x 7 H, 45 RMU 38 lb X03 23 W x 7 H, 45 RMU 42 lb X03 35 W x 7 H, 45 RMU 52 lb X=color; 1=Gray, 2=White, 5=Clear, 7=Black Shipping Weight (457.2 mm) 6.00 (152.4 mm) C P/N (35 W) Shown The 6 Deep Standard Rack is the high-capacity frame that is designed for use with cabling sections and is the basic frame around which the XLBET/MDF frames are developed. Rack Dimensions Dimension 19 EIA Rack 23 EIA Rack 35 EIA Rack A (451.9 mm) (554.5 mm) (858.3 mm) B (465.2 mm) (566.9 mm) (871.7 mm) C (516. mm) (617.7 mm) (922.5 mm) in U.S. & Canada All products quoted are subject to availability base on manufacturing capacity and shipping dates should be considered estimates only. While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reserves the right to change information and descriptions of listed services and products Chatsworth Products Inc. All rights reserved. CPI and MegaFrame are registered trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies. 5/02/GT Rev. 2 05/07/NB

22 GLOBAL VERTICAL CABLING SECTION Select the product that best fits your needs. All selections include a door/cover and mounting hardware. Accessories for the Global Vertical Cabling Section Purchase accessories for the Global Vertical Cabling Section to grow with or adapt to your changing needs. A set of seven Cable Rings can be attached to the back of a single-sided unit to organize rear wires for a neat, professional installation. The rings provide the functionality of a double-sided cable management system -- at considerable savings. (Bottom right illustration depicts wide cable rings.) New: 2 -Diameter Fiber Management Spools. Measuring 2" outside diameter, the spools provide additional cable support and proper bending radii for more efficient data transmission. Easily mounted at desired intervals to 6"-wide cabling section. Available in sets of two or six. Part Number 2"-Diameter Fiber Management Spools Description Shipping Weight For GVCS, package of 2 2 lb For GVCS, package of 6 3 lb 2003 Chatsworth Products, Inc. All rights reserved. CPI is a registered trademark of Chatsworth Products, Inc. Form No. MKT CH rev. 11/03

23 Frequently Product Information Asked Questions Sheet UNIVERSAL HORIZONTAL CABLE MANAGER Provides an attractive and highly functional horizontal pathway for patch cords and multimedia applications using coax, copper and fiber optic cables. Patch cords may also be routed to the back of the rack through the flanged pass-through slot. After routing the cables or cords, simply snap-on the hinged cover for a clean, professional appearance. Single-sided designs manage patch cords. Double-sided designs manage patch cords and premise cables. Use with CPI s Vertical cabling sections to create a complete cable management system. Patented cable guide fingers ensure proper cable bend and withstand wear. Snap-on, hinged covers create a professional look Part Number Cable Fill Cable Fill (50%) 19" 23" Area Cat 5e Cat 6 Cat 6a (2774.2) (7541.9) ( ) Double-Sided Cable Manager (3632.3) Shipping Part Number Description Weight (9864.5) "W x 11.73"D x 1 RMU, Black 5 lb ( ) "W x 11.73"D x 1 RMU, Black 6 lb (2735.5) "W x 11.73"D x 2 RMU, Black 6 lb (Front/Rear) (Front/Rear) 6.01 (3877.4) "W x 11.73"D x 2 RMU, Black 7 lb (7522.6) "W x 11.73"D x 3 RMU, Black 6 lb (Front/Rear) (Front/Rear) ( ) "W x 11.73"D x 3 RMU, Black 7 lb (Front/Rear) (Front/Rear) Part Number 19.08( ) ( ) Dimensions 19" 23" A a B b (43.9) 1.02 (25.9) (88.4) 2.77 (70.4) (132.8) 4.52 (114.8) (43.9) 1.02 (25.9) (88.4) 2.77 (70.4) (132.8) 4.52 (114.8) (43.9) 1.00 (25.4) 1.67 (42.4) 0.85 (21.6) (87.9) 2.75 (69.9) 3.42 (86.9) 2.60 (66.0) (132.8) 4.50 (114.3) 5.17 (131.3) 4.44 (112.8) Part Number in U.S. & Canada Single-Sided Cable Manager Description Shipping Weight "W x 4.96"D x 1 RMU, Black 2 lb "W x 4.96"D x 1 RMU, Black 3 lb "W x 5.14"D x 2 RMU, Black 3 lb "W x 5.14"D x 2 RMU, Black 4 lb "W x 5.14"D x 3 RMU, Black 4 lb "W x 5.14"D x 3 RMU, Black 5 lb * 19"W x 6.26 D x 1 RMU, Black 3 lb * 23"W x 6.26 D x 1 RMU, Black 3 lb * 19"W x 6.44"D x 2 RMU, Black 4 lb * 23"W x 6.44"D x 2 RMU, Black 5 lb * 19"W x 6.44"D x 3 RMU, Black 5 lb * 23"W x 6.44"D x 3 RMU, Black 6 lb Note: The deep panel is used when Double-Sided MCS Master Cabling Sections are center-mounted on 3 D Racks Chatsworth Products, Inc. Rev. 09/06/NB

24 CABLE RUNWAY PRODUCTS Runway In A Box Cable runway is individually packaged to simplify shipping. Individual packaging is utilized for all Series Universal Cable Runway, Series TELCO-Style Cable Runway and Series UL Classified Cable Runway. Individual pieces of runway are packaged in a custom width box of 32 ECT cardboard and banded on our strapping machine. Each box is labeled with the part number and product description indicating color and width. Pallets are designed to support the full length and width of multiple quantities of runway. Runway is neatly stacked in two or three columns, fully stretch-wrapped and banded to the pallet to eliminate movement during shipping. Universal Cable Runway Our most popular cable runway is designed for value conscious customers. The Universal Cable Runway offers the industry standard features you ve come to expect. With the runway supported every 5 (1.5 m), maximum load with minimal deflection is 132 lb/ft (59.9 kg). Made of 3/8 x 1-1/2 x.065 (9.53 mm x 38 mm x 1.65 mm) wall rectangular steel tubing Cross members welded at 12 (300 mm) intervals Individually boxed to prevent scratches and damage Standard length is /2 /119.5 (3035 mm) Installation Best Practices includes Runway Elevation Kit (page 6-19) Part Number/Color Shipping Width (Dim. A)* Weight in (mm) Gray White Black lb (kg) (100) 18 (8.2) (150) 19 (8.6) (230) 20 (9.1) (300) 25 (11.3) (380) 27 (12.2) (460) 29 (13.2) (610) 32 (14.5) (760) 35 (15.7) (910) 38 (17.2) A 6-16

25 Product Information Sheet CABLE RUNWAY ELEVATION KIT For supporting Cable Runway above a continuous row of CPI racks or cabinets of varying height. It also provides additional space between the tops of the racks or cabinets and the cable runway, which can be used to create smoother vertical to horizontal transition of cables. Two ranges of incremental elevation: 2 to 3 or 4 to 6 Can be mounted in both perpendicular and parallel orientation Rack kit includes a single pair of brackets and assembly hardware Rack kits attach to the top of the rack with a Rack-To-Runway Mounting Plate (P/N or 12121, sold separately) Cabinet kits include two pairs of brackets and assembly hardware Cabinet kits attach directly to the top of the cabinet Rack 2, 2.5, or 3 High Elevation Shipping Weight Cabinet Shipping Weight Color lb lb Gray lb lb White lb lb Black lb lb Gold 4, 5, or 6 High Elevation Shipping Rack Cabinet Shipping Shipping Cabinet Finish Color Weight Weight lb lb Gray lb lb White lb lb Black lb lb Gold Note: Gold (-0XX) and White (-2XX) kits include gold-colored hardware. Gray (-1XX) and Black (-7XX) kits include black-colored hardware. Elevation Kit on Cabinet Elevation Kit parallel on Rack Wall-Mounted Option Elevation Kit perpendicular on Rack in U.S. & Canada Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, Saf-T-Grip, Seismic Frame, SlimFrame and MegaFrame are federally registered trademarks of Chatsworth Products, Inc. Cube-iT Plus, Evolution, OnTrac, QuadraRack, Simply Efficient and TeraFrame are trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies. Rev.3 05/09

26 Frequently Product Information Asked Questions Sheet SPLICE KITS (BUTT & JUNCTION) Butt-Splice Kit Kit contains material to butt-splice 1-1/2" cable runway. Fits both solid and tubular steel 1 1/2" x 3/8" and 2 x 3/8 cable runway. Kit consists of: 4 each splice plates 2 each 3/8-16 trimmed head bolts 2 each 3/8-16 hex nuts 2 each 3/8" split lock washers Part Number X01 Description Butt-Splice Kit - 1 1/2 x 3/8 Stringer Shipping Weight 1 lb X02 Butt-Splice Kit, 2 stringer 1 lb X01 U.L. Classified Kit 1 lb * Note: X=color over zinc: 0=Gold, 7=Black Junction-Splice Kit Used to create a 90 degree junction splice with all types of 1-1/2" x 3/8" or 2 x 3/8 cable runway. Kit consists of: 4 each corner clamp plates 2 each 3/8-16 x 1 3/8" trimmed head bolts 2 each 3/8-16 hex nuts 2 each 3/8 split lock washers Part Number X01 Description Junction-Splice Kit 1 1/2 x 3/8 Stringer Shipping Weight 1 lb X02 Junction-Splice Kit 2 x 3/8 Stringer 1 lb X01 * Note: X=color over zinc: 0=Gold, 7=Black U.L. Classified Junction Kit 1 lb in US & Canada Chatsworth Products, Inc. 5/02/GT

27 Frequently Product Information Asked Questions Sheet Sheet WALL ANGLE SUPPORT KIT, CABLE RUNWAY 2" x 2" x 3/16" steel support angle is cut and drilled for wall mounting specific widths of cable runway. Kit consists of: 1 each wall angle 2 each 5/16-18 x 2 1/4" J-bolts 2 each 5/16-18 hex nuts 2 each 5/16 lock washers Wall Angle Support Kit Color Gray Computer White Black Runway Width Dim. A Dim. B Dim. C X XX in US & Canada Chatsworth Products, Inc. 5/02/GT

28 Frequently Product Information Asked Questions Sheet Sheet TRIANGULAR SUPPORT BRACKET, ALUMINUM Triangular welded bracket provides wall support for cable runway. Made of 1/4" x 2" 6063-T5 aluminum bar. Weight capacity is 100 lb. Kit consists of: 1 each triangular bracket 2 each 5/16-18 x 2 1/4" J-bolts 2 each 5/16-18 hex nuts 2 each 5/16 lock washers Part Number Runway Widths Color Gray Gray Gray White White White Black Black Black Shipping Weight 2 lb 3 lb 3 lb 2 lb 3 lb 3 lb 2 lb 3 lb 3 lb in US & Canada Chatsworth Products, Inc. 5/02/GT

29 Frequently Product Information Asked Questions Sheet RACK-TO-RUNWAY MOUNTING PLATE USING J-BOLTS Secures cable runway to the top of Standard and Universal equipment racks. J-Bolts hook under the mounting plate to secure the plate to the rack s top angles. Mounts either parallel or perpendicular. For proper attachment of 6" runway, use top bars (13045 Series) rather than top angles on your rack. Various sizes accommodate our popular cable runway widths and rack depths Kit consists of: 1 mounting plate 4 J-Bolts, 5/16-18 x 2-1/4 4 hex nuts, 5/ split lock washers, 5/16 Parallel Mounting on Rack with 3"D Channel Perpendicular Mounting on Rack with 6"D Channel Mounting Plate Using Hat-Shaped Bracket Part Number Channel Width Runway Width Plate Material Shipping Weight P/N X X04 4" Steel 4 lb X08 5" to 8" Steel 5 lb X12 3" 9" to 12" Steel 5 lb X18 15" to 18" Steel 7 lb P/N X X24 20" to 24" Aluminum 4 lb X09 5" to 9" Aluminum 5 lb Note: X24 and X24 mounting plates add 1.25 to height of rack X12 10" to 12" Aluminum 5 lb 6" X18 15" to 18" Aluminum 7 lb X24 20" to 24" Aluminum 5 lb Note (X) denotes finish color: (-1) for Gray, (-2) for White or (-7) for Black in US & Canada Chatsworth Products, Inc. Rev 1/04

30 Product Cut Sheet VERTICAL WALL BRACKETS Used to secure cable runway with 1-1/2" x 3/8" (38 mm x 9.53 mm) stringers to a wall. Material is 3/16" x 1-1/2" (4.7 mm x 38 mm) steel 5/16 (7.9 mm) diameter mounting hole Sold in pairs Finish is gold chem film over zinc plate or black Wall mounting hardware not included Part Number Description Shipping Weight lb (kg) Runway Wall Brackets (Pair), Gold 1 (0.5) Runway Wall Brackets (Pair), Black 1 (0.5) in U.S. & Canada Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, Saf-T-Grip, Seismic Frame, SlimFrame, MegaFrame and TeraFrame are federally registered trademarks of Chatsworth Products, Inc. Cube-iT Plus, Evolution, OnTrac, QuadraRack and Simply Efficient are trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies. Rev.2/06/10

31 Frequently Product Information Asked Questions Sheet CABLE RUNWAY RADIUS DROP Mounts to cable stringer or cross member to help maintain proper Category 5/5e/6 or fiber bend radius. Quick and easy installation using clevis pin attachment Fits 6", 9", 12", 15 and 18" cross member tubing For use only with runs on CPI Universal runway (Series 10250) Provides 3" bend radius Products 5" wide (12100-X06, X03) drop into CPI s 6" wide vertical cabling sections Supplied with 1 1/2" cable spools (P/N ) to separate and guide cables Sold individually Runway Radius Drop, Cross Member May be used on other runway series with Cable Runway Movable Cross Member (12115 series) Part Number Cable Runway Width Product Width Color Cable Spools 6 5 Gray 2 ea. 9 8 Gray 2 ea Gray 3 ea Gray 3 ea. 6 5 White 2 ea. 9 8 White 2 ea White 3 ea White 3 ea. 6 5 Black 2 ea. 9 8 Black 2 ea Black 3 ea Black 3 ea Black 3 ea. Runway Radius Drop, Stringer Part Number Runway Application Product Width Universal 10-1/4 Telco 7-3/4 Misc. 5 Universal 10-1/4 Telco 7-3/4 Misc. 5 Universal 10-1/4 Telco 7-3/4 Misc. 5 Color Gray Gray Gray White White White Black Black Black Cable Spools 3 ea. 2 ea. 2 ea. 3 ea. 2 ea. 2 ea. 3 ea. 2 ea. 2 ea in U.S. & Canada Chatsworth Products, Inc. 11/02, REV. 2/05

32 P R O D U C T D ATA S H E E T POWER STRIPS for CPI Rack and Cabinet Systems K E Y F E AT U R E S Distribute power to multiple devices from a single power connection NEMA and IEC style outlets and plugs Available with thermal circuit breakers to protect circuits from overload Available with surge-protection to protect equipment from power spikes Available with local current meters to provide easy current monitoring A P P L I C AT I O N S Power Strips distribute single-phase power to multiple pieces of equipment from a single power connection. Basic Power Strips feature optional thermal circuit breakers and surge protection U S E W I T H CPI Cabinet Systems CPI Rack Systems R E L AT E D A C C E S S O R I E S Power Distribution Units (PDUs) Electronic Locking System (ELS) Remote Infrastructure Management (RIM-600) System CPI Power Strips provide basic power distribution into racks and cabinets allowing you to share a single power connection with multiple pieces of equipment. CPI Power Strips are available in two configurations: basic and metered. Basic Power Strips feature optional thermal circuit breakers and surge protection. Circuit breakers limit the amount of current available to equipment while surge protection blocks excessive voltage from equipment. Both features are critical with unconditioned line power. Metered configurations include an in-line digital ammeter with display to show the amount of current being used by attached equipment. This feature allows the user to monitor current use and judge the amount of remaining capacity on the power strip before adding a new device to the circuit. Choose vertical or horizontal rack-mount power strips that match the voltage and current rating of the power connection. NEMA-NEMA, NEMA-IEC and IEC-IEC style plug and outlet combinations are available. IEC style connectors allow power cords to be custom matched to the power connection. Dual-input and triple-input models are also available to support redundant power connections with a single power strip. See inside for product selection. Contact CPI Technical Support for configuration assistance [email protected]

33 P R O D U C T D ATA S H E E T P o w e r S t r i p s f o r C P I R a c k s a n d C a b i n e t s O R D E R I N G I N F O R M AT I O N Single-Phase, Horizontal Power Strips Part Number Inlet Outlet Receptacles 19 Rack-Mount Volts Amps Plug/Inlet Qty Type Qty Type Circuit Breaker Surge Protection Size Shipping Weight Basic NEMA 5-15P 8 NEMA 5-15R G 9 lb (4.1 kg) NEMA 5-15P 8 NEMA 5-15R X 15A (T) - G 9 lb (4.1 kg) NEMA 5-15P 8 NEMA 5-15R X 15A (T) Yes G 9 lb (4.1 kg) NEMA L5-15P 8 NEMA 5-15R G 9 lb (4.1 kg) NEMA L5-15P 8 NEMA 5-15R X 15A (T) - G 9 lb (4.1 kg) NEMA L5-15P 8 NEMA 5-15R X 15A (T) Yes G 9 lb (4.1 kg) NEMA 5-20P 8 NEMA 5-20R G 9 lb (4.1 kg) NEMA 5-20P 8 NEMA 5-20R X 20A (T) - G 9 lb (4.1 kg) NEMA 5-20P 8 NEMA 5-20R X 20A (T) Yes G 9 lb (4.1 kg) NEMA L5-20P 8 NEMA 5-20R G 9 lb (4.1 kg) NEMA L5-20P 8 NEMA 5-20R X 20A (T) - G 9 lb (4.1 kg) NEMA L5-20P 8 NEMA 5-20R X 20A (T) Yes G 9 lb (4.1 kg) X NEMA L5-20P* 12 NEMA 5-20R X 20A (T) - H 12 lb (5.4 kg) IEC60320 C20* 10 IEC60320 C G 9 lb (4.1 kg) NEMA L5-30P 8 NEMA 5-20R X 15A (T) - H 12 lb (5.4 kg) NEMA L5-30P 12 NEMA 5-20R X 15A (T) - H 12 lb (5.4 kg) NEMA L5-30P 10 IEC60320 C X 15A (T) - G 9 lb (4.1 kg) IEC60320 C20* 10 IEC60320 C G 9 lb (4.1 kg) NEMA L6-30P 10 IEC60320 C X 20A (T) - G 9 lb (4.1 kg) Metered NEMA 5-15P 10 NEMA 5-15R X 15A (T) - H 12 lb (5.4 kg) NEMA 5-15P 10 NEMA 5-15R X 15A (T) Yes H 12 lb (5.4 kg) NEMA L5-15P 10 NEMA 5-15R X 15A (T) - H 12 lb (5.4 kg) NEMA L5-15P 10 NEMA 5-15R X 15A (T) Yes H 12 lb (5.4 kg) NEMA 5-20P 10 NEMA 5-20R X 20A (T) - H 12 lb (5.4 kg) NEMA 5-20P 10 NEMA 5-20R X 20A (T) Yes H 12 lb (5.4 kg) NEMA L5-20P 10 NEMA 5-20R X 20A (T) - H 12 lb (5.4 kg) NEMA L5-20P 10 NEMA 5-20R X 20A (T) Yes H 12 lb (5.4 kg) IEC60320 C13 10 IEC C Yes G 9 lb (4.1 kg) NEMA 5-30P 8 NEMA 5-20R X 15A(T) - H 9 lb (4.1 kg) IEC60320 C20 10 IEC60320 C Yes G 9 lb (4.1 kg) Note: 15 Amp power strips are de-rated to 12 Amps; 20 Amp power strips are de-rated to 16 Amps; 30 Amp power strips are de-rated to 24 Amps. PDUs with IEC60320 C20 inlets do not include a power cord; order the power cord separately. (2 x plg) indicates dual-input. Each plug has an equal number of outlets. 15 Amp max on C13 outlets; 20 Amp max on C19 outlets. Size= W X H X D: G = 19"EIA x 1 RMU x 1.6 (41 mm) H = 19"EIA x 1 RMU x 4.5 (114 mm) Please use CPI Website: for user manual Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, Saf-T-Grip, Seismic Frame, SlimFrame, MegaFrame and TeraFrame are federally registered trademarks of Chatsworth Products, Inc. Cube-iT Plus, Evolution, OnTrac, QuadraRack and Simply Efficient are trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies. 12/09 MKT

34 Frequently Product Information Asked Questions Sheet BICSI & ANSI/EIA/TIA GROUNDING BUSBARS The CPI series Telecommunications Grounding Busbar (TGB) provides a central ground attachment point for telecommunications systems, computers and other equipment located in the data room. The CPI series Telecommunications Main Grounding Busbar (TMGB) provides a central ground attachment point for telecommunications bonding backbones, equipment and the building's ground electrode system. All CPI Grounding Busbars are UL Listed. Hole patterns on Busbars accommodate two-hole lugs per the recommendation of BICSI and ANSI/EIA/TIA-607 standards. Insulators electrically isolate Busbars from the wall or other mounting surfaces, thereby controlling the current path. Mounting brackets are manufactured from high-quality 300 series stainless steel Mounting holes are 3/8" diameter spaced 5.75" apart Busbars mount on the wall, floor or ceiling Ships preassembled and consists of: 1 Busbar 2 insulators 2 stand-off brackets 4 stainless steel bolts 4 lock washers 4 flat washers Sold individually Busbar assemblies with lug kits also available Other configurations available on request Part Number Description Size Shipping Weight Shown TGB Pattern 2 W x 1/4 H x 10 L 12 TGB Pattern 2 W x 1/4 H x 12 L 3 lb 4 lb TMGB Pattern 4 W x 1/4 H x 12 L 7 lb TMGB Pattern 4 W x 1/4 H x 20 L 8 lb in U.S. & Canada Chatsworth Products, Inc. All rights reserved. CPI is a registered trademark of Chatsworth Products, Inc. All other trademarks belong to their respective companies 06/03

35 PRODUCT APPLICATION SHEET ORDERING INFORMATION Grounding Busbar Part Number Bar Size Number of Connectors 5/8 centers / 1 centers W x 10 L x 1/4 thick W x 12 L x 1/4 thick W x 12 L x 1/4 thick W x 20 L x 1/4 thick 27 3 Compression Lug Part Number Cable Size Hole Screw Color Spacing Size Code #6 AWG 5/8 1/4 Blue #6 AWG 1 3/8 Blue /0 1 3/8 Black #6 AWG 1/2, 5/8 1/4 Blue #6 AWG 1/2, 5/8 1/4 Blue C-Type Compression Taps Part Number Conductor Run Conductor Taps #4 Stranded, #6 Solid #6 Stranded, #6 Solid Note: Other sizes are available. Grounding Busbar Two-Hole 90 Slotted Two Mounting Hole Ground Terminal Block Compression Lug Compression Lug C-Type P/N P/N Compression Taps Part Number Description Ground Wire & Jumpers /4 H x 1-1/2 W, 5/8 Hole Spacing, #14 AWG to 2/0 Part Number Description Ground Wire, No Lugs, #6 AWG, 100 L Ground Jumper, (1) Lug, #6 AWG, 9 L Two Mounting Hole Ground Equipment Ground Jumper Kit (2) Lugs, #6 AWG, 24 L Terminal Block Note: Insulated (green and yellow stripe), stranded conductors. Rack Busbars Part Number Description Ground Jumper Vertical Rack Busbar Kit, 72 L x 1/4 thick Horizontal Rack Busbar Kit for 19 W Racks/Cabinets Pedestal Clamp with Grounding Connector Rack Ground Bar Kit, 78 L x.05 thick Pedestal Part Number Type Connections Size/Style Cross Square, 1-1/8 OD (2) #6 AWG per side Horizontal Rack Busbar Kit Cross Straight Round, 1-1/8 to 1-3/4 OD Square or Round, 1-1/8 OD (1) #6 AWG & (1) 2/0 per side (2) #6 AWG or (2) 2/0, one side only Pipe Clamp with Grounding Connector Part Number Pipe Nominal Size Range Pipe OD Range /2-3/ / / / / Cable Runway Ground Straps Part Number Description Straight Type Pedestal Clamp L (11 Overall), #6 AWG, Includes Hardware Cable Runway Ground Straps 2008 Chatsworth Products, Inc. All rights reserved. CPI, Saf-T-Grip, Seismic Frame, SlimFrame and MegaFrame are federally registered trademarks of Chatsworth Products, Inc. CPI Passive Cooling, Cube-iT Plus, Evolution, Simply Efficient, TeraFrame and QuadraRack are trademarks of Chatsworth Products, Inc. All other trademarks belong to their respective companies. MKT Rev.2 08/08

36 Copper Compression Connectors Long Barrel Copper Lugs Long Barrel copper lugs LN Series Two Hole NEMA Produced from high conductivity copper tubing, and suitable for heavy duty applications. They are tin-plated to provide corrosion resistance as well as marked with a die index and color coded. Listed for 35 KV maximum when properly installed. For bolt hole sizes not listed, please contact NSi. CATALOG UPC WIRE BOLT hole COLOR INSTALLING TANG Ctn. SHPG. WT. NO. CODE SIZE SIZE spacing CODE DIES Length Width THICKNESS QTY. LBS./100 L6N /4 1 /2 blue 2,7/374, L6N /2 1 3 /4 blue 2,7/374, L4N /4 5 /8 gray 3,8/346, L4N /2 1 3 /4 gray 3,8/346, L2N /16 3 /4 brown 4,10, L2N /8 1 brown 4,10, L2N /2 1 3 /4 brown 4,10, L1N /16 7 /8 green 4,11/375, L1N /2 1 3 /4 green 4,11/375, L10N /0 1 /2 1 3 /4 pink 5,12/348, L20N /0 1 /2 1 3 /4 black 6,13, L30N /0 1 /2 1 3 /4 orange 9,14, L40N /0 1 /2 1 3 /4 purple 10,15, L250N /2 1 3 /4 yellow 11,16, L300N /2 1 3 /4 white 12,17/298, L350N /2 1 3 /4 red 13,18/324, L400N /2 1 3 /4 blue 14,19/470, L500N /2 1 3 /4 brown 15,20/299, L600N /2 1 3 /4 green 16,22/472, L750N /2 1 3 /4 black 17,24/473, L750NG /2 1 3 /4 black 17,24/473, L1000N /2 1 3 /4 white 19,27, NSi Phone: Fax:

37

38 Instruction Bulletin April 1981 Scotch Brand 25T Grounding Braid with Eyelets APPLICATION The Scotch Brand 25T Grounding Braid with Eyelets can be used on shield connector studs up to 1/4" (6mm) in diameter. INSTALLATION: Position single eyelet over stud as shown. Complete installation of shield connector per standard practice. 1" (25mm) Important Notice to Purchaser: All statements, technical information and recommendations contained herein are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties expressed or implied: Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use or the inability to use the product. Before using, user shall determine the suitability of the product for his intended use, and user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer Minnesota Mining & Manufacturing Co. Litho in U.S.A. TelCom Products Division / 3M 3M, Austin, Texas, 78758

39

40

41

42 CAT Z ASSEMBLIES: CAT326Z34 Home Products Price Lists Library Where to Buy Contact Us Partners Products CAT Z ASSEMBLIES: CAT326Z34 CAT Z ASSEMBLIES: CAT326Z34 2" J-Hook assembled to 6Z34-3/8" plain or threaded rod and 3/8" thru 7/16" flange All Countries Change Print this page Ordering Information Region Part / Article # North America Latin America CAT326Z34 CAT326Z34 Europe/Middle East/Africa Asia/Australia CAT326Z34 Features culus Listed and complies with NEC and TIA requirements for structured cabling systems. Cost-effective alternative to expensive cable tray Galvanized finish on J-hooks provide smoother cable pull and greater corrosion resistance. Many sizes and designs available to attach to a variety of structures. Provides proper support of Category 5e, Category 6a, fiber optic and innerduct 2" Diameter Loop Pregalvanized finish on J-hooks provide smoother cable pull and greater corrosion resistance. Notes For all CADDY CABLECAT supports, make sure cable sag between fasteners is no more than 12" at midspan. (Actual cable sag will depend on the number of cables in each bundle and the weight of the cable.) To achieve this, locate the supports every 4-5 feet to stay within the 12 sag criterion. Product Specifications Package Weight (Imperial) 40 lbs Patent Number 5,740,994 Standard Packaging Quantity 40 Third Party Certifications Type culus Wide Base Cable Support Clips - 2" Diameter Loop Downloads Catalogs CADDY Electrical and Low Voltage/Datacomm Fasteners 2009 Catalog (North America) Application Photos Click each thumbnail below for a larger version. file:///c /Documents%20and%20Settings/jtotlis/Desktop/part.asp.htm[8/12/ :38:58 PM]

43 8 F-CONN CONNECTORS F-Conn Connectors F-Conn s compression connector line is designed for custom installations when appearance matters. Connectors come in nickel or gold for a professional finished look. F Connectors Cable Size Description ICM Part Number RG6/6 Quad Universal F Nickel FS6U RG6/6 Quad Universal F Gold RG6U RG6/6 Quad Plenum F Size 1 FS6PL RG6/6 Quad Plenum F Size 2 FS6PL2 RG59/59 Quad Universal F Nickel FS59U RG59/59 Quad Universal F Gold RG59U RG59/59 Quad Plenum F Size 1 FS59PL RG59/59 Quad Plenum F Size 2 & 3 FS59PL2 RG59/59 Quad Plenum F Size 4 FS59PL4 RG11* F Nickel FS11V RCA Connectors Cable Size Description ICM Part Number 25-26AWG RCA Nickel Multi-Piece FSRCA1RGB 25-26AWG RCA Nickel One-Piece FS1RCA 25-26AWG RCA Gold Multi-Piece RGRCA1RGB 25-26AWG RCA Gold One-Piece RG1RCA 22-24AWG RCA Nickel Multi-Piece FSRCA15RGB 22-24AWG RCA Nickel One-Piece FS15RCA 22-24AWG RCA Gold Multi-Piece RGRCA15RGB 22-24AWG RCA Gold One-Piece RG15RCA RG6/6 Quad Universal RCA Nickel FS6RCAU RG6/6 Quad Universal RCA Gold RG6RCAU RG6/6 Quad Universal RCA Female Nickel FS6RCAUF RG59/59 Quad Universal RCA Nickel FS59RCAU RG59/59 Quad Universal RCA Gold RG59RCAU Plenum RG59 RCA Nickel FS59RCAPL Security RG59 RCA Nickel FS59RCASL RG59/59 Quad Universal RCA Female Nickel FS59RCAUF CPLCCT-SLM Utilize this tool. * = RG11, F connectors work with CPLCCT-SS59/11 tool ** = RG11, BNC connectors work with CPLCCT-11BNC tool.

44 Flextray - Straight Sections 1.5 Deep Flextray 1.38" (48 mm) Straight Sections Height: 1.38" (35 mm) Length: " (3 meter) Wire Dia. Minimum:.196" (5.0 mm) Finishes: EG, GS, BLE, HD, 304S, 316S Width Part Width Wt. Per Pc. Number in. mm lbs. kg FT1.5X4X FT1.5X6X FT1.5X8X FT1.5X12X Only FT1.5X12 (12 wide) is UL Classified and CSA certified 2 Deep Flextray 2.38" (60 mm) Part Width Wt. Per Pc. Number in. mm lbs. kg FT2X2X FT2X4X FT2X6X Height: 2.38" (60 mm) Length: " (3 meter) Wire Dia. Minimum:.196" (5.0 mm) Finishes: EG, GS, BLE, HD, 304S, 316S FT2X8X FT2X12X FT2X16X FT2X18X FT2X20X FT2X24X FT2X30X Width FT2X32X FT2X6 (6 wide) through FT2X32 (32 wide) are UL Classified and CSA certified See page - 2 for finish information 6

45 Flextray - Splicing Accessories Easy way to mount 4" (100mm) wide tray for raceway run. Use 1 /4" screws to attach SUPT WASHER to your specific wall/stud application (hardware sold separately). FTA6HD can be used in pairs to create a center-hung support using 3 /8" rod. To protect cables use threaded rod protector (page 61). To complete 3 /8" center hanger assembly use: 2 - FTA6HD 2 - HN 3 /8"-16 hex nuts Finish: ZN, SS6 Horizontal adjustable kit can be used to create horizontal angles from prepared Flextray straight sections Conveniently poly-bagged Finishes : EG, BLE, 316S Hold Down Plate Part Slot Size Qty./Box Wt./Box Number lbs. kg SUPT WASHER.28 x FTA6HD.40 x Horizontal Adjustable Kit Part Description Qty./Box Wt./Box Number lbs. kg FTSHAK Horizontal Adjustable Kit Splicing Accessories For fast assembly of 90 turns and tee fittings For use with all tray widths and sizes One kit will make two 90 turns or one tee fitting 90 DEGREE KIT: includes: two (2) 90 splice bars and eight (8) FTSCH Finishes : EG, BLE, 316S 90 Degree Kit Part Description Qty./Box Wt./Box Number lbs. kg 90 DEGREE KIT 90 degree splice bar & hardware See page 2 for finish and grounding information 15

46 Flextray - Accessories Clips easily into trays Use for identifying your cable pathways Can be used on all tray sizes Will not fit on side of 1 1 /2 deep Flextray Finish: Non-plenum-rated resins Label Clip Part Description Qty./Box Wt./Box Number lbs. kg LABEL CLIP 10 1 /2 (267mm) Long Attaches up to #1 ground wire to each tray section when separate ground wire is required Used for UL grounding compliance. When using color powder coated finish or paint, coating must be removed at the points of contact. Finish: Copper Plated Ground Bolt Part Description Qty./Box Wt./Box Number lbs. kg GROUND BOLT Ground Bolt Supports ground wire along side of tray Can be used on all trays Finish : Zinc Plated Ground Wire Supports Part Description Qty./Box Wt./Box Number lbs. kg GROUND SUPT GL Ground Wire Support Accessories See page - 2 for finish information 47

47 Flextray - Wall Support Methods Shelf Brackets Heavy-duty support bracket For use with 6 (150mm) to 24 (600mm) wide trays Built-in tab for hold down Optional hardware sold separately Finishes : GLV, HDG, SS6 Part Use With Qty./Box Wt./Box Number Tray Width lbs. kg FTB06CS 6 (150mm) FTB08CS 8 (200mm) FTB12CS 12 (300mm) FTB16CS 16 (400mm) FTB18CS 18 (450mm) FTB20CS 20 (500mm) FTB24CS 24 (600mm) FTB24CS shown L Brackets Installs tray to wall cleanly Part Use With Qty./Box Wt./Box Built-in tab for hold down Number Tray Width lbs. kg (not available in stainless steel) For use with 4 (100mm) to 24 (600mm) 4 L BRKT 4 (150mm) wide trays 8 L BRKT 6 (150mm) & Use with pedestal clamp in raised 8 (200mm) floor applications Hardware sold separately 12 L BRKT 12 (300mm) Finishes : EG, HD, BLE, 316S 16 L BRKT 16 (400mm) Wall Supports 20 L BRKT 18 & 24 (450 & 500mm) L BRKT 24 (600mm) Tab can be bent over for hold down. 12 L BRKT See page - 2 for finish information 27

48 Flextray - Splicing Accessories Tab-Loc Connector Part Description Length Qty./Box Wt./Box Number lbs. kg FTSTLC Tab-Loc Connectors Fast splice for straight runs of tray For use with 2 (50mm) to 32 (800mm) wide tray to connect straight sections only Finishes : ZN, SS6 Splicing Accessories Application Requirements The recommendations listed are equal for all depths (except as noted). Splicing Chart (number of splices required for UL Classification) Tray Height Tray Width - number of splices (50mm) (100mm) (150mm) (200mm) (300mm) (400mm) (450mm) (500mm) (600mm) 2 NC NC NM NM NM NM Installation NC = Not UL Classified in this size NM = Flextray is not manufactured in this size Step 1 Step 2 Step 3 Tab-Loc security without special tools. Screwdriver can also be used to bend tab-locs (hold connector ends while bending). Step 4 See page 2 for finish and grounding information 12

49 Flextray - Ceiling Support Methods Center Trapeze Hanger Part Number Maximum Tray Width Actual Length Wt./Pc. in. mm in. mm lbs. kg FTB06CT FTB08CT FTB12CT FTB16CT FTB18CT FTB20CT FTB24CT Ceiling Supports Can be installed as center-hung or traditional trapeze hanger Multiple options to secure Flextray to hanger - Built in hold down tabs (use screwdriver to bend down tab) - Compatible with TOOLLESS CLIP with snap-in locking pin - Compatible with WBUHD hold down clip when tray crosswire is aligned over top of hanger - Slots and holes for optional hardware attachment Corrosion resistant pre-galvanized zinc finish (other finishes available upon request) Center hole for up to 1 /2 rod Hole on each end for up to 3 /8 rod Threaded rod protector available (SB301-1 /2 x 8) Center Hung Trapeze See page - 2 for finish information 22

50 F Ratings - 1 and 2 hr (See Item 1) T Rating - 3/4 Hr 2 A 4A 3 1B 4B 4B 3 A 1A Section A-A 2 4A 1. Wall Assembly - The 1 or 2 hr fire rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specified in the individual U300 or U400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following construction features: A. Studs - Wall framing may consist of either wood studs or steel channel studs. Wood studs to consist of nom 2 by 4 in. (51 by 102 mm) lumber spaced 16 in. (406 mm) OC. Steel studs to be min 3-1/2 in. (76 mm) wide and spaced max 24 in. (610 mm) OC. B. Gypsum Board* - Thickness, number of layers, fastener type and sheet orientation shall be as specified in the individual U300 or U400 Series Design in the UL Fire Resistance Directory. Max diam of opening is 4-1/2 in. (114 mm). The hourly F rating of the firestop system is equal to the hourly fire rating of the wall assembly in which it is installed. 2. Steel Sleeve - Nom 4 in. (102 mm) diam (or smaller) steel electrical metallic tubing (EMT), steel conduit or Schedule 5 (or heavier) steel pipe sleeve friction-fitted into wall assembly. Sleeve may be installed flush with or extend up to 18 in. (46 cm) beyond one or both wall surfaces. 3. Cables - Aggregate cross-sectional area of cables in steel sleeve to be max 48 percent of the aggregate cross-sectional area of the sleeve. Cables to be rigidly supported on both sides of wall assembly. Any combination of the following types and sizes of copper conductor cable may be used: A. Max 200 pair No. AWG (or smaller) copper conductor cable with polyvinyl chloride (PVC) jacketing and insulation. B. Max 3/C No. 2/0 AWG (or smaller) aluminum or copper conductor service entrance cable with PVC insulation and jacket. C. Max 3/C No. 8 AWG (or smaller) nonmetallic sheathed (Romex) cable with copper conductors, PVC insulation and jacket. D. Max 7/C No. 2/0 AWG (or smaller) multiconductor power and control cables with XLPE or PVC insulation and XLPE or PVC jacket. E. Max RG/U (or smaller) coaxial cable with fluorinated ethylene insulation and jacketing. F. Max 62.5/48 fiber optic cable with PVC insulation and jacketing. G. Max 4 pair No. 24 AWG (or smaller) copper conductor data cable with PVC insulation and jacket. H. Max 4/C No. 2/0 aluminum or copper conductor aluminum or steel Metal-Clad# or Armored-Clad# cable. Reproduced courtesy of Underwriters Laboratories, Inc. Created or Revised: Febuary 17, 2009 (800) (908) FAX (908) [email protected] Website: R W-L-3210 PAGE 1 OF 2

51 4. Firestop System - The firestop system shall consist of the following: A. Packing Material - When required (See table in Item 3B), min 1 in. (25 mm) thickness of min 4.0 pcf (64 kg/m3) mineral wool batt insulation firmly packed into each end of sleeve as a permanent form. Packing material to be recessed from each end of sleeve as required to accommodate the required thickness of fill material. B. Fill, Void or Cavity Material* - Sealant or Putty - Fill material applied to appropriate thickness within steel sleeve, flush with edges of steel sleeve on both surfaces of wall. Min 1/2 in. (13 mm) diam bead of sealant or "rope" of putty shall be applied around the perimeter of the sleeve on each side of the wall when sleeve extends beyond surface of wall. See table below for fill material thickness requirements. Sealant or Putty Type SpecSeal Series SSS Sealant or LCI Sealant SpecSeal Series SSS Sealant or LCI Sealant SpecSeal Putty Thickness, In. (mm) 1/2 in. (13) 1 in. (25) 1 in. (25) Packing Material Required Yes No No SPECIFIED TECHNOLOGIES INC - SpecSeal Series SSS Sealant, SpecSeal LCI Sealant or SpecSeal Putty *Bearing the UL Classification Mark Reproduced courtesy of Underwriters Laboratories, Inc. Created or Revised: Febuary 17, 2009 (800) (908) FAX (908) [email protected] Website: R W-L-3210 PAGE 2 OF 2

52 F Ratings - 1 and 2 Hr (See Item 1) T Ratings - 3/4, 1 and 2 Hr (See Items 3 and 4) Ì84WL0ÇHKÈAHÇ(<'-Î 1A A 5A 5A A 1B Section A-A 1A 1. Wall Assembly - The 1 or 2 hr fire-rated gypsum board/steel stud wall assembly shall be constructed of the materials and in the manner specified in the individual U400 Series Wall and Partition Design in the UL Fire Resistance Directory and shall include the following construction features: A. Studs - Steel studs to be min 3-1/2 in. wide and spaced 24 in. OC. Additional horizontal studs installed to form a box around the cable tray (Item 2). B. Gypsum Board* - Thickness, type, number of layers, orientation and fasteners shall be as specified in the individual Wall and Partition Design. Max area of opening shall be 234 sq in. with a max dimension of 29_1/4 in. The F Rating of the firestop system is equal to the rating of the wall assembly in which it is installed. 2. Cable Tray* - Nom 24 in. wide by 2 in. high (or smaller) welded wire basket cable tray formed from min 0.21 in. thick (5 AWG) steel and having a max 2 by 4 in. grid spacing. The annular space between the cable tray and the periphery of the opening shall be min 1 in. to max 5 in. Cable tray to be rigidly supported on both sides of wall assembly. 3. Cables - Max 2 in. deep cable loading within cable tray consisting of the following types and sizes of cables: A. Max 4 pair No. 24 AWG copper conductor cables with polyvinyl chloride (PVC) jacket and insulation. B. Max RG/U copper conductor coaxial cable with fluorinated ethylene jacket and insulation. C. Any max 4/C No. 10 AWG aluminum or copper conductor Metal-Clad Cable+ or Armored Cable+ with steel or aluminum jacket currently Classified under the Through Penetrating Products category. See Through-Penetrating Products (XHLY) category in the Fire Resistance Directory for names of manufacturers. When Item 3A is used, the T Rating is 1 hr. When Item 3B or 3C is used, the T Rating is 3/4 hr. 4. Optical Fiber Raceway+ - One or more max 2 in. diam (or smaller) optical fiber raceways (innerduct) formed from polyvinyl chloride (PVC) or polyvinylidene fluoride (PVDF) with fiber optic cable fill. Raceways installed in accordance with Article 770 of the National Electrical Code (NFPA No. 70). Raceways may be used in addition to the cable types listed in Item 3. When Item 4 is used, the T Rating is equal to the hourly fire rating of the wall assembly in which it is installed. 5. Firestop System - The firestop system consists of the following items: A. Fill, Void or Cavity Material* - Pillows - Max 9 in. long by 3 in. thick by 6 in. wide plastic jacketed intumescent pillows tightly-packed lengthwise through opening such that ends project an equal distance from the approximate centerline of the wall assembly. SPECIFIED TECHNOLOGIES INC - SpecSeal Firestop Pillows B. Fill, Void or Cavity Material* - Putty - (Not Shown) - Min 1/2 in. thickness of putty applied to fill any small gaps or voids between cables or between the cables and the pillows on both sides of the wall assembly. SPECIFIED TECHNOLOGIES INC - SpecSeal Putty +Bearing the UL Listing Mark *Bearing the UL Classification Marking Reproduced courtesy of Underwriters Laboratories, Inc. Created or Revised: December 4, 2002 (800) (908) FAX (908) [email protected] Website: R W-L-4043 PAGE 1 OF 1

53 F Rating - 3 Hr T Rating - 1 Hr Ì80CAJÇ@/ÈAEÇ(<';Î 2 A A 1 3 Section A-A 1. Floor or Wall Assembly - Min 4-1/2 in. thick lightweight or normal weight ( pcf) concrete. Wall may also be constructed of any UL Classified Concrete Blocks*. See Concrete Blocks category (CAZT) in the Fire Resistance Directory for names of manufacturers. 2. Steel Sleeve - Nom 2 in. diam (or smaller) Schedule 10 (or heavier) steel pipe sleeve or rigid steel conduit sleeve cast or grouted into concrete floor or wall. End of sleeve to project 2 in. beyond top surface of floor or beyond both surfaces of wall. 3. Cables - Cables to be max 4 pair No. 24 AWG (or smaller) copper conductor cables with polyvinyl chloride (PVC) insulation and jacket or max 4 pair No. 24 AWG (or smaller) copper conductor cables intended for plenum applications. Aggregate cross-sectional area of cables to be max 40 percent of the aggregate cross-sectional area of the steel sleeve (Item 2). The annular space within the firestop system shall be a min of 1/4 in. to a max of 1 in. Cables to be rigidly supported on both sides of floor or wall assembly. 4. Packing Material - (Optional) - Open or closed cell polyethylene or polyurethane foam backer rod used as a form to prevent leakage of the fill material. Packing material to be recessed from end of sleeve as required to accommodate the required thickness of fill material. 5. Fill, Void or Cavity Material* - Putty or Sealant - Min 1 in. thickness applied within annulus flush with top edge of sleeve in floors or both edges of sleeve in walls. SPECIFIED TECHNOLOGIES INC - SpecSeal 100, 101, 102, 105, 120 or 129 Sealant, SpecSeal Putty *Bearing the UL Classification Mark Reproduced courtesy of Underwriters Laboratories, Inc. Created or Revised: November 20, 2003 (800) (908) FAX (908) [email protected] Website: R C-AJ-3215 PAGE 1 OF 1

54 PERFORMANCE SpecSeal Series SSP Putty is the basis for systems that meet the exacting criteria of ASTM E814 (UL1479). Systems have been tested for all common forms of construction and most common penetrants with ratings up to 3 hours. Sound attenuation properties have also been tested as per ASTM C919 and E90. Additionally, SpecSeal Putty Pads have been tested to UL263 (ASTM E119, NFPA 251) and are classified for up to 2 hours as a Wall Opening Protective Material for use with both metallic and nonmetallic outlet or switch boxes installed in gypsum wallboard assemblies (steel and wood stud assemblies). Boxes protected with SpecSeal Putty Pads have been successfully tested with box spacing reduced to less than 16. (Not tested nor approved for boxes installed directly back to back). Ordering Information Expansion Begins: Part # Description Packaging Size Volume Expansion: SSP100 SSP Putty Bar 36 in. (0.6 liter) In-Service Temp: SSP28 SSP Putty Bar 24 in. (0.39 liter) SSP4S SSP Putty Pad 7.25 x 7.25 x 3/16 SSP9S SSP Putty Pad 9.00 x 9.00 x 3/16 PHYSICAL PROPERTIES Properties Product Name: Series SSP Putty Color: Red Odor: None Density: 1.45 kg/l (12.08 lb/gal) Solids: 100% 230 F (110 C) > 500% (free expansion) 120 F (49 C) STC Rating: 62 VOC Content**: 0.00 lbs/gal (0.0g/L) Shelf Limit: No Limit **ASTM D 3960 and EPA Federal Reference Method 24. WARRANTY Specified Technologies manufactures its goods in a manner to be free of defects. Should any defect occur in its goods (within one year), Specified Technologies, Inc., upon prompt notification, will at its option, exchange or repair the goods or refund the purchase price. LIMITATIONS AND EXCLUSIONS THIS WARRANTY IS IN LIEU OF ALL OTHER REPRESENTATIONS EXPRESSED OR IMPLIED (INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY FOR FITNESS FOR USE) AND UNDER NO CIRCUMSTANCES SHALL SPECIFIED TECHNOLOGIES INC., BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL PROPERTY DAMAGE OR LOSSES. PRIOR TO USE, THE USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED USE, AND THE USER ASSUMES ALL RISKS AND LIABILITY FOR SUBSEQUENT USE. No statement or recommendations not contained herein shall have nay force or effect unless in an agreement signed by officers of seller and manufacturer. MADE IN THE USA SpecSeal is a registered trademark of Specified Technologies, Inc. Specified Technologies, Inc. 200 Evans Way Somerville, NJ USA Toll Free: Fax: (908) [email protected] UL is a registered trademark of Underwriters Laboratories, Inc. Copyright All rights reserved ZSTI3175

55 PERFORMANCE SSB Pillows are the basis for systems that meet the exacting criteria of ASTM E814 (UL1479) as well as the time-temperature requirements of ASTM E119 (UL263). Tested systems will provide up to three-hour rating for penetrations through concrete, CMU, or concrete tilt-up walls, as well as concrete or concrete over steel deck floors. Additional systems have been tested up to three hours in gypsum board walls. AIR LEAKAGE: Tests conducted by Underwriters Laboratories for air leakage at ambient and elevated temperatures (400 F (204 C)) indicate that properly installed pillows seal penetrations virtually airtight. PHYSICAL PROPERTIES PROPERTIES Product Name SSB Series Firestop Pillows Color: Red Nom. Density: 4 PCF (53 kg/m 3 ) In-Service Temp: <130 F (54 C) Flammability*: V-0 Compression**: 25% - 33% Air Leakage: Less than 1 CFM/sq ft (L Rating): UL1479 (Pillows Only) VOC Content***: 0.00 lbs/gal (0.0 g/l) STC Rating: 60 Shelf Life No Limit * Outer poly bag. ** As installed. ***ASTM D 3960 and EPA Federal Reference Method 24. Ordering Information Part # Description Dimensions Case Qty. SSB14 SSB Firestop Pillows 1 x 4 x 9 (25 x 101 x 229 mm) 20 SSB24 SSB Firestop Pillows 2 x 4 x 9 (50 x 101 x 225 mm) 10 SSB26 SSB Firestop Pillows 2 x 6 x 9 (50 x 152 x 225 mm) 22 SSB36 SSB Firestop Pillows 3 x 6 x 9 (76 x 152 x 225 mm) 16 WARRANTY Specified Technologies manufactures its goods in a manner to be free of defects. Should any defect occur in its goods (within one year), Specified Technologies, Inc., upon prompt notification, will at its option, exchange or repair the goods or refund the purchase price. LIMITATIONS AND EXCLUSIONS THIS WARRANTY IS IN LIEU OF ALL OTHER REPRESENTATIONS EXPRESSED OR IMPLIED (INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY FOR FITNESS FOR USE) AND UNDER NO CIRCUMSTANCES SHALL SPECIFIED TECHNOLOGIES INC., BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL PROPERTY DAMAGE OR LOSSES. PRIOR TO USE, THE USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED USE, AND THE USER ASSUMES ALL RISKS AND LIABILITY FOR SUBSEQUENT USE. No statement or recommendations not contained herein shall have nay force or effect unless in an agreement signed by officers of seller and manufacturer. MADE IN THE USA SpecSeal is a registered trademark of Specified Technologies, Inc. Specified Technologies, Inc. 200 Evans Way Somerville, NJ USA Toll Free: Fax: (908) [email protected] UL is a registered trademark of Underwriters Laboratories, Inc. Copyright All rights reserved ZSTI3181

56 GAI-TRONICS A Hubbell Company Wall-Mount Stanchion Model 234WM Features UL 1598 Listed for Outdoor Installations Bright Safety Yellow Attracts Attention Durable powder-coated finish withstands the harshest environments Custom colors and graphics available Fits all GAI-Tronics Flush-Mount Telephones The Model 234WM Wall-Mount Stanchion is designed to house GAI-Tronics 290 and 270 series Flush-Mount telephones. The stanchion body is bright safety yellow with black EMERGENCY graphics on each side for increased visibility. The highly visible blue L.E.D. strobe, with constant on light, is housed in the upper portion of the stanchion to provide easy identification of the stanchion locations. In addition, a panel light illuminates the phone surface for nighttime use. GAI-Tronics 234WM wall-mount stanchion attracts attention by its mere presence. The 234WM wall-mount stanchion is ideal for: College campuses Parking garages Shopping malls Amusement parks Hotels GAI-TRONICS A Hubbell Company

57 Model 234WM Stanchion Specifications Dimensions W x 9.5 D x 40.5 H inches (0.25 x 0.24 x 1.03 m) Wall Thickness /18-inch aluminum Finish (standard) Powder-coated, Safety Yellow Power Ratings: AC Beacon Model , V ac Panel Light Assembly Model , V ac Weight Approximately 40 lbs. Approvals UL / cul listed telephone stanchion Canadian Electrical Code, Part I (CE Code, Part I), and the ANSI/NFPA 70 National Electrical Code (NEC). Ordering Information Order Model No. 234WM Stanchion Assembly CONSISTING OF: Stanchion Phone Panel Light Order Model No. DESCRIPTION: Tamper-Resistant Installation Tool Note: Model L.E.D. Strobe and Emergency Telephone must be purchased separately. Pub Rev. 9/2009 GAI-Tronics USA (Corporate) Toll Free: 1 (800) Tel: (610) Fax: (610) GAI-Tronics UK Tel: +44 (0) Fax: +44 (0) GAI-Tronics S.r.l - Italy Tel: Fax: GAI-Tronics Malaysia Tel: / Fax: GAI-Tronics Austdac - Australia Tel: Fax: Quality Management System Certified by DNV - ISO 9001:2008 The policy of GAI-Tronics is one of continuous improvement; therefore the company reserves the right to change specifications without notice.

58 GAI-TRONICS A Hubbell Company Free-Standing Stanchion Model 234 Features Architectural Bronze color is pleasing in all settings UL 1598 Listed for Outdoor Installations ADA compliant Durable powder-coated finish withstanding the harshest environments Custom colors and graphics are available GAI-Tronics 234 series stanchion is part of a completely integrated emergency communications station. Designed for remote or high-risk areas, the stanchion provides solutions to security concerns at: College campuses Parking garages Sports arenas Transit platforms Shopping malls The stanchion accommodates GAI-Tronics 290 series and 270 series flush-mount telephones. The stanchion is easily located by potential users because it stands over nine feet tall, with large EMERGENCY graphics on all four sides. The highly visible model L.E.D. Strobe, with constant on light, mounts on top of the stanchion for quick identification of stanchion location. Additionally, a panel light illuminates the phone for nighttime use. GAI-TRONICS A Hubbell Company

59 Model 234 Stanchion Specifications Dimensions W x 10 D x 114 H inches (0.25 x 0.25 x 2.89 m) Wall Thickness /16-inch hot-rolled steel Finish/Color Powder coat / Architecture bronze Power Rating (Phone panel light) V ac / 7 V ac output Power Rating (Strobe) V ac Shipping Weight lbs. UL / cul listed OUTDOOR telephone stanchion: Canadian Electrical Code, Part I (CE Code, Part I), and the ANSI/NFPA 70 National Electrical Code (NEC). Ordering Information Order Model No. CONSISTING OF: 234 Stanchion Assembly Order Model No Stanchion Lens Phone Panel Light DESCRIPTION: Tamper-Resistant Installation Tool (Required To Access Telephone) Stanchion Mounting Kit (No Charge When Ordered w/ Stanchion) L.E.D. Blue Strobe 290 series See publications and series See publications and Note: GAI-Tronics phone and strobe are sold separately. Distributor Pub GAI-Tronics USA (Corporate) Toll Free: 1 (800) Tel: (610) Fax: (610) GAI-Tronics UK Tel: +44 (0) Fax: +44 (0) GAI-Tronics S.r.l - Italy Tel: Fax: GAI-Tronics Malaysia Tel: / Fax: GAI-Tronics Austdac - Australia Tel: Fax: Quality Management System Certified by DNV - ISO 9001:2008 The policy of GAI-Tronics is one of continuous improvement; therefore the company reserves the right to change specifications without notice.

60 Emergency Telephones GAI-TRONICS Models 294AL-003 & A Hubbell Company Models , 293AL-001 and Features Extended temperature range: - 40 F to +140 F Standard Analog Telephone line powered No external power or battery required Remote programming Microphone and speaker located for optimal performance Large "Palm" activation button call for help Auto answer Silent Monitoring Auxiliary switch activates peripheral equipment ADA compliance features: Braille "Help" tag Model [Valox] (Left) "Call Received" LED Indicator Also available as 293AL-001 in Cast Aluminum Model Brushed Stainless Steel (Right) Custom colors and silk-screening available Three number rollover - unit dials up to three different numbers to ensure emergency calls are answered Emergency communications is a growing concern in all types of public areas including college campuses, parking garages, sports arenas, business and industrial parks, and more. Since emergency telephones are often installed in the harshest environments, durability and performance are extremely important. Manufactured in both surface and flush-mount designs, GAI-Tronics emergency telephones offer superior reliability. Emergency telephone users simply press the large red emergency button for immediate connection to the security office. The benefit GAI-Tronics offers over any other telephone manufacturer is more features, more flexibility, and greater reliability. For instance, our units are fully linepowered so no external power is required. Our extended temperature range means the units can be installed virtually anywhere and still perform reliably. GAI-Tronics emergency telephones significantly increase safety and reliability in all types of public areas. We have been manufacturing rugged industrial communications equipment for 60 years and consistently strive to meeting and exceed customer requirements. As an ISO9001 Certified Company, we maintain the highest quality standards and are proud that our equipment is manufactured in the U.S.A. GAI-TRONICS A Hubbell Company

61 Emergency Telephones TECHNICAL SPECIFICATIONS Electrical Loop current Operation Auto-dial digits Audio Output Isolated solid state switch Telephone Line Mechanical Operating Temperature Range Relative Humidity PCBA (Printed Circuit Board Assembly) Model Enclosure Dimensions Weight Model 293AL-001 Enclosure Dimensions Weight Model Construction Dimensions Weight 24 ma (35 ma recommended) Compensate low or less stable line current with Part # plug-in power supply 5 V dc 600 ma REGU- LATED PLUG-IN PWR (sold separately) Loop Start 24 Digits Voice - 80 db 1 meter with 40mA of loop current 1 khz tone - 76 db 1 meter with 40mA of loop current 48 V 125 ma marms 24 V dc or 48 V dc -40 C to +60 C -40 F to +140 F To 95%, no condensation Conformal Coated MODELS Surface-Mount Emergency Telephone, Valox, Auto-dial Valox (high impact, glass-reinforced polyester) molded in safety yellow 9.5H x 8W x 4D inches; (241.3H x 203.2W x 101.6D mm) 4.0 lbs.; 1.8kg Cast aluminum painted safety yellow 9.5H x 8W x 4D inches; (241.3H x 203.2W x 101.6D mm) 7.8 lbs.; 3.54kg Panel: 14-gauge brushed stainless steel Back Box: 16-gauge cold-rolled steel with black polyurethane finish. Panel: 12.0H x 10.0W in. (304.8 x 254mm) Back box: 2.38 in. (60.5mm) (depth from mounting surface) Panel Cutout: 10.1H x 8.43W in. (255.7mm x mm) 6.5 lbs.; 2.94kg Approvals Safety of Information Technology Equipment Enclosures for Electrical Equipment 47 CFR Part 68 Certification Number Ringer Equivalence Number Network Connection (USOC) IC Information (Canada) IC Certification Number Ringer Equivalence Number Connection Method Surface-Mount Emergency Telephone, Aluminum, Auto-dial Flush-Mount Emergency Telephone, Auto-dial UL / CSA UL 50, Type 3R US: ADGTE04B0414HAC 0.4B RJ11 882B-GTC 0.4B CA11A AL GAI-Tronics offers telephone panels designed to fit most non-gai-tronics emergency phone columns. Ask about our smaller sized flush-mount telephones. Pub Rev GAI-Tronics USA (Corporate) Toll Free: 1 (800) Tel: (610) Fax: (610) GAI-Tronics UK Tel: +44 (0) Fax: +44 (0) GAI-Tronics S.r.l - Italy Tel: Fax: GAI-Tronics Malaysia Tel: / Fax: GAI-Tronics Austdac - Australia Tel: Fax: Quality Management System Certified by DNV - ISO 9001:2008 The policy of GAI-Tronics is one of continuous improvement; therefore the company reserves the right to change specifications without notice.