How To Buy A Fluorescent Lamp For A Power Lamp

Transcription

1 Microswitches Saia Microswitch Can be used with different levers. Saia ref. XCF8. Pcb mounting pins. 30gr operating Saia Microswitch mm Lever arm mm Lever arm mm Lever arm Saia Microswitch Saia ref. XCH10-J5. Side mounting pcb pins. with 40mm lever arm. 0.3A 250Vac Saia Microswitch Micro Microswitch Micro ref. UM5DE. 5A 250Vac. UL / VDE / CSA approved. Print pins. B7C ZZZZ Micro Microswitch IGT Mini Switch Used in IGT machines. IGT. Ref /W. H IGT Mini switch Cherry DB Microswitch with Gold Contacts Cherry ref. DB3C-BIAA. 0.1A 250Vac. 2.8mm ( ) terminals. UL approved. Used in many pushbutton brands when gold contacts are used. B7C ZZZZ Cherry Microswitch Omron Microswitch Omron ref. SS-5D. 3A 250Vac. UL / CSA approved. Print pins. B7C ZZZZ Omron Microswitch Micro Microswitch Micro ref. UM1DE. 0.1A 250Vac. UL / VDE / CSA approved. Print pins. B7C ZZZZ Micro Microswitch Cherry Microswitch Cherry ref. E62-30A. 5A 250Vac. 2.8mm ( ) terminals. UL approved. H Cherry Microswitch Omron Microswitch Omron ref. SS-5T. 3A 250Vac. UL / CSA approved. 2.8mm ( ) terminals. B7C ZZZZ Omron Microswitch Cherry Dual Switch Cherry ref. E61-42MA. 5A 250Vac. 2.8mm (0.110 ) terminals. UL approved. H Cherry Dual Switch Cherry Microswitch Cherry ref. DB3G-BGAO. 0.1A 250Vac. 2.8mm ( ) terminals. UL approved Cherry Microswitch Cherry Microswitch This switch is widely used for all kind of pushbuttons. Cherry ref. DB5GB1AA. 1A 250Vac. 2.8mm ( ) terminals. UL approved Cherry Microswitch W W W. S U Z O. C O M 113

2 Microswitches Omron Keyboard Switch Omron ref. B3F. Operating force 260 gram. Colour yellow. B7C ZZZZ Omron Keyboard Switch Self Test Switch C&K ref. 8121SHZGE. 1A 120Vac. H Self test switch Single Pole Toggle Switch On-0ff switch. 10A 250Vac. 6.3mm ( ) terminals. UL / CSA approved. H Toggle switch Omron Keyboard Switch Omron ref. B3F. Operating force 130 gram. Colour white. B7C ZZZZ Omron Keyboard Switch Crouzet Microswitch Crouzet ref A 250Vac. 2.8mm ( ) terminals. UL approved Crouzet Microswitch Marquardt Coin Switch Marquardt ref A 250Vac. VDE approved. 2.8mm ( ) terminals Marquardt Coin Switch Tilt Assembly BP A. Tilt hanger BM175 B. Wire BP7750 C. Contact ring BE138-3 D. Tilt bob Otehall Coin Switches Used in many mechanical coin acceptors. Otehall ref. light operating force - BB1RS1 or medium - BB1BS1. Available in light ( up to 0.20 ) or medium ( 0.50 and up ) operating force. 6.3mm ( ) terminals Coin Switch light Coin Switch medium Loose switchwire Anti-Slam Tilt Switch Medium Weight Made with gold flash contact points. Easy to mount on panel or door Anti slam switch Double Pole Toggle Switch Double pole double throw switch. 10A 250Vac. 6.3mm ( ) terminals. UL / CSA approved. H Toggle switch double pole Crouzet Coin Switch Crouzet ref mm (0.250 ) terminals. 5A 250Vac Crouzet Coin Switch Cherry Coin Switch Cherry ref. E51/F mm (0.187 ) terminals. 6A 250Vac. UL / CSA approved Cherry Coin Switch IGT Belly Door Switch Used in newer games such as Game King. IGT Ref.no , replaces H IGT Belly Door switch Anti-Slam Tilt Switch Heavy Weight Made with gold flash contact points. Easy to mount on panel or door. BASW-A20 Anti slam switch S U Z O I N T E R N A T I O N A L Cherry Microswitch Used in casino hoppers. Cherry ref. E13-00H. 15A 250Vac. 6.3mm (0.250 ) terminals. UL / CSA approved Cherry Microswitch

3 LOOKING FOR PRODUCTS? Find don t search! DEDICATED ONLINE DIRECTORIES for Amusement, Gaming, Casino, Kiosk, Theme Park and Vending. Don t buy before you visit. KIOSK DIRECTORY AND BUYERS GUIDE 2007 KIOSKS TERMINALS SOFTWARE EPOS COMPONENTS EVENTS CASINO DIRECTORY AND BUYERS GUIDE SLOTS MULTIPLAYERS LIVE GAMING BETTING COMPONENTS EVENTS APRIL JULY 2008 DIRECTORY AND BUYERS GUIDE GAMING CASINO COIN-OP AMUSEMENT VENDING KIOSKS COMPONENTS JANUARY APRIL 2008 THEME PARKS DIRECTORY AND BUYERS GUIDE 2008 ATTRACTIONS RIDES FEC AMUSEMENTS VENDING SERVICES EVENTS PRINTED DIRECTORIES for Amusement, Gaming, Casino, Kiosk & Theme Parks for your free copy [email protected] Include your products, for details visit or [email protected]

4 Look at our LED replacement! OSRAM, PHILIPS, SYLVANIA Fluorescent Lamps 70% of all artificial light in the world is generated by fluorescent lamps. A fluorescent lamp consumes only about one fifth of the electricity used by an ordinary light bulb. OSRAM, PHILIPS and SYLVANIA are the three largest manufacturers of lighting components in the world. Colour cool white. Average life time of the fluorescent tubes is hours. Watt Length Box content F4T5CW Lamp T5 4W 6-15cm 25 F6T5CW Lamp T5 6W 9-23cm 25 F8T5CW Lamp T5 8W 12-30cm 25 F10T8CW Lamp T8 10W 13-33cm 50 F13T5CW Lamp T5 13W 21-53cm 25 F14T8CW Lamp T8 14W 15-38cm 25 F15T8CW Lamp T8 15W 18-46cm 25 F16T8CW Lamp T8 16W cm 25 F18T8K24CW Lamp T8 18W 24-61cm 25 F18T8K26CW Lamp T8 18W 26-66cm 24 F18T8K28CW Lamp T8 18W 28-71cm 24 F18T8K30CW Lamp T8 18W 30-76cm 24 F18T8-133ST Lamp T8 18W 24-61cm 24 F20T12CW Lamp T12 20W 24-61cm 25 F25T12-28CW Lamp T12 25W 28-71cm 30 F25T12-30CW Lamp T12 25W 30-76cm 30 F25T12-33CW Lamp T12 25W 33-84cm 30 F30T8CW Lamp T8 30W cm 25 F36-133ST Lamp T8 36W cm 25 Fluorescent tubes are only sold per box. Circular Fluorescent Lamps Watt Diameter Box content H Lamp 22W ø16.5cm 12 FC22CW Lamp 22W ø22cm 12 FC32CW Lamp 32W ø31cm 12 FC40CW Lamp 40W ø41cm 12 Plug-in Compact Fluorescent Lamp Replace 150W incandescent lamp. Butterfly model makes a perfect choice for slim illumination. 4 pin plug-in lamp socket. F16D2CW 16W 17W Fluorescent Lamps Replacement for: WMS: and for IGT Gameking/S2000/Vision slant tops and mash. Watt Length Box content H F17T8/CW 17W 24-61cm 25 F12T4/CW Fluorescent Lamp for Atronic F12T4/CW used on Atronic Deal or No Deal. Watt Box content H F12T4/CW Fluorescent lamp for Atronic T2 Fluorescent Lamps Only sold per box of 20 pcs These T2 fluorescent tubes are the latest technology in energy efficient cabinet lighting. We have listed here several types of T2 fluorescent lamps. If you don t find your requested type, please contact our sales department. Ultra slim design only 7mm diameter. Average rated life hours. Diameter 7mm/ inch. Used with special electronic ballasts and fixtures. Made by Osram. Available in Cool white (CW) and Warm white (WW). Used in Aristocrat machines. Blacklight Blue Fluorescent Lamps Used in various applications, like air hockey, money detectors etc. Watt Length F4T5BLB Lamp T5 4W 6-15cm F6T5BLB Lamp T5 6W 9-23cm F8T5BLB Lamp T5 8W 12-30cm F36T8BLB Lamp T8 36W cm Watt Size Colour Kelvin FM6T mm Warm White 3000 FM6T mm Cool White 4000 FM8T mm Warm White 3000 FM8T mm Cool White 4000 FM11T mm Warm White 3000 FM11T mm Cool White 4000 FM13T mm Warm White 3000 FM13T mm Cool White S U Z O I N T E R N A T I O N A L

5 Compact Fluorescent Lamp Osram Dulux S, high quality energy saving lamps. Gives an equal amount of light as traditional fluorescent lamps. Available in standard or cool white colour. G23 Socket. Watt Colour Kelvin Standard White Standard White CW 7 Cool White Standard White CW 9 Cool White Standard White CW 11 Cool White 4000 Electromagnetic Ballast 230V/50Hz for Compact Fluorescent Lamps Super thin version. With mounted lamp holder. For use with 5, 7, 9 or 11 Watt Compact fluorescent lamps. EEI classification: C. Voltage [V]: 230. Size: 18 x 41 x 155mm. Fixing centre [mm]: 140. Protection from overheating: Without thermal cut-out. Encapsulated: No. With mounted lamp holder: G23 Connection: Push-in with lamp holder. Earth terminal: Yes. Frequency [Hz]: Ballast for Compact fluorescent lamps with lamp holder Lighting Tray 240Vac-8W For lamp size 8 Watt. Includes starter and terry clips W lighting tray Compact Fluorescent Lamp Osram Dulux S/E, high quality energy saving lamps. Gives an equal amount of light as traditional fluorescent lamps. Standard white colour or cool white. Model used in Suzo-Happ toppers. 11 Watt. 2G7 Socket. Watt Colour Kelvin Standard White CW 9 Cool White Standard White CW 11 Cool White 4000 Fluorescent for Bally Monte Carlo 24W compact fluorescent. Used behind belly glass on Bally Monte Carlo. H Fluorescent for Bally Monte Carlo Fluorescent Lamp for Bally M9000 Topper Box 36W compact fluorescent lamp for Bally M9000 Topper. H W Compact Fluorescent lamp 12V Illumination Set Full kit for 12V illumination. Kit contains 12V ballast, lampholder for 4 pin compact fluorescent (2G7) base), connected with harness. By using this kit you can avoid 220Vac wiring in your machine. Plastic cover available. UL & CE Approved V illumination set Ballast cover Lighting Set 2x8W 240Vac For 2x F8T5 fluorescent tubes. Set includes ballast 2x 8W, starter, and 4 fluorescent tube sockets Lighting set Lamp Holders for T2 Fluorescent Tubes Spring-mounted insert for firm contact. Lamp base: W4, 3x8, 5D. Material: PC. Colour: White. Style: Surface-mounted lamp holder. Fixing: Fixing holes 2.6mm. Starter: No. Connection: With cable 450mm. Lamp axis [mm]: 7.2. T-Marking: Lamp Holder T2 Lighting Tray 240Vac-15W For lamp size 15 Watt. Includes starter and terry clips W lighting tray W W W. S U Z O. C O M 117

6 Lamp Holders for T5 Fluorescent Tubes Lamp base: G5. Material: PBT GF. Colour: White. Style: Push-fit lamp holder, Fixing: For push-fitting onto the lamp. Connection: Push-in twin terminals 0.5-1mm 2. Lamp axis: 12.0mm. Lamp holder thickness: Lamp holder T5 Starters Ceramic condenser long-life starter. Packed in lots of 10 pcs. * Sold per piece. FS2 FS5* FS11 FS25* W W each Universal 220V 4-80W 22-25W each Terry Clip ø16mm T5 Lamp support for lamps with 16mm diameter. Lamp base: G5. Material: Zinc-coated polished steel. Fixing: Fixing holes for screws M3.5 Lamp axis: 10.3mm Terry clip ø16mm T5 Lamp Holders for T5 Fluorescent Tubes Lamp base: G5. Material: PC. Colour: White. Style: Push-through lamp holder, slot insertion. Fixing: Lateral fixing clips / or M3 slotted fixing foot. Cut-out: 9.7 x 15.5mm. Connection: Single push-in terminal 0.5-1mm. 2 Lamp axis: 14.0mm. Lamp holder thickness: Lamp holder T5 Lamp Holders for T8 Fluorescent Tubes For push-fit onto lamps 26mm diameter. Front cover made out of heat-resistant PBT GF. Pin support for reliable contact. Lamp base: G13. Material: PC. Colour: White. Style: Push-fit lamp holder, lamp 26mm diameter. Fixing: Fixing holes M3. Connection: Push-in twin terminals 0.5-1mm 2. Lamp holder thickness: Lamp holder T8 118 Starter Socket Can be used for all starters Starter socket Socket for Fluorescent Starter Rating: 250V, 660W AWG lead wires. UL listed. H Socket for Fluorescent Starter Starter Holders Material: PC. Colour: White. Fixing: Rear split pins. Connection: Push-in terminal 0.5-1mm 2. IP degree ofprotection: 20. Temperatur marking: T110. Nominal rating: 2/ Starter holder S U Z O I N T E R N A T I O N A L Terry Clips T8 - T12 For fluorescent lamps 26mm diameter. Lamp base: G13. Material: Zinc-coated polished steel. Colour: Chrome finish. Fixing: Fixing holes for screws M4. Lamp axis: 18.0mm Terry clip T8 - T12 Terminal Blocks Nominal rating: 4/380. Temperature marking: T85. Secundary connection: 2 Push-in twin terminals: 1.5mm 2 per pol (L/N). Style: Terminal block. Pole number: 3. Earth bracket: yes. Fuse holder: No. Surpressed capacitor: No. Fixing: For push-fit. Connection: Screw terminals: 2.5mm Terminal block

7 Electronic Ballast for T2 Fluorescent FM Lamps This Ballast is specially designed to work with T2 lamps. Quick start <2 seconds. Switches off automatically with a defective lamp Volt/50Hz. One lamp per ballast. Size: 150 x 22 x 22mm. (LxWxH) Electronic Ballast 6/8 Watt T Electronic Ballast 11/13 Watt T2 Ballast 240Vac 1x 36W / 2 x 18W. Can be used with 32W Circline lamp Ballast Electronic Ballast Used in IGT machines. Used with 8 or 15W lamps. Including polymer fuse. 0.6A, 25Vdc. Ref. no. H R Electronic ballast, 15W H Electronic ballast, 8W Ballast Vac, 15W Ballast Electromagnetic Ballast 230V/50Hz Standard version For use with 8, 10, 13 or 2x8 Watt Compact fluorescent lamps. EEI classification: B1. Voltage [V]: 230. Size: 28 x 41 x 85mm. Stack lenght [mm]: 034. Fixing centre [mm]: 075. Protection from overheating: Without thermal cut-out. Encapsulated: No. Connection: Push-in/IDC terminal. Earth terminal: No Ballast for Compact fluorescent lamp and fluorescent tubes Ballast Ballast 25Vdc. For 22-40W Circline lamps, or 17W fluorescent tube. H R Thin-Lite Ballast for IGT Used with IGT I-Game for the top box round circuline bulb. H Ballast Thin-Lite Ballast for IGT Electromagnetic Ballast 230V/50Hz for T5-4, 6, 8 or 2x4 Watt Tubes Super-slim version. Vacuum-impregnated with polyester resin. Lamp type: T5. Voltage [V]: 230. Size: 26 x 28 x 130mm. Fixing centre: 120. Protection from overheating: Without thermal cut-out. Encapsulated: No. Connection: Push-in terminal. Earth terminal: yes. Frequency [Hz]: 50. Protection class: Class of protection I. EN (Safety). EN (Working method) Electromagnetic ballast Electronic Ballast 12Vdc Input voltage 12Vdc ( Min Max 16V). Output 1x11W or 2x11W. Output voltage max 101V. Case size 127x30x22mm. Easy connection by 6.3mm terminals. UL and CE approved. Cover available. Also used in all Suzo-Happ topboxes Ballast 12Vdc Ballast cover Ballast 110Vac High quality ballast for longer lifetime, guaranteed to deliver proper voltage W 110V W 110V W 110V 6W Ballast for Aristocrat 6w ballast for Aristocrat machines. Setec EBS3-6-T5 (replaces EBS2-6-T5). Ref. No replaces H W Ballast for Aristocrat W W W. S U Z O. C O M 119

8 LED Modules LED Panel Mount Indicators Based LEDs SMD LEDs Incandescent & Neon Lamps Circuit Board Indicators Ceramic LEDs LED Cluster & LED Displays Through-Hole LEDs Power LEDs United Kingdom: CML Innovative Technologies Ltd Beetons Way Bury St Edmunds IP32 6RA Tel.: +44 (0) Fax.: +44 (0) Germany: CML Technologies GmbH & Co. KG Robert-Bunsen-Strasse Bad Dürkheim Tel.: +49 (0) Fax.: +49 (0) [email protected] visit us at: /

9 All popular lamps are packed in easy blisterpacks, ideal for operator use. Upon request we can supply most lamps in bulkpacks of 500 lamps per bag. Wedge Base Lamps 16mm Volt Amp Lif e Packing Wedge Base Lamps 5mm Volt Amp Lif e Packing Coloured Wedge Base Lamps T1-1/2 5mm Packing mm 12V 0.10 Amp red mm 12V 0.10 Amp yellow mm 12V 0.10 Amp green mm 12V 0.10 Amp blue 100 Wire Terminal Lamp 6mm Volt Amp Lif e Packing -2182D Wedge Base Lamps 6mm Volt Amp Lif e Packing Coloured Wedge Base Lamps T3-1/4 10mm Packing mm 12V 0.10 Amp red mm 12V 0.10 Amp blue 100 Bayonet Lamps BA9S Volt Amp Lif e Packing BA9S Miniature Flasher Lamps Packing V - 0.5A 10 Crane Lamp Wedge Base Lamps 10mm Volt Amp Lif e Packing Bayonet Lamps BA15S Volt Amp Lif e Packing Packing V - 10W 1 Xenon 591 Bulb Used in WMS Bluebird tower light. Wedge base. T3-1/4-10mm 14V. Packing H Xenon 591 bulb 1 W W W. S U Z O. C O M 121

10 Coloured Lamp Caps Fit on all T1-1/2 5mm lamps. Sold per 10 pcs Red cap Orange cap Yellow cap Green cap Blue cap Lamp Holder T1-1/2 5mm with Lamp Lamp holder with lamp -286 Lamp Holder Twistlock Double Contact For T1-1/2 5mm wedge base lamps. For 1.5mm - 1 or 2 faces PCB T5 Lamp socket Coloured Lamp Caps Fit on all T3-1/4 10mm lamps. Sold per 10 pcs Red cap Orange cap Yellow cap Green cap Blue cap Lamp Holder T3-1/4 10mm with Lamp Lamp holder with lamp -512 Lamp Socket For T3-1/4 10mm wedge base lamps. No lamp included Lamp socket Lighting Lamp with Holder AMP Lamp Holder fitted with lamp V 1.2W. Used in various machines, like Barcrest etc. -286LH3 Lamp with holder Lamp Holder T1-1/2 5mm with Lamp Lamp holder with lamp Lamp Holder Twistlock For T1-1/2 5mm wedge base lamps. For 1.5mm - 1 face PCB T5 Lamp socket Connection Hand Tool for 286LH3 Lamp Easy to use. Comfortable T-shape Hand tool for -286LH3 Lamp Holder Twistlock For T3-1/4 10mm wedge base lamps. Mounting depth 9.6mm. ø17.8mm T10 Lamp socket H H H B H R Mini-Lamp for Casino Signs Used in progressive signs above slot machines. 2-wire base, T 1.5 (Tivoli style). 28 volts,.04 amps. 28V Clear bulb with base 28V Clear bulb only 28V Blue bulb with base 28V Red bulb with base Lamp Holder with Terminals For T3-1/4 10mm wedge base lamps. PCB mounting T10 Lamp socket 122 S U Z O I N T E R N A T I O N A L

11 Lampholders & Adaptors Starpoint 10mm Wedge Base Lampholder The Starpoint 10mm wedge base IDC lampholder is a plastic injection moulded unit designed for quick and easy installation and removal in panel up to 2mm thickness. It takes standard 10mm wedge base lamps or leds and can be terminated rapidly using the Starpoint air insertion tool or the handtool. Designed for quick, positive clip fixing. Suitable for panels 1mm to 2mm thickness. Accomodates 10mm wedge base lamps or leds. Available with integrally mounted diode or wire link. Termination with 7/0.2mm or 13/0.2mm wire. Colourcoded for easy recognition. Colour B9S ZZZZ 7/02mm wire - Link Yellow B9S ZZZZ 7/02mm wire - Diode Beige B9S ZZZZ 13/02mm wire - Diode White B9S ZZZZ 13/02mm wire - Link Blue Starpoint Universal 5/10mm Wedge Base Lampholder The Starpoint universal lampholder accomodates both 5 and 10mm wedge base lamps or leds in a single housing. The lampholder itselves allows very compact packing density whilst retaining sufficient airflow to dissipate the heat from the lamps. Standard fitted with a diode for use in matrix systems. Accepts both 5 and 10mm lamps or leds in same housing. Simple push to fit and twist and pull removal. Suitable for panels 1mm to 2mm thickness. Very compact design. IDC connection with 7/0.2mm wire. 20,4 13,0 B9S ZZZZ Universal lampholder 16,0 6,7 Starpoint Diode and Link Adaptors These diode and link adapters provide a efficient IDC connection to 6.3mm spade terminals. Available with a link or with a series diode fitted to enable use within matrix harness designs. Fast and efficient connection to 6.3mm spade terminals. Available for 2 wire sizes, 7/0.2mm or 13/0.2mm. Colour coded for easy recognition. G3S ZZZZ G3S ZZZZ G3S ZZZZ G3S ZZZZ Diode adapter 13/0.2mm red Diode adapter 7/0.2mm black Link adapter 13/0.2mm white Link adapter 7/0.2mm beige W W W. S U Z O. C O M 123

12 / LED Products INSIDE Wedge Base LEDS 5mm These LEDS have been designed especially for the gaming market based on superior quality. 5mm - T 1-1/2. Original Nichia LED inside. Real white colour. No colour differences. Single bin product. Wide viewing angle º. Available in 6 and 12V. Datasheet available upon request LED 5mm 6V white LED 5mm 12V white (1) Absolute maximum ratings: Item Absolute Max Rating Unit Forward Current 30 ma *Pulse Forward Current 100 ma Operating Temperature -30 ~ +85 ºC *Conditions: Pulse width < 10msec and duty < 1/10 (2) Initial Electrical and Optical Characteristics: Ta = 25ºC Item Condition Min Typ Max Unit Luminous Intensity IF = 20[mA] mcd PRODUCT Wedge Base LEDS 5mm 5mm - T 1-1/ or 24Vdc. Wide viewing angle. Competitive pricing. Available in red, yellow, green, blue and white. White leds colour sorted per box. Datasheet available upon request LED 5mm 5V red LED 5mm 5V yellow LED 5mm 5V green LED 5mm 5V blue LED 5mm 5V white LED 5mm 12V red LED 5mm 12V yellow LED 5mm 12V green LED 5mm 12V blue LED 5mm 12V white LED 5mm 24V red LED 5mm 24V yellow LED 5mm 24V green LED 5mm 24V blue LED 5mm 24V white 124 All these Wedge base LED s should not be used in lamp matrix systems. LEDS are the longest lasting,most maintenance free lighting source available. Long lifetime up to hours. Energy saving more then 80%. Very low power consumption and less heat generation. Wedge Base Cluster LEDS 10mm Cluster of 3 LEDS in 10mm housing. Available in 5-12 and 24V. Wide viewing angle. Available in red, yellow, green, blue and white. White leds colour sorted per box. Datasheet available upon request Cluster LED 5V 10mm red Cluster LED 5V 10mm yellow Cluster LED 5V 10mm green Cluster LED 5V 10mm blue Cluster LED 5V 10mm white Cluster LED 12V 10mm red Cluster LED 12V 10mm yellow Cluster LED 12V 10mm green Cluster LED 12V 10mm blue Cluster LED 12V 10mm white Cluster LED 24V 10mm red Cluster LED 24V 10mm yellow Cluster LED 24V 10mm green Cluster LED 24V 10mm blue Cluster LED 24V 10mm white S U Z O I N T E R N A T I O N A L Wedge Base LED s 10mm Single LED s. Extremely competitive pricing. Available in 12V only. T3-1/4-10mm size. Available in 5 colours Single LED 10mm 12V yellow Single LED 10mm 12V green Single LED 10mm 12V blue Single LED 10mm 12V white All these Wedge base LED s should not be used in lamp matrix systems LED Insertion Tool Handy tool to avoid damage to LED resistor and static electricity. Also prevents blisters when inserting many LEDs. For 5mm Wedge T 1-3/4 base LEDs. H LED Insertion tool

13 Towerlight LED This led has been designed for use in towerlights where 12V wedge base lamps are used. Decreases power consumption by 60%. Avoid time consuming replacements of lamps in this difficult location in your machine. 10mm wedge base fitting. 12V 40mA. Only available in white colour Towerlight LED Starpoint 5mm LED These leds are designed for use in Starpoint series 2 buttons and other pushbuttons. Mounting pins ensure perfect connection in series 2 lampholder. Replaces 5mm wedge base lamps. Only available in white. Detailed datasheet available. 12Vdc. C9C ZZZZ White LED 5mm Tivoli Base LEDS 28V Used in progressive jackpot signs above slotmachines. 2-wire base T1.5 (Tivoli style) Tivoli LED 28V red Tivoli LED 28V yellow Tivoli LED 28V green Tivoli LED 28V blue Tivoli LED 28V white Flexible Neon LED Rope Lights Diffuse led illumination. Looks like real neon. Available in red, green, warm white, ultra pink and blue colour. All 12Vdc, blue colour is also available in 24Vdc. Consumes 9.4W per meter. Can be bend to a minimum radius of 4cm. Can be cut to desired length. Sold per meter, complete drum holds 50 meter. End caps and connecting clips also available. QL0011 QL0012 QL0013 QL0014 QL0015 H H H QL0017 QL0019 QL0011 Red QL0012 Green QL0013 White QL0014 Ultra Pink QL0015 Blue Red neon led 12Vdc Green neon led 12Vdc W/White neon led 12Vdc Ultra pink neon led 12Vdc Blue neon led 12Vdc Blue neon led 24Vdc End cap Male connecting clip Aluminium channel 1mtr PVC Channel 1mtr Light Pro LED Lamp Assembly Stop changing fluorescents and replacing ballasts! LED lamp assembly replaces traditional fluorescents. End caps can be removed and adjusted to maximize lighting. For IGT machines simply plug the LED assembly harness into the lead that goes into the 24v electronic ballast. Custom configurations and other sizes available. Mounts in fluorescent sockets same as a fluorescent. Super bright flat LEDs in round clear 5/8 tube. 5-year life expectancy, low power, low heat, mercury free; up to 78% in energy savings. No ballast required; saves you money on replacement and maintenance costs. For other machines, use 24V line. RoHS compliant. Low current 24V AC/DC. Custom Sizes Available. H H H Tivoli Base LED String Light Pro F15/T8 LED Lamp Assembly Light Pro F6/T5 LED Lamp Assembly Adapter Harness for Aristocrat Games 100 mtr / 330 ft per roll. Standard available in 28V - white, other voltages and/or colours available upon request. LED distance: 17.78mm / leds per roll Tivoli led string 28V white Connector View Tivoli Base LEDS 12V 2-wire base T1.5 ( Tivoli style ). Only available in white Tivoli led 12V white Flexible Flat LED Rope Lights Durable and superbright. Available in amber, red, green or blue colour. All 12Vdc. With 36,108 or 144 leds per meter. Cut to desired length. QL0001 QL0002 QL0009 QL0010 QL0003 QL0004 QL0005 QL led amber / 36 led red 12V mixed 36 led red 12V / 36 led blue 12V mixed 36 led blue 12V 36 led green 12V 108 led red 12V 108 led green 12V 144 led red 12V 144 led amber 12V Round LED Rope Lights 36 leds per meter. Cut to desired length. 12Vdc. QL0007 QL0008 Red led ropelight round Amber led ropelight round W W W. S U Z O. C O M 125

14 * Graphic Panel not included * Graphic Panel not included Slant Top Display Side Panels Replaces F4 lamp and entire fixture assembly. Metal housing stabilizes brackets from falling out. Improved colour dispersion without shadows. Direct replacement, plug-in convenience. 5-8 year life span. Low heat generation, 70% lower power consumption. Easy to install, no tools required. Power cord supplied for direct plug-in, operates on 12 volts DC. H H Display Panel for 17 Slant tops Display Panel for 19 Slant tops * Validator Bezel not included Slant Top Bill Validator Displays Greatly improve your bill face lighting. Direct replacement, plug-in convenience. Equipped with connector to interface with machine harness. Low heat generation, 50% lower power consumption. Easy to install, no tools required. Operates on 13.5 volts DC. H H Slant Top Display, white LEDs Slant Top Display, Yellow/Green LEDs 6000 Denom LED Panel for Bally Direct LED display replacement panel. Contains two LED boards, replacing original incandescent lamps. Equipped with connector to interface with Bally power harness. Installed in minutes, no special tools required. 5-8 year life span with 75% lower power consumption. Operates on 7.5 volts DC or AC. H * Validator Bezel not included 6000 Denom LED Panel S2000 Bill Validator Display Board LED lighted PCB with new bracket. Bright green bill face and yellow panel. Equipped with connector to interface with original machine harness. Installed in minutes with only a screwdriver. 5-8 year life span. Operates on 12 volts DC. H Bill Validator Display Reel Denom Area LED Board Replaces the incandescent lamp on reel machines. Direct plug-in solution, brighter than the original lamp. H Reel Denom Area LED Board H H High Intensity LED for IGT Games Replaces F14 or F15 fluorescent lamp in IGT 17 and 19 top boxes and upright belly glass. Diamond cut diffusing panel provides even illumination. Easy installation, just remove the fluorescent lamp, pop in the LED panel and the ballast power plug goes directly into the LED panel. Low power consumption means less heat generated. Used in H IGT 17 & 19 Top Box F14 Replacement with horizontal plug configuration H IGT 17 & 19 Top Box F14 Replacement with vertical plug configuration H IGT 17 & 19 Top Box F15 Replacement with horizontal plug configuration H IGT 17 & 19 Top Box F15 Replacement with vertical plug configuration H IGT Upright Belly Glass F15 Replacement with Drop-in bracket system 126 * Graphic Panel not included LED Denom Arrow Panels Direct replacement, plug-in convenience year life span. Equipped with connector to interface with machine harness. Low heat generation, 50% lower power consumption. Easy to install, no tools required. Operates on 12 volts DC. H H Arrow panel for IGT Game King Upright Arrow panel for I Games Ticket Printer Arrow LED Boards Save money by replacing original boards that prematurely burn out. H H Ticket Printer Arrow LED Board, IGT Slant Tops Ticket Printer Arrow LED Board, IGT Uprights S U Z O I N T E R N A T I O N A L LED Edge-Lit Panel for Konami Belly Glass Replacement for all Konami belly glass that is currently edge-lit with cold cathode lamps. Powered by 12 volts directly, so there is NO inverter, ballast or adapter needed. Just plug the power cord directly into the existing Molex connector that currently provides 12 volts of power to the CCFL inverter. LED s will not break when the Drop Crews let the door drop and then slam it closed. H LED Edge-Lit Panel for Konami Belly Glass

15 Denom Panel LED Board for IGT S2000 Replaces incandescent lamps with crisp white LED display. Decreases power consumption by 60%. Powered by integrated connector interface from existing machine socket. Easy installation; no modification, rewiring, cutting or drilling necessary. Operates on existing 13.5V power supply. H Denom Panel LED Board for IGT S2000 Belly Glass LED Display Panel for IGT Specially designed LED array using the latest LED driver technology. Custom designed mounting bracket. Bolts easily onto existing door panel, no modifications needed. No ballast required, providing additional energy savings. Return on investment is typically less than one year. H Belly Glass LED Display Panel for IGT Lighting / CCFL Products Energy efficient converting more energy to light output instead of heat, uses 75% less power. Ideal for gaming panels and lighting signage. Provides bright white lighting at 6.500º K, significantly less heat than fluorescent lamps. Long life lasting more then hours. Cold Cathode Lamps All lamps includes acrylic protection covers. Available in 325 or 400 millimeter length. UL approved. H UL H UL Cold cathode lamp 3.0 x 325mm Cold cathode lamp 3.0 x 400mm Cold Cathode Lamps with Reflector All lamps includes acrylic protection covers. Available in 325 or 400 millimeter length. Included painted reflector for better light output. UL approved. H UL H UL Cold cathode lamp 3.0 x 325mm Cold cathode lamp 3.0 x 400mm Cold Cathode Lamps for LCD Monitors Raw cold cathode lamps without any wire harness attached. To install just un-solder the old cold cathode lamps from the existing wire harness and re-solder the new lamp. Aristocrat H CCFL for Aristocrat 15 LCD H CCFL for Aristocrat 17 LCD H CCFL for Aristocrat 19 LCD Atronic H CCFL for Atronic 15 LCD H CCFL for Atronic 17 LCD H CCFL for Atronic 19 LCD Bally H CCFL for Bally 15 LCD H CCFL for Bally 19 LCD H CCFL for Bally 20 LCD H H H H H H H H IGT CCFL for IGT 10 LCD CCFL for IGT 15 LCD CCFL for IGT 17 LCD CCFL for IGT 19 LCD Konami CCFL for Konami 17 LCD CCFL for Konami 19 LCD WMS CCFL for WMS 19 LCD CCFL for WMS 22 LCD LED Display Board for Large Graphic Panels LED board for large belly glass and topper graphic panels Ideal replacement for S2000, most slant top machines, and upright video poker topper panels. Two minute installation with no modifications to original hardware or wiring. Consumes 1/6th of the energy versus a standard fluorescent lamp. Special hardware packs sold separately. H LED Display Board for Large Graphic Panels Steel Clip for Cold Cathode Lamps Will hold all cold cathode lamps with acrylic cover. H Steel clip Inverters for Cold Cathode Lamps For use with 1 or 2 cold cathode lamps. UL approved. Connection cable sold separately. 50W MR16 Projection Lamp 12V, 50W projection lamp with 30 degree flood beam spread. Used in casino signs K colour temperature life hours. 2-pin GX5.3 base. H MR16 Projection Lamp Power Harness Extension To connect 2 CCFL inverters to 1 powersupply or 1 power harness. Length: 120cm. H Power harness extension H UL H UL H UL H UL Inverter for x 325mm CCFL Inverter for x 400mm CCFL Inverter for x 325mm CCFL Inverter for x 400mm CCFL Halogen Lamps used in Cranes, Pushers and other Applications BAB EXZ FMW 12V 20W 50mm halogen lamp 12V 50W 50mm halogen lamp 12V 35W 50mm halogen lamp W W W. S U Z O. C O M 127

16 Cold Cathodes for Samsung and AU Optronics LCD Panels For all 15, 17, and 19 Samsung and AU Optronics LCD panels. No connectors or harnessing included. Sold in lots of 10, 25 and 50 pieces. H H H Cold Cathode for 15 LCD Monitor Cold Cathode for 17 LCD Monitor Cold Cathode for 19 LCD Monitor Cold Cathode for Bally M9000 Single raw cold cathode for Bally M9000 game with 19/20 Tatung LCD # L19LA25M21LC02 or #L195A25M21LB01. No wiring or connectors included. Rated at hours. H Cold Cathode for Bally M9000 H Cold Cathode for WMS Smart LCD and 19 Fujlysu LCD Single raw cold cathode lamp for WMS slot machine with 19 Smart Technology LCD #SV3190W. Single raw cold cathode lamp for WMS slot machine with 19 Fujlysu LCD. No wiring or connectors included. Rated at hours. H Cold Cathode for WMS Smart LCD Fujlysu No. H FLC48SXC8B- 11AA Cold Cathode for WMS 19 Fujlysu LCD Cold Cathode Assembly for WMS Bluebird For use in WMS Bluebird slot machines that use a 18 LCD monitor. Convenient plug-n-play assembly. 3-cold cathode assembly rated at 70,000 hours. Wiring harness and connectors included. Cold Cathode for Konami Belly Glass and Konami Games Single raw cold cathode lamp for Konami belly glass that is backlit with cold cathode lamps. Single raw cold cathode for Konami games with 19 Kortek LCD monitors. No wiring or connectors included. Rated at hours. H H Cold Cathode for Konami Belly Glass Cold Cathode for Konami Games Cold Cathode for Konami Denomination Panel Single cold cathode assembly for Konami upright video denomination backlit panel. Includes wiring and connector. Rated at hours H Cold Cathode for Konami denomination panel H H Cold Cathode assembly for WMS Bluebird Cold Cathode for Bally I-View Player Tracking System For use on 1st generation IDW or 2nd generation Hitachi 6.2 LCD panel. Rated at hours. H H For IDW LCD panel For Hitachi LCD panel Cold Cathode for WMS Bluebird Triple cold cathode replacement assembly for WMS Bluebird slots with 17 LCD monitor. Includes three hour cold cathode lamps, attached wire harness, connectors and silicone end caps. Cold Cathode for Konami Machines Dual cold cathode lamp assembly for Konami slot machines with a 17 LCD monitor. Wiring harness and connectors included. Lamps rated at hours H Cold Cathode for Konami machines H Cold Cathode assembly for WMS Bluebird Cold Cathode for IGT Nexgen Player Tracking System For use with Hitachi 6.2 LCD panel. Rated at hours. With or without wiring harness. Sold in multiples of 10. H Cold Cathode with wiring harness Cold Cathode for WMS Bluebird Bonus Screen Single lamp assembly for 6.4 LCD (LG #LB064V02) in WMS BlueBird bonus screen. Includes wiring and connectors. Rated at hours. Cold Cathode for Konami Slots For Konami slot machines with cold cathode edge-lit belly glass. Dual hour cold cathode lamp assembly Includes one aluminum encased dual output 12V Piezo matching inverter. Lamp assembly includes wire harness, silicone end caps and connectors attached. H Cold Cathode for Konami slots Cold Cathode for Atronic Slot Machines For Atronic video slots that use a 17 LCD monitor. Dual 70,000 hour cold cathode lamp assembly. Includes wire harness, silicone end caps, and connectors. H Cold Cathode lamp for Atronic 17 LCD monitors H Cold Cathode for WMS Bluebird bonus screen 128 S U Z O I N T E R N A T I O N A L