Lumega 700 LED Lumega 700 LED Safely economic Safe: Uncomplicated: Robust: Versatile: Forward-fit:

Transcription

1 Lumega 700 LED

2 Lumega 700 LED Lumega 700 LED Safely economic Lumega 700 LED provides effective and efficient lighting of streets and walkways. A total of 48 LEDs with different distributions deliver a luminous flux between 5000 and 8000 lumens. The LEDs of the road luminaire are each equipped with a separate lens system, which optimally distribute and guide the light. Safe: Excellent illumination along the entire road, with variable installation locations including pavements, lessens the danger of accidents. Uncomplicated: Installation, maintenance and upgrading of the luminaire is child s play due to intelligent construction. Robust: High quality materials and high IP66 protection rating mean a long service life. Versatile: Wide application spectrum via optimal light control and diverse luminaire luminous flux levels. Forward-fit: The modular design means upgrading to later, more efficient LED generations is easy.

3 The replaceable LED module combines different functions. The die-cast aluminium housing ensures a very effective thermal management and thus a long service life for the LEDs. The 48 High-Power LEDs are each equipped with a lens system that delivers optimum distribution of light. The sealed flat cover not only prevents light from being emitted upwards, but also contributes to complying with the high IP66 degree of protection. Both corrosion-resistant catches installed in the Lumega allow for tool-free access to the luminaire s IP66 connection compartment. The clip cap is lockable and secured against falling down. The electrical module, which can be removed without tools, includes all necessary electrical components. Electrical plug connections and mechanical adjustments facilitate easy handling. Both the LED module and the electrical module can be installed without tools. That allows for a quick and thus cost-effective retrofitting of the LED technology. After removing unnecessary components and installing the LED module, it is only necessary to install the electric module and connect the luminaire to the power supply.

4 Lumega 700 LED Post-top and bracket-mounted luminaire 65M IP m 9711SG-AB 9711SG-AB Designation TOC Control gear Lamps/ Connected kg options Lamp luminous flux/ load ET lamp colour W Lumega 700 LED with flat cover (SG), safety class II 9711SG-AB/LED 5000 nw LED/5000 lm/nw SG-AB/LED 6500 nw LED/6500 lm/nw SG-AB/LED 8000 nw LED/7750 lm/nw Recommended areas Post-top and bracket-mounted luminaire with flat cover SG for illuminating streets, parking areas and outdoor work areas. Luminaire body made of die-cast aluminium, bi-coloured, light grey, similar to RAL 7035 and anthracite grey RAL 7016, powder-coated, highly weather-resistant. Pole top 76 mm. LED module made of die-cast aluminium housing with integral LED and optical systems. With cover made of clear impactresistant PMMA, sealed in frame. Can be lowered and suspended without tools. Optical system asymmetrical wide-angle light distribution AB. Consisting of highly efficient, UV and temperature-resistant lens systems. An optical system for every LED. Angle of inclination, adjustable. Pole-top luminaire , bracket-mounted luminaire Connection housing can be opened without tools by means of large, easy-to-use lever locks. 971 SG Electrical block with all electrical components, accessible from above and replaceable without tools. Two separate circuits allow for a simple wattage reduction (half-night lighting) Connection terminal 3-pole for wires up to 2.5 mm². Cable gland M20 as strain relief system. For wires up to 6 to 12 mm Control gear options ET With electronic transformer Area exposed to wind FW= m² 268

5 Lumega 700 LED Conversion kit US 9711SG Designation TOC Control gear Lamps/ Connected kg options Lamp luminous flux/ load ET lamp colour W Conversion kit for Lumega 700 LED with flat cover, safety class II US 9711SG-AB/LED 5000 nw LED/5000 lm/nw US 9711SG-AB/LED 6500 nw LED/6500 lm/nw US 9711SG-AB/LED 8000 nw LED/7750 lm/nw Conversion kit US consisting of LED module and electrical module for simple retrofitting of Lumega 700 series luminaires based on LED technology. LED module made of die-cast aluminium housing with integral LED and optical systems. With cover made of clear impactresistant PMMA, sealed in frame. Can be lowered and suspended without tools. Optical system asymmetrical wide-angle light distribution AB. Consisting of highly efficient, UV and temperature-resistant lens systems. An optical system for every LED. Electrical block with all electrical components, accessible from above and replaceable without tools. Two separate circuits allow for a simple wattage reduction (half-night lighting). Control gear options ET With electronic transformer.

6 Contacts TRILUX GmbH & Co. KG Heidestraße D Arnsberg Postfach D Arnsberg Tel. +49 (0) Fax +49 (0) PROLJUS AB Kyrkogatan VRIGSTAD Tel. +46 (0)

7

8 11/42-GB-int