AD425S Automatic door operator

Size: px

Start display at page:

Download "AD425S Automatic door operator"

Dora Booker
9 years ago
Views:

1 EC8666 Statement Automatic Door Operator is a reliable and quiet door opening and closing device. This product is ideal for enabling access to areas for people with disabilities or simply for convenience (for example in hospitals, nursing homes and airports etc). It is compact and can be used in combination with other access control system to create a barrier-free environment. Safety Device Do not push/pull the door with excessive force during p r o p e r o p e r a t i o n. E x c e s s i v e f o r c e w i l l l e a d t o auto shut off by control board and recovery after 0 seconds. The zinc alloy housing with heat treatment for some inner parts enhances the construction strength and durability Specifications Operating voltage Current draw r 0~0 VAC A max., 0.6A average (Motor) 5 Torque Opening/Closing time 5Nm.5~9.5 seconds (90) 6 7 Maintain-Open time Battery Specification,5,0,0 seconds V.AH 9 8 Battery charge V=0.5A (Normal); 0.A (Peak) Temperature Moisture resistant grade Net Weight -0C~+55C (Battery 5C~0C) IPD 8.5 kg Dimensions Wing dimensions Motor specification Operator: 56(L) x 00(W) x 96(D) Arm: 00 (unit: mm) Door wing width : 75~0 cm Door wing weight : 0~00 kg Door wing high:max.80cm Maximum current : A Output : 65W Voltage: 8~VDC Frequency: 00 RPM. Cover. Motor. Reducer. Square Couplings 5. Control Board 6. Battery 7. Power Switch 8. Operating Arm 9. Sliding Rail 0. Stopper Ball. Baseplate. Transformer. Encoder. Photocell

It is compact and can be used in combination with other access control system to create a barrier-free environment.

2 Features 00~5/0~0 V Selectable dual voltage T h e A D 5 S o p e r a t e s o n e i t h e r 00~5 or 0~0 VAC mains power such that it can be used almost anywhere in the world. Applicable for all doors can be mounted to open outwards or inwards and fits either left or right swinging doors. All in one The has interfaces for up to six optional devices such as electromagnet locks, press to open buttons, microwave sensors, card readers and other accessories. Safety device incorporates a safety device. When an obstruction is detected the door will be returned to its previous open or closed position to prevent accidents. Maintain-Open time The door can be adjusted to open for a maximum of 0 seconds. This is s u i t a b l e f o r b o t h d i s a b l e d a n d wheelchair users. High accuracy A built-in Photocell and encoder are used to control the action of the operating arm. Desired opening angle and appropriate braking distances can be accurately managed. Quiet and Reliable is quiet and reliable when operating. Wide Range It is suitable for doors with width between 75 ~ 0 cm and weight between 50 ~ 00 kg. See Figure Wing dimensions Selectable operating speeds Four selectable operating speeds settings and two levels of torque output can be chosen based on the width and weight of the door. Push & Go option includes a switch to select between auto and manual mode. In manual mode, applying force to the door will activate the opening. Remote controls Can be used in conjunction with wireless remote controls. Wing dimensions A B Backup battery In case of power failure, a backup battery can maintain normal opening and closing operations up to 50 times Door wing width(cm) Door wing weight(kg) Service Class A: average of up to 600 cycles per day Service Class B: average of up to 00 cycles per day

All in one The has interfaces for up to six optional devices such as electromagnet locks, press to open buttons, microwave sensors, card readers and other accessories.

3 Dimension 00 Unit: mm PUS HOLDON I I 0 0 GO OPENOFF Install on an out-swing door, make sure that the distance between the header and leaf is not more than 60mm, and the space between the header and Sliding Rail mounting hole must be 6mm, on an in-swing door, make sure that the distance between Square Couplings and hinge is not more than 7mm, the space between header and the bottom of must be mm, and the space between header and Sliding Rail mounting hole must be 9mm. In-swing 6mm Header (Max.)60mm Stopper Ball 0 mm Header 9mm 7mm Depending on the door leaf opening

distance between Square Couplings and hinge is not more than 7mm, the space between header and the bottom of must be mm, and the space between

4 Destination Application To mount the depends on the direction way of the doors, outswing, inswing, right- open and left-hand doors by adjusting the F/R switch and the direction of the Operating Arm. For the safety reason, must be installed indoor. door Opening angle: 90 degree Destination Brake for wall blanking function. VM action time is the opening and closing time. TC Maintain time of -0 seconds. Open Door Destination(TC Maintain time) Right-hand Left-hand VM Action time Brake door Right-hand Left-hand Close Door VM Action time Brake Operating Arm turns clockwise or counter-clockwise.

door Opening angle: 90 degree Destination Brake for wall blanking function. VM action time is the opening and closing time.

5 Application V.Ah Microwave sensor switch Electric Locking Device Fail safe Motor Relay ( Motor) Battery AC5V in (Motor) ( Charge) Fuse ( DC in) ( Relay) VM TC Relay (Lock) 8 9 REDA REDA N.C. N.O. 8 9 DC Power Fail secure Access Control System N. O. N. O. In-swing Wireless Push Button (Outdoor) Warranty The product is warranted against defects in material and workmanship while used in normal service for a period of 5 years from the date of sale to the original client. The policy is one of continual development and improvement; therefore reserves the right to change specifications without notice. Max..5 meter 0 ~ 7 meter

(Lock) 8 9 REDA REDA N.C. N.O. 8 9 DC Power Fail secure Access Control System N. O.

ABLOY DOOR AUTOMATICS Easy access for all types of swing doors

ABLOY DOOR AUTOMATICS Easy access for all types of swing doors Automatic door operators bring additional convenience in situations where the doors opening manually would be inconvenient or laborious. Recommended