6 U CompactPCI Backplane with 8 Slots

Transcription

1 6 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. ERNI develops and manufactures backplanes according to ISO 900 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: 6305 (with upper P47-connector only) Part No: (with upper and lower P47-connectors) Features Form factor 6 U Dimension (WxH): mm x mm 8 slots, 7 peripheral slots; system slot on left hand side Operates at 33 MHz clock frequency Full 64-bit implementation on P3, P4, P5 at all Slots A and AB-shrouds with guides for safe mating of rear I/O transition modules Controlled impedance of 65 Ohm realized by stripline-technology Hot-swap features according to PICMG 2. R2.0 Best decoupling of supply voltages High-quality design with best EMC-characteristics by fully shielded 0-layer PCB Flexible grounding to chassis by fixing screws Connectors according to IEC and PICMG 2.0 R3.0 V(I/O) selectable by jumper element: 3.3 V or 5 V 2 connectors for fans with 2V power supply, additional 2 connectors for fan temperature control by NTC 2 connectors for drives with 5V/2V supply For use with modular power supply according to PICMG 2. R.0 Mounting holes for stiffening bar to prevent deflection during insertion and extraction of boards Extension/cascading feature with system slot right backplane and power backplane Accessories available: power backplane, power bridge Catalog E /02 Edition

2 +3,3V LP-Nr Made in Germany cpci 6U 8Slot SLP 2.0R3.0 Rear view power supply connector for drive (hard disk/ floppy/cd-rom) +2V FAN Front view z a b c d e f +3,3V JP connectors for fan and temp. control by NTC NTC2 +2V -2V Mounting holes for stiffening bar auxiliary signals INH PRST power supply connector for drive (hard disk/ floppy/cd-rom) +2V connectors for fan and temp. control by NTC NTC FAN System Management Bus according to PICMG 2.9 IPMB0 IPMB -2V -2V +2V +2V connections for extension to other modular backplanes V CompactPCI 64-Bit Bus CompactPCI 32-Bit Bus P Positronic 47-pin connector for power supplies according to PICMG 2. Rev..0 Printed in Germany Subject to modification without prior notice. +2V P System Slot Catalog E /02 Edition

3 6 U Compact PCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. ERNI develops and manufactures backplanes according to ISO 900 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: Part No: for use with redundant power supplies Features Form factor 6 U Dimension (WxH): mm x mm 8 slots, 7 peripheral slots, system slot on the right side PCI signal termination according to PICMG 2.0 Operates at 33 MHz clock frequency Full 64-bit implementation Rear I/O via P3, P4, and P5 possible at each slot A and AB-shrouds with guides for safe mating of rear I/O transition modules Controlled impedance of 65 Ohm realized by striplinetechnology Best decoupling of supply voltages High-quality design with best EMC-characteristics by fully shielded 0-layer PCB Flexible grounding to chassis by fixing screws Connectors according to IEC and PICMG 2.0 V(I/O) selectable by jumper element: 3.3 V or 5 V 2 connectors for fans with 2 V supply 2 connectors for drives with 5 V/2 V supply Various power supply options: 20 pin ATX connector Connection via Faston or M4-screw DIN style M connector according to PICMG 2. R.0 Secure separation between hazardous voltages in mains supply and SELV circuit according to IEC 950 Catalog E /03 Edition 3

4 Rear I/0 on 8 Slots Power via faston or M4-screw Rear view ATX-supply auxiliary signals ,3 mm Line power 2 auxiliary signals 2x power supply connector for drives (hard disk/floppy/cd-rom) 2x fan connector Line power 5 VAC / 230 VAC ,3 mm Front view Printed in Germany Subject to modification without prior notice. Catalog E /03 Edition 3

5 6 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI computer systems. Its highperformance features make it ideally suited for telecom, datacom, and industrial applications like CNCs, robotic controls, and video image processing. ERNI develops and manufactures backplanes according to ISO 900 at three productions sites around the world. Custom and semi-custom designs based on our standard backplanes are possible in various configurations. Part No: (with upper P47-connector only) Part No: (with upper and lower P47-connectors) Features Form factor 6 U Dimension (WxH): mm x mm 8 slots, 7 peripheral slots; system slot on right hand side Operates at 33 MHz clock frequency Full 64-bit implementation on P3, P4, P5 at all Slots A and AB-shrouds with guides for safe mating of rear I/O transition modules Controlled impedance of 65 Ohm realized by stripline-technology Hot-swap features according to PICMG 2. R2.0 Best decoupling of supply voltages High-quality design with best EMC-characteristics by fully shielded 0-layer PCB Flexible grounding to chassis by fixing screws Connectors according to IEC and PICMG 2.0 R3.0 V(I/O) selectable by jumper element: 3.3 V or 5 V 2 connectors for fans with 2V power supply, additional 2 connectors for fan temperature control by NTC 2 connectors for drives with 5V/2V supply For use with modular power supply according to PICMG 2. R.0 Mounting holes for stiffening bar to prevent deflection during insertion and extraction of boards Extension/cascading feature with system slot left backplane and power backplane Accessories available: power backplane, power bridge Catalog E /02 Edition 2

6 5V 3,3V 5V 3,3V Rear view 5V 3,3V JP4 Power supply connector for drive (hard disk / floppy / CD-Rom) +2V +2V -2V +2V -2V +2V -2V NTC2 FAN2 INH PRST IPMB0 IPMB NTC FAN +2V connectors for Fan and temp. control by NTC Mounting holes for stiffening bar Auxiliary Signals Power supply connector for drive (hard disk / floppy / CD-Rom) connectors for Fan and temp. control by NTC System-Management Bus according to PICMG 2.9 connections for extension to other modular backplanes Front view z a b c d e f 22 N L P E L N P E CompactPCI 64-Bit Bus CompactPCI 32-Bit Bus Printed in Germany Subject to modification without prior notice. +2V 2-2V Positronic 47-Pin connector for Power supplies according to PICMG 2. Rev.0 System Slot Catalog E /02 Edition 2