INFORMATION BROCHURE. M.Tech. (Part Time and Sponsored) Motilal Nehru National Institute of Technology Allahabad Allahabad (India)

Transcription

1 INFORMATION BROCHURE M.Tech. (Part Time and Sponsored) Hewlett-Packard Company M.Tech. (Part Time and Sponsored) Motilal Nehru National Institute of Technology Allahabad Allahabad (India)

2 Table of Contents S.N. Particulars Page No. 1. Programmes Offered 3 Master of Technology 2. Eligibility for Admission 4 Eligibility requirement in M.Tech. (Part Time) 4 Eligibility requirement in M.Tech. (Sponsored) 4 3. Eligibility and Seat Matrix for M.Tech. (Part Time and Sponsored) Application Procedure Admission criteria Fee structure Important Dates (Tentative) 17,18 8. Documents required Address for sending application form 18 The candidates are advised to read information brochure carefully and visit our website regularly for updates. In case of any legal dispute related to admission the jurisdiction will be limited to Allahabad courts only (Lower, District and High Court) and will not be subject to the jurisdiction of any other courts outside Allahabad. - 2 /18-

3 1. PROGRAMMES OFFERED Following M.Tech. programmes are offered by various departments: Master of Technology Duration: 2 Years (4 semesters for Sponsored and 6 semesters for Part Time) a. Applied Mechanics Department 1. M.Tech. Applied Mechanics 2. M.Tech. Materials Science and 3. M.Tech. Fluids 4. M.Tech. Biomedical b. Biotechnology Department 1. M.Tech. Biotechnology c. Chemical 1. M.Tech. in Chemical d. Civil Department 1. M.Tech. Environmental 2. M.Tech. Geo-Technical 3. M.Tech. Structural 4. M.Tech. Transportation e. Computer Science and Department 1. M.Tech. Computer Science & 2. M.Tech. Software 3. M.Tech. Information Security f. Department 1. M.Tech. Control & Instrumentation 2. M.Tech. Power Electronics & Drives 3. M.Tech. Power Systems g. Electronics and Communication Department 1. M.Tech Communication 2. M.Tech. Digital Systems 3. M.Tech. Microelectronics and VLSI Design h. Mechanical Department i. GIS Cell 1. M.Tech. Design 2. M.Tech. Production 3. M.Tech. Computer Aided Design and Manufacturing 4. M.Tech. Product Design & Development 5. M.Tech. Thermal 1. M.Tech. (GIS & Remote Sensing) - 3 /18-

4 2. ELIGIBILITY FOR ADMISSION (i) The candidate must have Bachelor s degree in /Technology or a Master s degree in appropriate discipline of science or equivalent (as given in section 3 of Information Brochure) with a minimum of 60% aggregate marks or CPI (Cumulative Performance Index on ten point scale) of 6.5 at qualifying Examination (as given in section 3 of Information Brochure). For SC/ST candidate s eligibility in specified minimum marks/cpi shall be relaxed by 5% as per the Government of India norms. (i) The eligibility conditions given above are the absolute minimum. Departments may prescribe any requirements over and above these, subject to the approval of the Senate. (ii) Reservation: Reservation will be provided as per rule of Government of India. M.Tech. (Part Time) Candidates under this category are admitted for the M.Tech. programme which are being offered on part-time basis. A Part-time candidate must have been in full time service for at least two years after completion of qualifying degree at the time of admission ( , the date of registration). The part-time classes shall be held in the evening on working days. Their semester load requirements for course work shall be about half of the full time course. The minimum duration of such course shall be of three years and maximum duration of the course shall be of five years. These courses are for the professionals working in the Allahabad district. This programme is a self financed programme and requires a minimum number of candidates to run. M.Tech. (Sponsored) a. Full-Time sponsored Masters' programmes students are those who receive financial support from AICTE under QIP scheme OR from Government/Semi-Government Institutions/Government/Semi- Government Organizations, under study leave. Such a candidate must be sponsored by his/her employer and must have been in employment with the sponsoring organization for at least two years at the time of admission ( , the date of registration). Candidates in service are to be released on study leave or extraordinary leave from the organization for full-time research work at the Institute and must furnish a sponsorship along with No-objection certificate from the employer. b. Foreign students shall be sponsored by their Government or awarded scholarship by Govt. of India, Indian Council for Culture Relations (ICCR) or other such agencies/organizations. 3. ELIGIBILITY AND SEAT MATRIX FOR M.TECH. (PART TIME AND SPONSORED) Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Applied Mechanics Aeronautical Aerospace Applied Mechanics Civil Civil & Planning Civil Technology Computer Aided Design of Structures Industrial & Production - 4 /18-

5 Mechanical & Automation Mechanical Mechanical Automobile Mechatronics Biomedical Group 1 Naval Architecture Ocean & Naval Architecture Production & Industrial Production Production & Management Structural Applied Electronics & Instrumentation Biomedical Instrumentation Ceramic Ceramic & Technology Control & Electrical & Electronics Electrical Instrumentation & Control Electronic Instrumentation & Control Electronics & Communication Electronics & Control Systems Electronics & Electrical Communication Electronics & Electronics & Instrumentation Electronics & Telecom Electronics Communication & Instrumentation - Electronics Electronics Instrument & Control Physics & Instrumentation Instrument Technology Instrumentation & Control Biomedical Instrumentation & Process Control Instrumentation Instrumentation Technology Medical Electronics Medical Instrumentation Medical Lab Technology Bioengineering Biological Sciences & Bioengineering - 5 /18-

6 Group 2 Biomedical Biosciences & Bioengineering Biotech Biotechnology Material Science & Biotechnology & Biochemical Machine Tools Material Science & Mechanical & Automation Mechanical Mechatronics Advanced Manufacturing & Mechanical Systems Design Aeronautical Aerospace Cement & Ceramic Technology Ceramic & Glass Technology Ceramic Ceramic & Technology - Ceramic Technology Chemical & Polymer - Chemical Chemical Technology Industrial & Production - Industrial Metallurgy Manufacturing /Technology Manufacturing Process Manufacturing Science & Material Science & /Technology Material Science & Metallurgical Materials & Metallurgical - Materials Science Mechanical Metallurgical & Materials - Metallurgical & Materials Technology - Metallurgical Metallurgical & Material Science Metallurgy Mineral Oil & Paint Technology Oil Technology Oils & Oleochemicals & Surfactants Technology Petro-Chemical /Technology Petroleum /Technology Plastic & Polymer Plastics /Technology - 6 /18-

7 Bio-Technology Chemical Fluid Biotechnology Chemical Polymer Science & Rubber Technology Polymer Science & Technology Polymer Technology Production & Industrial - Production Production & Management Aeronautical Aerospace Chemical Chemical Technology Civil Civil & Planning Civil Technology Industrial & Production Marine Technology Mechanical Mechatronics Ocean Ocean & Naval Architecture Production & Industrial Production Biochemical Bioengineering Bioinformatics Biological Sciences & Bioengineering Biosciences & Bioengineering Biotech Biotechnology Biotechnology & Biochemical Industrial Biotechnology Biotechnology & Biochemical Chemical & Polymer Chemical Chemical Technology Environment & Pollution Control Environmental Environmental Science & Food Food Technology Food Technology Oil & Paint Technology Oil Technology Oils - Oleochemicals & Surfactants Technology Paint Technology - 7 /18-

8 Civil Computer Science & Environmental Geotechnical Structural Computer Science & Petro-Chemical Petroleum Plastic & Polymer Plastics Polymer Science & Rubber Technology Polymer Science & Technology Polymer Technology Sugar Technology Civil Civil & Planning Civil Environmental Civil Technology Environment & Pollution Control Environmental Environmental Science & /Technology Civil Civil & Planning Civil Environmental Civil Technology Construction Construction Technology Civil Civil & Planning Civil Technology Construction & Project Management Construction Construction & Management Construction Technology Structural Applied Electronics Computer Applications Computer Computer Science Computer Science & Computer Science & Information Technology Computer Science/IT Control & Control & Instrumentation Control System Electrical & Electronics (Power) Electrical Power Electronic Instrumentation & Control - 8 /18-

9 Information Security Electronics Electronics & Avionics Electronics & Communication Electronics & Computer Electronics & Control Systems Electronics & Electrical Communication Electronics & Electronics & Information Systems Electronics & Instrumentation Electronics & Power Electronics & Telecom Electronics & Telematics Electronics Communication & Instrumentation Engine Electronics Design Technology Electronics Electronics Instrument & Control Electronics Science & Information & Communication Technology Information Information Science Information Science & /Technology Information Technology Instrument Technology Instrumentation & Control Instrumentation & Process Control Instrumentation Instrumentation Technology MCA Nano Science & Technology Power Control & Drives Software Systems Science Telecommunication VLSI System Design Applied Electronics Computer Applications) Computer Computer Science Computer Science & Computer Science & Information Technology Computer Science/IT Control & Control & Instrumentation) Control System Electrical & Electronics - 9 /18-

10 Software (Power) Electrical Power Electronic Instrumentation & Control Electronics Electronics & Avionics Electronics & Communication Electronics & Computer Electronics & Control Systems Electronics & Electrical Communication Electronics & Electronics & Information Systems Electronics & Instrumentation Electronics & Power Electronics & Telecom Electronics & Telematics Electronics Communication & Instrumentation Engine Electronics Design Technology Electronics Electronics Instrument & Control Electronics Science & - Information & Communication Technology Information Information Science Information Science & /Technology Information Technology Instrument Technology Instrumentation & Control Instrumentation & Process Control Instrumentation Instrumentation Technology MCA Nano Science & Technology Power Control & Drives Software Systems Science Telecommunication VLSI System Design Applied Electronics Computer Applications Computer Computer Science Computer Science & Computer Science & Information Technology - 10 /18-

11 Computer Science/IT Control & Control & Instrumentation Control System Electrical & Electronics (Power) Electrical Power Electronic Instrumentation & Control Electronics Electronics & Avionics Electronics & Communication Electronics & Computer Electronics & Control Systems Electronics & Electrical Communication Electronics & Electronics & Information Systems Electronics & Instrumentation Electronics & Power Electronics & Telecom Electronics & Telematics Electronics Communication & Instrumentation Engine Electronics Design Technology Electronics Electronics Instrument & Control Electronics Science & Information & Communication Technology Information Information Science Information Science & /Technology Information Technology Instrument Technology Instrumentation & Control Instrumentation & Process Control Instrumentation Instrumentation Technology MCA Nano Science & Technology Power Control & Drives Software Systems Science Telecommunication VLSI System Design Control & - 11 /18-

12 Electrical - (EE) Electronics & Communication - (EC) Control & Instrumentation Power Electronics & Drives Power Systems Communication Systems Digital System Electrical & Electronics (Power) Electrical Power Control & Electrical & Electronics (Power) Electrical Power Control & Electrical & Electronics (Power) Electrical Power Control & Communication Computer & Communication Control & Electrical & Electronics Electronic Instrumentation & Control Electronics & Communication Electronics & Electrical Communication Electronics & Electronics & Information Systems Electronics & Instrumentation Electronics & Power - Electronics & Telecom - Electronics & Telematics - Electronics Communication & Instrumentation Engine Electronics Design Technology Electronics Electronics Instrument & Control Telecommunication Applied Electronics & Telecommunication Communication Computer & Communication Control & Electrical & Electronics - 12 /18-

13 GIS Cell (GC) Microelectronics & VLSI Design GIS & Remote Sensing Electronic Instrumentation & Control Electronics & Communication Electronics & Electrical Communication Electronics & Electronics & Information Systems Electronics & Instrumentation Electronics & Power Electronics & Telecom Electronics & Telematics Electronics Communication & Instrumentation Engine Electronics Design Technology Electronics Electronics Instrument & Control Telecommunication Applied Electronics & Telecommunication Communication Computer & Communication Computer Computer Science Computer Science & Computer Science & Information Technology Control & Electrical & Electronics Electronic Instrumentation & Control Electronics & Communication Electronics & Electrical Communication Electronics & Electronics & Information Systems Electronics & Instrumentation Electronics & Power Electronics & Telecom Electronics & Telematics - Electronics Communication & Instrumentation Engine Electronics Design Technology) Electronics Electronics Instrument & Control Telecommunication - Agriculture Architectural Architectural Architecture & Regional Planning - 13 /18-

14 Mechanical Computer Aided Design & Manufacturing Design Architecture & Regional Planning - Civil Civil & Planning Civil Environmental Civil Technology Computer Computer Science Computer Science & Computer Science & Information Technology Computer Science & Technology Electronics & Communication Electronics & Instrumentation Electronics Geography Geology Information Technology MCA Architecture Mine Mining /Technology B.Arch Architecture (Power) Electronics & Geoinformatics Geo Informatics Aeronautical Aerospace Industrial & Production Industrial Industrial & Management Manufacturing Science & Mechanical & Automation Mechanical Mechanical Automobile Metallurgical Metallurgical & Material Science Metallurgy Production & Industrial Production Aeronautical Aerospace Industrial & Production Industrial Industrial & Management Manufacturing Science & - 14 /18-

15 Product Design and Development Production Mechanical & Automation Mechanical Mechanical Automobile Metallurgical Metallurgical & Material Science Metallurgy Production & Industrial Production Aeronautical Aerospace Industrial & Production Industrial Industrial & Management Manufacturing Science & Mechanical & Automation Mechanical Mechanical Automobile Metallurgical Metallurgical & Material Science Metallurgy Production & Industrial Production Aeronautical Aerospace Industrial & Production Industrial Industrial & Management Manufacturing Science & Mechanical & Automation Mechanical Mechanical Automobile Metallurgical Metallurgical & Material Science Metallurgy Production & Industrial Production Thermal Aerospace Industrial & Production Industrial Industrial & Management Manufacturing Science & Mechanical & Automation Mechanical Mechanical Automobile Metallurgical Metallurgical & Material Science - 15 /18-

16 Metallurgy Production & Industrial Production 4. APPLICATION PROCEDURE Application Procedure (i) Applicants are required to submit their application through on-line application system using the portal only. No other means of application shall be acceptable. (ii) There are two steps in online application procedure Step 1. Register by filling your personal details and pay fee by using payment link An application ID will be provided in this step, which will be required in step 2. Application fee is ` 1200/- for OPEN and OBC-NC candidates for each programme.. For SC/ST category admission fee is ` for each programme. Fee payment can be made by either online payment mode by credit/debit card, internet banking or offline mode by chalan. If online payment mode is opted, then after successful payment an e-receipt will be generated by admission portal. If offline payment is opted, then report any branch of State Bank of India with print out of the generated chalan and deposit application fee. Bank will provide a stamped receipt. This e-receipt/stamped clalan receipt will be required at the time of sending application form to MNNIT Allahabad. Step 2. Online filling of application form: Log-in with application ID provided in step 1 Before starting the online filling of application form, please make sure that you have soft copy of your passport size photograph in JPEG (up to 30 kb) format. After login, follow the instructions for filling application form. Take print out of the form, attach photocopy of all required documents [refer section 8(i)] and send on the address given below so as to reach before the due date: Admission Cell Office of the Dean (academic) Motilal Nehru National Institute of Technology Allahabad Allahabad Write on the top of envelop the name of the programme in which you are applying, for e.g. Application for M.Tech. (Part Time) in Department of Mechanical. Important Notes: (i) Separate application forms must be filled for courses offered by different departments along with the prescribed fee. If a candidate is applying in more than one department then preference of the department shall be clearly mentioned on each application form. However, separate fee is not required for separate courses offered by the same department. (ii) All declarations/results will be displayed on admission portal only. No separate letter will be issued by the institute for attending the written examination/document verification and counseling. (iii) Candidates are advised to visit the admission portal for regular updates. (iv) The selected candidate, who has completed all the pre-requisite examinations including project/thesis examination and the viva voce before the date of registration but is unable to produce the certificate in proof of having passed and secured the minimum specified qualifying marks, may be considered for provisional admission. However, if admitted provisionally, they will be required to produce the evidence of their having passed the qualifying degree - 16 /18-

17 examination before start of Mid Semester Examination, failing which the admission will automatically stand cancelled. 5. ADMISSION CRITERIA Admission will be based on written examination conducted by MNNIT Allahabad at MNNIT Allahabad campus and counseling to be held at MNNIT Allahabad. Please refer Important Dates. All applicants will be eligible for written examination and may report for written examination with the condition that candidates have themselves ascertained their eligibility as per the Information Brochure. Institute will verify eligibility only at the time of interview or date of document verification. 6. FEE STRUCTURE (a) Institute Fee (b) Mess charges Nature of Studentship All Intermediate Semester(s) 1 st Sem. Even Odd Hosteller ` 43,526 ` 40,975 ` 41,801 Day Scholar ` 42,151 ` 39,400 ` 40,426 Hostel Mess charges for the M.Tech. students in first semester is ` 15, and required to be deposited at the time of registration (in case hostel is allotted) in the form of demand draft drawn in favour of Chief Warden MNNIT Allahabad payable at Allahabad. However the mess charges may change and the same will be informed to the students. 7. IMPORTANT DATES (TENTATIVE) Start of online application process (Friday) Last date for online application (Friday), (up to PM for online fee submission. For offline fee submission up to bank timing) Last date for receipt of the printed and signed application form after filling online (Thursday) up to 5.30PM *Display of list of candidates for written examination (Thursday) Written examination at MNNIT Allahabad (Monday) Declaration of result of written examination Date for document verification and counseling Declaration of Ist list of result Last date for submission of Institute fee by candidates selected in Ist round Declaration of IInd list of result (Subject to vacancy) Last date for submission of Institute fee by candidates selected /18-

18 in IInd round Physical registration Commencement of classes * It is the responsibility of the candidates whose names appear in the list to ascertain themselves that they fully meet all the advertised criteria. In case it is found that any candidate who does not fulfill the criteria and yet has appeared in the interview/test or has been offered admission, his/her candidature/admission will be cancelled/terminated at any stage, without any compensation. 8. DOCUMENTS REQUIRED (i) Candidates are required to bring following documents at the time of counseling. [ Please enclose self attested photocopy of these documents with application form] : a. High School Certificate in original. b. Mark sheet/grade Sheet of qualifying examination in original. c. Character Certificate issued by the Head of the institution last attended. d. Certificate of sponsorship [For M.Tech. (Sponsored) only]. e. No. Objection certificate from employer [For M.Tech. (Part Time) only] f. OBC/SC/ST/PD certificate, if applicable. g. Undertaking by OBC candidates h. Migration certificate i. E-receipt / Stamped challan receipt (ii) Candidates are required to bring following documents at the time of registration: a. Admission letter (It will be issued by respective departments after submission of Institute fee) b. Passport size Photographs (3 Nos.). Note: The institute reserves the right to refuse admission to any candidate without assigning any reason. All disputes related to admission shall be subject to Allahabad Courts only. The number of seats may vary without prior notice. 9. ADDRESS FOR SENDING APPLICATION FORM The signed printed application form (generated after filling online) along-with E-receipt/chalan and photocopy of other testimonials as referred under the heading documents required must reach at the following address on or before up to PM: Admission Cell Office of the Dean (Academic) Motilal Nehru National Institute of Technology Allahabad Allahabad ID: admissioncell@mnnit.ac.in - 18 /18-