Switch Engineering Catalogue No. 7. switches. mec.dk

Transcription

1 Engineering Catalogue No. switches mec.dk

2 Company Since 9 Danish design in-house r&d and production in-line quality control Since its foundation in 9, MEC has been making state-of the-art electromechanical components. Located in a suburb of Copenhagen, Denmark, MEC has earned a reputation as one of the leading European manufacturers of high performance tactile switches. A wealth of know-how has been built up over the years for the benefit of innovative product development and custom solutions. Despite the trend of outsourcing it has been MEC policy to maintain a high degree of vertical integration that enables us to react promptly to customer requests. 9% of all the parts used in MEC switches are produced in-house. With 0% in-line inspection, tight tolerance on all parts and use of only quality materials we position ourselves to reach the highest achievable level within high performance tactile switches. The vertical integration combined with a strong R&D facility enables us to provide custom designs from conception to completion. To be part of a sustainable industrialised world environmental consciousness is crucial. At MEC we have substituted materials to more environmental-friendly alternatives and are recycling as much as possible. Legal authorities are auditing our environmental management system regularly and confirming that our goal is being reached. All MEC products are RoHS compatible. MEC have a well established global distribution network that provides a presence in all parts of the world where electronic manufacturing takes place. Through close contact and continuous product training offered to our distributors we maintain a highly qualified and responsive global distribution network.

3 Table of content Selection guide for caps and accessories..... multimec caps Introduction to s Introduction to Illumination Introduction to Panel Sealed and Foil solutions. A/H/M/ZA B/CC/D DS/ES/FS GAS/GCS JS KS/KBS/KCS NS PS/QS/RS SS/IS/LS TS/US/VS TW/UW/VW WAS/WDS/WPS XS foilmec YS navimec ZCS/ZB navimec module controlmec ZW controlmec Z controlmec module R/RF/RM Q/QM varimec aquamec Extender SS Legends Selection guide for switches multimec switches Introduction to es series switches C/E series switches Technical information Technical Information - spacing Technical Information - module Technical Specifications - series Technical Specifications - series Technical Specifications - s unimec caps and switches Introduction to unimec /00/ Legends unimec switches vario support unimec with multimec caps Technical Specifications Custom Custom products Custom products General Applications Solid Colours Usage Guidelines

4 s and accessories series Selection guide Non-illuminated Non-illuminated & illuminated illuminated SS Ø.mm h=.0 -.mm *for E JS Ø9.mm h=.mm DS Ø9.mm h=.9mm GAS Ømm h=.mm IS Ø.mm h=. -.mm varimec round Ø.;.;.mm h=.-.mm *for E US Ø.mm h=.9mm ZCS Ø.mm h=.mm GCS Ømm h=.mm LS Ø.mm h=.0mm-.mm ROUND Z Ø9.mm h=.0mm ZW Ø9.mm h=.mm aquamec Ø.mm h from front panel=.mm h=.-.mm ES Ø9.mm h=.9mm R/RF Ø0mm h=.0mm RM Ø0mm h=.0mm navimec Ø.mm h=./.mm FS Ø9.mm h=.9mm ZA.x.mm h=.mm PS.x.mm h=.mm XS.x9.mm h=.mm QS.x.mm h=.mm RS.x.mm h=.mm M.0x.mm h=.mm A.x.mm h=.mm TS.x.mm h=.9mm H.x.mm h=.mm C C/D xmm h=.mm SQUARE/RECTANGULAR varimec square.x.;.x.;.x.mm h=.-.mm *for E unimec 00.0x.mm h=.9mm B C/D xmm h=.mm Q xmm h=.0mm KS.x.mm h=9.mm QM xmm h=.0mm K.x.mm KBS.x.mm h=0.mm KCS.x.mm h=0.mm unimec 00.9x.9mm h=.mm YS xmm h=.mm *for E OTHER SS extender for G snap on caps h=-mm TW/UW/VW sealing for TS/US/ /VS NS Ø9./.9mm h=.9mm WAS.x.mm h=.9mm VS.x.mm h=.9mm WDS.0x.mm h=.9mm ZB 90o R=.mm h=.mm WPS.x.mm h=.mm *s are for G if not otherwise specified

5 multimec s & Accessories for the series switches CAPS Many options regarding: shape, size, height, colour and illuminaton solutions: navimec, controlmec, foilmec, varimec, aquamec MEC has a wide range of caps for the multimec switch series. There are many cap series including navimec, controlmec foilmec and aquamec for multimec series switches, and varimec that is still for the series switches. solid colours and transparent colours Overall height varies from.0 mm to. mm

6 multimec s & Accessories for the series switches illumination single- or bi-colour Many options in, cap and lens colour colour options available: blue, green, yellow, white and red. Bi-colour combination can be made with any two colours. Illumination can be full, dot, rectangular or legend.

7 multimec s & Accessories for the series switches MEC cap range includes options for the front panel sealing. We have designed cap options for outdoor, dusty and humid applications - switch solutions that can endure a rough environment. Panel sealed solutions controlmec ZW Panel sealed TS/us/vS panel sealed R & Q series aquamec caps for foil overlay foilmec GAS/GCS JS

8 ,,,,., x.,,, multimec Rocker-action pushbutton caps, GTxxH A GTxxH GTxxH GSxxA GSxxA - - Min., Min., Max., Max.,,, GTxxH GTxxH,,,, - GTZA - - GTZA GTZA, Min., Max, Min.,Min., Max, Max, A G A/H/M/ZA Rectangular caps Rocker-action pushbutton cap. mm x. mm;. mm x. mm;.0 mm x. mm h =. mm Material: ABS/polycarbonate, Temp. Range:,, Solid cap: -0/ C Transparent cap: -0/ C Panel cut-out: A/H-.0 x., M-. x., ZA-9.x. All dimensions in mm, A,,,, - GTZA GTZA GSM GSM GSM - - SMD w/ A TH w/ H TH ZA SMD M - -,,0,0 Min., Max.,, Min., Max., Min., Max.,,, , GTA,Min., Max., Max.,, GTxxH - - Min., Max.,, Min., Max., Min., Max.,,, GTZA H - H - -,,0 Min., Min., Max., Max.,,0,0,,,, ,,,,,0,0,,,,, Illuminated HOW TO ORDER,, Min., Max, GTA -,,,,, Min., Max.,,,,, GTxxH -,,,, Min., Max.,,,,,, GTZA - ZA ZA,,0,,,0,0,,,, GSM GSM - -, -,,0 0,0,0 0 Min., Max, Min., Max,,, G,,,0 GSxxA -,,,, GSxxA GSxxA Max., Min., Max., *For an illuminated quiet.0n switch add Q,0 to the end of the switch part number. Min.,, Max,,, Min.,, Max., non-illuminated HOW, TO ORDER G,,,,,, GTA GTA GTA,0,0,0,0,0 GSM GSM,, GSM,,, Min., Max,,,0 GSM,0, ,,,0 Min.,,0,,, GSM,,,,,,,, - 0 Q* GTxxH GTxxH GTxxH,0,0,0,0,0 -,0 0 0Q,,,,, GSxxA GSxxA - GSxxA Min., Max.,,,0,, blue green GSxxA GSxxA,0 yellow GTZA GTZA white red GSxxA,0 green/yellow GTZA red/green Min., Max. red/yellow,,,0,0,0,,0,, GSxxA Min., Max.,, Min.,, Max.,,,,,, -,,,,,, - - A ZA M Min., Max., A A H A H, H ZA ZA -,, H A Colour code - 00 blue 0 green 0 grey 0 yellow 0 red Colour code H A M M 00 blue 0 H green 0A red 0 grey 0 yellow Colour code A ZA A frosted blue frosted green frosted yellow H M H frosted white frosted red ZA M ZA 0*ultra blue 0*dusty blue *aqua blue mint green tele grey melon M noble red A A H H ZA ZA M M Lens H transparent green yellow frosted white red Colours for A and * colours for ZA: 0*metal dark blue *metal light grey *metal dark grey *metal bordeaux A H ZA M,, M ZA M,0,0 Ordering example: GSH9 H0 with illumination OR GTH9 ZA without illumination OR *GTH900Q (illuminated quiet version). Please see colour codes, updates of products and changes of specifications on M

9 ,,,,,,,,,,,,,, multimec Min., Max.,,,0 Transparent cap: -0/ C,0,,,,,0,, GSBD,,,, GSBD Award winning design of rocker-action cap solution Rectangular caps; square solution Rocker-action pushbutton cap mm x mm h =. mm Material: ABS/polycarbonate Temp. Range: Solid cap and bezel: -0/ C Panel cut-out: B/CC/D-. x.,0,,,, GSBD,,0,,,, GSBD, Min., Max.,,,,, Min., Max.,,, GTBC,, GTBC G B/CC/D Min., Max.,,,,, Min., Max.,,, BD All dimensions in mm GTBC BD SMD BD GSBD GSBD TH BC GTBC, GTxxCC GTxxCC GTBC GTBC GTxxCC GTBC TH w/ CC GTxxCC SMD w/ BD GSxxBD GSxxBD GSxx,0,,, GTxxCC GTxxCC,,,,,0,,,, Min., Max., Min., Min., Max. Min.,, Max., Max.,,0 *For an illuminated quiet.0n switch add Q,0 Min., Min.,, Min., Max.,, Min., Max., to Max. the, Max. end,of the switch part number.,0,,0 SBD,, GTxxCC,,,,,, GTxxCC,,, illuminated HOW TO ORDER G,,,,, non-illuminated HOW TO ORDER,,,0,, G, COLOUR, CODES,,, Min., Max.,, GSBD GTxxCC GTxxCC,, frosted blue,,, GSBD, GTxxCC Min., Max.,, Transparent caps frosted green frosted yellow,, Min., Max.,,,,,,,,,,,,,,,,,0,0,,, Actuation, force,,,,, Min., Max.,, 0, Q*, 0 0Q,0,, GTBC GSxxBD,,, GSxxBD,,, Min., Max.,,,,,,,,,,,,, Min., Min., Max., Min., Max., Max.,,, red/yellow,,0,0,,,,, colour,,, GSxxBD 0 blue green yellow GSxxBD white GTBC red green/yellow red/green,,, code GSxxBD,,, Min., Max.,,,,,, GSxxBD,,,0,0 Ordering example:, GTH9C00C09 with illumination OR GSH9B0D0 without illumination OR *GSH900Q (illuminated quiet version) D Please see colour codes, updates of products and changes of specifications on GSBD GTxxCC, GTBC GSxxBD frosted white frosted red,,,,,,,,,,,0,,,, Min.,,0 Max.,,,, Min., GTBC Max.,,,,,, Min., Max.,,,,,,0,,,, GSxxBD,, Min., Max.,,0,,, Solid caps, 00 blue 0 green 0 grey 0 yellow GSBD GTxxCC GSBD GSBD GTxxCC GTxxCC,,, B C Solid colour B,0 GSxxBD 0 red Solid,,,, Colour,,, B Min., Max.,,,0,,,,,,,0 Min., Max.,, Min., Max.,,,, For CB and C only,,,,, C mint green GTBC GSxxBD GTBC GSxxBD B Transparent GSxxBD 0 ultra blue 0 dusty blue aqua blue GTBC Colour code C Colour C code B D C C C D Lens B C Colour C code D,,,,,0,,,, C D D tele grey metal light grey melon metal dark grey noble red metal bordeaux 0 metal dark blue,, B B C C Colour D code C C B C Colour C code D Colour D code,0,,, Lens Lens, B,, C C Lenses transparent green yellow frosted white red D,0,, 9

10 ,,,9,,,9,9,9,,9,,9 multimec Round cap with soft edges G DS/ES/FS 9,,0 Round caps Ø9. mm h =.9 mm Material: ABS/polycarbonate Temp. Range: Solid cap: -0/ C,0 Transparent cap :-0/ C Panel cut-out: DS/ES/FS-Ø.0 All dimensions in mm 9, Min, Max,,0 TH DS SMD w/ ES TH w/ FS 9, ø 9.,0ø.0 9, 9,,0,0 9,,0 ø 9. ø 9. ø.0 ø Min., Max. Max, ,0,0,0 Min. Max. 0. Min. Max Max Max Max Max -, -, Max. ø 0.9.,. Ø0,9 Ø0,9 Illuminated HOW TO ORDER Colour code Lens G Max 0 Q* *For an illuminated quiet.0n switch add Q to the end of the switch part number. non-illuminated HOW TO ORDER 0 blue green yellow white red green/yellow red/green red/yellow ES FS DS ES ES FS FS 00 blue 0 green 0 grey 0 yellow 0 red transparent frosted white transparent green yellow frosted white red Colour code ES G 0 0Q DS 00 blue 0 green 0 grey 0 yellow 0 red ES FS 0 ultra blue 0 dusty blue aqua blue mint green tele grey melon noble red 0 metal dark blue metal light grey metal dark grey metal bordeaux FS Ordering example: GTH9DS0 without illumination OR GSH9FS09 with illumination OR *GSH90Q (illuminated quiet version) Please see colour codes, updates of products and changes of specifications on

11 ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, multimec Flat cap can be used with foil overlay GSGAS GSGAS GSGAS GSGAS GSGAS GTGCS GTGCS GTGCS GTGCS GTGCS G GAS/GCS Round caps,0,0,0 Excellent option for foil overlay,0,0 Ø mm; Ø mm h =. mm Material: polyamide Temp. Range: Solid cap: -0/0 C Transparent cap: -0/ C Panel cut-out: GAS/GCS-Ø.; Ø. Min., Min., Max., Min., Max., Max., Min.,Min., Max.,Max.,,, All dimensions in mm GSGAS GSGAS GSGAS GSGAS GSGAS GSGAS GSGAS GSxxGAS GSxxGAS GTGCS GSxxGAS SMD GAS SMD w/ GSxxGAS GAS GSxxGAS TH GCS GTGCS GTGCS GTxxGCS GTxxGCS GTxxGCS GTGCS GTGCS GTGCS GTGCS GTxxGCS GTxxGCS TH w/ GCS,0,0,0,0,0,0,0,0,0,0,0 Max Max Max Max Max Min., Max., Min., Max., Min., Min., Min., Min., Max., Max., Max., Max., Min., Min., Max., Min., Max., Min., Min. Max.,,Min. Max.,, Max., Max.,,0,0 illuminated HOW TO ORDER G GSxxGAS GSxxGAS GSxxGAS GSxxGAS GSxxGAS,0,0,0,0 0 Q* GSxxGAS 0 blue green yellow white red green/yellow red/green red/yellow GTxxGCS GTxxGCS GTxxGCS GTxxGCS Min., Min. Min.,, Min., Min., Max., Max., Min. Max., Max.,, Max., Max., transparent GAS colour GAS GAS GCS Min., Max., Colour code transparent GTxxGCS frosted white Max Max Max Max Max *For an illuminated quiet.0n switch add Q Max to the end of the switch part number. non-illuminated HOW TO ORDER GCS GCS solid GAS colour Colour code G GAS 0 0Q GAS GCS 00 blue 0 green 0 grey 0 yellow 0 red Ordering example: GCS GSH9 GAS09 without illumination OR GTH90 GCS with illumination OR *GTH90Q (illuminated quiet version) Please see colour codes, updates of products and changes of specifications on GCS

12 ,0, 0,,,0,0,,, 0, 0, 0,,,,,, 0, 0,,, multimec Low cap, excellent for foil overlay G JS Round cap Ø9. mm h =. mm GT JS : Material: ABS/polycarbonate Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C Panel cut-out: Min. JS-Ø., R R Max., *Legends on the picture are custom All dimensions in mm 9, TH JS GT JS : SMD w/ JS GSxx JS : R R R Min., Max.,,0 Max,0 9, 9,,0 GSxx JS : R Illuminated,0 HOW TO ORDER Max G 9,,0 transparent J S Colour code 0 Q*,0 0 blue green yellow white red green/yellow red/green red/yellow transparent frosted white non-illuminated HOW TO ORDER solid colour Colour code G J S 0 0Q 00 blue 0 green 0 grey 0 yellow 0 red Ordering example: GTH9JS0 without illumination OR GTH90JS with illumination OR *GTH900Q (illuminated quiet version) Please see colour codes, updates of products and changes of specifications on

13 multimec 9, Square cap with different top surface options, R 9,, 0, G KS/KBS/KCSK,0 Min., Max., Square caps Different top surfaces: flat, convex or concave. mm x. mm h =9. mm; 0. mm; 0. mm, Material: ABS/polycarbonate Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C GTKS Panel cut-out: KS/KBS/KCS-. x.,,, KS SMD w/ KS TH w/ KBS SMD w/ KCS,0 Min., Min. Min.,, Max., Max. Max.,, All dimensions in mm,, R, R, Min., Max., 9, 9, 9,, GSxxKS,,, 9,, GTxxKBS GTxxKBS,,,, 0, 0, Min. Min.,, Max. Max.,, R, R, 9, 9,,, GTxxKBS R,,, Min., Max., GSxxKS GSxxKS 0, 0, 9,, GTxxKBS R R R,0,0,0,0 GSxxKS 9,, 9,, Custom solution 9,, KS KBS, KCS GSxxKCS GSxxKCS 0,, GTxxKBS GTxxKBS,, 0, 0, R, Min., Max., (optional) R R,0,0, 9,, 9, 9, GTxxKBS,,,,,, 0, GSxxKCS,,0, R,, GSxx GSxxKCS,,,,,,,,,, R, R,,, R R, 9, 9, 0, 9, SKS illuminated HOW TO ORDER G Min., Max., *For an illuminated quiet.0n switch add Q KBS KBS KBS to the end of the switch part number. non-illuminated HOW TO ORDER G,,, GTKS KS 9,, KS KS KCS KCS KCS, 0 Q*,0, Min., Max., GSxxKS 9,, 0 0Q 9,,, GTKS, 0 blue KS KS green yellow white red green/yellow Min., Max., Min., red/green Max.,,, KBS red/yellow KBS,,, K S,,,,,0,0, KCS KCS,,,,,, Frosted white lens KS 9,, 9,,,,, GTKS 9,,, GTKS R, Min., Max.,,,, 9,,,, Min., Max.,, GTxxKBS KS KBS, KS Frosted white lens and transparent lid KS KBS 9,, KBS,, KCS GTKS, 0, Min., Max., Min., Max.,,,,,, Colour, code, 00 blue 0 green 0 grey 0 yellow 0 red, 9,,,,,,,,,,,, KS KCS KBS KCS KS KBS KCS,, 0,,,0, R 9,,,,,, KCS GSxxKCS,,, K KS KBS,,,,,,, 0 grey 0 red,,, 0,,0,0 K,, 0 grey 0 red,, 9,,,,,,,,, KCS Ordering example: GTH90KCSK09 with illumination OR GSH9KS09K0 without illumination OR *GTH90Q (illuminated quiet version) Please see colour codes, updates of products and changes of specifications on

14 ,0 9,,0 9,,0 9,,0 9,,,,,,,9,,9,,0,,9,,,,,,9,0, multimec Teardrop-shaped cap G NS Teardrop-shaped cap Ø9. mm; =.9 mm h =.9 mm Material: ABS/polycarbonate Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C Panel cut-out: NS-Ø./ =. 9, SMD NS,9 9,,9,, All dimensions in mm TH w/,9 NS,9 Min, Max, Min, Max,,,,,,,,, R, R, Illuminated HOW TO ORDER transparent Colour code G N S 0 Q* 0 blue green yellow white red green/yellow red/green red/yellow frosted blue frosted green frosted yellow frosted white frosted red *For an illuminated quiet.0n switch add Q to the end of the switch part number. non-illuminated HOW TO ORDER Colour code G N S 0 0Q 00 blue 0 green 0 grey 0 yellow 0 red Ordering example: GSH9NS0 non-illuminated OR GTH90NS with illumination OR *GTH90Q (illuminated quiet version) Please see colour codes, updates of products and changes of specifications on

15 ,,,,,,,,,, multimec Concave rectangular caps E/G PS/QS/RS Rectangular caps Concave top surface. mm x. mm h =. mm Material: ABS/polycarbonate Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C RS Panel cut-out: PS/QS/RS-.0 x.0, R max..0 RS QS All dimensions in mm Max, Max,,, Max, Max,, SMD (E) PS TH w/ (G) RS TH w/ (G) QS Max.. Max.. Max.. 0.,, Min, Max, Min, Max,.. Min. 0. Max Min, Max, Min. 0. Max. 0.. Min, Max,..... Max illuminated HOW TO ORDER. Ø0,9 QS, - RS Max. Ø0,9., -.. Max. - Min. Max. Max., Min. Max Ø0,9.0 ø. Max. ø... ø. Max. ø Min. 0.. Max.. QS.. RS 0.. Min Max....0., Max, , Max Ø0,9.,..0..0, Ø= Colour code Ø0,9.. Lens. G 0 Q* 0 blue green yellow white red Ø0,9.0, - green/yellow red/green red/yellow Max...0 Max. Ø=0.9 QS Min. Max. RS.0.. ø. Max. ø ø. Max. ø.. Ø0,9 Min. 0. Max , - - Ø= blue 0 green 0 grey 0 yellow 0 red.0.0 Ø0,9. transparent frosted white.... *For an illuminated quiet.0n switch add Q Ø0,9 to the end of the switch part number., - Min. Max PS Min. 0. Max transparent frosted white non-illuminated HOW TO ORDER E , - - Ø=0.9.0 Colour code.0 Ø0,9.... G 0 0Q PS 00 blue 0 green 0 grey 0 yellow 0 red Ordering example: GTH9PS0 without illumination OR GSH9RS00 with illumination OR *GSH90Q (illuminated quiet version) Please see colour codes, updates of products and changes of specifications on

16 ,0 -,,0 -,,0 -,,0 -,,, -,,0 -,,0 -,,, -,,0 -,,0 -,,,0 -,,0 -,,0 -,,,,0 -,, -,, -,, -,,0 -,,0 -,,0 -,,0 -,,0 -,,0 -,,,,, -,, -,, -, multimec range with variable heights and illumination options E/G SS/IS/LS SS SS SS Round caps 9 standard options in overall height Ø. mm h =-. mm;.-. mm; -. mm Material: polyamide Temp. Range: Solid cap: -0/0 C (SS); -0/ C (LS) Transparent cap: -0/ C Panel cut-out: SS/LS/IS-Ø.0 LS LS LS All dimensions in mm IS IS IS SS SS SS LS LS LS IS IS IS SMD (E) SS TH w/ (G) LS SMD w/ (G) IS,,,,,,,,,,,, SS,,, LS,,, IS, LS Min Min, Min,, Max Max, Max,, Max Max Max Min Min,, IS Min Max, Max,,, Max, Max Max Max Max Max Max Max Max Max,,, Min, Max, Max Max Illuminated HOW TO ORDER G Min, Max, Max 0 Q* *For an illuminated quiet.0n switch add Q to the end of the switch part number. non-illuminated HOW TO ORDER Max 0 blue, green yellow white red green/yellow red/green red/yellow SS LS with lens IS fully illuminated Colour code 00 blue 0 green 0 grey 0 yellow 0 red transparent frosted white Lens transparent, green yellow frosted white red Min, Max, Max LS Height LS Height IS E G 0 0Q Ordering example: ETH90SS0-09. without illumination OR GSH9IS-9.0 with illumination OR *GTH90Q (illuminated quiet version) Please see colour codes, updates of products and changes of specifications on SS solid colour Colour code 00 blue 0 green 0 grey 0 yellow 0 red Height

17 multimec Panel sealed cap solutions G TS/US/VS TW/UW/VW Square, round and half-ellipse shaped caps Rounded top surface Option to have it panel sealed IP = GTSTW IP = GUSUW IP = GVSVW. mm x. mm; Ø. mm;. mm x. mm h =.9 mm Material: ABS/polycarbonate (cap); silicone rubber (sealing) Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C Panel cut-out: TS-.0 x.0, US-Ø.0, VS-.0 x. All dimensions in mm TS US VS TS US VS US VS TS (w/) (SMD) (through-hole) TS US VS VS VS VS TS TS TS US US US TS US VS (w/) (SMD) (w/) ions (through-hole) (SMD) (through-hole), panel cut-out (w/) (w/) (w/) (w/) (w/) (SMD) (SMD) (through-hole) (through-hole) (SMD) (SMD) (SMD) (through-hole) (through-hole) TH TSTW TH w/ USUW SMD VSVW Recommended,,,,,, *mathematical shape of half-,,0 Min., Min.,, in., Min.,,0 Min., Max, Min. Min., Min., ax,, Min., Max, Max, Min. Min., Min.,, Min., Max, Max Max, Max,, Max, Max Max, Max,, Max,,,,,,,,,,,,,, -,,,,,, - -,,,, ,0,0,0,,0,,,,,0,0,, Ø, Ø 0,9,,,0,, Ø,, Ø, Ø 0,9 Ø 0,9,,,,, ellipse,0 Ø, Ø, Ø, Ø, Ø 0,9 Ø 0,9 0,9 Ø 0,9 Ø 0,9,,,,,,,,,0,0,0,,0,0,0,,0,,0,0,0,0,,,,,,0,,,,9,,0,,,0,0,,,0,0,,0,,,9,9,9,9,9,9,,,,,,,,,,,9,,,9,,9,,9,,9,,9,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,, TS V - x mm US - Ø mm VS Center of switch,,9,9,,,,,9,9,9,,9 Distance between PCB and front panel Illuminated HOW TO ORDER Min., G non-illuminated HOW TO Min.,ORDER G,0,0 Max,,,,,0 0 Q*,,0,,,0 0 0Q TS US TS VS US VS (through-hole),,,0, Min., Max,,,0,,,0,9 Min., Max,, 0 blue green yellow white red green/yellow red/green (w/) red/yellow Ordering example: GSH9 TS0 TW without illumination OR GTH9 US UW with illumination OR *GTH90Q (illuminated quiet version) Please see colour codes, updates of products and changes of specifications on (through-hole),,,,0,,,9, (w/) TS US VS (w/) (through-hole) Min.,,0 (SMD) Min., Min., Max, Max, Max,,,,,, - -,9,,,0 Ø,,0, (w/),,9,,9 Ø,,0,, US,,,9,,,,,,,9,,9,,, Ø, Ø 0,9,, Ø 0,9, Min.,0, Max,,,0,,, TS - frosted white, Ø 0,9 (SMD), VS,,9 Colour,0 code TS US TS VS US VS (SMD) (w/) (SMD) (through-hole) (through-hole) *For an illuminated quiet.0n switch add Q,, to the end of the switch part number. Max, TS US VS (w/) Min.,,0 (SMD) (through-hole) Min., Min., Max, Max, Max,,,,,, - - Colour,0 code,,,0 Ø,,0,,,,9,,9, Ø 0,9 Min.,0, Max, Ø,,0,,,,0,, TS,,9,, Ø,,,0 US,, - Ø 0,9,9,,,0,0,,, VS,,,,,9,,,, Ø 0,9,9,, 00 blue 0 green, 0 grey 0 yellow 0 red,,9,,, 0,,,,, (SMD),,9,0,,0, Sealing,, TW UW, Sealing TW UW,9,, VW,0,,0,,, 0, 0, VW 0, 0,

18 ,,,,,,,9,,9,,,,,,,,9,,,,9,,9,,,,,,,,,,,,,9,,9,,,,,,9,,,,9 multimec Ellipse-shaped caps WAS G WAS/WDS/WPS WAS WAS,, Ellipse-shaped caps,, Convex or concave top surface. mm x. mm;.0 mm x. mm h =. mm Material: ABS/polycarbonate Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C Panel cut-out: WAS/WPS-.9x.9, WDS-.x.,,, WAS WAS All dimensions in mm WPS illu WPS illu SMD WAS TH w/ WPS TH WDS WDS WDS WDS WPS WPS illu illu WPS illu WAS,0,,,,,,,,0,,0,,,,,, R0 R0, R0 R0,, R0,,, Min, Max, Min, Min, Max, Max, Max Max Min, Min, Max Max,, Max Max Min, Min, Max, Max, Min, Max, Max WAS WDS WDS WDS Illuminated HOW TO ORDER WAS WAS WDS WDS WPS illu,0, WPS illu,0,0,,,,0,0,,, G, Min, Min, Max, Max,, 0 Min, Min, Q* Max Max,, *For an illuminated quiet.0n switch add Q to the end of the switch part number. 0 blue green yellow white red green/yellow red/green WAS red/yellow, Min, Max, WAS WPS,, R0 WDS Colour code WDS WDS,0, Min, Max, Max WDS frosted white WPS illu,0, WAS non-illuminated HOW TO ORDER G Min, Max,, WPS illu Min, Max, Colour code 0 0Q WAS WPS WDS WDS 00 blue 0 green 0 grey 0 yellow 0 red 0 ultra blue 0 dusty blue aqua blue metal light grey metal dark grey WDS,0, Ordering example:, GTH9WAS00 without illumination OR GSH9WDS with illumination OR *GSH90Q (illuminated quiet version) Min, Please see colour codes, updates of Max products, and changes of specifications on

19 ,0 9,,0 9,,0 9,,0 9,,,,,,,,,,,,,9,,,0,9 9,,,0,0,0,,0,,,,,,0,,0 multimec Rectangular cap with soft edges G XS Rectangular cap. mm x 9. mm h =. mm Material: ABS/polycarbonate Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C Panel cut-out: XS-9. x.9 9,,,9 9, All dimensions in mm Min, Max, 0 TH XS SMD w/ XS 9, 9,,, 9,,9 9,,9,,,,,9 R, Min, Max, Min, Max, R, Min, Max,,,,,,, Illuminated HOW TO ORDER R, R, R, R, Colour code G X S 0 Q* 0 blue green yellow white red green/yellow red/green red/yellow transparent frosted white non-illuminated HOW TO ORDER Colour code G X S SH9 surface moun 0 0Q 00 blue 0 green 0 grey 0 yellow 0 red 0 ultra blue 0 dusty blue aqua blue mint green tele grey melon noble red 0 metal dark blue metal light grey metal dark grey metal bordeaux Ordering example: GTH9XS with illumination OR GSH9XS0 non-illuminated OR *GTH90Q (illuminated quiet version) Please see colour codes, updates of products and changes of specifications on 9

20 foilmec Square cap for foil overlay E YS Square cap Designed for foil overlay mm x mm h =. mm Material: ABS/polycarbonate Temp. Range: -0/ C Panel cut-out: YS- x SMD All dimensions in mm,,90 TH YS, SMD YS,,, SMD,90 Recommended placement of s SMD TH, Ømm Min., Max, n., x, Min., Max,,0,0,,0,0,,0,0,,,, with placement,,,0,90,,,,0,0,0,0,0,,0,0,,90,0,,0,0,0 Ømm, with placement,0,0,90,,,,,90,,,,,90 Recommendation SMD: TH: mm - Ø max. - Height max. mm, R,,0 R, R, R, R,, HOW TO ORDER R,,,90,0 R,, R, R,,90, R,,,90 0 E,0,0,90 0 0Q,90,0,0 Y S 0 YS0 white cap with frosted white lens R, A: We recommend you to allocate enough space for travel of the foil and leave the area free from adhesive. travel = mm. H: The height recommendation does not include the foil. We recommend embossing the foil to follow the curve of the keycap. The best tactile feeling is obtained with a small pretravel. The dimension H is based on an embossed foil. With a flat foil the dimension H will have to be adjusted, and enough area between the cap and front panel needs to be addressed to ensure foil flexibility. h =, ±0, H=,0 0, A= 0 Ordering example: ESH9YS0 Please see colour codes, updates of products and changes of specifications on

21 multimec solution for navigating navimec G ZB/ZCS Round solution Designed for navigating a display or controlling a unit 90 R=. mm; Ø. mm (Ø. mm) h =. mm;. mm Material: ABS/polycarbonate Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C Panel cut-out: ZB-R, R,, 90 ZCS-Ø. navimec panel cut-out: Ø,0 -, Depending on application All dimensions in mm,00 TH ZB SMD w/ ZCS for Navimec solution,00,,, Min, Max Min,, Min, Min, Max Min, Max,, Max, Max, R=, R=, (actuated) R=, R=, R=, R=,, (actuated) R=, (actuated) R=, R=, tuated) (actuated),,,,,,, Illuminated HOW TO ORDER G () Ø 0,9 Ø 0,9 0 Q* *For an illuminated quiet.0n switch add Q to the end of the switch part number. Min, Max, R=, (actuated),,,, Min, Max, 90,, Ø, Ø, Ø, Ø,, Ø, 0 blue green yellow, white red R=, green/yellow red/green red/yellow R, R, R=, (actuated) R, R, R,,,,0,0,0,0,0 Min, Max,, 90 R=,,,,,,,,,,,,,,,,, Z B Frosted white with black soft touch paint and laser marking Ø, R, Z C S R,, SMD,00,0,,,,,00 Ø, R,,0 Legend code TH,00 We recommend using through-hole terminals for precise placing.,00,00 DLMA LMC LMC OK,,,,00 R=, (actuated) non-illuminated HOW TO ORDER Min, Max, G 90, () R=,, 0 0Q Ø 0,9, R=, (actuated) 90 Ø, R=, R, Z B Colour code 00 blue 0 green 0 grey 0 yellow 0 red 0 ultra blue 0 dusty blue aqua blue 0 metal dark blue metal light grey metal dark grey metal bordeaux ** White legends on black caps are standard, other options are available but considered custom products. See pages -.,0,,,, Z C S Ø 0,9 Legend code** Ordering example: x GTH9ZBDLMA x GTH9ZCSLMC (with illumination) OR x GSH90ZB09 x GSH90ZCS09 (without illumination) OR *GTH900Q (lluminated quiet version) Please see colour codes, updates of products and changes of specifications on Ø,,0,, DN p P SET P HOME P9 FUNC pad printed legends P MENU P OK P ENTER P RESET

22 multimec Module for navigating navimec module Module should be attached to the front plate with bolts (bolts not supplied by MEC) Round solution Ø. mm h =. mm;. mm Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C Recommended panel cut-out: Ø,0 -, Depending on application All dimensions in mm Navimec Module 0 - mm Ø, (x) PCB,, SW 0, SW SW SW SW SW SW SW SW, SW Ø, When the ZB is activated the diameter changes from, mm to,0 mm HOW TO ORDER navimec Module ordering options: SW navimec Module excl. keycaps navimec Module incl. keycaps SW SW SW navimec Module incl. keycaps with legends Illuminated navimec Module excl. keycaps Illuminated navimec Module incl. keycaps SW with legends Part no. for PCB and connector - 90 Part no. for switches and caps: navimec Module has many customisation options regarding actuation force, cap and colours and legends. Because of that ordering is based on part numbers of separate parts instead of one specific part number. MEC has the switches mounted on the module before delivery, which is included in the module price. See previous page for information on switch and cap options as well as the examples below. J J J J 0 SEE THE CIRCUIT DIAGRAM AND CONNECTOR Ø, INFO (x) ON PAGE, Ordering example: 90 x GTH90 x GTH90 (without caps) OR 90 x GTH9ZB x GTH9ZCS (with caps) OR 90 x GTH90ZBDLMA x GTH90 ZCSLMC (painted caps with laser engraved legends) Please see colour codes, updates of products and changes of specifications on J 0,

23 ,0,0 multimec Panel sealed solution for a control unit controlmec E/G ZW Round cap Panel sealed solution, designed to control a unit or navigate a display Ø9. mm h =. mm Material: ABS/polycarbonate Temp. Range: ZW Solid cap: -0/ C Transparent cap: -0/ C Panel cut-out: ZW-Ø0. All dimensions in mm ZW TH ZW,0 0,,9 0, example ZW,0 0,,,9 0, Hole in front plate ø - 0, Ø 0,9 Ø ZZ Seal,, ZY Seal support, Ø, pcs. GTH9 (s) pcs. ETH9, PCB,0 Ø 0,9 We recommend using through-hole terminals for precise placing. Illuminated HOW TO ORDER (optional) Colour code Legend code G (),0 0 blue green yellow white red green/yellow red/green red/yellow ZW Seal 00 blue 0 green 0 grey 0 yellow 0 red frosted white Seal support N P P OK Laser marked legends: LMA LMC LMC OK E Panel seal Z Z () transparent ZY Ordering example: GTH9ZW09x ETH9ZZZY without illumination OR GTH9ZWLMALMCx ETH9ZZZY with illumination Please see colour codes, updates of products and changes of specifications on

24 ,0,0,9,0,9,0,9,0 multimec for a control unit controlmec E/G Z,0 0, Round Z cap Designed to control a unit or navigate in a display Ø9. mm h =.0 mm Material: ABS/polycarbonate Temp. Range: Solid cap: -0/ C Transparent cap: -0/ C Panel cut-out: Z-Ø0.,9 0,,0 0, ZW,9 0,,9 0, TH Z,0 0,.0 _ 0.0 Z,9 0, Z. _ 0. Hole in Front Plate ø pcs. ETH9 pcs. GTH9 (s),9 0,. Ø Ø, All dimensions in mm 9.. Ø Ø..,0 0, ZW,,,9 0,, Ø 0,9 Ø 0,9, Ø Ø 0 Ø Ø.,.,,,0. Illuminated HOW TO ORDER.,0,0 We recommend using through-hole terminals for precise placing.,0 (optional) Colour code Legend code G () 0 blue green yellow white red green/yellow red/green red/yellow Z 00 blue 0 green 0 grey 0 yellow 0 red frosted white N P P OK Laser marked legends: LMA LMC LMC OK E () Ordering example: GTH9Z0 x ETH9 without illumination OR GTH9ZLMALMC x ETH9 with illumination Please see colour codes, updates of products and changes of specifications on