AD12 What s new with Integrated Architecture Builder

Size: px

Start display at page:

Download "AD12 What s new with Integrated Architecture Builder"

Molly Greene
8 years ago
Views:

1 AD12 What s new with Integrated Architecture Builder

Integrated Architecture Builder - IAB Rules-based, Helps Insure Valid Configurations Comprehensive Hardware Configuration Detailed Hardware, Network, and Architecture Views Quickly Compare

2 Integrated Architecture Builder - IAB Rules-based, Helps Insure Valid Configurations Comprehensive Hardware Configuration Detailed Hardware, Network, and Architecture Views Quickly Compare Alternative Solutions Create Detailed System Configuration Integrated with other Selection Tools Built-in Learning Aids Built-in Learning Aids Engineering Tool: Enables users to efficiently generate configurations of networks, controllers, I/O, Visualization and other devices with a bill of material Quickly create a system configuration to visualize and quote the RA solution

3 Who Uses IAB? 2014

4 Why use IAB? To create a quick system configuration Allowing system requirement changes on the fly so the user can create alternative configurations for comparison Create a detailed system configuration Including a costed bill of material, graphics, and customized report

5 What can you configure in IAB? Logix Controllers ControlLogix, CompactLogix MicroLogix Controllers Micro800 Controllers NetLinx Networks EtherNet/IP, DeviceNet, ControlNet Other Networks DH+, DH485, RIO & other Non-CIP networks On-Machine Cabling 3-Phase, Control, & Auxiliary Power Media Process Control Systems Software (add to BOM) Motion Control Axes CIP and SERCOS PowerFlex Drives via RAISE configurator DeviceNet enabled devices Sensors, switches, etc. EOI/HMI PanelView, PanelView Plus, computers, etc. Encompass Partners AMCI, Endress + Hauser, EPLAN, Hardy, Helm, HMS, Mettler & Toledo, Molex, OLDI, Panduit, Phoenix Digital, ProSoft, Spectrum, Pyramid Solutions, RACO

6 Begin your Configuration or get Help from the IAB Start Page Launch IAB from your desktop and the Start Page will guide you to starting an IAB Project or take you to Help items

7 IAB Multi-Window User Interface N A VI G A TI O N GRAPHICAL VIEWS Windows can be hidden, docked, floated, and rearranged P R O P E R TI E S DEVICE LISTS COMPONENT DESCRIPTIONS

8 IAB Product Documentation by module

9 IAB Product Documentation via the IAB Bookshelf

10 IAB Subsystem Wizards Provide Speed & Convenience Specify requirements in wizard IAB automatically creates network, controller, and required I/O and comm. modules

11 Or if you know what you want, create a workspace and drag and drop

12 Detailed EtherNet/IP Views and Cabling Selection Infrastructure Switch Ring/Linear

13 Configure On-Machine Cabling from Module to End Device

14 Add Software to Bill of Materials Selected items are added to the IAB bill of materials

2) Configure motion axes in Motion Analyzer 3) When you are finished

15 Configuring SERCOS Motion Control in IAB 1) In IAB, launch Motion Analyzer for a SERCOS module. 2) Configure motion axes in Motion Analyzer 3) When you are finished motion components are added to the IAB bill of materials and motion documentation is added to the IAB report

16 Configuring CIP Motion Control in IAB

17 IAB Bill of Materials Select Organized, Consolidated, or Positional BOM

18 IAB Export to Other Applications BOM & Configuration Data Excel XML RSLogix Architect E-Plan ProposalWorks Powerpoint/Impress Visio

19 IAB Project Completeness Wizard Error, Warnings and Information Messages are provided.

20 IAB Report IAB report can include: BOM, graphics, hardware lists, performance data, Motion Analyzer report

21 IAB / ProposalWorks Integration Export IAB project to ProposalWorks or Launch IAB from within ProposalWorks Integrate IAB and ProposalWorks projects in a single file (.prp)

22 List of Encompass Partners in IAB 18 Encompass Partners, with more than 750 products & accessories are in IAB

23 IAB I/O Ready Cables v9.5 On I/O module, select Add On-Machine Select I/O Ready Cable as Wiring Type Select cable and length Icon appears below module I/O Ready cable added to BOM

24 User Tips IAB User Tips & New 2014 Features Use Favorites to create fully populated chassis or controllers for faster project creation Use Proposal Works and IAB together to add drawings Use the CompactLogix Wizard with the 1769-AENTR Use the Advanced Communication Details to check system capacity Use the Company-Specific Device List to see only what you want to see Use the Project Design Assistant to quickly compare and contrast Logix solutions Use the ROI Tool to determine savings (coming soon)

25 User Tips IAB User Tips & New 2014 Features Re-design of the User Defined Device (UDD) to allow for more complex EtherNet/IP devices (DLR, multiple CIP connections) Enable Manual Navigation to the Device List for faster addition of UDD to the project Addition of the Safety tab for easier selection of safety devices Point I/O connections count, errors and warnings are now in the Hardware View for faster development without errors

26 User Tips IAB Favorites to Save Time Use Favorites to create fully populated chassis or controllers Allows for faster project creation Share your Favorites with others Combine your Favorites from others Just drag & drop fully configured items!

27 Use w/ PW Get Drawings For Completeness Use IAB from within Proposal Works Must be online Drag over the IAB Report, module drawings and wiring diagrams Use drawings during installation

28 1769-AENTR New CompactLogix Wizard New CompactLogix Wizard EtherNet/IP & DeviceNet 1769-AENTR

29 EIP Capacity Advanced Communication Details Check Controller, Scanners, Adapters & Motion Capacity See separate presentation on this topic Allows you to fix capacity issues before you buy and build!

30 User Tips IAB Advanced EtherNet/IP Capacity Checker Make sure Controllers, Scanners and Adapters are not overloaded!

31 User Tips IAB Company-Specific Device List to Limit Spares and Cost Limit what devices can be used to save on design, installation and spares cost Up to 5 categories of product can be created Each category can have a unique color and use message

32 Project Design Assistant Project Design Assistant Quickly select and configure a Logix control system Compare and contrast up to 5 Logix control systems at a time

33 Project Design Assistant Perform Analysis complete Status indicator no longer gray, est. price shown

34 Project Design Assistant Review the Performance of each solution

35 UDD Re-design of User Defined Devices Allows for more detailed EtherNet/IP connection information like DLR, default RPI and multiple CIP connections More accurate models for more accurate capacity calculations!

36 Navigation Device List Manual Navigation Option Speeds up the selection process!

37 Safety Device List Safety Tab Safety devices now have their own tab in the Device List 440R-ENETR with safety relays and 440C-CR30 have been added Speeds up the selection process!

38 Point I/O Connection Count, Errors & Warnings Properties window in Point I/O Hardware View keeps running count of connections Design faster with fewer mistakes!

39 ROI Tool Coming soon Return On Investment Using industry specific data, product data and the project life cycle, calculate your savings

2015 Changes to IAB IAB User Tips & New 2015 Features January v9.6.0.1 version used for new the new PST DVD, 1444 Dynamix Condition Monitoring products added, Encompass Partner Molex Logix SST products added, Adv.

40 2015 Changes to IAB IAB User Tips & New 2015 Features January v version used for new the new PST DVD, 1444 Dynamix Condition Monitoring products added, Encompass Partner Molex Logix SST products added, Adv. Comm. Details added to the Hardware Properties View for Logix controllers and 1756 EtherNet/IP adapters, added Set RPIs button to I/O tab of Adv. Comm. Details, allow mix and match of XT and std product in a 1756 chassis, and misc bug fixes Planned February v enhancements to 1444 Condition Monitoring, Encompass Partner WIN911 product added, and misc bug fixes

41 AD12 WHATS NEW IN - IAB THANK YOU!

Integrated Architecture Design and Configuration Tools

Electrical Lighting Automation DataComm Integrated Architecture Design and Configuration Tools -PRESENTED BY Thomas House and Dennis Ward Rockwell Automation Experience the Difference! IA Tools Website