H.264 Network Embedded DVR

Size: px

Start display at page:

Download "H.264 Network Embedded DVR"

Valerie Randall
7 years ago
Views:

1 1 Manual for Remote View -Iphone H.264 Network Embedded DVR INSTRUCTION MANUAL FOR REMOTE VIEW&CONTROL Iphone edition

2 2 Manual for Remote View -Iphone Content Zone A: Setting on DVR interface Step 1: Plug network line into DVR s LAN P3 Step 2~4: Coming into mobile setting interface..p3~4 Step 4-1: Setting for MOBILE NETWORK.P4 Step 4-2: Setting for MOBILE PORT....P5 Zone B: Setting on your router Step 5~5-4: How to Set on your router if DVR w/o UPNP function P7 Step 6~6-4: How to Set on your router if DVR w/ UPNP function P7 Zone C: Setting on iphone end. Step 7: Precoditions you must know for iphone system... P9 Step 8: Meye Installation...P9 Step 8-1: Coming into App Store interface... P9 Step 8-2: Search and download Meye sun.... P9 Step 8-3: Install Meye...P9 Step 8-4: Come into main menu P9 Step 8-5: Settings for your phone P10 Step 8-6: Visit DVR from cell phone end...p11 Attention here: 1>This instruction manual is only applicable for Iphone with operation system above OXS V 2.0 2>Before you set remote view for mobile phone, firstly you must finish corresponding settings to guarantee your DVR could be visited from WAN(you could found these settings from MD-Instruction Manual for Remote Control-Router UPNP Supported.pdf Or : MD-Instruction Manual for Remote control-router Without UPNP.pdf

...P5 Zone B: Setting on your router Step 5~5-4: How to Set on your router if DVR w/o UPNP function P7 Step 6~6-4: How to Set on your router if DVR w/ UPNP function...... P7 Zone C: Setting on iphone end.

3 3 Manual for Remote View -Iphone Zone A: Setting on DVR interface Step 1: Plug network cable line into LAN, assure the light is on, indicating network is normal. Figure 1 Step 2: Coming into DVR s main menu, select ADVANCE Figure 2 Step 3: Then select MOBILE Figure 3

4 4 Manual for Remote View -Iphone Step 4: Coming into setting interface for Mobile, you ll see Figure 4 Step 4-1: MOBILE NETWORK : Here re three options, please select corresponding bandwidth your mobile phone used, here i.e, we set it as 3G. Attention here: Please select correct bandwidth according to local mobile carriers as well as net standard your cell phone supports. 2.5G: For GPRS and CDMA users 2.75G: For EDGE users 3G: For 3G users Figure 4-1

5 5 Manual for Remote View -Iphone Step 4-2: MOBILE PORT : please input any port number between , provided that it s a 5-digit number, and not used by any other device in your wireless environment, i. e, here we set it as Attention here: MOBILE PORT you set must not be Internet special business port Figure 4-2 Zone B: Settings on your router. Here you need check whether your DVR has UPNP function. If yes, please follow steps from Step 5 to Step 5-4) If not, please follow Steps from Step 6-1 to Step 6-4 ) Step 5: Settings details on your router in condition that your DVR has not UPNP function. Step 5-1: Visit your router s IP address (It s easily found from your router s surface), now take writer s router address as example(the operation steps are different according to different routers, but actually they re in the same way) Figure 5-1

Here you need check whether your DVR has UPNP function.

6 6 Manual for Remote View -Iphone Step 5-2: Click NAT/QOS, and select Port Forwarding, then click ADD Figure 5-2 Step 5-3: Filling necessary clues to finish Port Forwarding: Application : fill in your dvr s name, completely up to your idea. Writer sets it as dvr Port from : fill in MEDIA PORT, previously we keep it as 00100, so here keep accordance. Protocol : select Both IP Address : input your DVR s IP, you can see writer fill as Port to : same as Port from Enable : click it to enable. Figure 5-3

Writer sets it as dvr Port from : fill in MEDIA PORT, previously we keep it as 00100, so here keep accordance.

7 7 Manual for Remote View -Iphone Step 5-4: Then, click Apply Settings, in this way, you finish Mobile phone port forwarding. Figure 5-4 Step 6: Settings on router in condition that your DVR has UPNP function. Attention here: >Your router must be with UPNP function >You must select TYPE as DHCP on DVR s NETWORK interface. H Step 6-1: Input your router s IP in browser s address bar, and land your router s managing interface, then find UPNP Figure 6-1

Attention here: >Your router must be with UPNP function >You must select TYPE as DHCP on DVR s NETWORK interface.

8 8 Manual for Remote View -Iphone Step 6-2: Select UPNP Service as Enable Figure 6-2 Step 6-3: Check UPNP s status Equally, land your router s managing interface, inspect setting list for UPNP, check whether mobile port are automatically added here or not, of course, here, DVR s web port, media port should be added already. Now we can see they re all here. Figure 6-3

list for UPNP, check whether mobile port are automatically added here or not, of course,

9 9 Manual for Remote View -Iphone ZONE C: Settings on your mobile phone end. Step 7: you must know these precondition that system requires: Support Device Space Required Software required iphone or ipod 2.0 or greater is required >800 KB Free space itunes(optional) Step 8: Install Attention here: before installing mobile phone remote view software, you must finish internet access according to your phone user manual and consult local mobile network operators, which guarantees your mobile phone can visit internet and receive Stream Media. Step 8-1: Open your iphone and click App Store Step 8-2: Under search bar,typing Meye sun and click search button. Download the Mobile Viewing Application for free, the file name is Meye Step 8-3: Install Click the Meye icon, The application begins to install on your iphone. Memo: If you wanna uninstall, then Under your iphone main menu,press and hold the Meye icon for a few seconds,you will see the Delete Button to uninstall the Meye. Step 8-4: Main menu, After installation, you ll find menu as below, Figure 8-4

0 or greater is required >800 KB Free space itunes(optional) Step 8: Install Attention here: before installing mobile phone remote view software, you must finish internet access according to your

10 10 Manual for Remote View -Iphone You could check what each icon stands for from following table. Icon Function Description Play Connecting to your cameras Full Screen Switch full screen or window Snap Shot Capture the image from your camera Settings Next group Step 8-5: Click Settings Setup your ip_address and port and your account info Next channel group (1~4,5~8,9~12,13~16), you ll see setting interface as below: Figure 8-5

Shot Capture the image from your camera Settings Next group Step 8-5: Click Settings Setup your ip_address

11 11 Manual for Remote View -Iphone Address : you can fill WAN IP address of router, which can be found easily from your router s managing interface, but here we wanna say: since WAN IP always change out of your care, it s highly recommended to visit DVR through DDNS host name, you can obtain details from Step4-9~ in MD-Instruction Manual for Remote control-router Without UPNP.pdf Port : Fill into Mobile Port you set on DVR interface as Figure 4-2 on page 5. User ID : Enter admin Password : Still, Enter admin Step 8-6: Click Back and click play, the mobile viewer will connect automatically, you can use the channel number button to switch between cameras(you can only view one channel at a time). If you are having trouble connecting, please check the wireless network configuration on your phone.

pdf Port : Fill into Mobile Port you set on DVR interface as Figure 4-2 on page 5.

Network Setup Guide. 1 Glossary. 2 Operation. 1.1 Static IP. 1.2 Point-to-Point Protocol over Ethernet (PPPoE)

Network Setup Guide. 1 Glossary. 2 Operation. 1.1 Static IP. 1.2 Point-to-Point Protocol over Ethernet (PPPoE) Network Setup Guide 1 Glossary 1.1 Static IP Computers are communicated and recognized by their own unique IP addresses over the Internet. Static IP provided by your ISP (Internet Service Provider) means