Product End-of-Life Disassembly Instructions

Transcription

1 Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP Pro x2 612 G1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) With a surface greater than 10 sq cm 1 Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height 0 External electrical cables and cords 0 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. 0 0 EL-MF Page 1 Template Revision B PSG instructions for this template are available at EL-MF877-01

2 Components and waste containing asbestos 0 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Screwdriver #1 Description #2 Description #3 Electric cross screwdriver TORX T8 (2.31mm) D73 1 * 3.0 * 20 * 40 Description #4 Description #5 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first 3. Use correct screwdriver and torque value before unlock the screw Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF Page 2 Template Revision B PSG instructions for this template are available at EL-MF877-01

3 MANUFACTURING PROCESS INSTRUCTIONS MECHANICAL ASSEMBLY MODEL : Kitkat Sub-assembly name: Document No.: FA DIS ASS Y Kitkat FA LCM (Slate) DIS ASS'Y SOP Written by: Stanley Chen Revision: 0.1 Date: 2014/07/22 Page: 1 A. Current station version list Station Ver. Station Ver. Station Ver. Station Ver B. Version Modify list Revision Date Station Content Ver. Design /07/22 ALL FIRST VERSION 0.1 Stanley Chen Alicia Chien Tabulator:

4 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 1(1/1) Name : Loosen Screws Ver. : 0.1 Date : 2014/07/22 1. Put the slate on support fixture. () 2. Loosen screw (6052A ) * 4. () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

5 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 2(1/1) Name : Disassemble A, B Case Ver. : 0.1 Date : 2014/07/22 1. Disassemble A, B case. ( / ) Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

6 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 3(1/1) Name : Disassemble A, B Case Ver. : 0.1 Date : 2014/07/22 1. Disconnect volume/b FFC, and rip release paper on A case. () 2. Disconnect finger print /B FFC (Fig.3 / Fig.4), and disconnect BATT CNTR. (Fig.5) Fig.3 Fig.4 Fig.5 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

7 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 4(1/1) Name : Disassemble Finger Print/B Ver. : 0.1 Date : 2014/07/22 1. Rip the AL foil. () 2. Loosen screw (6052B ) * 1, remove the small bracket (6053B ), then disassemble the FP/B. (Fig.3) AL Foil Fig.3

8 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 5(1/1) Name : Disassemble Volume/B Ver. : 0.1 Date : 2014/07/22 1. Loosen volume/b screw (6052B ) * 2. () 2. Remove the bracket on volume/b (1310A ). () 3. Rip AL foil. (Fig.3) AL Foil Fig.3 鋁 箔 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver #0 1

9 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 6(1/1) Name : Disassemble Buttons Ver. : 0.1 Date : 2014/07/22 1. Disassemble power button (6051B ), volume button (6051B ), rotate button (6051B ). () Power Volume Rubber Rotate Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

10 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 7(1/1) Name : Disassemble WWAN Antenna Cable Ver. : 0.1 Date : 2014/07/22 Only for WWAN module 1. Rip all acid tapes. () 2. Disassemble WWAN antenna cable. () Acid Tape Acid Tape Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

11 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 8(1/1) Name : Disassemble WLAN Antenna Cable Ver. : 0.1 Date : 2014/07/22 1. Disassemble WLAN antenna cable. () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

12 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 9(1/1) Name : Disassemble WLAN Antenna Cable Ver. : 0.1 Date : 2014/07/22 1. Rip the acid tapes. 2. Disassemble WLAN /WWAN antenna cables. (/) Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

13 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 10(1/2) Name : Disassemble WWAN Card Ver. : 0.1 Date : 2014/07/22 1. Loosen WWAN card screw (6052B ) * 1. () 2. Disassemble the WWAN card.

14 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 10(2/2) Name : Disassemble WLAN Card Ver. : 0.1 Date : 2014/07/22 1. Loosen WLAN card screw (6052B ) * 1. () 2. Disassemble WLAN card. 1

15 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 11(1/2) Name : Disassemble SSD Module Ver. : 0.1 Date : 2014/07/22 1. Loosen SSD module screw (6052B ) * Disassemble SSD module.

16 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 11(2/2) Name : Disassemble FPC Ver. : 0.1 Date : 2014/07/22 1. Disconnect touch/b FPC, digitizer/b FFC from M/B CNTR. ( / ) Touch/B FPC Digitizer/B FFC Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

17 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 12(1/1) Name : Disassemble Frame Bracket * 2 Ver. : 0.1 Date : 2014/07/22 1. Loosen screw (6052B ) * 4. ( / ) 2. Disassemble frame bracket (6053B ) *2. Electric cross screwdriver (#0) 1

18 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 13(1/1) Name : Disassemble Thermal Module Ver. : 0.1 Date : 2014/07/22 1. Disassemble docking/b FPC. () 1 2. Loosen screw (6052B ) * 1, set screw * 2, then remove the fan (6033B ). () 3. Disconnect fan cable. (Fig.3) 4. Disassemble RTC battery cable. () Docking/B CNTR Fig.3

19 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : Name : Disassemble Smart Card/B Ver. : 0.1 Date : 2014/07/22 14(1/1) 1. Loosen smart card/b (1310A ) screw (6052B ) * 2. () 2. Disconnect smart card/b FFC from M/B CNTR. () 3. Disconnect ALS/B FFC. () 4. Disconnect camera FPC. (Fig.3) 1 2 Smart card/b FFC Fig.3

20 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 15(1/1) Name : Disassemble Cable & FFC Ver. : 0.1 Date : 2014/07/22 1. Disassemble DC-in cable (6017B ) ( / 2) 2. Disassemble speaker cable * 2. (Fig.3 / Fig.4) 3. Disassemble LVDS cable. (Fig.5) DC-in cable Speaker Cable Speaker Cable Fig.5 Fig.3 Fig.4 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

21 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 16(1/1) Name : Disassemble FFC and Brackets Ver. : 0.1 Date : 2014/07/22 1. Disconnect home button/b FFC from MB CNTR.(Fig.3) 2. Loosen screw (6052B ) * 4. () 3. Disassemble Dock CNTR bracket (6053B ). () 4. Disassemble USB CNTR bracket (6053B ). () USB CNTR Bracket Dock CNTR Bracket Fig.3

22 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 17(1/1) Name : Disassemble Battery Ver. : 0.1 Date : 2014/07/22 1. Loosen battery screw * 6 (6052A ). 2. Disassemble the battery

23 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : Name : Disassemble Dock/B Ver. : 0.1 Date : 2014/07/22 1. Disconnect the FPC. 18(1/1) 2. Loosen dock/b screw * 4 (6052B ), then take out the dock/b

24 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 19(1/1) Name : Disassemble Home Button/B and DC-in Ver. : 0.1 Date : 2014/07/22 1. Rip the AL foil on frame. (Fig.4) 2. Loosen screw (6052B ) * 2. (Fig.4) 3. Disassemble the bracket (6053B ) on home button/b. (Fig.4) 4. Disassemble the home button/b (1310A ). (Fig.3) 5. Loosen screw (6052B ) * 1, then disassemble DC-in module (6017B ). () DC-in Home button/b Fig.3 Fig.4 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver (#0) 1

25 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 20(1/1) Name : Disassemble M/B Ver. : 0.1 Date : 2014/07/22 1. Loosen speaker screw (6052A ) * 1, () 2. Loosen screw (6052B ) * 3 () 3. Disassemble the M/B

26 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 21(1/1) Name : Disassemble Thermal Module Ver. : 0.1 Date : 2014/07/22 1. Put the M/B on fixture. () 2. Loosen thermal module screw * 4. () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

27 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 22(1/2) Name : Disassemble Speaker - R Ver. : 0.1 Date : 2014/07/22 1. Loosen screw (6052B ) * 1, then disassemble the right speaker. () 2. Disassemble WWAN antenna cable. (Fig.3) Fig.3 Fig.3 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver (#0) 1

28 Document No. Kitkat FA LCM (Slate) DIS ASS Y SOP Station : 22(2/2) Name : Disassemble Speaker - L Ver. : 0.1 Date : 2014/07/22 1. Loosen screw (6052B ) * 2, then disassemble the left speaker. () 2 1 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver (#0) 1

29 MANUFACTURING PROCESS INSTRUCTIONS MECHANICAL ASSEMBLY MODEL : Kitkat Sub-assembly name: Document No.: FA DIS ASS Y Kitkat FA (Base) DIS ASS'Y SOP Written by: Stanley Chen Revision: 0.1 Date: 2014/07/24 Page: 1 A. Current station version list Station Ver. Station Ver. Station Ver. Station Ver B. Version Modify list Revision Date Station Content Ver. Design /07/24 ALL FIRST VERSION 0.1 Stanley Chen Alicia Chien Tabulator:

30 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 1(1/1) Name : Disassemble Cover Ver. : 0.1 Date : 2014/07/24 1. Put the C case on fixture. () 2. Loosen cover screw (6052B ) * 6. ()

31 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 2(1/1) Name : Disassemble Cover Ver. : 0.1 Date : 2014/07/24 1. Loosen cover screw (6052B ) * 5. ()

32 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 3(1/1) Name : Disassemble Cover Ver. : 0.1 Date : 2014/07/24 1. Put the machine on the fixture. () 2. Disassemble the cover (6070B ). () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

33 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 4(1/1) Name : Loosen Screws Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Loosen screw (6052A ) * 1. () 3. Loosen screw (6052B ) * 4. ()

34 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 5(1/1) Name : Loosen Screws Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Loosen screw (6052A ) * 2. () 3. Loosen screw (6052B ) * 4. () Fig.2

35 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 6(1/1) Name : Loosen Screws Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Loosen screw (6052B ) * 7. () 將 C 件 放 於 治 具 上, 如 2. 拆 螺 絲 *7(6052B ), 如 3. 將 C 件 放 回 流 水 線 起 子 头 号 数 #1 扭 力 :1.5 ± 0.2 Kgf.cm 螺 丝 不 可 滑 牙 锁 附 顺 序

36 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 7(1/1) Name : Loosen Screws Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Loosen screw (6052B ) * 6. ()

37 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 8(1/1) Name : Loosen Battery Screws Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Loosen screw (6052B ) * 4. () 3. Take out the battery. 4. Disconnect battery cable. ()

38 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 9(1/1) Name : Disassemble Keyboard Ver. : 0.1 Date : 2014/07/24 1. Disassemble FFC from KB CNTR. () 2. Disassemble FFC from keyboard back light CNTR. (Fig.3) Fig.3 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

39 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 10(1/1) Name : Disassemble Keyboard Ver. : 0.1 Date : 2014/07/24 1. Turn over, then disassemble the keyboard. (/2) Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

40 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 11(1/1) Name : Disassemble Frame Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 1 2. Loosen screw (6052B ) * 4. () 3. Disassemble the frame (6053B ). () 4 2 3

41 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 12(1/1) Name : Disassemble SD Card/B Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. SD M/B 2. Loosen screw (6052B ) * 3. 3 Disassemble the SD card/b (1310A ) SD T/P

42 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 13(1/1) Name : Disassemble DC-in Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Disassemble DC-in CNTR. (Fig.4) 3. Disassemble the DC-in cable. (Fig.3) 4. Disassemble SD card & T/P CNTR FFC. () SD M/B release paper Fig.3 SD T/P Fig.4

43 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 14(1/1) Name : Disassemble Hinge Cable CNTR * 2 Ver. : 0.1 Date : 2014/07/24 1. Disassemble hinge cable CNTR R. 2. Disassemble hinge cable CNTR L. Left Right Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

44 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 15(1/1) Name : Disassemble M/B Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Loosen screw (6052B ) * 2, then disassemble base/b.

45 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 16(1/1) Name : Loosen Hinge Screws Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Loosen screw (6052A ) * 2. ( / Fig.4) 2 1 Fig.4 Fig.3 Electric screwdriver (#1) 1

46 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 17(1/1) Name : Disassemble Hinge Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Loosen screw (6052A ) * 4. () 3 2 Hinge Module 4 1 Electric screwdriver (#1) 1

47 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 18(1/1) Name : Disassemble Hinge Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. 2. Disassemble the hinge. Electric screwdriver (#1) 1

48 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 19(1/1) Name : Disassemble Bracket Ver. : 0.1 Date : 2014/07/24 1. Put the C case on the fixture. () 2. Disassemble the membrane on T/P CNTR. () 3. Rip gasket. () 4. Loosen screw (6052B ) * 2. (Fig.3) 4. Disassemble touchpad button bracket (6037B ). membrane 2 1 gasket Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

49 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 20(1/1) Name : Disassemble Touch Pad Ver. : 0.1 Date : 2014/07/24 1. Disassemble touch pad (6034B ). () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

50 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 21(1/1) Name : Disassemble Hinge Cover Ver. : 0.1 Date : 2014/07/24 1. Disassemble hinge cap (6051B ). (Fig.4) 2. Disassemble Hinge Cover (6070B ). ( / / Fig.3) Fig.4 Fig.3 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

51 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 22(1/1) Name : Disassemble Hinge Latch Arm Ver. : 0.1 Date : 2014/07/24 1. Rip the acid tape on hinge * 2. (Fig.3/ Fig.4) 2. Loosen screw (6052B ) * 1. () 3. Disassemble the hinge latch arm. (6051B ) 1 Fig.3 Fig.4

52 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 23(1/1) Name : Disassemble Hinge Set Ver. : 0.1 Date : 2014/07/24 1. Put hinge on the fixture. 2. Loosen hinge screw (6052B ) * 1. () 1

53 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 24(1/1) Name : Disassemble Hinge Set Ver. : 0.1 Date : 2014/07/24 1. Put hinge on the fixture. (Fig. 2) 2. Loosen screw (6052B ) * 4. (Fig.3) 3. Disassemble hinge set (6051B ). (/ 2) 1 Fig

54 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 25(1/1) Name : Disassemble Hinge/B Ver. : 0.1 Date : 2014/07/24 1. Put hinge (6055B ) on the fixture. () 2. Loosen screw (6052B ) * 2. (Fig.4) 3. Disassemble the hinge/b. ( /3) Fig Fig.4

55 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 26(1/1) Name : Disassemble Hinge Latch Ver. : 0.1 Date : 2014/07/24 1. Put hinge (6055B ) on the fixture. () 2. Loosen screw (6052B ) * 4. (Fig.3) 3. Disassemble latch (6051B ) and spring (6053B ). () Fig.3

56 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 27(1/1) Name : Disassemble Hinge - R & L Ver. : 0.1 Date : 2014/07/24 1. Loosen screw (6052A ) * 6. ()

57 Document No. Kitkat FA (Base) DIS ASS Y SOP Station : 28(1/1) Name : Disassemble Hinge POM Ver. : 0.1 Date : 2014/07/24 1. Disassemble POM (6051B ) * 2. () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty