SWAN POINT YACHT & COUNTRY CLUB

Transcription

1 SWAN POINT YACHT & COUNTRY CLUB PROJECT INFORMATION: SCOPE OF WORK: INTERIOR ALTERATIONS ABBREVIATIONS: VICINITY MAP 33 East Charles Street PO Box PROPERTY MANAGER: DOTTIE HARPER BROOKFIELD RESIDENTIAL 320 JERMANTOWN ROAD, SUITE 50 FAIRFAX, VA PROJECT ADDRESS: SWAN POINT YACHT AND COUNTRY CLUB 550 SWAN POINT BOULEVARD ARCHITECT: L D HOLMES ARCHTIECTS, P.C. PO BOX EAST CHARLES STREET LA PLATA, MD MECHANICAL, PLUMBING AND ELECTRICAL ENGINEER : LEWIS ENGINEERING ASSOCIATES 2884 RIVERWATCH DRIVE MECHANICSVILLE, MD LEWISENG.NET GOVERNING CODES: International Building Code 202 [IEBC 202] Maryland State Fire Prevention Code NFPA LIFE SAFETY CODE [NFPA 202] CODE INFORMATION: EXISTING BUILDING ALTERATION LEVEL 2 TOTAL AREA = 6,800 SF AREA OF WORK = 5,585 SF USE GROUP - MIXED N-SEPARATED [ASSEMBLY A-2, BUSINESS, MERCANTILE] BUILDING INFORMATION CONSTRUCTION - 5B HEIGHT AND AREA - HEIGHT - STORY AREA - FIRST FLOOR - 6,800 SF MAXIMUM ALLOWABLE FROM TABLE 503 WITH SPRINKLER INCREASE = A a =[A t + [A t x I s ]] A a = [ 6,000 SF + [6,000 x 3]] = 24,000 SF MAX OCCUPANCY LOAD = 548 PERSONS SEE OCCUPANT LOAD TABLE FOR CALCULATIONS EGRESS CAPACITY Egress Components (other than stairs) = 0.2 X 548=09.6" MAIN ENTRANCE = 54.8" MIN. Exits Provided = 9 MAXIMUM TRAVEL DISTANCE: 250 ft Sprinkled MAXIMUM COMMON PATH OF TRAVEL: 75 ft DEAD END CORRIDORS: 50 ft FIRE RESISTANCE RATINGS Exterior Bearing Walls... 0 Exterior Non Bearing Walls... 0 Interior Bearing Walls and Partitions... 0 Interior Non-Bearing Walls and Partitions... 0 Floor Construction and Supporting Members.. 0 Roof Construction and Supporting Members.. 0 Corridors...0 INTERIOR FINISH REQUIREMENTS FLOORS: NE WALLS AND CEILINGS: CLASS A OR B FULLY SPRINKLED WITH A SUPERVISED FIRE ALARM SYSTEM WORK SHALL INCLUDE RECONFIGURATION OF THE BAR, NEW BAR EQUIPMENT, CABINETRY AND PLUMBING. MODIFICATIONS SHALL BE MADE TO THE COFFERED CEILING IN THE BAR AND REMOVAL OF THE EXISTING DOMED CEILING STRUCTURE IN THE LOBBY. MODIFICATIONS WILL BE MADE TO EXISTING LIGHTING. IN ADDITION REMOVAL AND REPLACEMENT OF FINISHES SHALL INCLUDE ACOUSTICAL CEILINGS, FLOOR COVERINGS AND TRIM. SEE KEY PLAN FOR EXTENT OF WORK. GENERAL : COPYRIGHT 20 - LD HOLMES ARCHITECTS, PC All rights reserved. The copying or reuse of these documents, or portions thereof, for other than the original project or the purpose originally intended, without the written consent of LD Holmes Architects, PC is expressly prohibited.. No Changes to the plans are permitted. The architect shall not be responsible for any departure from these drawings at any time during construction. 2. All layout Dimensions as indicated shall be adjusted where required. Rough openings required by specific building components shall take precedence for proper fit of finished component. 3. Never scale drawings: Contractor shall refer to written dimensions only. All dimensions and conditions shall be verified in the field and any discrepancies reported to the architects prior to construction. In all cases the details and drawings shall be checked with existing conditions from work in place, and variations, if any, be referred to the architect for adjustment. The contractor will be held responsible for the fit of work in place. 4. All work shall be done in accordance with local codes and as indicated on drawings. DEMOLITION & CONSTRUCTION : Coordinate all work and schedule with the owner or designated agent. Protect all areas not included in the work. Any damage that occurs as a result of the work shall be repaired to a like new condition at G.C. expense. No alterations to the existing structural members are allowed unless specifically noted and approved by the owner or owner's agent in writing. All conditions and dimensions shown are for reference only and must be field verified at the site. Upon completion of demolition all conditions and dimensions are to be checked for variances. Report any discrepancies immediately to the project manager. Any unnoted existing conditions which may conflict with the proposed new work and may require modification, relocation and or removal shall be identified and reported to the architect at once. Refer to Architectural drawings for scope of new work and to confirm termination and/or removal of existing fixtures, devices and services. Any modification to existing Fire Alarm system must be approved by local Fire Marshall. Entire System shall be tested upon completion of work. Maintain and/or repair all fire rated assemblies and separations (wall, floor, ceiling, or between adjacent spaces, etc.) to maintain any fire rating as required by code. Provide and / or maintain all fire stopping as required by code. Repair any damage that occurs during demolition to any assembly scheduled to remain. KEY PLAN: ADA AFF AHJ A.S.O. COMAR DM EX EXIST NFPA WD American Disability Act Above Finished Floor Authority Having Jurisdiction As Selected by Owner Annotated Code of Maryland DEMO EXISTING EXISTING National Fire Protection Association WOOD LIST OF DRAWINGS: ARCHITECTURAL C. COVER SHEET D. DEMOLITION FLOOR PLAN D.2 DEMOLITION REFLECTED CEILING PLAN A. FIRST FLOOR PLAN A.2 REFLECTED CEILNG PLAN A2. BAR MILLWORK DETAILS A2.2 BAR MILLWORK DETAILS A3. SCHEDULES AND MECHANICAL, PLUMBING AND ELECTRICAL MEP SWAN POINT YACHT & COUNTRY CLUB OCCUPANT LOAD BUILDING CODE IBC 202 FIRE CODE NFPA 202 RM # ROOM NAME AREA SF FACTOR OCCUPANTS FACTOR OCCUPANTS 550 SWAN POINT BOULEVARD DESIGN LOADS: FLOOR LOAD PSF GROUND SW LOAD PSF SOIL BEARING CAPACITY PSF BASIC WIND SPEED MPH FROST DEPTH... 24" SEISMIC DESIGN CATEGORY... A BUILDING AREA = 6,800 SF AREA OF WORK = 5,585 SF EXP. DATE //203 PROJECT NUMBER: DATE:2/24/204 COVER SHEET C

2 D0 007 D D East Charles Street PO Box SWAN POINT BOULEVARD EXP. DATE // ' 4' 8' SCALE: /4" = '-0" PROJECT NUMBER: DATE:2/24/204 FIRST FLOOR DEMO DEMOLITION FLOOR PLAN D.

3 550 SWAN POINT BOULEVARD 33 East Charles Street PO Box DEMOLITION REFLECTED CEILING PLAN 0 2' 4' 8' SCALE: /4" = '-0" EXP. DATE //203 PROJECT NUMBER: DATE:2/24/204 DEMOLITION REFLECTED CEILING PLAN D.2

4 25 33 East Charles Street PO Box SWAN POINT BOULEVARD ' 4' 8' SCALE: /4" = '-0" EXP. DATE //203 FIRST FLOOR PLAN PROJECT NUMBER: DATE:2/24/204 CONSTRUCTION FLOOR PLAN A.

5 550 SWAN POINT BOULEVARD 33 East Charles Street PO Box REFLECTED CEILING PLAN EXP. DATE //205 PROJECT NUMBER: DATE:2/24/204 CONSTRUCTION REFLECTED CEILING PLAN A.2

6 FIREPLACE ELEVATION 6 /2" = '-0" 33 East Charles Street PO Box BACK BAR ELEVATION /2" = '-0" 550 SWAN POINT BOULEVARD BAR ELEVATION 2 /2"='-0" BAR ELEVATION 3 /2"='-0" BAR ELEVATION 4 /2"='-0" BAR ELEVATION EQUIPMENT PLAN 6 /2"='-0" EQUIPMENT SCHEDULE POWER. DESCRIPTION MANUFACTURER MODEL AMPS VOLTS PHASE ACCESSORIES COMMENTS EXP. DATE //205 PROJECT NUMBER: DATE:2/24/204 BAR MILLWORK DETAILS MILLWORK PLAN 5 /2"='-0" A2.

7 33 East Charles Street PO Box /2" = '-0" 6 /2" = '-0" 7 /2" = '-0" 550 SWAN POINT BOULEVARD EXP. DATE //205 PROJECT NUMBER: DATE:2/24/204 /2" = '-0" 2 /2" = '-0" 3 /2" = '-0" 4 /2" = '-0" BAR MILLWORK AND DETAILS A2.2

8 DOOR AND FRAME SCHEDULE DOOR FRAME SIZE MARK ROOM NAME WD HGT DOOR ELEVATIONS THK MATL EL GLAZING MFR. MATL MODEL FIRE RATING LABEL HARDWARE SET A B D C E F HARDWARE SETS 5 33 East Charles Street PO Box COFFER DETAIL 3"='-0" ROOM FINISH SCHEDULE WALLS TRIM FINISH FINISH 2 FIELD TRIM CROWN BASE CEILING CASING CHAIR RAIL MATL GRID TRAY FINISHES LIGHTING SCHEDULE ACOUSTICAL CEILING TILE (ACT) MANUFACTURER PRODUCT NAME PRODUCT NUMBER SIZE GRID SYSTEM LAMP. DESCRIPTION LOCATION MFR. MODEL SIZE FINISH BASE 4 # LIGHT COVE DETAIL 3"='-0" CARPET (CPT) MANUFACTURER PATTERN PRODUCT FIBER CLASS VINYL TILE (VT) MANUFACTURER CLASS 550 SWAN POINT BOULEVARD FLOOR ROOM NAME ROOM NUMBE R TILE (T) MFR PRODUCT SIZE GROUT MFR GROUT CLR INSTALLATION CROWN DETAIL 3 3"='-0" PLASTIC LAMINATE (PLAM) MFR MISCELLANEOUS ITEM COLLECTION PRODUCT INSTALLATION MISCELLANEOUS ELECTRICAL. DESCRIPTION MFR. MODEL DESCRIPTION FINISH PAINT (PT) MANUFACTURER PRODUCT SHEEN REMARKS 2 BUILT UP CROWN DETAIL 3"='-0" EXP. DATE //205 PROJECT NUMBER: DATE:2/24/204 SCHEDULES AND CHAIR RAIL DETAIL 3"='-0" A3.