N8LED Large Area Lighting

Transcription

1 INDUSTRIAL LIGHTS

2 N8LED Large Area Lighting The N8LED (= NachtLED) is a mobile, energy efficient large area LED light and is specially designed to illuminate all construction and assembly sites in industry and trade, for use by rescue and emergency services, for control operations, army and events. Radiantly beautiful... Very sturdy and simple design, specially built for the mobile use Highly accessibility thanks to LED modules individually supplied via drivers Modular design, LED modules and drivers individually replaceable Full performance immediately after switching on and uniform illumination over a large area Fast and easy setup of lighting unit Tool-free assembly and disassembly thanks to captive safety spring cotter pin and disassembly ring The stand adapter can be inserted into the receptacle from both sides, allowing both downward and upward illumination. The tilt joint can be used to bring the N8LED into different positions from 0 to 90. Technical data: Voltage: 230V~ (+/- 10%) Option: 42V~ or 24V~ (+/- 10%) Rated frequency: 50Hz Power consumption: 400W No. of LEDs: 8x28 LEDs Total luminous flux: approx Lumen Colour temperature: Kelvin (daylight) Weight: 14,0 kg (without stand) Angle of radiation: 360 degrees Ingress protection: IP65 Protection degree: II Usage temperature range: -20 C bis +40 C Dimensions: Ø 640 x 90 mm Photobiological safety acc. to DIN EN 62471: free group German utility: Community design: Carrying bag with adjustable carrying strap for storing and transporting the N8LED, supply line, accessories and operating manual. 2

3 Description: Stainless-steel frame Polycarbonate lens optics 120 Plastic powder coated aluminium lamp housing Stand receptacle - adaptor for DIN stud LED board Finger grips Ø 640 mm low wind load 90 mm Eye hook receptacle Aluminium cooling element incl. LED Scraper ring lamp fastening and spring cotter pin Stand receptacle - adaptor for DIN stud Aluminium lamp cover Depression for receiving the line stopper Connector + Thermal protection switch Projekt 1 ELSPRO Elektrotechnik GmbH & Co. KG Kleinhülsen Hilden Bearbeiter(in) Thomas Cramer Telefon Fax [email protected] ELSPRO Elektrotechnik GmbH & Co. KG N8LED 828 LED - Grossflaechenbeleuchtung / Kegeldiagramm Leuchte: ELSPRO Elektrotechnik GmbH & Co. KG N8LED 828 LED - Grossflaechenbeleuchtung Lampen: 1 x LED E(0 ) 5028 E(C0) E(0 ) 1257 E(C0) E(0 ) 559 E(C0) E(0 ) 314 E(C0) E(0 ) 201 E(C0) distance [m] cone diameter [m] C0 - C180 (half-peak divergence: ) luminance intensity [lx] Seite 1 3

4 N8LED Large Area Lighting Cat. Numbers / Accessories: N8LED Large Area Lighting incl. 10m supply line with plug 230V and stopper stand-adapter with hinge for DIN stud (DIN 14640) operating manual colour: grey (DB703) Cat.No.: Option: Colour red (RAL3024) Carrying bag robust carrying bag for N8LED, stand-adapter, supply line, and operating manual diameter 650mm, height 150mm, colour: black material: outside nylon, inside special foam with surrounding strong zip Cat.No.: Industrial telescope stand 4,8m stable stainless steel telescopic stand for industry and fire departments stainless-steel aisi 304, tubes Ø mm, thickness 1,5mm 3 blocking systems aluminium with fasteners, colour: red shock-absorber for smooth descending stands with round plate Ø 80mm and pin (1 stand adjustable) DIN - stud according DIN 14640, incl. plate for guy ropes height up to max. 4,80m in folded condition height = 1,45m stand weight 17,9 kg, max. carrying load 20 kg diameter of the stand (open) 1,60 m max. 4,8 m Cat.No.: Guy ropes (3 pcs.) for stainless steel telescopic stand (for safety according local regulations) 3 x guy ropes: 7,5m polyamide - rope Ø 4mm, white according DIN EN ISO 1140, 1 snap hook acc. DIN 5299-C80, 1 ring galvanized A 40x5 acc. DIN52961, rope thimble acc. DIN68992, rope clamp, adjustment element for length adjustment of the rope Cat.No.: Ground anchor 400mm (3 pcs.) for mounting the guy ropes on the ground material: steel, hot-dip galvanised Cat.No.:

5 LED Powertube Mobile Large Area Lighting When it comes to lighting a large area, the POWERTUBE is the ideal solution for construction sites, sporting and other event venues such as fire fighters, film and theatre. Quick mounting and dismounting without preheating or cooling-off time Maintenance-free with passive cooling and long-life LED technology Illumination of up to lumen in daylight white Delivery with stable carrier bag for transport and storage mobile large area lighting fast mounting and dismounting time no preheating necessary passive cooling system (maintenance free) Impact-resistant and break-proof housing low wind load floor, stand or hanging mounting possible high protection IP54, class II Version: housing polycarbonate edge protection rubber blue covers (top & bottom) aluminium toggle switch (OFF/100%/50%) 5m cable H07RN-F 3G1,5 with safety plug 2P+E 230V incl. LED module and carrying bag LED POWERTUBE 93W 8xLED, 93W, lm (5.000K) H=560mm Ø 270mm weight: 6,9kg incl. carrying bag Cat.No.: LED POWERTUBE 186W 16xLED, 186W, lm (5.000K) H=820mm Ø 270mm weight: 9,0kg incl. carrying bag Cat.No.: Crank tripod 4,2m Steel, suitable for 16 & 28 mm spigots, safety bolt, self braking clutch/winch, fold-away crank, one adjustable stand to compensate uneven terrain packing dimensions: L=1850, W=230, H=160 mm Cat.No.: Tripod adapter with locking screw for stud 28mm for crank tripod , steel, powder coated Cat.No.:

6 LED light with rechargeable battery, 5x3W The rechargeable lamp type 5x3W is a modern working and inspection lamp, which is for varied uses and applications such as: Inspection lamp for maintenance purposes Work light Private use Technical data LED battery lamp 5x3W: Housing material: Plastic shockproof gummed, aluminium lamp head black Weight: approx.850g incl. rechargeable battery Ingress protection: IP 65 LED: 5x3W 900 lm Battery/voltage: Battery Lithium-Ion 7,4VDC 4400mAh Charger: 230VAC 50/60Hz IP20, Car 12/24VDC/8,4VDC optional 5-times charger 230VAC Light function: 100% / 60% / SOS / OFF Lighting time: mode 100% approx. 5h, mode 60% approx. 9h Capacity display: GREEN>65%, YELLOW 25-65%, RED 10-25%, RED blinking <10% Temperature range: -20 C to +45 C (charge +10 C to +30 C) Additional features: Base with magnet 4x50N, handle can be swivelled 180 Cat.No.: Option: charger 5-times 230V/70VA for simultaneous charging of 5 pcs. lights Cat.No.: LED battery-powered hand lamp with magnets with 21 LED-worklight and 5 LED-spot Ingress protection IP40; protection class II; pressure-resistant plastic housing; operating time up to 8 hours, charging time approx. 5 hours, state of charge indicator, two operating modes: 21 LEDs / 5 LEDs-Spot, ; Li-ion-battery 3,7V/2000mAh; dimensions: 250x55x43mm Including compact charger 230V with 1,7 m power supply cable and car charger 12V Cat.No.:

7 PCE Mini LED The new PCE Mini LED combines several advantages in one lamp. Its 90 high-efficiency-smd LEDs offer a natural colour restitution (4.000K) and a 120 angle of reflected beam. At the same time, you benefit from the long life qualities and robustness of the latest LED-technology. Technical data: Voltage: V~ Rated frequency: Hz Power system: 32 W Power LED-Module: 30 W Lighting current: 3360 lm Luminous colour: 4000 Kelvin Dimensions (WxHxD) / weight: 213 x 410 x 145mm / 2,48kg Cable: 5m H07RN-F 3G1,5 with safety plug Housing / colour: 2-component plastic/rubber, red-black Ingress protection: IP54 Incl. switch (ON/OFF) and additional safety socket with lid on the side. Cat.No.: Lumen Accessories (optional) KLICK-FIX quick fastening: STAND TRIPOD (3-pcs.): sturdy, fast fixation (swivelling) simple, fast mounting solid, simple tripod (3-pieces) zinc coated metal with handle hight adjustable up to 2,75m Cat.No.: Cat.No.:

8 PC Electric GesmbH Diesseits St. Martin im Innkreis AUSTRIA TEL FAX Ver. 02/2015 EN Technical changes and printed errors reserved.