Product End-of-Life Disassembly Instructions Product Category: Consumer Display

Transcription

1 Product End-of-Life Disassembly Instructions Product Category: Consumer Display Marketing Name / Model [List multiple models if applicable.] HP Pavilion 27xi 27-Inch IPS LED Backlit Monitor Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, 1. Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 1 sq cm With a surface greater than 1 sq cm 2 All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps Cathode Ray Tubes (CRT) Capacitors / condensers (Containing PCB/PCT) Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords 3 Gas Discharge Lamps Plastics containing Brominated Flame Retardants Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers 1 EL-MF877- Page 1 Template Revision B PSG instructions for this template are available at EL-MF877-1

2 Components, parts and materials containing radioactive substances N/A 2. Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Screwdriver Tool Size (if applicable) PH2 Hex nut screwdriver M5 3. Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. Quick release Base stand 2. Strip the screws from rear cover so that the rear metal cover can be removed, after be turn back; 3. Strip the five screws from panel holder ; 4. Push up and disassemble the cover from the panel; 5. To remove the shielding(contain the other material ); 6. Strip the screws; 7. Release all materials and put some by ESD; 3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF877- Page 2 Template Revision B PSG instructions for this template are available at EL-MF877-1

3 13-July-212 Step 1 Quick release Base stand (1).Pull out base and stand (2).Disassy base and stand Page 3

4 13-July-212 Step 2: Strip the screws from rear cover so that the rear metal cover can be removed, after be turn back; Step 3: Strip the five screws from panel holder ; such as bellow; Step 4:Push up and disassemble the cover from the panel; Page 4

5 13-July-212 step 5: To remove the shielding(contain the other material ); (4.1) Remove the acetate tapes covering the LVDS/ LED FFCs; (4.2) Pull out the LVDS/ LED FFCs to separate the base assembly from the unit; l l Page 5

6 13-July-212 Step 6: Strip the screws *4pcs Strip the other screws *4pcs from the M/B; Page 6

7 13-July-212 Step 7: Release all materials and put some by ESD; Can follow the picture as bellow; The overall look after when finished Page 7