EXPERIENCE AT KEDGE BUSINESS SCHOOL

Transcription

1 Dominique Estampe Professor Supply Chain Director ISLI KEDGE BS PROFESSIONAL EDUCATION 2009 Doctorate in Supply Chain Management, Ecole Centrale de Paris 1979 Engineer in Electronic and Information Technologies, Bordeaux University, Electronic Engineering School - Ecole Nationale Supérieure Electronique, Informatique & Radiocommunication- ENSEIRB, Talence, France EXPERIENCE AT KEDGE BUSINESS SCHOOL Courses taught Supply Chain Simulation, MS & MSc ISLI Supply Chain audit, MS & MSc ISLI Supply Chain performance, MS ISLI Supply Chain Management introduction, MS ISLI Design Physical Flow (Case study Assembly plant Renault, Video), MS ISLI Design Information Processes (Case study), MS ISLI GRAI methodology, MS ISLI Operation Management, PGE Research Activities Logistics Simulation, PGE Procter & Gamble Research Project Product segmentation and physical distribution network Prodige Research project ANR Real time information in Supply Chain Management Advising Students, Directing Projects and Admission Juries Directing PRO-ACT Projects: 4/year Admission Jury president: 10/year

2 Dominique ESTAMPE 2 Other Academic Activities (Program Committees, Links with the Business Community and Institutions of Higher Learning) AIRL (International Research in Logistics Association) President ASLOG (French Association in Logistics) - Member of the Board AFNOR - Member of Logistics Expert Committee CSCMP (Council of Supply Chain Management Professionals): Member of France Chapter Committee SUPPLY CHAIN COUNCIL (SCC) - Member of Development Steering Committee Member Supply Chain Awards Committee Journal : Supply Chain Forum: An international journal - Editor Journal : Logistique & Management Editor OTHER PROFESSIONAL EXPERIENCE IN TEACHING AND RESEARCH 2014 Conference ELA Research Day - Lisbon - Session Chair th International Research Conference in Logistics and SCM - RIRL Marseille - Session Chair «Les Techniques de l Ingénieur» - Paris- Editor Section Logistics Management Revue «Gestion» - HEC Montréal - Reviewer Journal International Journal of Production Economics - Reviewer P&G - Supply Network Research Center Brussels member research committee 2011 Journal: International Journal of Physical Distribution & Logistics Management - Guest Editor (2011), 41(9) th International Research Conference in Logistics and SCM - RIRL Bordeaux - President Scientific Committee th World Conference on Transport Research 2010 Lisbon - Session Chair 2009 Conference APMS 2009 Bordeaux Session chair 1997 Courses : Operations and Logistics Management, Bulgaria Business

3 Dominique ESTAMPE 3 School- Marcom, 1995 Courses : Operations and Logistics Management, Botswana Business School, Gaborone THESIS SUPERVISIONS Completed Current S CO-S MB S CO-S M Thèses (Doctorat) Thèses (Maîtrise) More than Projets (Maîtrise) S=Supervisor; CO-S=Co-Supervisor; M=Member of the thesis Committee Thesis/Projects Supervised From To Description Thesis, Yassine Benrqya - Product segmentation and physical distribution network, Co supervisor Thesis, Sakina Brahim-Djelloul, Real time information in Supply Chain Management, Co supervisor

4 Dominique ESTAMPE 4 From To Description Master thesis supervisor on subjects : - How to buy Supply Chain Services? From the choice to the contract. - How to go from a local to a global Supply Chain network? - How to Trust and collaborate with a Logistics Provider? - How to redesign a Supply Chain in uncertain environment? - How to link Product design and Supply Chain design? - How to implement a last mile supply chain? - How to use real time information in supply chain? - How to integrate the Supply Chain manager in the organisation? - How to in-source logistics services? - How to optimize the outsourcing strategy in the point of Supply Chain Management and innovation? EXTERNAL/INTERNAL RESEARCH GRANTS From - To Source Project Type** Amount P&G Develop and validate models for dynamic management of multi typology flow in FMCG Supply Chain. G ANR Prodige (Intelligent product) Real time information in Supply Chain Management G BUSINESS EXPERIENCE Period Name of Company, Location, Position held. Describe activities Société Générale des techniques Nouvelles-SGN - Consultant in reengineering processes and implementation of information systems BULL - Engineer in Software Development and Test Departement. Design Operating Systems

5 Dominique ESTAMPE 5 PUBLICATIONS Books edited Estampe D. (2014), Supply Chain Performance and Evaluation Models, Éd. 1 (13 octobre 2014), Wiley-ISTE, London Grégoire, L., Akif, J. C., Ducq, Y., Estampe, D., Fougère, C., Jouenne, T.,... & Vuillermoz, J. (2008), Fascicule de documentation FD X50-605: Management de la logistique-performance logistique: de la stratégie aux indicateurs. AFNOR, Paris, France. Blanchard M., Cavaroc J.C., Estampe D. (1983), Modélisation, simulation et évaluation de la partie opérative d un système automatisé, ADI, France Chapters in Books Estampe D. (2010). The role of the sales organization in predicting demand: Qualitative Sales Forecasting in Predicting Demand - Fundaments and latest developments. Henry Stewart Talks, London. Estampe D. (2006), Demand Management in Handbook Global Supply Chain Management Mentzer J.T., Myers M.B., Stank T.P., Sage Publications, London. Articles published in refereed journals BenrqyaY., Estampe D., Vallespir B., Babai M.Z. (2014), Impact of product characteristics on distribution strategy selection, Supply Chain Forum: An International Journal (publishing in process) Estampe D., Lamouri S., Paris J., Brahim-Djelloul S. (2013). A framework for analysing supply chain performance evaluation models. International Journal of Production Economics, 142(2), doi: /j.ijpe Brahim-Djelloul S., Estampe D., Lamouri S. (2012), Real-time information management in Supply Chain modeling tools, International Journal of Services operations and Informatics (IJSOI), Vol 7, n 4, pp doi: /ijsoi Michrafy M, Estampe D.,Paul J. (2006), Les liens entre les indicateurs financiers, commerciaux et de la chaîne logistique Gestion : Revue internationale de gestion, Vol 31, n 3, pp Favre Bertin M., Estampe D., Bossu V., Greset D. (2005) What the Supply Chain Manager''s Position Entails Supply Chain Forum : An International Journal, Vol.5, n 2, pp Favre Bertin M., Estampe D., Bossu V., Greset D. (2005), Le métier de Supply Chain Manager, Logistique & Management Vol 12, n 1, pp

6 Dominique ESTAMPE 6 Chandes J., Estampe D. (2003) Logistics Performance of Actors in the Wine Supply Chain, Supply Chain Forum : An International Journal, Vol.4, n 1, pp Estampe D., Paul J., Boschet S., Justin M.N. (2003), Performance financière et Supply Chain des entreprises européennes 2003., Logistique & Management Vol 11, n 1, pp Paul J., Estampe D., Ceccarello C., Neser G. (2002), Indicateurs financiers et intégration de la chaîne logistique., Logistique & Management Vol.1, n 1, pp Bourgeon, B., Constantin, A., Karolszyk, G., Marquot, J. F., Pedrini, S., Landry, S., Estampe, D. (2001). Evaluation des coûts logistiques hospitaliers en France et aux Pays-Bas. Logistique & Management, Vol.9, n 1, pp Diaz A., Estampe D., Charton O., Come B. (2001), Comment adapter sa logistique aux caractéristiques des produits et du marché B to C?, Logistique & Management Vol.9, n 1, pp Estampe D., Gannac S., Hobbs S. et al (2001), Analysis of the Automotive Inbound Supply Chain, Supply Chain Forum : An International Journal, Vol.2, n 1,pp Estampe D., Cotten V., Jouando O. (2000), World Class Supply Chain Management 2000 : La performance des entreprises du secteur électronique, informatique et télécommunications, Logistique & Management Vol.8, n 1, pp Estampe D., Harreguy A., Maldes V. (1999), La performance Supply Chain des acteurs du secteur automobile en France, Logistique & Management Vol.7, n 1, pp Estampe D., Gannac S., Marriott L. (1998), L externalisation dans les établissements de santé, Logistique & Management Vol.6, n 1, pp Clinton S.R., Estampe D., Grondin M. (1998), World Class Supply Chain management: où en sont les entreprises françaises? Logistique & Management Vol.6, n 1, pp Estampe D., Tsapi V. (1997), Européanisation de la logistique : les grandes tendances, Logistique & Management Vol.5, n 2, pp 3-20 Estampe D., Leveque D., Breuil D. (1988), Outils intégrés d aide à la conception de systèmes de production, Revue Automatique Productique Appliquée Vol1, n 4, pp 7-13 Estampe D., (1988), AIP-SD : Un outil d analyse des systèmes de décision, Revue Automatique Productique Appliquée Vol1, n 4, pp Articles published in other journals or magazines Eymery P., Estampe D. (2013), Enjeux de la chaîne logistique Supply Chain management, Référence AG5000, Techniques de l Ingénieur, Paris. Estampe D. (2011), Benchmarking de la Supply Chain, Référence AG5020, Techniques de l Ingénieur, Paris.

7 Dominique ESTAMPE 7 Dudouet C., Estampe D. (2009), Flux pilotés par l'aval ou flux tirés. Référence AG5111, Techniques de l Ingénieur, Paris. Communications published in conference proceedings BenrqyaY., Estampe D., Vallespir B., Babai M.Z. (2014), Impact of product characteristics on distribution strategy selection, 10th International Conference of Logistics Research (RIRL'2014), Marseille, France Brahim-Djelloul S., Estampe D., Lamouri S. (2013), L apport de l application de la technologie RFID dans une Supply Chain intégrant le transport, Congrès International de Génie Industriel - CIGI, La Rochelle, France. Brahim-Djelloul, S., Estampe, D., Lamouri, S., & Deschamps, C. (2013). Product-oriented transportation using RFID technology: A simulation-based study. In Industrial Engineering and Systems Management (IESM), Proceedings of 2013 International Conference on (pp. 1-9). IEEE. Brahim-Djelloul S., Estampe D., Lamouri S. (2012), Cadre de modélisation pour le pilotage dynamique du transport routier à l'aide de technologie RFID, MOSIM 2012, 9th International Conference of Modeling, Optimization and Simulation, Bordeaux, France. Brahim-Djelloul S., Estampe D., Lamouri S., (2011), Real-time information management in Supply Chain modeling tools, Conference IESM'2011, Metz (France). Brahim-Djelloul S., Estampe D., Lamouri S, (2011). Impact de l utilisation de la technologie RFID dans la chaîne de transport sur la performance de la Supply Chain, ROADEF, 2-5 mars 2011, Saint-Étienne,France. Brahim-Djelloul S., Estampe D., Lamouri S., (2011). Real-time information management in supply chain modeling tools. IESM 2009, Metz, France. Estampe D., Brahim-Djelloul S., Lamouri S., Paris J.L. (2009). Cadre d analyse des modèles d évaluation de la performance Supply Chain. 8éme Congrès International de Génie Industriel, Tarbes, France. Estampe D., Brahim-Djelloul S., Lamouri S., Paris J.L. (2009). A framework for analysing supply chain performance evaluation models. IESM 2009, Montréal, Canada. Estampe D., Michrafy M., Genin P., Lamouri S.(2008). Modélisation statistique des performances stratégiques Supply Chain, financières et commerciales et leurs corrélations. In Modélisation, Optimisation et Simulation des Systèmes: Communication, Coopération et Coordination, MOSIM 08, Paris, France. Estampe D., Michrafy M. (2007), Firms achieving excellent supply chain performance are also the ones that perform best in commercial and financial terms, POMS, Dallas, USA.

8 Dominique ESTAMPE 8 Estampe D., Michrafy M. (2005), 7 indicateurs de mesure de performance supply chain, finance et commercial, Proceedings of the conference "Decision : mesures et evaluations"a2id, Talence, France. Gus N., Estampe D. et al. (2002) First Benchmarking in Europe on the SCOR Model, Proceedings of the Supply Chain World Conference, Amsterdam. Estampe D. (1999), Supply Chain Management in Automotive Industry, Proceedings of the Seminario International Sistemas Logisticos, Curitiba, Brazil. Estampe D. (1998), Design of Supply chain systems, Proceedings of the Marketing Exchange Colloquium-American Marketing Association, Vienna, Austria. Estampe D.( 1998), Design decision systems in Supply Chain Management, Proceedings of the European Logistics Congress - European Logistics Association, Lisbon, Portugal. Breuil D., Estampe D. (1995), La logistique Globale dans les PME, Proceedings of the 1ère Rencontres Internationales de la Recherche en Logistique, Marseille, France. Estampe D. (1994), Implementing CALS in European Community, Proceedings of the CALS Expo 94, Long Beach, USA. Estampe D. (1993), A global process of analysis and conception in a logistics system, Proceedings of the 10th International Logistics Congress, Toronto, Canada. Estampe D. ( 1991), Une méthodologie de conception des systèmes logistiques, Proceedings of the 3ème Congrés International de Génie Industriel, Tours, France. Estampe D. Leveque D., Pourcel C. (1987), LANCELOT : L aide à la décision en pilotage d atelier, A decision support system for control aid of manufacturing system, Proceedings of the Convention automatique productique, Paris, France.