For high-speed differential signal line/general signal line
|
|
- Thomasina Jenkins
- 7 years ago
- Views:
Transcription
1 Common Mode Filters For high-speed differential signal line/general signal line ACM series Type: ACM0 ACM0 ACM ACM [080 inch]* [008 inch] [0 inch] [8 inch] * Dimensions Code [EIA] Issue date: September 0 Conformity to RoHS Directive: This means that, in conformity with EU Directive 00/9/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
2 (/) Common Mode Filters For High-speed Signal Line / General Signal Line ACM Series ACM0, 0,, Conformity to RoHS Directive FEATURES Although greatly miniaturized, this wire-wound chip-type filter maintains the characteristics needed for a common filter. Common impedance is 000Ω [at 00MHz], so this filter is greatly effective in supporting noise. Almost no affect upon even high speed signals since differential impedance is kept low. This series includes both -line and -line types. They are used for various types of circuits and noise. APPLICATIONS Used for radiation noise suppression for any electronic devices. Used to counter common noise affecting signals within high-speed lines. USB line for personal computers and peripheral equipment. IEEE9 line for personal computers, DVC, STB, etc. LVDS, panel link line for liquid crystal display panels. TEMPERATURE RANGES Operating Storage(After mount) to +8 C to +8 C PACKAGING STYLE AND QUANTITIES Packaging style Type Reel Quantity ø80mm 000 pieces/reel ACM0 ø0mm 0000 pieces/reel ø80mm 000 pieces/reel ACM0 ø0mm 0000 pieces/reel Taping ø80mm 000 pieces/reel ACM ø0mm 000 pieces/reel ø80mm 00 pieces/reel ACM ø0mm 000 pieces/reel PRODUCT IDENTIFICATION ACM P - T () () () () () () () Series name () Dimensions L W 0:.0.mm () Impedance[at 00MHz] 900: 90Ω () Number of line P: -line P: -line () Packaging style T: ø80mm reel taping TL: ø0mm reel taping () TDK internal code RECOMMENDED SOLDERING CONDITIONS RECOMMENDED TEMPERATURE PROFILE FOR LEAD-FREE SOLDER 0 C 80 C 0 C Peak C max. 0 to 0s 0 to 0s Time(s) Natural cooling REFLOW PROFILE FOR SOLDER HEAT RESISTANCE 0 C Peak 0 C max. Natural cooling 80 C 0 C 0 to 0s 0s max. Time(s) Conformity to RoHS Directive: This means that, in conformity with EU Directive 00/9/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications / 0098 / e97_acm.fm
3 (/) SHAPES AND DIMENSIONS/CIRCUIT DIAGRAMS/RECOMMENDED PC BOARD PATTERNS -LINE TYPE ACM0-P.0±0..±0. Wires.max. Termination Termination ACM0-P ACM-P.±0..0±0..±0. Terminal electrode.±0..max..±0. Insulation resin LINE TYPE ACM0-P ACM-0-P.0±0..±0..=P0. 0..±0.. Wires Electrode.=P Terminal electrode.±0...max. 0..±0. 0. Insulation resin / 0098 / e97_acm.fm
4 (/) ELECTRICAL CHARACTERISTICS Part No. Impedance (Ω)typ.[00MHz] DC resistance (Ω)max.[per line] Rated voltage Edc(V)max. -LINE ACM0-900-P ACM0--P ACM0-0-P ACM0--P ACM0-0-P ACM0--P ACM0-0-P ACM0-0-P ACM-800-P ACM--P ACM-7-P ACM-0-P LINE ACM0-80-P ACM-0-P Rated current Idc(A)max / 0098 / e97_acm.fm
5 (/) TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS -LINE ACM0-900-P ACM0--P ACM0-0-P ACM0--P Common Common Common Common ACM0-0-P ACM0--P ACM0-0-P ACM0-0-P Common Common Common Common ACM-800-P ACM--P ACM-7-P ACM-0-P Common Common Common Common MEASURING CIRCUITS -LINE Common HP9A HP9A 00-0 / 0098 / e97_acm.fm
6 (/) TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS -LINE ACM0-80-P ACM-0-P Common Common MEASURING CIRCUITS -LINE Common HP9A HP9A 00-0 / 0098 / e97_acm.fm
February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s February 2015 Chip Beads For power line HF-ACC Series HFxxACC3216 [1206 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationNovember 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s November 0 -terminal Filters For signal line MEM series MEM0S MEM0SC MEM0V MEM0F MEM608P 0[0805 inch]* 0[0805 inch] 0[0805 inch] 0[0805 inch] 608[060 inch] * Dimensions Code JIS[EIA]
More informationUSB2.0 Technical Manual
TDK EMC Technology Practice Section USB2.0 Technical Manual TDK Corporation Magnetics Business Group Mitsuharu Mizutani 1 Introduction USB2.0 was released in April of 2000 and it has become the standard
More informationSPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
September 2014 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 SPM3015 SPM3020 SPM4012 SPM4015 SPM4020 SPM5012 SPM5015 SPM5020 SPM5030 SPM6530 (2/49) REMINDERS FOR USING
More informationDISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
More informationPhysical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Wiremount Receptacle (Female) E206 Series Designed to mate to all M I/O Interconnect System 2.0 mm for IEEE 194 Boardmount Plugs Polarized to provide proper
More informationHow To Counter Noise Noise From A Low Voltage Differential Signaling Circuit
TDK EMC Technology Practice Section EMC Countermeasures of Low Voltage Differential Signaling Circuits TDK Corporation Magnetics Business Group Toshio Tomonari 1 Introduction Low Voltage Differential Signaling
More informationR D E W F. 1 Semiconductive Ceramics 2 Internal electrode 4 Terminal electrode Intermediate electrode. 5 External electrode
Multilayer Varistor for ESD pulse [DC lines/high speed signal lines] Series: EZJZ, EZJP Excellent ESD suppression due to original advanced material technology Having large electrostatic resistance meeting
More informationDISCONTINUED (2009) RA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS compliant FEATURES Ultra high sensitivity (75 to 150 mw) High reliability-bifurcated contacts Conforms to FCC rules and regulations
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationMAXIMUM LOAD CURRENT 1 A SN SERIES
SOLID STATE RELAY (I/O Module) MAXIMUM LOAD CURRENT 1 A SN SERIES RoHS compliant FEATURES I/O modules for interface between CPU and external input devices or loads Ultra slim and light weight, SIL s type
More informationGas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
More informationFusca 2.4GHz SMD Antenna
Product Specification 1 Features Designed for 2.4GHz applications [Bluetooth, WiFi (802.11b/g), ZigBee, etc.] Intended for SMD mounting Supplied in tape on reel 2 Description The Fusca antenna is intended
More informationDISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) FBR2 SERIES RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability
More informationToner Density/Quantity Sensors
Toner Density/Quantity Sensors Permeability sensing type TS series Type: Issue date: TS-L(Double-sided substrate type) TS-(One-sided substrate type) TS-K(One-sided substrate type) February 007 Conformity
More informationMADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
More informationA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms
More informationDISCONTINUED (2012) VB SERIES 2 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 2 POLE 5 A (MEDIUM LOAD CONTROL) VB SERIES RoHS compliant FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-3 rated Working class: C UL class B (130 C) insulation Type of service: continuous
More information3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
More information4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
More information3M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series Stackable Tin Lead or gold plating available Solder stand-offs facilitate production wave soldering Board pin
More information1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
More information3M High Flex Life Cable.050" 28 AWG Stranded, PVC 3319 Series
M High Flex Life Cable.050" 28 AWG Stranded, PVC 19 Series Flex life of 100 million cycles at 1 /4 inch diameter 19 strands of high strength copper alloy provide the longest flex life available for dynamic
More informationWurth Electronics Midcom Policy Statement on RoHS Compliance And Lead-Free Products
Wurth Electronics Midcom Policy Statement on RoHS Compliance And Lead-Free Products General Environmental Policy Wurth Electronics Midcom is committed to the manufacture of environmentally-friendly products
More informationJanuary 2015. Inductors for Power Circuits. Wound Ferrite. VLCF Series. VLCF5028-2 Type VLCF5028-2
January 2015 Inductors for Power Circuits Wound Ferrite VLCF Series VLCF5028-2 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationAPPROVAL SHEET. Mid-tower computer case MODEL NO.: SPD202B-420W-PFC. Spire Corp.
APPROVAL SHEET Mid-tower computer case MODEL NO.: SPD202B-420W-PFC Article No. : SP-AP-CP-A1012 Issue Date : Apr 13 2011 Version : A/0 Audited by Checked by Drafted by Spire Corp. Tel.: +86-755-26801568
More informationOPERATION MANUAL MARSDEN-200 PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE STARTING TO USE THE SCALES
OPERATION MANUAL MARSDEN-200 PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE STARTING TO USE THE SCALES 1 TABLE OF CONTENTS POWER SUPPLY... 3 SPECIFICATIONS... 3 MAINATENANCE AND GENERAL CARE........
More informationGP2Y1010AU0F. Compact Optical Dust Sensor. Description. Compliance. Applications. Features GP2Y1010AU0F. 1. Compliant with RoHS directive (2002/95/EC)
GPY00AU0F Compact Optical Dust Sensor Description GPY00AU0F is a dust sensor by optical sensing system. An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device.
More informationVS-500 Voltage Controlled SAW Oscillator
VS-500 Voltage Controlled SAW Oscillator Features Improved High Performance ASIC Industry Standard Package, 9 x 14 x 4.5 mm Frequencies from 155 MHz to 850 MHz 3.3 V or 5.0 V Operation At 155.52 MHz, Jitter
More informationSURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
More information1 POLE - 5A SLIM POWER RELAY
POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw
More informationINTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components
More informationLUXEON 5630 Mid-Power LEDs Illumination Portfolio
LUXEON 5630 Mid-Power LEDs Illumination Portfolio Introduction LUXEON 5630 delivers optimized performance in combination with quality of light needed for distributed light source applications. In addition
More informationGP2Y0D810Z0F. Distance Measuring Sensor Unit Digital output (100 mm) type GP2Y0D810Z0F
GP2Y0D810Z0F Distance Measuring Sensor Unit Digital output (100 mm) type Description GP2Y0D810Z0F is distance measuring sensor unit, composed of an integrated combination of PD (photo diode), IRED (infrared
More informationBrevis GPS SMD. The A10204 GPS antenna is intended for reception of GPS signals at 1575 MHz.
Brevis GPS SMD Antenna Product Specification 1 Features GPS antenna designed for embedded applications Designed for use with the ground plane extended beneath the antenna Good efficiency to size ratio
More informationROTARY CODED SWITCHES (SMD)
COPL ELECTRONICS RoHS compliant INTERNL STRUCTURE ETURES soldering Low profile of. mm Wide variety (top or side setting,, or positions, J-hook, gull wing or throuhg hole pins) to choose from Compatible
More informationMP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
More informationTC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
More information2016 Mid Power LED. 2016 Mid Power Product Datasheet. Features: Table of Contents. Applications
2016 Mid Power LED Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Diagram.... 5 Color Ranks.... 5 Features: High efficacy CRI Options:
More information3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationhandbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
More informationHigh Frequency Ceramic Solutions
Page 1 of 6 General Specifications - Mounting Part Number 2450AT43A100 Frequency Range 2400-2500 Mhz Peak Gain 2.0 dbi typ. (-V) Average Gain 0.5 dbi typ. (-V) 9.5 db min. Input Power Impedance Operating
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
More informationRufa 2.4 GHz SMD Antenna Part No. 3030A5839 / 3030A5887 Product Specification
Product Specification 1 Features Designed for 2.4 GHz applications: Bluetooth, Wi-Fi (802.11b/g), ZigBee, etc. Easy to integrate Low profile design for use with no ground beneath the antenna High efficiency
More informationMetal Film Resistors, Industrial, Precision
CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
More informationMultiple colors, a single focal length
Illumination LUXEON C Color Line Multiple colors, a single focal length The LUXEON C Color Line is an optically advanced portfolio of Color and White LEDs. Designed for flawless color mixing, LUXEON C
More informationHigh flux for outdoor applications
General Illumination LUXEON R High flux for outdoor applications LUXEON R brings illumination grade LED light sources to outdoor and industrial lighting applications and makes it easier than ever to design
More informationMAAD-007084-0001TB. Digital Attenuator 15.5 db, 5-Bit, TTL Driver, DC-2.0 GHz Rev. V2. Features. Schematic with Off-Chip Components.
MAAD-007084-00000 5.5, 5-Bit, TTL Driver, DC-2.0 GHz Rev. 2 Features Attenuation: 0.5 Steps to 5.5 Low DC Power Consumption Integral TTL Driver 50 ohm Impedance Test Boards are Available Tape and Reel
More informationChrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
More informationEMC countermeasures for High-Speed Differential Interfaces
TDK EMC Technology Practice Section EMC countermeasures for High-Speed Differential Interfaces How Do Common Mode Filters Suppress EMI in Differential Transmission Circuits? TDK Corporation Application
More informationFeatures. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),
More informationCMS Common mode inductors, surface mount
Technical Data 4313 Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use
More informationConnectors for PCMCIA ExpressCard Technology
DESCRIPTION PCMCIA ExpressCard technology is the next generation for the PC Card standard. The 26 pin host and module connectors offer a smaller form factor than existing PC Card technology. The same connectors
More informationFusca 2.4 GHz SMD Antenna
Product Specification 1 Features Designed for 2.4 GHz applications: Bluetooth, Wi-Fi (802.11a/b/g/n), ZigBee, etc. as well as 2.3 GHz WiMAX, 2.5 GHz WiMAX and WiBro. Easy to integrate Low profile design
More informationMASW-007070-0001TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information
Features Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel are Available Lead-Free 4 x 6 mm PQFN Package
More informationCLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
More informationChrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited
More information3M Twisted Pair Flat Cable.050" 28 AWG Stranded, Mass Terminatable Pair, PVC 1700 Series
M Twisted Pair Flat Cable.050" 28 AWG Stranded, Mass Terminatable Pair, PVC 1700 Series Wires are color-coded for easy identification Twist and flat repeat has variable length option Can be mass terminated
More informationGP2Y0A02YK0F. Distance Measuring Sensor Unit Measuring distance: 20 to 150 cm Analog output type GP2Y0A02YK0F
GP2Y0A02YK0F Distance Measuring Sensor Unit Measuring distance: 20 to 150 cm Analog output type Description GP2Y0A02YK0F is a distance measuring sensor unit, composed of an integrated combination of PSD
More informationIP4234CZ6. 1. Product profile. Single USB 2.0 ESD protection to IEC 61000-4-2 level 4. 1.1 General description. 1.2 Features. 1.
Rev. 01 16 April 2009 Product data sheet 1. Product profile 1.1 General description The is designed to protect Input/Output (I/O) USB 2.0 ports, that are sensitive to capacitive loads, from being damaged
More informationSPECIFICATION MARITEX 06/30/ 08 CHIP INDUCTORS (ROHS)
FL201209SERIESLFR FL201209SERIESLFR Scope: This specification applies to multilayer ferrite & ceramicchip inductors. 1. Part Number Key & Mechanical Drawing FL XX XX XX XXX X A B C Tolerance Inductance
More informationPC852XJ0000F Series PC853XJ0000F Series
PC85XJF Series/PC85XJF Series PC85XJF Series PC85XJF Series DIP pin Darlington Phototransistor Ouput, High Collector-emitter Voltage Photocoupler Description PC85XJF Series/PC85XJF Series contains an IRED
More informationAPPROVAL SHEET. Chip Coolers. Spire Corp.
APPROVAL SHEET Chip Coolers SALES MODEL NO: SP532S7 ENGINEER NO: SC532S3-093-AM3W2- Article No. : SP-AP-SC-A2 Issue Date : Sep 7, 2009 Version : A/0 Audited by Checked by Drafted by Denny Spire Corp. Tel.:
More informationICS379. Quad PLL with VCXO Quick Turn Clock. Description. Features. Block Diagram
Quad PLL with VCXO Quick Turn Clock Description The ICS379 QTClock TM generates up to 9 high quality, high frequency clock outputs including a reference from a low frequency pullable crystal. It is designed
More informationSPECIFICATION. Patent Pending
SPECIFICATION Patent Pending Part No. : PA.7. A Viking Product Name : Wide-Band LTE/Cellular/CDMA SMD Antenna For all in one 2G/3G/4G applications worldwide LTE/GSM / CDMA / DCS / PCS / WCDMA / UMTS /HSDPA
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationSTF201-22 & STF201-30
Description The STF201 is a combination EMI filter and line termination device with integrated TVS diodes for use on downstream USB ports. It is constructed using a proprietary technology that allows passive
More informationPulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
More informationBW-500 BED WEIGHER USER MANUAL
BW-500 BED WEIGHER USER MANUAL 0 1 TABLE OF CONTENTS SPECIFICATION... 3 Equipment... 4 INSTALLING WEIGH BEAM... 5 PREPARATION FOR MEASUREMENT... 6 DP3800 Indicator... 8 POWER SUPPLY... 8 PANEL... 9 KEY
More information0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
More informationPCB RoHS Update OCT08 ELECTRONICS MANUFACTURING SERVICES
PCB RoHS Update CT08 ELECTRNICS MANUFACTURING SERVICES 2006 Sanmina-SCI Corporation. Sanmina-SCI is a trademark of Sanmina-SCI Corporation. All trademarks and registered trademarks are the property of
More informationPC817XNNSZ0F Series. DIP 4pin Photocoupler. Description. Agency approvals/compliance. Applications Features PC817XNNSZ0F
PC817XNNSZ0F Series DIP 4pin Photocoupler Description PC817XNNSZ0F Series contains an IRED optically coupled to a phototransistor. It is packaged in a 4-pin DIP. Input-output isolation voltage(rms) is
More informationUSB Smart Power Sensor
50Ω -30 dbm to +20 dbm, 1 MHz to 8000 MHz The Big Deal Low cost USB HID device compatible with 32/64 Bit operating systems Includes Measurement Application GUI (Graphical User Interface) software with
More informationApplication Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More informationClamp Filters that Suppress Emission Noise Provide Immunity Against Surge Noise
TDK EMC Technology Product Section Clamp Filters that Suppress Emission Noise Provide Immunity Against Surge Noise TDK Shonai Corporation Satoru Saito Reduce Emission Noise from Cables Even if an electronic
More informationHSD High Speed Data interconnection
HSD High Speed Data interconnection Fast, safe and robust Very high data bit rate up to 5 Gbit/s SSR smart strain relief enables unstressed solder joints Excellent resistance against cross-talk and RF-EMC
More informationAP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external
More informationC650 and C850 Series TBU High-Speed Protectors
*RoHS COMPLIANT Features Formerly brand Extremely high speed performance Blocks high voltages and currents Very high bandwidth; GHz compatible Small package, minimal PCB area Simple, superior circuit protection
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
More informationSESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
More informationFractus Compact Reach Xtend
Fractus Compact Reach Xtend Bluetooth, Zigbee, 82.11 b/g/n WLAN Chip Antenna Antenna Part Number: FR5-S1-N--12 This product is protected by at least the following patents PAT. US 7,148,85, US 7,22,822
More informationY.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
More informationMetal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally
More informationSELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
More informationOptocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
More informationSKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider
DATA SHEET SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider Applications TD-LTE systems Satellite communications 2.4 GHz ISM band Features Low insertion loss: 0.3 db @ 2.5 GHz High isolation:
More informationSMT inductors. SIMID series, SIMID 1812-A. Date: March 2008
SMT inductors SIMID series, Series/Type: Data Sheet Date: March 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein
More informationCYSH12AF (InSb) HALL-EFFECT ELEMENT
CYSH12AF (InSb) HALL-EFFECT ELEMENT Hall-effect element CYSH12AF is made of compound semiconductor material indium stibnite (InSb), which utilizes the Hall-effect principle. It can convert a magnetic flux
More informationProduct Name Hexa-Band Cellular SMD Antenna GSM / CDMA / DCS / PCS / WCDMA /UMTS /HSDPA / GPRS / EDGE 800 MHz to 2200 MHz
Anam PA.25a Specification Part No. PA.25a Product Name Anam Hexa-Band Cellular SMD Antenna GSM / CDMA / DCS / PCS / WCDMA /UMTS /HSDPA / GPRS / EDGE 800 MHz to 2200 MHz Feature High Efficiency Multi-Band
More information1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More informationJNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
More informationEMOSAFE EN-100. Network Isolators for PCB assembly 1 GENERAL DESCRIPTION. Product Data Sheet ENGLISH
ENGLISH EMOSAFE EN-100 Product Data Sheet Network Isolators for PCB assembly November 2013 1 GENERAL DESCRIPTION The EMOSAFE EN-100 Network Isolator interrupts all galvanically conducting connections (conductors
More informationKSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
More informationSELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope)
OBSOLETE NMPD0 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Efficiency (Min.) Power (Max.) V V % W NMPD003C 3. 9.50 NMPD005C 5. 9.5 NMPD0C. 0 0.00 NMPD05C 5. 9 0.00 FEATURES RoHS
More information