QUICK START GUIDE. Configuring Biamp s Dialer Application INTRODUCTION CONFIGURE THE DEVICE S WI-FI SETTINGS CREATE A NEW ROOM
|
|
- Shana White
- 8 years ago
- Views:
Transcription
1 Configuring Biamp s Dialer Application INTRODUCTION Biamp now offers an app for Apple ipad /iphone /ipod touch which allows you to wirelessly control an AudiaFLEX or a Nexia TC installed in a teleconferencing application. The app is available through Apple s App Store. If you are familiar with Audia and/or Nexia and are looking to get started quickly, follow the Quick Start Guide instructions on this page. In-depth documentation and troubleshooting steps are available on pages 2-6. CONFIGURE THE DEVICE S WI-FI SETTINGS QUICK START GUIDE Your ipad/iphone/ipod touch needs to be able to communicate with the Audia or Nexia over a wireless network. In the Settings app on your device, select the appropriate Wi-Fi network. If the Wi-Fi network doesn t provide IP addresses automatically (DHCP), you may need to assign a static IP address. Both the network chosen and the IP address assigned to your device must be accessible to the Audia or Nexia. CREATE A NEW ROOM Open the dialer app, and press the wrench icon to select the Setup page. Click the Add Room button to create a new room. In the room s settings, configure the following fields: Room Name Interface IP Address - A descriptive name for the room. - If connecting to an Audia, choose whether you are using a TI-2 card (analog) or a VoIP-2 card (VoIP). For Nexia, always choose TI-2. - The IP address of the Audia/Nexia. If there are multiple devices in the system, you can use any device. Dialer Block or VoIP Console Block Device ID - The Unit number to which the TI-2 Dialer block or VoIP-2 Console block is allocated. Instance ID - The Instance ID (or Instance ID Tag) of the TI-2 Dialer block or VoIP-2 Console block. Line Number - For VoIP-2 cards only, enter the line number you want to use. Prefix (optional) Prefixes allow you to define digits which will be dialed before the phone number is dialed. This is sometimes useful if, for instance, you always need to dial a 9 to get an outside line. Prefixes are optional and these fields can be left blank. Prefix Number - The number(s) to be dialed before making a call. Threshold Min - The minimum phone number length to which the prefix will be applied. Threshold Max - The maximum phone number length to which the prefix will be applied. Transmit/Receive Level Control (optional) The app allows you to control up to two level control blocks in the Audia/Nexia system. By default, they are labeled Transmit and Receive, but the labels can be customized. Level controls are optional and these fields can be left blank. Label - The text which will appear below the level control. Device ID - The Unit number to which the level control block is allocated. Instance ID - The Instance ID (or Instance ID Tag) of the level control block. Channel - The channel number of the level control block. Logic Meter (optional) A logic meter allows the app to detect incoming calls. The logic meter must be connected to the Ring (RI) logic output on the VoIP Console block or TI-2 Receive block. The logic meter is optional and these fields can be left blank. Device ID - The Unit number to which the logic meter is allocated. Instance ID - The Instance ID (or Instance ID Tag) of the logic meter block. CONNECT TO THE ROOM AND MAKE A TEST CALL Press the dial pad icon to select the Dial Pad page. At the top of the page, press the Select current room drop-down menu and select the room that you created. Once connected, dial a number on the dial pad and press the Call button. If you weren t able to connect to the room or make a call successfully, consult the Troubleshooting section on the last page of this document or read the in-depth documentation on the following pages. 1 of 6
2 CONFIGURING THE IPAD / IPHONE / IPOD TOUCH SETTING UP WI-FI CONNECTION Your ipad/iphone/ipod touch needs to be able to communicate with the Audia or Nexia over a wireless network. If the network that your Audia/Nexia is connected to is not accessible via an existing wireless network, you may need to install a wireless router to facilitate this communication. Once the wireless network is in place, open the Settings app on your ipad/iphone/ipod touch and select the appropriate Wi-Fi network. If the wireless network doesn t provide IP addresses automatically via DHCP, you may need to assign a static IP address. The IP address assigned to your ipad/iphone/ipod touch must be accessible to the Audia/Nexia. Contact your IT administrator for assistance with selecting the correct network and obtaining an appropriate IP address. BIAMP DIALER APP - SETUP PAGE Figure 1 - Setup page on both an ipad and iphone. The app can be configured to connect to different rooms. The dialer app needs some information about your Audia/Nexia system before it can connect and control it. This information is entered on the Setup page of the app. You can access the Setup page on an ipad by pressing the wrench icon. On an iphone or ipod touch, you can access the Setup page by going to the Rooms page and pressing the Setup button in the upper right corner. The dialer app is capable of connecting to multiple Audia/Nexia systems, but it can only connect to one room at a time. If there are multiple rooms or multiple systems that the app will connect to, each room can be configured separately in the Setup page. If there is not already a room defined in the Setup page, press the Add Room button to start a new room. Each room consists of the following settings: ROOM The first pieces of information that the app needs are the name of the room, the type of phone line being used, and the IP address of the Audia/Nexia device. All of these fields are required. Name - The room s name. If multiple rooms are defined, you will be able to identify them by this name. Interface - Choose whether this room uses an analog phone line or a digital (VoIP) phone line. If it uses an analog phone line, choose TI-2. For digital, choose VoIP-2. If you re using a Nexia TC, always choose TI-2. IP Address - The IP address of the Audia/Nexia which the app will control. If multiple Audias/Nexias participate in the system, you may enter the IP address of any of the devices. DIALER BLOCK OR VOIP CONSOLE BLOCK Next, the app needs to know some information about the dialer block associated with your telephone interface. All of these fields are required. Device ID - The Unit number to which the dialer block is allocated. If the Interface is set to TI-2, this will be the TI-2 Dialer block (for AudiaFlex) or the TC Dialer block (for Nexia). If the Interface is set to VoIP-2, this will be the VoIP Console block. See page 5 for instructions on how to obtain the device ID of a block. Instance ID - The Instance ID of the dialer block. You may alternatively use the Instance ID tag of the block instead of the numeric ID. If the Interface is set to TI-2, this will be the TI-2 Dialer block (for AudiaFlex) or the TC Dialer block (for Nexia). If the Interface is set to VoIP-2, this will be the VoIP Console block. See page 5 for instructions on how to obtain the instance ID of a block. 2 of 6
3 PREFIX (optional) Configuring a prefix allows you define digit(s) which will always be dialed before the phone number is dialed. For instance, if your phone system always requires you to dial a 9 to call using an outside line, it may be more convenient to add the 9 as a prefix rather than having to remember to add a 9 before every number you dial. Additionally, consider that ipad/iphone contacts are generally stored in the format (123) When dialing a number from a contact entry, the only way to add required numbers before the stored contact number is by assigning a prefix. For instance, if you need to dial 9 for an outside line and then 1 before the area code, set the prefix number to 91. You may want the prefix to be applied to some numbers but not others. For instance, the prefix may not be required for dialing an internal extension, even though it is required for dialing an external number. And, the prefix might not be desired when making an international call. In these situations, you can define a minimum and maximum prefix threshold. If the number of digits in the phone number is less than the minimum threshold or more than the maximum threshold, the prefix will not be applied. The prefix feature is optional and all fields can be left blank. When using the prefix feature, it is not required to specify both a minimum and a maximum. Prefix Number - The number(s) to be dialed before making a call. Threshold Min - The minimum phone number length to which the prefix will be applied. Threshold Max - The maximum phone number length to which the prefix will be applied. TRANSMIT/RECEIVE LEVEL CONTROLS (optional) The dialer app allows you to control up to two level controls in your Audia/Nexia system. By default, they are labeled transmit and receive but their labels can be customized. Both level controls are optional, their fields can be left blank. If any required fields are left blank, the volume up/down and mute buttons will be hidden when you connect to the room. The dialer app can only control Level Control blocks in your Audia/Nexia file (i.e. it cannot control input blocks, mixer blocks, etc). Label - A descriptive label for the level control. This text will appear below the fader when you connect to the room. Device ID - The Unit number to which the Level Control block is allocated. See page 5 for instructions on how to obtain the device ID of a block. Instance ID - The Instance ID of the Level Control block. You may alternatively use the Instance ID tag of the block instead of the numeric ID. See page 5 for instructions on how to obtain the instance ID of a block. Channel - The channel number of the Level Control block that you want to control. For a single-channel Level Control block, the channel number will always be 1. LOGIC METER (optional) The dialer app has the capability of detecting incoming phone calls and alerting the user. To use this feature, your Audia/Nexia file must include a Logic Meter block which is connected to the appropriate Ring logic output. For an analog phone system (TI-2, Nexia TC), the Ring logic output will be located on the bottom of the Receive block, labeled RI. For a VoIP phone system, the Ring logic output will be located on the bottom of the VoIP Console block, labeled either RI1 or RI2 (for lines 1 and 2). The Logic Meter must always be a single-channel block. See Figure 3. Figure 2 - A typical prefix setting. Before each call, a 9 will be dialed to get an outside line, then a 1 before the area code, and then the phone number. The prefix will only be applied to numbers that are 10 or more digits long. Device ID - The Unit number to which the Logic Meter block is allocated. See page 5 for instructions on how to obtain the device ID of a block. Instance ID - The Instance ID of the Logic Meter block. You may alternatively use the Instance ID tag of the block instead of the numeric ID. See page 5 for instructions on how to obtain the instance ID of a block. Figure 3 - Logic meters connected to the Ring logic output on both a TI-2 receive block and a VoIP Console block. PRESETS (optional) The dialer app can optionally be configured to recall presets that have been programmed in the Audia/Nexia system. At the top of the Room Setup page, select the Room Presets tab. Click on Add Preset to add a new preset. See Figure 4. Name - A descriptive label for the preset. The name entered here does not need to match the name of the preset in Audia/Nexia. Value - The number of the preset in your Audia/Nexia file. Preset numbers start at See page 5 for instructions on how to obtain the preset number of a preset. 3 of 6 Figure 4 - Room Presets tab of the Setup page on an ipad.
4 BIAMP DIALER APP - CONTACTS PAGE The dialer app provides several methods for storing phone numbers, and dialing from a contact list instead of typing in the phone number manually. Access the Contacts page on an ipad by pressing the Contacts button or on an iphone/ipod touch by pressing the Contacts button at the bottom of the screen. There are three different kinds of contacts: APP CONTACTS The dialer app can store its own contacts which are only accessible to the app. The contacts can be internal extensions or external numbers. On the App Contacts page you can add new contacts or dial existing contacts simply by pressing them. IPAD/IPHONE CONTACTS The dialer app also has the capability of accessing the ipad/iphone s contact list. This contact list is managed by Apple s Contacts app. RECENT CONTACTS Additionally, the dialer app will keep a list of recently called numbers. Press any of these numbers to redial them. A REMINDER ABOUT PREFIXES The prefix feature (described earlier under the Setup page instructions) allows you to automatically insert numbers before the phone number to be dialed. When dialing from contacts, this feature can be especially useful. For instance, ipad/iphone contacts are generally stored in the form (123) However, your phone system may require you to dial a 9 to get an outside line, and then dial a 1 before the area code. When dialing from a contact, the only ways to insert these digits are to store the contact with those extra digits, or to specify a prefix. BIAMP DIALER APP - DIAL PAD PAGE The Dial Pad page is where you can make new phone calls, and it is the page which is displayed when you are on an active phone call. Access the Dial Pad page by pressing the Dial Pad button. If you re not currently connected to a room, the dial pad will be disabled. To connect to a room on an ipad, press the drop down menu at the top of the page (labeled Select current room ) and choose a room. On an iphone or ipod touch, press the Rooms button and choose a room. To make a call, simply dial the number and press the Call button. The app will then go into Live Call mode, and you can press the End Call button to hang up the phone. RECEIVING INCOMING CALLS The dialer app can be used to receive incoming calls. The way the app responds to incoming calls differs depending on whether a Logic Meter has been configured for the current room (see Logic Meter on page 3). If a Logic Meter has been configured, the app will pop up an Incoming Call dialog when the phone is ringing. From there, you can choose to accept the call or ignore it. If a Logic Meter has not been configured, the app is not able to detect incoming calls. However, by default the Audia/Nexia will generate a ringtone out of the speakers when there is an incoming call. If you hear this ringtone, you can simply press the Call button to pick up the line. LEVEL CONTROL & MUTE On the ipad version of the app, up to two level controls and mute buttons can appear on the Dial Pad page if they are configured for the room. By default, they are labeled Transmit and Receive, but the labels can be customized during room setup. The number displayed by the level control indicates the current dbu value for the level control. On the iphone/ipod touch version of the app, level controls are displayed on their own Levels page. PRESET RECALL If presets have been configured for the current room, they can be recalled at any time from the dialer app. On the ipad version, press the Preset button or on the iphone/ipod touch version, go to the Presets page. Select a preset to recall it. 4 of 6
5 CONFIGURING AUDIA/NEXIA FOR THE DIALER APP Your Audia/Nexia file should be correctly configured to ensure that the dialer app can effectively communicate with it. Below are some considerations for your Audia/Nexia networking settings and configuration file. All tasks described on this page are performed in either Audia or Nexia software. NETWORKING SETTINGS The IP address assigned to your Audia/Nexia must be accessible to the ipad/iphone/ipod touch which is to control it. There are two ways to set the IP addresses such that they are accessible to one another over the network. The first way is to set the Audia/Nexia IP address in the same subnet as the ipad/iphone/ipod touch. For instance, an AudiaFlex with an IP of and an ipad with an IP of are accessible to each other. If the IP addresses are not in the same subnet, then they must be able to send their communications through a gateway to get routed to the other device. In this case, it s imperative that the Audia/Nexia has a valid Default Gateway specified in its networking settings. For instance, an AudiaFlex with an IP of cannot communicate directly to an ipad with an IP of But, as long as they both have a valid Default Gateway specified, the network will route their communications between subnets. To change the networking settings on an Audia/Nexia, navigate to Device Maintenance (File >Network >Perform Audia/ Nexia Device Maintenance) and click on Set IP Address. IDENTIFYING DEVICE ID & INSTANCE ID In order to set up a room in the dialer app, you must be able to determine the Device ID and Instance ID of several blocks in your file. Both of these settings can be found in the Property Sheet for any block. To open the Property Sheet, right-click on a block and select Properties. Then, select the DSP Attributes 1 tab within the Properties sheet. The Device ID of the block will be displayed under Allocated To Unit and the Instance ID will be displayed under Instance ID. You may also specify an Instance ID Tag here and use it in the app in place of the Instance ID. See Figure 5. You can only open the Property Sheet while you re not connected to the system. However, to find the Instance ID of a block while you are connected to the system hold down Ctrl-A and click on a block. The Instance ID will be displayed in the extreme bottom-left corner of the screen. See Figure 6. LOGIC METER The dialer app has the capability of detecting incoming phone calls and alerting the user. To use this feature, your Audia/Nexia file must include a Logic Meter block which is connected to the appropriate Ring logic output. For an analog phone system (TI-2, Nexia TC), the Ring logic output will be located on the bottom of the Receive block, labeled RI. For a VoIP phone system, the Ring logic output will be located on the bottom of the VoIP Console block, labeled either RI1 or RI2 (for lines 1 and 2). The Logic Meter must always be a single-channel block. See Figure 3 on page 3. Figure 5 - The Property Sheet showing a block with Instance ID 19 and Device ID 2. Figure 6 - The Control-A shortcut shows the Instance ID of a block in the bottom-left corner of the screen. IDENTIFYING PRESET NUMBERS If your Audia/Nexia file includes presets which you d like to recall from the dialer app, you will need to identify the preset numbers of each preset. To do this, go to the Presets menu in Audia/Nexia software and select Recall. Find the preset(s) you d like to recall and note the Preset ID of each one. The Preset ID is what must be entered into the dialer app s Preset Value field. See Figure 7. Figure 7 - The Recall Preset window from Audia/Nexia software. This system has four presets with ID s See also Figure 3 on page 3 for a view of the corresponding Room Presets page on an ipad. 5 of 6
6 TROUBLESHOOTING Problem I m getting the error: Unable to connect to Audia/Nexia when trying to connect to a room. I m getting the error: Room configuration is invalid. Please contact your system administrator when trying to connect to a room. The dial pad is grayed out and I can t make a call. I m getting the error: Unable to recall preset when trying to recall a preset. One or both of my level controls don t appear when I m connected to a room. Dialing from contacts doesn t work; the call doesn t go through or I get a busy tone. The app doesn t detect incoming calls. Possible Resolutions Indicates a network problem. Is IP address correctly entered in Room Setup? Is the Audia/Nexia IP accessible to your device (see Networking Settings, page 5)? Is the ipad/iphone/ipod touch connected to the correct Wi-Fi network, and obtaining an appropriate IP address automatically? Indicates that a required field in Room Setup is either missing or incorrect. Double-check all non-optional fields in the Setup page for that room. See Biamp Dialer App - Setup Page on page 2. Indicates that the dialer app is not currently connected to a room. You must connect to a room before you can make a call. See Biamp Dialer App - Dial Pad Page on page 4. Indicates that the preset you re trying to recall may not exist. Double-check preset settings in the Room Presets page, see Presets on page 3. Indicates that a field in the Level Control section of the Room Setup page is either empty or incorrect. See Transmit/Receive Level Controls on page 3. May indicate that your phone system requires a prefix. See Prefix on page 3. Indicates that a Logic Meter may not be configured, or is configured incorrectly. See Logic Meter on page 3. I can t make multiple calls at the same time, or connect to multiple rooms at the same time. The dialer app can only connect to one room at a time, and can only make one call at a time. The app does not currently support multiple simultaneous calls. 6 of 6
IP Link Device Interface Ethernet Communication Sheet
This document provides additional assistance with wiring your Extron IP Link enabled product to your device. Different components may require a different wiring scheme than those listed below. For complete
More informationIP Link Device Interface Communication Sheet
This document provides additional assistance with wiring your Extron IP Link enabled product to your device. Different components may require a different wiring scheme than those listed below. For complete
More informationIP Link Device Interface Communication Sheet
This document provides additional assistance with wiring your Extron IP Link enabled product to your device. Different components may require a different wiring scheme than those listed below. For complete
More informationHow to find the MAC address of your computer
How to find the MAC address of your computer To complete the Application for IP Connection, it is required that you include your MAC address. Explanations are provided for the following systems. Windows
More informationIntermedia Cloud Softphone. User Guide
Intermedia Cloud Softphone User Guide FOR MORE INFO VISIT: CALL US EMAIL US intermedia.net +1.800.379.7729 sales@intermedia.net 1 Contents 1 Introduction... 3 1.1 Cloud Softphone Features... 3 2 Installation...
More informationAndroid OS Mobile Dialer Application Manual. Make low cost Internet calls from Android Smartphone or Tablet
Android OS Mobile Dialer Application Manual Make low cost Internet calls from Android Smartphone or Tablet Android Mobile Dialer Application 1. Introduction... 2 2. Signup... 3 3. Download & Setup... 5
More informationAudiaFLEX Voice-over-IP Interface. Preliminary Steps. Configuring a Cisco CallManager system to work with Biamp s VoIP-2 card
Configuring a Cisco CallManager system to work with Biamp s VoIP-2 card AudiaFLEX Voice-over-IP Interface Biamp s VoIP-2 card allows Biamp AudiaFLEX digital signal processors to make and receive calls
More informationTesira Voice-over-IP Interface. Preliminary Steps. Configuring a Cisco CallManager system to work with Biamp s SVC-2 card
Configuring a Cisco CallManager system to work with Biamp s SVC-2 card Tesira Voice-over-IP Interface Biamp s SVC-2 card allows Biamp Tesira digital signal processors to make and receive calls over any
More information2. Once you have UmojaPhone app installed on your mobile device make sure to have the correct network, Wi-Fi,3G or 4G:
About UmojaPhone App for iphone UmojaPhone App is a free SIP Based Softphone for iphone mobile digital devices. The UmojaPhone App Mobile dialer for iphone comes equipped with the following features: Ability
More informationAbout UmojaPhone App for Android UmojaPhone App Requirements Please note Set up
About UmojaPhone App for Android UmojaPhone App is a SIP Based Softphone for Android mobile digital devices. The UmojaPhone App Mobile dialer for Android comes equipped with the following features: Ability
More informationMOBILITY FOR iphone USER GUIDE
MOBILITY FOR iphone USER GUIDE VERSION 20.0.2 401 Market Street, First Floor Philadelphia, PA 19106 877.258.3722 www.alteva.com Table of Contentsl 1. About Alteva Mobility for iphone... 3 2. Installation...
More information8x8 Virtual Office Mobile User Guide for iphone
8x8 User Guide for iphone Works with iphone, ipad and ipod Touch Version 2.0, September 2010 Table of Contents Introduction...3 Features...3 Technical Requirements...4 Getting Started...5 Ordering from
More informationMobile Communicator for Mobile Devices
Mobile Communicator for Mobile Devices Quick Reference Guide Hosted Voice Customer Resource Center www.earthlinkbusiness.com/hostedvoice 2015 EarthLink. Trademarks are property of their respective owners.
More informationOrbitel. Residential Digital Phone Service User s Guide
Orbitel Residential Digital Phone Service User s Guide All Rights Reserved Copyright 2005 The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any
More informationSYMETRIX SOLUTIONS: TECH TIP February 2014
Crestron Symetrix Dialer Example Introduction This tech-tip describes how to control a Symetrix Radius AEC and telephony interface using a Crestron Pro2-style controller. A complete Symetrix Radius configuration
More informationThere are a couple of notes about this however: It is best to have the IP subnet that the VoIP device on be on the same subnet as the DXL Exchanges.
Our DXL system with the VoIP (Voice over IP) Option, in addition to the Harding VoIP masters, intercoms, and paging speakers, can interface to VoIP enabled devices such as PDA's and PC soft-phones. We
More informationHow To Use The Lutron Home Control+ App On An Ipad Or Ipod
for the Apple ipad TM, iphone TM and ipod touch revision B Page 1 1.800.523.9466 Overview... 3 What hardware and software do I need?... 4 How does the ipad/iphone/ipod Touch connect to my Lutron system?...
More informationTI IS-1007 v1.0. TeamConnect. Network and IT configuration
TI IS-1007 v1.0 TeamConnect Network and IT configuration Contents Contents Introduction...3 Configuration and connection possibilities...4 System configuration...5 Network information...7 Core network
More informationC-more Remote Access with Apple ipad or iphone Tutorial
C-more Remote Access with Apple ipad or iphone Tutorial P a g e 2 Introduction: This script will walk you through the basic process of setting up the remote access with an Apple ipad with the Remote Access
More informationios Mobile Dialer Application Manual Make low cost Internet calls from your iphone, ipad and ipod touch
ios Mobile Dialer Application Manual Make low cost Internet calls from your iphone, ipad and ipod touch ios Mobile Dialer Application 1. Introduction... 2 2. Signup... 3 3. Download & Setup... 5 4. Calling
More informationConfiguring Windows for TAPI
Configuring Windows for TAPI For TAPI-enabled programs to be able to dial using the TAPI Service Provider, Windows must be configured correctly to be able to use the proper line, get an outside line, and
More informationCRESTRON-APP/CRESTRON-APP-PAD
1 3 Introduction The free version of the app has limitations on the size and complexity of the project. For complete functionality, upgrade to the Pro version via an in-app purchase. The CRESTRON-APP and
More informationIP Link Device Interface Ethernet Communication Sheet
This document provides additional assistance with wiring your Extron IP Link enabled product to your device. Different components may require a different wiring scheme than those listed below. For complete
More information8x8 Virtual Office Mobile User Guide for ios
8x8 User Guide for ios Works with iphone, ipad and ipod Touch Version 3.0, August 2012 The Champion For Business Communications Table of Contents Introduction...3 Features...3 Technical Requirements...4
More informationAll Rights Reserved. Copyright 2009
IMPORTANT NOTICE CONCERNING EMERGENCY 911 SERVICES Your service provider, not the manufacturer of the equipment, is responsible for the provision of phone services through this equipment. Any services
More informationStep-by-Step Setup Guide Wireless File Transmitter
EOS Step-by-Step Setup Guide Wireless File Transmitter Server Mode Infrastructure & Ad Hoc Networks for Apple ios Devices 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without
More informationAll Rights Reserved. Copyright 2007
All Rights Reserved Copyright 2007 The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any means, without the written permission of the copyright
More informationCRESTRON-APP/CRESTRON-APP-PAD Control App for Apple ios
1 Introduction The Crestron apps CRESTRON-APP and CRESTRON-APP-PAD provide a Smart Graphics touch screen user interface on Apple devices running the ios operating system. CRESTRON-APP can also provide
More informationHow To Use A 9608 Phone On A Cell Phone On Sim Sims 2 (Satellite) On A Sims 3 (Cell Phone) On An Iphone Or Ipad Or Ipa 2 (Cellphone) On Sims 4
AVAYA 9608 SIP DESKPHONE INSTRUCTIONS MESSAGE WAITING INDICATOR YOUR PHONE 9608 PHONE INSTRUCTIONS If there are messages in your Avaya Voice Mailbox, the light on the top right corner of your telephone
More informationSetup for Windows XP Connect to your Windows XP machine with: FileBrowser, NetPortal & ServerControl
Connect to your Windows XP machine with: FileBrowser, NetPortal & ServerControl Copyright Stratospherix 2010 Apple, the Apple logo, ipod, ipod touch, and itunes are trademarks of Apple Inc., registered
More informationSIP Internet Telephony Gateway
SIP Internet Telephony Gateway VIP - 2 / 4 / 8 / 16 / 24 Series Peer-to-Peer Quick Configuration for VIP-450 Copyright PLANET Technology Corporation. All rights reserved. Scenarios explain: Peer-to-Peer
More informationSoftware and Settings Instructions
SoelTech Automation Inc. Software and Settings Instructions Select the blue disclosure button that is associated with the network name you want to connect the Mobile GDO to (Blue >). It would normally
More informationPolycom Conference Phone Quick Reference Guide ACC-1144 PUG
ACC-1144 PUG Polycom Conference Phone Quick Reference Guide Table of Contents INTRODUCTION TO YOUR POLYCOM CONFERENCE PHONE... 2 WELCOME... 2 CONFERENCE PHONE... 2 HOW TO USE YOUR POLYCOM CONFERENCE PHONE...
More informationApplication Notes for Biamp AudiaFLEX VoIP-2 with Avaya Aura Communication Manager Using Avaya Aura SIP Enablement Services Issue 1.
Avaya Solution & Interoperability Test Lab Application Notes for Biamp AudiaFLEX VoIP-2 with Avaya Aura Communication Manager Using Avaya Aura SIP Enablement Services Issue 1.0 Abstract These Application
More informationAVAYA 9608 & 9611G IP DESKPHONE INSTRUCTIONS
AVAYA 9608 & 9611G IP DESKPHONE INSTRUCTIONS 1 MESSAGE WAITING INDICATOR PHONE DISPLAY NAVIGATION ARROWS and the OK BUTTON PHONE BUTTON MESSAGE BUTTON CONTACTS HISTORY HOME HEADSET SPEAKER VOLUME BUTTON
More informationInstalling the TAPI Support Software
Installing the TAPI Support Software To install and set up the TAPI 2.1-compliant software, use the following steps: 1. Start Web Portal. 2. Click the Options tab. 3. Click the PC Integration tab. 4. Click
More informationIP Softphone for Windows Mobile 5. Release 3.0 Getting Started
IP Softphone for Windows Mobile 5 Release 3.0 Getting Started 16-300135 Issue 1 November 2006 2 Avaya IP Softphone for Windows Mobile 5 The Avaya IP Softphone for Windows Mobile 5 brings full-featured,
More informationHow To Use Touchtone.Com'S Digital Phone Service Web Portal User Guide (For Ip Phones) On A Pc Or Ip Phone (For A Cell Phone) On Pc Or Mac) On Your Ip Phone On A Mac Or Ip Cell Phone On
Digital Phone Service Web Portal User Guide TouchTone provides subscribers an easy-to-use Web-based administrator portal to help manage your IP phone s features and call routing functions. In this document
More informationHow to Access Coast Wi-Fi
How to Access Coast Wi-Fi Below is a summary of the information required to configure your device to connect to the coast-wifi network. For further assistance in configuring your specific device, continue
More informationVoIP Handset User Manual. Digital Voice Quality Business Grade Handset Easy Plug & Play
Digital Voice Quality Business Grade Handset Easy Plug & Play Table of Contents 1.0 Getting Started... 1 1.1 Unpacking the box... 1 1.2 Assembling the Phone... 2 2.0 Phone Button Features... 3 3.0 Phone
More informationP-2024. Quick Start Guide. VoIP Analog Telephone Adaptor DEFAULT LOGIN. IP Address http://192.168.5.1 Password 1234. Version 3.60 7/2007 Edition 1
P-2024 VoIP Analog Telephone Adaptor Quick Start Guide Version 3.60 7/2007 Edition 1 DEFAULT LOGIN IP Address http://192.168.5.1 Password 1234 Copyright 2007. All rights reserved. Overview Use your P-2024
More informationHow To Wire An Extron Ip Link Device To A Cell Phone With A Sim Sim Sim Card (Ipl) For A Sim Card With A Power Adapter (Iphones) For An Extravoy) For Free (For A Simio)
poly_5_6486_1.pkn Revision: 4/1/013 This document provides additional assistance with wiring your Extron IP Link enabled product to your device. Different components may require a different wiring scheme
More informationQuick Start Guide: MyNetFone VoIP App
Quick Start Guide: MyNetFone VoIP App App Setup 1. Download the MyNetFone VoIP App from itunes onto your iphone and open the App. 2. Select the Settings menu in the bottom left corner, and then select
More informationAll Rights Reserved. Copyright 2006
All Rights Reserved Copyright 2006 The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any means, without the written permission of the copyright
More informationCisco VoIP 79XX Phones Reference Guide ICIT Technology Training and Advancement training@uww.edu. Updated on 7/11/2014
Cisco VoIP 79XX Phones Reference Guide ICIT Technology Training and Advancement training@uww.edu Updated on 7/11/2014 1 TABLE OF CONTENTS 2 Phone Overview... 4 2.1 Phone Terms... 5 3 Operating Your Phone...
More informationApplication Notes for Biamp AudiaFLEX VoIP-2 with Avaya IP Office Issue 1.0
Avaya Solution & Interoperability Test Lab Application Notes for Biamp AudiaFLEX VoIP-2 with Avaya IP Office Issue 1.0 Abstract These Application Notes describe the configuration steps required for Biamp
More informationUniCom with Office Communicator and Live Meeting. Quick Start Guide
UniCom with Office Communicator and Live Meeting Quick Start Guide Table of Contents Understanding UniCom and Office Communicator... 1 What is UniCom?... 1 What Is Office Communicator?... 1 Who Can Use
More information<Insert Picture Here> Contact Center Anywhere: Interaction Manager (IM) Overview
Contact Center Anywhere: Interaction Manager (IM) Overview What is Interaction Manager? Interaction Manager is the software that each call center agent uses to take and place customer
More informationConfiguration Notes 283
Mediatrix 4400 Digital Gateway VoIP Trunking with a Legacy PBX June 21, 2011 Proprietary 2011 Media5 Corporation Table of Contents Table of Contents... 2 Introduction... 3 Mediatrix 4400 Digital Gateway
More informationSIP Trunking using Optimum Business Sip Trunk Adaptor and the Zultys MX250 IP PBX
SIP Trunking using Optimum Business Sip Trunk Adaptor and the Zultys MX250 IP PBX Table of Contents Goal 3 Prerequisites 3 Zultys MX250 Configuration 4 Network Settings 4 Phone Registration and Assignment
More informationWave 4.5. Wave ViewPoint Mobile 2.0. User Guide
Wave 4.5 Wave ViewPoint Mobile 2.0 User Guide 2014 by Vertical Communications, Inc. All rights reserved. Vertical Communications and the Vertical Communications logo and combinations thereof and Applications
More informationContents. Cbeyond Communicator for Mobile (ios) extends TotalCloud Phone System (TCPS) calling capabilities to an iphone.
Cbeyond Communicator for TotalCloud Phone System for Mobile Cbeyond Communicator for Mobile (ios) extends TotalCloud Phone System (TCPS) calling capabilities to an iphone. Cbeyond Communicator is an intuitive
More informationPremium Design Phone with Smartphone Connect
Smartphone Connect App Guide Premium Design Phone with Smartphone Connect Model No. KX-PRW130 Thank you for purchasing a Panasonic product. This document explains how to use the Smartphone Connect app.
More informationCRESTRON-APP-ANDROID Control App for Android
1 Introduction The app from Crestron provides a Smart Graphics touch screen user interface on Android devices. Fully integrated with Crestron programming software including Crestron Studio, VT Pro-e, and
More informationAVAYA 9608/9611G SIP DESKPHONE INSTRUCTIONS
AVAYA 9608/9611G SIP DESKPHONE INSTRUCTIONS MESSAGE WAITING INDICATOR PHONE DISPLAY NAVIGATION ARROWS and the OK BUTTON PHONE BUTTON MESSAGE BUTTON CONTACTS HISTORY HOME HEADSET SPEAKER VOLUME BUTTON MUTE
More informationMTS Hosted Unified Business Mobile Communicator iphone User Guide
MTS Hosted Unified Business Mobile Communicator iphone User Guide www.mts.ca 2 Product release version: 10.4 Document version: 1.03 Date: February 4, 2015 The information in this document is believed to
More informationCisco VoIP 8961/9951/9971 Phones Reference Guide ICIT Technology Training and Advancement training@uww.edu
Cisco VoIP 8961/9951/9971 Phones Reference Guide ICIT Technology Training and Advancement training@uww.edu Updated on 8/1/2014 TABLE OF CONTENTS Phone Overview... 4 Phone Terms... 5 Operating Your Phone...
More information8x8 Virtual Office Mobile User Guide for ios
8x8 User Guide for ios Works with iphone, ipad and ipod Touch Version 4.0, October 2012 The Champion For Business Communications Table of Contents Introduction...3 Features...3 Technical Requirements...4
More informationVOICE OVER IP USER S MANUAL
VOICE OVER IP USER S MANUAL Your User Name: Your Password: Your Prefix No.: Your H323 ID: Your Extension No.: PI Gatekeeper IP Address: 4.38.32.22 i. INDEX i. INDEX..............................................................
More informationCisco SPA302D Mobility Enhanced Cordless Handset
USER GUIDE Cisco SPA30D Mobility Enhanced Cordless Handset Contents Chapter 1: Getting Started 1 Overview 1 Understanding Your Cisco SPA30D Cisco SPA30D Display Screen 4 Turning the Handset On and Off
More informationConfiguring the wireless security of your Linksys Wireless-N router through the web-based setup page
Contents Configuring the wireless security of your Linksys Wireless-N router through the web-based setup page.. 2 Checking the Linksys router s wireless settings through the web-based setup page and adding
More informationStep-by-Step Setup Guide Wireless File Transmitter
EOS Step-by-Step Setup Guide Wireless File Transmitter Server Mode Infrastructure & Ad Hoc Networks Macintosh OS X 10.5-10.6 2012 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part
More informationFrequently Asked Questions
Frequently Asked Questions Contents Installing Lync 2010 Setting Up Devices Managing Contacts Using Lync 2010 as a Phone Using Lync 2010 with Office Outlook Scheduling Meetings Inviting People to Meetings
More informationUsing your ios device, open the App Store, Search for, download and install the WeMo App.
Setting up WeMo is incredibly simple. All you need is: Your WeMo Switch and WeMo Motion An appliance you'd like to control iphone, ipod Touch or ipad Wi-Fi Router Using your ios device, open the App Store,
More informationCisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)
Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP) First Published: July 22, 2011 Last Modified: July 22, 2011 Americas Headquarters Cisco Systems,
More informationVoIP Audio Setup - PC Users
VoIP Audio Setup - PC Users To select and test your Mic & Speakers settings 1. Right-click the icon in the PC system tray and select Preferences. 2. Select Audio. Microphone Setup - It is recommended that
More informationVoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
VoiceGear/3CX Integration Guide Ver.0.1 Page 2 1. OVERVIEW... 3 1.1 SETTING UP 3CX PBX...4 1.2 SETTING UP VOICEGEAR GATEWAY...5 2. VOICEGEAR-3CX SIP INTEGRATION... 6 2.1 3CX CONFIGURATION...7 2.2 VOICEGEAR
More informationVIP-102B IP Solutions Setup Tool Reference Manual
VIP-102B IP Solutions Setup Tool Reference Manual Table of Contents Overview...5 System Requirements for Managed VoIP Products...6 Term Definitions...7 Main Application Window...8 Legend Description...9
More informationMobile Connect for USA Mobility Pagers for iphone
User Guide for Mobile Connect for USA Mobility Pagers for iphone Amcom Software, Inc. Copyright Mobile Connect 3.5 Document Version 1.0 Last Saved Date: September 19, 2013 Copyright 2003-2013 Amcom Software,
More informationBefore you begin. Once you have your wireless network name and network security key, follow the steps below on your wireless device.
The Wireless Home Networking gateway from Northwestel allows you to connect your wireless-enabled devices to the Internet. To configure a device to connect to your wireless home network please follow the
More informationRingCentral for Salesforce. User Guide
RingCentral for Salesforce User Guide Table of Contents Table of Contents 3 Introduction 3 About RingCentral for Salesforce 3 About This Guide 4 Basics 4 Options 5 Log in 6 Placing Calls 7 Placing an International
More informationDocuSign Connect for Salesforce Guide
Information Guide 1 DocuSign Connect for Salesforce Guide 1 Copyright 2003-2013 DocuSign, Inc. All rights reserved. For information about DocuSign trademarks, copyrights and patents refer to the DocuSign
More informationApple OS / ios Installation Guide Includes MAC OSx and ios based devices
Apple OS / ios Installation Guide Includes MAC OSx and ios based devices Updated 8/10/2012 This page intentionally left blank Using SPOT on a Apple OS Device... 4 Summary... 4 Requirements... 4 Usage and
More informationIf you need additional assistance please contact our Technical Support Center at 24 hours a day, 7 days a week.
Cisco SPA 2100 Phone Adapter Installation Manual Index Installation of the Cisco SPA 2100 Phone Adapter to NationPhone P. 1 Index, before you begin, and what is included P.2 Installing the NationPhone
More informationPREDICTIVE DIALER AND REMOTE AGENT SETUP GUIDE
PREDICTIVE DIALER AND REMOTE AGENT SETUP GUIDE RELEASE 7 VOICENT AGENTDIALER TM TABLE OF CONTENT I. Overview II. Install and Setup Server III. Test AgentDialer on the Server IV. Use a better headset V.
More informationGlobal Monitoring + Support
Use HyperTerminal to access your Global Monitoring Units View and edit configuration settings View live data Download recorded data for use in Excel and other applications HyperTerminal is one of many
More informationCisco IP Phone 8945 User Guide
Cisco IP Phone 8945 User Guide Cisco IP Phone 8945 User Guide... 1 Placing a call... 2 Soft Keys... 2 Status Messages... 2 Forwarding calls to another phone... 2 Transferring a call... 3 Initiating a conference
More informationMAGIC TH6. System Configuration SW Version 2.000
MAGIC TH6 System Configuration SW Version 2.000 1 Basic Settings Starting the Windows PC Software Line interface settings Operating Mode Audio lines Hold Signal Signal Processing Database Connection 2
More informationSTATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM
STATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM Verizon High Speed Internet for Business Verizon High Speed Internet for Business SETTING UP YOUR NEW STATIC IP CONNECTION AND IP ADDRESS(ES) This
More informationImpact Call PC. call001. Impact Call User s Guide
R Impact Call PC call001 Impact Call User s Guide Comdial strives to design the features in our communications systems to be fully interactive with one another. However, this is not always possible, as
More informationHow To Use A Mitel 5340 Ip Phone
silhouette Mitel IP Phone User Reference Guide Release 4.0 Final Contents Introduction...1 Setting your language...1 Setting your language for the web interface...1 Setting your language for the phone
More informationAbout. IP Centrex App for ios Tablet. User Guide
About IP Centrex App for ios Tablet User Guide December, 2015 1 2015 by Cox Communications. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic,
More information8x8 Click2Pop User Guide
USER GUIDE 8x8 User Guide Getting Started with April 2014 Contents Introduction... 3 What s new.... 3 8x8.... 3 Here is how works...4 8x8 Click2Connect.... 4 Requirements.... 4 Installation on Microsoft
More informationIDDERO TOUCH PANELS. Video door phone configuration. www.iddero.com 120719-02
IDDERO TOUCH PANELS Video door phone configuration www.iddero.com 120719-02 TABLE OF CONTENTS 1 INTRODUCTION... 3 2 INSTALLATION... 3 3 INITIAL CONFIGURATION... 4 4 2N HELIOS IP VIDEO DOOR PHONES... 5
More informationMaking and Exporting a Backup
Save and Restore Backups using itunes File Sharing on iphone/ipod touch Making and Exporting a Backup Hiding the keyboard Launch Proloquo4Text by tapping on its icon. If the keyboard is visible, tap the
More informationOfficeSuite Dialer Documentation
OfficeSuite Dialer Documentation Information about OfficeSuite Dialer 1. OfficeSuite users will download the software by logging into the OfficeSuite portal, selecting the Contact Support link, and clicking
More informationDVG-2101SP VoIP Telephone Adapter
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVG-2101SP VoIP Telephone Adapter Before You Begin 1. If you purchased this VoIP Telephone
More informationUniCom Enterprise Phone (Polycom CX600) User Guide
UniCom Enterprise Phone (Polycom CX600) User Guide 1 6 What is UniCom Enterprise?...1 Frequently Used Make a Call...6 What is Microsoft Lync?...1 Call Functions Use Call Controls...7 Who can use UniCom
More informationThis guide is intended to help you troubleshoot problems connecting a wireless device to the Gogo Biz network.
This guide is intended to help you troubleshoot problems connecting a wireless device to the Gogo Biz network. TABLE OF CONTENTS Windows Operating System... 3 Blackberry... 5 Android... 6 Apple Macbook...
More informationUniCom Enterprise Phone (Polycom CX600) User Guide
UniCom Enterprise Phone (Polycom CX600) User Guide 1 6 What is UniCom Enterprise?...1 Frequently Used Make a Call...6 What is Microsoft Lync?...1 Call Functions Use Call Controls...7 Who can use UniCom
More informationCisco VoIP 8941/8945 Phones Reference Guide ICIT Technology Training and Advancement training@uww.edu
Cisco VoIP 8941/8945 Phones Reference Guide ICIT Technology Training and Advancement training@uww.edu Updated on 7/31/2014 TABLE OF CONTENTS Phone Overview... 4 Phone Terms... 5 Operating Your Phone...
More informationBasic Features. In the Phone application. Making a call. Answer or divert calls
Basic Features. Using the Phone applica5on Making a call In the Phone application, enter a number, and press the key to make a call. To change the number, use you have entered. to delete the digits After
More informationONcbx Feature Guide UC Desktop Client
1 Getting Started 1.1 Installation The Quick Start Guide contains the essential information for getting started with the Oxford Networks BroadTouch Business Communicator. Once you receive an email indicating
More informationCONFIGURING VIRTUAL TERMINAL: This is the screen you will see when you first open Virtual Terminal
CONFIGURING VIRTUAL TERMINAL: This is the screen you will see when you first open Virtual Terminal Before you begin you must configure the Options for Virtual Terminal. Click on the Options drop down menu
More informationJoin & Leave Meetings
Join & Leave Meetings There are several ways to join a meeting depending on how you receive the meeting invitation. Joining a meeting doesn t require registration, software installation in advance or configuration.
More informationNetPortal All your documents, direct to your iphone
Copyright Stratospherix 2010 Apple, the Apple logo, ipod, ipod touch, and itunes are trademarks of Apple Inc., registered in the U.S. and other countries. iphone is a trademark of Apple Inc. App Store
More informationVMobile Talk User Guide
VMobile Talk User Guide Table of Contents 1. Description 2 2. Supported Devices 2 3. Installation and Usage 2 3.1. Download 2 3.2. Installation 2 3.3. Account Settings 3 3.4. Advanced Settings 3 3.5. Wi-Fi
More informationIDDERO TOUCH PANELS. Video door phone configuration. www.iddero.com 120130-02
IDDERO TOUCH PANELS Video door phone configuration www.iddero.com 120130-02 TABLE OF CONTENTS 1 INTRODUCTION... 3 2 INSTALLATION... 3 3 INITIAL CONFIGURATION... 4 4 2N HELIOS IP VIDEO DOOR PHONES... 5
More informationHRG Performance Series DVR DDNS Support Application Note (hrgddns)
HRG Performance Series DVR DDNS Support Application Note (hrgddns) This document describes how to enable and configure Dynamic DNS (DDNS) functionality on the HRG Performance Series digital video recorder
More informationSetting up Channel-21 Secure RSS CEP on
Setting up Channel-21 Secure RSS CEP on Important Information About C21 CEP Podcasts itunes iphone / ipad Android Phone/Tablet Demo Videos Important Information about Channel-21 CEP Channel-21 Digital
More information