Edition Perfect combination 9 Power supplies Electronic P Edition kaging www clear order..biz information in the catalogue

Transcription

1 9 Power supplies

2 Übersicht PROLINE Overview... 0 Power supplies Cabinets... 1 Wall mounted cases... 2 slimpower AC/DC switched-mode power supply 42 W, 3 HP Compact and low interference Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 maxpower / ecopower AC/DC switched-mode power supplies W 1 3 output voltages Subracks/ 19" chassis... 6 Front panels, plug-in units... 7 maxpowerpro CPCI power supply AC/DC and DC/DC versions Systems... 8 Power supply units... 9 MPS series VMEbus power supplies 150 W and 224 W output performance Backplanes Connectors, front panel component system maxpower adjustable AC/DC switched-mode power supply 100 W, 6 U Output voltage continuously adjustable Appendix UK 04/2006

3 Power supplies Overview " compatible power supplies coolpower DC/DC switched-mode power supplies, 100 W Wide range mains/line input voltage AC/DC switchedmode PSUs Single, 42 W Single, 50 W Single, 100 W Single, adjustable, 100 W Single, 130 W Dual, 100 W Triple, 100 W Triple, 130 W Triple, 150/224 W Quad, 250 W Quad, 400 W Linear-mode power supplies AC/DC Very low interference Opimized for medical applications Open Frame PSUs Compact VMEbus power supplies Prepared for Schroff MPS systems AC/DC linear-mode PSUs Single, 8-60 W Dual, W Triple, 7-39 W DC/DC converters Single, 100 W Dual, 100 W Triple, 100 W Quad, 250 W, maxpowerpro Quad, 400 W Accessories Z-rail, 4 HP Connector H 15 F Keying/coding Wall/horizontal rail mounting Redundant solutions for Telecom 300 W up to 1000 W output performance High availability due to battery backup Open Frame power supplies AC/DC converters Triple, Quad, 200 W Triple, Quad, 400 W / 600 W Triple, Quad, 600 W / 800 W Power systems UK 04/

4 Power supplies 19" compatible AC/DC switched-mode power supply Single, 42 W slimpower 19" compatible AC/DC switched-mode power supply Width only 3 HP Wide range mains/line input voltage (from V AC and V DC ) Single output voltage with low interferences (Low Emission < 10 mvpp) Redundancy operation with integrated decoupling diode (can be activated) Passive Current Share Signalling: Output voltage OK width 3 HP connector H15M (assembled) SLE SLE SLE SLE Front panel 3 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces TE = HP Pin Connection 4 Output + V 1 6 Output + V 1 8 Sense line + V 1 10 Sense line 0 V 1 12 Output 0 V 1 14 Output 0 V Output OK L 30 N 32 PE Please order front panel separately Output data at T a = C For further information /oneclick 9.2 UK 04/2006

5 Power supplies 19" compatible AC/DC switched-mode power supply Single, 50 W ecopower 19" compatible AC/DC switched-mode power supply Wide range mains/line input voltage (from V AC and V DC ) Single output voltage Redundancy operation with integrated decoupling diode Active Current Share Bus (CSB) Signalling: Output voltage OK Efficiency up to 80% width A: 6 HP connector H15M (assembled) keying/coding peg (assembled) SEK SEK SEK SEK SEK Front panel 6 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Pin Connection 4 Output + V 1 6 Output + V 1 8 Sense line + V 1 10 Sense line 0 V 1 12 Output 0 V 1 14 Output 0 V CSB 24 Output OK L 30 N 32 PE DIJM0084 Please order front panel separately Output data at T a = C For further information /oneclick UK 04/

6 Power supplies 19" compatible AC/DC switched-mode power supply Single, 100 W maxpower Wide range mains/line input voltage (from V AC and V DC ) with active Power Factor Correction (PFC) 100 W at 6 HP Single output voltage Redundancy operation with integrated decoupling diode Active Current Share Bus (CSB) Signalling: Output voltage OK width A: 6 HP connector H15M (assembled) keying/coding peg (assembled) MAX MAX MAX MAX Front panel 6 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Pin Connection 4 Output + V 1 6 Output + V 1 8 Sense line + V 1 10 Sense line 0 V 1 12 Output 0 V 1 14 Output 0 V CSB 24 Output OK L 30 N 32 PE DIJM0084 Please order front panel separately Output data at mains/line voltage > 190 V AC, T a = C For further information /oneclick 9.4 UK 04/2006

7 Power supplies 19" compatible AC/DC switched-mode power supply Single, adjustable 100 W maxpower 19" compatible AC/DC switched-mode power supply Adjustable output voltage range Wide range input voltage (from V AC and V DC ) with active Power Factor Correction (PFC) Single output voltage Redundancy operation with integrated decoupling diode Active Current Share Bus (CSB) Signalling: Output voltage OK width A: 6 HP, output voltage pre-set at 12 V or 24 V respectively connector H 15M (assembled) keying/coding peg (assembled) MAX LR MAX UR Front panel 6 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Pin Connection 4 Output + V 1 6 Output + V 1 8 Sense line + V 1 10 Sense line 0 V 1 12 Output 0 V 1 14 Output 0 V CSB 24 Output OK L 30 N 32 PE DIJM0084 Please order front panel separately Output data at mains/line voltage > 190 V AC, T a = C For further information /oneclick UK 04/

8 Power supplies 19" compatible AC/DC switched-mode power supply Single, 130 W ecopower 19" compatible AC/DC switched-mode power supply Wide range mains/line input voltage (from V AC and V DC ) with active Power Factor Correction (PFC) Single output voltage Redundancy operation with integrated decoupling diode Active Current Share Bus (CSB) Signalling: Output voltage OK Efficiency up to 83% width A: 12 HP connector H 15M (assembled) keying/coding peg (assembled) SEG SEG SEG SEG Front panel 12 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Pin Connection 4 Output + V 1 6 Output + V 1 8 Sense line + V 1 10 Sense line 0 V 1 12 Output 0 V 1 14 Output 0 V CSB 24 Output OK L 30 N 32 PE DIJM0084 Please order front panel separately Output data at mains/line voltage > 190 V AC, T a = C For further information /oneclick 9.6 UK 04/2006

9 Power supplies 19" compatible AC/DC switched-mode power supply Dual, 100 W maxpower 19" compatible AC/DC switched-mode power supply Wide range mains/line input voltage (from V AC and V DC ) with active Power Factor Correction (PFC) 100W at 8HP 2 output voltages Efficiency up to 80% width A: 8 HP connector H 15M (assembled) keying/coding peg (assembled) V 2 : 24 V 1 : 12 V 2 : -12 V 1 : 15 V 2 : -15 I 1 : 9 I 2 : 4 I 1 : 9 I 2 : 2 I 1 : 4.2 I 2 : 4.2 I 1 : 3.4 I 2 : MAX MAX MAX MAX Front panel 8 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2pieces) Pin Connection Output + V 1 18 Output 0 V 1 20 Output + V 2 22 Output 0 V L 30 N 32 PE DIJM0084 Please order front panel separately Output data at mains/line voltage > 190 V AC, T a = C For further information /oneclick UK 04/

10 Power supplies 19" compatible AC/DC switched-mode power supply Triple, 100 W maxpower 19" compatible AC/DC switched-mode power supply Wide range mains/line input voltage (from V AC and V DC ) with active Power Factor Correction (PFC) 100W at 8HP 3 output voltages Signalling: Output voltage OK width A: 8 HP connector H15M (assembled) keying/coding peg (assembled) V 3 : -12 V 2 : 15 V 3 : -15 I 1 : 8 I 2 : 2.5 I 3 : 2.5 I 1 : 8 I 2 : 2 I 3 : MAX MAX Front panel 8 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Pin Connection 4 Output + V 1 6 Output + V 1 8 Sense line + V 1 10 Sense line 0 V 1 12 Output 0 V 1 (V 2 ) 14 Output 0 V 1 (V 2 ) 16 Output + V 2 18 Output 0 V 2 (V 1 ) 20 Output 0 V 3 22 Output - V 3 24 Output OK L 30 N 32 PE DIJM0084 Please order front panel separately Output data at mains/line voltage > 190 V AC, T a = C For further information /oneclick 9.8 UK 04/2006

11 Power supplies 19" compatible AC/DC switched-mode power supply Triple, 130 W ecopower 19" compatible AC/DC switched-mode power supply Wide range mains/line input voltage (from V AC and V DC ) with active Power Factor Correction (PFC) 3 output voltages Signalling: Output voltage OK width A: 12 HP connector H 15M (assembled) keying/coding peg (assembled) V 3 : -12 V 2 : 15 V 3 : -15 I 1 : 16 I 2 : 2.8 I 3 : 1.4 I 1 : 16 I 2 : 2.2 I 3 : SEG SEG Front panel 12 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2pieces) Please order front panel separateyl Output data at mains/line voltage > 190 V AC, T a = C Pin Connection 4 Output + V 1 6 Output + V 1 8 Sense line + V 1 10 Sense line 0 V 1 12 Output 0 V 1 (V 2.3 ) 14 Output 0 V 1 (V 2.3 ) 16 Output + V 2 18 Output 0 V 2.3 (V 1 ) 20 Output 0 V 2.3 (V 1 ) 22 Output - V 3 24 Output OK L 30 N 32 PE DIJM0084 For further information /oneclick UK 04/

12 Power supplies 19" compatible AC/DC switched-mode power supply Triple, 150/224 W 19" compatible AC/DC switched-mode power supply Wide range mains/line input voltage (from V AC and V DC ) with active Power Factor Correction (PFC) 3 output voltages VME bus signalling height 6 U width A: 8, 12 HP front panel with handle (assembled) connector H 15M(2 pieces, assembled) keying/coding peg (2 pieces, assembled) Voltage Current Power Width Description Order no. HP V 3 : -12 V 3 : -12 V 2 : 15 V 3 : -15 I 1 : 20 I 2 : 4 I 3 : 3 I 1 : 28 I 2 : 7 I 3 : 3 I 1 : 28 I 2 : 5.6 I 3 : (60) 8 MPS (84) 12 MPS (84) 12 MPS 022/ EMC contact strips 6 U, 232 mm, stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Output data at T a = C ( ): Output power V 2 + V 3 Pin Connection x1 (at top) Connection x2 (at bottom) 4 Output + V 1 ACFAIL 6 Output + V 1 SYSRESET 8 Output + V 1 10 Output + V 1 Current Share Bus 12 Output + V 1 Shutdown V 14 Sense line + V 1 GND Shutdown 16 Output - V 3 18 Output 0 V 1,2,3 20 Output 0 V 1,2,3 22 Output 0 V 1,2,3 24 Output 0 V 1,2,3 26 Output 0 V 1,2,3 28 Output + V 2 L 30 Output + V 2 N 32 Sense line 0 V 1 PE PSA44726 For further information /oneclick 9.10 UK 04/2006

13 geprüfte Sicherheit Power supplies 19" compatible AC/DC switched-mode power supply Quad, 250 W maxpowerpro 19" compatible AC/DC switched-mode power supply Wide range mains/line input voltage (from V AC ) with Power Factor Correction (PFC) 4 output voltages Connector P 47 Redundancy operation with Current Share Bus (CSB), Hot Swap Compact PCI signalling width A: 8 HP connector P 47 (assembled) front panel with handles and EMC contact strip (assembled) V 2 : 3.3 V 4 : -12 I 1 : 40 I 2 : 40 I 3 : 5.5 I 4 : CPCI 250 AC Power backplane with P 47 connector 3 U, width 39.6 mm, 1 x slot position P47, 1 piece Power backplane with P 47 connector 3 U, width 80.3 mm, 2 x slot positions P47 (side-by-side), 1 piece Power backplane with P 47 connector 6 U, width 39.6 mm, 1 x slot position P47 at top, 1 piece Power backplane with P 47 connector 6 U, width 39.6 mm, 2 x slot positions P47 above each other, 1 piece Guide rail IEEE, groove width 2.0 mm, with 0.1" offset SPQ 50 pieces Output data at T a = C with forced air cooling of 2 m/s Positronic P47 in accordance with CompactPCI standard For further information /oneclick UK 04/

14 Power supplies 19" compatible AC/DC switched-mode power supply Quad, 400 W maxpowerpro 19" compatible AC/DC switched-mode power supply Wide range input voltage range (from V AC ) with Power Factor Correction (PFC) 4 output voltages Connector P 47 Redundancy operation with Current Share Bus, Hot Swap Compact PCI signalling height 6 U width A: 8 HP connector P 47 (assembled) front panel with handles and EMC contact strip (assembled) V 2 : 3.3 V 4 : -12 I 1 : 50 I 2 : 80 I 3 : 7.5 I 4 : CPCI AC-6U Power backplane with P 47 connector 6 U, width 39.6 mm, 1 x slot position P47 at top, 1 piece Guide rail IEEE, groove width 2.0 mm, with 0.1" offset Standard Pack Quantity (SPQ) 50 pieces Output data for T a = C with forced cooling of 2 m/s Positronic P47 in accordance with CompactPCI Standard For further information /oneclick UK 04/2006

15 Power supplies 19" compatible AC/DC linear-mode power supply Single, 8 60 W 19" compatible AC/DC linear-mode power supply Mains/line voltage 230 V AC (with mains/line voltage conversion kit which can be switched to 115 V AC ) High control accuracy, low residual ripple and very low-interference, suitable for medical applications (8 mm safety gaps) PSM, PSG - Output voltage can be externally remote controlled ( V) - Switching of control curve for sensitive loads (V/A - Fold Back) - Current measurement via shunt width A: 6, 10, 14 HP connector H 15M (assembled) keying/coding peg (assembled) Pin PSK single PSM, PSG single 4 Sense line + V 1 Sense line + V 1 6 Output + V Output + V 8 Output + 0 V 1 Output +0 V 1 10 Sense line 0 V 1 Sense line 0 V 1 12 Optional: redundancy diode 14 External on/off 16 GND 18 V remote input + Vc 20 V-shunt + Vs 22 V-shunt Vs L L 30 N N 32 PE PE DIJM0084 Voltage Current Power Width Description Order no. HP PSK PSM PSG PSK PSM PSG PSK PSM PSG PSK PSM PSG Front panel for PSK 6 HP, 1 piece Front panel for PSM 10 HP, 1 piece Front panel for PSG 14 HP, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Mains/line voltage conversion kit 230 V to 115 V, 1 piece Please order front panel separately (Al, front anodised, rear colourless chromated with vertical slots for EMC contact strips, incl. assembly kit) PSK without case Output data at T a = C UK 04/

16 Power supplies 19" compatible AC/DC linear-mode power supply Dual, W 19" compatible AC/DC linear-mode power supply Mains/line voltage 230 V AC (with mains/line voltage conversion kit which can be switched to 115 V AC ) 2 output voltages (electrically isolated) High control accuracy, low residual ripple and very low-interference Suitable for medical applications (8 mm safety gaps) width A: 6, 10, 14 HP connector H 15M (assembled) keying/coding peg (assembled) Pin Connection 4 Sense line + V 1 6 Output + V 1 8 Output 0 V 1 10 Sense line 0 V 1 12 Sense line + V 2 14 Output + V 2 16 Output 0 V 2 18 Sense line 0 V L 30 N 32 PE DIJM0084 Voltage Current Power Width Description Order no. HP V 2 : 5 V 1 : 12 V 1 : 12 V 1 : 12 V 1 : 15 V 2 : 15 V 1 : 15 V 2 : 15 V 1 : 15 V 2 : 15 V 1 : 24 V 2 : 24 I 1 : 1.4 I 2 : 1.4 I 1 : 0.4 I 2 : 0.4 I 1 : 1 I 2 : 1 I 1 : 1.5 I 2 : 1.5 I 1 : 0.4 I 2 : 0.4 I 1 : 1 I 2 : 1 I 1 : 1.5 I 2 : 1.5 I 1 : 1.2 I 2 : PSM PSK PSM PSG PSK PSM PSG PSG Front panel for PSK 6 HP, 1 piece Front panel for PSM 10 HP, 1 piece Front panel for PSG 14 HP, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Mains/line voltage conversion kit 230 V to 115 V, 1piece Please order front panel separately (Al, front anodised, rear colourless chromated with vertical slots for EMC contact strips, incl. assembly kit) PSK without case Output data at T a = C 9.14 UK 04/2006

17 Power supplies 19" compatible AC/DC linear-mode power supply Triple, 7 39 W 19" compatible AC/DC linear-mode power supply Mains/line voltage 230 V AC (with mains/line voltage conversion kit which can be switched to 115 V AC ) 3 output voltages (electrically isolated) High control accuracy, low residual ripple and very low-interference Suitable for medical applications (8 mm safety gaps) width A: 6, 10, 14 HP connector H 15M (assembled) keying/coding peg (assembled) Pin Connection 4 Sense line + V 1 (PSM, PSG) 6 Output + V 1 8 Output 0 V 1 10 Sense line 0 V 1 (PSM, PSG) 12 Output + V 2 14 Output 0 V 2 16 Output + V 3 18 Output 0 V 3 20 Data save 22 Power failure 24 0 V for pin 20, L 30 N 32 PE DIJM0084 Voltage Current Power Width Description Order no. HP I 1 : 0.5 I 2 : 0.2 I 3 : 0.2 I 1 : 1.5 I 2 : 0.5 I 3 : 0.5 I 1 : 3 I 2 : 1 I 3 : PSK PSM PSG Front panel for PSK 6 HP, 1 piece Front panel for PSM 10 HP, 1 piece Front panel for PSG 14 HP, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Mains voltage conversion kit 230 V to 115 V, 1 piece Please order front panel separately (Al, front anodised, rear colourless chromated with vertical slots for EMC contact strips, incl. assembly kit) PSK without case Output data at T a = C For further information /oneclick UK 04/

18 Power supplies 19" compatible DC/DC converter Single, 100 W coolpower 19" compatible DC/DC converter Input voltage 20 up to 72 V DC 100 W only at 6 HP 1 output voltage, redundancy diode assembled External ON/OFF Electrical isolation between primary and secondary circuit Passive Current Share Bus width A: 6 HP connector H15M (assembled) keying/coding peg (assembled) CPDC CPDC CPDC CPDC Front panel 6 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Connection Connection V Pin V Pin V 4 Output + V 1 4 Output 6 Output + V V 8 Sense line + V 0 8 with diode 10 Sense line 0 V 1 10 Sense line 0 V 12 Output 0 V 1 12 Sense line 0 V 14 Output 0 V 1 14 Sense line 0 V used used used 22 used 22 used 24 Output OK Ext. ON/OFF* V E 28 +V E 30 0V E 30 0V E 32 PE 32 PE DIJM0084 Please order front panel separately For output voltages 24, 30 V with dual power supply CPDC 212 (2x12V, 2x15V) Input voltage V DC, see maxpower single page 9.4 For further information /oneclick 9.16 UK 04/2006

19 Power supplies 19" compatible DC/DC converter Dual, 100 W coolpower 19" compatible DC/DC converter Input voltage 20 up to 72 V DC 100 W only at 6 HP 2 output voltages or (1 output voltage V via internal redundancy diode V 1 D) Electrical isolation between primary and secondary circuit width A: 6 HP connector H15M (assembled) keying/coding peg (assembled) min.... max. V 1 : V 2 : I 1 : 4.5 I 2 : CPDC Front panel 6 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, 2 pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Pin Connection 4 Output + V 1 D 6 Output + V 1 D 8 Output + V 1 D 10 Output V 2 12 Output V 2 14 Output V 2 16 Output + V 1 18 Output V 1 /V 2 0 V 20 Output V 1 /V 2 0 V 22 Output V Input +Vi 30 Input 0 V 32 PE Please order front panel separately 1 output voltage via output pins V 1 D 24 V V, I 1 D 4.5 A, 108 W Output data at T a = 50 C Adjustment range 12 V V Input voltage V DC, see maxpower dual page 9.7 For further information /oneclick UK 04/

20 Power supplies 19" compatible DC/DC converter Triple, 100 W coolpower 19" compatible DC/DC converter Input voltage 20 up to 72 V DC 100 W only at 6 HP 3 output voltages, electrically isolated Electrical isolation between primary and secondary circuit External ON/OFF width A: 6 HP connector H15M (assembled) keying/coding peg (assembled) min.... max. V 1 :5 V 2 : V 3 : I 1 : 10 I 2 : 2 I 3 : 2 98 CPDC Front panel 6 HP, Al, front anodised, rear colourless chromated, with vertical slots for EMC contact strips, incl. assembly kit, 1 piece EMC contact strips Stainless steel, two pieces per front panel necessary, PU 10 pieces Coding PU (keying/coding peg, 1 piece, keying/coding pin 2 pieces) Pin Connection 4 Output + V 6 Output + V 1 8 Sense line + V 2 10 Sense line V 1 0V 12 Output V 1 0 V 14 Output V 1 0 V 16 Output + V 2 18 Output V 2 0V 20 Output + V 3 22 Output V 3 0V External ON/OFF 28 Input +Vi 30 Input 0 V 32 PE DIJM0084 Please order front panel separately Output data at T a = 50 C Adjustment range V 2, V V Input voltage V DC, see maxpower triple page 9.8 For further information /oneclick 9.18 UK 04/2006

21 geprüfte Sicherheit Power supplies 19" compatible DC/DC converter Quad, 250 W maxpowerpro 19" compatible DC/DC converter Input voltage 48 V DC (36 75V DC ) 4 output voltages Connector P 47 Outputs redundant with Current Share Bus (CSB), Hot Swap Compact PCI signalling width A: 8 HP connector P 47 (assembled) front panel with handle and EMC contact strip (assembled) V 2 : 3.3 V 4 : -12 I 1 : 40 I 2 : 40 I 3 : 5.5 I 4 : CPCI 250 DC Power backplane with P 47 connector 3 U, width 39.6 mm, 1 x slot position P47, 1 piece Power backplane with P 47 connector 3 U, width 80.3 mm, 2 x slot positions P47 (side-by-side), 1 piece Power backplane with P 47 connector 6 U, width 39.6 mm, slot position P47 at top, 1 piece Power backplane with P 47 connector 6 U, width 39.6 mm, 2 x slot positions P47 above each other, 1 piece Guide rail IEEE, groove width 2.0 mm, with 0.1" offset Standard Pack Quantity 50 pieces Output data at T a = C, with forced air cooling of 2 m/s Positronic P47 in accordance with CompactPCI standard For further information /oneclick UK 04/

22 Power supplies 19" compatible DC/DC converter Quad, 400 W maxpowerpro 19" compatible DC/DC converter Input voltage range 48 V DC ( V DC ) 4 output voltages Connector P 47 Outputs are redundant with Current Share Bus (CSB), Hot Swap Compact PCI signalling width A: 8 HP connector P 47 (assembled) front panel with handles and EMC contact strip (assembled) V 2 : 3.3 V 4 : -12 I 1 : 50 I 2 : 80 I 3 : 7.5 I 4 : CPCI DC-6U Power backplane with P 47 connector 6 U, width 39.6 mm, 1 x slot position P47 at top, 1 piece Guide rail IEEE, groove width 2.0 mm, with 0.1" offset Standard Pack Quantity (SPQ) 50 pieces Output data at T a = C with forced cooling of 2 m/s Positronic P47 in accordance with CompactPCI standard For further information /oneclick UK 04/2006

23 Power supplies 19" compatible Accessories Accessories Z-rail (item 6) Mating connector female H 15 F (item 1) Keying/coding (item 2) Wall/horizontal rail installation PSA45379 Z-rail, 4 HP 19" compatible Accessories For fixing the mating connector H 15 F onto the rear horizontal rail (item 6) Serves to create the standard mounting depth of the power supplies Description Qty / PU Order no. Z-rail, 4 HP (20.32 mm) Two Z-rails are required per connector a3-420 For further information /oneclick Connector H 15 F 19" compatible Accessories Mating connector H 15 (female connector) for wiring inputs/outputs (6.3 mm FASTON) In all 19" power supplies, the H 15 male connector is assembled; pin 32 with advanced protection contact Item Description Qty / PU Order no. 1 Connector H 15 F, wiring with FASTON connector 6.3 x 0.8 mm Detailed technical data... UK 04/

24 Power supplies 19" compatible Accessories Keying/coding Mechanical keying/coding prevents the assembly of a power supply at an incorrect slot position, required space 4 U Keying/coding - Female strip (item 2), assembled at power supply (except slimpower, maxpowerpro) - Assembly of keying/coding pin female strip (item1) on Z-/horizontal rail - Assembly of keying/coding pins (item 3) into keying/coding pin female strip (item 1) - Removal of noses at relevant position on the female strip 66 keying/coding possibilities with 2 keying/coding pins Description Keying/coding pin female strip Crastin (UL 94-V-0) 1 piece, keying/coding pin Crastin (UL 94-V-0) 2 pieces Order no. A Wall/horizontal rail installation 19" compatible Accessories Suitable for 19" 3 U compatible power supplies with 3 U 2 assembly possibilities: - Wall mounting bracket can be mounted in any position using screws; power supply is pushed in - Horizontal rail adaptor bracket is screwed onto the wall mounting bracket - the 19" power supply can therefore be clipped onto a horizontal rail Item Description Qty Order no. 1 Wall mounting bracket, St Horizontal rail adaptor bracket, Al For further information /oneclick 2 1 PSA UK 04/2006 Detailed technical data...

25 Power supplies Open Frame AC/DC switched-mode power supply Triple, Quad, 200 W Open Frame AC/DC switched-mode power supply 3 and 4 output voltage Automatic mains/line voltage switching 100 / 240 V AC VMEbus signalling Fan monitoring Open Frame power supply dimensions 66 x 127 x mm basic load A 1 = 2 A; for PE 3238/07 A 1 = 1 A additional fan output 24 V / 200 ma Bestellinformationen Voltage Voltage min.... max. Current Power Description Order no , M4 12 pin (AMP-MTA P) 3 x M4 Mains/Line (WAGO) V V 4 : 12 V 4 : 24 V 2 : 24 V 4 : I 1 : 35 I 2 : 7.5 I 3 : 5 I 1 : 30 I 2 : 7.5 I 3 : 4 I 4 : 3.5 I 1 : 30 I 2 : 7.5 I 3 : 4 I 4 : 2 I 1 : 30 I 2 : 4 I 3 : 4 I 4 : PE 3237/ PE 3238/ PE 3238/ PE 3238/ V1 + 8 pin (AMP-MTA 156-8P) M4 112 V 1 : 24 V 4 : I 1 : 6 I 2 : 7.5 I 3 : 4 I 4 : PE 3238/ Set of connectors with all input and output connectors x M4 Output data at T a = C Voltage min... max. = adjustment range Pin 12-pin connector 8-pin connector 1 Sense line + V1 Output + V2 2 Sense 0 V1 Output + V2 3 ACFAIL Output 0 V2 4 External on/off Output 0 V2 5 ACFAIL Output + V3 6 SYSRESET Output 0 V3 7 0 V Output + V4 8 FAN Fail Output 0 V4 9 0 V FAN 12 0 V FAN PS0F6590 For further information /oneclick UK 04/

26 Power supplies Open Frame AC/DC switched-mode power supply Triple, Quad, 400 W / 600 W Open Frame AC/DC switched-mode power supply For VME and VME64x applications Wide range input V AC 3 or 4 output voltage High performance Output performance 400 / 600 W (600 W at mains/line voltage > 180 V AC ) Open frame power supply dimensions 64 x 127 x 254 mm 1) V 2 : 3.3 1) V 4 : 12 I 1 : 60 I 2 : 10 I 3 : 4 I 1 : 60 I 2 : 35 I 3 : 10 I 4 : 4 1) 10 % basic load necessary 2) Power max. 400 W at 85 V AC V AC 470 2) MP4 2E-4LL ) MP4 2E-1D-4LL Set of connectors with all input and output connectors Output data at -20 C C Input: AC V ( Hz), DC V Output voltages adjustable, 10 % Signalling: Input ok, DC-Output ok Other output voltages available on request For further information /oneclick * Assembly holes identical on both sides UK 04/2006

27 Power supplies Open Frame AC/DC switched-mode power supply Triple, Quad, 600 W / 800 W Open Frame AC/DC switched-mode power supply For VME and VME64x applications Wide range input V AC 3 or 4 output voltage High performance Output performance 600 / 800 W (800 W at mains/line voltage > 180 V AC ) Open frame power supply dimensions 64 x 127 x 280 mm 1) V 2 : 3.3 1) V 4 : 12 I 1 : 120 I 2 : 17 I 3 : 17 I 1 : 120 I 2 : 10 I 3 : 4 I 1 : 60 I 2 : 17 I 3 : 17 I 1 : 60 I 2 : 60 I 3 : 10 I 4 : 4 1) 10 % basic load necessary 2) Power max. 600 W at 85 V AC V AC 800 2) MP6 3E-1L-1L ) MP6 3E-4LL ) MP6 2E-1L-1L ) MP6 2D-2E-4LL Set of connectors with all input and output connectors Output data at -20 C C Input: AC V ( Hz), DC V Output voltages adjustable, 10 % Signalling: Input ok, DC-Output ok Other output voltages available on request * Assembly holes identical on both sides For further information /oneclick UK 04/

28 Power supplies Power systems Power system 300 Power systems Redundant and uninterruptible DC power supply with battery backup Supply voltage 230 V AC ( V AC ), output voltage 56 V DC Output performance 100 up to 300 W redundant, scalable via number of plug-in power supplies (1 up to 4 units) Battery chassis 48 V/ 7 Ah assembled (buffer time approx. 20 min. at max. loading). Connection of external battery set possible (battery redundancy) Signalling of operating states via LED display and voltage-free relay contacts Item 1 1 Subrack,, width 84 HP, depth 275 mm 2 1 Cover and base, perforated for heat dissipation 3 1 Power bus backplane connects all power supplies and logic signals 4 1 Rear panel, 3 U / 72 HP can be hinged up 5 1 Power input with fuse 3 U / 12 HP (IEC 320 female connector) 6 1 Battery chassis, 3 U / 49 HP, 48 V / 7 Ah 7 1 Board space 3 U / 35 HP with guide rails for power supplies (7 HP, connector H 15) and control unit (7 HP) 8 1 Control unit 3 U / 7 HP, takes over battery and fault management (connector C64) PS PS Description Order no. Power system Power supply SEM 148C 3 U, 7 HP, 160 mm deep, output performance 100 W, output voltage 56 V DC, (incl. front panel), 1 piece Power supply SEC C 3 U, 7 HP, 160 mm deep, output performance 200 W, output voltage 56 V DC,(incl front panel), 1 piece Front panel, unshielded for covering of unused slots, piece Service connector for battery test, 1 piece Connection cable for connecting the external battery extension, 3 m, 1 piece Output connector cable for connecting the battery and the DC outputs for cable cross-section 4 mm², PU 50 pieces Front connection panel 1 U 84 HP, for connecting all DC inputs/outputs at the front, 1 piece Diagnosis software available on request For further information /oneclick PS UK 04/2006

29 Power supplies Power systems Power system 1000 Power systems Redundant and uninterruptible DC power supply with battery backup Supply voltage 230 V AC ( V AC ), output voltage 56 V DC Output performance 100 up to 1000 W redundant, scalable via number of plug-in power supplies (1 up to 11 units) Connection of up to two external battery sets. Buffer time depending on battery capacity > 2h Signalling of operating states via LED display and voltage-free relay contacts Item 1 1 Subrack,, width 84 HP, depth 275 mm 2 1 Cover and base, perforated for heat dissipation 3 1 Power bus backplane connects all power supplies and logic signals 4 1 Rear panel, 3 U / 72 HP can be hinged up 5 1 Power input with fuse 3 U / 12 HP (IEC 320 female connector) 6 1 Board space 3 U / 84 HP with guide rails for power supplies (7 HP, connector H 15) and control unit (7 HP) 7 1 Control unit 3 U / 7 HP, takes over battery and fault management (connector C64) PS PS Description Order no. Power system Power supply SEM 148C 3 U, 7 HP, 160 mm deep, output performance 100 W, output voltage 56 V DC, (incl. front panel), 1 piece Power supply SEC C 3 U, 7 HP, 160 mm deep, output performance 200 W, output voltage 56 V DC, (incl. front panel), 1 piece Front panel, unshielded for covering of unused slots, 1piece Battery type A 12 V/ 35 Ah incl. connecting cable, PU 4 pieces Battery type B 12 V/ 50 Ah incl. connection cable, can be assembled into 19" battery shelfs, PU 4 pieces Battery shelf 19" Subrack to hold 4 batteries type B, 1piece Service connector for battery test, 1 piece Connection cable for connecting the external battery pack, 3 m, 1 piece Output connector cable for connecting the battery and the DC outputs for cable cross-section 4 mm², PU 50 pieces Front connection panel 1 U 84 HP, for connecting all DC inputs/outputs at the front, 1 piece Diagnosis software available on request PS For further information /oneclick UK 04/