Xcellon-Flex 4x40GE QSFP+ Full Emulation Load Module

Transcription

1 Xcelln-Flex 4x40GE QSFP+ Full Emulatin Lad Mdule The advancement f high-density, high-perfrmance netwrk switches, ruters, aggregatin devices, netwrk appliances, and servers has accelerated since the standardizatin f 40GE in Ixia has cnsistently kept pace with the testing demands f netwrk equipment manufacturers (NEMs), service prviders, enterprises, and gvernments by cntinually increasing prt density and prtcl scalability. Highlights Xcelln is Ixia s high-perfrmance architecture fr testing next-generatin netwrks and devices. Wired and wireless netwrks are cnverging ver IP, and service prviders must ensure quality delivery f the bandwidthhungry, media-rich services that their custmers demand. Clud cmputing and data center cnvergence are changing the dynamics f business IT, while security threats are becming mre sphisticated by the day. All f these develpments pint t the need fr mre capable and scalable test slutins. Cmpatible with XM2, XM12HP, XG12, XGS12- SD, and XGS12-HS chassis Excellent 40GE QSFP+ prt density High-perfrmance multicre prcessr fr each 40GE QSFP+ prt fr high L2/3 and L4-7 prtcl perfrmance and scaledata center ready with PFC, FCE /FIP, LLDP/DCBX, VNTAG/VNIC, VEPA, FabricPath, TRILL, SPBM, OpenFlw, VXLAN, and PCS Lanes testing fr cmpliance t the IEEE802.3ba standard Xcelln-Flex: 4-prts f 40GE QSFP+ interfaces in a single-slt lad mdule Agura Rad Calabasas, CA USA Tel Dcument N.: Rev. E May Page 1

2 Ixia s Xcelln-Flex 4x40GE Full Emulatin lad mdule ffers the industry's leading 40GE QSFP+ prt density, with 4 prts n a single slt lad mdule, scaling up t 48 prts in a single XG12, XGS12, r XGS12-HS chassis. The 4x40GE Full Emulatin lad mdule has a rich L1-7 feature set and is well-suited fr mid-range prtcl emulatin and scale testing at an affrdable price. The lad mdule is ideal fr manufacturers f large-prt-cunt, cnverged data center switches. Used in cnjunctin with Ixia's test applicatins IxNetwrk TM and IxLad TM, Xcelln-Flex is best-in-class fr ecnmical, medium-perfrmance L2-7 testing at 40GE speeds. Tgether, Ixia s IxNetwrk and the Xcelln-Flex lad mdule supprt a cmprehensive prtfli f ruting and service emulatins fr next-generatin netwrks, including: Ruting & Switching: BGP4/BGP4+, OSPFv2/OSPFv3, ISISv4/v6, RIP/RIPng, EIGRP/EIGRPv6, PIM- SM/SSM, BFD, STP/RSTP/MSTP/PVST+/RPVST+, LACP, PLACP Data Center / SDN: PFC, FCE /FIP, LLDP/DCBX, VNTAG/VNIC, VEPA, FabricPath, TRILL, SPBM, OpenFlw, VXLAN, Segment Ruting ISIS MPLS: RSVP-TE/P2MP, LDP/MLDP, L3 MPLS VPN/6VPE, LDP L2VPN (PWE/VPLS), BGP VPLS, Multicast VPN Rsen Draft, NG Multicast VPN, EVPN/PBB-EVPN, MPLS OAM Access: DHCPv4/v6, PPPX/L2TP, ANCP, IPv6 Autcnfiguratin, DHCPv4/v6 ver EGRE, IGMP/MLD, Carrier Ethernet: Link OAM, CFM/Y.1731, PBB/PBB_TE, E-LMI, 1588v2 (PTP), ESMC, TWAMP Authenticatin: 802.1x, WebAuth, EAPUDP, Cisc NAC Key s Excellent 40GE QSFP+ prt density High L2/3 and L4-7 prtcl scalability PCS Lanes testing fr cmpliance t IEEE802.3ba standard Cmpatible with XM2, XM12HP, XG12, XGS12-SD, and XGS12-HS chassis Data center ready High perfrmance multicre prcessr fr each 40GE QSFP+ prt Supprts the IxNetwrk test applicatin that prvides: Service mdeling at Internet scale Rapid islatin f service vilatins TrueView cnvergence time measurement Carrier-class scaling End-t-end test autmatin prvides cmplete graphical user interface (GUI)-based test autmatin capabilities that supprt cnditinal test executin, device interactin via telnet, SNMP, and SYSLOG, and integrated statistics plling Basic and advanced traffic wizards, with Quick Flw Grups that prvide advanced traffic generatin and analysis tls, making it easy t cnfigure cmplex scenaris Easy-t-use prtcl wizards that quickly and precisely build cmplex netwrk tplgies Dynamic traffic cntrl per flw grup, with the ability t change rate and frame size n the fly Advanced measurements including fur latency mdes, delay variatin (jitter), inter-arrival time, sequence checking, misdirected packets, packet lss duratin, and Rx rates Page 2

3 Real-time statistics viewer with summary-level, grup-level, and per-flw statistics, as well as sphisticated results filtering and srting pwered by Flw Detective Multi-field ingress tracking t cncurrently track flws based n QS, surce/destinatin address, MPLS labels, VLAN IDs, and many ther cmmn prtcl fields Egress tracking prviding a unique ingress/egress results view that cmpares sent traffic with received traffic, s as t accurately verify DUT packet field mdificatins; QS remarking is easily verified IxNetwrk statistics viewer, a pwerful tl fr viewing and analyzing real-time results and generating test reprts Autmated QuickTests fr industry-standard test methdlgies, including RFC 2544 and many mre Easy ne-click TCL, HLTAPI, r HLPAPI autmatin using ScriptGen, with cmplete API supprt prviding cmplete autmatin f IxNetwrk functins Fr mre infrmatin n IxNetwrk, please visit the IxNetwrk prduct prtal at: Fr mre infrmatin n IxLad, please visit the IxLad prduct prtal at: Lad Mdule Specificatins Lad mdule mdel Number f prts per lad mdule Xcelln-Flex 4x40GE QSFP+ Full Emulatin Lad Mdule FlexFE40G4Q 4-prts f 40GE QSFP+ Chassis slts per mdule 1 Maximum prts per chassis: QSFP+ media supprt XGS12-SD: 48-prts 40GE QSFP+ XGS12-SD rackmunt: 48-prts 40GE QSFP+ XG12 rackmunt (6000W): 48-prts 40GE QSFP+ XM12 High Perfrmance (4000W): 24-prts 40GE QSFP+ 1 XM2 Desktp: 4-prts 40GE QSFP+ 1 40GBASE-SR4 and 40GRBASE-LR4 pluggable, ptical transceivers 40GBASE-SR4 active ptical fiber cables (AOC) 40GBASE-CR4 passive, cpper direct attached cables up t 5 meters in length 1 Simultaneus peratin f up t six FlexFE40G4Q lad mdules requires an XM12 High Perfrmance rackmunt chassis with 4000W pwer capacity ( ). If a standard XM12 chassis ( ) is t be used with these lad mdules then cnversin t the High Perfrmance mdel is required. A field-replaceable pwer supply upgrade kit ( ) is available fr this purpse. When ne r mre FlexAP1040SQ lad mdules is installed in an HM12 High Perfrmance chassis the maximum ttal number f lad mdules that may be installed at ne time in a single chassis is limited t the ttal available pwer. Please cnsult an Ixia factry representative fr pwer calculatins fr specific cnfiguratin f lad mdules. The XM2 prtable chassis ( ) supprts up t 1 FlexFE40G4Q lad mdule. N ther lad mdule may be installed in the XM2 prtable chassis when a FlexFE40G4Q lad mdule is installed. Page 3

4 Multi-cre prcessr technlgy Interface prtcls Data center prtcls (see ptinal upgrades fr DCBX, FCE, FCF) Layer 2-3 ruting prtcl emulatin supprt Capture buffer per prt Transmit engine Yes Xcelln-Flex 4x40GE QSFP+ Full Emulatin Lad Mdule IEEE802.3ae10GE LAN IEEE802.3ba 40GBASE-R LAN PFC, FCE /FIP, LLDP/DCBX, VNTAG/VNIC, VEPA, FabricPath, TRILL, SPBM, OpenFlw, VXLAN, Segment Ruting ISIS Yes 256MB Wire-speed packet generatin with timestamps, sequence numbers, data integrity signature, and packet grup signatures Stream definitins per prt Number f transmit flws per prt (sequential values) Number f transmit flws per prt (PGID) Table UDF User defined field features Data field per stream Frame length cntrls Errr generatin IPv4, IPv6, UDP, TCP checksum Receive engine Trackable receive flws Billins 1 millin 1 millin entries Fixed, increment, r decrement by user-defined step, value lists, cascade, randm, and chained Fixed, increment (byte/wrd), decrement (byte/wrd), randm, repeating, userspecified Fixed, randm, weighted randm, r increment by user-defined step CRC (gd/bad), undersize, versize Hardware checksum generatin and verificatin Wire-speed packet filtering, capturing, real-time latency, and inter-arrival time fr each packet grup, data integrity, and sequence checking 64K per prt 2 In the Data Center Bridging mde the number f transmit streams per prt n the FlexFE40G4Q lad mdule is 256 streams. Page 4

5 Xcelln-Flex 4x40GE QSFP+ Full Emulatin Lad Mdule Filters Statistics and rates (cunter size: 64 bits) Flw cntrl Link fault signaling at 40GE Latency measurements Intrinsic latency adjustment Transmit line clck adjustment 40GE physical cding sublayer (PCS) test features: 48-bit surce/destinatin address, 2x128-bit user-definable pattern and ffset, frame length range, CRC errr, data integrity errr, sequence checking errr (small, big, reverse) Link state, line speed, frames sent, valid frames received, bytes sent/received, fragments, undersize, versize, CRC errrs, VLAN tagged frames, 6 userdefined stats (UDS), capture trigger (UDS 3), capture filter (UDS 4), 8 QS cunters, data integrity frames, data integrity errrs, sequence checking frames, sequence checking errrs, ARP, and ping requests and replies IEEE802.03x PAUSE frame cntrl IEEE802.1Qbb (PFC) Generate lcal and remte faults with cntrls fr the number f faults and rder f faults, plus the ability t select the ptin t have the transmit prt ignre link faults frm a remte link partner 2.5ns reslutin in packet timestamp Ability t remve inherent latency frm 40GE prt electrnics when used with MSA-cmpliant 40GE transceivers Ability t adjust the parts per millin (ppm) line frequency ver a range f -100 t +100 ppm IEEE 802.3ba-cmpliant PCS transmit and receive side test capabilities Per PCS lane, transmit lane mapping Per PCS lane, skew insertin capability Per PCS lane, lane marker, r lane marker and paylad errr injectins Per PCS lane, receive lanes statistics Supprts all cmbinatin f PCS lane mapping: Default, Increment, Decrement, Randm, and Custm User-selectable frm zer up t 3 micrsecnds f PCS Lane skew insertin n the transmit side. User-selectable ability t inject errrs int the PCS Lane Marker and simultaneusly int PCS Lane Marker and Paylad fields. This includes the ability t inject sync bit errrs int the Lane Marker and Paylad. User can cntrl the PCS lane, number r errrs, and perid cunt; and manage the repetitin f the injected errrs. PCS Sync Header and Lane Marker Lck, Lane Marker mapping, Relative lane deskew up t 52 micrsecnds, Sync Header and PCS Lane Marker Errr cunters, indicatrs fr Lss f Synch Header and Lane Marker, BIP8 errrs Page 5

6 Xcelln-Flex 4x40GE QSFP+ Full Emulatin Lad Mdule Operating temp. range 41 F t 86 F (5 C t 30 C), ambient air temperature 3 Lad mdule dimensins (L) x (W) x 1.28 (H) 429mm (L) x 305mm (W) x 33mm (H) Weight Mdule nly: lbs (5.25 kg) Shipping: lbs (6.29 kg) Applicatin Supprt Xcelln-Flex 4x40GE QSFP+ Full Emulatin Lad Mdule IxExplrer TM : Layers 1, 2, and 3 wire-speed traffic generatin, capture, and analysis. IxExplrer Tcl API: Custm user script develpment fr layer 1-3 testing. IxNetwrk: prvides wire-rate traffic generatin with service mdeling that builds realistic, dynamically-cntrllable data-plane traffic. IxNetwrk ffers the industry's best test slutin fr functinal and perfrmance testing by using cmprehensive emulatin fr ruting, MPLS, VPLS, high-availability, IP multicast, switching, carrier Ethernet, bradband, and DCB prtcls. IxNetwrk Tcl API: custm user script develpment fr layer 2-7 testing. IxAutmate: ffers a pwerful, custmizable test tl t autmate the perfrmance, scalability, and functinal testing f netwrk devices. It has a simple-t-use GUI t cnfigure custm autmated test scenaris and analyze test results. IxAutmate prvides a rich suite f pre-built tests based n industry-standard RFCs. Test results are cllected and presented with a flexible set f functins, including real-time graphs presenting test executin prgress, frmatted reprts fr detailed pst-test analysis, clr-cded indicatins f test trial pass/fail utcme, and detailed test executin lgs. As a test harness, IxAutmate ffers a plug-in architecture designed t easily add custm tests t its substantial test library. 3 When an Xcelln-Flex lad mdule is installed in an XM12 chassis, the maximum perating temperature f the chassis is 30 C (86 F) ambient air temperature. Page 6

7 Prduct Ordering Infrmatin FlexFE40G4Q 4x40GE QSFP+ Lad Mdule Xcelln-FlexFE40G4Q 40 Gigabit Ethernet Full Emulatin Lad Mdule, 4-prts f QSFP 40 GE with L2-3 supprt. The lad mdule is cmpatible with XGS12-SD rackmunt chassis bundle ( ), XGS12-HS rackmunt chassis bundle ( ), XG12 rackmunt chassis ( ), XM12 HP rackmunt chassis ( ), and XM2 desktp chassis ( ). REQUIRES: One r mre QSFP+ 40GBASE-SR4 ( ) r 40GBASE-LR4 ( ) ptical transceivers and MT 12-fiber MMF cable, 3-meter length ( ). NOTE: If XM12-01 ( ) chassis is used with this lad mdule, the FRU-OPTIXIAXM12-01 ( ) pwer supply upgrade kit must be installed. Xcelln-Flex QSFP+ 40GE transceiver and cable ptin: QSFP+ 40GE, 40GBASE-SR4 ptical transceiver, pluggable, MMF, 850nm. This transceiver is cmpatible with the fllwing Ixia lad mdules and CFP-t-QSFP interface adapters: Xcelln-Multis XM10/40GE12QSFP+FAN 40-Gigabit Ethernet QSFP lad mdule ( ), Xcelln-Multis XM10/40GE6QSFP+FAN 40-Gigabit Ethernet QSFP lad mdule ( ), Xcelln Flex10G/40GSQ 10/40 Gigabit Ethernet Accelerated Perfrmance lad mdule ( ), Xcelln-FlexFE40G4Q 40 Gigabit Ethernet Full Emulatin lad mdule ( ), HSE40GEQSFP1-01, 40-Gigabit Ethernet lad mdule ( ). CFP-t-QSFP+ Interface Adapter, 1-prt ( ), and the CFP-t-QSFP Dual Interface Adapter, 2-prt ( ) QSFP+ 40GE, 40GBASE-LR4, ptical transceiver, pluggable, SMF, 1310nm. This is cmpatible with the fllwing Ixia lad mdules: Xcelln-FlexAP10/4016SQ 10/40 Gigabit Ethernet Accelerated Perfrmance lad mdule ( ), Xcelln-FlexFE40G4Q 40 Gigabit Ethernet Full Emulatin lad mdule ( ), Xcelln-Multis XM10/40GE12QSFP+FAN 40-Gigabit Ethernet QSFP lad mdule ( ), and Xcelln-Multis XM10/40GE6QSFP+FAN 40-Gigabit Ethernet QSFP ( ) MT 12-Fiber Multimde cable fr 40GBASE-SR4 ptical transceivers with MT Flat F-F cnnectrs, 850nm, three meter length. Page 7